Add map2loop processing tool dialogs accessible from plugin menu

[Copilot]

Overview

This PR implements popup dialog components for each of the map2loop processing tools, accessible from the plugin menu. These tools call the map2loop API classes directly instead of using QGIS processing algorithms, providing a more direct integration with the map2loop library.

Changes

Dialog Components Created

Five dialog components have been added in loopstructural/gui/map2loop_tools/:

1. SamplerDialog - Contact sampling

   • Supports both Decimator and Spacing algorithms from map2loop
   • Calls SamplerDecimator and SamplerSpacing directly
   • Dynamic UI that adapts to sampler type selection
   • Proper validation for required vs. optional inputs

2. SorterDialog - Automatic stratigraphic column sorting

   • Supports 6 sorting algorithms (Age-based, NetworkX, Adjacency α, Maximise contacts, Observation projections)
   • Dynamic UI that shows/hides fields based on selected algorithm
   • Special support for observation projections with structure data and DTM

3. UserDefinedSorterDialog - Manual stratigraphic column definition

   • Table-based interface with add/remove/move up/down functionality
   • Intuitive ordering from youngest (top) to oldest (bottom)

4. BasalContactsDialog - Basal contacts extraction

   • Integrates with geology, faults, and stratigraphic order layers
   • Configurable units to ignore
   • Outputs both basal contacts and all contacts

5. ThicknessCalculatorDialog - Stratigraphic thickness calculation

   • Supports InterpolatedStructure and StructuralPoint methods
   • Full integration with orientation data, DTM, and contact layers
   • Configurable parameters for each method

Menu Integration

Added 5 new menu items under Plugins → LoopStructural:

• Sampler
• Automatic Stratigraphic Sorter
• User-Defined Stratigraphic Column
• Extract Basal Contacts
• Thickness Calculator

Each menu item opens a popup dialog with the corresponding tool interface.

Direct map2loop API Usage

The sampler dialog demonstrates calling map2loop classes directly:

• Imports SamplerDecimator and SamplerSpacing from map2loop.sampler
• Converts QGIS layers to GeoDataFrames
• Calls sampler methods directly: sampler.sample(spatial_data_gdf)
• Converts results back to QGIS layers and adds to project

This pattern provides a thin interface layer over the map2loop API, allowing users to leverage map2loop's capabilities directly from QGIS.

Architecture

Each dialog follows established plugin patterns:

• Dialog wrapper contains the corresponding widget
• Widgets extend QWidget with corresponding .ui file loaded via uic.loadUi()
• Implements get_parameters() and set_parameters() methods for reusability
• Dynamic UI updates based on user selections
• Automatic field combo box binding when layers change
• Comprehensive input validation with user-friendly error messages

Design Philosophy Compliance

This implementation adheres to the plugin's architectural principles:

• Thin Interface Layer: Dialogs handle only UI and user interaction, delegating all processing to map2loop API classes
• Modularity: Each dialog is self-contained and can be launched independently from the menu
• Object-Oriented Design: Clear responsibilities, proper encapsulation, and consistent interfaces
• Code Quality: All code passes linting checks (ruff) and follows existing conventions

Files Added

loopstructural/gui/map2loop_tools/
├── __init__.py # Package exports
├── README.md # Comprehensive documentation
├── dialogs.py # Dialog wrappers for all tools
├── sorter_widget.py/.ui # Automatic sorter widget
├── user_defined_sorter_widget.py/.ui # User-defined sorter widget
├── sampler_widget.py/.ui # Sampler widget (calls map2loop directly)
├── basal_contacts_widget.py/.ui # Basal contacts widget
└── thickness_calculator_widget.py/.ui # Thickness calculator widget

Files Modified

• loopstructural/plugin_main.py - Added menu items and dialog show methods

Usage Example

# From plugin menu: Plugins → LoopStructural → Sampler# This opens a dialog that:# 1. Collects user inputs via the widget UI# 2. Converts QGIS layers to map2loop formats# 3. Calls map2loop.sampler.SamplerSpacing or SamplerDecimator directly# 4. Converts results back and adds to QGIS project

Benefits

• Direct API Access: Uses map2loop classes as an API, not through processing framework
• Standard UX: Follows QGIS convention of tool dialogs accessible from plugin menu
• No Interface Clutter: Tools don't take up dock widget space
• Independent Access: Each tool can be launched individually
• Maintainability: Changes to map2loop API can be incorporated directly

Testing

• ✓ All Python files pass syntax compilation
• ✓ All UI files validated as proper XML
• ✓ Code passes ruff linting with no errors
• ✓ Follows existing architectural patterns

Note: Full functional testing requires a QGIS environment with PyQt5, which is not available in CI. Manual testing in QGIS is recommended.

Related

This PR provides direct access to map2loop processing tools as an API within the plugin's GUI, making the workflow more streamlined for users performing geological modeling tasks.

Original prompt

Create separate widget/gui components for running each of the processing tools for map2loop. These need to be self contained with the ability to be incorporated into the main dock widget.

---

💬 We'd love your input! Share your thoughts on Copilot coding agent in our 2 minute survey.

[lachlangrose]

#64 contains these changes

[Copilot]

Overview

This PR implements popup dialog components for each of the map2loop processing tools, accessible from the plugin menu. These tools call the map2loop API classes directly instead of using QGIS processing algorithms, providing a more direct integration with the map2loop library.

Changes

Dialog Components Created

Five dialog components have been added in loopstructural/gui/map2loop_tools/:

1. SamplerDialog - Contact sampling

   • Supports both Decimator and Spacing algorithms from map2loop
   • Calls SamplerDecimator and SamplerSpacing directly
   • Dynamic UI that adapts to sampler type selection
   • Proper validation for required vs. optional inputs

2. SorterDialog - Automatic stratigraphic column sorting

   • Supports 6 sorting algorithms (Age-based, NetworkX, Adjacency α, Maximise contacts, Observation projections)
   • Dynamic UI that shows/hides fields based on selected algorithm
   • Special support for observation projections with structure data and DTM

3. UserDefinedSorterDialog - Manual stratigraphic column definition

   • Table-based interface with add/remove/move up/down functionality
   • Intuitive ordering from youngest (top) to oldest (bottom)

4. BasalContactsDialog - Basal contacts extraction

   • Integrates with geology, faults, and stratigraphic order layers
   • Configurable units to ignore
   • Outputs both basal contacts and all contacts

5. ThicknessCalculatorDialog - Stratigraphic thickness calculation

   • Supports InterpolatedStructure and StructuralPoint methods
   • Full integration with orientation data, DTM, and contact layers
   • Configurable parameters for each method

Menu Integration

Added 5 new menu items under Plugins → LoopStructural:

• Sampler
• Automatic Stratigraphic Sorter
• User-Defined Stratigraphic Column
• Extract Basal Contacts
• Thickness Calculator

Each menu item opens a popup dialog with the corresponding tool interface.

Direct map2loop API Usage

The sampler dialog demonstrates calling map2loop classes directly:

• Imports SamplerDecimator and SamplerSpacing from map2loop.sampler
• Converts QGIS layers to GeoDataFrames
• Calls sampler methods directly: sampler.sample(spatial_data_gdf)
• Converts results back to QGIS layers and adds to project

This pattern provides a thin interface layer over the map2loop API, allowing users to leverage map2loop's capabilities directly from QGIS.

Architecture

Each dialog follows established plugin patterns:

• Dialog wrapper contains the corresponding widget
• Widgets extend QWidget with corresponding .ui file loaded via uic.loadUi()
• Implements get_parameters() and set_parameters() methods for reusability
• Dynamic UI updates based on user selections
• Automatic field combo box binding when layers change
• Comprehensive input validation with user-friendly error messages

Design Philosophy Compliance

This implementation adheres to the plugin's architectural principles:

• Thin Interface Layer: Dialogs handle only UI and user interaction, delegating all processing to map2loop API classes
• Modularity: Each dialog is self-contained and can be launched independently from the menu
• Object-Oriented Design: Clear responsibilities, proper encapsulation, and consistent interfaces
• Code Quality: All code passes linting checks (ruff) and follows existing conventions

Files Added

loopstructural/gui/map2loop_tools/
├── __init__.py # Package exports
├── README.md # Comprehensive documentation
├── dialogs.py # Dialog wrappers for all tools
├── sorter_widget.py/.ui # Automatic sorter widget
├── user_defined_sorter_widget.py/.ui # User-defined sorter widget
├── sampler_widget.py/.ui # Sampler widget (calls map2loop directly)
├── basal_contacts_widget.py/.ui # Basal contacts widget
└── thickness_calculator_widget.py/.ui # Thickness calculator widget

Files Modified

• loopstructural/plugin_main.py - Added menu items and dialog show methods

Usage Example

# From plugin menu: Plugins → LoopStructural → Sampler# This opens a dialog that:# 1. Collects user inputs via the widget UI# 2. Converts QGIS layers to map2loop formats# 3. Calls map2loop.sampler.SamplerSpacing or SamplerDecimator directly# 4. Converts results back and adds to QGIS project

Benefits

• Direct API Access: Uses map2loop classes as an API, not through processing framework
• Standard UX: Follows QGIS convention of tool dialogs accessible from plugin menu
• No Interface Clutter: Tools don't take up dock widget space
• Independent Access: Each tool can be launched individually
• Maintainability: Changes to map2loop API can be incorporated directly

Testing

• ✓ All Python files pass syntax compilation
• ✓ All UI files validated as proper XML
• ✓ Code passes ruff linting with no errors
• ✓ Follows existing architectural patterns

Note: Full functional testing requires a QGIS environment with PyQt5, which is not available in CI. Manual testing in QGIS is recommended.

Related

This PR provides direct access to map2loop processing tools as an API within the plugin's GUI, making the workflow more streamlined for users performing geological modeling tasks.

Original prompt

Create separate widget/gui components for running each of the processing tools for map2loop. These need to be self contained with the ability to be incorporated into the main dock widget.

---

💬 We'd love your input! Share your thoughts on Copilot coding agent in our 2 minute survey.

[lachlangrose]

#64 contains these changes

[Copilot]

Overview

This PR implements popup dialog components for each of the map2loop processing tools, accessible from the plugin menu. These tools call the map2loop API classes directly instead of using QGIS processing algorithms, providing a more direct integration with the map2loop library.

Changes

Dialog Components Created

Five dialog components have been added in loopstructural/gui/map2loop_tools/:

1. SamplerDialog - Contact sampling

   • Supports both Decimator and Spacing algorithms from map2loop
   • Calls SamplerDecimator and SamplerSpacing directly
   • Dynamic UI that adapts to sampler type selection
   • Proper validation for required vs. optional inputs

2. SorterDialog - Automatic stratigraphic column sorting

   • Supports 6 sorting algorithms (Age-based, NetworkX, Adjacency α, Maximise contacts, Observation projections)
   • Dynamic UI that shows/hides fields based on selected algorithm
   • Special support for observation projections with structure data and DTM

3. UserDefinedSorterDialog - Manual stratigraphic column definition

   • Table-based interface with add/remove/move up/down functionality
   • Intuitive ordering from youngest (top) to oldest (bottom)

4. BasalContactsDialog - Basal contacts extraction

   • Integrates with geology, faults, and stratigraphic order layers
   • Configurable units to ignore
   • Outputs both basal contacts and all contacts

5. ThicknessCalculatorDialog - Stratigraphic thickness calculation

   • Supports InterpolatedStructure and StructuralPoint methods
   • Full integration with orientation data, DTM, and contact layers
   • Configurable parameters for each method

Menu Integration

Added 5 new menu items under Plugins → LoopStructural:

• Sampler
• Automatic Stratigraphic Sorter
• User-Defined Stratigraphic Column
• Extract Basal Contacts
• Thickness Calculator

Each menu item opens a popup dialog with the corresponding tool interface.

Direct map2loop API Usage

The sampler dialog demonstrates calling map2loop classes directly:

• Imports SamplerDecimator and SamplerSpacing from map2loop.sampler
• Converts QGIS layers to GeoDataFrames
• Calls sampler methods directly: sampler.sample(spatial_data_gdf)
• Converts results back to QGIS layers and adds to project

This pattern provides a thin interface layer over the map2loop API, allowing users to leverage map2loop's capabilities directly from QGIS.

Architecture

Each dialog follows established plugin patterns:

• Dialog wrapper contains the corresponding widget
• Widgets extend QWidget with corresponding .ui file loaded via uic.loadUi()
• Implements get_parameters() and set_parameters() methods for reusability
• Dynamic UI updates based on user selections
• Automatic field combo box binding when layers change
• Comprehensive input validation with user-friendly error messages

Design Philosophy Compliance

This implementation adheres to the plugin's architectural principles:

• Thin Interface Layer: Dialogs handle only UI and user interaction, delegating all processing to map2loop API classes
• Modularity: Each dialog is self-contained and can be launched independently from the menu
• Object-Oriented Design: Clear responsibilities, proper encapsulation, and consistent interfaces
• Code Quality: All code passes linting checks (ruff) and follows existing conventions

Files Added

loopstructural/gui/map2loop_tools/
├── __init__.py # Package exports
├── README.md # Comprehensive documentation
├── dialogs.py # Dialog wrappers for all tools
├── sorter_widget.py/.ui # Automatic sorter widget
├── user_defined_sorter_widget.py/.ui # User-defined sorter widget
├── sampler_widget.py/.ui # Sampler widget (calls map2loop directly)
├── basal_contacts_widget.py/.ui # Basal contacts widget
└── thickness_calculator_widget.py/.ui # Thickness calculator widget

Files Modified

• loopstructural/plugin_main.py - Added menu items and dialog show methods

Usage Example

# From plugin menu: Plugins → LoopStructural → Sampler# This opens a dialog that:# 1. Collects user inputs via the widget UI# 2. Converts QGIS layers to map2loop formats# 3. Calls map2loop.sampler.SamplerSpacing or SamplerDecimator directly# 4. Converts results back and adds to QGIS project

Benefits

• Direct API Access: Uses map2loop classes as an API, not through processing framework
• Standard UX: Follows QGIS convention of tool dialogs accessible from plugin menu
• No Interface Clutter: Tools don't take up dock widget space
• Independent Access: Each tool can be launched individually
• Maintainability: Changes to map2loop API can be incorporated directly

Testing

• ✓ All Python files pass syntax compilation
• ✓ All UI files validated as proper XML
• ✓ Code passes ruff linting with no errors
• ✓ Follows existing architectural patterns

Note: Full functional testing requires a QGIS environment with PyQt5, which is not available in CI. Manual testing in QGIS is recommended.

Related

This PR provides direct access to map2loop processing tools as an API within the plugin's GUI, making the workflow more streamlined for users performing geological modeling tasks.

Original prompt

Create separate widget/gui components for running each of the processing tools for map2loop. These need to be self contained with the ability to be incorporated into the main dock widget.

---

💬 We'd love your input! Share your thoughts on Copilot coding agent in our 2 minute survey.

[lachlangrose]

#64 contains these changes

[Copilot]

Overview

This PR implements popup dialog components for each of the map2loop processing tools, accessible from the plugin menu. These tools call the map2loop API classes directly instead of using QGIS processing algorithms, providing a more direct integration with the map2loop library.

Changes

Dialog Components Created

Five dialog components have been added in loopstructural/gui/map2loop_tools/:

1. SamplerDialog - Contact sampling

   • Supports both Decimator and Spacing algorithms from map2loop
   • Calls SamplerDecimator and SamplerSpacing directly
   • Dynamic UI that adapts to sampler type selection
   • Proper validation for required vs. optional inputs

2. SorterDialog - Automatic stratigraphic column sorting

   • Supports 6 sorting algorithms (Age-based, NetworkX, Adjacency α, Maximise contacts, Observation projections)
   • Dynamic UI that shows/hides fields based on selected algorithm
   • Special support for observation projections with structure data and DTM

3. UserDefinedSorterDialog - Manual stratigraphic column definition

   • Table-based interface with add/remove/move up/down functionality
   • Intuitive ordering from youngest (top) to oldest (bottom)

4. BasalContactsDialog - Basal contacts extraction

   • Integrates with geology, faults, and stratigraphic order layers
   • Configurable units to ignore
   • Outputs both basal contacts and all contacts

5. ThicknessCalculatorDialog - Stratigraphic thickness calculation

   • Supports InterpolatedStructure and StructuralPoint methods
   • Full integration with orientation data, DTM, and contact layers
   • Configurable parameters for each method

Menu Integration

Added 5 new menu items under Plugins → LoopStructural:

• Sampler
• Automatic Stratigraphic Sorter
• User-Defined Stratigraphic Column
• Extract Basal Contacts
• Thickness Calculator

Each menu item opens a popup dialog with the corresponding tool interface.

Direct map2loop API Usage

The sampler dialog demonstrates calling map2loop classes directly:

• Imports SamplerDecimator and SamplerSpacing from map2loop.sampler
• Converts QGIS layers to GeoDataFrames
• Calls sampler methods directly: sampler.sample(spatial_data_gdf)
• Converts results back to QGIS layers and adds to project

This pattern provides a thin interface layer over the map2loop API, allowing users to leverage map2loop's capabilities directly from QGIS.

Architecture

Each dialog follows established plugin patterns:

• Dialog wrapper contains the corresponding widget
• Widgets extend QWidget with corresponding .ui file loaded via uic.loadUi()
• Implements get_parameters() and set_parameters() methods for reusability
• Dynamic UI updates based on user selections
• Automatic field combo box binding when layers change
• Comprehensive input validation with user-friendly error messages

Design Philosophy Compliance

This implementation adheres to the plugin's architectural principles:

• Thin Interface Layer: Dialogs handle only UI and user interaction, delegating all processing to map2loop API classes
• Modularity: Each dialog is self-contained and can be launched independently from the menu
• Object-Oriented Design: Clear responsibilities, proper encapsulation, and consistent interfaces
• Code Quality: All code passes linting checks (ruff) and follows existing conventions

Files Added

loopstructural/gui/map2loop_tools/
├── __init__.py # Package exports
├── README.md # Comprehensive documentation
├── dialogs.py # Dialog wrappers for all tools
├── sorter_widget.py/.ui # Automatic sorter widget
├── user_defined_sorter_widget.py/.ui # User-defined sorter widget
├── sampler_widget.py/.ui # Sampler widget (calls map2loop directly)
├── basal_contacts_widget.py/.ui # Basal contacts widget
└── thickness_calculator_widget.py/.ui # Thickness calculator widget

Files Modified

• loopstructural/plugin_main.py - Added menu items and dialog show methods

Usage Example

# From plugin menu: Plugins → LoopStructural → Sampler# This opens a dialog that:# 1. Collects user inputs via the widget UI# 2. Converts QGIS layers to map2loop formats# 3. Calls map2loop.sampler.SamplerSpacing or SamplerDecimator directly# 4. Converts results back and adds to QGIS project

Benefits

• Direct API Access: Uses map2loop classes as an API, not through processing framework
• Standard UX: Follows QGIS convention of tool dialogs accessible from plugin menu
• No Interface Clutter: Tools don't take up dock widget space
• Independent Access: Each tool can be launched individually
• Maintainability: Changes to map2loop API can be incorporated directly

Testing

• ✓ All Python files pass syntax compilation
• ✓ All UI files validated as proper XML
• ✓ Code passes ruff linting with no errors
• ✓ Follows existing architectural patterns

Note: Full functional testing requires a QGIS environment with PyQt5, which is not available in CI. Manual testing in QGIS is recommended.

Related

This PR provides direct access to map2loop processing tools as an API within the plugin's GUI, making the workflow more streamlined for users performing geological modeling tasks.

Original prompt

Create separate widget/gui components for running each of the processing tools for map2loop. These need to be self contained with the ability to be incorporated into the main dock widget.

---

💬 We'd love your input! Share your thoughts on Copilot coding agent in our 2 minute survey.

[lachlangrose]

#64 contains these changes

[Copilot]

Overview

This PR implements popup dialog components for each of the map2loop processing tools, accessible from the plugin menu. These tools call the map2loop API classes directly instead of using QGIS processing algorithms, providing a more direct integration with the map2loop library.

Changes

Dialog Components Created

Five dialog components have been added in loopstructural/gui/map2loop_tools/:

1. SamplerDialog - Contact sampling

   • Supports both Decimator and Spacing algorithms from map2loop
   • Calls SamplerDecimator and SamplerSpacing directly
   • Dynamic UI that adapts to sampler type selection
   • Proper validation for required vs. optional inputs

2. SorterDialog - Automatic stratigraphic column sorting

   • Supports 6 sorting algorithms (Age-based, NetworkX, Adjacency α, Maximise contacts, Observation projections)
   • Dynamic UI that shows/hides fields based on selected algorithm
   • Special support for observation projections with structure data and DTM

3. UserDefinedSorterDialog - Manual stratigraphic column definition

   • Table-based interface with add/remove/move up/down functionality
   • Intuitive ordering from youngest (top) to oldest (bottom)

4. BasalContactsDialog - Basal contacts extraction

   • Integrates with geology, faults, and stratigraphic order layers
   • Configurable units to ignore
   • Outputs both basal contacts and all contacts

5. ThicknessCalculatorDialog - Stratigraphic thickness calculation

   • Supports InterpolatedStructure and StructuralPoint methods
   • Full integration with orientation data, DTM, and contact layers
   • Configurable parameters for each method

Menu Integration

Added 5 new menu items under Plugins → LoopStructural:

• Sampler
• Automatic Stratigraphic Sorter
• User-Defined Stratigraphic Column
• Extract Basal Contacts
• Thickness Calculator

Each menu item opens a popup dialog with the corresponding tool interface.

Direct map2loop API Usage

The sampler dialog demonstrates calling map2loop classes directly:

• Imports SamplerDecimator and SamplerSpacing from map2loop.sampler
• Converts QGIS layers to GeoDataFrames
• Calls sampler methods directly: sampler.sample(spatial_data_gdf)
• Converts results back to QGIS layers and adds to project

This pattern provides a thin interface layer over the map2loop API, allowing users to leverage map2loop's capabilities directly from QGIS.

Architecture

Each dialog follows established plugin patterns:

• Dialog wrapper contains the corresponding widget
• Widgets extend QWidget with corresponding .ui file loaded via uic.loadUi()
• Implements get_parameters() and set_parameters() methods for reusability
• Dynamic UI updates based on user selections
• Automatic field combo box binding when layers change
• Comprehensive input validation with user-friendly error messages

Design Philosophy Compliance

This implementation adheres to the plugin's architectural principles:

• Thin Interface Layer: Dialogs handle only UI and user interaction, delegating all processing to map2loop API classes
• Modularity: Each dialog is self-contained and can be launched independently from the menu
• Object-Oriented Design: Clear responsibilities, proper encapsulation, and consistent interfaces
• Code Quality: All code passes linting checks (ruff) and follows existing conventions

Files Added

loopstructural/gui/map2loop_tools/
├── __init__.py # Package exports
├── README.md # Comprehensive documentation
├── dialogs.py # Dialog wrappers for all tools
├── sorter_widget.py/.ui # Automatic sorter widget
├── user_defined_sorter_widget.py/.ui # User-defined sorter widget
├── sampler_widget.py/.ui # Sampler widget (calls map2loop directly)
├── basal_contacts_widget.py/.ui # Basal contacts widget
└── thickness_calculator_widget.py/.ui # Thickness calculator widget

Files Modified

• loopstructural/plugin_main.py - Added menu items and dialog show methods

Usage Example

# From plugin menu: Plugins → LoopStructural → Sampler# This opens a dialog that:# 1. Collects user inputs via the widget UI# 2. Converts QGIS layers to map2loop formats# 3. Calls map2loop.sampler.SamplerSpacing or SamplerDecimator directly# 4. Converts results back and adds to QGIS project

Benefits

• Direct API Access: Uses map2loop classes as an API, not through processing framework
• Standard UX: Follows QGIS convention of tool dialogs accessible from plugin menu
• No Interface Clutter: Tools don't take up dock widget space
• Independent Access: Each tool can be launched individually
• Maintainability: Changes to map2loop API can be incorporated directly

Testing

• ✓ All Python files pass syntax compilation
• ✓ All UI files validated as proper XML
• ✓ Code passes ruff linting with no errors
• ✓ Follows existing architectural patterns

Note: Full functional testing requires a QGIS environment with PyQt5, which is not available in CI. Manual testing in QGIS is recommended.

Related

This PR provides direct access to map2loop processing tools as an API within the plugin's GUI, making the workflow more streamlined for users performing geological modeling tasks.

Original prompt

Create separate widget/gui components for running each of the processing tools for map2loop. These need to be self contained with the ability to be incorporated into the main dock widget.

---

💬 We'd love your input! Share your thoughts on Copilot coding agent in our 2 minute survey.

[lachlangrose]

#64 contains these changes

[Copilot]

Overview

This PR implements popup dialog components for each of the map2loop processing tools, accessible from the plugin menu. These tools call the map2loop API classes directly instead of using QGIS processing algorithms, providing a more direct integration with the map2loop library.

Changes

Dialog Components Created

Five dialog components have been added in loopstructural/gui/map2loop_tools/:

1. SamplerDialog - Contact sampling

   • Supports both Decimator and Spacing algorithms from map2loop
   • Calls SamplerDecimator and SamplerSpacing directly
   • Dynamic UI that adapts to sampler type selection
   • Proper validation for required vs. optional inputs

2. SorterDialog - Automatic stratigraphic column sorting

   • Supports 6 sorting algorithms (Age-based, NetworkX, Adjacency α, Maximise contacts, Observation projections)
   • Dynamic UI that shows/hides fields based on selected algorithm
   • Special support for observation projections with structure data and DTM

3. UserDefinedSorterDialog - Manual stratigraphic column definition

   • Table-based interface with add/remove/move up/down functionality
   • Intuitive ordering from youngest (top) to oldest (bottom)

4. BasalContactsDialog - Basal contacts extraction

   • Integrates with geology, faults, and stratigraphic order layers
   • Configurable units to ignore
   • Outputs both basal contacts and all contacts

5. ThicknessCalculatorDialog - Stratigraphic thickness calculation

   • Supports InterpolatedStructure and StructuralPoint methods
   • Full integration with orientation data, DTM, and contact layers
   • Configurable parameters for each method

Menu Integration

Added 5 new menu items under Plugins → LoopStructural:

• Sampler
• Automatic Stratigraphic Sorter
• User-Defined Stratigraphic Column
• Extract Basal Contacts
• Thickness Calculator

Each menu item opens a popup dialog with the corresponding tool interface.

Direct map2loop API Usage

The sampler dialog demonstrates calling map2loop classes directly:

• Imports SamplerDecimator and SamplerSpacing from map2loop.sampler
• Converts QGIS layers to GeoDataFrames
• Calls sampler methods directly: sampler.sample(spatial_data_gdf)
• Converts results back to QGIS layers and adds to project

This pattern provides a thin interface layer over the map2loop API, allowing users to leverage map2loop's capabilities directly from QGIS.

Architecture

Each dialog follows established plugin patterns:

• Dialog wrapper contains the corresponding widget
• Widgets extend QWidget with corresponding .ui file loaded via uic.loadUi()
• Implements get_parameters() and set_parameters() methods for reusability
• Dynamic UI updates based on user selections
• Automatic field combo box binding when layers change
• Comprehensive input validation with user-friendly error messages

Design Philosophy Compliance

This implementation adheres to the plugin's architectural principles:

• Thin Interface Layer: Dialogs handle only UI and user interaction, delegating all processing to map2loop API classes
• Modularity: Each dialog is self-contained and can be launched independently from the menu
• Object-Oriented Design: Clear responsibilities, proper encapsulation, and consistent interfaces
• Code Quality: All code passes linting checks (ruff) and follows existing conventions

Files Added

loopstructural/gui/map2loop_tools/
├── __init__.py # Package exports
├── README.md # Comprehensive documentation
├── dialogs.py # Dialog wrappers for all tools
├── sorter_widget.py/.ui # Automatic sorter widget
├── user_defined_sorter_widget.py/.ui # User-defined sorter widget
├── sampler_widget.py/.ui # Sampler widget (calls map2loop directly)
├── basal_contacts_widget.py/.ui # Basal contacts widget
└── thickness_calculator_widget.py/.ui # Thickness calculator widget

Files Modified

• loopstructural/plugin_main.py - Added menu items and dialog show methods

Usage Example

# From plugin menu: Plugins → LoopStructural → Sampler# This opens a dialog that:# 1. Collects user inputs via the widget UI# 2. Converts QGIS layers to map2loop formats# 3. Calls map2loop.sampler.SamplerSpacing or SamplerDecimator directly# 4. Converts results back and adds to QGIS project

Benefits

• Direct API Access: Uses map2loop classes as an API, not through processing framework
• Standard UX: Follows QGIS convention of tool dialogs accessible from plugin menu
• No Interface Clutter: Tools don't take up dock widget space
• Independent Access: Each tool can be launched individually
• Maintainability: Changes to map2loop API can be incorporated directly

Testing

• ✓ All Python files pass syntax compilation
• ✓ All UI files validated as proper XML
• ✓ Code passes ruff linting with no errors
• ✓ Follows existing architectural patterns

Note: Full functional testing requires a QGIS environment with PyQt5, which is not available in CI. Manual testing in QGIS is recommended.

Related

This PR provides direct access to map2loop processing tools as an API within the plugin's GUI, making the workflow more streamlined for users performing geological modeling tasks.

Original prompt

Create separate widget/gui components for running each of the processing tools for map2loop. These need to be self contained with the ability to be incorporated into the main dock widget.

---

💬 We'd love your input! Share your thoughts on Copilot coding agent in our 2 minute survey.

[lachlangrose]

#64 contains these changes

[Copilot]

Overview

This PR implements popup dialog components for each of the map2loop processing tools, accessible from the plugin menu. These tools call the map2loop API classes directly instead of using QGIS processing algorithms, providing a more direct integration with the map2loop library.

Changes

Dialog Components Created

Five dialog components have been added in loopstructural/gui/map2loop_tools/:

1. SamplerDialog - Contact sampling

   • Supports both Decimator and Spacing algorithms from map2loop
   • Calls SamplerDecimator and SamplerSpacing directly
   • Dynamic UI that adapts to sampler type selection
   • Proper validation for required vs. optional inputs

2. SorterDialog - Automatic stratigraphic column sorting

   • Supports 6 sorting algorithms (Age-based, NetworkX, Adjacency α, Maximise contacts, Observation projections)
   • Dynamic UI that shows/hides fields based on selected algorithm
   • Special support for observation projections with structure data and DTM

3. UserDefinedSorterDialog - Manual stratigraphic column definition

   • Table-based interface with add/remove/move up/down functionality
   • Intuitive ordering from youngest (top) to oldest (bottom)

4. BasalContactsDialog - Basal contacts extraction

   • Integrates with geology, faults, and stratigraphic order layers
   • Configurable units to ignore
   • Outputs both basal contacts and all contacts

5. ThicknessCalculatorDialog - Stratigraphic thickness calculation

   • Supports InterpolatedStructure and StructuralPoint methods
   • Full integration with orientation data, DTM, and contact layers
   • Configurable parameters for each method

Menu Integration

Added 5 new menu items under Plugins → LoopStructural:

• Sampler
• Automatic Stratigraphic Sorter
• User-Defined Stratigraphic Column
• Extract Basal Contacts
• Thickness Calculator

Each menu item opens a popup dialog with the corresponding tool interface.

Direct map2loop API Usage

The sampler dialog demonstrates calling map2loop classes directly:

• Imports SamplerDecimator and SamplerSpacing from map2loop.sampler
• Converts QGIS layers to GeoDataFrames
• Calls sampler methods directly: sampler.sample(spatial_data_gdf)
• Converts results back to QGIS layers and adds to project

This pattern provides a thin interface layer over the map2loop API, allowing users to leverage map2loop's capabilities directly from QGIS.

Architecture

Each dialog follows established plugin patterns:

• Dialog wrapper contains the corresponding widget
• Widgets extend QWidget with corresponding .ui file loaded via uic.loadUi()
• Implements get_parameters() and set_parameters() methods for reusability
• Dynamic UI updates based on user selections
• Automatic field combo box binding when layers change
• Comprehensive input validation with user-friendly error messages

Design Philosophy Compliance

This implementation adheres to the plugin's architectural principles:

• Thin Interface Layer: Dialogs handle only UI and user interaction, delegating all processing to map2loop API classes
• Modularity: Each dialog is self-contained and can be launched independently from the menu
• Object-Oriented Design: Clear responsibilities, proper encapsulation, and consistent interfaces
• Code Quality: All code passes linting checks (ruff) and follows existing conventions

Files Added

loopstructural/gui/map2loop_tools/
├── __init__.py # Package exports
├── README.md # Comprehensive documentation
├── dialogs.py # Dialog wrappers for all tools
├── sorter_widget.py/.ui # Automatic sorter widget
├── user_defined_sorter_widget.py/.ui # User-defined sorter widget
├── sampler_widget.py/.ui # Sampler widget (calls map2loop directly)
├── basal_contacts_widget.py/.ui # Basal contacts widget
└── thickness_calculator_widget.py/.ui # Thickness calculator widget

Files Modified

• loopstructural/plugin_main.py - Added menu items and dialog show methods

Usage Example

# From plugin menu: Plugins → LoopStructural → Sampler# This opens a dialog that:# 1. Collects user inputs via the widget UI# 2. Converts QGIS layers to map2loop formats# 3. Calls map2loop.sampler.SamplerSpacing or SamplerDecimator directly# 4. Converts results back and adds to QGIS project

Benefits

• Direct API Access: Uses map2loop classes as an API, not through processing framework
• Standard UX: Follows QGIS convention of tool dialogs accessible from plugin menu
• No Interface Clutter: Tools don't take up dock widget space
• Independent Access: Each tool can be launched individually
• Maintainability: Changes to map2loop API can be incorporated directly

Testing

• ✓ All Python files pass syntax compilation
• ✓ All UI files validated as proper XML
• ✓ Code passes ruff linting with no errors
• ✓ Follows existing architectural patterns

Note: Full functional testing requires a QGIS environment with PyQt5, which is not available in CI. Manual testing in QGIS is recommended.

Related

This PR provides direct access to map2loop processing tools as an API within the plugin's GUI, making the workflow more streamlined for users performing geological modeling tasks.

Original prompt

Create separate widget/gui components for running each of the processing tools for map2loop. These need to be self contained with the ability to be incorporated into the main dock widget.

---

💬 We'd love your input! Share your thoughts on Copilot coding agent in our 2 minute survey.

[lachlangrose]

#64 contains these changes

[Copilot]

Overview

This PR implements popup dialog components for each of the map2loop processing tools, accessible from the plugin menu. These tools call the map2loop API classes directly instead of using QGIS processing algorithms, providing a more direct integration with the map2loop library.

Changes

Dialog Components Created

Five dialog components have been added in loopstructural/gui/map2loop_tools/:

1. SamplerDialog - Contact sampling

   • Supports both Decimator and Spacing algorithms from map2loop
   • Calls SamplerDecimator and SamplerSpacing directly
   • Dynamic UI that adapts to sampler type selection
   • Proper validation for required vs. optional inputs

2. SorterDialog - Automatic stratigraphic column sorting

   • Supports 6 sorting algorithms (Age-based, NetworkX, Adjacency α, Maximise contacts, Observation projections)
   • Dynamic UI that shows/hides fields based on selected algorithm
   • Special support for observation projections with structure data and DTM

3. UserDefinedSorterDialog - Manual stratigraphic column definition

   • Table-based interface with add/remove/move up/down functionality
   • Intuitive ordering from youngest (top) to oldest (bottom)

4. BasalContactsDialog - Basal contacts extraction

   • Integrates with geology, faults, and stratigraphic order layers
   • Configurable units to ignore
   • Outputs both basal contacts and all contacts

5. ThicknessCalculatorDialog - Stratigraphic thickness calculation

   • Supports InterpolatedStructure and StructuralPoint methods
   • Full integration with orientation data, DTM, and contact layers
   • Configurable parameters for each method

Menu Integration

Added 5 new menu items under Plugins → LoopStructural:

• Sampler
• Automatic Stratigraphic Sorter
• User-Defined Stratigraphic Column
• Extract Basal Contacts
• Thickness Calculator

Each menu item opens a popup dialog with the corresponding tool interface.

Direct map2loop API Usage

The sampler dialog demonstrates calling map2loop classes directly:

• Imports SamplerDecimator and SamplerSpacing from map2loop.sampler
• Converts QGIS layers to GeoDataFrames
• Calls sampler methods directly: sampler.sample(spatial_data_gdf)
• Converts results back to QGIS layers and adds to project

This pattern provides a thin interface layer over the map2loop API, allowing users to leverage map2loop's capabilities directly from QGIS.

Architecture

Each dialog follows established plugin patterns:

• Dialog wrapper contains the corresponding widget
• Widgets extend QWidget with corresponding .ui file loaded via uic.loadUi()
• Implements get_parameters() and set_parameters() methods for reusability
• Dynamic UI updates based on user selections
• Automatic field combo box binding when layers change
• Comprehensive input validation with user-friendly error messages

Design Philosophy Compliance

This implementation adheres to the plugin's architectural principles:

• Thin Interface Layer: Dialogs handle only UI and user interaction, delegating all processing to map2loop API classes
• Modularity: Each dialog is self-contained and can be launched independently from the menu
• Object-Oriented Design: Clear responsibilities, proper encapsulation, and consistent interfaces
• Code Quality: All code passes linting checks (ruff) and follows existing conventions

Files Added

loopstructural/gui/map2loop_tools/
├── __init__.py # Package exports
├── README.md # Comprehensive documentation
├── dialogs.py # Dialog wrappers for all tools
├── sorter_widget.py/.ui # Automatic sorter widget
├── user_defined_sorter_widget.py/.ui # User-defined sorter widget
├── sampler_widget.py/.ui # Sampler widget (calls map2loop directly)
├── basal_contacts_widget.py/.ui # Basal contacts widget
└── thickness_calculator_widget.py/.ui # Thickness calculator widget

Files Modified

• loopstructural/plugin_main.py - Added menu items and dialog show methods

Usage Example

# From plugin menu: Plugins → LoopStructural → Sampler# This opens a dialog that:# 1. Collects user inputs via the widget UI# 2. Converts QGIS layers to map2loop formats# 3. Calls map2loop.sampler.SamplerSpacing or SamplerDecimator directly# 4. Converts results back and adds to QGIS project

Benefits

• Direct API Access: Uses map2loop classes as an API, not through processing framework
• Standard UX: Follows QGIS convention of tool dialogs accessible from plugin menu
• No Interface Clutter: Tools don't take up dock widget space
• Independent Access: Each tool can be launched individually
• Maintainability: Changes to map2loop API can be incorporated directly

Testing

• ✓ All Python files pass syntax compilation
• ✓ All UI files validated as proper XML
• ✓ Code passes ruff linting with no errors
• ✓ Follows existing architectural patterns

Note: Full functional testing requires a QGIS environment with PyQt5, which is not available in CI. Manual testing in QGIS is recommended.

Related

This PR provides direct access to map2loop processing tools as an API within the plugin's GUI, making the workflow more streamlined for users performing geological modeling tasks.

Original prompt

Create separate widget/gui components for running each of the processing tools for map2loop. These need to be self contained with the ability to be incorporated into the main dock widget.

---

💬 We'd love your input! Share your thoughts on Copilot coding agent in our 2 minute survey.

[lachlangrose]

#64 contains these changes