BranchesTags

Repository files navigation

SDCAlertView

CI StatusCocoaPods

SDCAlertView started out as an alert that looked identical to UIAlertView, but had support for a custom content view. With the introduction of UIAlertController in iOS 8, the project was updated to the more modern API that UIAlertController brought.

Note: While UIAlertController supports the action sheet style alert (previously UIActionSheet), SDCAlertView/SDCAlertController do not support this.

Features

  • Most UIAlertController functionality
  • Custom content views
  • Preventing an alert from dismissing when the user taps a button
  • Easy presentation/dismissal
  • Attributed title label, message label, and buttons
  • Alert appearance customization
  • Usable from Swift and Objective-C
  • Understandable button placement
  • UI tests
  • Carthage support
  • Easy queueing of alerts
  • Custom alert behavior

Requirements

  • Xcode 7 or higher
  • iOS 8 or higher

If you want to use the library on iOS 7, please use version 2.5.4 (the latest 2.x release). SDCAlertView is not available on iOS 6.1 or below.

Installation

To install SDCAlertView using CocoaPods, please integrate it in your existing Podfile, or create a new Podfile:

platform:ios,'8.0'use_frameworks!target'MyApp'dopod'SDCAlertView','~> 3.0'end

Then run pod install.

Usage

SDCAlertView is written in Swift, but can be used in both Swift and Objective-C.

Basic

letalert=AlertController(title:"Title", message:"This is a message")
alert.addAction(AlertAction(title:"Cancel", style:.Default))
alert.addAction(AlertAction(title:"OK", style:.Preferred))
alert.present()
// or use the convenience method:
AlertController.showWithTitle("Title", message:"This is a message", actionTitle:"OK")

Custom Content Views

letspinner=UIActivityIndicatorView(activityIndicatorStyle:.Gray)
spinner.translatesAutoresizingMaskIntoConstraints =false
spinner.startAnimating()letalert=AlertController(title:"Title", message:"Please wait...")
alert.contentView.addSubview(spinner)
spinner.centerXAnchor.constraintEqualToAnchor(alert.contentView.centerXAnchor).active =true
spinner.topAnchor.constraintEqualToAnchor(alert.contentView.topAnchor).active =true
spinner.bottomAnchor.constraintEqualToAnchor(alert.contentView.bottomAnchor).active =true
alert.present()

Dismissal Prevention

letalert=AlertController(title:"Title", message:"This is a message")
alert.addAction(AlertAction(title:"Dismiss", style:.Preferred))
alert.addAction(AlertAction(title:"Don't dismiss", style:.Default))
alert.setShouldDismissHandler{ $0.title =="Dismiss"}
alert.present()

Styling and Appearance

SDCAlertController is a normal view controller, so applying a tintColor to its view will color the buttons and any subviews you add to the contentView.

If you are looking for more customizations, create a type that conforms to VisualStyle and use setVisualStyle() on the AlertController instance. You can also subclass DefaultVisualStyle for a set of default values that you can then override as needed.

Support

I'm pretty active on Stack Overflow, so please use that if you have any questions. You can also use Twitter to contact me directly.

If you are experiencing bugs, feel free to post an issue or submit a pull request. I don't bite, promise!

License

SDCAlertView is distributed under the MIT license.

About

The little alert that could

Resources

Readme
License
Activity
Custom properties

Stars

0 stars

Watchers

1 watching

Forks

0 forks
Report repository

Releases

Packages

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { injectUserscript("// Add copy buttons to all 
 blocks\n(function() {\n function addCopyButtons() {\n document.querySelectorAll('pre code').forEach(function(codeBlock) {\n if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;\n codeBlock.parentElement.setAttribute('data-copy-added', 'true');\n \n var btn = document.createElement('button');\n btn.textContent = 'Copy';\n btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';\n btn.onmouseover = function() { this.style.opacity = '1'; };\n btn.onmouseout = function() { this.style.opacity = '0.7'; };\n btn.onclick = function() {\n navigator.clipboard.writeText(codeBlock.textContent).then(function() {\n btn.textContent = 'Copied!';\n setTimeout(function() { btn.textContent = 'Copy'; }, 1500);\n });\n };\n codeBlock.parentElement.style.position = 'relative';\n codeBlock.parentElement.appendChild(btn);\n });\n }\n \n addCopyButtons();\n \n // Re-run on dynamic content\n var observer = new MutationObserver(addCopyButtons);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Add Copy Buttons to Code Blocks");
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content
BranchesTags
Repository files navigation
SDCAlertView
CI StatusCocoaPods
SDCAlertView started out as an alert that looked identical to UIAlertView, but had support for a custom content view. With the introduction of UIAlertController in iOS 8, the project was updated to the more modern API that UIAlertController brought.
Note: While UIAlertController supports the action sheet style alert (previously UIActionSheet), SDCAlertView/SDCAlertController do not support this.
Features
  •  Most UIAlertController functionality
  •  Custom content views
  •  Preventing an alert from dismissing when the user taps a button
  •  Easy presentation/dismissal
  •  Attributed title label, message label, and buttons
  •  Alert appearance customization
  •  Usable from Swift and Objective-C
  •  Understandable button placement
  •  UI tests
  •  Carthage support
  •  Easy queueing of alerts
  •  Custom alert behavior
Requirements
  • Xcode 7 or higher
  • iOS 8 or higher
If you want to use the library on iOS 7, please use version 2.5.4 (the latest 2.x release). SDCAlertView is not available on iOS 6.1 or below.
Installation
To install SDCAlertView using CocoaPods, please integrate it in your existing Podfile, or create a new Podfile:
platform:ios,'8.0'use_frameworks!target'MyApp'dopod'SDCAlertView','~> 3.0'end
Then run pod install.
Usage
SDCAlertView is written in Swift, but can be used in both Swift and Objective-C.
Basic
letalert=AlertController(title:"Title", message:"This is a message")
alert.addAction(AlertAction(title:"Cancel", style:.Default))
alert.addAction(AlertAction(title:"OK", style:.Preferred))
alert.present()
// or use the convenience method:
AlertController.showWithTitle("Title", message:"This is a message", actionTitle:"OK")
Custom Content Views
letspinner=UIActivityIndicatorView(activityIndicatorStyle:.Gray)
spinner.translatesAutoresizingMaskIntoConstraints =false
spinner.startAnimating()letalert=AlertController(title:"Title", message:"Please wait...")
alert.contentView.addSubview(spinner)
spinner.centerXAnchor.constraintEqualToAnchor(alert.contentView.centerXAnchor).active =true
spinner.topAnchor.constraintEqualToAnchor(alert.contentView.topAnchor).active =true
spinner.bottomAnchor.constraintEqualToAnchor(alert.contentView.bottomAnchor).active =true
alert.present()
Dismissal Prevention
letalert=AlertController(title:"Title", message:"This is a message")
alert.addAction(AlertAction(title:"Dismiss", style:.Preferred))
alert.addAction(AlertAction(title:"Don't dismiss", style:.Default))
alert.setShouldDismissHandler{ $0.title =="Dismiss"}
alert.present()
Styling and Appearance
SDCAlertController is a normal view controller, so applying a tintColor to its view will color the buttons and any subviews you add to the contentView.
If you are looking for more customizations, create a type that conforms to VisualStyle and use setVisualStyle() on the AlertController instance. You can also subclass DefaultVisualStyle for a set of default values that you can then override as needed.
Support
I'm pretty active on Stack Overflow, so please use that if you have any questions. You can also use Twitter to contact me directly.
If you are experiencing bugs, feel free to post an issue or submit a pull request. I don't bite, promise!
License
SDCAlertView is distributed under the MIT license.
About
The little alert that could
Resources
Readme
License
Activity
Custom properties
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Force GitHub README to respect dark mode\n(function() {\n var style = document.createElement('style');\n style.textContent = '\n .markdown-body {\n color-scheme: dark light;\n }\n .markdown-body pre { background: #161b22 !important; }\n .markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }\n .markdown-body table th, .markdown-body table td { border-color: #30363d !important; }\n .markdown-body img { background: #0d1117; }\n .markdown-body blockquote { border-left-color: #8b949e; }\n .markdown-body hr { border-color: #30363d; }\n ';\n document.head.appendChild(style);\n})();", "GitHub Dark Mode README Fix");
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
SDCAlertView
CI StatusCocoaPods
SDCAlertView started out as an alert that looked identical to UIAlertView, but had support for a custom content view. With the introduction of UIAlertController in iOS 8, the project was updated to the more modern API that UIAlertController brought.
Note: While UIAlertController supports the action sheet style alert (previously UIActionSheet), SDCAlertView/SDCAlertController do not support this.
Features
  •  Most UIAlertController functionality
  •  Custom content views
  •  Preventing an alert from dismissing when the user taps a button
  •  Easy presentation/dismissal
  •  Attributed title label, message label, and buttons
  •  Alert appearance customization
  •  Usable from Swift and Objective-C
  •  Understandable button placement
  •  UI tests
  •  Carthage support
  •  Easy queueing of alerts
  •  Custom alert behavior
Requirements
  • Xcode 7 or higher
  • iOS 8 or higher
If you want to use the library on iOS 7, please use version 2.5.4 (the latest 2.x release). SDCAlertView is not available on iOS 6.1 or below.
Installation
To install SDCAlertView using CocoaPods, please integrate it in your existing Podfile, or create a new Podfile:
platform:ios,'8.0'use_frameworks!target'MyApp'dopod'SDCAlertView','~> 3.0'end
Then run pod install.
Usage
SDCAlertView is written in Swift, but can be used in both Swift and Objective-C.
Basic
letalert=AlertController(title:"Title", message:"This is a message")
alert.addAction(AlertAction(title:"Cancel", style:.Default))
alert.addAction(AlertAction(title:"OK", style:.Preferred))
alert.present()
// or use the convenience method:
AlertController.showWithTitle("Title", message:"This is a message", actionTitle:"OK")
Custom Content Views
letspinner=UIActivityIndicatorView(activityIndicatorStyle:.Gray)
spinner.translatesAutoresizingMaskIntoConstraints =false
spinner.startAnimating()letalert=AlertController(title:"Title", message:"Please wait...")
alert.contentView.addSubview(spinner)
spinner.centerXAnchor.constraintEqualToAnchor(alert.contentView.centerXAnchor).active =true
spinner.topAnchor.constraintEqualToAnchor(alert.contentView.topAnchor).active =true
spinner.bottomAnchor.constraintEqualToAnchor(alert.contentView.bottomAnchor).active =true
alert.present()
Dismissal Prevention
letalert=AlertController(title:"Title", message:"This is a message")
alert.addAction(AlertAction(title:"Dismiss", style:.Preferred))
alert.addAction(AlertAction(title:"Don't dismiss", style:.Default))
alert.setShouldDismissHandler{ $0.title =="Dismiss"}
alert.present()
Styling and Appearance
SDCAlertController is a normal view controller, so applying a tintColor to its view will color the buttons and any subviews you add to the contentView.
If you are looking for more customizations, create a type that conforms to VisualStyle and use setVisualStyle() on the AlertController instance. You can also subclass DefaultVisualStyle for a set of default values that you can then override as needed.
Support
I'm pretty active on Stack Overflow, so please use that if you have any questions. You can also use Twitter to contact me directly.
If you are experiencing bugs, feel free to post an issue or submit a pull request. I don't bite, promise!
License
SDCAlertView is distributed under the MIT license.
About
The little alert that could
Resources
Readme
License
Activity
Custom properties
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Highlight search terms from Google/DuckDuckGo/Bing referrer\n(function() {\n var ref = document.referrer;\n var terms = [];\n \n if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {\n var url = new URL(ref);\n var q = url.searchParams.get('q') || url.searchParams.get('p');\n if (q) {\n terms = q.split(/\\s+/).filter(function(t) { return t.length > 2; });\n }\n }\n \n if (terms.length === 0) return;\n \n var style = document.createElement('style');\n style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';\n document.head.appendChild(style);\n \n function highlight(node) {\n if (node.nodeType === 3) { // text node\n var text = node.textContent;\n var found = false;\n terms.forEach(function(term) {\n var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\\]\\\\]/g, '\\\\') + ')', 'gi');\n if (regex.test(text)) {\n found = true;\n var frag = document.createDocumentFragment();\n var parts = text.split(regex);\n parts.forEach(function(part, i) {\n if (i % 2 === 0) {\n frag.appendChild(document.createTextNode(part));\n } else {\n var span = document.createElement('span');\n span.className = 'userscript-highlight';\n span.textContent = part;\n frag.appendChild(span);\n }\n });\n node.parentNode.replaceChild(frag, node);\n }\n });\n } else if (node.nodeType === 1 && node.childNodes) { // element\n var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];\n if (!skipTags.includes(node.tagName)) {\n Array.from(node.childNodes).forEach(highlight);\n }\n }\n }\n \n highlight(document.body);\n \n // Re-highlight on dynamic content\n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1 || node.nodeType === 3) highlight(node);\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Highlight Search Terms");
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
SDCAlertView
CI StatusCocoaPods
SDCAlertView started out as an alert that looked identical to UIAlertView, but had support for a custom content view. With the introduction of UIAlertController in iOS 8, the project was updated to the more modern API that UIAlertController brought.
Note: While UIAlertController supports the action sheet style alert (previously UIActionSheet), SDCAlertView/SDCAlertController do not support this.
Features
  •  Most UIAlertController functionality
  •  Custom content views
  •  Preventing an alert from dismissing when the user taps a button
  •  Easy presentation/dismissal
  •  Attributed title label, message label, and buttons
  •  Alert appearance customization
  •  Usable from Swift and Objective-C
  •  Understandable button placement
  •  UI tests
  •  Carthage support
  •  Easy queueing of alerts
  •  Custom alert behavior
Requirements
  • Xcode 7 or higher
  • iOS 8 or higher
If you want to use the library on iOS 7, please use version 2.5.4 (the latest 2.x release). SDCAlertView is not available on iOS 6.1 or below.
Installation
To install SDCAlertView using CocoaPods, please integrate it in your existing Podfile, or create a new Podfile:
platform:ios,'8.0'use_frameworks!target'MyApp'dopod'SDCAlertView','~> 3.0'end
Then run pod install.
Usage
SDCAlertView is written in Swift, but can be used in both Swift and Objective-C.
Basic
letalert=AlertController(title:"Title", message:"This is a message")
alert.addAction(AlertAction(title:"Cancel", style:.Default))
alert.addAction(AlertAction(title:"OK", style:.Preferred))
alert.present()
// or use the convenience method:
AlertController.showWithTitle("Title", message:"This is a message", actionTitle:"OK")
Custom Content Views
letspinner=UIActivityIndicatorView(activityIndicatorStyle:.Gray)
spinner.translatesAutoresizingMaskIntoConstraints =false
spinner.startAnimating()letalert=AlertController(title:"Title", message:"Please wait...")
alert.contentView.addSubview(spinner)
spinner.centerXAnchor.constraintEqualToAnchor(alert.contentView.centerXAnchor).active =true
spinner.topAnchor.constraintEqualToAnchor(alert.contentView.topAnchor).active =true
spinner.bottomAnchor.constraintEqualToAnchor(alert.contentView.bottomAnchor).active =true
alert.present()
Dismissal Prevention
letalert=AlertController(title:"Title", message:"This is a message")
alert.addAction(AlertAction(title:"Dismiss", style:.Preferred))
alert.addAction(AlertAction(title:"Don't dismiss", style:.Default))
alert.setShouldDismissHandler{ $0.title =="Dismiss"}
alert.present()
Styling and Appearance
SDCAlertController is a normal view controller, so applying a tintColor to its view will color the buttons and any subviews you add to the contentView.
If you are looking for more customizations, create a type that conforms to VisualStyle and use setVisualStyle() on the AlertController instance. You can also subclass DefaultVisualStyle for a set of default values that you can then override as needed.
Support
I'm pretty active on Stack Overflow, so please use that if you have any questions. You can also use Twitter to contact me directly.
If you are experiencing bugs, feel free to post an issue or submit a pull request. I don't bite, promise!
License
SDCAlertView is distributed under the MIT license.
About
The little alert that could
Resources
Readme
License
Activity
Custom properties
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Strip utm_, fbclid, gclid, etc. from all links on page\n(function() {\n var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',\n 'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',\n 'ref', 'ref_src', 'source', 'medium', 'campaign'];\n \n function cleanUrl(url) {\n try {\n var u = new URL(url, window.location.origin);\n var changed = false;\n trackingParams.forEach(function(p) {\n if (u.searchParams.has(p)) {\n u.searchParams.delete(p);\n changed = true;\n }\n });\n return changed ? u.toString() : url;\n } catch (e) {\n return url;\n }\n }\n \n function cleanLinks() {\n document.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n \n cleanLinks();\n \n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1) {\n if (node.tagName === 'A') cleanLinks();\n node.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Remove Tracking Parameters from Links");
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content
BranchesTags
Repository files navigation
SDCAlertView
CI StatusCocoaPods
SDCAlertView started out as an alert that looked identical to UIAlertView, but had support for a custom content view. With the introduction of UIAlertController in iOS 8, the project was updated to the more modern API that UIAlertController brought.
Note: While UIAlertController supports the action sheet style alert (previously UIActionSheet), SDCAlertView/SDCAlertController do not support this.
Features
  •  Most UIAlertController functionality
  •  Custom content views
  •  Preventing an alert from dismissing when the user taps a button
  •  Easy presentation/dismissal
  •  Attributed title label, message label, and buttons
  •  Alert appearance customization
  •  Usable from Swift and Objective-C
  •  Understandable button placement
  •  UI tests
  •  Carthage support
  •  Easy queueing of alerts
  •  Custom alert behavior
Requirements
  • Xcode 7 or higher
  • iOS 8 or higher
If you want to use the library on iOS 7, please use version 2.5.4 (the latest 2.x release). SDCAlertView is not available on iOS 6.1 or below.
Installation
To install SDCAlertView using CocoaPods, please integrate it in your existing Podfile, or create a new Podfile:
platform:ios,'8.0'use_frameworks!target'MyApp'dopod'SDCAlertView','~> 3.0'end
Then run pod install.
Usage
SDCAlertView is written in Swift, but can be used in both Swift and Objective-C.
Basic
letalert=AlertController(title:"Title", message:"This is a message")
alert.addAction(AlertAction(title:"Cancel", style:.Default))
alert.addAction(AlertAction(title:"OK", style:.Preferred))
alert.present()
// or use the convenience method:
AlertController.showWithTitle("Title", message:"This is a message", actionTitle:"OK")
Custom Content Views
letspinner=UIActivityIndicatorView(activityIndicatorStyle:.Gray)
spinner.translatesAutoresizingMaskIntoConstraints =false
spinner.startAnimating()letalert=AlertController(title:"Title", message:"Please wait...")
alert.contentView.addSubview(spinner)
spinner.centerXAnchor.constraintEqualToAnchor(alert.contentView.centerXAnchor).active =true
spinner.topAnchor.constraintEqualToAnchor(alert.contentView.topAnchor).active =true
spinner.bottomAnchor.constraintEqualToAnchor(alert.contentView.bottomAnchor).active =true
alert.present()
Dismissal Prevention
letalert=AlertController(title:"Title", message:"This is a message")
alert.addAction(AlertAction(title:"Dismiss", style:.Preferred))
alert.addAction(AlertAction(title:"Don't dismiss", style:.Default))
alert.setShouldDismissHandler{ $0.title =="Dismiss"}
alert.present()
Styling and Appearance
SDCAlertController is a normal view controller, so applying a tintColor to its view will color the buttons and any subviews you add to the contentView.
If you are looking for more customizations, create a type that conforms to VisualStyle and use setVisualStyle() on the AlertController instance. You can also subclass DefaultVisualStyle for a set of default values that you can then override as needed.
Support
I'm pretty active on Stack Overflow, so please use that if you have any questions. You can also use Twitter to contact me directly.
If you are experiencing bugs, feel free to post an issue or submit a pull request. I don't bite, promise!
License
SDCAlertView is distributed under the MIT license.
About
The little alert that could
Resources
Readme
License
Activity
Custom properties
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Auto-enable theater mode on YouTube\n(function() {\n function tryTheater() {\n var btn = document.querySelector('button[aria-label=\"Theater mode\"], ytd-player #player button[title=\"Theater mode\"]');\n if (btn && !btn.classList.contains('activated')) {\n btn.click();\n }\n }\n \n // Try immediately\n tryTheater();\n \n // Try after navigation (SPA)\n var lastUrl = location.href;\n setInterval(function() {\n if (location.href !== lastUrl) {\n lastUrl = location.href;\n setTimeout(tryTheater, 500);\n }\n }, 1000);\n \n // Also try on player load\n var observer = new MutationObserver(tryTheater);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "YouTube Theater Mode Default");
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
SDCAlertView
CI StatusCocoaPods
SDCAlertView started out as an alert that looked identical to UIAlertView, but had support for a custom content view. With the introduction of UIAlertController in iOS 8, the project was updated to the more modern API that UIAlertController brought.
Note: While UIAlertController supports the action sheet style alert (previously UIActionSheet), SDCAlertView/SDCAlertController do not support this.
Features
  •  Most UIAlertController functionality
  •  Custom content views
  •  Preventing an alert from dismissing when the user taps a button
  •  Easy presentation/dismissal
  •  Attributed title label, message label, and buttons
  •  Alert appearance customization
  •  Usable from Swift and Objective-C
  •  Understandable button placement
  •  UI tests
  •  Carthage support
  •  Easy queueing of alerts
  •  Custom alert behavior
Requirements
  • Xcode 7 or higher
  • iOS 8 or higher
If you want to use the library on iOS 7, please use version 2.5.4 (the latest 2.x release). SDCAlertView is not available on iOS 6.1 or below.
Installation
To install SDCAlertView using CocoaPods, please integrate it in your existing Podfile, or create a new Podfile:
platform:ios,'8.0'use_frameworks!target'MyApp'dopod'SDCAlertView','~> 3.0'end
Then run pod install.
Usage
SDCAlertView is written in Swift, but can be used in both Swift and Objective-C.
Basic
letalert=AlertController(title:"Title", message:"This is a message")
alert.addAction(AlertAction(title:"Cancel", style:.Default))
alert.addAction(AlertAction(title:"OK", style:.Preferred))
alert.present()
// or use the convenience method:
AlertController.showWithTitle("Title", message:"This is a message", actionTitle:"OK")
Custom Content Views
letspinner=UIActivityIndicatorView(activityIndicatorStyle:.Gray)
spinner.translatesAutoresizingMaskIntoConstraints =false
spinner.startAnimating()letalert=AlertController(title:"Title", message:"Please wait...")
alert.contentView.addSubview(spinner)
spinner.centerXAnchor.constraintEqualToAnchor(alert.contentView.centerXAnchor).active =true
spinner.topAnchor.constraintEqualToAnchor(alert.contentView.topAnchor).active =true
spinner.bottomAnchor.constraintEqualToAnchor(alert.contentView.bottomAnchor).active =true
alert.present()
Dismissal Prevention
letalert=AlertController(title:"Title", message:"This is a message")
alert.addAction(AlertAction(title:"Dismiss", style:.Preferred))
alert.addAction(AlertAction(title:"Don't dismiss", style:.Default))
alert.setShouldDismissHandler{ $0.title =="Dismiss"}
alert.present()
Styling and Appearance
SDCAlertController is a normal view controller, so applying a tintColor to its view will color the buttons and any subviews you add to the contentView.
If you are looking for more customizations, create a type that conforms to VisualStyle and use setVisualStyle() on the AlertController instance. You can also subclass DefaultVisualStyle for a set of default values that you can then override as needed.
Support
I'm pretty active on Stack Overflow, so please use that if you have any questions. You can also use Twitter to contact me directly.
If you are experiencing bugs, feel free to post an issue or submit a pull request. I don't bite, promise!
License
SDCAlertView is distributed under the MIT license.
About
The little alert that could
Resources
Readme
License
Activity
Custom properties
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Remove or un-stick sticky/fixed headers that block content\n(function() {\n function unstick() {\n document.querySelectorAll('header, nav, [role=\"banner\"], .header, .navbar, .sticky, .fixed-top, [style*=\"position: fixed\"], [style*=\"position:sticky\"]').forEach(function(el) {\n if (el.style.position === 'fixed' || el.style.position === 'sticky' || \n getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {\n el.style.position = 'static';\n el.style.top = 'auto';\n el.style.zIndex = 'auto';\n }\n });\n }\n \n unstick();\n \n var observer = new MutationObserver(unstick);\n observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });\n})();", "Kill Sticky Headers");
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
SDCAlertView
CI StatusCocoaPods
SDCAlertView started out as an alert that looked identical to UIAlertView, but had support for a custom content view. With the introduction of UIAlertController in iOS 8, the project was updated to the more modern API that UIAlertController brought.
Note: While UIAlertController supports the action sheet style alert (previously UIActionSheet), SDCAlertView/SDCAlertController do not support this.
Features
  •  Most UIAlertController functionality
  •  Custom content views
  •  Preventing an alert from dismissing when the user taps a button
  •  Easy presentation/dismissal
  •  Attributed title label, message label, and buttons
  •  Alert appearance customization
  •  Usable from Swift and Objective-C
  •  Understandable button placement
  •  UI tests
  •  Carthage support
  •  Easy queueing of alerts
  •  Custom alert behavior
Requirements
  • Xcode 7 or higher
  • iOS 8 or higher
If you want to use the library on iOS 7, please use version 2.5.4 (the latest 2.x release). SDCAlertView is not available on iOS 6.1 or below.
Installation
To install SDCAlertView using CocoaPods, please integrate it in your existing Podfile, or create a new Podfile:
platform:ios,'8.0'use_frameworks!target'MyApp'dopod'SDCAlertView','~> 3.0'end
Then run pod install.
Usage
SDCAlertView is written in Swift, but can be used in both Swift and Objective-C.
Basic
letalert=AlertController(title:"Title", message:"This is a message")
alert.addAction(AlertAction(title:"Cancel", style:.Default))
alert.addAction(AlertAction(title:"OK", style:.Preferred))
alert.present()
// or use the convenience method:
AlertController.showWithTitle("Title", message:"This is a message", actionTitle:"OK")
Custom Content Views
letspinner=UIActivityIndicatorView(activityIndicatorStyle:.Gray)
spinner.translatesAutoresizingMaskIntoConstraints =false
spinner.startAnimating()letalert=AlertController(title:"Title", message:"Please wait...")
alert.contentView.addSubview(spinner)
spinner.centerXAnchor.constraintEqualToAnchor(alert.contentView.centerXAnchor).active =true
spinner.topAnchor.constraintEqualToAnchor(alert.contentView.topAnchor).active =true
spinner.bottomAnchor.constraintEqualToAnchor(alert.contentView.bottomAnchor).active =true
alert.present()
Dismissal Prevention
letalert=AlertController(title:"Title", message:"This is a message")
alert.addAction(AlertAction(title:"Dismiss", style:.Preferred))
alert.addAction(AlertAction(title:"Don't dismiss", style:.Default))
alert.setShouldDismissHandler{ $0.title =="Dismiss"}
alert.present()
Styling and Appearance
SDCAlertController is a normal view controller, so applying a tintColor to its view will color the buttons and any subviews you add to the contentView.
If you are looking for more customizations, create a type that conforms to VisualStyle and use setVisualStyle() on the AlertController instance. You can also subclass DefaultVisualStyle for a set of default values that you can then override as needed.
Support
I'm pretty active on Stack Overflow, so please use that if you have any questions. You can also use Twitter to contact me directly.
If you are experiencing bugs, feel free to post an issue or submit a pull request. I don't bite, promise!
License
SDCAlertView is distributed under the MIT license.
About
The little alert that could
Resources
Readme
License
Activity
Custom properties
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Universal Dark Mode - works on any site\n(function() {\n var enabled = true;\n \n function applyDarkMode() {\n if (!enabled) return;\n \n // Create style element if it doesn't exist\n var style = document.getElementById('universal-dark-mode-style');\n if (!style) {\n style = document.createElement('style');\n style.id = 'universal-dark-mode-style';\n document.head.appendChild(style);\n }\n \n // Dark mode CSS - inverts colors but preserves images/video\n style.textContent = '\n /* Invert everything except media */\n html {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #1a1a2e !important;\n }\n \n /* Restore images, videos, iframes, canvas */\n img, video, iframe, canvas, svg, picture, [style*=\"background-image\"] {\n filter: invert(1) hue-rotate(180deg) !important;\n }\n \n /* Preserve specific elements that should not be inverted */\n .no-dark-mode, .no-dark-mode *,\n [data-theme=\"light\"], [data-theme=\"light\"],\n .ace_editor, .ace_editor *,\n .CodeMirror, .CodeMirror *,\n .monaco-editor, .monaco-editor *,\n .markdown-body pre, .markdown-body pre *,\n .highlight, .highlight *,\n pre code, pre code * {\n filter: none !important;\n }\n \n /* Fix common UI elements */\n .modal, .popup, .dropdown-menu, .tooltip, .popover {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #2d2d44 !important;\n border-color: #444 !important;\n }\n \n /* Scrollbars */\n ::-webkit-scrollbar { background: #1a1a2e !important; }\n ::-webkit-scrollbar-thumb { background: #444 !important; }\n ::-webkit-scrollbar-thumb:hover { background: #555 !important; }\n \n /* Selection */\n ::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ';\n }\n \n function removeDarkMode() {\n var style = document.getElementById('universal-dark-mode-style');\n if (style) style.remove();\n }\n \n // Toggle with Alt+Shift+D\n document.addEventListener('keydown', function(e) {\n if (e.altKey && e.shiftKey && e.key === 'D') {\n e.preventDefault();\n enabled = !enabled;\n if (enabled) {\n applyDarkMode();\n console.log('[Universal Dark Mode] Enabled');\n } else {\n removeDarkMode();\n console.log('[Universal Dark Mode] Disabled');\n }\n }\n });\n \n // Apply on load\n applyDarkMode();\n \n // Re-apply on dynamic content\n var observer = new MutationObserver(function(mutations) {\n if (enabled && !document.getElementById('universal-dark-mode-style')) {\n applyDarkMode();\n }\n });\n observer.observe(document.head, { childList: true });\n \n console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');\n})();", "Universal Dark Mode");
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content
BranchesTags
Repository files navigation
SDCAlertView
CI StatusCocoaPods
SDCAlertView started out as an alert that looked identical to UIAlertView, but had support for a custom content view. With the introduction of UIAlertController in iOS 8, the project was updated to the more modern API that UIAlertController brought.
Note: While UIAlertController supports the action sheet style alert (previously UIActionSheet), SDCAlertView/SDCAlertController do not support this.
Features
  •  Most UIAlertController functionality
  •  Custom content views
  •  Preventing an alert from dismissing when the user taps a button
  •  Easy presentation/dismissal
  •  Attributed title label, message label, and buttons
  •  Alert appearance customization
  •  Usable from Swift and Objective-C
  •  Understandable button placement
  •  UI tests
  •  Carthage support
  •  Easy queueing of alerts
  •  Custom alert behavior
Requirements
  • Xcode 7 or higher
  • iOS 8 or higher
If you want to use the library on iOS 7, please use version 2.5.4 (the latest 2.x release). SDCAlertView is not available on iOS 6.1 or below.
Installation
To install SDCAlertView using CocoaPods, please integrate it in your existing Podfile, or create a new Podfile:
platform:ios,'8.0'use_frameworks!target'MyApp'dopod'SDCAlertView','~> 3.0'end
Then run pod install.
Usage
SDCAlertView is written in Swift, but can be used in both Swift and Objective-C.
Basic
letalert=AlertController(title:"Title", message:"This is a message")
alert.addAction(AlertAction(title:"Cancel", style:.Default))
alert.addAction(AlertAction(title:"OK", style:.Preferred))
alert.present()
// or use the convenience method:
AlertController.showWithTitle("Title", message:"This is a message", actionTitle:"OK")
Custom Content Views
letspinner=UIActivityIndicatorView(activityIndicatorStyle:.Gray)
spinner.translatesAutoresizingMaskIntoConstraints =false
spinner.startAnimating()letalert=AlertController(title:"Title", message:"Please wait...")
alert.contentView.addSubview(spinner)
spinner.centerXAnchor.constraintEqualToAnchor(alert.contentView.centerXAnchor).active =true
spinner.topAnchor.constraintEqualToAnchor(alert.contentView.topAnchor).active =true
spinner.bottomAnchor.constraintEqualToAnchor(alert.contentView.bottomAnchor).active =true
alert.present()
Dismissal Prevention
letalert=AlertController(title:"Title", message:"This is a message")
alert.addAction(AlertAction(title:"Dismiss", style:.Preferred))
alert.addAction(AlertAction(title:"Don't dismiss", style:.Default))
alert.setShouldDismissHandler{ $0.title =="Dismiss"}
alert.present()
Styling and Appearance
SDCAlertController is a normal view controller, so applying a tintColor to its view will color the buttons and any subviews you add to the contentView.
If you are looking for more customizations, create a type that conforms to VisualStyle and use setVisualStyle() on the AlertController instance. You can also subclass DefaultVisualStyle for a set of default values that you can then override as needed.
Support
I'm pretty active on Stack Overflow, so please use that if you have any questions. You can also use Twitter to contact me directly.
If you are experiencing bugs, feel free to post an issue or submit a pull request. I don't bite, promise!
License
SDCAlertView is distributed under the MIT license.
About
The little alert that could
Resources
Readme
License
Activity
Custom properties
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages