diff --git a/.github/workflows/pull.yml b/.github/workflows/pull.yml
index a190dc132d1..30d3849a25e 100644
--- a/.github/workflows/pull.yml
+++ b/.github/workflows/pull.yml
@@ -1727,3 +1727,22 @@ jobs:
             echo "Neutron backend library not found!"
             exit 1
         fi
+
+  nxp-mcuxpresso-test:
+    name: nxp-mcuxpresso-test
+    uses: pytorch/test-infra/.github/workflows/linux_job_v2.yml@main
+    permissions:
+      id-token: write
+      contents: read
+    with:
+      runner: linux.2xlarge
+      docker-image: ci-image:executorch-ubuntu-22.04-arm-sdk
+      submodules: 'recursive'
+      ref: ${{ github.event_name == 'pull_request' && github.event.pull_request.head.sha || github.sha }}
+      timeout: 90
+      script: |
+        # The generic Linux job chooses to use base env, not the one setup by the image
+        CONDA_ENV=$(conda env list --json | jq -r ".envs | .[-1]")
+        conda activate "${CONDA_ENV}"
+
+        ./examples/nxp/mcuxpresso/imxrt700/executorch_cifarnet/test_build_from_scratch.sh
diff --git a/docs/source/backends/nxp/nxp-mcuxpresso-example.md b/docs/source/backends/nxp/nxp-mcuxpresso-example.md
new file mode 100644
index 00000000000..8f8bb93fda3
--- /dev/null
+++ b/docs/source/backends/nxp/nxp-mcuxpresso-example.md
@@ -0,0 +1,139 @@
+# Using the MCUXpresso Example
+
+This example demonstrates how to build and run the ExecuTorch CifarNet application for the NXP RT700 platform using the MCUXpresso SDK and the GNU Arm Embedded Toolchain. Before building the project, make sure that all required dependencies are installed and that the necessary environment variables are configured correctly.
+
+> **Tip:** The `test_build_from_scratch.sh` script automates all the steps described in this guide, including downloading the ARM GNU toolchain, preparing the model, and downloading the MCUXpresso SDK using the `west` tool. If you prefer a fully automated setup, you can run it directly instead of following the manual steps below.
+
+All scripts described in this guide are located in the following directory of the ExecuTorch repository:
+
+```text
+examples/nxp/mcuxpresso/imxrt700/executorch_cifarnet/
+```
+
+## 1. Install the Arm GNU Toolchain
+
+First, download the Arm GCC cross-compilation toolchain that is supported by the RT700 platform:
+
+```text
+https://developer.arm.com/-/media/Files/downloads/gnu/15.2.rel1/binrel/arm-gnu-toolchain-15.2.rel1-x86_64-arm-none-eabi.tar.xz
+```
+
+After extracting the archive, create an environment variable called `ARMGCC_DIR` that points to the root directory of the toolchain installation. The build scripts use this variable to locate the compiler, linker, and other required tools.
+
+Example on Linux:
+
+```bash
+export ARMGCC_DIR=/path/to/arm-gnu-toolchain-15.2.rel1-x86_64-arm-none-eabi
+```
+
+To verify the installation, you can run:
+
+```bash
+$ARMGCC_DIR/bin/arm-none-eabi-gcc --version
+```
+
+The command should print the installed compiler version.
+
+## 2. Download the MCUXpresso SDK
+
+Next, download MCUXpresso SDK for the RT700 device family using the west tool:
+
+```bash
+pip install west
+west init -m https://github.com/nxp-mcuxpresso/mcuxsdk-manifests.git mcuxpresso-sdk
+pushd mcuxpresso-sdk
+west update_board --set board mimxrt700evk
+popd
+```
+
+Afterwards, configure the `SdkRootDirPath` environment variable to point to the mcuxsdk directory in the downloaded dir.
+
+Example on Linux:
+
+```bash
+export SdkRootDirPath=/path/to/mcuxpresso-sdk/mcuxsdk
+```
+
+The build system relies on this variable to locate board support packages, middleware components, startup code, linker scripts, and device-specific libraries.
+
+## 3. Prepare the Model Header File
+
+Before building the application, a compiled model must be provided as a C header file named `model_pte.h` and placed in the current directory. Run the provided helper script to generate it:
+
+```bash
+./prepare_model.sh
+```
+
+The script performs the following steps:
+
+1. Installs ExecuTorch and its Python dependencies.
+2. Installs the `eiq-neutron-sdk` Python package in the version that has been tested with the current ExecuTorch release.
+3. Compiles the CifarNet model using the NXP ExecuTorch ahead-of-time (AoT) pipeline and produces a `.pte` model file.
+4. Converts the `.pte` file into the `model_pte.h` C header, with the correct memory-section attributes for the RT700 target.
+
+> **Important:** The MCUXpresso SDK package includes a pre-built CifarNet model and a set of Neutron libraries, but this build flow deliberately does **not** use either of them. Instead, `prepare_model.sh` installs the `eiq-neutron-sdk` version that was tested with the current ExecuTorch release, compiles the model from scratch, and the linker later picks up the matching Neutron libraries from that same installation. This keeps the ExecuTorch AoT compiler, the model bytecode, the Neutron driver, the Neutron firmware, and the ExecuTorch runtime all in sync.
+
+Once the script finishes, verify that `model_pte.h` was created in the project directory before proceeding to the build step.
+
+## 4. Build the Application
+
+Once the environment variables have been configured and `model_pte.h` is present in the project directory, set the `NEUTRON_LIB_DIR` variable to the directory that contains the Neutron static libraries shipped with the eiq-neutron-sdk:
+
+```bash
+export NEUTRON_LIB_DIR=/path/to/eiq_neutron_sdk/libs
+```
+
+The build script expects the following libraries to exist in that directory:
+
+- `libNeutronDriver.a`
+- `libNeutronFirmware.a`
+
+Then build the project by executing the provided script:
+
+```bash
+./build_example.sh
+```
+
+The script validates all required inputs, configures CMake, compiles the source code, links the application, and generates the executable image:
+
+```text
+flash_release/executorch_cifarnet.elf
+```
+
+If the build completes successfully, the ELF file will be available and ready for programming onto the target board.
+
+## 5. Flash the Application
+
+The generated application can be programmed onto the RT700 device using SEGGER J-Link tools.
+
+### Linux
+
+```bash
+echo "loadfile flash_release/executorch_cifarnet.elf" | \
+/opt/SEGGER/JLink_V796k/JLinkExe \
+    -IF SWD \
+    -speed auto \
+    -Device MIMXRT798S_M33_0
+```
+
+Before flashing, ensure that:
+
+- The board is powered on.
+- The JLink debugger probe is flashed on device, if not see [documentation](https://mcuxpresso.nxp.com/mcuxsdk/latest/html/boards/RT/mimxrt700evk/gettingStartedXplorer/topics/program_lpc-link2_with_segger_j-link.html) how to flash it.
+- The J-Link debugger is connected to the target.
+- The SWD interface is available and correctly wired.
+- No other debugging application is currently using the J-Link connection.
+
+The programming process typically takes only a few seconds. Once the image has been loaded successfully, the application can be started directly from flash memory.
+
+## 6. Running the Example
+
+After the firmware is programmed, reset the board and open a serial terminal connected to the device's debug UART interface. The application will initialize the hardware, load the embedded CifarNet model, and begin performing image inference.
+
+During execution, inference results and diagnostic messages are printed to the terminal. The included demonstration image contains a cat, and the model is expected to classify the image accordingly.
+
+A successful run produces output similar to the following:
+
+![example](terminal.png "Example")
+
+This example serves as a basic validation that the ExecuTorch runtime, model integration, SDK configuration, and hardware platform are all functioning correctly. It can also be used as a starting point for evaluating custom neural network models and experimenting with on-device machine learning workloads on the RT700 platform.
diff --git a/docs/source/backends/nxp/nxp-overview.md b/docs/source/backends/nxp/nxp-overview.md
index 581c375d038..604b480e614 100644
--- a/docs/source/backends/nxp/nxp-overview.md
+++ b/docs/source/backends/nxp/nxp-overview.md
@@ -52,6 +52,11 @@ For more finegrained tutorial, visit [this manual page](https://mcuxpresso.nxp.c
 For guideline how to update the eIQ Neutron Runtime on MCUXpresso SDK, follow the instructions from the eIQ Neutron SDK package `docs/NeutronSDKUserGuide.md` available
 here https://www.nxp.com/design/design-center/software/eiq-ai-development-environment/eiq-toolkit-for-end-to-end-model-development-and-deployment:EIQ-TOOLKIT.
 
+## Using the MCUXpresso Example
+
+[This page](nxp-mcuxpresso-example.md) demonstrates how to build and run the ExecuTorch CIFARNet example from MCUXpresso SDK.
+
+
 ## Reference
 
 **→{doc}`nxp-partitioner` — Partitioner options.**
diff --git a/docs/source/backends/nxp/terminal.png b/docs/source/backends/nxp/terminal.png
new file mode 100644
index 00000000000..9a4f1d70ee8
Binary files /dev/null and b/docs/source/backends/nxp/terminal.png differ
diff --git a/examples/nxp/mcuxpresso/imxrt700/executorch_cifarnet/CMakeLists.txt b/examples/nxp/mcuxpresso/imxrt700/executorch_cifarnet/CMakeLists.txt
new file mode 100644
index 00000000000..0b0dd3f8849
--- /dev/null
+++ b/examples/nxp/mcuxpresso/imxrt700/executorch_cifarnet/CMakeLists.txt
@@ -0,0 +1,144 @@
+# Copyright 2026 NXP
+#
+# This source code is licensed under the BSD-style license found in the
+# LICENSE file in the root directory of this source tree.
+
+cmake_minimum_required(VERSION 3.24)
+
+set(CMAKE_EXECUTABLE_LIBRARY_PREFIX)
+set(CMAKE_EXECUTABLE_LIBRARY_SUFFIX)
+
+# CURRENT DIRECTORY
+set(ProjDirPath ${CMAKE_CURRENT_SOURCE_DIR})
+
+set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/${CMAKE_BUILD_TYPE})
+set(CMAKE_LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/${CMAKE_BUILD_TYPE})
+
+# Skip link step during compiler check (bare-metal cross-compilation).
+set(CMAKE_TRY_COMPILE_TARGET_TYPE STATIC_LIBRARY)
+
+project(executorch_cifarnet)
+
+enable_language(ASM)
+
+set(MCUX_SDK_PROJECT_NAME executorch_cifarnet.elf)
+
+set(EXECUTORCH_ROOT_DIR ${CMAKE_CURRENT_SOURCE_DIR}/../../../../..)
+
+# CPU and FPU flags required for Cortex-M33 with single-precision FPU.
+set(CPU_FLAGS "-mcpu=cortex-m33 -mthumb -mfloat-abi=hard -mfpu=fpv5-sp-d16")
+set(CPU_DEFINES
+    "-DCPU_MIMXRT798SGFOA_cm33_core0 -DCPU_MIMXRT798SGFOB_cm33_core0 \
+     -DMIMXRT798S_cm33_core0_SERIES -DMCUXPRESSO_SDK \
+     -D__STARTUP_INITIALIZE_NONCACHEDATA -D__STARTUP_CLEAR_BSS \
+     -DDSP_IMAGE_COPY_TO_RAM=1 -DBOOT_HEADER_ENABLE=1 \
+     -DEIQ_EXAMPLE_HSRUN_CLOCK -DMCUX_META_BUILD \
+     -DPRINTF_ADVANCED_ENABLE=1 -DPRINTF_FLOAT_ENABLE=1 -DNO_HEAP_USAGE=1 \
+     -DSDK_DEBUGCONSOLE=1 -DSDK_I2C_BASED_COMPONENT_USED=1"
+)
+set(CMAKE_C_FLAGS
+    "${CMAKE_C_FLAGS}   ${CPU_FLAGS} ${CPU_DEFINES} -fno-common -ffunction-sections -fdata-sections -fno-builtin -mapcs -std=gnu99"
+)
+set(CMAKE_CXX_FLAGS
+    "${CMAKE_CXX_FLAGS} ${CPU_FLAGS} ${CPU_DEFINES} -fno-common -ffunction-sections -fdata-sections -fno-builtin -mapcs -fno-rtti -fno-exceptions"
+)
+set(CMAKE_ASM_FLAGS "${CMAKE_ASM_FLAGS} ${CPU_FLAGS} ${CPU_DEFINES}")
+set(CMAKE_EXE_LINKER_FLAGS
+    "${CMAKE_EXE_LINKER_FLAGS} ${CPU_FLAGS} -fno-common -ffunction-sections -fdata-sections -fno-builtin -mapcs -Wl,--gc-sections -Wl,-static -specs=nano.specs -specs=nosys.specs -T\"${SdkRootDirPath}/examples/_boards/mimxrt700evk/eiq_examples/executorch_cifarnet/cm33_core0/gcc/MIMXRT798Sxxxx_cm33_core0_flash.ld\" -static"
+)
+
+add_executable(
+  ${MCUX_SDK_PROJECT_NAME}
+  ${SdkRootDirPath}/examples/_boards/mimxrt700evk/flash_config/flash_config.c
+  ${SdkRootDirPath}/examples/_boards/mimxrt700evk/eiq_examples/executorch_cifarnet/cm33_core0/hardware_init.c
+  ${SdkRootDirPath}/examples/_boards/mimxrt700evk/eiq_examples/executorch_cifarnet/cm33_core0/pin_mux.c
+  ${SdkRootDirPath}/examples/_boards/mimxrt700evk/board.c
+  ${SdkRootDirPath}/examples/_boards/mimxrt700evk/pmic_support.c
+  ${SdkRootDirPath}/examples/_boards/mimxrt700evk/common/clock/cm33_core0/clock_config.c
+  ${SdkRootDirPath}/examples/eiq_examples/executorch_cifarnet/main.cpp
+  ${SdkRootDirPath}/examples/eiq_examples/executorch_cifarnet/RegisterKernels.cpp
+  ${SdkRootDirPath}/examples/eiq_examples/common/timer.c
+  ${SdkRootDirPath}/devices/RT/RT700/MIMXRT798S/startup_MIMXRT798S_cm33_core0.c
+  ${EXECUTORCH_ROOT_DIR}/backends/nxp/runtime/NeutronBackend.cpp
+  ${SdkRootDirPath}/middleware/tfm/tf-m/platform/ext/common/syscalls_stub.c
+  # Device-level drivers (clock, power, reset, system init).
+  ${SdkRootDirPath}/devices/RT/RT700/MIMXRT798S/drivers/fsl_clock.c
+  ${SdkRootDirPath}/devices/RT/RT700/MIMXRT798S/drivers/fsl_power.c
+  ${SdkRootDirPath}/devices/RT/RT700/MIMXRT798S/drivers/fsl_reset.c
+  ${SdkRootDirPath}/devices/RT/RT700/MIMXRT798S/system_MIMXRT798S_cm33_core0.c
+  # Common ARM driver (provides SDK_DelayAtLeastUs).
+  ${SdkRootDirPath}/drivers/common/fsl_common_arm.c
+  # Peripheral drivers.
+  ${SdkRootDirPath}/drivers/cache/xcache/fsl_cache.c
+  ${SdkRootDirPath}/drivers/lpflexcomm/fsl_lpflexcomm.c
+  ${SdkRootDirPath}/drivers/lpflexcomm/lpi2c/fsl_lpi2c.c
+  ${SdkRootDirPath}/drivers/lpflexcomm/lpuart/fsl_lpuart.c
+  ${SdkRootDirPath}/drivers/gpio/fsl_gpio.c
+  ${SdkRootDirPath}/drivers/glikey/fsl_glikey.c
+  # UART HAL adapter (provides HAL_UartInit etc.).
+  ${SdkRootDirPath}/components/uart/fsl_adapter_lpuart.c
+  # PMIC driver.
+  ${SdkRootDirPath}/components/pmic/pca9422/fsl_pca9422.c
+  # Debug console (provides DbgConsole_Init/Printf).
+  ${SdkRootDirPath}/components/debug_console_lite/fsl_debug_console.c
+)
+
+target_include_directories(
+  ${MCUX_SDK_PROJECT_NAME}
+  PRIVATE
+    ${MODEL_DIR}
+    ${SdkRootDirPath}/arch/arm/CMSIS/Core/Include
+    ${SdkRootDirPath}/devices/RT/RT700/MIMXRT798S
+    ${SdkRootDirPath}/devices/RT/RT700/MIMXRT798S/cm33_core0
+    ${SdkRootDirPath}/devices/RT/RT700/MIMXRT798S/drivers
+    ${SdkRootDirPath}/devices/RT/RT700/periph
+    ${SdkRootDirPath}/drivers/common
+    ${SdkRootDirPath}/components/pmic/pca9422
+    ${SdkRootDirPath}/components/uart
+    ${SdkRootDirPath}/components/debug_console_lite
+    ${SdkRootDirPath}/examples/_boards/mimxrt700evk
+    ${SdkRootDirPath}/examples/_boards/mimxrt700evk/flash_config
+    ${SdkRootDirPath}/examples/_boards/mimxrt700evk/eiq_examples/executorch_cifarnet/cm33_core0
+    ${SdkRootDirPath}/examples/_boards/mimxrt700evk/common/clock/cm33_core0
+    ${SdkRootDirPath}/examples/eiq_examples/executorch_cifarnet
+    ${SdkRootDirPath}/examples/eiq_examples/common
+    ${SdkRootDirPath}/examples/_boards/mimxrt700evk/eiq_examples/executorch_cifarnet/npu
+    ${SdkRootDirPath}/drivers/cache/xcache
+    ${SdkRootDirPath}/drivers/gpio
+    ${SdkRootDirPath}/drivers/lpflexcomm
+    ${SdkRootDirPath}/drivers/lpflexcomm/lpuart
+    ${SdkRootDirPath}/drivers/lpflexcomm/lpi2c
+    ${SdkRootDirPath}/drivers/xspi
+    ${SdkRootDirPath}/drivers/reset
+    ${SdkRootDirPath}/drivers/clock
+    ${SdkRootDirPath}/drivers/glikey
+    ${SdkRootDirPath}/drivers/mu1
+    ${SdkRootDirPath}/drivers/power
+    ${SdkRootDirPath}/drivers/iopctl
+    ${SdkRootDirPath}/components/str
+)
+
+set(EXECUTORCH_BUILD_PYBIND OFF)
+set(EXECUTORCH_BUILD_TESTS OFF)
+set(EXECUTORCH_BUILD_DEVTOOLS OFF)
+set(EXECUTORCH_BUILD_EXECUTOR_RUNNER OFF)
+set(EXECUTORCH_BUILD_CPUINFO OFF)
+set(EXECUTORCH_BUILD_PTHREADPOOL OFF)
+set(EXECUTORCH_BUILD_EXTENSION_RUNNER_UTIL ON)
+set(EXECUTORCH_BUILD_PORTABLE_OPS ON)
+set(EXECUTORCH_BUILD_KERNELS_QUANTIZED ON)
+set(CMAKE_POSITION_INDEPENDENT_CODE OFF)
+add_subdirectory(${EXECUTORCH_ROOT_DIR} EXCLUDE_FROM_ALL executorch)
+
+target_link_libraries(
+  ${MCUX_SDK_PROJECT_NAME}
+  PRIVATE -Wl,--start-group
+          executorch
+          executorch_core
+          extension_runner_util
+          quantized_kernels
+          portable_kernels
+          ${NEUTRON_LIB_DIR}/libNeutronDriver.a
+          ${NEUTRON_LIB_DIR}/libNeutronFirmware.a
+          -Wl,--end-group
+)
diff --git a/examples/nxp/mcuxpresso/imxrt700/executorch_cifarnet/build_example.sh b/examples/nxp/mcuxpresso/imxrt700/executorch_cifarnet/build_example.sh
new file mode 100755
index 00000000000..f8a528ac7ee
--- /dev/null
+++ b/examples/nxp/mcuxpresso/imxrt700/executorch_cifarnet/build_example.sh
@@ -0,0 +1,48 @@
+#!/bin/bash
+# Copyright 2026 NXP
+#
+# This source code is licensed under the BSD-style license found in the
+# LICENSE file in the root directory of this source tree.
+
+if [ -z ${ARMGCC_DIR+x} ]; then
+    echo "ARMGCC_DIR needs to be set in the environment!"
+    exit 1;
+fi
+
+if [ -z ${SdkRootDirPath+x} ]; then
+    echo "SdkRootDirPath needs to be set in the environment!"
+    exit 1;
+fi
+
+if [ ! -f model_pte.h ]; then
+    echo "Cannot find model_pte.h!"
+    exit 1;    
+fi
+
+if [ -z ${NEUTRON_LIB_DIR+x} ]; then
+    echo "NEUTRON_LIB_DIR needs to be set in the environment!"
+    exit 1;
+fi
+
+if [ ! -f ${NEUTRON_LIB_DIR}/libNeutronDriver.a ]; then
+    echo "Neutron driver not found in ${NEUTRON_LIB_DIR}!"
+    exit 1;    
+fi
+
+if [ ! -f ${NEUTRON_LIB_DIR}/libNeutronFirmware.a ]; then
+    echo "Neutron firmware not found in ${NEUTRON_LIB_DIR}!"
+    exit 1;    
+fi
+
+rm -rf cmake-out && mkdir -p cmake-out
+
+cmake -DSdkRootDirPath=${SdkRootDirPath} \
+      -DCMAKE_TOOLCHAIN_FILE=${SdkRootDirPath}/cmake/toolchain/armgcc.cmake \
+      -DMODEL_DIR=$(pwd) \
+      -DNEUTRON_LIB_DIR=${NEUTRON_LIB_DIR} \
+      -DCMAKE_BUILD_TYPE=flash_release \
+      -G "Unix Makefiles" \
+      -B cmake-out \
+      "$(dirname "$0")"
+
+make -C cmake-out -j$(( $(nproc 2>/dev/null || sysctl -n hw.ncpu) + 1 )) executorch_cifarnet.elf
diff --git a/examples/nxp/mcuxpresso/imxrt700/executorch_cifarnet/prepare_model.sh b/examples/nxp/mcuxpresso/imxrt700/executorch_cifarnet/prepare_model.sh
new file mode 100755
index 00000000000..9a5c29022f5
--- /dev/null
+++ b/examples/nxp/mcuxpresso/imxrt700/executorch_cifarnet/prepare_model.sh
@@ -0,0 +1,32 @@
+#!/bin/bash
+# Copyright 2026 NXP
+#
+# This source code is licensed under the BSD-style license found in the
+# LICENSE file in the root directory of this source tree.
+
+set -ue
+
+pushd "$(dirname "$0")/../../../../.."
+
+./install_executorch.sh
+./devtools/install_requirements.sh
+
+pip install -r backends/nxp/requirements-eiq.txt
+
+python3 -m examples.nxp.aot_neutron_compile -m cifar10 -d -q --use_channels_last_dim_order --remove-quant-io-ops
+mv cifar10_nxp_delegate.pte model.pte
+
+popd
+
+cat > model_pte.h <<'EOF'
+#ifdef __MCUXPRESSO
+#define __PLACEMENT __attribute__((section(".data.$modeldata")))
+#else
+#define __PLACEMENT __attribute__((section(".modeldata")))
+#endif
+ 
+static const uint8_t model_pte[] __ALIGNED(16) __PLACEMENT = {
+EOF
+
+
+xxd -i "$(dirname "$0")/../../../../../model.pte" | grep -v unsigned >> model_pte.h
diff --git a/examples/nxp/mcuxpresso/imxrt700/executorch_cifarnet/test_build_from_scratch.sh b/examples/nxp/mcuxpresso/imxrt700/executorch_cifarnet/test_build_from_scratch.sh
new file mode 100755
index 00000000000..f734d1b79a1
--- /dev/null
+++ b/examples/nxp/mcuxpresso/imxrt700/executorch_cifarnet/test_build_from_scratch.sh
@@ -0,0 +1,58 @@
+#!/bin/bash
+# Copyright 2026 NXP
+#
+# This source code is licensed under the BSD-style license found in the
+# LICENSE file in the root directory of this source tree.
+
+set -ue
+ARM_TOOLCHAIN_URL="${ARM_TOOLCHAIN_URL:-https://developer.arm.com/-/media/Files/downloads/gnu/15.2.rel1/binrel/arm-gnu-toolchain-15.2.rel1-x86_64-arm-none-eabi.tar.xz}"
+
+# Get arm gcc
+echo Downloading ARM GCC toolchain
+if [ ! -d arm-toolchain ]; then
+    mkdir -p arm-toolchain
+    pushd arm-toolchain
+    wget $ARM_TOOLCHAIN_URL
+    tar -xvf *.tar.xz
+    rm *.tar.xz
+    popd
+fi
+export ARMGCC_DIR=$(pwd)/$(find arm-toolchain -maxdepth 1 -type d | tail -1)
+
+# Prepare model
+# Side effect: the neutron SDK is installed
+echo Preparing model and installing neutron SDK
+$(dirname $0)/prepare_model.sh
+# Check the model exists
+if [ ! -f model_pte.h ]; then
+    echo "Cannot create the model_pte.h!"
+    exit 1;
+fi
+
+# Locate Neutron SDK
+NEUTRON_LIB_DIR=$(python3 -c "import eiq_neutron_sdk; print(eiq_neutron_sdk.__path__[0])")
+export NEUTRON_LIB_DIR=${NEUTRON_LIB_DIR}/target/imxrt700/rt700/cm33
+
+# Get MCUX SDK
+echo Downloading MCUXpresso SDK
+if [ ! -d mcuxpresso-sdk ]; then
+    pip install west
+    west init -m https://github.com/nxp-mcuxpresso/mcuxsdk-manifests.git mcuxpresso-sdk
+    pushd mcuxpresso-sdk
+    west update_board --set board mimxrt700evk
+    popd
+fi
+export SdkRootDirPath=$(pwd)/mcuxpresso-sdk/mcuxsdk
+
+# Build now
+echo Building the example
+$(dirname $0)/build_example.sh
+
+# Test the result
+if [ ! -f cmake-out/flash_release/executorch_cifarnet.elf ]; then
+    echo "Build not successful!"
+    exit 1;
+else
+    echo "Build successful."
+    exit 0;
+fi