BranchesTags

Latest commit

History

6 Commits

Folders and files

NameName
Last commit message
Last commit date
ebikeField
ebikeField
.gitignore
.gitignore
LICENSE
LICENSE
README.md
README.md

Repository files navigation

ebikeDataField

This project is a simple data field for Garmin watches, built using Garmin Connect IQ (CIQ).

This project was derived from Mark.Ai's project at https://github.com/markdotai/emtb which is released in the Garmin app store here: https://apps.garmin.com/en-US/apps/461743f9-b350-486f-bd87-613c7b0bab90.

It allows your watch to connect to a a Shimano STEPS e-bike using Bluetooth Low Energy (BLE) and displays information (like battery percentage, assist mode, gear number). Because Mark published his project (code) on GitHub and the datafield did not work on my VivoActive 4 I started to investigate his work. Searching for bugs I also started to change his code and had a peek in jim_m_58's code. The result is the code you see here.

THE BUG: there is no bug in Mark's code. The bug is somewhere in Garmin's CIQ software on some watches. An CIQ app using BluetoothLowEnergie (BLE) can register up to 3 Bluetooth Profile Definitions. On the VivoActive 4, and Venu watches, the registration fails for every 2nd and 3rd profile. The result is that the app connects over BLE with the ebike but data is not exchanged and that is mistaken by users as an app failure. This app will display an error message "ErrPrf_1" or "ErrPrf_2" where 1 and 2 are the failed number of registreations. See the bug report and status at: https://forums.garmin.com/developer/connect-iq/i/bug-reports/vivoactive-4-bledelegate-onprofileregister-returns-status-value-2-on-every-2nd-and-3rd-registerprofile

This app is currently not released in the Garmin app store.

When you start developing for Garmin Connect IQ then don't forget to read this page: https://forums.garmin.com/developer/connect-iq/w/wiki/4/new-developer-faq .

About

A data field allowing Garmin watches to show information about a Shimano STEPS ebike.

Topics

blebluetoothciqconnectdataebikeembnemtbenergyfieldgarmingarmin-connectiqlowshimanosteps

Resources

Readme
MIT license
Activity

Stars

6 stars

Watchers

1 watching

Forks

2 forks
Report repository

Packages

Contributors

, 'i'); if (__m === '*' || __re.test(location.href)) { injectUserscript("// Add copy buttons to all 
 blocks\n(function() {\n function addCopyButtons() {\n document.querySelectorAll('pre code').forEach(function(codeBlock) {\n if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;\n codeBlock.parentElement.setAttribute('data-copy-added', 'true');\n \n var btn = document.createElement('button');\n btn.textContent = 'Copy';\n btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';\n btn.onmouseover = function() { this.style.opacity = '1'; };\n btn.onmouseout = function() { this.style.opacity = '0.7'; };\n btn.onclick = function() {\n navigator.clipboard.writeText(codeBlock.textContent).then(function() {\n btn.textContent = 'Copied!';\n setTimeout(function() { btn.textContent = 'Copy'; }, 1500);\n });\n };\n codeBlock.parentElement.style.position = 'relative';\n codeBlock.parentElement.appendChild(btn);\n });\n }\n \n addCopyButtons();\n \n // Re-run on dynamic content\n var observer = new MutationObserver(addCopyButtons);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Add Copy Buttons to Code Blocks");
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content
BranchesTags
Latest commit
History
6 Commits
Folders and files
NameName
Last commit message
Last commit date
ebikeField
ebikeField
.gitignore
.gitignore
LICENSE
LICENSE
README.md
README.md
Repository files navigation
ebikeDataField
This project is a simple data field for Garmin watches, built using Garmin Connect IQ (CIQ).
This project was derived from Mark.Ai's project at https://github.com/markdotai/emtb which is released
in the Garmin app store here: https://apps.garmin.com/en-US/apps/461743f9-b350-486f-bd87-613c7b0bab90.
It allows your watch to connect to a a Shimano STEPS e-bike using Bluetooth Low Energy (BLE)
and displays information (like battery percentage, assist mode, gear number).
Because Mark published his project (code) on GitHub and the datafield did not work on my VivoActive 4 I started to investigate his work.
Searching for bugs I also started to change his code and had a peek in jim_m_58's code. The result is the code you see here.
THE BUG: there is no bug in Mark's code. The bug is somewhere in Garmin's CIQ software on some watches.
An CIQ app using BluetoothLowEnergie (BLE) can register up to 3 Bluetooth Profile Definitions.
On the VivoActive 4, and Venu watches, the registration fails for every 2nd and 3rd profile.
The result is that the app connects over BLE with the ebike but data is not exchanged and that is mistaken by users as an app failure.
This app will display an error message "ErrPrf_1" or "ErrPrf_2" where 1 and 2 are the failed number of registreations.
See the bug report and status at: https://forums.garmin.com/developer/connect-iq/i/bug-reports/vivoactive-4-bledelegate-onprofileregister-returns-status-value-2-on-every-2nd-and-3rd-registerprofile
This app is currently not released in the Garmin app store.
When you start developing for Garmin Connect IQ then don't forget to read this page:
https://forums.garmin.com/developer/connect-iq/w/wiki/4/new-developer-faq .
About
A data field allowing Garmin watches to show information about a Shimano STEPS ebike.
Topics
blebluetoothciqconnectdataebikeembnemtbenergyfieldgarmingarmin-connectiqlowshimanosteps
Resources
Readme
MIT license
Activity
Stars
6 stars
Watchers
1 watching
Forks
2 forks
Report repository
Packages
Contributors

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Force GitHub README to respect dark mode\n(function() {\n var style = document.createElement('style');\n style.textContent = '\n .markdown-body {\n color-scheme: dark light;\n }\n .markdown-body pre { background: #161b22 !important; }\n .markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }\n .markdown-body table th, .markdown-body table td { border-color: #30363d !important; }\n .markdown-body img { background: #0d1117; }\n .markdown-body blockquote { border-left-color: #8b949e; }\n .markdown-body hr { border-color: #30363d; }\n ';\n document.head.appendChild(style);\n})();", "GitHub Dark Mode README Fix");
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Latest commit
History
6 Commits
Folders and files
NameName
Last commit message
Last commit date
ebikeField
ebikeField
.gitignore
.gitignore
LICENSE
LICENSE
README.md
README.md
Repository files navigation
ebikeDataField
This project is a simple data field for Garmin watches, built using Garmin Connect IQ (CIQ).
This project was derived from Mark.Ai's project at https://github.com/markdotai/emtb which is released
in the Garmin app store here: https://apps.garmin.com/en-US/apps/461743f9-b350-486f-bd87-613c7b0bab90.
It allows your watch to connect to a a Shimano STEPS e-bike using Bluetooth Low Energy (BLE)
and displays information (like battery percentage, assist mode, gear number).
Because Mark published his project (code) on GitHub and the datafield did not work on my VivoActive 4 I started to investigate his work.
Searching for bugs I also started to change his code and had a peek in jim_m_58's code. The result is the code you see here.
THE BUG: there is no bug in Mark's code. The bug is somewhere in Garmin's CIQ software on some watches.
An CIQ app using BluetoothLowEnergie (BLE) can register up to 3 Bluetooth Profile Definitions.
On the VivoActive 4, and Venu watches, the registration fails for every 2nd and 3rd profile.
The result is that the app connects over BLE with the ebike but data is not exchanged and that is mistaken by users as an app failure.
This app will display an error message "ErrPrf_1" or "ErrPrf_2" where 1 and 2 are the failed number of registreations.
See the bug report and status at: https://forums.garmin.com/developer/connect-iq/i/bug-reports/vivoactive-4-bledelegate-onprofileregister-returns-status-value-2-on-every-2nd-and-3rd-registerprofile
This app is currently not released in the Garmin app store.
When you start developing for Garmin Connect IQ then don't forget to read this page:
https://forums.garmin.com/developer/connect-iq/w/wiki/4/new-developer-faq .
About
A data field allowing Garmin watches to show information about a Shimano STEPS ebike.
Topics
blebluetoothciqconnectdataebikeembnemtbenergyfieldgarmingarmin-connectiqlowshimanosteps
Resources
Readme
MIT license
Activity
Stars
6 stars
Watchers
1 watching
Forks
2 forks
Report repository
Packages
Contributors

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Highlight search terms from Google/DuckDuckGo/Bing referrer\n(function() {\n var ref = document.referrer;\n var terms = [];\n \n if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {\n var url = new URL(ref);\n var q = url.searchParams.get('q') || url.searchParams.get('p');\n if (q) {\n terms = q.split(/\\s+/).filter(function(t) { return t.length > 2; });\n }\n }\n \n if (terms.length === 0) return;\n \n var style = document.createElement('style');\n style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';\n document.head.appendChild(style);\n \n function highlight(node) {\n if (node.nodeType === 3) { // text node\n var text = node.textContent;\n var found = false;\n terms.forEach(function(term) {\n var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\\]\\\\]/g, '\\\\') + ')', 'gi');\n if (regex.test(text)) {\n found = true;\n var frag = document.createDocumentFragment();\n var parts = text.split(regex);\n parts.forEach(function(part, i) {\n if (i % 2 === 0) {\n frag.appendChild(document.createTextNode(part));\n } else {\n var span = document.createElement('span');\n span.className = 'userscript-highlight';\n span.textContent = part;\n frag.appendChild(span);\n }\n });\n node.parentNode.replaceChild(frag, node);\n }\n });\n } else if (node.nodeType === 1 && node.childNodes) { // element\n var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];\n if (!skipTags.includes(node.tagName)) {\n Array.from(node.childNodes).forEach(highlight);\n }\n }\n }\n \n highlight(document.body);\n \n // Re-highlight on dynamic content\n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1 || node.nodeType === 3) highlight(node);\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Highlight Search Terms");
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Latest commit
History
6 Commits
Folders and files
NameName
Last commit message
Last commit date
ebikeField
ebikeField
.gitignore
.gitignore
LICENSE
LICENSE
README.md
README.md
Repository files navigation
ebikeDataField
This project is a simple data field for Garmin watches, built using Garmin Connect IQ (CIQ).
This project was derived from Mark.Ai's project at https://github.com/markdotai/emtb which is released
in the Garmin app store here: https://apps.garmin.com/en-US/apps/461743f9-b350-486f-bd87-613c7b0bab90.
It allows your watch to connect to a a Shimano STEPS e-bike using Bluetooth Low Energy (BLE)
and displays information (like battery percentage, assist mode, gear number).
Because Mark published his project (code) on GitHub and the datafield did not work on my VivoActive 4 I started to investigate his work.
Searching for bugs I also started to change his code and had a peek in jim_m_58's code. The result is the code you see here.
THE BUG: there is no bug in Mark's code. The bug is somewhere in Garmin's CIQ software on some watches.
An CIQ app using BluetoothLowEnergie (BLE) can register up to 3 Bluetooth Profile Definitions.
On the VivoActive 4, and Venu watches, the registration fails for every 2nd and 3rd profile.
The result is that the app connects over BLE with the ebike but data is not exchanged and that is mistaken by users as an app failure.
This app will display an error message "ErrPrf_1" or "ErrPrf_2" where 1 and 2 are the failed number of registreations.
See the bug report and status at: https://forums.garmin.com/developer/connect-iq/i/bug-reports/vivoactive-4-bledelegate-onprofileregister-returns-status-value-2-on-every-2nd-and-3rd-registerprofile
This app is currently not released in the Garmin app store.
When you start developing for Garmin Connect IQ then don't forget to read this page:
https://forums.garmin.com/developer/connect-iq/w/wiki/4/new-developer-faq .
About
A data field allowing Garmin watches to show information about a Shimano STEPS ebike.
Topics
blebluetoothciqconnectdataebikeembnemtbenergyfieldgarmingarmin-connectiqlowshimanosteps
Resources
Readme
MIT license
Activity
Stars
6 stars
Watchers
1 watching
Forks
2 forks
Report repository
Packages
Contributors

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Strip utm_, fbclid, gclid, etc. from all links on page\n(function() {\n var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',\n 'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',\n 'ref', 'ref_src', 'source', 'medium', 'campaign'];\n \n function cleanUrl(url) {\n try {\n var u = new URL(url, window.location.origin);\n var changed = false;\n trackingParams.forEach(function(p) {\n if (u.searchParams.has(p)) {\n u.searchParams.delete(p);\n changed = true;\n }\n });\n return changed ? u.toString() : url;\n } catch (e) {\n return url;\n }\n }\n \n function cleanLinks() {\n document.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n \n cleanLinks();\n \n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1) {\n if (node.tagName === 'A') cleanLinks();\n node.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Remove Tracking Parameters from Links");
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content
BranchesTags
Latest commit
History
6 Commits
Folders and files
NameName
Last commit message
Last commit date
ebikeField
ebikeField
.gitignore
.gitignore
LICENSE
LICENSE
README.md
README.md
Repository files navigation
ebikeDataField
This project is a simple data field for Garmin watches, built using Garmin Connect IQ (CIQ).
This project was derived from Mark.Ai's project at https://github.com/markdotai/emtb which is released
in the Garmin app store here: https://apps.garmin.com/en-US/apps/461743f9-b350-486f-bd87-613c7b0bab90.
It allows your watch to connect to a a Shimano STEPS e-bike using Bluetooth Low Energy (BLE)
and displays information (like battery percentage, assist mode, gear number).
Because Mark published his project (code) on GitHub and the datafield did not work on my VivoActive 4 I started to investigate his work.
Searching for bugs I also started to change his code and had a peek in jim_m_58's code. The result is the code you see here.
THE BUG: there is no bug in Mark's code. The bug is somewhere in Garmin's CIQ software on some watches.
An CIQ app using BluetoothLowEnergie (BLE) can register up to 3 Bluetooth Profile Definitions.
On the VivoActive 4, and Venu watches, the registration fails for every 2nd and 3rd profile.
The result is that the app connects over BLE with the ebike but data is not exchanged and that is mistaken by users as an app failure.
This app will display an error message "ErrPrf_1" or "ErrPrf_2" where 1 and 2 are the failed number of registreations.
See the bug report and status at: https://forums.garmin.com/developer/connect-iq/i/bug-reports/vivoactive-4-bledelegate-onprofileregister-returns-status-value-2-on-every-2nd-and-3rd-registerprofile
This app is currently not released in the Garmin app store.
When you start developing for Garmin Connect IQ then don't forget to read this page:
https://forums.garmin.com/developer/connect-iq/w/wiki/4/new-developer-faq .
About
A data field allowing Garmin watches to show information about a Shimano STEPS ebike.
Topics
blebluetoothciqconnectdataebikeembnemtbenergyfieldgarmingarmin-connectiqlowshimanosteps
Resources
Readme
MIT license
Activity
Stars
6 stars
Watchers
1 watching
Forks
2 forks
Report repository
Packages
Contributors

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Auto-enable theater mode on YouTube\n(function() {\n function tryTheater() {\n var btn = document.querySelector('button[aria-label=\"Theater mode\"], ytd-player #player button[title=\"Theater mode\"]');\n if (btn && !btn.classList.contains('activated')) {\n btn.click();\n }\n }\n \n // Try immediately\n tryTheater();\n \n // Try after navigation (SPA)\n var lastUrl = location.href;\n setInterval(function() {\n if (location.href !== lastUrl) {\n lastUrl = location.href;\n setTimeout(tryTheater, 500);\n }\n }, 1000);\n \n // Also try on player load\n var observer = new MutationObserver(tryTheater);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "YouTube Theater Mode Default");
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Latest commit
History
6 Commits
Folders and files
NameName
Last commit message
Last commit date
ebikeField
ebikeField
.gitignore
.gitignore
LICENSE
LICENSE
README.md
README.md
Repository files navigation
ebikeDataField
This project is a simple data field for Garmin watches, built using Garmin Connect IQ (CIQ).
This project was derived from Mark.Ai's project at https://github.com/markdotai/emtb which is released
in the Garmin app store here: https://apps.garmin.com/en-US/apps/461743f9-b350-486f-bd87-613c7b0bab90.
It allows your watch to connect to a a Shimano STEPS e-bike using Bluetooth Low Energy (BLE)
and displays information (like battery percentage, assist mode, gear number).
Because Mark published his project (code) on GitHub and the datafield did not work on my VivoActive 4 I started to investigate his work.
Searching for bugs I also started to change his code and had a peek in jim_m_58's code. The result is the code you see here.
THE BUG: there is no bug in Mark's code. The bug is somewhere in Garmin's CIQ software on some watches.
An CIQ app using BluetoothLowEnergie (BLE) can register up to 3 Bluetooth Profile Definitions.
On the VivoActive 4, and Venu watches, the registration fails for every 2nd and 3rd profile.
The result is that the app connects over BLE with the ebike but data is not exchanged and that is mistaken by users as an app failure.
This app will display an error message "ErrPrf_1" or "ErrPrf_2" where 1 and 2 are the failed number of registreations.
See the bug report and status at: https://forums.garmin.com/developer/connect-iq/i/bug-reports/vivoactive-4-bledelegate-onprofileregister-returns-status-value-2-on-every-2nd-and-3rd-registerprofile
This app is currently not released in the Garmin app store.
When you start developing for Garmin Connect IQ then don't forget to read this page:
https://forums.garmin.com/developer/connect-iq/w/wiki/4/new-developer-faq .
About
A data field allowing Garmin watches to show information about a Shimano STEPS ebike.
Topics
blebluetoothciqconnectdataebikeembnemtbenergyfieldgarmingarmin-connectiqlowshimanosteps
Resources
Readme
MIT license
Activity
Stars
6 stars
Watchers
1 watching
Forks
2 forks
Report repository
Packages
Contributors

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Remove or un-stick sticky/fixed headers that block content\n(function() {\n function unstick() {\n document.querySelectorAll('header, nav, [role=\"banner\"], .header, .navbar, .sticky, .fixed-top, [style*=\"position: fixed\"], [style*=\"position:sticky\"]').forEach(function(el) {\n if (el.style.position === 'fixed' || el.style.position === 'sticky' || \n getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {\n el.style.position = 'static';\n el.style.top = 'auto';\n el.style.zIndex = 'auto';\n }\n });\n }\n \n unstick();\n \n var observer = new MutationObserver(unstick);\n observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });\n})();", "Kill Sticky Headers");
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Latest commit
History
6 Commits
Folders and files
NameName
Last commit message
Last commit date
ebikeField
ebikeField
.gitignore
.gitignore
LICENSE
LICENSE
README.md
README.md
Repository files navigation
ebikeDataField
This project is a simple data field for Garmin watches, built using Garmin Connect IQ (CIQ).
This project was derived from Mark.Ai's project at https://github.com/markdotai/emtb which is released
in the Garmin app store here: https://apps.garmin.com/en-US/apps/461743f9-b350-486f-bd87-613c7b0bab90.
It allows your watch to connect to a a Shimano STEPS e-bike using Bluetooth Low Energy (BLE)
and displays information (like battery percentage, assist mode, gear number).
Because Mark published his project (code) on GitHub and the datafield did not work on my VivoActive 4 I started to investigate his work.
Searching for bugs I also started to change his code and had a peek in jim_m_58's code. The result is the code you see here.
THE BUG: there is no bug in Mark's code. The bug is somewhere in Garmin's CIQ software on some watches.
An CIQ app using BluetoothLowEnergie (BLE) can register up to 3 Bluetooth Profile Definitions.
On the VivoActive 4, and Venu watches, the registration fails for every 2nd and 3rd profile.
The result is that the app connects over BLE with the ebike but data is not exchanged and that is mistaken by users as an app failure.
This app will display an error message "ErrPrf_1" or "ErrPrf_2" where 1 and 2 are the failed number of registreations.
See the bug report and status at: https://forums.garmin.com/developer/connect-iq/i/bug-reports/vivoactive-4-bledelegate-onprofileregister-returns-status-value-2-on-every-2nd-and-3rd-registerprofile
This app is currently not released in the Garmin app store.
When you start developing for Garmin Connect IQ then don't forget to read this page:
https://forums.garmin.com/developer/connect-iq/w/wiki/4/new-developer-faq .
About
A data field allowing Garmin watches to show information about a Shimano STEPS ebike.
Topics
blebluetoothciqconnectdataebikeembnemtbenergyfieldgarmingarmin-connectiqlowshimanosteps
Resources
Readme
MIT license
Activity
Stars
6 stars
Watchers
1 watching
Forks
2 forks
Report repository
Packages
Contributors

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Universal Dark Mode - works on any site\n(function() {\n var enabled = true;\n \n function applyDarkMode() {\n if (!enabled) return;\n \n // Create style element if it doesn't exist\n var style = document.getElementById('universal-dark-mode-style');\n if (!style) {\n style = document.createElement('style');\n style.id = 'universal-dark-mode-style';\n document.head.appendChild(style);\n }\n \n // Dark mode CSS - inverts colors but preserves images/video\n style.textContent = '\n /* Invert everything except media */\n html {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #1a1a2e !important;\n }\n \n /* Restore images, videos, iframes, canvas */\n img, video, iframe, canvas, svg, picture, [style*=\"background-image\"] {\n filter: invert(1) hue-rotate(180deg) !important;\n }\n \n /* Preserve specific elements that should not be inverted */\n .no-dark-mode, .no-dark-mode *,\n [data-theme=\"light\"], [data-theme=\"light\"],\n .ace_editor, .ace_editor *,\n .CodeMirror, .CodeMirror *,\n .monaco-editor, .monaco-editor *,\n .markdown-body pre, .markdown-body pre *,\n .highlight, .highlight *,\n pre code, pre code * {\n filter: none !important;\n }\n \n /* Fix common UI elements */\n .modal, .popup, .dropdown-menu, .tooltip, .popover {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #2d2d44 !important;\n border-color: #444 !important;\n }\n \n /* Scrollbars */\n ::-webkit-scrollbar { background: #1a1a2e !important; }\n ::-webkit-scrollbar-thumb { background: #444 !important; }\n ::-webkit-scrollbar-thumb:hover { background: #555 !important; }\n \n /* Selection */\n ::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ';\n }\n \n function removeDarkMode() {\n var style = document.getElementById('universal-dark-mode-style');\n if (style) style.remove();\n }\n \n // Toggle with Alt+Shift+D\n document.addEventListener('keydown', function(e) {\n if (e.altKey && e.shiftKey && e.key === 'D') {\n e.preventDefault();\n enabled = !enabled;\n if (enabled) {\n applyDarkMode();\n console.log('[Universal Dark Mode] Enabled');\n } else {\n removeDarkMode();\n console.log('[Universal Dark Mode] Disabled');\n }\n }\n });\n \n // Apply on load\n applyDarkMode();\n \n // Re-apply on dynamic content\n var observer = new MutationObserver(function(mutations) {\n if (enabled && !document.getElementById('universal-dark-mode-style')) {\n applyDarkMode();\n }\n });\n observer.observe(document.head, { childList: true });\n \n console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');\n})();", "Universal Dark Mode");
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content
BranchesTags
Latest commit
History
6 Commits
Folders and files
NameName
Last commit message
Last commit date
ebikeField
ebikeField
.gitignore
.gitignore
LICENSE
LICENSE
README.md
README.md
Repository files navigation
ebikeDataField
This project is a simple data field for Garmin watches, built using Garmin Connect IQ (CIQ).
This project was derived from Mark.Ai's project at https://github.com/markdotai/emtb which is released
in the Garmin app store here: https://apps.garmin.com/en-US/apps/461743f9-b350-486f-bd87-613c7b0bab90.
It allows your watch to connect to a a Shimano STEPS e-bike using Bluetooth Low Energy (BLE)
and displays information (like battery percentage, assist mode, gear number).
Because Mark published his project (code) on GitHub and the datafield did not work on my VivoActive 4 I started to investigate his work.
Searching for bugs I also started to change his code and had a peek in jim_m_58's code. The result is the code you see here.
THE BUG: there is no bug in Mark's code. The bug is somewhere in Garmin's CIQ software on some watches.
An CIQ app using BluetoothLowEnergie (BLE) can register up to 3 Bluetooth Profile Definitions.
On the VivoActive 4, and Venu watches, the registration fails for every 2nd and 3rd profile.
The result is that the app connects over BLE with the ebike but data is not exchanged and that is mistaken by users as an app failure.
This app will display an error message "ErrPrf_1" or "ErrPrf_2" where 1 and 2 are the failed number of registreations.
See the bug report and status at: https://forums.garmin.com/developer/connect-iq/i/bug-reports/vivoactive-4-bledelegate-onprofileregister-returns-status-value-2-on-every-2nd-and-3rd-registerprofile
This app is currently not released in the Garmin app store.
When you start developing for Garmin Connect IQ then don't forget to read this page:
https://forums.garmin.com/developer/connect-iq/w/wiki/4/new-developer-faq .
About
A data field allowing Garmin watches to show information about a Shimano STEPS ebike.
Topics
blebluetoothciqconnectdataebikeembnemtbenergyfieldgarmingarmin-connectiqlowshimanosteps
Resources
Readme
MIT license
Activity
Stars
6 stars
Watchers
1 watching
Forks
2 forks
Report repository
Packages
Contributors