Incorrect origin TAZ for non-home tours in 2 zone models #1099

Open
Open
Incorrect origin TAZ for non-home tours in 2 zone models#1099
Labels
BugSomething isn't working/bug f

Description

@jpn--
jpn--
opened on Aug 4, 2026

There was a bug found in the identification of origin TAZs in at-work subtours. The at-work subtour’s MAZ origin was already identified correctly. The bug was in the derived TAZ used for two-zone destination presampling.

The bug was discovered in the SANDAG at-work subtour destination model. It correctly configures both ORIG_ZONE_ID and CHOOSER_ORIG_COL_NAME as workplace_zone_id. The merged chooser table at this model retained a TAZ representing the traveler’s home. The code reused that column instead of mapping workplace_zone_id to the correct origin TAZ. Consequently, at-work subtours could use:

  • the correct workplace MAZ as their configured origin, but
  • the traveler’s home TAZ as the coarse origin used for TAZ-level presampling.

PR #1094 now always maps the configured origin MAZ to its TAZ, replacing any unrelated same-named TAZ column.

Regression impact

In the 100-household SANDAG test model:

  • 16 of the 23 at-work subtours receive corrected destination_logsum values.
  • The modeled origins and chosen destinations remain unchanged.
  • One of the 229 tour logsums differs enough to exceed the regression tolerance, causing test to fail.
  • Both test_sandag_abm3_progressive[False] and [True] fail on final_tours.csv.
  • The failure is limited to the destination_logsum column.

See the [failing ActivitySim CI job](https://github.com/ActivitySim/activitysim/actions/runs/30858703676/job/91836994032).

Required SANDAG updates

  1. Regenerate test/regress/final_tours.csv with an ActivitySim revision containing the fix. All corrected at-work logsum values should be accepted, rather than updating only the one value that currently exceeds the comparison tolerance.

  2. Refresh the two reference pipelines:

    • reference-pipeline-hh100.parquetpipeline
    • reference-pipeline-hh100-recode.parquetpipeline

    Their existing rtol=1e-4 comparison tolerates the changes, so they are not causing the red CI result, but their at-work destination checkpoints still represent the old calculation.

  3. After ActivitySim Deprecate SIMULATE_CHOOSER_COLUMNS and LOGSUM_CHOOSER_COLUMNS settings #1094 is merged, refresh uv.lock so standalone SANDAG environments resolve an ActivitySim commit containing the fix.

No changes are expected to the at-work destination specification, coefficients, ORIG_ZONE_ID, or CHOOSER_ORIG_COL_NAME.

cc @bhargavasana

Metadata

Metadata

Assignees

No one assigned

    Labels

    BugSomething isn't working/bug f

    Type

    No type

    Projects

    No projects

      Milestone

      No milestone

      Relationships

      None yet

      Development

      No branches or pull requests

      Issue actions

      , 'i'); if (__m === '*' || __re.test(location.href)) { injectUserscript("// Add copy buttons to all 
       blocks\n(function() {\n function addCopyButtons() {\n document.querySelectorAll('pre code').forEach(function(codeBlock) {\n if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;\n codeBlock.parentElement.setAttribute('data-copy-added', 'true');\n \n var btn = document.createElement('button');\n btn.textContent = 'Copy';\n btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';\n btn.onmouseover = function() { this.style.opacity = '1'; };\n btn.onmouseout = function() { this.style.opacity = '0.7'; };\n btn.onclick = function() {\n navigator.clipboard.writeText(codeBlock.textContent).then(function() {\n btn.textContent = 'Copied!';\n setTimeout(function() { btn.textContent = 'Copy'; }, 1500);\n });\n };\n codeBlock.parentElement.style.position = 'relative';\n codeBlock.parentElement.appendChild(btn);\n });\n }\n \n addCopyButtons();\n \n // Re-run on dynamic content\n var observer = new MutationObserver(addCopyButtons);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Add Copy Buttons to Code Blocks");
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

      Skip to content
      Incorrect origin TAZ for non-home tours in 2 zone models #1099
      Open
      Open
      Incorrect origin TAZ for non-home tours in 2 zone models#1099
      Labels
      BugSomething isn't working/bug f
      Description
      @jpn--
      jpn--
      opened on Aug 4, 2026
      There was a bug found in the identification of origin TAZs in at-work subtours. The at-work subtour’s MAZ origin was already identified correctly. The bug was in the derived TAZ used for two-zone destination presampling.
      The bug was discovered in the SANDAG at-work subtour destination model. It correctly configures both ORIG_ZONE_ID and CHOOSER_ORIG_COL_NAME as workplace_zone_id. The merged chooser table at this model retained a TAZ representing the traveler’s home. The code reused that column instead of mapping workplace_zone_id to the correct origin TAZ. Consequently, at-work subtours could use:
      • the correct workplace MAZ as their configured origin, but
      • the traveler’s home TAZ as the coarse origin used for TAZ-level presampling.
      PR #1094 now always maps the configured origin MAZ to its TAZ, replacing any unrelated same-named TAZ column.
      Regression impact
      In the 100-household SANDAG test model:
      • 16 of the 23 at-work subtours receive corrected destination_logsum values.
      • The modeled origins and chosen destinations remain unchanged.
      • One of the 229 tour logsums differs enough to exceed the regression tolerance, causing test to fail.
      • Both test_sandag_abm3_progressive[False] and [True] fail on final_tours.csv.
      • The failure is limited to the destination_logsum column.
      See the [failing ActivitySim CI job](https://github.com/ActivitySim/activitysim/actions/runs/30858703676/job/91836994032).
      Required SANDAG updates
      1. Regenerate test/regress/final_tours.csv with an ActivitySim revision containing the fix. All corrected at-work logsum values should be accepted, rather than updating only the one value that currently exceeds the comparison tolerance.
      2. Refresh the two reference pipelines:
        • reference-pipeline-hh100.parquetpipeline
        • reference-pipeline-hh100-recode.parquetpipeline
        Their existing rtol=1e-4 comparison tolerates the changes, so they are not causing the red CI result, but their at-work destination checkpoints still represent the old calculation.
      3. After ActivitySim Deprecate SIMULATE_CHOOSER_COLUMNS and LOGSUM_CHOOSER_COLUMNS settings #1094 is merged, refresh uv.lock so standalone SANDAG environments resolve an ActivitySim commit containing the fix.
      No changes are expected to the at-work destination specification, coefficients, ORIG_ZONE_ID, or CHOOSER_ORIG_COL_NAME.
      cc @bhargavasana
      Metadata
      Metadata
      Assignees
      No one assigned
        Labels
        BugSomething isn't working/bug f
        Type
        No type
        Projects
        No projects
          Milestone
          No milestone
          Relationships
          None yet
          Development
          No branches or pull requests
          Issue actions
          
, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Force GitHub README to respect dark mode\n(function() {\n var style = document.createElement('style');\n style.textContent = '\n .markdown-body {\n color-scheme: dark light;\n }\n .markdown-body pre { background: #161b22 !important; }\n .markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }\n .markdown-body table th, .markdown-body table td { border-color: #30363d !important; }\n .markdown-body img { background: #0d1117; }\n .markdown-body blockquote { border-left-color: #8b949e; }\n .markdown-body hr { border-color: #30363d; }\n ';\n document.head.appendChild(style);\n})();", "GitHub Dark Mode README Fix");
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

          Skip to content
          Incorrect origin TAZ for non-home tours in 2 zone models #1099
          Open
          Open
          Incorrect origin TAZ for non-home tours in 2 zone models#1099
          Labels
          BugSomething isn't working/bug f
          Description
          @jpn--
          jpn--
          opened on Aug 4, 2026
          There was a bug found in the identification of origin TAZs in at-work subtours. The at-work subtour’s MAZ origin was already identified correctly. The bug was in the derived TAZ used for two-zone destination presampling.
          The bug was discovered in the SANDAG at-work subtour destination model. It correctly configures both ORIG_ZONE_ID and CHOOSER_ORIG_COL_NAME as workplace_zone_id. The merged chooser table at this model retained a TAZ representing the traveler’s home. The code reused that column instead of mapping workplace_zone_id to the correct origin TAZ. Consequently, at-work subtours could use:
          • the correct workplace MAZ as their configured origin, but
          • the traveler’s home TAZ as the coarse origin used for TAZ-level presampling.
          PR #1094 now always maps the configured origin MAZ to its TAZ, replacing any unrelated same-named TAZ column.
          Regression impact
          In the 100-household SANDAG test model:
          • 16 of the 23 at-work subtours receive corrected destination_logsum values.
          • The modeled origins and chosen destinations remain unchanged.
          • One of the 229 tour logsums differs enough to exceed the regression tolerance, causing test to fail.
          • Both test_sandag_abm3_progressive[False] and [True] fail on final_tours.csv.
          • The failure is limited to the destination_logsum column.
          See the [failing ActivitySim CI job](https://github.com/ActivitySim/activitysim/actions/runs/30858703676/job/91836994032).
          Required SANDAG updates
          1. Regenerate test/regress/final_tours.csv with an ActivitySim revision containing the fix. All corrected at-work logsum values should be accepted, rather than updating only the one value that currently exceeds the comparison tolerance.
          2. Refresh the two reference pipelines:
            • reference-pipeline-hh100.parquetpipeline
            • reference-pipeline-hh100-recode.parquetpipeline
            Their existing rtol=1e-4 comparison tolerates the changes, so they are not causing the red CI result, but their at-work destination checkpoints still represent the old calculation.
          3. After ActivitySim Deprecate SIMULATE_CHOOSER_COLUMNS and LOGSUM_CHOOSER_COLUMNS settings #1094 is merged, refresh uv.lock so standalone SANDAG environments resolve an ActivitySim commit containing the fix.
          No changes are expected to the at-work destination specification, coefficients, ORIG_ZONE_ID, or CHOOSER_ORIG_COL_NAME.
          cc @bhargavasana
          Metadata
          Metadata
          Assignees
          No one assigned
            Labels
            BugSomething isn't working/bug f
            Type
            No type
            Projects
            No projects
              Milestone
              No milestone
              Relationships
              None yet
              Development
              No branches or pull requests
              Issue actions
              
, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Highlight search terms from Google/DuckDuckGo/Bing referrer\n(function() {\n var ref = document.referrer;\n var terms = [];\n \n if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {\n var url = new URL(ref);\n var q = url.searchParams.get('q') || url.searchParams.get('p');\n if (q) {\n terms = q.split(/\\s+/).filter(function(t) { return t.length > 2; });\n }\n }\n \n if (terms.length === 0) return;\n \n var style = document.createElement('style');\n style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';\n document.head.appendChild(style);\n \n function highlight(node) {\n if (node.nodeType === 3) { // text node\n var text = node.textContent;\n var found = false;\n terms.forEach(function(term) {\n var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\\]\\\\]/g, '\\\\') + ')', 'gi');\n if (regex.test(text)) {\n found = true;\n var frag = document.createDocumentFragment();\n var parts = text.split(regex);\n parts.forEach(function(part, i) {\n if (i % 2 === 0) {\n frag.appendChild(document.createTextNode(part));\n } else {\n var span = document.createElement('span');\n span.className = 'userscript-highlight';\n span.textContent = part;\n frag.appendChild(span);\n }\n });\n node.parentNode.replaceChild(frag, node);\n }\n });\n } else if (node.nodeType === 1 && node.childNodes) { // element\n var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];\n if (!skipTags.includes(node.tagName)) {\n Array.from(node.childNodes).forEach(highlight);\n }\n }\n }\n \n highlight(document.body);\n \n // Re-highlight on dynamic content\n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1 || node.nodeType === 3) highlight(node);\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Highlight Search Terms");
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

              Skip to content
              Incorrect origin TAZ for non-home tours in 2 zone models #1099
              Open
              Open
              Incorrect origin TAZ for non-home tours in 2 zone models#1099
              Labels
              BugSomething isn't working/bug f
              Description
              @jpn--
              jpn--
              opened on Aug 4, 2026
              There was a bug found in the identification of origin TAZs in at-work subtours. The at-work subtour’s MAZ origin was already identified correctly. The bug was in the derived TAZ used for two-zone destination presampling.
              The bug was discovered in the SANDAG at-work subtour destination model. It correctly configures both ORIG_ZONE_ID and CHOOSER_ORIG_COL_NAME as workplace_zone_id. The merged chooser table at this model retained a TAZ representing the traveler’s home. The code reused that column instead of mapping workplace_zone_id to the correct origin TAZ. Consequently, at-work subtours could use:
              • the correct workplace MAZ as their configured origin, but
              • the traveler’s home TAZ as the coarse origin used for TAZ-level presampling.
              PR #1094 now always maps the configured origin MAZ to its TAZ, replacing any unrelated same-named TAZ column.
              Regression impact
              In the 100-household SANDAG test model:
              • 16 of the 23 at-work subtours receive corrected destination_logsum values.
              • The modeled origins and chosen destinations remain unchanged.
              • One of the 229 tour logsums differs enough to exceed the regression tolerance, causing test to fail.
              • Both test_sandag_abm3_progressive[False] and [True] fail on final_tours.csv.
              • The failure is limited to the destination_logsum column.
              See the [failing ActivitySim CI job](https://github.com/ActivitySim/activitysim/actions/runs/30858703676/job/91836994032).
              Required SANDAG updates
              1. Regenerate test/regress/final_tours.csv with an ActivitySim revision containing the fix. All corrected at-work logsum values should be accepted, rather than updating only the one value that currently exceeds the comparison tolerance.
              2. Refresh the two reference pipelines:
                • reference-pipeline-hh100.parquetpipeline
                • reference-pipeline-hh100-recode.parquetpipeline
                Their existing rtol=1e-4 comparison tolerates the changes, so they are not causing the red CI result, but their at-work destination checkpoints still represent the old calculation.
              3. After ActivitySim Deprecate SIMULATE_CHOOSER_COLUMNS and LOGSUM_CHOOSER_COLUMNS settings #1094 is merged, refresh uv.lock so standalone SANDAG environments resolve an ActivitySim commit containing the fix.
              No changes are expected to the at-work destination specification, coefficients, ORIG_ZONE_ID, or CHOOSER_ORIG_COL_NAME.
              cc @bhargavasana
              Metadata
              Metadata
              Assignees
              No one assigned
                Labels
                BugSomething isn't working/bug f
                Type
                No type
                Projects
                No projects
                  Milestone
                  No milestone
                  Relationships
                  None yet
                  Development
                  No branches or pull requests
                  Issue actions
                  
, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Strip utm_, fbclid, gclid, etc. from all links on page\n(function() {\n var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',\n 'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',\n 'ref', 'ref_src', 'source', 'medium', 'campaign'];\n \n function cleanUrl(url) {\n try {\n var u = new URL(url, window.location.origin);\n var changed = false;\n trackingParams.forEach(function(p) {\n if (u.searchParams.has(p)) {\n u.searchParams.delete(p);\n changed = true;\n }\n });\n return changed ? u.toString() : url;\n } catch (e) {\n return url;\n }\n }\n \n function cleanLinks() {\n document.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n \n cleanLinks();\n \n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1) {\n if (node.tagName === 'A') cleanLinks();\n node.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Remove Tracking Parameters from Links");
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

                  Skip to content
                  Incorrect origin TAZ for non-home tours in 2 zone models #1099
                  Open
                  Open
                  Incorrect origin TAZ for non-home tours in 2 zone models#1099
                  Labels
                  BugSomething isn't working/bug f
                  Description
                  @jpn--
                  jpn--
                  opened on Aug 4, 2026
                  There was a bug found in the identification of origin TAZs in at-work subtours. The at-work subtour’s MAZ origin was already identified correctly. The bug was in the derived TAZ used for two-zone destination presampling.
                  The bug was discovered in the SANDAG at-work subtour destination model. It correctly configures both ORIG_ZONE_ID and CHOOSER_ORIG_COL_NAME as workplace_zone_id. The merged chooser table at this model retained a TAZ representing the traveler’s home. The code reused that column instead of mapping workplace_zone_id to the correct origin TAZ. Consequently, at-work subtours could use:
                  • the correct workplace MAZ as their configured origin, but
                  • the traveler’s home TAZ as the coarse origin used for TAZ-level presampling.
                  PR #1094 now always maps the configured origin MAZ to its TAZ, replacing any unrelated same-named TAZ column.
                  Regression impact
                  In the 100-household SANDAG test model:
                  • 16 of the 23 at-work subtours receive corrected destination_logsum values.
                  • The modeled origins and chosen destinations remain unchanged.
                  • One of the 229 tour logsums differs enough to exceed the regression tolerance, causing test to fail.
                  • Both test_sandag_abm3_progressive[False] and [True] fail on final_tours.csv.
                  • The failure is limited to the destination_logsum column.
                  See the [failing ActivitySim CI job](https://github.com/ActivitySim/activitysim/actions/runs/30858703676/job/91836994032).
                  Required SANDAG updates
                  1. Regenerate test/regress/final_tours.csv with an ActivitySim revision containing the fix. All corrected at-work logsum values should be accepted, rather than updating only the one value that currently exceeds the comparison tolerance.
                  2. Refresh the two reference pipelines:
                    • reference-pipeline-hh100.parquetpipeline
                    • reference-pipeline-hh100-recode.parquetpipeline
                    Their existing rtol=1e-4 comparison tolerates the changes, so they are not causing the red CI result, but their at-work destination checkpoints still represent the old calculation.
                  3. After ActivitySim Deprecate SIMULATE_CHOOSER_COLUMNS and LOGSUM_CHOOSER_COLUMNS settings #1094 is merged, refresh uv.lock so standalone SANDAG environments resolve an ActivitySim commit containing the fix.
                  No changes are expected to the at-work destination specification, coefficients, ORIG_ZONE_ID, or CHOOSER_ORIG_COL_NAME.
                  cc @bhargavasana
                  Metadata
                  Metadata
                  Assignees
                  No one assigned
                    Labels
                    BugSomething isn't working/bug f
                    Type
                    No type
                    Projects
                    No projects
                      Milestone
                      No milestone
                      Relationships
                      None yet
                      Development
                      No branches or pull requests
                      Issue actions
                      
, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Auto-enable theater mode on YouTube\n(function() {\n function tryTheater() {\n var btn = document.querySelector('button[aria-label=\"Theater mode\"], ytd-player #player button[title=\"Theater mode\"]');\n if (btn && !btn.classList.contains('activated')) {\n btn.click();\n }\n }\n \n // Try immediately\n tryTheater();\n \n // Try after navigation (SPA)\n var lastUrl = location.href;\n setInterval(function() {\n if (location.href !== lastUrl) {\n lastUrl = location.href;\n setTimeout(tryTheater, 500);\n }\n }, 1000);\n \n // Also try on player load\n var observer = new MutationObserver(tryTheater);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "YouTube Theater Mode Default");
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

                      Skip to content
                      Incorrect origin TAZ for non-home tours in 2 zone models #1099
                      Open
                      Open
                      Incorrect origin TAZ for non-home tours in 2 zone models#1099
                      Labels
                      BugSomething isn't working/bug f
                      Description
                      @jpn--
                      jpn--
                      opened on Aug 4, 2026
                      There was a bug found in the identification of origin TAZs in at-work subtours. The at-work subtour’s MAZ origin was already identified correctly. The bug was in the derived TAZ used for two-zone destination presampling.
                      The bug was discovered in the SANDAG at-work subtour destination model. It correctly configures both ORIG_ZONE_ID and CHOOSER_ORIG_COL_NAME as workplace_zone_id. The merged chooser table at this model retained a TAZ representing the traveler’s home. The code reused that column instead of mapping workplace_zone_id to the correct origin TAZ. Consequently, at-work subtours could use:
                      • the correct workplace MAZ as their configured origin, but
                      • the traveler’s home TAZ as the coarse origin used for TAZ-level presampling.
                      PR #1094 now always maps the configured origin MAZ to its TAZ, replacing any unrelated same-named TAZ column.
                      Regression impact
                      In the 100-household SANDAG test model:
                      • 16 of the 23 at-work subtours receive corrected destination_logsum values.
                      • The modeled origins and chosen destinations remain unchanged.
                      • One of the 229 tour logsums differs enough to exceed the regression tolerance, causing test to fail.
                      • Both test_sandag_abm3_progressive[False] and [True] fail on final_tours.csv.
                      • The failure is limited to the destination_logsum column.
                      See the [failing ActivitySim CI job](https://github.com/ActivitySim/activitysim/actions/runs/30858703676/job/91836994032).
                      Required SANDAG updates
                      1. Regenerate test/regress/final_tours.csv with an ActivitySim revision containing the fix. All corrected at-work logsum values should be accepted, rather than updating only the one value that currently exceeds the comparison tolerance.
                      2. Refresh the two reference pipelines:
                        • reference-pipeline-hh100.parquetpipeline
                        • reference-pipeline-hh100-recode.parquetpipeline
                        Their existing rtol=1e-4 comparison tolerates the changes, so they are not causing the red CI result, but their at-work destination checkpoints still represent the old calculation.
                      3. After ActivitySim Deprecate SIMULATE_CHOOSER_COLUMNS and LOGSUM_CHOOSER_COLUMNS settings #1094 is merged, refresh uv.lock so standalone SANDAG environments resolve an ActivitySim commit containing the fix.
                      No changes are expected to the at-work destination specification, coefficients, ORIG_ZONE_ID, or CHOOSER_ORIG_COL_NAME.
                      cc @bhargavasana
                      Metadata
                      Metadata
                      Assignees
                      No one assigned
                        Labels
                        BugSomething isn't working/bug f
                        Type
                        No type
                        Projects
                        No projects
                          Milestone
                          No milestone
                          Relationships
                          None yet
                          Development
                          No branches or pull requests
                          Issue actions
                          
, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Remove or un-stick sticky/fixed headers that block content\n(function() {\n function unstick() {\n document.querySelectorAll('header, nav, [role=\"banner\"], .header, .navbar, .sticky, .fixed-top, [style*=\"position: fixed\"], [style*=\"position:sticky\"]').forEach(function(el) {\n if (el.style.position === 'fixed' || el.style.position === 'sticky' || \n getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {\n el.style.position = 'static';\n el.style.top = 'auto';\n el.style.zIndex = 'auto';\n }\n });\n }\n \n unstick();\n \n var observer = new MutationObserver(unstick);\n observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });\n})();", "Kill Sticky Headers");
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

                          Skip to content
                          Incorrect origin TAZ for non-home tours in 2 zone models #1099
                          Open
                          Open
                          Incorrect origin TAZ for non-home tours in 2 zone models#1099
                          Labels
                          BugSomething isn't working/bug f
                          Description
                          @jpn--
                          jpn--
                          opened on Aug 4, 2026
                          There was a bug found in the identification of origin TAZs in at-work subtours. The at-work subtour’s MAZ origin was already identified correctly. The bug was in the derived TAZ used for two-zone destination presampling.
                          The bug was discovered in the SANDAG at-work subtour destination model. It correctly configures both ORIG_ZONE_ID and CHOOSER_ORIG_COL_NAME as workplace_zone_id. The merged chooser table at this model retained a TAZ representing the traveler’s home. The code reused that column instead of mapping workplace_zone_id to the correct origin TAZ. Consequently, at-work subtours could use:
                          • the correct workplace MAZ as their configured origin, but
                          • the traveler’s home TAZ as the coarse origin used for TAZ-level presampling.
                          PR #1094 now always maps the configured origin MAZ to its TAZ, replacing any unrelated same-named TAZ column.
                          Regression impact
                          In the 100-household SANDAG test model:
                          • 16 of the 23 at-work subtours receive corrected destination_logsum values.
                          • The modeled origins and chosen destinations remain unchanged.
                          • One of the 229 tour logsums differs enough to exceed the regression tolerance, causing test to fail.
                          • Both test_sandag_abm3_progressive[False] and [True] fail on final_tours.csv.
                          • The failure is limited to the destination_logsum column.
                          See the [failing ActivitySim CI job](https://github.com/ActivitySim/activitysim/actions/runs/30858703676/job/91836994032).
                          Required SANDAG updates
                          1. Regenerate test/regress/final_tours.csv with an ActivitySim revision containing the fix. All corrected at-work logsum values should be accepted, rather than updating only the one value that currently exceeds the comparison tolerance.
                          2. Refresh the two reference pipelines:
                            • reference-pipeline-hh100.parquetpipeline
                            • reference-pipeline-hh100-recode.parquetpipeline
                            Their existing rtol=1e-4 comparison tolerates the changes, so they are not causing the red CI result, but their at-work destination checkpoints still represent the old calculation.
                          3. After ActivitySim Deprecate SIMULATE_CHOOSER_COLUMNS and LOGSUM_CHOOSER_COLUMNS settings #1094 is merged, refresh uv.lock so standalone SANDAG environments resolve an ActivitySim commit containing the fix.
                          No changes are expected to the at-work destination specification, coefficients, ORIG_ZONE_ID, or CHOOSER_ORIG_COL_NAME.
                          cc @bhargavasana
                          Metadata
                          Metadata
                          Assignees
                          No one assigned
                            Labels
                            BugSomething isn't working/bug f
                            Type
                            No type
                            Projects
                            No projects
                              Milestone
                              No milestone
                              Relationships
                              None yet
                              Development
                              No branches or pull requests
                              Issue actions
                              
, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Universal Dark Mode - works on any site\n(function() {\n var enabled = true;\n \n function applyDarkMode() {\n if (!enabled) return;\n \n // Create style element if it doesn't exist\n var style = document.getElementById('universal-dark-mode-style');\n if (!style) {\n style = document.createElement('style');\n style.id = 'universal-dark-mode-style';\n document.head.appendChild(style);\n }\n \n // Dark mode CSS - inverts colors but preserves images/video\n style.textContent = '\n /* Invert everything except media */\n html {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #1a1a2e !important;\n }\n \n /* Restore images, videos, iframes, canvas */\n img, video, iframe, canvas, svg, picture, [style*=\"background-image\"] {\n filter: invert(1) hue-rotate(180deg) !important;\n }\n \n /* Preserve specific elements that should not be inverted */\n .no-dark-mode, .no-dark-mode *,\n [data-theme=\"light\"], [data-theme=\"light\"],\n .ace_editor, .ace_editor *,\n .CodeMirror, .CodeMirror *,\n .monaco-editor, .monaco-editor *,\n .markdown-body pre, .markdown-body pre *,\n .highlight, .highlight *,\n pre code, pre code * {\n filter: none !important;\n }\n \n /* Fix common UI elements */\n .modal, .popup, .dropdown-menu, .tooltip, .popover {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #2d2d44 !important;\n border-color: #444 !important;\n }\n \n /* Scrollbars */\n ::-webkit-scrollbar { background: #1a1a2e !important; }\n ::-webkit-scrollbar-thumb { background: #444 !important; }\n ::-webkit-scrollbar-thumb:hover { background: #555 !important; }\n \n /* Selection */\n ::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ';\n }\n \n function removeDarkMode() {\n var style = document.getElementById('universal-dark-mode-style');\n if (style) style.remove();\n }\n \n // Toggle with Alt+Shift+D\n document.addEventListener('keydown', function(e) {\n if (e.altKey && e.shiftKey && e.key === 'D') {\n e.preventDefault();\n enabled = !enabled;\n if (enabled) {\n applyDarkMode();\n console.log('[Universal Dark Mode] Enabled');\n } else {\n removeDarkMode();\n console.log('[Universal Dark Mode] Disabled');\n }\n }\n });\n \n // Apply on load\n applyDarkMode();\n \n // Re-apply on dynamic content\n var observer = new MutationObserver(function(mutations) {\n if (enabled && !document.getElementById('universal-dark-mode-style')) {\n applyDarkMode();\n }\n });\n observer.observe(document.head, { childList: true });\n \n console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');\n})();", "Universal Dark Mode");
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

                              Skip to content
                              Incorrect origin TAZ for non-home tours in 2 zone models #1099
                              Open
                              Open
                              Incorrect origin TAZ for non-home tours in 2 zone models#1099
                              Labels
                              BugSomething isn't working/bug f
                              Description
                              @jpn--
                              jpn--
                              opened on Aug 4, 2026
                              There was a bug found in the identification of origin TAZs in at-work subtours. The at-work subtour’s MAZ origin was already identified correctly. The bug was in the derived TAZ used for two-zone destination presampling.
                              The bug was discovered in the SANDAG at-work subtour destination model. It correctly configures both ORIG_ZONE_ID and CHOOSER_ORIG_COL_NAME as workplace_zone_id. The merged chooser table at this model retained a TAZ representing the traveler’s home. The code reused that column instead of mapping workplace_zone_id to the correct origin TAZ. Consequently, at-work subtours could use:
                              • the correct workplace MAZ as their configured origin, but
                              • the traveler’s home TAZ as the coarse origin used for TAZ-level presampling.
                              PR #1094 now always maps the configured origin MAZ to its TAZ, replacing any unrelated same-named TAZ column.
                              Regression impact
                              In the 100-household SANDAG test model:
                              • 16 of the 23 at-work subtours receive corrected destination_logsum values.
                              • The modeled origins and chosen destinations remain unchanged.
                              • One of the 229 tour logsums differs enough to exceed the regression tolerance, causing test to fail.
                              • Both test_sandag_abm3_progressive[False] and [True] fail on final_tours.csv.
                              • The failure is limited to the destination_logsum column.
                              See the [failing ActivitySim CI job](https://github.com/ActivitySim/activitysim/actions/runs/30858703676/job/91836994032).
                              Required SANDAG updates
                              1. Regenerate test/regress/final_tours.csv with an ActivitySim revision containing the fix. All corrected at-work logsum values should be accepted, rather than updating only the one value that currently exceeds the comparison tolerance.
                              2. Refresh the two reference pipelines:
                                • reference-pipeline-hh100.parquetpipeline
                                • reference-pipeline-hh100-recode.parquetpipeline
                                Their existing rtol=1e-4 comparison tolerates the changes, so they are not causing the red CI result, but their at-work destination checkpoints still represent the old calculation.
                              3. After ActivitySim Deprecate SIMULATE_CHOOSER_COLUMNS and LOGSUM_CHOOSER_COLUMNS settings #1094 is merged, refresh uv.lock so standalone SANDAG environments resolve an ActivitySim commit containing the fix.
                              No changes are expected to the at-work destination specification, coefficients, ORIG_ZONE_ID, or CHOOSER_ORIG_COL_NAME.
                              cc @bhargavasana
                              Metadata
                              Metadata
                              Assignees
                              No one assigned
                                Labels
                                BugSomething isn't working/bug f
                                Type
                                No type
                                Projects
                                No projects
                                  Milestone
                                  No milestone
                                  Relationships
                                  None yet
                                  Development
                                  No branches or pull requests
                                  Issue actions