netlink - netlink library for go

The netlink package provides a simple netlink library for go. Netlink is the interface a user-space program in linux uses to communicate with the kernel. It can be used to add and remove interfaces, set ip addresses and routes, and configure ipsec. Netlink communication requires elevated privileges, so in most cases this code needs to be run as root. Since low-level netlink messages are inscrutable at best, the library attempts to provide an api that is loosely modeled on the CLI provided by iproute2. Actions like ip link add will be accomplished via a similarly named function like AddLink(). This library began its life as a fork of the netlink functionality in docker/libcontainer but was heavily rewritten to improve testability, performance, and to add new functionality like ipsec xfrm handling.

Local Build and Test

You can use go get command:

go get github.com/vishvananda/netlink

Testing dependencies:

go get github.com/vishvananda/netns

Testing (requires root):

sudo -E go test github.com/vishvananda/netlink

Examples

Add a new bridge and add eth1 into it:

package main
import (
"fmt""github.com/vishvananda/netlink"
)
funcmain() {
la:=netlink.NewLinkAttrs()
la.Name="foo"mybridge:=&netlink.Bridge{LinkAttrs: la}
err:=netlink.LinkAdd(mybridge)
iferr!=nil {
fmt.Printf("could not add %s: %v\n", la.Name, err)
}
eth1, _:=netlink.LinkByName("eth1")
netlink.LinkSetMaster(eth1, mybridge)
}

Note NewLinkAttrs constructor, it sets default values in structure. For now it sets only TxQLen to -1, so kernel will set default by itself. If you're using simple initialization(LinkAttrs{Name: "foo"}) TxQLen will be set to 0 unless you specify it like LinkAttrs{Name: "foo", TxQLen: 1000}.

Add a new ip address to loopback:

package main
import (
"github.com/vishvananda/netlink"
)
funcmain() {
lo, _:=netlink.LinkByName("lo")
addr, _:=netlink.ParseAddr("169.254.169.254/32")
netlink.AddrAdd(lo, addr)
}

Future Work

Many pieces of netlink are not yet fully supported in the high-level interface. Aspects of virtually all of the high-level objects don't exist. Many of the underlying primitives are there, so its a matter of putting the right fields into the high-level objects and making sure that they are serialized and deserialized correctly in the Add and List methods.

There are also a few pieces of low level netlink functionality that still need to be implemented. Routing rules are not in place and some of the more advanced link types. Hopefully there is decent structure and testing in place to make these fairly straightforward to add.

netlink - netlink library for go

The netlink package provides a simple netlink library for go. Netlink is the interface a user-space program in linux uses to communicate with the kernel. It can be used to add and remove interfaces, set ip addresses and routes, and configure ipsec. Netlink communication requires elevated privileges, so in most cases this code needs to be run as root. Since low-level netlink messages are inscrutable at best, the library attempts to provide an api that is loosely modeled on the CLI provided by iproute2. Actions like ip link add will be accomplished via a similarly named function like AddLink(). This library began its life as a fork of the netlink functionality in docker/libcontainer but was heavily rewritten to improve testability, performance, and to add new functionality like ipsec xfrm handling.

Local Build and Test

You can use go get command:

go get github.com/vishvananda/netlink

Testing dependencies:

go get github.com/vishvananda/netns

Testing (requires root):

sudo -E go test github.com/vishvananda/netlink

Examples

Add a new bridge and add eth1 into it:

package main
import (
"fmt""github.com/vishvananda/netlink"
)
funcmain() {
la:=netlink.NewLinkAttrs()
la.Name="foo"mybridge:=&netlink.Bridge{LinkAttrs: la}
err:=netlink.LinkAdd(mybridge)
iferr!=nil {
fmt.Printf("could not add %s: %v\n", la.Name, err)
}
eth1, _:=netlink.LinkByName("eth1")
netlink.LinkSetMaster(eth1, mybridge)
}

Note NewLinkAttrs constructor, it sets default values in structure. For now it sets only TxQLen to -1, so kernel will set default by itself. If you're using simple initialization(LinkAttrs{Name: "foo"}) TxQLen will be set to 0 unless you specify it like LinkAttrs{Name: "foo", TxQLen: 1000}.

Add a new ip address to loopback:

package main
import (
"github.com/vishvananda/netlink"
)
funcmain() {
lo, _:=netlink.LinkByName("lo")
addr, _:=netlink.ParseAddr("169.254.169.254/32")
netlink.AddrAdd(lo, addr)
}

Future Work

Many pieces of netlink are not yet fully supported in the high-level interface. Aspects of virtually all of the high-level objects don't exist. Many of the underlying primitives are there, so its a matter of putting the right fields into the high-level objects and making sure that they are serialized and deserialized correctly in the Add and List methods.

There are also a few pieces of low level netlink functionality that still need to be implemented. Routing rules are not in place and some of the more advanced link types. Hopefully there is decent structure and testing in place to make these fairly straightforward to add.

netlink - netlink library for go

The netlink package provides a simple netlink library for go. Netlink is the interface a user-space program in linux uses to communicate with the kernel. It can be used to add and remove interfaces, set ip addresses and routes, and configure ipsec. Netlink communication requires elevated privileges, so in most cases this code needs to be run as root. Since low-level netlink messages are inscrutable at best, the library attempts to provide an api that is loosely modeled on the CLI provided by iproute2. Actions like ip link add will be accomplished via a similarly named function like AddLink(). This library began its life as a fork of the netlink functionality in docker/libcontainer but was heavily rewritten to improve testability, performance, and to add new functionality like ipsec xfrm handling.

Local Build and Test

You can use go get command:

go get github.com/vishvananda/netlink

Testing dependencies:

go get github.com/vishvananda/netns

Testing (requires root):

sudo -E go test github.com/vishvananda/netlink

Examples

Add a new bridge and add eth1 into it:

package main
import (
"fmt""github.com/vishvananda/netlink"
)
funcmain() {
la:=netlink.NewLinkAttrs()
la.Name="foo"mybridge:=&netlink.Bridge{LinkAttrs: la}
err:=netlink.LinkAdd(mybridge)
iferr!=nil {
fmt.Printf("could not add %s: %v\n", la.Name, err)
}
eth1, _:=netlink.LinkByName("eth1")
netlink.LinkSetMaster(eth1, mybridge)
}

Note NewLinkAttrs constructor, it sets default values in structure. For now it sets only TxQLen to -1, so kernel will set default by itself. If you're using simple initialization(LinkAttrs{Name: "foo"}) TxQLen will be set to 0 unless you specify it like LinkAttrs{Name: "foo", TxQLen: 1000}.

Add a new ip address to loopback:

package main
import (
"github.com/vishvananda/netlink"
)
funcmain() {
lo, _:=netlink.LinkByName("lo")
addr, _:=netlink.ParseAddr("169.254.169.254/32")
netlink.AddrAdd(lo, addr)
}

Future Work

Many pieces of netlink are not yet fully supported in the high-level interface. Aspects of virtually all of the high-level objects don't exist. Many of the underlying primitives are there, so its a matter of putting the right fields into the high-level objects and making sure that they are serialized and deserialized correctly in the Add and List methods.

There are also a few pieces of low level netlink functionality that still need to be implemented. Routing rules are not in place and some of the more advanced link types. Hopefully there is decent structure and testing in place to make these fairly straightforward to add.

netlink - netlink library for go

The netlink package provides a simple netlink library for go. Netlink is the interface a user-space program in linux uses to communicate with the kernel. It can be used to add and remove interfaces, set ip addresses and routes, and configure ipsec. Netlink communication requires elevated privileges, so in most cases this code needs to be run as root. Since low-level netlink messages are inscrutable at best, the library attempts to provide an api that is loosely modeled on the CLI provided by iproute2. Actions like ip link add will be accomplished via a similarly named function like AddLink(). This library began its life as a fork of the netlink functionality in docker/libcontainer but was heavily rewritten to improve testability, performance, and to add new functionality like ipsec xfrm handling.

Local Build and Test

You can use go get command:

go get github.com/vishvananda/netlink

Testing dependencies:

go get github.com/vishvananda/netns

Testing (requires root):

sudo -E go test github.com/vishvananda/netlink

Examples

Add a new bridge and add eth1 into it:

package main
import (
"fmt""github.com/vishvananda/netlink"
)
funcmain() {
la:=netlink.NewLinkAttrs()
la.Name="foo"mybridge:=&netlink.Bridge{LinkAttrs: la}
err:=netlink.LinkAdd(mybridge)
iferr!=nil {
fmt.Printf("could not add %s: %v\n", la.Name, err)
}
eth1, _:=netlink.LinkByName("eth1")
netlink.LinkSetMaster(eth1, mybridge)
}

Note NewLinkAttrs constructor, it sets default values in structure. For now it sets only TxQLen to -1, so kernel will set default by itself. If you're using simple initialization(LinkAttrs{Name: "foo"}) TxQLen will be set to 0 unless you specify it like LinkAttrs{Name: "foo", TxQLen: 1000}.

Add a new ip address to loopback:

package main
import (
"github.com/vishvananda/netlink"
)
funcmain() {
lo, _:=netlink.LinkByName("lo")
addr, _:=netlink.ParseAddr("169.254.169.254/32")
netlink.AddrAdd(lo, addr)
}

Future Work

Many pieces of netlink are not yet fully supported in the high-level interface. Aspects of virtually all of the high-level objects don't exist. Many of the underlying primitives are there, so its a matter of putting the right fields into the high-level objects and making sure that they are serialized and deserialized correctly in the Add and List methods.

There are also a few pieces of low level netlink functionality that still need to be implemented. Routing rules are not in place and some of the more advanced link types. Hopefully there is decent structure and testing in place to make these fairly straightforward to add.

netlink - netlink library for go

The netlink package provides a simple netlink library for go. Netlink is the interface a user-space program in linux uses to communicate with the kernel. It can be used to add and remove interfaces, set ip addresses and routes, and configure ipsec. Netlink communication requires elevated privileges, so in most cases this code needs to be run as root. Since low-level netlink messages are inscrutable at best, the library attempts to provide an api that is loosely modeled on the CLI provided by iproute2. Actions like ip link add will be accomplished via a similarly named function like AddLink(). This library began its life as a fork of the netlink functionality in docker/libcontainer but was heavily rewritten to improve testability, performance, and to add new functionality like ipsec xfrm handling.

Local Build and Test

You can use go get command:

go get github.com/vishvananda/netlink

Testing dependencies:

go get github.com/vishvananda/netns

Testing (requires root):

sudo -E go test github.com/vishvananda/netlink

Examples

Add a new bridge and add eth1 into it:

package main
import (
"fmt""github.com/vishvananda/netlink"
)
funcmain() {
la:=netlink.NewLinkAttrs()
la.Name="foo"mybridge:=&netlink.Bridge{LinkAttrs: la}
err:=netlink.LinkAdd(mybridge)
iferr!=nil {
fmt.Printf("could not add %s: %v\n", la.Name, err)
}
eth1, _:=netlink.LinkByName("eth1")
netlink.LinkSetMaster(eth1, mybridge)
}

Note NewLinkAttrs constructor, it sets default values in structure. For now it sets only TxQLen to -1, so kernel will set default by itself. If you're using simple initialization(LinkAttrs{Name: "foo"}) TxQLen will be set to 0 unless you specify it like LinkAttrs{Name: "foo", TxQLen: 1000}.

Add a new ip address to loopback:

package main
import (
"github.com/vishvananda/netlink"
)
funcmain() {
lo, _:=netlink.LinkByName("lo")
addr, _:=netlink.ParseAddr("169.254.169.254/32")
netlink.AddrAdd(lo, addr)
}

Future Work

Many pieces of netlink are not yet fully supported in the high-level interface. Aspects of virtually all of the high-level objects don't exist. Many of the underlying primitives are there, so its a matter of putting the right fields into the high-level objects and making sure that they are serialized and deserialized correctly in the Add and List methods.

There are also a few pieces of low level netlink functionality that still need to be implemented. Routing rules are not in place and some of the more advanced link types. Hopefully there is decent structure and testing in place to make these fairly straightforward to add.

netlink - netlink library for go

The netlink package provides a simple netlink library for go. Netlink is the interface a user-space program in linux uses to communicate with the kernel. It can be used to add and remove interfaces, set ip addresses and routes, and configure ipsec. Netlink communication requires elevated privileges, so in most cases this code needs to be run as root. Since low-level netlink messages are inscrutable at best, the library attempts to provide an api that is loosely modeled on the CLI provided by iproute2. Actions like ip link add will be accomplished via a similarly named function like AddLink(). This library began its life as a fork of the netlink functionality in docker/libcontainer but was heavily rewritten to improve testability, performance, and to add new functionality like ipsec xfrm handling.

Local Build and Test

You can use go get command:

go get github.com/vishvananda/netlink

Testing dependencies:

go get github.com/vishvananda/netns

Testing (requires root):

sudo -E go test github.com/vishvananda/netlink

Examples

Add a new bridge and add eth1 into it:

package main
import (
"fmt""github.com/vishvananda/netlink"
)
funcmain() {
la:=netlink.NewLinkAttrs()
la.Name="foo"mybridge:=&netlink.Bridge{LinkAttrs: la}
err:=netlink.LinkAdd(mybridge)
iferr!=nil {
fmt.Printf("could not add %s: %v\n", la.Name, err)
}
eth1, _:=netlink.LinkByName("eth1")
netlink.LinkSetMaster(eth1, mybridge)
}

Note NewLinkAttrs constructor, it sets default values in structure. For now it sets only TxQLen to -1, so kernel will set default by itself. If you're using simple initialization(LinkAttrs{Name: "foo"}) TxQLen will be set to 0 unless you specify it like LinkAttrs{Name: "foo", TxQLen: 1000}.

Add a new ip address to loopback:

package main
import (
"github.com/vishvananda/netlink"
)
funcmain() {
lo, _:=netlink.LinkByName("lo")
addr, _:=netlink.ParseAddr("169.254.169.254/32")
netlink.AddrAdd(lo, addr)
}

Future Work

Many pieces of netlink are not yet fully supported in the high-level interface. Aspects of virtually all of the high-level objects don't exist. Many of the underlying primitives are there, so its a matter of putting the right fields into the high-level objects and making sure that they are serialized and deserialized correctly in the Add and List methods.

There are also a few pieces of low level netlink functionality that still need to be implemented. Routing rules are not in place and some of the more advanced link types. Hopefully there is decent structure and testing in place to make these fairly straightforward to add.

netlink - netlink library for go

The netlink package provides a simple netlink library for go. Netlink is the interface a user-space program in linux uses to communicate with the kernel. It can be used to add and remove interfaces, set ip addresses and routes, and configure ipsec. Netlink communication requires elevated privileges, so in most cases this code needs to be run as root. Since low-level netlink messages are inscrutable at best, the library attempts to provide an api that is loosely modeled on the CLI provided by iproute2. Actions like ip link add will be accomplished via a similarly named function like AddLink(). This library began its life as a fork of the netlink functionality in docker/libcontainer but was heavily rewritten to improve testability, performance, and to add new functionality like ipsec xfrm handling.

Local Build and Test

You can use go get command:

go get github.com/vishvananda/netlink

Testing dependencies:

go get github.com/vishvananda/netns

Testing (requires root):

sudo -E go test github.com/vishvananda/netlink

Examples

Add a new bridge and add eth1 into it:

package main
import (
"fmt""github.com/vishvananda/netlink"
)
funcmain() {
la:=netlink.NewLinkAttrs()
la.Name="foo"mybridge:=&netlink.Bridge{LinkAttrs: la}
err:=netlink.LinkAdd(mybridge)
iferr!=nil {
fmt.Printf("could not add %s: %v\n", la.Name, err)
}
eth1, _:=netlink.LinkByName("eth1")
netlink.LinkSetMaster(eth1, mybridge)
}

Note NewLinkAttrs constructor, it sets default values in structure. For now it sets only TxQLen to -1, so kernel will set default by itself. If you're using simple initialization(LinkAttrs{Name: "foo"}) TxQLen will be set to 0 unless you specify it like LinkAttrs{Name: "foo", TxQLen: 1000}.

Add a new ip address to loopback:

package main
import (
"github.com/vishvananda/netlink"
)
funcmain() {
lo, _:=netlink.LinkByName("lo")
addr, _:=netlink.ParseAddr("169.254.169.254/32")
netlink.AddrAdd(lo, addr)
}

Future Work

Many pieces of netlink are not yet fully supported in the high-level interface. Aspects of virtually all of the high-level objects don't exist. Many of the underlying primitives are there, so its a matter of putting the right fields into the high-level objects and making sure that they are serialized and deserialized correctly in the Add and List methods.

There are also a few pieces of low level netlink functionality that still need to be implemented. Routing rules are not in place and some of the more advanced link types. Hopefully there is decent structure and testing in place to make these fairly straightforward to add.

netlink - netlink library for go

The netlink package provides a simple netlink library for go. Netlink is the interface a user-space program in linux uses to communicate with the kernel. It can be used to add and remove interfaces, set ip addresses and routes, and configure ipsec. Netlink communication requires elevated privileges, so in most cases this code needs to be run as root. Since low-level netlink messages are inscrutable at best, the library attempts to provide an api that is loosely modeled on the CLI provided by iproute2. Actions like ip link add will be accomplished via a similarly named function like AddLink(). This library began its life as a fork of the netlink functionality in docker/libcontainer but was heavily rewritten to improve testability, performance, and to add new functionality like ipsec xfrm handling.

Local Build and Test

You can use go get command:

go get github.com/vishvananda/netlink

Testing dependencies:

go get github.com/vishvananda/netns

Testing (requires root):

sudo -E go test github.com/vishvananda/netlink

Examples

Add a new bridge and add eth1 into it:

package main
import (
"fmt""github.com/vishvananda/netlink"
)
funcmain() {
la:=netlink.NewLinkAttrs()
la.Name="foo"mybridge:=&netlink.Bridge{LinkAttrs: la}
err:=netlink.LinkAdd(mybridge)
iferr!=nil {
fmt.Printf("could not add %s: %v\n", la.Name, err)
}
eth1, _:=netlink.LinkByName("eth1")
netlink.LinkSetMaster(eth1, mybridge)
}

Note NewLinkAttrs constructor, it sets default values in structure. For now it sets only TxQLen to -1, so kernel will set default by itself. If you're using simple initialization(LinkAttrs{Name: "foo"}) TxQLen will be set to 0 unless you specify it like LinkAttrs{Name: "foo", TxQLen: 1000}.

Add a new ip address to loopback:

package main
import (
"github.com/vishvananda/netlink"
)
funcmain() {
lo, _:=netlink.LinkByName("lo")
addr, _:=netlink.ParseAddr("169.254.169.254/32")
netlink.AddrAdd(lo, addr)
}

Future Work

Many pieces of netlink are not yet fully supported in the high-level interface. Aspects of virtually all of the high-level objects don't exist. Many of the underlying primitives are there, so its a matter of putting the right fields into the high-level objects and making sure that they are serialized and deserialized correctly in the Add and List methods.

There are also a few pieces of low level netlink functionality that still need to be implemented. Routing rules are not in place and some of the more advanced link types. Hopefully there is decent structure and testing in place to make these fairly straightforward to add.

Name		Name	Last commit message	Last commit date
.github		.github
cmd/ipset-test		cmd/ipset-test
nl		nl
testdata		testdata
.gitignore		.gitignore
CHANGELOG.md		CHANGELOG.md
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md
addr.go		addr.go
addr_linux.go		addr_linux.go
addr_test.go		addr_test.go
bpf_linux.go		bpf_linux.go
bridge_linux.go		bridge_linux.go
bridge_linux_test.go		bridge_linux_test.go
class.go		class.go
class_linux.go		class_linux.go
class_test.go		class_test.go
conntrack_linux.go		conntrack_linux.go
conntrack_test.go		conntrack_test.go
conntrack_unspecified.go		conntrack_unspecified.go
devlink_linux.go		devlink_linux.go
devlink_test.go		devlink_test.go
filter.go		filter.go
filter_linux.go		filter_linux.go
filter_test.go		filter_test.go
fou.go		fou.go
fou_linux.go		fou_linux.go
fou_test.go		fou_test.go
fou_unspecified.go		fou_unspecified.go
genetlink_linux.go		genetlink_linux.go
genetlink_unspecified.go		genetlink_unspecified.go
go.mod		go.mod
go.sum		go.sum
gtp_linux.go		gtp_linux.go
gtp_test.go		gtp_test.go
handle_linux.go		handle_linux.go
handle_linux_test.go		handle_linux_test.go
handle_test.go		handle_test.go
handle_unspecified.go		handle_unspecified.go
inet_diag.go		inet_diag.go
ioctl_linux.go		ioctl_linux.go
ipset_linux.go		ipset_linux.go
ipset_linux_test.go		ipset_linux_test.go
link.go		link.go
link_linux.go		link_linux.go
link_test.go		link_test.go
link_tuntap_linux.go		link_tuntap_linux.go
neigh.go		neigh.go
neigh_linux.go		neigh_linux.go
neigh_test.go		neigh_test.go
netlink.go		netlink.go
netlink_linux.go		netlink_linux.go
netlink_test.go		netlink_test.go
netlink_unspecified.go		netlink_unspecified.go
netns_linux.go		netns_linux.go
netns_test.go		netns_test.go
netns_unspecified.go		netns_unspecified.go
order.go		order.go
proc_event_linux.go		proc_event_linux.go
proc_event_test.go		proc_event_test.go
protinfo.go		protinfo.go
protinfo_linux.go		protinfo_linux.go
protinfo_test.go		protinfo_test.go
qdisc.go		qdisc.go
qdisc_linux.go		qdisc_linux.go
qdisc_test.go		qdisc_test.go
rdma_link_linux.go		rdma_link_linux.go
rdma_link_test.go		rdma_link_test.go
route.go		route.go
route_linux.go		route_linux.go
route_test.go		route_test.go
route_unspecified.go		route_unspecified.go
rule.go		rule.go
rule_linux.go		rule_linux.go
rule_test.go		rule_test.go
socket.go		socket.go
socket_linux.go		socket_linux.go
socket_linux_test.go		socket_linux_test.go
socket_test.go		socket_test.go
tcp.go		tcp.go
tcp_linux.go		tcp_linux.go
tcp_linux_test.go		tcp_linux_test.go
xfrm.go		xfrm.go
xfrm_monitor_linux.go		xfrm_monitor_linux.go
xfrm_monitor_test.go		xfrm_monitor_test.go
xfrm_policy.go		xfrm_policy.go
xfrm_policy_linux.go		xfrm_policy_linux.go
xfrm_policy_test.go		xfrm_policy_test.go
xfrm_state.go		xfrm_state.go
xfrm_state_linux.go		xfrm_state_linux.go
xfrm_state_test.go		xfrm_state_test.go

Name		Name	Last commit message	Last commit date
.github		.github
cmd/ipset-test		cmd/ipset-test
nl		nl
testdata		testdata
.gitignore		.gitignore
CHANGELOG.md		CHANGELOG.md
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md
addr.go		addr.go
addr_linux.go		addr_linux.go
addr_test.go		addr_test.go
bpf_linux.go		bpf_linux.go
bridge_linux.go		bridge_linux.go
bridge_linux_test.go		bridge_linux_test.go
class.go		class.go
class_linux.go		class_linux.go
class_test.go		class_test.go
conntrack_linux.go		conntrack_linux.go
conntrack_test.go		conntrack_test.go
conntrack_unspecified.go		conntrack_unspecified.go
devlink_linux.go		devlink_linux.go
devlink_test.go		devlink_test.go
filter.go		filter.go
filter_linux.go		filter_linux.go
filter_test.go		filter_test.go
fou.go		fou.go
fou_linux.go		fou_linux.go
fou_test.go		fou_test.go
fou_unspecified.go		fou_unspecified.go
genetlink_linux.go		genetlink_linux.go
genetlink_unspecified.go		genetlink_unspecified.go
go.mod		go.mod
go.sum		go.sum
gtp_linux.go		gtp_linux.go
gtp_test.go		gtp_test.go
handle_linux.go		handle_linux.go
handle_linux_test.go		handle_linux_test.go
handle_test.go		handle_test.go
handle_unspecified.go		handle_unspecified.go
inet_diag.go		inet_diag.go
ioctl_linux.go		ioctl_linux.go
ipset_linux.go		ipset_linux.go
ipset_linux_test.go		ipset_linux_test.go
link.go		link.go
link_linux.go		link_linux.go
link_test.go		link_test.go
link_tuntap_linux.go		link_tuntap_linux.go
neigh.go		neigh.go
neigh_linux.go		neigh_linux.go
neigh_test.go		neigh_test.go
netlink.go		netlink.go
netlink_linux.go		netlink_linux.go
netlink_test.go		netlink_test.go
netlink_unspecified.go		netlink_unspecified.go
netns_linux.go		netns_linux.go
netns_test.go		netns_test.go
netns_unspecified.go		netns_unspecified.go
order.go		order.go
proc_event_linux.go		proc_event_linux.go
proc_event_test.go		proc_event_test.go
protinfo.go		protinfo.go
protinfo_linux.go		protinfo_linux.go
protinfo_test.go		protinfo_test.go
qdisc.go		qdisc.go
qdisc_linux.go		qdisc_linux.go
qdisc_test.go		qdisc_test.go
rdma_link_linux.go		rdma_link_linux.go
rdma_link_test.go		rdma_link_test.go
route.go		route.go
route_linux.go		route_linux.go
route_test.go		route_test.go
route_unspecified.go		route_unspecified.go
rule.go		rule.go
rule_linux.go		rule_linux.go
rule_test.go		rule_test.go
socket.go		socket.go
socket_linux.go		socket_linux.go
socket_linux_test.go		socket_linux_test.go
socket_test.go		socket_test.go
tcp.go		tcp.go
tcp_linux.go		tcp_linux.go
tcp_linux_test.go		tcp_linux_test.go
xfrm.go		xfrm.go
xfrm_monitor_linux.go		xfrm_monitor_linux.go
xfrm_monitor_test.go		xfrm_monitor_test.go
xfrm_policy.go		xfrm_policy.go
xfrm_policy_linux.go		xfrm_policy_linux.go
xfrm_policy_test.go		xfrm_policy_test.go
xfrm_state.go		xfrm_state.go
xfrm_state_linux.go		xfrm_state_linux.go
xfrm_state_test.go		xfrm_state_test.go

Name		Name	Last commit message	Last commit date
.github		.github
cmd/ipset-test		cmd/ipset-test
nl		nl
testdata		testdata
.gitignore		.gitignore
CHANGELOG.md		CHANGELOG.md
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md
addr.go		addr.go
addr_linux.go		addr_linux.go
addr_test.go		addr_test.go
bpf_linux.go		bpf_linux.go
bridge_linux.go		bridge_linux.go
bridge_linux_test.go		bridge_linux_test.go
class.go		class.go
class_linux.go		class_linux.go
class_test.go		class_test.go
conntrack_linux.go		conntrack_linux.go
conntrack_test.go		conntrack_test.go
conntrack_unspecified.go		conntrack_unspecified.go
devlink_linux.go		devlink_linux.go
devlink_test.go		devlink_test.go
filter.go		filter.go
filter_linux.go		filter_linux.go
filter_test.go		filter_test.go
fou.go		fou.go
fou_linux.go		fou_linux.go
fou_test.go		fou_test.go
fou_unspecified.go		fou_unspecified.go
genetlink_linux.go		genetlink_linux.go
genetlink_unspecified.go		genetlink_unspecified.go
go.mod		go.mod
go.sum		go.sum
gtp_linux.go		gtp_linux.go
gtp_test.go		gtp_test.go
handle_linux.go		handle_linux.go
handle_linux_test.go		handle_linux_test.go
handle_test.go		handle_test.go
handle_unspecified.go		handle_unspecified.go
inet_diag.go		inet_diag.go
ioctl_linux.go		ioctl_linux.go
ipset_linux.go		ipset_linux.go
ipset_linux_test.go		ipset_linux_test.go
link.go		link.go
link_linux.go		link_linux.go
link_test.go		link_test.go
link_tuntap_linux.go		link_tuntap_linux.go
neigh.go		neigh.go
neigh_linux.go		neigh_linux.go
neigh_test.go		neigh_test.go
netlink.go		netlink.go
netlink_linux.go		netlink_linux.go
netlink_test.go		netlink_test.go
netlink_unspecified.go		netlink_unspecified.go
netns_linux.go		netns_linux.go
netns_test.go		netns_test.go
netns_unspecified.go		netns_unspecified.go
order.go		order.go
proc_event_linux.go		proc_event_linux.go
proc_event_test.go		proc_event_test.go
protinfo.go		protinfo.go
protinfo_linux.go		protinfo_linux.go
protinfo_test.go		protinfo_test.go
qdisc.go		qdisc.go
qdisc_linux.go		qdisc_linux.go
qdisc_test.go		qdisc_test.go
rdma_link_linux.go		rdma_link_linux.go
rdma_link_test.go		rdma_link_test.go
route.go		route.go
route_linux.go		route_linux.go
route_test.go		route_test.go
route_unspecified.go		route_unspecified.go
rule.go		rule.go
rule_linux.go		rule_linux.go
rule_test.go		rule_test.go
socket.go		socket.go
socket_linux.go		socket_linux.go
socket_linux_test.go		socket_linux_test.go
socket_test.go		socket_test.go
tcp.go		tcp.go
tcp_linux.go		tcp_linux.go
tcp_linux_test.go		tcp_linux_test.go
xfrm.go		xfrm.go
xfrm_monitor_linux.go		xfrm_monitor_linux.go
xfrm_monitor_test.go		xfrm_monitor_test.go
xfrm_policy.go		xfrm_policy.go
xfrm_policy_linux.go		xfrm_policy_linux.go
xfrm_policy_test.go		xfrm_policy_test.go
xfrm_state.go		xfrm_state.go
xfrm_state_linux.go		xfrm_state_linux.go
xfrm_state_test.go		xfrm_state_test.go

Name		Name	Last commit message	Last commit date
.github		.github
cmd/ipset-test		cmd/ipset-test
nl		nl
testdata		testdata
.gitignore		.gitignore
CHANGELOG.md		CHANGELOG.md
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md
addr.go		addr.go
addr_linux.go		addr_linux.go
addr_test.go		addr_test.go
bpf_linux.go		bpf_linux.go
bridge_linux.go		bridge_linux.go
bridge_linux_test.go		bridge_linux_test.go
class.go		class.go
class_linux.go		class_linux.go
class_test.go		class_test.go
conntrack_linux.go		conntrack_linux.go
conntrack_test.go		conntrack_test.go
conntrack_unspecified.go		conntrack_unspecified.go
devlink_linux.go		devlink_linux.go
devlink_test.go		devlink_test.go
filter.go		filter.go
filter_linux.go		filter_linux.go
filter_test.go		filter_test.go
fou.go		fou.go
fou_linux.go		fou_linux.go
fou_test.go		fou_test.go
fou_unspecified.go		fou_unspecified.go
genetlink_linux.go		genetlink_linux.go
genetlink_unspecified.go		genetlink_unspecified.go
go.mod		go.mod
go.sum		go.sum
gtp_linux.go		gtp_linux.go
gtp_test.go		gtp_test.go
handle_linux.go		handle_linux.go
handle_linux_test.go		handle_linux_test.go
handle_test.go		handle_test.go
handle_unspecified.go		handle_unspecified.go
inet_diag.go		inet_diag.go
ioctl_linux.go		ioctl_linux.go
ipset_linux.go		ipset_linux.go
ipset_linux_test.go		ipset_linux_test.go
link.go		link.go
link_linux.go		link_linux.go
link_test.go		link_test.go
link_tuntap_linux.go		link_tuntap_linux.go
neigh.go		neigh.go
neigh_linux.go		neigh_linux.go
neigh_test.go		neigh_test.go
netlink.go		netlink.go
netlink_linux.go		netlink_linux.go
netlink_test.go		netlink_test.go
netlink_unspecified.go		netlink_unspecified.go
netns_linux.go		netns_linux.go
netns_test.go		netns_test.go
netns_unspecified.go		netns_unspecified.go
order.go		order.go
proc_event_linux.go		proc_event_linux.go
proc_event_test.go		proc_event_test.go
protinfo.go		protinfo.go
protinfo_linux.go		protinfo_linux.go
protinfo_test.go		protinfo_test.go
qdisc.go		qdisc.go
qdisc_linux.go		qdisc_linux.go
qdisc_test.go		qdisc_test.go
rdma_link_linux.go		rdma_link_linux.go
rdma_link_test.go		rdma_link_test.go
route.go		route.go
route_linux.go		route_linux.go
route_test.go		route_test.go
route_unspecified.go		route_unspecified.go
rule.go		rule.go
rule_linux.go		rule_linux.go
rule_test.go		rule_test.go
socket.go		socket.go
socket_linux.go		socket_linux.go
socket_linux_test.go		socket_linux_test.go
socket_test.go		socket_test.go
tcp.go		tcp.go
tcp_linux.go		tcp_linux.go
tcp_linux_test.go		tcp_linux_test.go
xfrm.go		xfrm.go
xfrm_monitor_linux.go		xfrm_monitor_linux.go
xfrm_monitor_test.go		xfrm_monitor_test.go
xfrm_policy.go		xfrm_policy.go
xfrm_policy_linux.go		xfrm_policy_linux.go
xfrm_policy_test.go		xfrm_policy_test.go
xfrm_state.go		xfrm_state.go
xfrm_state_linux.go		xfrm_state_linux.go
xfrm_state_test.go		xfrm_state_test.go

Name		Name	Last commit message	Last commit date
.github		.github
cmd/ipset-test		cmd/ipset-test
nl		nl
testdata		testdata
.gitignore		.gitignore
CHANGELOG.md		CHANGELOG.md
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md
addr.go		addr.go
addr_linux.go		addr_linux.go
addr_test.go		addr_test.go
bpf_linux.go		bpf_linux.go
bridge_linux.go		bridge_linux.go
bridge_linux_test.go		bridge_linux_test.go
class.go		class.go
class_linux.go		class_linux.go
class_test.go		class_test.go
conntrack_linux.go		conntrack_linux.go
conntrack_test.go		conntrack_test.go
conntrack_unspecified.go		conntrack_unspecified.go
devlink_linux.go		devlink_linux.go
devlink_test.go		devlink_test.go
filter.go		filter.go
filter_linux.go		filter_linux.go
filter_test.go		filter_test.go
fou.go		fou.go
fou_linux.go		fou_linux.go
fou_test.go		fou_test.go
fou_unspecified.go		fou_unspecified.go
genetlink_linux.go		genetlink_linux.go
genetlink_unspecified.go		genetlink_unspecified.go
go.mod		go.mod
go.sum		go.sum
gtp_linux.go		gtp_linux.go
gtp_test.go		gtp_test.go
handle_linux.go		handle_linux.go
handle_linux_test.go		handle_linux_test.go
handle_test.go		handle_test.go
handle_unspecified.go		handle_unspecified.go
inet_diag.go		inet_diag.go
ioctl_linux.go		ioctl_linux.go
ipset_linux.go		ipset_linux.go
ipset_linux_test.go		ipset_linux_test.go
link.go		link.go
link_linux.go		link_linux.go
link_test.go		link_test.go
link_tuntap_linux.go		link_tuntap_linux.go
neigh.go		neigh.go
neigh_linux.go		neigh_linux.go
neigh_test.go		neigh_test.go
netlink.go		netlink.go
netlink_linux.go		netlink_linux.go
netlink_test.go		netlink_test.go
netlink_unspecified.go		netlink_unspecified.go
netns_linux.go		netns_linux.go
netns_test.go		netns_test.go
netns_unspecified.go		netns_unspecified.go
order.go		order.go
proc_event_linux.go		proc_event_linux.go
proc_event_test.go		proc_event_test.go
protinfo.go		protinfo.go
protinfo_linux.go		protinfo_linux.go
protinfo_test.go		protinfo_test.go
qdisc.go		qdisc.go
qdisc_linux.go		qdisc_linux.go
qdisc_test.go		qdisc_test.go
rdma_link_linux.go		rdma_link_linux.go
rdma_link_test.go		rdma_link_test.go
route.go		route.go
route_linux.go		route_linux.go
route_test.go		route_test.go
route_unspecified.go		route_unspecified.go
rule.go		rule.go
rule_linux.go		rule_linux.go
rule_test.go		rule_test.go
socket.go		socket.go
socket_linux.go		socket_linux.go
socket_linux_test.go		socket_linux_test.go
socket_test.go		socket_test.go
tcp.go		tcp.go
tcp_linux.go		tcp_linux.go
tcp_linux_test.go		tcp_linux_test.go
xfrm.go		xfrm.go
xfrm_monitor_linux.go		xfrm_monitor_linux.go
xfrm_monitor_test.go		xfrm_monitor_test.go
xfrm_policy.go		xfrm_policy.go
xfrm_policy_linux.go		xfrm_policy_linux.go
xfrm_policy_test.go		xfrm_policy_test.go
xfrm_state.go		xfrm_state.go
xfrm_state_linux.go		xfrm_state_linux.go
xfrm_state_test.go		xfrm_state_test.go

Uh oh!

Latest commit

History

Folders and files

Repository files navigation

netlink - netlink library for go

Local Build and Test

Examples

Future Work

About

Resources

Stars

Watchers

Forks

Releases

Packages

Used by

Contributors

Languages

Uh oh!

Latest commit

History

Folders and files

Repository files navigation

netlink - netlink library for go

Local Build and Test

Examples

Future Work

About

Resources

Stars

Watchers

Forks

Releases

Packages

Used by

Contributors

Languages

Uh oh!

Latest commit

History

Folders and files

Repository files navigation

netlink - netlink library for go

Local Build and Test

Examples

Future Work

About

Resources

Stars

Watchers

Forks

Releases

Packages

Used by

Contributors

Languages

Uh oh!

Latest commit

History

Folders and files

Repository files navigation

netlink - netlink library for go

Local Build and Test

Examples

Future Work

About

Resources

Stars

Watchers

Forks

Releases

Packages

Used by

Contributors

Languages

Uh oh!

Latest commit

History

Folders and files