Skip to content

Build gradle failed caused by namespace issue in Android #31

Open
Open
Build gradle failed caused by namespace issue in Android#31

Description

@gopelkujo
gopelkujo
opened on Dec 9, 2024

Step to reproduce

  1. Open your project that using thermal_printer: ^1.0.5 dependencies
  2. Run your project on Android Simulator using flutter run

Expected Result

Launching lib/main.dart on sdk gphone64 arm64 in debug mode...
✓ Built build/app/outputs/flutter-apk/app-debug.apk
Connecting to VM Service at ws://*******/osnDiudsGe0=/ws
Connected to the VM Service

Actual Result

Launching lib/main.dart on sdk gphone64 arm64 in debug mode...
FAILURE: Build completed with 2 failures.
1: Task failed with an exception.
-----------
* What went wrong:
A problem occurred configuring project ':thermal_printer'.
> Could not create an instance of type com.android.build.api.variant.impl.LibraryVariantBuilderImpl.
> Namespace not specified. Specify a namespace in the module's build file: /Users/user/.pub-cache/git/thermal_printer-328a8174b4ae0d67ece77d183ff1f15e4cc4eaa1/android/build.gradle. See https://d.android.com/r/tools/upgrade-assistant/set-namespace for information about setting the namespace.
If you've specified the package attribute in the source AndroidManifest.xml, you can use the AGP Upgrade Assistant to migrate to the namespace value in the build file. Refer to https://d.android.com/r/tools/upgrade-assistant/agp-upgrade-assistant for general information about using the AGP Upgrade Assistant.
* Try:
> Run with --stacktrace option to get the stack trace.
> Run with --info or --debug option to get more log output.
> Run with --scan to get full insights.
> Get more help at https://help.gradle.org.
==============================================================================
2: Task failed with an exception.
-----------
* What went wrong:
Failed to query the value of property 'buildFlowServiceProperty'.
> Could not isolate value org.jetbrains.kotlin.gradle.plugin.statistics.BuildFlowService$Parameters_Decorated@1d9dc4d6 of type BuildFlowService.Parameters
> A problem occurred configuring project ':thermal_printer'.
> Could not create an instance of type com.android.build.api.variant.impl.LibraryVariantBuilderImpl.
> Namespace not specified. Specify a namespace in the module's build file: /Users/user/.pub-cache/git/thermal_printer-328a8174b4ae0d67ece77d183ff1f15e4cc4eaa1/android/build.gradle. See https://d.android.com/r/tools/upgrade-assistant/set-namespace for information about setting the namespace.
If you've specified the package attribute in the source AndroidManifest.xml, you can use the AGP Upgrade Assistant to migrate to the namespace value in the build file. Refer to https://d.android.com/r/tools/upgrade-assistant/agp-upgrade-assistant for general information about using the AGP Upgrade Assistant.
* Try:
> Run with --stacktrace option to get the stack trace.
> Run with --info or --debug option to get more log output.
> Run with --scan to get full insights.
> Get more help at https://help.gradle.org.
==============================================================================
BUILD FAILED in 9s
Error: Gradle task assembleDebug failed with exit code 1
Exited (1).

Flutter Doctor

[✓] Flutter (Channel stable, 3.24.3, on macOS 15.1.1 24B91 darwin-arm64, locale en-ID)
[✓] Android toolchain - develop for Android devices (Android SDK version 34.0.0)
[✓] Xcode - develop for iOS and macOS (Xcode 16.0)
[✓] Chrome - develop for the web
[✓] Android Studio (version 2024.1)
[✓] VS Code (version 1.95.3)
[✓] Connected device (5 available)
[✓] Network resources
• No issues found!

Metadata

Metadata

Assignees

No one assigned

    Labels

    No labels
    No labels

    Type

    No type

    Projects

    No projects

      Milestone

      No milestone

      Relationships

      None yet

      Development

      No branches or pull requests

      Issue actions

      , 'i'); if (__m === '*' || __re.test(location.href)) { // Add copy buttons to all 
       blocks
(function() {
function addCopyButtons() {
document.querySelectorAll('pre code').forEach(function(codeBlock) {
if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;
codeBlock.parentElement.setAttribute('data-copy-added', 'true');
var btn = document.createElement('button');
btn.textContent = 'Copy';
btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';
btn.onmouseover = function() { this.style.opacity = '1'; };
btn.onmouseout = function() { this.style.opacity = '0.7'; };
btn.onclick = function() {
navigator.clipboard.writeText(codeBlock.textContent).then(function() {
btn.textContent = 'Copied!';
setTimeout(function() { btn.textContent = 'Copy'; }, 1500);
});
};
codeBlock.parentElement.style.position = 'relative';
codeBlock.parentElement.appendChild(btn);
});
}
addCopyButtons();
// Re-run on dynamic content
var observer = new MutationObserver(addCopyButtons);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '
Build gradle failed caused by namespace issue in Android · Issue #31 · CodingDevs/thermal_printer · GitHub
      Skip to content
      Build gradle failed caused by namespace issue in Android #31
      Open
      Open
      Build gradle failed caused by namespace issue in Android#31
      Description
      @gopelkujo
      gopelkujo
      opened on Dec 9, 2024
      Step to reproduce
      1. Open your project that using thermal_printer: ^1.0.5 dependencies
      2. Run your project on Android Simulator using flutter run
      Expected Result
      Launching lib/main.dart on sdk gphone64 arm64 in debug mode...
✓ Built build/app/outputs/flutter-apk/app-debug.apk
Connecting to VM Service at ws://*******/osnDiudsGe0=/ws
Connected to the VM Service

      Actual Result
      Launching lib/main.dart on sdk gphone64 arm64 in debug mode...
FAILURE: Build completed with 2 failures.
1: Task failed with an exception.
-----------
* What went wrong:
A problem occurred configuring project ':thermal_printer'.
> Could not create an instance of type com.android.build.api.variant.impl.LibraryVariantBuilderImpl.
> Namespace not specified. Specify a namespace in the module's build file: /Users/user/.pub-cache/git/thermal_printer-328a8174b4ae0d67ece77d183ff1f15e4cc4eaa1/android/build.gradle. See https://d.android.com/r/tools/upgrade-assistant/set-namespace for information about setting the namespace.
If you've specified the package attribute in the source AndroidManifest.xml, you can use the AGP Upgrade Assistant to migrate to the namespace value in the build file. Refer to https://d.android.com/r/tools/upgrade-assistant/agp-upgrade-assistant for general information about using the AGP Upgrade Assistant.
* Try:
> Run with --stacktrace option to get the stack trace.
> Run with --info or --debug option to get more log output.
> Run with --scan to get full insights.
> Get more help at https://help.gradle.org.
==============================================================================
2: Task failed with an exception.
-----------
* What went wrong:
Failed to query the value of property 'buildFlowServiceProperty'.
> Could not isolate value org.jetbrains.kotlin.gradle.plugin.statistics.BuildFlowService$Parameters_Decorated@1d9dc4d6 of type BuildFlowService.Parameters
> A problem occurred configuring project ':thermal_printer'.
> Could not create an instance of type com.android.build.api.variant.impl.LibraryVariantBuilderImpl.
> Namespace not specified. Specify a namespace in the module's build file: /Users/user/.pub-cache/git/thermal_printer-328a8174b4ae0d67ece77d183ff1f15e4cc4eaa1/android/build.gradle. See https://d.android.com/r/tools/upgrade-assistant/set-namespace for information about setting the namespace.
If you've specified the package attribute in the source AndroidManifest.xml, you can use the AGP Upgrade Assistant to migrate to the namespace value in the build file. Refer to https://d.android.com/r/tools/upgrade-assistant/agp-upgrade-assistant for general information about using the AGP Upgrade Assistant.
* Try:
> Run with --stacktrace option to get the stack trace.
> Run with --info or --debug option to get more log output.
> Run with --scan to get full insights.
> Get more help at https://help.gradle.org.
==============================================================================
BUILD FAILED in 9s
Error: Gradle task assembleDebug failed with exit code 1
Exited (1).

      Flutter Doctor
      [✓] Flutter (Channel stable, 3.24.3, on macOS 15.1.1 24B91 darwin-arm64, locale en-ID)
[✓] Android toolchain - develop for Android devices (Android SDK version 34.0.0)
[✓] Xcode - develop for iOS and macOS (Xcode 16.0)
[✓] Chrome - develop for the web
[✓] Android Studio (version 2024.1)
[✓] VS Code (version 1.95.3)
[✓] Connected device (5 available)
[✓] Network resources
• No issues found!

      Metadata
      Metadata
      Assignees
      No one assigned
        Labels
        No labels
        No labels
        Type
        No type
        Projects
        No projects
          Milestone
          No milestone
          Relationships
          None yet
          Development
          No branches or pull requests
          Issue actions
          
, 'i');
if (__m === '*' || __re.test(location.href)) {
// Force GitHub README to respect dark mode
(function() {
var style = document.createElement('style');
style.textContent = '
.markdown-body {
color-scheme: dark light;
}
.markdown-body pre { background: #161b22 !important; }
.markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }
.markdown-body table th, .markdown-body table td { border-color: #30363d !important; }
.markdown-body img { background: #0d1117; }
.markdown-body blockquote { border-left-color: #8b949e; }
.markdown-body hr { border-color: #30363d; }
';
document.head.appendChild(style);
})();
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
Build gradle failed caused by namespace issue in Android · Issue #31 · CodingDevs/thermal_printer · GitHub
          Skip to content
          Build gradle failed caused by namespace issue in Android #31
          Open
          Open
          Build gradle failed caused by namespace issue in Android#31
          Description
          @gopelkujo
          gopelkujo
          opened on Dec 9, 2024
          Step to reproduce
          1. Open your project that using thermal_printer: ^1.0.5 dependencies
          2. Run your project on Android Simulator using flutter run
          Expected Result
          Launching lib/main.dart on sdk gphone64 arm64 in debug mode...
✓ Built build/app/outputs/flutter-apk/app-debug.apk
Connecting to VM Service at ws://*******/osnDiudsGe0=/ws
Connected to the VM Service

          Actual Result
          Launching lib/main.dart on sdk gphone64 arm64 in debug mode...
FAILURE: Build completed with 2 failures.
1: Task failed with an exception.
-----------
* What went wrong:
A problem occurred configuring project ':thermal_printer'.
> Could not create an instance of type com.android.build.api.variant.impl.LibraryVariantBuilderImpl.
> Namespace not specified. Specify a namespace in the module's build file: /Users/user/.pub-cache/git/thermal_printer-328a8174b4ae0d67ece77d183ff1f15e4cc4eaa1/android/build.gradle. See https://d.android.com/r/tools/upgrade-assistant/set-namespace for information about setting the namespace.
If you've specified the package attribute in the source AndroidManifest.xml, you can use the AGP Upgrade Assistant to migrate to the namespace value in the build file. Refer to https://d.android.com/r/tools/upgrade-assistant/agp-upgrade-assistant for general information about using the AGP Upgrade Assistant.
* Try:
> Run with --stacktrace option to get the stack trace.
> Run with --info or --debug option to get more log output.
> Run with --scan to get full insights.
> Get more help at https://help.gradle.org.
==============================================================================
2: Task failed with an exception.
-----------
* What went wrong:
Failed to query the value of property 'buildFlowServiceProperty'.
> Could not isolate value org.jetbrains.kotlin.gradle.plugin.statistics.BuildFlowService$Parameters_Decorated@1d9dc4d6 of type BuildFlowService.Parameters
> A problem occurred configuring project ':thermal_printer'.
> Could not create an instance of type com.android.build.api.variant.impl.LibraryVariantBuilderImpl.
> Namespace not specified. Specify a namespace in the module's build file: /Users/user/.pub-cache/git/thermal_printer-328a8174b4ae0d67ece77d183ff1f15e4cc4eaa1/android/build.gradle. See https://d.android.com/r/tools/upgrade-assistant/set-namespace for information about setting the namespace.
If you've specified the package attribute in the source AndroidManifest.xml, you can use the AGP Upgrade Assistant to migrate to the namespace value in the build file. Refer to https://d.android.com/r/tools/upgrade-assistant/agp-upgrade-assistant for general information about using the AGP Upgrade Assistant.
* Try:
> Run with --stacktrace option to get the stack trace.
> Run with --info or --debug option to get more log output.
> Run with --scan to get full insights.
> Get more help at https://help.gradle.org.
==============================================================================
BUILD FAILED in 9s
Error: Gradle task assembleDebug failed with exit code 1
Exited (1).

          Flutter Doctor
          [✓] Flutter (Channel stable, 3.24.3, on macOS 15.1.1 24B91 darwin-arm64, locale en-ID)
[✓] Android toolchain - develop for Android devices (Android SDK version 34.0.0)
[✓] Xcode - develop for iOS and macOS (Xcode 16.0)
[✓] Chrome - develop for the web
[✓] Android Studio (version 2024.1)
[✓] VS Code (version 1.95.3)
[✓] Connected device (5 available)
[✓] Network resources
• No issues found!

          Metadata
          Metadata
          Assignees
          No one assigned
            Labels
            No labels
            No labels
            Type
            No type
            Projects
            No projects
              Milestone
              No milestone
              Relationships
              None yet
              Development
              No branches or pull requests
              Issue actions
              
, 'i');
if (__m === '*' || __re.test(location.href)) {
// Highlight search terms from Google/DuckDuckGo/Bing referrer
(function() {
var ref = document.referrer;
var terms = [];
if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {
var url = new URL(ref);
var q = url.searchParams.get('q') || url.searchParams.get('p');
if (q) {
terms = q.split(/\s+/).filter(function(t) { return t.length > 2; });
}
}
if (terms.length === 0) return;
var style = document.createElement('style');
style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';
document.head.appendChild(style);
function highlight(node) {
if (node.nodeType === 3) { // text node
var text = node.textContent;
var found = false;
terms.forEach(function(term) {
var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\]\\]/g, '\\') + ')', 'gi');
if (regex.test(text)) {
found = true;
var frag = document.createDocumentFragment();
var parts = text.split(regex);
parts.forEach(function(part, i) {
if (i % 2 === 0) {
frag.appendChild(document.createTextNode(part));
} else {
var span = document.createElement('span');
span.className = 'userscript-highlight';
span.textContent = part;
frag.appendChild(span);
}
});
node.parentNode.replaceChild(frag, node);
}
});
} else if (node.nodeType === 1 && node.childNodes) { // element
var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];
if (!skipTags.includes(node.tagName)) {
Array.from(node.childNodes).forEach(highlight);
}
}
}
highlight(document.body);
// Re-highlight on dynamic content
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1 || node.nodeType === 3) highlight(node);
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
Build gradle failed caused by namespace issue in Android · Issue #31 · CodingDevs/thermal_printer · GitHub
              Skip to content
              Build gradle failed caused by namespace issue in Android #31
              Open
              Open
              Build gradle failed caused by namespace issue in Android#31
              Description
              @gopelkujo
              gopelkujo
              opened on Dec 9, 2024
              Step to reproduce
              1. Open your project that using thermal_printer: ^1.0.5 dependencies
              2. Run your project on Android Simulator using flutter run
              Expected Result
              Launching lib/main.dart on sdk gphone64 arm64 in debug mode...
✓ Built build/app/outputs/flutter-apk/app-debug.apk
Connecting to VM Service at ws://*******/osnDiudsGe0=/ws
Connected to the VM Service

              Actual Result
              Launching lib/main.dart on sdk gphone64 arm64 in debug mode...
FAILURE: Build completed with 2 failures.
1: Task failed with an exception.
-----------
* What went wrong:
A problem occurred configuring project ':thermal_printer'.
> Could not create an instance of type com.android.build.api.variant.impl.LibraryVariantBuilderImpl.
> Namespace not specified. Specify a namespace in the module's build file: /Users/user/.pub-cache/git/thermal_printer-328a8174b4ae0d67ece77d183ff1f15e4cc4eaa1/android/build.gradle. See https://d.android.com/r/tools/upgrade-assistant/set-namespace for information about setting the namespace.
If you've specified the package attribute in the source AndroidManifest.xml, you can use the AGP Upgrade Assistant to migrate to the namespace value in the build file. Refer to https://d.android.com/r/tools/upgrade-assistant/agp-upgrade-assistant for general information about using the AGP Upgrade Assistant.
* Try:
> Run with --stacktrace option to get the stack trace.
> Run with --info or --debug option to get more log output.
> Run with --scan to get full insights.
> Get more help at https://help.gradle.org.
==============================================================================
2: Task failed with an exception.
-----------
* What went wrong:
Failed to query the value of property 'buildFlowServiceProperty'.
> Could not isolate value org.jetbrains.kotlin.gradle.plugin.statistics.BuildFlowService$Parameters_Decorated@1d9dc4d6 of type BuildFlowService.Parameters
> A problem occurred configuring project ':thermal_printer'.
> Could not create an instance of type com.android.build.api.variant.impl.LibraryVariantBuilderImpl.
> Namespace not specified. Specify a namespace in the module's build file: /Users/user/.pub-cache/git/thermal_printer-328a8174b4ae0d67ece77d183ff1f15e4cc4eaa1/android/build.gradle. See https://d.android.com/r/tools/upgrade-assistant/set-namespace for information about setting the namespace.
If you've specified the package attribute in the source AndroidManifest.xml, you can use the AGP Upgrade Assistant to migrate to the namespace value in the build file. Refer to https://d.android.com/r/tools/upgrade-assistant/agp-upgrade-assistant for general information about using the AGP Upgrade Assistant.
* Try:
> Run with --stacktrace option to get the stack trace.
> Run with --info or --debug option to get more log output.
> Run with --scan to get full insights.
> Get more help at https://help.gradle.org.
==============================================================================
BUILD FAILED in 9s
Error: Gradle task assembleDebug failed with exit code 1
Exited (1).

              Flutter Doctor
              [✓] Flutter (Channel stable, 3.24.3, on macOS 15.1.1 24B91 darwin-arm64, locale en-ID)
[✓] Android toolchain - develop for Android devices (Android SDK version 34.0.0)
[✓] Xcode - develop for iOS and macOS (Xcode 16.0)
[✓] Chrome - develop for the web
[✓] Android Studio (version 2024.1)
[✓] VS Code (version 1.95.3)
[✓] Connected device (5 available)
[✓] Network resources
• No issues found!

              Metadata
              Metadata
              Assignees
              No one assigned
                Labels
                No labels
                No labels
                Type
                No type
                Projects
                No projects
                  Milestone
                  No milestone
                  Relationships
                  None yet
                  Development
                  No branches or pull requests
                  Issue actions
                  
, 'i');
if (__m === '*' || __re.test(location.href)) {
// Strip utm_, fbclid, gclid, etc. from all links on page
(function() {
var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',
'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',
'ref', 'ref_src', 'source', 'medium', 'campaign'];
function cleanUrl(url) {
try {
var u = new URL(url, window.location.origin);
var changed = false;
trackingParams.forEach(function(p) {
if (u.searchParams.has(p)) {
u.searchParams.delete(p);
changed = true;
}
});
return changed ? u.toString() : url;
} catch (e) {
return url;
}
}
function cleanLinks() {
document.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
cleanLinks();
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1) {
if (node.tagName === 'A') cleanLinks();
node.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '
Build gradle failed caused by namespace issue in Android · Issue #31 · CodingDevs/thermal_printer · GitHub
                  Skip to content
                  Build gradle failed caused by namespace issue in Android #31
                  Open
                  Open
                  Build gradle failed caused by namespace issue in Android#31
                  Description
                  @gopelkujo
                  gopelkujo
                  opened on Dec 9, 2024
                  Step to reproduce
                  1. Open your project that using thermal_printer: ^1.0.5 dependencies
                  2. Run your project on Android Simulator using flutter run
                  Expected Result
                  Launching lib/main.dart on sdk gphone64 arm64 in debug mode...
✓ Built build/app/outputs/flutter-apk/app-debug.apk
Connecting to VM Service at ws://*******/osnDiudsGe0=/ws
Connected to the VM Service

                  Actual Result
                  Launching lib/main.dart on sdk gphone64 arm64 in debug mode...
FAILURE: Build completed with 2 failures.
1: Task failed with an exception.
-----------
* What went wrong:
A problem occurred configuring project ':thermal_printer'.
> Could not create an instance of type com.android.build.api.variant.impl.LibraryVariantBuilderImpl.
> Namespace not specified. Specify a namespace in the module's build file: /Users/user/.pub-cache/git/thermal_printer-328a8174b4ae0d67ece77d183ff1f15e4cc4eaa1/android/build.gradle. See https://d.android.com/r/tools/upgrade-assistant/set-namespace for information about setting the namespace.
If you've specified the package attribute in the source AndroidManifest.xml, you can use the AGP Upgrade Assistant to migrate to the namespace value in the build file. Refer to https://d.android.com/r/tools/upgrade-assistant/agp-upgrade-assistant for general information about using the AGP Upgrade Assistant.
* Try:
> Run with --stacktrace option to get the stack trace.
> Run with --info or --debug option to get more log output.
> Run with --scan to get full insights.
> Get more help at https://help.gradle.org.
==============================================================================
2: Task failed with an exception.
-----------
* What went wrong:
Failed to query the value of property 'buildFlowServiceProperty'.
> Could not isolate value org.jetbrains.kotlin.gradle.plugin.statistics.BuildFlowService$Parameters_Decorated@1d9dc4d6 of type BuildFlowService.Parameters
> A problem occurred configuring project ':thermal_printer'.
> Could not create an instance of type com.android.build.api.variant.impl.LibraryVariantBuilderImpl.
> Namespace not specified. Specify a namespace in the module's build file: /Users/user/.pub-cache/git/thermal_printer-328a8174b4ae0d67ece77d183ff1f15e4cc4eaa1/android/build.gradle. See https://d.android.com/r/tools/upgrade-assistant/set-namespace for information about setting the namespace.
If you've specified the package attribute in the source AndroidManifest.xml, you can use the AGP Upgrade Assistant to migrate to the namespace value in the build file. Refer to https://d.android.com/r/tools/upgrade-assistant/agp-upgrade-assistant for general information about using the AGP Upgrade Assistant.
* Try:
> Run with --stacktrace option to get the stack trace.
> Run with --info or --debug option to get more log output.
> Run with --scan to get full insights.
> Get more help at https://help.gradle.org.
==============================================================================
BUILD FAILED in 9s
Error: Gradle task assembleDebug failed with exit code 1
Exited (1).

                  Flutter Doctor
                  [✓] Flutter (Channel stable, 3.24.3, on macOS 15.1.1 24B91 darwin-arm64, locale en-ID)
[✓] Android toolchain - develop for Android devices (Android SDK version 34.0.0)
[✓] Xcode - develop for iOS and macOS (Xcode 16.0)
[✓] Chrome - develop for the web
[✓] Android Studio (version 2024.1)
[✓] VS Code (version 1.95.3)
[✓] Connected device (5 available)
[✓] Network resources
• No issues found!

                  Metadata
                  Metadata
                  Assignees
                  No one assigned
                    Labels
                    No labels
                    No labels
                    Type
                    No type
                    Projects
                    No projects
                      Milestone
                      No milestone
                      Relationships
                      None yet
                      Development
                      No branches or pull requests
                      Issue actions
                      
, 'i');
if (__m === '*' || __re.test(location.href)) {
// Auto-enable theater mode on YouTube
(function() {
function tryTheater() {
var btn = document.querySelector('button[aria-label="Theater mode"], ytd-player #player button[title="Theater mode"]');
if (btn && !btn.classList.contains('activated')) {
btn.click();
}
}
// Try immediately
tryTheater();
// Try after navigation (SPA)
var lastUrl = location.href;
setInterval(function() {
if (location.href !== lastUrl) {
lastUrl = location.href;
setTimeout(tryTheater, 500);
}
}, 1000);
// Also try on player load
var observer = new MutationObserver(tryTheater);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
Build gradle failed caused by namespace issue in Android · Issue #31 · CodingDevs/thermal_printer · GitHub
                      Skip to content
                      Build gradle failed caused by namespace issue in Android #31
                      Open
                      Open
                      Build gradle failed caused by namespace issue in Android#31
                      Description
                      @gopelkujo
                      gopelkujo
                      opened on Dec 9, 2024
                      Step to reproduce
                      1. Open your project that using thermal_printer: ^1.0.5 dependencies
                      2. Run your project on Android Simulator using flutter run
                      Expected Result
                      Launching lib/main.dart on sdk gphone64 arm64 in debug mode...
✓ Built build/app/outputs/flutter-apk/app-debug.apk
Connecting to VM Service at ws://*******/osnDiudsGe0=/ws
Connected to the VM Service

                      Actual Result
                      Launching lib/main.dart on sdk gphone64 arm64 in debug mode...
FAILURE: Build completed with 2 failures.
1: Task failed with an exception.
-----------
* What went wrong:
A problem occurred configuring project ':thermal_printer'.
> Could not create an instance of type com.android.build.api.variant.impl.LibraryVariantBuilderImpl.
> Namespace not specified. Specify a namespace in the module's build file: /Users/user/.pub-cache/git/thermal_printer-328a8174b4ae0d67ece77d183ff1f15e4cc4eaa1/android/build.gradle. See https://d.android.com/r/tools/upgrade-assistant/set-namespace for information about setting the namespace.
If you've specified the package attribute in the source AndroidManifest.xml, you can use the AGP Upgrade Assistant to migrate to the namespace value in the build file. Refer to https://d.android.com/r/tools/upgrade-assistant/agp-upgrade-assistant for general information about using the AGP Upgrade Assistant.
* Try:
> Run with --stacktrace option to get the stack trace.
> Run with --info or --debug option to get more log output.
> Run with --scan to get full insights.
> Get more help at https://help.gradle.org.
==============================================================================
2: Task failed with an exception.
-----------
* What went wrong:
Failed to query the value of property 'buildFlowServiceProperty'.
> Could not isolate value org.jetbrains.kotlin.gradle.plugin.statistics.BuildFlowService$Parameters_Decorated@1d9dc4d6 of type BuildFlowService.Parameters
> A problem occurred configuring project ':thermal_printer'.
> Could not create an instance of type com.android.build.api.variant.impl.LibraryVariantBuilderImpl.
> Namespace not specified. Specify a namespace in the module's build file: /Users/user/.pub-cache/git/thermal_printer-328a8174b4ae0d67ece77d183ff1f15e4cc4eaa1/android/build.gradle. See https://d.android.com/r/tools/upgrade-assistant/set-namespace for information about setting the namespace.
If you've specified the package attribute in the source AndroidManifest.xml, you can use the AGP Upgrade Assistant to migrate to the namespace value in the build file. Refer to https://d.android.com/r/tools/upgrade-assistant/agp-upgrade-assistant for general information about using the AGP Upgrade Assistant.
* Try:
> Run with --stacktrace option to get the stack trace.
> Run with --info or --debug option to get more log output.
> Run with --scan to get full insights.
> Get more help at https://help.gradle.org.
==============================================================================
BUILD FAILED in 9s
Error: Gradle task assembleDebug failed with exit code 1
Exited (1).

                      Flutter Doctor
                      [✓] Flutter (Channel stable, 3.24.3, on macOS 15.1.1 24B91 darwin-arm64, locale en-ID)
[✓] Android toolchain - develop for Android devices (Android SDK version 34.0.0)
[✓] Xcode - develop for iOS and macOS (Xcode 16.0)
[✓] Chrome - develop for the web
[✓] Android Studio (version 2024.1)
[✓] VS Code (version 1.95.3)
[✓] Connected device (5 available)
[✓] Network resources
• No issues found!

                      Metadata
                      Metadata
                      Assignees
                      No one assigned
                        Labels
                        No labels
                        No labels
                        Type
                        No type
                        Projects
                        No projects
                          Milestone
                          No milestone
                          Relationships
                          None yet
                          Development
                          No branches or pull requests
                          Issue actions
                          
, 'i');
if (__m === '*' || __re.test(location.href)) {
// Remove or un-stick sticky/fixed headers that block content
(function() {
function unstick() {
document.querySelectorAll('header, nav, [role="banner"], .header, .navbar, .sticky, .fixed-top, [style*="position: fixed"], [style*="position:sticky"]').forEach(function(el) {
if (el.style.position === 'fixed' || el.style.position === 'sticky' || getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {
el.style.position = 'static';
el.style.top = 'auto';
el.style.zIndex = 'auto';
}
});
}
unstick();
var observer = new MutationObserver(unstick);
observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });
})();
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
Build gradle failed caused by namespace issue in Android · Issue #31 · CodingDevs/thermal_printer · GitHub
                          Skip to content
                          Build gradle failed caused by namespace issue in Android #31
                          Open
                          Open
                          Build gradle failed caused by namespace issue in Android#31
                          Description
                          @gopelkujo
                          gopelkujo
                          opened on Dec 9, 2024
                          Step to reproduce
                          1. Open your project that using thermal_printer: ^1.0.5 dependencies
                          2. Run your project on Android Simulator using flutter run
                          Expected Result
                          Launching lib/main.dart on sdk gphone64 arm64 in debug mode...
✓ Built build/app/outputs/flutter-apk/app-debug.apk
Connecting to VM Service at ws://*******/osnDiudsGe0=/ws
Connected to the VM Service

                          Actual Result
                          Launching lib/main.dart on sdk gphone64 arm64 in debug mode...
FAILURE: Build completed with 2 failures.
1: Task failed with an exception.
-----------
* What went wrong:
A problem occurred configuring project ':thermal_printer'.
> Could not create an instance of type com.android.build.api.variant.impl.LibraryVariantBuilderImpl.
> Namespace not specified. Specify a namespace in the module's build file: /Users/user/.pub-cache/git/thermal_printer-328a8174b4ae0d67ece77d183ff1f15e4cc4eaa1/android/build.gradle. See https://d.android.com/r/tools/upgrade-assistant/set-namespace for information about setting the namespace.
If you've specified the package attribute in the source AndroidManifest.xml, you can use the AGP Upgrade Assistant to migrate to the namespace value in the build file. Refer to https://d.android.com/r/tools/upgrade-assistant/agp-upgrade-assistant for general information about using the AGP Upgrade Assistant.
* Try:
> Run with --stacktrace option to get the stack trace.
> Run with --info or --debug option to get more log output.
> Run with --scan to get full insights.
> Get more help at https://help.gradle.org.
==============================================================================
2: Task failed with an exception.
-----------
* What went wrong:
Failed to query the value of property 'buildFlowServiceProperty'.
> Could not isolate value org.jetbrains.kotlin.gradle.plugin.statistics.BuildFlowService$Parameters_Decorated@1d9dc4d6 of type BuildFlowService.Parameters
> A problem occurred configuring project ':thermal_printer'.
> Could not create an instance of type com.android.build.api.variant.impl.LibraryVariantBuilderImpl.
> Namespace not specified. Specify a namespace in the module's build file: /Users/user/.pub-cache/git/thermal_printer-328a8174b4ae0d67ece77d183ff1f15e4cc4eaa1/android/build.gradle. See https://d.android.com/r/tools/upgrade-assistant/set-namespace for information about setting the namespace.
If you've specified the package attribute in the source AndroidManifest.xml, you can use the AGP Upgrade Assistant to migrate to the namespace value in the build file. Refer to https://d.android.com/r/tools/upgrade-assistant/agp-upgrade-assistant for general information about using the AGP Upgrade Assistant.
* Try:
> Run with --stacktrace option to get the stack trace.
> Run with --info or --debug option to get more log output.
> Run with --scan to get full insights.
> Get more help at https://help.gradle.org.
==============================================================================
BUILD FAILED in 9s
Error: Gradle task assembleDebug failed with exit code 1
Exited (1).

                          Flutter Doctor
                          [✓] Flutter (Channel stable, 3.24.3, on macOS 15.1.1 24B91 darwin-arm64, locale en-ID)
[✓] Android toolchain - develop for Android devices (Android SDK version 34.0.0)
[✓] Xcode - develop for iOS and macOS (Xcode 16.0)
[✓] Chrome - develop for the web
[✓] Android Studio (version 2024.1)
[✓] VS Code (version 1.95.3)
[✓] Connected device (5 available)
[✓] Network resources
• No issues found!

                          Metadata
                          Metadata
                          Assignees
                          No one assigned
                            Labels
                            No labels
                            No labels
                            Type
                            No type
                            Projects
                            No projects
                              Milestone
                              No milestone
                              Relationships
                              None yet
                              Development
                              No branches or pull requests
                              Issue actions
                              
, 'i');
if (__m === '*' || __re.test(location.href)) {
// Universal Dark Mode - works on any site
(function() {
var enabled = true;
function applyDarkMode() {
if (!enabled) return;
// Create style element if it doesn't exist
var style = document.getElementById('universal-dark-mode-style');
if (!style) {
style = document.createElement('style');
style.id = 'universal-dark-mode-style';
document.head.appendChild(style);
}
// Dark mode CSS - inverts colors but preserves images/video
style.textContent = '
/* Invert everything except media */
html {
filter: invert(1) hue-rotate(180deg) !important;
background: #1a1a2e !important;
}
/* Restore images, videos, iframes, canvas */
img, video, iframe, canvas, svg, picture, [style*="background-image"] {
filter: invert(1) hue-rotate(180deg) !important;
}
/* Preserve specific elements that should not be inverted */
.no-dark-mode, .no-dark-mode *,
[data-theme="light"], [data-theme="light"],
.ace_editor, .ace_editor *,
.CodeMirror, .CodeMirror *,
.monaco-editor, .monaco-editor *,
.markdown-body pre, .markdown-body pre *,
.highlight, .highlight *,
pre code, pre code * {
filter: none !important;
}
/* Fix common UI elements */
.modal, .popup, .dropdown-menu, .tooltip, .popover {
filter: invert(1) hue-rotate(180deg) !important;
background: #2d2d44 !important;
border-color: #444 !important;
}
/* Scrollbars */
::-webkit-scrollbar { background: #1a1a2e !important; }
::-webkit-scrollbar-thumb { background: #444 !important; }
::-webkit-scrollbar-thumb:hover { background: #555 !important; }
/* Selection */
::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }
::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }
';
}
function removeDarkMode() {
var style = document.getElementById('universal-dark-mode-style');
if (style) style.remove();
}
// Toggle with Alt+Shift+D
document.addEventListener('keydown', function(e) {
if (e.altKey && e.shiftKey && e.key === 'D') {
e.preventDefault();
enabled = !enabled;
if (enabled) {
applyDarkMode();
console.log('[Universal Dark Mode] Enabled');
} else {
removeDarkMode();
console.log('[Universal Dark Mode] Disabled');
}
}
});
// Apply on load
applyDarkMode();
// Re-apply on dynamic content
var observer = new MutationObserver(function(mutations) {
if (enabled && !document.getElementById('universal-dark-mode-style')) {
applyDarkMode();
}
});
observer.observe(document.head, { childList: true });
console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');
})();
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();
Build gradle failed caused by namespace issue in Android · Issue #31 · CodingDevs/thermal_printer · GitHub
                              Skip to content
                              Build gradle failed caused by namespace issue in Android #31
                              Open
                              Open
                              Build gradle failed caused by namespace issue in Android#31
                              Description
                              @gopelkujo
                              gopelkujo
                              opened on Dec 9, 2024
                              Step to reproduce
                              1. Open your project that using thermal_printer: ^1.0.5 dependencies
                              2. Run your project on Android Simulator using flutter run
                              Expected Result
                              Launching lib/main.dart on sdk gphone64 arm64 in debug mode...
✓ Built build/app/outputs/flutter-apk/app-debug.apk
Connecting to VM Service at ws://*******/osnDiudsGe0=/ws
Connected to the VM Service

                              Actual Result
                              Launching lib/main.dart on sdk gphone64 arm64 in debug mode...
FAILURE: Build completed with 2 failures.
1: Task failed with an exception.
-----------
* What went wrong:
A problem occurred configuring project ':thermal_printer'.
> Could not create an instance of type com.android.build.api.variant.impl.LibraryVariantBuilderImpl.
> Namespace not specified. Specify a namespace in the module's build file: /Users/user/.pub-cache/git/thermal_printer-328a8174b4ae0d67ece77d183ff1f15e4cc4eaa1/android/build.gradle. See https://d.android.com/r/tools/upgrade-assistant/set-namespace for information about setting the namespace.
If you've specified the package attribute in the source AndroidManifest.xml, you can use the AGP Upgrade Assistant to migrate to the namespace value in the build file. Refer to https://d.android.com/r/tools/upgrade-assistant/agp-upgrade-assistant for general information about using the AGP Upgrade Assistant.
* Try:
> Run with --stacktrace option to get the stack trace.
> Run with --info or --debug option to get more log output.
> Run with --scan to get full insights.
> Get more help at https://help.gradle.org.
==============================================================================
2: Task failed with an exception.
-----------
* What went wrong:
Failed to query the value of property 'buildFlowServiceProperty'.
> Could not isolate value org.jetbrains.kotlin.gradle.plugin.statistics.BuildFlowService$Parameters_Decorated@1d9dc4d6 of type BuildFlowService.Parameters
> A problem occurred configuring project ':thermal_printer'.
> Could not create an instance of type com.android.build.api.variant.impl.LibraryVariantBuilderImpl.
> Namespace not specified. Specify a namespace in the module's build file: /Users/user/.pub-cache/git/thermal_printer-328a8174b4ae0d67ece77d183ff1f15e4cc4eaa1/android/build.gradle. See https://d.android.com/r/tools/upgrade-assistant/set-namespace for information about setting the namespace.
If you've specified the package attribute in the source AndroidManifest.xml, you can use the AGP Upgrade Assistant to migrate to the namespace value in the build file. Refer to https://d.android.com/r/tools/upgrade-assistant/agp-upgrade-assistant for general information about using the AGP Upgrade Assistant.
* Try:
> Run with --stacktrace option to get the stack trace.
> Run with --info or --debug option to get more log output.
> Run with --scan to get full insights.
> Get more help at https://help.gradle.org.
==============================================================================
BUILD FAILED in 9s
Error: Gradle task assembleDebug failed with exit code 1
Exited (1).

                              Flutter Doctor
                              [✓] Flutter (Channel stable, 3.24.3, on macOS 15.1.1 24B91 darwin-arm64, locale en-ID)
[✓] Android toolchain - develop for Android devices (Android SDK version 34.0.0)
[✓] Xcode - develop for iOS and macOS (Xcode 16.0)
[✓] Chrome - develop for the web
[✓] Android Studio (version 2024.1)
[✓] VS Code (version 1.95.3)
[✓] Connected device (5 available)
[✓] Network resources
• No issues found!

                              Metadata
                              Metadata
                              Assignees
                              No one assigned
                                Labels
                                No labels
                                No labels
                                Type
                                No type
                                Projects
                                No projects
                                  Milestone
                                  No milestone
                                  Relationships
                                  None yet
                                  Development
                                  No branches or pull requests
                                  Issue actions