BranchesTags

Repository files navigation

GTHC - Game Tenting Help Center

Logo

README

Table of Context

  1. Installation
  2. Setup
  3. Configuration

Installation

  1. Install Docker and docker-compose. Please follow the instructions on how to do so in the links below.

    a. Docker

    b. docker-compose

  2. Install Ruby and Ruby on Rails.

    a. One of the easiest ways to do this: http://installrails.com

  3. Install Node.js. Please follow instructions on how to do so in the links below.

    a. Node.js

  4. Install PostgreSQL. Please follow instructions on how to do so in the links below.

    a. PostgreSQL

  5. Make sure you the yarn package manager installed by running: npm i -g yarn

    a. yarn is a great alternative to npm as a dependency manager for Node.js. Read more here.

Setup

Disclaimer: Windows users, it is highly recommended that the entire setup process should be done through the Windows Subsystem for Linux (WSL). Setting up WSL can be found here.

Pre-req: As mentioned in configuration, you must recieve the .env file from GTHC project leaders before beginning setup process.

  1. Install all packages/dependancies.

    a. Run bundle install

    b. Run yarn install

  2. yarn run setup

    a. This yarn script should run all of the necessary shell scripts to setup your Docker containers, bundle (ruby gems) dependencies, and your node dependencies.

  3. yarn dev:start

    a. This will start a local developer server, by default that will be on port 5000. (http://localhost:5000)

    b. Always run this command from here on out to start the local server.

Local Software Versioning

It is required that your system is running Rails 5.0+ for the local development to function properly. It is recommended to use the most recent version of Node, but anything above Node 8.x shall work.

Configuration

Important: There are private environment variables needed for certain aspects of the application. Therefore, it will be required that you have a .env file in the root of your project before running anything. Please contact the project leaders (Aman or Anesu) for this information. Finally, the .env file should not be pushed to github under no circumstances!

About

Tool to make tenting in K-Ville easier ⛺

www.gthc.io

Topics

dockerrailsreact

Resources

Readme
MIT license
Activity
Custom properties

Stars

2 stars

Watchers

1 watching

Forks

0 forks
Report repository

Releases

Packages

Used by

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { injectUserscript("// Add copy buttons to all 
 blocks\n(function() {\n function addCopyButtons() {\n document.querySelectorAll('pre code').forEach(function(codeBlock) {\n if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;\n codeBlock.parentElement.setAttribute('data-copy-added', 'true');\n \n var btn = document.createElement('button');\n btn.textContent = 'Copy';\n btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';\n btn.onmouseover = function() { this.style.opacity = '1'; };\n btn.onmouseout = function() { this.style.opacity = '0.7'; };\n btn.onclick = function() {\n navigator.clipboard.writeText(codeBlock.textContent).then(function() {\n btn.textContent = 'Copied!';\n setTimeout(function() { btn.textContent = 'Copy'; }, 1500);\n });\n };\n codeBlock.parentElement.style.position = 'relative';\n codeBlock.parentElement.appendChild(btn);\n });\n }\n \n addCopyButtons();\n \n // Re-run on dynamic content\n var observer = new MutationObserver(addCopyButtons);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Add Copy Buttons to Code Blocks");
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content
BranchesTags
Repository files navigation
GTHC - Game Tenting Help Center
Logo
README
Table of Context
  1. Installation
  2. Setup
  3. Configuration
Installation
  1. Install Docker and docker-compose. Please follow the instructions on how to do so in the links below.
    a. Docker
    b. docker-compose
  2. Install Ruby and Ruby on Rails.
    a. One of the easiest ways to do this: http://installrails.com
  3. Install Node.js. Please follow instructions on how to do so in the links below.
    a. Node.js
  4. Install PostgreSQL. Please follow instructions on how to do so in the links below.
    a. PostgreSQL
  5. Make sure you the yarn package manager installed by running: npm i -g yarn
    a. yarn is a great alternative to npm as a dependency manager for Node.js. Read more here.
Setup
Disclaimer: Windows users, it is highly recommended that the entire setup process should be done through the Windows Subsystem for Linux (WSL). Setting up WSL can be found here.
Pre-req: As mentioned in configuration, you must recieve the .env file from GTHC project leaders before beginning setup process.
  1. Install all packages/dependancies.
    a. Run bundle install
    b. Run yarn install
  2. yarn run setup
    a. This yarn script should run all of the necessary shell scripts to setup your Docker containers, bundle (ruby gems) dependencies, and your node dependencies.
  3. yarn dev:start
    a. This will start a local developer server, by default that will be on port 5000. (http://localhost:5000)
    b. Always run this command from here on out to start the local server.
Local Software Versioning
It is required that your system is running Rails 5.0+ for the local development to function properly. It is recommended to use the most recent version of Node, but anything above Node 8.x shall work.
Configuration
Important: There are private environment variables needed for certain aspects of the application. Therefore, it will be required that you have a .env file in the root of your project before running anything. Please contact the project leaders (Aman or Anesu) for this information. Finally, the .env file should not be pushed to github under no circumstances!
About
Tool to make tenting in K-Ville easier ⛺
www.gthc.io
Topics
dockerrailsreact
Resources
Readme
MIT license
Activity
Custom properties
Stars
2 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Force GitHub README to respect dark mode\n(function() {\n var style = document.createElement('style');\n style.textContent = '\n .markdown-body {\n color-scheme: dark light;\n }\n .markdown-body pre { background: #161b22 !important; }\n .markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }\n .markdown-body table th, .markdown-body table td { border-color: #30363d !important; }\n .markdown-body img { background: #0d1117; }\n .markdown-body blockquote { border-left-color: #8b949e; }\n .markdown-body hr { border-color: #30363d; }\n ';\n document.head.appendChild(style);\n})();", "GitHub Dark Mode README Fix");
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
GTHC - Game Tenting Help Center
Logo
README
Table of Context
  1. Installation
  2. Setup
  3. Configuration
Installation
  1. Install Docker and docker-compose. Please follow the instructions on how to do so in the links below.
    a. Docker
    b. docker-compose
  2. Install Ruby and Ruby on Rails.
    a. One of the easiest ways to do this: http://installrails.com
  3. Install Node.js. Please follow instructions on how to do so in the links below.
    a. Node.js
  4. Install PostgreSQL. Please follow instructions on how to do so in the links below.
    a. PostgreSQL
  5. Make sure you the yarn package manager installed by running: npm i -g yarn
    a. yarn is a great alternative to npm as a dependency manager for Node.js. Read more here.
Setup
Disclaimer: Windows users, it is highly recommended that the entire setup process should be done through the Windows Subsystem for Linux (WSL). Setting up WSL can be found here.
Pre-req: As mentioned in configuration, you must recieve the .env file from GTHC project leaders before beginning setup process.
  1. Install all packages/dependancies.
    a. Run bundle install
    b. Run yarn install
  2. yarn run setup
    a. This yarn script should run all of the necessary shell scripts to setup your Docker containers, bundle (ruby gems) dependencies, and your node dependencies.
  3. yarn dev:start
    a. This will start a local developer server, by default that will be on port 5000. (http://localhost:5000)
    b. Always run this command from here on out to start the local server.
Local Software Versioning
It is required that your system is running Rails 5.0+ for the local development to function properly. It is recommended to use the most recent version of Node, but anything above Node 8.x shall work.
Configuration
Important: There are private environment variables needed for certain aspects of the application. Therefore, it will be required that you have a .env file in the root of your project before running anything. Please contact the project leaders (Aman or Anesu) for this information. Finally, the .env file should not be pushed to github under no circumstances!
About
Tool to make tenting in K-Ville easier ⛺
www.gthc.io
Topics
dockerrailsreact
Resources
Readme
MIT license
Activity
Custom properties
Stars
2 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Highlight search terms from Google/DuckDuckGo/Bing referrer\n(function() {\n var ref = document.referrer;\n var terms = [];\n \n if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {\n var url = new URL(ref);\n var q = url.searchParams.get('q') || url.searchParams.get('p');\n if (q) {\n terms = q.split(/\\s+/).filter(function(t) { return t.length > 2; });\n }\n }\n \n if (terms.length === 0) return;\n \n var style = document.createElement('style');\n style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';\n document.head.appendChild(style);\n \n function highlight(node) {\n if (node.nodeType === 3) { // text node\n var text = node.textContent;\n var found = false;\n terms.forEach(function(term) {\n var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\\]\\\\]/g, '\\\\') + ')', 'gi');\n if (regex.test(text)) {\n found = true;\n var frag = document.createDocumentFragment();\n var parts = text.split(regex);\n parts.forEach(function(part, i) {\n if (i % 2 === 0) {\n frag.appendChild(document.createTextNode(part));\n } else {\n var span = document.createElement('span');\n span.className = 'userscript-highlight';\n span.textContent = part;\n frag.appendChild(span);\n }\n });\n node.parentNode.replaceChild(frag, node);\n }\n });\n } else if (node.nodeType === 1 && node.childNodes) { // element\n var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];\n if (!skipTags.includes(node.tagName)) {\n Array.from(node.childNodes).forEach(highlight);\n }\n }\n }\n \n highlight(document.body);\n \n // Re-highlight on dynamic content\n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1 || node.nodeType === 3) highlight(node);\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Highlight Search Terms");
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
GTHC - Game Tenting Help Center
Logo
README
Table of Context
  1. Installation
  2. Setup
  3. Configuration
Installation
  1. Install Docker and docker-compose. Please follow the instructions on how to do so in the links below.
    a. Docker
    b. docker-compose
  2. Install Ruby and Ruby on Rails.
    a. One of the easiest ways to do this: http://installrails.com
  3. Install Node.js. Please follow instructions on how to do so in the links below.
    a. Node.js
  4. Install PostgreSQL. Please follow instructions on how to do so in the links below.
    a. PostgreSQL
  5. Make sure you the yarn package manager installed by running: npm i -g yarn
    a. yarn is a great alternative to npm as a dependency manager for Node.js. Read more here.
Setup
Disclaimer: Windows users, it is highly recommended that the entire setup process should be done through the Windows Subsystem for Linux (WSL). Setting up WSL can be found here.
Pre-req: As mentioned in configuration, you must recieve the .env file from GTHC project leaders before beginning setup process.
  1. Install all packages/dependancies.
    a. Run bundle install
    b. Run yarn install
  2. yarn run setup
    a. This yarn script should run all of the necessary shell scripts to setup your Docker containers, bundle (ruby gems) dependencies, and your node dependencies.
  3. yarn dev:start
    a. This will start a local developer server, by default that will be on port 5000. (http://localhost:5000)
    b. Always run this command from here on out to start the local server.
Local Software Versioning
It is required that your system is running Rails 5.0+ for the local development to function properly. It is recommended to use the most recent version of Node, but anything above Node 8.x shall work.
Configuration
Important: There are private environment variables needed for certain aspects of the application. Therefore, it will be required that you have a .env file in the root of your project before running anything. Please contact the project leaders (Aman or Anesu) for this information. Finally, the .env file should not be pushed to github under no circumstances!
About
Tool to make tenting in K-Ville easier ⛺
www.gthc.io
Topics
dockerrailsreact
Resources
Readme
MIT license
Activity
Custom properties
Stars
2 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Strip utm_, fbclid, gclid, etc. from all links on page\n(function() {\n var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',\n 'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',\n 'ref', 'ref_src', 'source', 'medium', 'campaign'];\n \n function cleanUrl(url) {\n try {\n var u = new URL(url, window.location.origin);\n var changed = false;\n trackingParams.forEach(function(p) {\n if (u.searchParams.has(p)) {\n u.searchParams.delete(p);\n changed = true;\n }\n });\n return changed ? u.toString() : url;\n } catch (e) {\n return url;\n }\n }\n \n function cleanLinks() {\n document.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n \n cleanLinks();\n \n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1) {\n if (node.tagName === 'A') cleanLinks();\n node.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Remove Tracking Parameters from Links");
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content
BranchesTags
Repository files navigation
GTHC - Game Tenting Help Center
Logo
README
Table of Context
  1. Installation
  2. Setup
  3. Configuration
Installation
  1. Install Docker and docker-compose. Please follow the instructions on how to do so in the links below.
    a. Docker
    b. docker-compose
  2. Install Ruby and Ruby on Rails.
    a. One of the easiest ways to do this: http://installrails.com
  3. Install Node.js. Please follow instructions on how to do so in the links below.
    a. Node.js
  4. Install PostgreSQL. Please follow instructions on how to do so in the links below.
    a. PostgreSQL
  5. Make sure you the yarn package manager installed by running: npm i -g yarn
    a. yarn is a great alternative to npm as a dependency manager for Node.js. Read more here.
Setup
Disclaimer: Windows users, it is highly recommended that the entire setup process should be done through the Windows Subsystem for Linux (WSL). Setting up WSL can be found here.
Pre-req: As mentioned in configuration, you must recieve the .env file from GTHC project leaders before beginning setup process.
  1. Install all packages/dependancies.
    a. Run bundle install
    b. Run yarn install
  2. yarn run setup
    a. This yarn script should run all of the necessary shell scripts to setup your Docker containers, bundle (ruby gems) dependencies, and your node dependencies.
  3. yarn dev:start
    a. This will start a local developer server, by default that will be on port 5000. (http://localhost:5000)
    b. Always run this command from here on out to start the local server.
Local Software Versioning
It is required that your system is running Rails 5.0+ for the local development to function properly. It is recommended to use the most recent version of Node, but anything above Node 8.x shall work.
Configuration
Important: There are private environment variables needed for certain aspects of the application. Therefore, it will be required that you have a .env file in the root of your project before running anything. Please contact the project leaders (Aman or Anesu) for this information. Finally, the .env file should not be pushed to github under no circumstances!
About
Tool to make tenting in K-Ville easier ⛺
www.gthc.io
Topics
dockerrailsreact
Resources
Readme
MIT license
Activity
Custom properties
Stars
2 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Auto-enable theater mode on YouTube\n(function() {\n function tryTheater() {\n var btn = document.querySelector('button[aria-label=\"Theater mode\"], ytd-player #player button[title=\"Theater mode\"]');\n if (btn && !btn.classList.contains('activated')) {\n btn.click();\n }\n }\n \n // Try immediately\n tryTheater();\n \n // Try after navigation (SPA)\n var lastUrl = location.href;\n setInterval(function() {\n if (location.href !== lastUrl) {\n lastUrl = location.href;\n setTimeout(tryTheater, 500);\n }\n }, 1000);\n \n // Also try on player load\n var observer = new MutationObserver(tryTheater);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "YouTube Theater Mode Default");
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
GTHC - Game Tenting Help Center
Logo
README
Table of Context
  1. Installation
  2. Setup
  3. Configuration
Installation
  1. Install Docker and docker-compose. Please follow the instructions on how to do so in the links below.
    a. Docker
    b. docker-compose
  2. Install Ruby and Ruby on Rails.
    a. One of the easiest ways to do this: http://installrails.com
  3. Install Node.js. Please follow instructions on how to do so in the links below.
    a. Node.js
  4. Install PostgreSQL. Please follow instructions on how to do so in the links below.
    a. PostgreSQL
  5. Make sure you the yarn package manager installed by running: npm i -g yarn
    a. yarn is a great alternative to npm as a dependency manager for Node.js. Read more here.
Setup
Disclaimer: Windows users, it is highly recommended that the entire setup process should be done through the Windows Subsystem for Linux (WSL). Setting up WSL can be found here.
Pre-req: As mentioned in configuration, you must recieve the .env file from GTHC project leaders before beginning setup process.
  1. Install all packages/dependancies.
    a. Run bundle install
    b. Run yarn install
  2. yarn run setup
    a. This yarn script should run all of the necessary shell scripts to setup your Docker containers, bundle (ruby gems) dependencies, and your node dependencies.
  3. yarn dev:start
    a. This will start a local developer server, by default that will be on port 5000. (http://localhost:5000)
    b. Always run this command from here on out to start the local server.
Local Software Versioning
It is required that your system is running Rails 5.0+ for the local development to function properly. It is recommended to use the most recent version of Node, but anything above Node 8.x shall work.
Configuration
Important: There are private environment variables needed for certain aspects of the application. Therefore, it will be required that you have a .env file in the root of your project before running anything. Please contact the project leaders (Aman or Anesu) for this information. Finally, the .env file should not be pushed to github under no circumstances!
About
Tool to make tenting in K-Ville easier ⛺
www.gthc.io
Topics
dockerrailsreact
Resources
Readme
MIT license
Activity
Custom properties
Stars
2 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Remove or un-stick sticky/fixed headers that block content\n(function() {\n function unstick() {\n document.querySelectorAll('header, nav, [role=\"banner\"], .header, .navbar, .sticky, .fixed-top, [style*=\"position: fixed\"], [style*=\"position:sticky\"]').forEach(function(el) {\n if (el.style.position === 'fixed' || el.style.position === 'sticky' || \n getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {\n el.style.position = 'static';\n el.style.top = 'auto';\n el.style.zIndex = 'auto';\n }\n });\n }\n \n unstick();\n \n var observer = new MutationObserver(unstick);\n observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });\n})();", "Kill Sticky Headers");
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
GTHC - Game Tenting Help Center
Logo
README
Table of Context
  1. Installation
  2. Setup
  3. Configuration
Installation
  1. Install Docker and docker-compose. Please follow the instructions on how to do so in the links below.
    a. Docker
    b. docker-compose
  2. Install Ruby and Ruby on Rails.
    a. One of the easiest ways to do this: http://installrails.com
  3. Install Node.js. Please follow instructions on how to do so in the links below.
    a. Node.js
  4. Install PostgreSQL. Please follow instructions on how to do so in the links below.
    a. PostgreSQL
  5. Make sure you the yarn package manager installed by running: npm i -g yarn
    a. yarn is a great alternative to npm as a dependency manager for Node.js. Read more here.
Setup
Disclaimer: Windows users, it is highly recommended that the entire setup process should be done through the Windows Subsystem for Linux (WSL). Setting up WSL can be found here.
Pre-req: As mentioned in configuration, you must recieve the .env file from GTHC project leaders before beginning setup process.
  1. Install all packages/dependancies.
    a. Run bundle install
    b. Run yarn install
  2. yarn run setup
    a. This yarn script should run all of the necessary shell scripts to setup your Docker containers, bundle (ruby gems) dependencies, and your node dependencies.
  3. yarn dev:start
    a. This will start a local developer server, by default that will be on port 5000. (http://localhost:5000)
    b. Always run this command from here on out to start the local server.
Local Software Versioning
It is required that your system is running Rails 5.0+ for the local development to function properly. It is recommended to use the most recent version of Node, but anything above Node 8.x shall work.
Configuration
Important: There are private environment variables needed for certain aspects of the application. Therefore, it will be required that you have a .env file in the root of your project before running anything. Please contact the project leaders (Aman or Anesu) for this information. Finally, the .env file should not be pushed to github under no circumstances!
About
Tool to make tenting in K-Ville easier ⛺
www.gthc.io
Topics
dockerrailsreact
Resources
Readme
MIT license
Activity
Custom properties
Stars
2 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Universal Dark Mode - works on any site\n(function() {\n var enabled = true;\n \n function applyDarkMode() {\n if (!enabled) return;\n \n // Create style element if it doesn't exist\n var style = document.getElementById('universal-dark-mode-style');\n if (!style) {\n style = document.createElement('style');\n style.id = 'universal-dark-mode-style';\n document.head.appendChild(style);\n }\n \n // Dark mode CSS - inverts colors but preserves images/video\n style.textContent = '\n /* Invert everything except media */\n html {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #1a1a2e !important;\n }\n \n /* Restore images, videos, iframes, canvas */\n img, video, iframe, canvas, svg, picture, [style*=\"background-image\"] {\n filter: invert(1) hue-rotate(180deg) !important;\n }\n \n /* Preserve specific elements that should not be inverted */\n .no-dark-mode, .no-dark-mode *,\n [data-theme=\"light\"], [data-theme=\"light\"],\n .ace_editor, .ace_editor *,\n .CodeMirror, .CodeMirror *,\n .monaco-editor, .monaco-editor *,\n .markdown-body pre, .markdown-body pre *,\n .highlight, .highlight *,\n pre code, pre code * {\n filter: none !important;\n }\n \n /* Fix common UI elements */\n .modal, .popup, .dropdown-menu, .tooltip, .popover {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #2d2d44 !important;\n border-color: #444 !important;\n }\n \n /* Scrollbars */\n ::-webkit-scrollbar { background: #1a1a2e !important; }\n ::-webkit-scrollbar-thumb { background: #444 !important; }\n ::-webkit-scrollbar-thumb:hover { background: #555 !important; }\n \n /* Selection */\n ::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ';\n }\n \n function removeDarkMode() {\n var style = document.getElementById('universal-dark-mode-style');\n if (style) style.remove();\n }\n \n // Toggle with Alt+Shift+D\n document.addEventListener('keydown', function(e) {\n if (e.altKey && e.shiftKey && e.key === 'D') {\n e.preventDefault();\n enabled = !enabled;\n if (enabled) {\n applyDarkMode();\n console.log('[Universal Dark Mode] Enabled');\n } else {\n removeDarkMode();\n console.log('[Universal Dark Mode] Disabled');\n }\n }\n });\n \n // Apply on load\n applyDarkMode();\n \n // Re-apply on dynamic content\n var observer = new MutationObserver(function(mutations) {\n if (enabled && !document.getElementById('universal-dark-mode-style')) {\n applyDarkMode();\n }\n });\n observer.observe(document.head, { childList: true });\n \n console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');\n})();", "Universal Dark Mode");
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content
BranchesTags
Repository files navigation
GTHC - Game Tenting Help Center
Logo
README
Table of Context
  1. Installation
  2. Setup
  3. Configuration
Installation
  1. Install Docker and docker-compose. Please follow the instructions on how to do so in the links below.
    a. Docker
    b. docker-compose
  2. Install Ruby and Ruby on Rails.
    a. One of the easiest ways to do this: http://installrails.com
  3. Install Node.js. Please follow instructions on how to do so in the links below.
    a. Node.js
  4. Install PostgreSQL. Please follow instructions on how to do so in the links below.
    a. PostgreSQL
  5. Make sure you the yarn package manager installed by running: npm i -g yarn
    a. yarn is a great alternative to npm as a dependency manager for Node.js. Read more here.
Setup
Disclaimer: Windows users, it is highly recommended that the entire setup process should be done through the Windows Subsystem for Linux (WSL). Setting up WSL can be found here.
Pre-req: As mentioned in configuration, you must recieve the .env file from GTHC project leaders before beginning setup process.
  1. Install all packages/dependancies.
    a. Run bundle install
    b. Run yarn install
  2. yarn run setup
    a. This yarn script should run all of the necessary shell scripts to setup your Docker containers, bundle (ruby gems) dependencies, and your node dependencies.
  3. yarn dev:start
    a. This will start a local developer server, by default that will be on port 5000. (http://localhost:5000)
    b. Always run this command from here on out to start the local server.
Local Software Versioning
It is required that your system is running Rails 5.0+ for the local development to function properly. It is recommended to use the most recent version of Node, but anything above Node 8.x shall work.
Configuration
Important: There are private environment variables needed for certain aspects of the application. Therefore, it will be required that you have a .env file in the root of your project before running anything. Please contact the project leaders (Aman or Anesu) for this information. Finally, the .env file should not be pushed to github under no circumstances!
About
Tool to make tenting in K-Ville easier ⛺
www.gthc.io
Topics
dockerrailsreact
Resources
Readme
MIT license
Activity
Custom properties
Stars
2 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Used by
Contributors
Languages