BranchesTags

Repository files navigation

EmbeddedProto_Example_FRDM_CAN_Bootloader

Example in which Embedded Proto is used to do CAN net booting on a NXP FRDM-KE06Z

alt text

Embedded Proto is a product of Embedded AMS B.V. For more information about Embedded Proto please visit EmbeddedProto.com.

Copyrights 2020-2024 Embedded AMS B.V. Amsterdam, www.EmbeddedAMS.nl, info@EmbeddedAMS.nl

Introduction

This repository hosts example code for Embedded Proto, the embedded implementation of Google Protocol Buffers. This is an example showing how the NXP FRDM-KE06Z boots with firmware it receives from a CAN network.

Commands are sent from the PC to a USB to CAN converter which is connected to the FDRM-KE06Z.

You can read the full tutorial here.

Requirements

  • FDRM-KE06Z
  • MCUExpresso
  • USB to CAN adapter, like this one
  • Dupont cables
  • Embedded Proto version 3.4.1 (included as a submodule). The requirements of Embedded Proto are listed here.

Installation

  1. Install MCUXpresso if you have not already.
  2. Install the dependencies required by Embedded Proto. They are listed here.
  3. Clone the repository and auto generate the protobuf files.
git clone --recursive https://github.com/Embedded-AMS/EmbeddedProto_Example_FRDM_CAN_Bootloader.git cd EmbeddedProto_Example_FRDM_CAN_Bootloader
python3 setup.py

Running the code

  1. Connect the USB to CAN to the FDRM-KE06Z CAN header.
  2. Upload the code to the FRDM-KE06Z using MCUExpresso. The board includes the PE-Micro debugger.
  3. Run the following instructions
cd EmbeddedProto_Example_FRDM_CAN_Bootloader
source desktop/venv/bin/activate
python3 desktop/main.py desktop/assets/frdmke06z_led_blinky_RED.bin

Debug information will be shown in the terminal. After the booting is done the led will start blinking RED.

There is another example binary to make the led blink GREEN

python3 desktop/main.py desktop/assets/frdmke06z_led_blinky_RED.bin

Have fun!

Three simple things you can do to help improve Embedded Proto:

About

Example in which Embedded Proto is used to do CAN net booting on a NXP FRDM-KE06Z

Resources

Readme
Activity
Custom properties

Stars

0 stars

Watchers

0 watching

Forks

0 forks
Report repository

Releases

Packages

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { injectUserscript("// Add copy buttons to all 
 blocks\n(function() {\n function addCopyButtons() {\n document.querySelectorAll('pre code').forEach(function(codeBlock) {\n if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;\n codeBlock.parentElement.setAttribute('data-copy-added', 'true');\n \n var btn = document.createElement('button');\n btn.textContent = 'Copy';\n btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';\n btn.onmouseover = function() { this.style.opacity = '1'; };\n btn.onmouseout = function() { this.style.opacity = '0.7'; };\n btn.onclick = function() {\n navigator.clipboard.writeText(codeBlock.textContent).then(function() {\n btn.textContent = 'Copied!';\n setTimeout(function() { btn.textContent = 'Copy'; }, 1500);\n });\n };\n codeBlock.parentElement.style.position = 'relative';\n codeBlock.parentElement.appendChild(btn);\n });\n }\n \n addCopyButtons();\n \n // Re-run on dynamic content\n var observer = new MutationObserver(addCopyButtons);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Add Copy Buttons to Code Blocks");
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content
BranchesTags
Repository files navigation
EmbeddedProto_Example_FRDM_CAN_Bootloader
Example in which Embedded Proto is used to do CAN net booting on a NXP FRDM-KE06Z
alt text
Embedded Proto is a product of Embedded AMS B.V. For more information about Embedded Proto please visit EmbeddedProto.com.
Copyrights 2020-2024 Embedded AMS B.V. Amsterdam, www.EmbeddedAMS.nl, info@EmbeddedAMS.nl
Introduction
This repository hosts example code for Embedded Proto, the embedded implementation of Google Protocol Buffers.
This is an example showing how the NXP FRDM-KE06Z boots with firmware it receives from a CAN network.
Commands are sent from the PC to a USB to CAN converter which is connected to the FDRM-KE06Z.
You can read the full tutorial here.
Requirements
  • FDRM-KE06Z
  • MCUExpresso
  • USB to CAN adapter, like this one
  • Dupont cables
  • Embedded Proto version 3.4.1 (included as a submodule). The requirements of Embedded Proto are listed here.
Installation
  1. Install MCUXpresso if you have not already.
  2. Install the dependencies required by Embedded Proto. They are listed here.
  3. Clone the repository and auto generate the protobuf files.
git clone --recursive https://github.com/Embedded-AMS/EmbeddedProto_Example_FRDM_CAN_Bootloader.git cd EmbeddedProto_Example_FRDM_CAN_Bootloader
python3 setup.py
Running the code
  1. Connect the USB to CAN to the FDRM-KE06Z CAN header.
  2. Upload the code to the FRDM-KE06Z using MCUExpresso. The board includes the PE-Micro debugger.
  3. Run the following instructions
cd EmbeddedProto_Example_FRDM_CAN_Bootloader
source desktop/venv/bin/activate
python3 desktop/main.py desktop/assets/frdmke06z_led_blinky_RED.bin
Debug information will be shown in the terminal. After the booting is done the led will start blinking RED.
There is another example binary to make the led blink GREEN
python3 desktop/main.py desktop/assets/frdmke06z_led_blinky_RED.bin
Have fun!
Three simple things you can do to help improve Embedded Proto:
About
Example in which Embedded Proto is used to do CAN net booting on a NXP FRDM-KE06Z
Resources
Readme
Activity
Custom properties
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Force GitHub README to respect dark mode\n(function() {\n var style = document.createElement('style');\n style.textContent = '\n .markdown-body {\n color-scheme: dark light;\n }\n .markdown-body pre { background: #161b22 !important; }\n .markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }\n .markdown-body table th, .markdown-body table td { border-color: #30363d !important; }\n .markdown-body img { background: #0d1117; }\n .markdown-body blockquote { border-left-color: #8b949e; }\n .markdown-body hr { border-color: #30363d; }\n ';\n document.head.appendChild(style);\n})();", "GitHub Dark Mode README Fix");
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
EmbeddedProto_Example_FRDM_CAN_Bootloader
Example in which Embedded Proto is used to do CAN net booting on a NXP FRDM-KE06Z
alt text
Embedded Proto is a product of Embedded AMS B.V. For more information about Embedded Proto please visit EmbeddedProto.com.
Copyrights 2020-2024 Embedded AMS B.V. Amsterdam, www.EmbeddedAMS.nl, info@EmbeddedAMS.nl
Introduction
This repository hosts example code for Embedded Proto, the embedded implementation of Google Protocol Buffers.
This is an example showing how the NXP FRDM-KE06Z boots with firmware it receives from a CAN network.
Commands are sent from the PC to a USB to CAN converter which is connected to the FDRM-KE06Z.
You can read the full tutorial here.
Requirements
  • FDRM-KE06Z
  • MCUExpresso
  • USB to CAN adapter, like this one
  • Dupont cables
  • Embedded Proto version 3.4.1 (included as a submodule). The requirements of Embedded Proto are listed here.
Installation
  1. Install MCUXpresso if you have not already.
  2. Install the dependencies required by Embedded Proto. They are listed here.
  3. Clone the repository and auto generate the protobuf files.
git clone --recursive https://github.com/Embedded-AMS/EmbeddedProto_Example_FRDM_CAN_Bootloader.git cd EmbeddedProto_Example_FRDM_CAN_Bootloader
python3 setup.py
Running the code
  1. Connect the USB to CAN to the FDRM-KE06Z CAN header.
  2. Upload the code to the FRDM-KE06Z using MCUExpresso. The board includes the PE-Micro debugger.
  3. Run the following instructions
cd EmbeddedProto_Example_FRDM_CAN_Bootloader
source desktop/venv/bin/activate
python3 desktop/main.py desktop/assets/frdmke06z_led_blinky_RED.bin
Debug information will be shown in the terminal. After the booting is done the led will start blinking RED.
There is another example binary to make the led blink GREEN
python3 desktop/main.py desktop/assets/frdmke06z_led_blinky_RED.bin
Have fun!
Three simple things you can do to help improve Embedded Proto:
About
Example in which Embedded Proto is used to do CAN net booting on a NXP FRDM-KE06Z
Resources
Readme
Activity
Custom properties
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Highlight search terms from Google/DuckDuckGo/Bing referrer\n(function() {\n var ref = document.referrer;\n var terms = [];\n \n if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {\n var url = new URL(ref);\n var q = url.searchParams.get('q') || url.searchParams.get('p');\n if (q) {\n terms = q.split(/\\s+/).filter(function(t) { return t.length > 2; });\n }\n }\n \n if (terms.length === 0) return;\n \n var style = document.createElement('style');\n style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';\n document.head.appendChild(style);\n \n function highlight(node) {\n if (node.nodeType === 3) { // text node\n var text = node.textContent;\n var found = false;\n terms.forEach(function(term) {\n var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\\]\\\\]/g, '\\\\') + ')', 'gi');\n if (regex.test(text)) {\n found = true;\n var frag = document.createDocumentFragment();\n var parts = text.split(regex);\n parts.forEach(function(part, i) {\n if (i % 2 === 0) {\n frag.appendChild(document.createTextNode(part));\n } else {\n var span = document.createElement('span');\n span.className = 'userscript-highlight';\n span.textContent = part;\n frag.appendChild(span);\n }\n });\n node.parentNode.replaceChild(frag, node);\n }\n });\n } else if (node.nodeType === 1 && node.childNodes) { // element\n var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];\n if (!skipTags.includes(node.tagName)) {\n Array.from(node.childNodes).forEach(highlight);\n }\n }\n }\n \n highlight(document.body);\n \n // Re-highlight on dynamic content\n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1 || node.nodeType === 3) highlight(node);\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Highlight Search Terms");
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
EmbeddedProto_Example_FRDM_CAN_Bootloader
Example in which Embedded Proto is used to do CAN net booting on a NXP FRDM-KE06Z
alt text
Embedded Proto is a product of Embedded AMS B.V. For more information about Embedded Proto please visit EmbeddedProto.com.
Copyrights 2020-2024 Embedded AMS B.V. Amsterdam, www.EmbeddedAMS.nl, info@EmbeddedAMS.nl
Introduction
This repository hosts example code for Embedded Proto, the embedded implementation of Google Protocol Buffers.
This is an example showing how the NXP FRDM-KE06Z boots with firmware it receives from a CAN network.
Commands are sent from the PC to a USB to CAN converter which is connected to the FDRM-KE06Z.
You can read the full tutorial here.
Requirements
  • FDRM-KE06Z
  • MCUExpresso
  • USB to CAN adapter, like this one
  • Dupont cables
  • Embedded Proto version 3.4.1 (included as a submodule). The requirements of Embedded Proto are listed here.
Installation
  1. Install MCUXpresso if you have not already.
  2. Install the dependencies required by Embedded Proto. They are listed here.
  3. Clone the repository and auto generate the protobuf files.
git clone --recursive https://github.com/Embedded-AMS/EmbeddedProto_Example_FRDM_CAN_Bootloader.git cd EmbeddedProto_Example_FRDM_CAN_Bootloader
python3 setup.py
Running the code
  1. Connect the USB to CAN to the FDRM-KE06Z CAN header.
  2. Upload the code to the FRDM-KE06Z using MCUExpresso. The board includes the PE-Micro debugger.
  3. Run the following instructions
cd EmbeddedProto_Example_FRDM_CAN_Bootloader
source desktop/venv/bin/activate
python3 desktop/main.py desktop/assets/frdmke06z_led_blinky_RED.bin
Debug information will be shown in the terminal. After the booting is done the led will start blinking RED.
There is another example binary to make the led blink GREEN
python3 desktop/main.py desktop/assets/frdmke06z_led_blinky_RED.bin
Have fun!
Three simple things you can do to help improve Embedded Proto:
About
Example in which Embedded Proto is used to do CAN net booting on a NXP FRDM-KE06Z
Resources
Readme
Activity
Custom properties
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Strip utm_, fbclid, gclid, etc. from all links on page\n(function() {\n var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',\n 'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',\n 'ref', 'ref_src', 'source', 'medium', 'campaign'];\n \n function cleanUrl(url) {\n try {\n var u = new URL(url, window.location.origin);\n var changed = false;\n trackingParams.forEach(function(p) {\n if (u.searchParams.has(p)) {\n u.searchParams.delete(p);\n changed = true;\n }\n });\n return changed ? u.toString() : url;\n } catch (e) {\n return url;\n }\n }\n \n function cleanLinks() {\n document.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n \n cleanLinks();\n \n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1) {\n if (node.tagName === 'A') cleanLinks();\n node.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Remove Tracking Parameters from Links");
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content
BranchesTags
Repository files navigation
EmbeddedProto_Example_FRDM_CAN_Bootloader
Example in which Embedded Proto is used to do CAN net booting on a NXP FRDM-KE06Z
alt text
Embedded Proto is a product of Embedded AMS B.V. For more information about Embedded Proto please visit EmbeddedProto.com.
Copyrights 2020-2024 Embedded AMS B.V. Amsterdam, www.EmbeddedAMS.nl, info@EmbeddedAMS.nl
Introduction
This repository hosts example code for Embedded Proto, the embedded implementation of Google Protocol Buffers.
This is an example showing how the NXP FRDM-KE06Z boots with firmware it receives from a CAN network.
Commands are sent from the PC to a USB to CAN converter which is connected to the FDRM-KE06Z.
You can read the full tutorial here.
Requirements
  • FDRM-KE06Z
  • MCUExpresso
  • USB to CAN adapter, like this one
  • Dupont cables
  • Embedded Proto version 3.4.1 (included as a submodule). The requirements of Embedded Proto are listed here.
Installation
  1. Install MCUXpresso if you have not already.
  2. Install the dependencies required by Embedded Proto. They are listed here.
  3. Clone the repository and auto generate the protobuf files.
git clone --recursive https://github.com/Embedded-AMS/EmbeddedProto_Example_FRDM_CAN_Bootloader.git cd EmbeddedProto_Example_FRDM_CAN_Bootloader
python3 setup.py
Running the code
  1. Connect the USB to CAN to the FDRM-KE06Z CAN header.
  2. Upload the code to the FRDM-KE06Z using MCUExpresso. The board includes the PE-Micro debugger.
  3. Run the following instructions
cd EmbeddedProto_Example_FRDM_CAN_Bootloader
source desktop/venv/bin/activate
python3 desktop/main.py desktop/assets/frdmke06z_led_blinky_RED.bin
Debug information will be shown in the terminal. After the booting is done the led will start blinking RED.
There is another example binary to make the led blink GREEN
python3 desktop/main.py desktop/assets/frdmke06z_led_blinky_RED.bin
Have fun!
Three simple things you can do to help improve Embedded Proto:
About
Example in which Embedded Proto is used to do CAN net booting on a NXP FRDM-KE06Z
Resources
Readme
Activity
Custom properties
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Auto-enable theater mode on YouTube\n(function() {\n function tryTheater() {\n var btn = document.querySelector('button[aria-label=\"Theater mode\"], ytd-player #player button[title=\"Theater mode\"]');\n if (btn && !btn.classList.contains('activated')) {\n btn.click();\n }\n }\n \n // Try immediately\n tryTheater();\n \n // Try after navigation (SPA)\n var lastUrl = location.href;\n setInterval(function() {\n if (location.href !== lastUrl) {\n lastUrl = location.href;\n setTimeout(tryTheater, 500);\n }\n }, 1000);\n \n // Also try on player load\n var observer = new MutationObserver(tryTheater);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "YouTube Theater Mode Default");
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
EmbeddedProto_Example_FRDM_CAN_Bootloader
Example in which Embedded Proto is used to do CAN net booting on a NXP FRDM-KE06Z
alt text
Embedded Proto is a product of Embedded AMS B.V. For more information about Embedded Proto please visit EmbeddedProto.com.
Copyrights 2020-2024 Embedded AMS B.V. Amsterdam, www.EmbeddedAMS.nl, info@EmbeddedAMS.nl
Introduction
This repository hosts example code for Embedded Proto, the embedded implementation of Google Protocol Buffers.
This is an example showing how the NXP FRDM-KE06Z boots with firmware it receives from a CAN network.
Commands are sent from the PC to a USB to CAN converter which is connected to the FDRM-KE06Z.
You can read the full tutorial here.
Requirements
  • FDRM-KE06Z
  • MCUExpresso
  • USB to CAN adapter, like this one
  • Dupont cables
  • Embedded Proto version 3.4.1 (included as a submodule). The requirements of Embedded Proto are listed here.
Installation
  1. Install MCUXpresso if you have not already.
  2. Install the dependencies required by Embedded Proto. They are listed here.
  3. Clone the repository and auto generate the protobuf files.
git clone --recursive https://github.com/Embedded-AMS/EmbeddedProto_Example_FRDM_CAN_Bootloader.git cd EmbeddedProto_Example_FRDM_CAN_Bootloader
python3 setup.py
Running the code
  1. Connect the USB to CAN to the FDRM-KE06Z CAN header.
  2. Upload the code to the FRDM-KE06Z using MCUExpresso. The board includes the PE-Micro debugger.
  3. Run the following instructions
cd EmbeddedProto_Example_FRDM_CAN_Bootloader
source desktop/venv/bin/activate
python3 desktop/main.py desktop/assets/frdmke06z_led_blinky_RED.bin
Debug information will be shown in the terminal. After the booting is done the led will start blinking RED.
There is another example binary to make the led blink GREEN
python3 desktop/main.py desktop/assets/frdmke06z_led_blinky_RED.bin
Have fun!
Three simple things you can do to help improve Embedded Proto:
About
Example in which Embedded Proto is used to do CAN net booting on a NXP FRDM-KE06Z
Resources
Readme
Activity
Custom properties
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Remove or un-stick sticky/fixed headers that block content\n(function() {\n function unstick() {\n document.querySelectorAll('header, nav, [role=\"banner\"], .header, .navbar, .sticky, .fixed-top, [style*=\"position: fixed\"], [style*=\"position:sticky\"]').forEach(function(el) {\n if (el.style.position === 'fixed' || el.style.position === 'sticky' || \n getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {\n el.style.position = 'static';\n el.style.top = 'auto';\n el.style.zIndex = 'auto';\n }\n });\n }\n \n unstick();\n \n var observer = new MutationObserver(unstick);\n observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });\n})();", "Kill Sticky Headers");
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
EmbeddedProto_Example_FRDM_CAN_Bootloader
Example in which Embedded Proto is used to do CAN net booting on a NXP FRDM-KE06Z
alt text
Embedded Proto is a product of Embedded AMS B.V. For more information about Embedded Proto please visit EmbeddedProto.com.
Copyrights 2020-2024 Embedded AMS B.V. Amsterdam, www.EmbeddedAMS.nl, info@EmbeddedAMS.nl
Introduction
This repository hosts example code for Embedded Proto, the embedded implementation of Google Protocol Buffers.
This is an example showing how the NXP FRDM-KE06Z boots with firmware it receives from a CAN network.
Commands are sent from the PC to a USB to CAN converter which is connected to the FDRM-KE06Z.
You can read the full tutorial here.
Requirements
  • FDRM-KE06Z
  • MCUExpresso
  • USB to CAN adapter, like this one
  • Dupont cables
  • Embedded Proto version 3.4.1 (included as a submodule). The requirements of Embedded Proto are listed here.
Installation
  1. Install MCUXpresso if you have not already.
  2. Install the dependencies required by Embedded Proto. They are listed here.
  3. Clone the repository and auto generate the protobuf files.
git clone --recursive https://github.com/Embedded-AMS/EmbeddedProto_Example_FRDM_CAN_Bootloader.git cd EmbeddedProto_Example_FRDM_CAN_Bootloader
python3 setup.py
Running the code
  1. Connect the USB to CAN to the FDRM-KE06Z CAN header.
  2. Upload the code to the FRDM-KE06Z using MCUExpresso. The board includes the PE-Micro debugger.
  3. Run the following instructions
cd EmbeddedProto_Example_FRDM_CAN_Bootloader
source desktop/venv/bin/activate
python3 desktop/main.py desktop/assets/frdmke06z_led_blinky_RED.bin
Debug information will be shown in the terminal. After the booting is done the led will start blinking RED.
There is another example binary to make the led blink GREEN
python3 desktop/main.py desktop/assets/frdmke06z_led_blinky_RED.bin
Have fun!
Three simple things you can do to help improve Embedded Proto:
About
Example in which Embedded Proto is used to do CAN net booting on a NXP FRDM-KE06Z
Resources
Readme
Activity
Custom properties
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Universal Dark Mode - works on any site\n(function() {\n var enabled = true;\n \n function applyDarkMode() {\n if (!enabled) return;\n \n // Create style element if it doesn't exist\n var style = document.getElementById('universal-dark-mode-style');\n if (!style) {\n style = document.createElement('style');\n style.id = 'universal-dark-mode-style';\n document.head.appendChild(style);\n }\n \n // Dark mode CSS - inverts colors but preserves images/video\n style.textContent = '\n /* Invert everything except media */\n html {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #1a1a2e !important;\n }\n \n /* Restore images, videos, iframes, canvas */\n img, video, iframe, canvas, svg, picture, [style*=\"background-image\"] {\n filter: invert(1) hue-rotate(180deg) !important;\n }\n \n /* Preserve specific elements that should not be inverted */\n .no-dark-mode, .no-dark-mode *,\n [data-theme=\"light\"], [data-theme=\"light\"],\n .ace_editor, .ace_editor *,\n .CodeMirror, .CodeMirror *,\n .monaco-editor, .monaco-editor *,\n .markdown-body pre, .markdown-body pre *,\n .highlight, .highlight *,\n pre code, pre code * {\n filter: none !important;\n }\n \n /* Fix common UI elements */\n .modal, .popup, .dropdown-menu, .tooltip, .popover {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #2d2d44 !important;\n border-color: #444 !important;\n }\n \n /* Scrollbars */\n ::-webkit-scrollbar { background: #1a1a2e !important; }\n ::-webkit-scrollbar-thumb { background: #444 !important; }\n ::-webkit-scrollbar-thumb:hover { background: #555 !important; }\n \n /* Selection */\n ::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ';\n }\n \n function removeDarkMode() {\n var style = document.getElementById('universal-dark-mode-style');\n if (style) style.remove();\n }\n \n // Toggle with Alt+Shift+D\n document.addEventListener('keydown', function(e) {\n if (e.altKey && e.shiftKey && e.key === 'D') {\n e.preventDefault();\n enabled = !enabled;\n if (enabled) {\n applyDarkMode();\n console.log('[Universal Dark Mode] Enabled');\n } else {\n removeDarkMode();\n console.log('[Universal Dark Mode] Disabled');\n }\n }\n });\n \n // Apply on load\n applyDarkMode();\n \n // Re-apply on dynamic content\n var observer = new MutationObserver(function(mutations) {\n if (enabled && !document.getElementById('universal-dark-mode-style')) {\n applyDarkMode();\n }\n });\n observer.observe(document.head, { childList: true });\n \n console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');\n})();", "Universal Dark Mode");
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content
BranchesTags
Repository files navigation
EmbeddedProto_Example_FRDM_CAN_Bootloader
Example in which Embedded Proto is used to do CAN net booting on a NXP FRDM-KE06Z
alt text
Embedded Proto is a product of Embedded AMS B.V. For more information about Embedded Proto please visit EmbeddedProto.com.
Copyrights 2020-2024 Embedded AMS B.V. Amsterdam, www.EmbeddedAMS.nl, info@EmbeddedAMS.nl
Introduction
This repository hosts example code for Embedded Proto, the embedded implementation of Google Protocol Buffers.
This is an example showing how the NXP FRDM-KE06Z boots with firmware it receives from a CAN network.
Commands are sent from the PC to a USB to CAN converter which is connected to the FDRM-KE06Z.
You can read the full tutorial here.
Requirements
  • FDRM-KE06Z
  • MCUExpresso
  • USB to CAN adapter, like this one
  • Dupont cables
  • Embedded Proto version 3.4.1 (included as a submodule). The requirements of Embedded Proto are listed here.
Installation
  1. Install MCUXpresso if you have not already.
  2. Install the dependencies required by Embedded Proto. They are listed here.
  3. Clone the repository and auto generate the protobuf files.
git clone --recursive https://github.com/Embedded-AMS/EmbeddedProto_Example_FRDM_CAN_Bootloader.git cd EmbeddedProto_Example_FRDM_CAN_Bootloader
python3 setup.py
Running the code
  1. Connect the USB to CAN to the FDRM-KE06Z CAN header.
  2. Upload the code to the FRDM-KE06Z using MCUExpresso. The board includes the PE-Micro debugger.
  3. Run the following instructions
cd EmbeddedProto_Example_FRDM_CAN_Bootloader
source desktop/venv/bin/activate
python3 desktop/main.py desktop/assets/frdmke06z_led_blinky_RED.bin
Debug information will be shown in the terminal. After the booting is done the led will start blinking RED.
There is another example binary to make the led blink GREEN
python3 desktop/main.py desktop/assets/frdmke06z_led_blinky_RED.bin
Have fun!
Three simple things you can do to help improve Embedded Proto:
About
Example in which Embedded Proto is used to do CAN net booting on a NXP FRDM-KE06Z
Resources
Readme
Activity
Custom properties
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages