Skip to content

Home

Jump to bottom
Dr. Charles Bell edited this page Mar 31, 2020 · 38 revisions

Welcome to the MySQL_Connector_Arduino wiki!

This wiki is the new face of the Connector/Arduino project. Here you will find (for those that abhor long technical documentation) a quick start page showing you how to get started quickly using the connector as well as several examples of using the connector with some of the more popular Arduino boards. Later, you can find more details about the connector and how it works.

For those of you new to this project, it is strongly recommended that you attempt the example sketchesbefore attempting your complete project sketch. In fact, if you have problems, taking time to read through the troubleshooting, tips and tricks, and FAQ sections should provide you with answers to the most common problems. You can also visit the common solutions to learn how to solve common tasks for working with MySQL and the connector. Pay particular attention to the limitations section.

If your hardware does not include the traditional Arduino Uno, Mega 2560, etc. board with an Arduino Ethernet or WiFi shield, you will want to check out the hardware guide page to learn more about what hardware (and associated software libraries) you need to ensure success.

Finally, please be sure to read all of the Wiki before opening a new issue for the connector. While the project page is monitored, it is not monitored daily so issues can go some time before being addressed. Plus, at this point, most of the common problems have already been solved. With that, enjoy!

For More Information

You may submit questions and problems with using the connector (but not generic Arduino questions) as an issue on Github, but before asking your question, be sure you’ve read this wiki in its entirety before opening a new issue. Chances are, others have seen your problem and a solution already exists.

For those that want a printed manual with more examples and projects, check out my book, "Beginning Sensor Networks, Second Edition" from Apress.

I will also accept special requests emailed to me directly at drcharlesbell@gmail.com, but I reserve the right to delay my response until time permits. Thus, do not expect an immediate answer (but sometimes I will respond within 24-72 hours).

Clone this wiki locally

, 'i'); if (__m === '*' || __re.test(location.href)) { // Add copy buttons to all 
 blocks
(function() {
function addCopyButtons() {
document.querySelectorAll('pre code').forEach(function(codeBlock) {
if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;
codeBlock.parentElement.setAttribute('data-copy-added', 'true');
var btn = document.createElement('button');
btn.textContent = 'Copy';
btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';
btn.onmouseover = function() { this.style.opacity = '1'; };
btn.onmouseout = function() { this.style.opacity = '0.7'; };
btn.onclick = function() {
navigator.clipboard.writeText(codeBlock.textContent).then(function() {
btn.textContent = 'Copied!';
setTimeout(function() { btn.textContent = 'Copy'; }, 1500);
});
};
codeBlock.parentElement.style.position = 'relative';
codeBlock.parentElement.appendChild(btn);
});
}
addCopyButtons();
// Re-run on dynamic content
var observer = new MutationObserver(addCopyButtons);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '
Home · ChuckBell/MySQL_Connector_Arduino Wiki · GitHub
Skip to content
Home
Jump to bottom

Dr. Charles Bell edited this page Mar 31, 2020
·
38 revisions
Welcome to the MySQL_Connector_Arduino wiki!
This wiki is the new face of the Connector/Arduino project. Here you will find (for those that abhor long technical documentation) a quick start page showing you how to get started quickly using the connector as well as several examples of using the connector with some of the more popular Arduino boards. Later, you can find more details about the connector and how it works.
For those of you new to this project, it is strongly recommended that you attempt the example sketchesbefore attempting your complete project sketch. In fact, if you have problems, taking time to read through the troubleshooting, tips and tricks, and FAQ sections should provide you with answers to the most common problems. You can also visit the common solutions to learn how to solve common tasks for working with MySQL and the connector. Pay particular attention to the limitations section.
If your hardware does not include the traditional Arduino Uno, Mega 2560, etc. board with an Arduino Ethernet or WiFi shield, you will want to check out the hardware guide page to learn more about what hardware (and associated software libraries) you need to ensure success.
Finally, please be sure to read all of the Wiki before opening a new issue for the connector. While the project page is monitored, it is not monitored daily so issues can go some time before being addressed. Plus, at this point, most of the common problems have already been solved. With that, enjoy!
For More Information
You may submit questions and problems with using the connector (but not generic Arduino questions) as an issue on Github, but before asking your question, be sure you’ve read this wiki in its entirety before opening a new issue. Chances are, others have seen your problem and a solution already exists.
For those that want a printed manual with more examples and projects, check out my book, "Beginning Sensor Networks, Second Edition" from Apress.
I will also accept special requests emailed to me directly at drcharlesbell@gmail.com, but I reserve the right to delay my response until time permits. Thus, do not expect an immediate answer (but sometimes I will respond within 24-72 hours).
Clone this wiki locally

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Force GitHub README to respect dark mode
(function() {
var style = document.createElement('style');
style.textContent = '
.markdown-body {
color-scheme: dark light;
}
.markdown-body pre { background: #161b22 !important; }
.markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }
.markdown-body table th, .markdown-body table td { border-color: #30363d !important; }
.markdown-body img { background: #0d1117; }
.markdown-body blockquote { border-left-color: #8b949e; }
.markdown-body hr { border-color: #30363d; }
';
document.head.appendChild(style);
})();
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
Home · ChuckBell/MySQL_Connector_Arduino Wiki · GitHub
Skip to content
Home
Jump to bottom

Dr. Charles Bell edited this page Mar 31, 2020
·
38 revisions
Welcome to the MySQL_Connector_Arduino wiki!
This wiki is the new face of the Connector/Arduino project. Here you will find (for those that abhor long technical documentation) a quick start page showing you how to get started quickly using the connector as well as several examples of using the connector with some of the more popular Arduino boards. Later, you can find more details about the connector and how it works.
For those of you new to this project, it is strongly recommended that you attempt the example sketchesbefore attempting your complete project sketch. In fact, if you have problems, taking time to read through the troubleshooting, tips and tricks, and FAQ sections should provide you with answers to the most common problems. You can also visit the common solutions to learn how to solve common tasks for working with MySQL and the connector. Pay particular attention to the limitations section.
If your hardware does not include the traditional Arduino Uno, Mega 2560, etc. board with an Arduino Ethernet or WiFi shield, you will want to check out the hardware guide page to learn more about what hardware (and associated software libraries) you need to ensure success.
Finally, please be sure to read all of the Wiki before opening a new issue for the connector. While the project page is monitored, it is not monitored daily so issues can go some time before being addressed. Plus, at this point, most of the common problems have already been solved. With that, enjoy!
For More Information
You may submit questions and problems with using the connector (but not generic Arduino questions) as an issue on Github, but before asking your question, be sure you’ve read this wiki in its entirety before opening a new issue. Chances are, others have seen your problem and a solution already exists.
For those that want a printed manual with more examples and projects, check out my book, "Beginning Sensor Networks, Second Edition" from Apress.
I will also accept special requests emailed to me directly at drcharlesbell@gmail.com, but I reserve the right to delay my response until time permits. Thus, do not expect an immediate answer (but sometimes I will respond within 24-72 hours).
Clone this wiki locally

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Highlight search terms from Google/DuckDuckGo/Bing referrer
(function() {
var ref = document.referrer;
var terms = [];
if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {
var url = new URL(ref);
var q = url.searchParams.get('q') || url.searchParams.get('p');
if (q) {
terms = q.split(/\s+/).filter(function(t) { return t.length > 2; });
}
}
if (terms.length === 0) return;
var style = document.createElement('style');
style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';
document.head.appendChild(style);
function highlight(node) {
if (node.nodeType === 3) { // text node
var text = node.textContent;
var found = false;
terms.forEach(function(term) {
var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\]\\]/g, '\\') + ')', 'gi');
if (regex.test(text)) {
found = true;
var frag = document.createDocumentFragment();
var parts = text.split(regex);
parts.forEach(function(part, i) {
if (i % 2 === 0) {
frag.appendChild(document.createTextNode(part));
} else {
var span = document.createElement('span');
span.className = 'userscript-highlight';
span.textContent = part;
frag.appendChild(span);
}
});
node.parentNode.replaceChild(frag, node);
}
});
} else if (node.nodeType === 1 && node.childNodes) { // element
var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];
if (!skipTags.includes(node.tagName)) {
Array.from(node.childNodes).forEach(highlight);
}
}
}
highlight(document.body);
// Re-highlight on dynamic content
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1 || node.nodeType === 3) highlight(node);
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
Home · ChuckBell/MySQL_Connector_Arduino Wiki · GitHub
Skip to content
Home
Jump to bottom

Dr. Charles Bell edited this page Mar 31, 2020
·
38 revisions
Welcome to the MySQL_Connector_Arduino wiki!
This wiki is the new face of the Connector/Arduino project. Here you will find (for those that abhor long technical documentation) a quick start page showing you how to get started quickly using the connector as well as several examples of using the connector with some of the more popular Arduino boards. Later, you can find more details about the connector and how it works.
For those of you new to this project, it is strongly recommended that you attempt the example sketchesbefore attempting your complete project sketch. In fact, if you have problems, taking time to read through the troubleshooting, tips and tricks, and FAQ sections should provide you with answers to the most common problems. You can also visit the common solutions to learn how to solve common tasks for working with MySQL and the connector. Pay particular attention to the limitations section.
If your hardware does not include the traditional Arduino Uno, Mega 2560, etc. board with an Arduino Ethernet or WiFi shield, you will want to check out the hardware guide page to learn more about what hardware (and associated software libraries) you need to ensure success.
Finally, please be sure to read all of the Wiki before opening a new issue for the connector. While the project page is monitored, it is not monitored daily so issues can go some time before being addressed. Plus, at this point, most of the common problems have already been solved. With that, enjoy!
For More Information
You may submit questions and problems with using the connector (but not generic Arduino questions) as an issue on Github, but before asking your question, be sure you’ve read this wiki in its entirety before opening a new issue. Chances are, others have seen your problem and a solution already exists.
For those that want a printed manual with more examples and projects, check out my book, "Beginning Sensor Networks, Second Edition" from Apress.
I will also accept special requests emailed to me directly at drcharlesbell@gmail.com, but I reserve the right to delay my response until time permits. Thus, do not expect an immediate answer (but sometimes I will respond within 24-72 hours).
Clone this wiki locally

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Strip utm_, fbclid, gclid, etc. from all links on page
(function() {
var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',
'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',
'ref', 'ref_src', 'source', 'medium', 'campaign'];
function cleanUrl(url) {
try {
var u = new URL(url, window.location.origin);
var changed = false;
trackingParams.forEach(function(p) {
if (u.searchParams.has(p)) {
u.searchParams.delete(p);
changed = true;
}
});
return changed ? u.toString() : url;
} catch (e) {
return url;
}
}
function cleanLinks() {
document.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
cleanLinks();
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1) {
if (node.tagName === 'A') cleanLinks();
node.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '
Home · ChuckBell/MySQL_Connector_Arduino Wiki · GitHub
Skip to content
Home
Jump to bottom

Dr. Charles Bell edited this page Mar 31, 2020
·
38 revisions
Welcome to the MySQL_Connector_Arduino wiki!
This wiki is the new face of the Connector/Arduino project. Here you will find (for those that abhor long technical documentation) a quick start page showing you how to get started quickly using the connector as well as several examples of using the connector with some of the more popular Arduino boards. Later, you can find more details about the connector and how it works.
For those of you new to this project, it is strongly recommended that you attempt the example sketchesbefore attempting your complete project sketch. In fact, if you have problems, taking time to read through the troubleshooting, tips and tricks, and FAQ sections should provide you with answers to the most common problems. You can also visit the common solutions to learn how to solve common tasks for working with MySQL and the connector. Pay particular attention to the limitations section.
If your hardware does not include the traditional Arduino Uno, Mega 2560, etc. board with an Arduino Ethernet or WiFi shield, you will want to check out the hardware guide page to learn more about what hardware (and associated software libraries) you need to ensure success.
Finally, please be sure to read all of the Wiki before opening a new issue for the connector. While the project page is monitored, it is not monitored daily so issues can go some time before being addressed. Plus, at this point, most of the common problems have already been solved. With that, enjoy!
For More Information
You may submit questions and problems with using the connector (but not generic Arduino questions) as an issue on Github, but before asking your question, be sure you’ve read this wiki in its entirety before opening a new issue. Chances are, others have seen your problem and a solution already exists.
For those that want a printed manual with more examples and projects, check out my book, "Beginning Sensor Networks, Second Edition" from Apress.
I will also accept special requests emailed to me directly at drcharlesbell@gmail.com, but I reserve the right to delay my response until time permits. Thus, do not expect an immediate answer (but sometimes I will respond within 24-72 hours).
Clone this wiki locally

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Auto-enable theater mode on YouTube
(function() {
function tryTheater() {
var btn = document.querySelector('button[aria-label="Theater mode"], ytd-player #player button[title="Theater mode"]');
if (btn && !btn.classList.contains('activated')) {
btn.click();
}
}
// Try immediately
tryTheater();
// Try after navigation (SPA)
var lastUrl = location.href;
setInterval(function() {
if (location.href !== lastUrl) {
lastUrl = location.href;
setTimeout(tryTheater, 500);
}
}, 1000);
// Also try on player load
var observer = new MutationObserver(tryTheater);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
Home · ChuckBell/MySQL_Connector_Arduino Wiki · GitHub
Skip to content
Home
Jump to bottom

Dr. Charles Bell edited this page Mar 31, 2020
·
38 revisions
Welcome to the MySQL_Connector_Arduino wiki!
This wiki is the new face of the Connector/Arduino project. Here you will find (for those that abhor long technical documentation) a quick start page showing you how to get started quickly using the connector as well as several examples of using the connector with some of the more popular Arduino boards. Later, you can find more details about the connector and how it works.
For those of you new to this project, it is strongly recommended that you attempt the example sketchesbefore attempting your complete project sketch. In fact, if you have problems, taking time to read through the troubleshooting, tips and tricks, and FAQ sections should provide you with answers to the most common problems. You can also visit the common solutions to learn how to solve common tasks for working with MySQL and the connector. Pay particular attention to the limitations section.
If your hardware does not include the traditional Arduino Uno, Mega 2560, etc. board with an Arduino Ethernet or WiFi shield, you will want to check out the hardware guide page to learn more about what hardware (and associated software libraries) you need to ensure success.
Finally, please be sure to read all of the Wiki before opening a new issue for the connector. While the project page is monitored, it is not monitored daily so issues can go some time before being addressed. Plus, at this point, most of the common problems have already been solved. With that, enjoy!
For More Information
You may submit questions and problems with using the connector (but not generic Arduino questions) as an issue on Github, but before asking your question, be sure you’ve read this wiki in its entirety before opening a new issue. Chances are, others have seen your problem and a solution already exists.
For those that want a printed manual with more examples and projects, check out my book, "Beginning Sensor Networks, Second Edition" from Apress.
I will also accept special requests emailed to me directly at drcharlesbell@gmail.com, but I reserve the right to delay my response until time permits. Thus, do not expect an immediate answer (but sometimes I will respond within 24-72 hours).
Clone this wiki locally

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Remove or un-stick sticky/fixed headers that block content
(function() {
function unstick() {
document.querySelectorAll('header, nav, [role="banner"], .header, .navbar, .sticky, .fixed-top, [style*="position: fixed"], [style*="position:sticky"]').forEach(function(el) {
if (el.style.position === 'fixed' || el.style.position === 'sticky' || getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {
el.style.position = 'static';
el.style.top = 'auto';
el.style.zIndex = 'auto';
}
});
}
unstick();
var observer = new MutationObserver(unstick);
observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });
})();
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
Home · ChuckBell/MySQL_Connector_Arduino Wiki · GitHub
Skip to content
Home
Jump to bottom

Dr. Charles Bell edited this page Mar 31, 2020
·
38 revisions
Welcome to the MySQL_Connector_Arduino wiki!
This wiki is the new face of the Connector/Arduino project. Here you will find (for those that abhor long technical documentation) a quick start page showing you how to get started quickly using the connector as well as several examples of using the connector with some of the more popular Arduino boards. Later, you can find more details about the connector and how it works.
For those of you new to this project, it is strongly recommended that you attempt the example sketchesbefore attempting your complete project sketch. In fact, if you have problems, taking time to read through the troubleshooting, tips and tricks, and FAQ sections should provide you with answers to the most common problems. You can also visit the common solutions to learn how to solve common tasks for working with MySQL and the connector. Pay particular attention to the limitations section.
If your hardware does not include the traditional Arduino Uno, Mega 2560, etc. board with an Arduino Ethernet or WiFi shield, you will want to check out the hardware guide page to learn more about what hardware (and associated software libraries) you need to ensure success.
Finally, please be sure to read all of the Wiki before opening a new issue for the connector. While the project page is monitored, it is not monitored daily so issues can go some time before being addressed. Plus, at this point, most of the common problems have already been solved. With that, enjoy!
For More Information
You may submit questions and problems with using the connector (but not generic Arduino questions) as an issue on Github, but before asking your question, be sure you’ve read this wiki in its entirety before opening a new issue. Chances are, others have seen your problem and a solution already exists.
For those that want a printed manual with more examples and projects, check out my book, "Beginning Sensor Networks, Second Edition" from Apress.
I will also accept special requests emailed to me directly at drcharlesbell@gmail.com, but I reserve the right to delay my response until time permits. Thus, do not expect an immediate answer (but sometimes I will respond within 24-72 hours).
Clone this wiki locally

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Universal Dark Mode - works on any site
(function() {
var enabled = true;
function applyDarkMode() {
if (!enabled) return;
// Create style element if it doesn't exist
var style = document.getElementById('universal-dark-mode-style');
if (!style) {
style = document.createElement('style');
style.id = 'universal-dark-mode-style';
document.head.appendChild(style);
}
// Dark mode CSS - inverts colors but preserves images/video
style.textContent = '
/* Invert everything except media */
html {
filter: invert(1) hue-rotate(180deg) !important;
background: #1a1a2e !important;
}
/* Restore images, videos, iframes, canvas */
img, video, iframe, canvas, svg, picture, [style*="background-image"] {
filter: invert(1) hue-rotate(180deg) !important;
}
/* Preserve specific elements that should not be inverted */
.no-dark-mode, .no-dark-mode *,
[data-theme="light"], [data-theme="light"],
.ace_editor, .ace_editor *,
.CodeMirror, .CodeMirror *,
.monaco-editor, .monaco-editor *,
.markdown-body pre, .markdown-body pre *,
.highlight, .highlight *,
pre code, pre code * {
filter: none !important;
}
/* Fix common UI elements */
.modal, .popup, .dropdown-menu, .tooltip, .popover {
filter: invert(1) hue-rotate(180deg) !important;
background: #2d2d44 !important;
border-color: #444 !important;
}
/* Scrollbars */
::-webkit-scrollbar { background: #1a1a2e !important; }
::-webkit-scrollbar-thumb { background: #444 !important; }
::-webkit-scrollbar-thumb:hover { background: #555 !important; }
/* Selection */
::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }
::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }
';
}
function removeDarkMode() {
var style = document.getElementById('universal-dark-mode-style');
if (style) style.remove();
}
// Toggle with Alt+Shift+D
document.addEventListener('keydown', function(e) {
if (e.altKey && e.shiftKey && e.key === 'D') {
e.preventDefault();
enabled = !enabled;
if (enabled) {
applyDarkMode();
console.log('[Universal Dark Mode] Enabled');
} else {
removeDarkMode();
console.log('[Universal Dark Mode] Disabled');
}
}
});
// Apply on load
applyDarkMode();
// Re-apply on dynamic content
var observer = new MutationObserver(function(mutations) {
if (enabled && !document.getElementById('universal-dark-mode-style')) {
applyDarkMode();
}
});
observer.observe(document.head, { childList: true });
console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');
})();
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();
Home · ChuckBell/MySQL_Connector_Arduino Wiki · GitHub
Skip to content
Home
Jump to bottom

Dr. Charles Bell edited this page Mar 31, 2020
·
38 revisions
Welcome to the MySQL_Connector_Arduino wiki!
This wiki is the new face of the Connector/Arduino project. Here you will find (for those that abhor long technical documentation) a quick start page showing you how to get started quickly using the connector as well as several examples of using the connector with some of the more popular Arduino boards. Later, you can find more details about the connector and how it works.
For those of you new to this project, it is strongly recommended that you attempt the example sketchesbefore attempting your complete project sketch. In fact, if you have problems, taking time to read through the troubleshooting, tips and tricks, and FAQ sections should provide you with answers to the most common problems. You can also visit the common solutions to learn how to solve common tasks for working with MySQL and the connector. Pay particular attention to the limitations section.
If your hardware does not include the traditional Arduino Uno, Mega 2560, etc. board with an Arduino Ethernet or WiFi shield, you will want to check out the hardware guide page to learn more about what hardware (and associated software libraries) you need to ensure success.
Finally, please be sure to read all of the Wiki before opening a new issue for the connector. While the project page is monitored, it is not monitored daily so issues can go some time before being addressed. Plus, at this point, most of the common problems have already been solved. With that, enjoy!
For More Information
You may submit questions and problems with using the connector (but not generic Arduino questions) as an issue on Github, but before asking your question, be sure you’ve read this wiki in its entirety before opening a new issue. Chances are, others have seen your problem and a solution already exists.
For those that want a printed manual with more examples and projects, check out my book, "Beginning Sensor Networks, Second Edition" from Apress.
I will also accept special requests emailed to me directly at drcharlesbell@gmail.com, but I reserve the right to delay my response until time permits. Thus, do not expect an immediate answer (but sometimes I will respond within 24-72 hours).
Clone this wiki locally