WebRTC Camera

Home Assistant custom component for real-time viewing of almost any camera stream using WebRTC and other technologies.

Starting with version 3 the streaming server has been changed from RTSPtoWebRTC to go2rtc.

go2rtc
Installation
Configuration
Custom card
Templates
Two-way audio
Snapshots to Telegram
Cast or share stream
Stream to camera
FAQ
Debug
Known work cameras

go2rtc

This component uses the go2rtc application as a streaming server:

lowest possible streaming latency for many supported protocols
streaming from RTSP, RTMP, HTTP (FLV/MJPEG/JPEG), HomeKit cameras, USB cameras and other sources
streaming to RTSP, WebRTC, MSE/MP4 or MJPEG
support popular codec H264/H265, AAC, PCMU/PCMA, OPUS
on-the-fly transcoding for unsupported codecs via FFmpeg
autoselect streaming technology based on stream codecs, browser capabilities, network configuration

Read more in the go2rtc docs!

You can install go2rtc in several ways:

Basic users - this component will automatically download and run the latest version of go2rtc, you don't need to do anything yourself.
Advanced users - install the go2rtc or Frigate 12+ add-on.
Hakers - install go2rtc as binary or Docker on any server in LAN.

You can change the go2rtc settings by adding the go2rtc.yaml file to your Hass configuration folder.

Important. go2rtc runs its own web interface on port 1984 without a password. There you can see a list of active camera streams. Anyone on your LAN can access them without a password. You can disable this in the go2rtc config.

PS. There is also another nice card with go2rtc support - Frigate Lovelace Card.

Installation

Method 1.HACS > Integrations > Plus > WebRTC > Install

Method 2. Manually copy webrtc folder from latest release to /config/custom_components folder.

Additional steps if you are using the UI in YAML mode: add card to resources

The custom_card will be automatically registered with the Home Assistant UI, except when you are managing the UI in YAML mode. If you are managing the UI in YAML mode then add this to your UI resources for the custom:webrtc-camera card to work:

url: /webrtc/webrtc-camera.jstype: module

Refresh your browser

Configuration

Settings > Devices & Services > Add Integration > WebRTC

If the integration is not in the list, you need to clear the browser cache.

Component doesn't create devices and entities. It creates only two services and lovelace custom card.

Custom card

As a url you can use:

any protocol supported by go2rtc (rtsp, rtmp, http, onvif, dvrip, homekit, roborock, etc.)
stream name from the go2rtc config
Jinja2 template (should render supported protocol or stream name)

As a entity you can use almost any camera from Hass.

As a poster you can use:

http-link (should be publicly available link)
camera entity from Hass
stream name from the go2rtc config
Jinja2 template (should render camera entity or stream name)

Minimal

type: 'custom:webrtc-camera'url: 'rtsp://rtsp:12345678@192.168.1.123:554/av_stream/ch0'

or

type: 'custom:webrtc-camera'url: 'camera1'# stream name from go2rtc.yaml

or

type: 'custom:webrtc-camera'entity: camera.generic_stream # change to your camera entity_id

or

type: 'custom:webrtc-camera'streams:
- url: go2rtc_stream_hdname: HD # name is optionalmode: webrtc # mode is optionalmedia: video # media is optional
- url: go2rtc_stream_sdname: SDmode: msemedia: audio

PS. You can change the active stream by clicking on the mode label. Or by clicking on the stream name with enabled ui: true.

Full

All settings are optional! Only required setting - url or entity or streams.

type: 'custom:webrtc-camera'url: 'rtsp://rtsp:12345678@192.168.1.123:554/av_stream/ch0'entity: camera.generic_streammode: webrtc,webrtc/tcp,mse,hls,mjpeg # stream technology, default all of themmedia: video,audio # select only video or audio track, default bothserver: http://192.168.1.123:1984/ # custom go2rtc server address, default emptyui: true # custom video controls, default falsedigital_ptz: # digital zoom and pan via mouse/touch, defaults:mouse_drag_pan: truemouse_wheel_zoom: truemouse_double_click_zoom: truetouch_drag_pan: truetouch_pinch_zoom: truetouch_tap_drag_zoom: truepersist: true # zoom factor and viewport position survive page reloads# digital_ptz: false # to disable all mouse/touch digital zoom and pantitle: My super camera # optional card titleposter: https://home-assistant.io/images/cast/splash.png # still image when stream is loadingmuted: true # initial mute toggle state, default is false (unmuted)intersection: 0.75# auto stop stream when less than 75% of video element is in the screen, 50% by defaultbackground: true # run stream when not displayed (ex. for quick video loading), default falseshortcuts: # custom shortcuts, default none
- name: Recordicon: mdi:record-circle-outlineservice: switch.toggleservice_data:
entity_id: switch.camera_record

Pan, tilt, zoom controls: PTZ config examples.

Paused by default

type: custom:webrtc-cameraposter: dahua1-snap # stream name from go2rtc.yaml (http-snapshot)streams:
- url: ''# empty url, so only poster will be shown
- url: dahua1 # stream name from go2rtc.yaml (rtsp-stream)

Video aspect ratioissue

style: "video {aspect-ratio: 16/9; object-fit: fill;}"

Video rotation

On client (free CPU):

style: 'video {transform: rotate(90deg); aspect-ratio: 1}'

On server - FFmpeg transcoding (high CPU cost)

Hide mode label

style: '.mode {display: none}'

Hide fullscreen button

style: '.fullscreen {display: none}'

Hide screenshot button

style: '.screenshot {display: none}'

Hide PIP button

style: '.pictureinpicture {display: none}'

Shortcuts position

style: ".shortcuts {left: unset; top: 25px; right: 5px; display: flex; flex-direction: column}"

PTZ position

style: ".ptz {right: unset; left: 10px}"

Mode label position

style: '.header {bottom: 6px} .mode {position: absolute; bottom: 0px}'

Header line position

style: '.header {top: unset; bottom: 6px}'

Templates

New in v3.6.0.

Card options shortcuts, style and ptz supports JavaScript templates
In shortcuts and style you can use states related templates
In ptz you can use streamName/streamID related templates (useful for card with multiple templates)

shortcuts:
- name: Barn Lighticon: ${ states['light.yeelight_lamp'].state === 'on' ? 'mdi:outdoor-lamp':'mdi:lamp' }service: light.toggleservice_data:
entity_id: light.yeelight_lamp

ptz:
service: notify.persistent_notificationdata_left:
message: Left for ${ this.streamName } clickeddata_right:
message: Rigth for ${ this.streamID } clicked

Two-way audio

New in v3.4.0.

Only for supported sources in go2rtc
Only for Hass with HTTPS access, this limitation is from the browsers
Only for WebRTC mode
HTTPS is also important for Hass Mobile App!

You should add microphone to media param. You can use two streams: one with mic, second without:

type: 'custom:webrtc-camera'streams:
- url: go2rtc_stream
- url: go2rtc_streammode: webrtcmedia: video,audio,microphone

PS. For Hass Mobile App ensure that you can use microphone with the built-in Assist.

Snapshots to Telegram

Cast or share stream

Component support streaming to Google Cast Chromecast devices (including Android TV and Google Smart Screen). Read more in wiki.

Also component support creating a temporary or permanent link to a stream without sharing access to you Home Assistant. Read more in wiki.

Stream to camera

New in v3.1.0.

go2rtc support play audio files (ex. music or TTS) and live streams (ex. radio) on cameras with two way audio support. You need to:

Check if your camera has supported two way audio source
Setup camera stream in go2rtc.yaml config
Check audio codec, that your camera supports
Create virtual Media Players for your cameras in configuration.yaml:

media_player:
- platform: webrtcname: Dahua Camerastream: dahuaaudio: pcmu/48000
- platform: webrtcname: Tapo Camerastream: tapoaudio: pcma

FAQ

Q. Exernal access with WebRTC doesn't work
A. Read more and don't create new issues.

Q. Audio doesn't work
A. Check what audio codec your camera outputs. And what technology do you use to watch videos. Different technologies support different codecs.

Debug

Add to your configuration.yaml:

logger:
default: warninglogs:
custom_components.webrtc: debug

Known work cameras

Brand	Models	Comment
ActiveCam	AC-D2121IR3
ActiveCam	AC-D7121IR1W	support sound
Android	IP Webcam Pro	support sound, `rtsp://192.168.1.123:8080/h264_ulaw.sdp`
C-tronics	CTIPC-690C	support sound, main : `rtsp://username:password@192.168.1.xx:554/11` or `onvif://username:password@192.168.1.xx:8080?subtype=MainStreamProfileToken`
Dahua	DH-IPC-HDPW1431FP-AS-0280B, VTO2211G-P	support sound
Dahua	VTO2202F-P-S2	read more
EZVIZ	C3S	`rtsp://admin:pass@192.168.1.123:554/h264/ch01/main/av_stream` and `/h264/ch01/sub/av_stream`
EZVIZ	C3W, C3WN, C6CN, C6T	`rtsp://admin:pass@192.168.1.123:554/h264_stream`
EZVIZ	C8C	`rtsp://admin:pass@192.168.1.123:554/channel80`
Foscam	C1	`rtsp://user:pass@192.168.1.123:554/videoMain`
Foscam	C2M, R2M	`rtsp://user:pass@192.168.1.123:88/videoMain`
GW Security	GW5088IP	`rtsp://192.168.1.123:554/mpeg4cif?username=admin&password=123456`
GW Security	GW5078IP	`rtsp://192.168.1.123:554/stream0?username=admin&password=123456`
GW Security	GW5071IP	Not working yet, something similar to `rtsp://admin:123456@192.168.0.207:554/live/main` or `rtsp://192.168.0.207:554/live/main?username=admin&password=123456`
Hikvision	DS-2CD2T47G1-L, DS-2CD1321-I, DS-2CD2143G0-IS	`rtsp://user:pass@192.168.1.123:554/ISAPI/Streaming/Channels/102`
Hikvision	IPC-HDW3849H-AS-PV, IPC-EW5531-AS	wired to nvr DHI-NVR2108HS-8P-I using custom component
Imou	IPC-F42-B2E3 (Bullet 2C 4MP)	`rtsp://admin:password@192.168.1.123:554/cam/realmonitor?channel=1&subtype=0`
QNAP	QUSBCam2	`rtsp://username:password@192.168.1.123:554/channel1`docs
Raspberry Pi	PiCam	read more
Reolink	RLC-410, RLC-410W, RLC-510WA, E1 Pro, E1 Zoom, 4505MP	RLC-510WA support sound, E1 Zoom support sound, PTZ and zoom
Reolink	E1	`rtsp://admin:password@192.168.1.123:554/h264Preview_01_main`
Sonoff	GK-200MP2-B	support sound and PTZ, `rtsp://rtsp:12345678@192.168.1.123:554/av_stream/ch0` and `/av_stream/ch1`
SriHome	SH035	`rtsp://192.168.xxx.xxx:8554/profile0` and `/profile1` and `/profile2`
Topvico		`rtsp://192.168.1.123:8554/stream0` or `rtsp://192.168.1.123:554/ch0_0.264`
TP-Link	Tapo C100/C200/C210/C220/C310	`rtsp://user:pass@192.168.1.123:554/stream1` and `/stream2`
TVT/Secutech	NVR-0808B2-8P	`rtsp://user:pass@192.168.1.123:554/chID=1&streamType=main` and `chID=2&streamType=main`
TVT/Secutech	IPC5-DF28SN	`rtsp://user:pass@192.168.1.123:554/profile1` and `/profile2`
Unifi	G4 Dome, G4 doorbell, G3 Bullet, G3 Flex	Copy the rtsps link from the camera's settings in Unifi Protect, but change the link to `rstp://` (it defaults to rstps://), change the port to `7447`, and remove any query params
Wyze	Cam v2/v3, Cam Pan v1/v2	support sound
Xiaomi	Dafang	with hack, `rtsp://192.168.1.123:8554/unicast` Video: H264, size: 1920x1080, bitrate: 1000, format: VBR, frame rate: 10 Audio: PCMU, rate in: 8000, rate out: 44100
Yale	SV-4CFDVR-2, SV-DAFX	`rtsp://admin:password@192.168.1.123/cam/realmonitor?channel=1&subtype=0`
Yale	SV-DPFX	`rtsp://admin:password@192.168.1.123/cam/realmonitor?channel=1&subtype=1`
Yi	Hi3518e Chipset	with hack
Yi	MStar Infinity Chipset	with hack

Name		Name	Last commit message	Last commit date
.github		.github
custom_components/webrtc		custom_components/webrtc
tests		tests
.gitignore		.gitignore
LICENSE		LICENSE
README.md		README.md
hacs.json		hacs.json
package.json		package.json

Navigation Menu

Repository files navigation

WebRTC Camera

go2rtc

Installation

Configuration

Custom card

Templates

Two-way audio

Snapshots to Telegram

Cast or share stream

Stream to camera

FAQ

Debug

Known work cameras

About

Releases

Used by

Contributors

Languages

Latest commit

History

Folders and files

Repository files navigation

WebRTC Camera

go2rtc

Installation

Configuration

Custom card

Templates

Two-way audio

Snapshots to Telegram

Cast or share stream

Stream to camera

FAQ

Debug

Known work cameras

About

Topics

Resources

Stars

Watchers

Forks

Releases

Used by

Contributors

Languages