Multiplexer

Originally developed as an internal MEV launchpad, Multiplexer is now open-sourced. It provides a flexible smart contract system for executing complex transaction sequences, featuring a Solidity executor contract and a Rust library for building execution flows.

⚠️WARNING: This contract has not been audited. Using this contract with real assets could result in permanent loss of funds. Use at your own risk.

🚀 Quick Start

# Clone the repository
git clone https://github.com/BitFinding/multiplexer.git
cd multiplexer
# Install dependencies and compile contracts# (This uses build.rs to compile contracts/executor.sol and contracts/proxy.sol)
cargo build
# Run tests (requires a mainnet fork RPC URL)
ETH_RPC_URL=https://eth-mainnet.alchemyapi.io/v2/YOUR_API_KEY cargo test

Architecture

The system consists of:

1. executor.sol: The core contract that executes sequences of operations based on provided bytecode. It manages memory (txData) and handles callbacks.
2. proxy.sol: A simple immutable proxy contract used to deploy the executor logic, allowing for potential future upgrades (though the current proxy is basic).
3. Rust Library (src/): Provides a FlowBuilder utility to easily construct the bytecode sequences for the executor, abstracting away the low-level opcode details.

Example Usage

Morpho Flash Loan Example (Rust FlowBuilder)

This example demonstrates how to construct the bytecode for a Morpho flash loan using the Rust FlowBuilder. The goal is to borrow 100 WETH, and the callback data (inner_flow_bytes) will contain the instructions to approve the repayment to Morpho.

use alloy::{
primitives::{address, uint,Address,U256, hex},
sol,
sol_types::SolCall,};use multiplexer_evm::FlowBuilder;// Define necessary constantsconstHUNDRED_ETH:U256 = uint!(100000000000000000000_U256);// 100e18constWETH9:Address = address!("c02aaa39b223fe8d0a0e5c4f27ead9083c756cc2");constMORPHO:Address = address!("BBBBBbbBBb9cC5e90e3b3Af64bdAF62C37EEFFCb");// Simplified Sol definitions for the examplesol!{
interface IERC20{
function approve(address spender, uint256 value) external returns (bool);}
interface IMorpho{
function flashLoan(address token, uint256 assets, bytes calldata data) external;}}/// Generates the bytecode for a Morpho flash loan flow./// The flow borrows 100 WETH and sets up the callback to approve repayment.fngenerate_morpho_flashloan_flow() -> Vec<u8>{// 1. Prepare the inner flow (callback data): Approve WETH repayment.// This flow will be executed by the executor when Morpho calls back into it.// It needs to ensure Morpho can pull the funds back.let approve_calldata = IERC20::approveCall{spender:MORPHO,value:HUNDRED_ETH,// Approve the exact loan amount.// Note: A real flash loan requires approving amount + fee.// The executor must hold sufficient WETH *before* this approval runs.}.abi_encode();let inner_flow_bytes = FlowBuilder::empty().call(WETH9,&approve_calldata,U256::ZERO)// Call WETH9.approve(MORPHO, amount).optimize().build_raw();// Get the raw bytecode for the inner flow.// `build_raw()` produces *only* the sequence of action opcodes.// 2. Prepare the outer flow: Initiate the flash loan.// This is the main flow sent to the executor contract transaction.let flashloan_calldata = IMorpho::flashLoanCall{token:WETH9,// Asset to borrowassets:HUNDRED_ETH,// Amount to borrowdata: inner_flow_bytes.into(),// Pass the repayment flow as callback data}.abi_encode();let main_flow_bytes = FlowBuilder::empty().set_fail()// Revert the entire transaction if any subsequent call fails (including the callback).set_callback(MORPHO)// Set Morpho as the expected callback address. The executor will only// execute the callback data if msg.sender matches this address..call(MORPHO,&flashloan_calldata,U256::ZERO)// Call Morpho.flashLoan(...).optimize()// Apply peephole optimizations.build();// Build the final bytecode sequence.// `build()` prepends the `executeActions()` function selector (0xc94f554d)// to the raw action bytecode generated by `build_raw()`.
main_flow_bytes
}// --- How to use the generated bytecode ---fnmain(){let flow_bytecode = generate_morpho_flashloan_flow();// `flow_bytecode` now contains the sequence:// SETFAIL -> SETCALLBACK(MORPHO) -> CALL(MORPHO, flashLoan(...))// This `flow_bytecode` would be used as the `data` field in an Ethereum transaction// sent to your deployed Executor contract instance.// Important Considerations for Execution:// 1. Funding: The Executor contract must possess enough WETH *after* the flash loan// is granted but *before* the callback completes to successfully execute the// `inner_flow_bytes` (the WETH approval) and allow Morpho to reclaim the funds + fee.// This usually means the Executor needs some initial WETH or the operations *within*// the flash loan (not shown in this basic example) must generate the required WETH.// 2. Gas: Ensure sufficient gas is provided for the main transaction and the callback execution.// 3. Permissions: The transaction sender must be the owner of the Executor contract.println!("Generated Flow Bytecode: 0x{}", hex::encode(&flow_bytecode));}

Low-Level Bytecode Example

Here's an example sequence that performs a basic contract call using the raw opcodes:

# Assume target_addr = 0x... target contract address
# Assume eth_value = 1 ether (in wei)
# Assume function selector = 0xaabbccdd
# Bytecode Sequence:
0x01 0x0040 # CLEARDATA: Allocate 64 bytes for calldata
0x03 <target_addr> # SETADDR: Set target contract address
0x04 <eth_value> # SETVALUE: Set ETH value to send (1 ether)
0x02 0x0000 0x0004 # SETDATA: Set function selector at offset 0, length 4
aabbccdd # ↳ Function selector bytes
0x0A # SETFAIL: Enable revert on failure
0x06 # CALL: Execute the call
0x00 # EOF: End sequence

Core Features

• Sequential execution of multiple operations in a single transaction
• Support for flash loans from multiple protocols (Morpho, Aave)
• Low-level operation support (calls, creates, delegate calls)
• Memory management for transaction data
• Fail-safe mechanisms with configurable error handling

Operations

The contract supports the following operations, encoded as single-byte opcodes:

Opcode	Operation	Description	Encoding Format
0x00	EOF	End of flow marker	0x00
0x01	CLEARDATA	Clear transaction data buffer	0x01 + [size: uint16]
0x02	SETDATA	Set data at specific offset	0x02 + [offset: uint16] + [size: uint16] + [ bytes]
0x03	SETADDR	Set target address	0x03 + [address: bytes20]
0x04	SETVALUE	Set ETH value for calls	0x04 + [value: uint256]
0x05	EXTCODECOPY	Copy external contract code	0x05 + [addr: bytes20] + [dataOffset: uint16] + [codeOffset: uint16] + [size: uint16]
0x06	CALL	Perform external call	0x06
0x07	CREATE	Deploy new contract	0x07
0x08	DELEGATECALL	Perform delegate call	0x08
0x09	SETCALLBACK	Set callback address for flash loans	0x09 + [address: bytes20]
0x0A	SETFAIL	Enable revert on call failure	0x0A
0x0B	CLEARFAIL	Disable revert on call failure	0x0B

Memory Management

The contract maintains a dynamic bytes array (txData) as a working buffer for all operations:

• Memory Layout:
  • 0x00-0x20: Length of array (32 bytes)
  • 0x20-onwards: Actual data bytes

Operations that interact with this buffer:

• CLEARDATA: Clears and resizes the buffer
• SETDATA: Writes data at specific offsets
• EXTCODECOPY: Copies external contract code into the buffer
• CALL/DELEGATECALL/CREATE: Read from the buffer for execution

Flash Loan Support

The contract implements callbacks for multiple flash loan protocols:

Morpho Flash Loan Callback

function onMorphoFlashLoan(uint256amount, bytescalldatadata)

When Morpho calls this function on the executor, the executor will execute the bytecode passed in data.

Aave Flash Loan Callback

function executeOperation(
addressasset,
uint256amount,
uint256premium,
addressinitiator,
bytescalldataparams
)

Security Considerations

• Owner-only access control
• Callback address validation for flash loans (SETCALLBACK)
• Automatic callback address clearing after use (prevents re-entrancy with old callback data)
• Optional failure handling with SETFAIL/CLEARFAIL
• Memory bounds checking for all operations

Development

The contract is developed in Solidity and includes a comprehensive test suite written in Rust. The tests use Anvil for local blockchain simulation.