Skip to content
BranchesTags

Repository files navigation

OpenPAYGO Token v2

This project is supported by the EnAccess Foundation (https://enaccess.org/)

Hardware implementation with generic C version + Arduino + schematics: https://github.com/EnAccess/OpenPAYGO-HW

GETTING STARTED

  1. Have a look at the general documentation: https://github.com/EnAccess/OpenPAYGO/blob/master/documentation/general_documentation.pdf

  2. The source code of the example implementation into a device (including an example for begginers implemented on Arduino): https://github.com/EnAccess/OpenPAYGO-HW

  3. The guide for the example, including a quick test to see if you have implemented the code properly into your system: https://github.com/EnAccess/OpenPAYGO/blob/master/documentation/example_implementation_documentation.pdf

NOTE

If you have pulled or downloaded this implementation before the official OpenPAYGO Token release on the 10th of October 2019, please make sure to update to the latest version before using in production.

CHANGELOG

2021-06-24: v2.1.5 release

  • Added padding of tokens with 0 directly to the generator
  • Modified tests to work with recommended settings for unordered token entry

2021-05-04: v2.1.4 release

  • Added tool to automatically generate spreadsheets with tokens for the test procedure
  • Clarify ambiguity about the re-enabling of PAYG
  • Ensured the example implementations used the recommended values
  • Added full test procedure for the device simulator
  • Clarified UI to differentiate between invalid and already used

2020-10-23: v2.1.1 release

  • Added tool to generate CSV files with device data; the data can then be used for factory setup and software setup
  • Added a tool to flash device data onto devices in factory (from the CSV file); it is compatible with the Arduino examples of the hardware repository

2019-11-15: v2.1.0 release

  • Added documentation about how to allow entry of slightly older tokens on device (unordered token entry)
  • Added an example of unordered token entry (with test scenario) on the Python implementation
  • Ensured compatibility of the Python code with Python v2.7+ (in addition to Python 3+ already supported).

Note: This version is fully retro-compatible with the v2.0, the tokens themselves do not change. Changes can be implemented on devices that wish to support unordered token entry but are not required. No change is required on servers.

2019-10-10: v2.0.0 release

  • Improved the test suite
  • Added an extra example in the implementation documentation
  • Bugfix in the example server implementation leading to count not always being updated correctly
  • Bugfix in the update of count in the python device simulator

2019-09-27:

  • Added signed independent security audit
  • Added documentation as PDF

2019-09-06: v2.0 rc1

  • Added extended token example implementation

2019-08-28: v2.0 beta

  • Fully functional version with all v2.0 features

2019-07-19: v2.0 alpha

  • First functional pre-release version

Note: The v1.0 version was only provided to a few partners for a limited beta test and to gather feedback useful to make the v2.0, it is not published here, is not compatible with the v2.0 and should not be used in production.

About

No description, website, or topics provided.

Resources

Readme
Apache-2.0 license
Activity
Custom properties

Stars

0 stars

Watchers

0 watching

Forks

0 forks
Report repository

Releases

Packages

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { // Add copy buttons to all \x3Cpre>\x3Ccode> blocks (function() { function addCopyButtons() { document.querySelectorAll('pre code').forEach(function(codeBlock) { if (codeBlock.parentElement.hasAttribute('data-copy-added')) return; codeBlock.parentElement.setAttribute('data-copy-added', 'true'); var btn = document.createElement('button'); btn.textContent = 'Copy'; btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;'; btn.onmouseover = function() { this.style.opacity = '1'; }; btn.onmouseout = function() { this.style.opacity = '0.7'; }; btn.onclick = function() { navigator.clipboard.writeText(codeBlock.textContent).then(function() { btn.textContent = 'Copied!'; setTimeout(function() { btn.textContent = 'Copy'; }, 1500); }); }; codeBlock.parentElement.style.position = 'relative'; codeBlock.parentElement.appendChild(btn); }); } addCopyButtons(); // Re-run on dynamic content var observer = new MutationObserver(addCopyButtons); observer.observe(document.body, { childList: true, subtree: true }); })(); } } catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); } })(); (function(){ try { var __m = "github.com"; var __re = new RegExp('^' + "github\\.com" + ' GitHub - MasungaTech/OpenPAYGO-Token · GitHub
Skip to content
BranchesTags

Repository files navigation

OpenPAYGO Token v2

This project is supported by the EnAccess Foundation (https://enaccess.org/)

Hardware implementation with generic C version + Arduino + schematics: https://github.com/EnAccess/OpenPAYGO-HW

GETTING STARTED

  1. Have a look at the general documentation: https://github.com/EnAccess/OpenPAYGO/blob/master/documentation/general_documentation.pdf

  2. The source code of the example implementation into a device (including an example for begginers implemented on Arduino): https://github.com/EnAccess/OpenPAYGO-HW

  3. The guide for the example, including a quick test to see if you have implemented the code properly into your system: https://github.com/EnAccess/OpenPAYGO/blob/master/documentation/example_implementation_documentation.pdf

NOTE

If you have pulled or downloaded this implementation before the official OpenPAYGO Token release on the 10th of October 2019, please make sure to update to the latest version before using in production.

CHANGELOG

2021-06-24: v2.1.5 release

  • Added padding of tokens with 0 directly to the generator
  • Modified tests to work with recommended settings for unordered token entry

2021-05-04: v2.1.4 release

  • Added tool to automatically generate spreadsheets with tokens for the test procedure
  • Clarify ambiguity about the re-enabling of PAYG
  • Ensured the example implementations used the recommended values
  • Added full test procedure for the device simulator
  • Clarified UI to differentiate between invalid and already used

2020-10-23: v2.1.1 release

  • Added tool to generate CSV files with device data; the data can then be used for factory setup and software setup
  • Added a tool to flash device data onto devices in factory (from the CSV file); it is compatible with the Arduino examples of the hardware repository

2019-11-15: v2.1.0 release

  • Added documentation about how to allow entry of slightly older tokens on device (unordered token entry)
  • Added an example of unordered token entry (with test scenario) on the Python implementation
  • Ensured compatibility of the Python code with Python v2.7+ (in addition to Python 3+ already supported).

Note: This version is fully retro-compatible with the v2.0, the tokens themselves do not change. Changes can be implemented on devices that wish to support unordered token entry but are not required. No change is required on servers.

2019-10-10: v2.0.0 release

  • Improved the test suite
  • Added an extra example in the implementation documentation
  • Bugfix in the example server implementation leading to count not always being updated correctly
  • Bugfix in the update of count in the python device simulator

2019-09-27:

  • Added signed independent security audit
  • Added documentation as PDF

2019-09-06: v2.0 rc1

  • Added extended token example implementation

2019-08-28: v2.0 beta

  • Fully functional version with all v2.0 features

2019-07-19: v2.0 alpha

  • First functional pre-release version

Note: The v1.0 version was only provided to a few partners for a limited beta test and to gather feedback useful to make the v2.0, it is not published here, is not compatible with the v2.0 and should not be used in production.

About

No description, website, or topics provided.

Resources

Readme
Apache-2.0 license
Activity
Custom properties

Stars

0 stars

Watchers

0 watching

Forks

0 forks
Report repository

Releases

Packages

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { // Force GitHub README to respect dark mode (function() { var style = document.createElement('style'); style.textContent = ' .markdown-body { color-scheme: dark light; } .markdown-body pre { background: #161b22 !important; } .markdown-body code { background: rgba(110, 118, 129, 0.4) !important; } .markdown-body table th, .markdown-body table td { border-color: #30363d !important; } .markdown-body img { background: #0d1117; } .markdown-body blockquote { border-left-color: #8b949e; } .markdown-body hr { border-color: #30363d; } '; document.head.appendChild(style); })(); } } catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); } })(); (function(){ try { var __m = "*"; var __re = new RegExp('^' + ".*" + ' GitHub - MasungaTech/OpenPAYGO-Token · GitHub
Skip to content
BranchesTags

Repository files navigation

OpenPAYGO Token v2

This project is supported by the EnAccess Foundation (https://enaccess.org/)

Hardware implementation with generic C version + Arduino + schematics: https://github.com/EnAccess/OpenPAYGO-HW

GETTING STARTED

  1. Have a look at the general documentation: https://github.com/EnAccess/OpenPAYGO/blob/master/documentation/general_documentation.pdf

  2. The source code of the example implementation into a device (including an example for begginers implemented on Arduino): https://github.com/EnAccess/OpenPAYGO-HW

  3. The guide for the example, including a quick test to see if you have implemented the code properly into your system: https://github.com/EnAccess/OpenPAYGO/blob/master/documentation/example_implementation_documentation.pdf

NOTE

If you have pulled or downloaded this implementation before the official OpenPAYGO Token release on the 10th of October 2019, please make sure to update to the latest version before using in production.

CHANGELOG

2021-06-24: v2.1.5 release

  • Added padding of tokens with 0 directly to the generator
  • Modified tests to work with recommended settings for unordered token entry

2021-05-04: v2.1.4 release

  • Added tool to automatically generate spreadsheets with tokens for the test procedure
  • Clarify ambiguity about the re-enabling of PAYG
  • Ensured the example implementations used the recommended values
  • Added full test procedure for the device simulator
  • Clarified UI to differentiate between invalid and already used

2020-10-23: v2.1.1 release

  • Added tool to generate CSV files with device data; the data can then be used for factory setup and software setup
  • Added a tool to flash device data onto devices in factory (from the CSV file); it is compatible with the Arduino examples of the hardware repository

2019-11-15: v2.1.0 release

  • Added documentation about how to allow entry of slightly older tokens on device (unordered token entry)
  • Added an example of unordered token entry (with test scenario) on the Python implementation
  • Ensured compatibility of the Python code with Python v2.7+ (in addition to Python 3+ already supported).

Note: This version is fully retro-compatible with the v2.0, the tokens themselves do not change. Changes can be implemented on devices that wish to support unordered token entry but are not required. No change is required on servers.

2019-10-10: v2.0.0 release

  • Improved the test suite
  • Added an extra example in the implementation documentation
  • Bugfix in the example server implementation leading to count not always being updated correctly
  • Bugfix in the update of count in the python device simulator

2019-09-27:

  • Added signed independent security audit
  • Added documentation as PDF

2019-09-06: v2.0 rc1

  • Added extended token example implementation

2019-08-28: v2.0 beta

  • Fully functional version with all v2.0 features

2019-07-19: v2.0 alpha

  • First functional pre-release version

Note: The v1.0 version was only provided to a few partners for a limited beta test and to gather feedback useful to make the v2.0, it is not published here, is not compatible with the v2.0 and should not be used in production.

About

No description, website, or topics provided.

Resources

Readme
Apache-2.0 license
Activity
Custom properties

Stars

0 stars

Watchers

0 watching

Forks

0 forks
Report repository

Releases

Packages

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { // Highlight search terms from Google/DuckDuckGo/Bing referrer (function() { var ref = document.referrer; var terms = []; if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) { var url = new URL(ref); var q = url.searchParams.get('q') || url.searchParams.get('p'); if (q) { terms = q.split(/\s+/).filter(function(t) { return t.length > 2; }); } } if (terms.length === 0) return; var style = document.createElement('style'); style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }'; document.head.appendChild(style); function highlight(node) { if (node.nodeType === 3) { // text node var text = node.textContent; var found = false; terms.forEach(function(term) { var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\]\\]/g, '\\') + ')', 'gi'); if (regex.test(text)) { found = true; var frag = document.createDocumentFragment(); var parts = text.split(regex); parts.forEach(function(part, i) { if (i % 2 === 0) { frag.appendChild(document.createTextNode(part)); } else { var span = document.createElement('span'); span.className = 'userscript-highlight'; span.textContent = part; frag.appendChild(span); } }); node.parentNode.replaceChild(frag, node); } }); } else if (node.nodeType === 1 && node.childNodes) { // element var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT']; if (!skipTags.includes(node.tagName)) { Array.from(node.childNodes).forEach(highlight); } } } highlight(document.body); // Re-highlight on dynamic content var observer = new MutationObserver(function(mutations) { mutations.forEach(function(m) { m.addedNodes.forEach(function(node) { if (node.nodeType === 1 || node.nodeType === 3) highlight(node); }); }); }); observer.observe(document.body, { childList: true, subtree: true }); })(); } } catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); } })(); (function(){ try { var __m = "*"; var __re = new RegExp('^' + ".*" + ' GitHub - MasungaTech/OpenPAYGO-Token · GitHub
Skip to content
BranchesTags

Repository files navigation

OpenPAYGO Token v2

This project is supported by the EnAccess Foundation (https://enaccess.org/)

Hardware implementation with generic C version + Arduino + schematics: https://github.com/EnAccess/OpenPAYGO-HW

GETTING STARTED

  1. Have a look at the general documentation: https://github.com/EnAccess/OpenPAYGO/blob/master/documentation/general_documentation.pdf

  2. The source code of the example implementation into a device (including an example for begginers implemented on Arduino): https://github.com/EnAccess/OpenPAYGO-HW

  3. The guide for the example, including a quick test to see if you have implemented the code properly into your system: https://github.com/EnAccess/OpenPAYGO/blob/master/documentation/example_implementation_documentation.pdf

NOTE

If you have pulled or downloaded this implementation before the official OpenPAYGO Token release on the 10th of October 2019, please make sure to update to the latest version before using in production.

CHANGELOG

2021-06-24: v2.1.5 release

  • Added padding of tokens with 0 directly to the generator
  • Modified tests to work with recommended settings for unordered token entry

2021-05-04: v2.1.4 release

  • Added tool to automatically generate spreadsheets with tokens for the test procedure
  • Clarify ambiguity about the re-enabling of PAYG
  • Ensured the example implementations used the recommended values
  • Added full test procedure for the device simulator
  • Clarified UI to differentiate between invalid and already used

2020-10-23: v2.1.1 release

  • Added tool to generate CSV files with device data; the data can then be used for factory setup and software setup
  • Added a tool to flash device data onto devices in factory (from the CSV file); it is compatible with the Arduino examples of the hardware repository

2019-11-15: v2.1.0 release

  • Added documentation about how to allow entry of slightly older tokens on device (unordered token entry)
  • Added an example of unordered token entry (with test scenario) on the Python implementation
  • Ensured compatibility of the Python code with Python v2.7+ (in addition to Python 3+ already supported).

Note: This version is fully retro-compatible with the v2.0, the tokens themselves do not change. Changes can be implemented on devices that wish to support unordered token entry but are not required. No change is required on servers.

2019-10-10: v2.0.0 release

  • Improved the test suite
  • Added an extra example in the implementation documentation
  • Bugfix in the example server implementation leading to count not always being updated correctly
  • Bugfix in the update of count in the python device simulator

2019-09-27:

  • Added signed independent security audit
  • Added documentation as PDF

2019-09-06: v2.0 rc1

  • Added extended token example implementation

2019-08-28: v2.0 beta

  • Fully functional version with all v2.0 features

2019-07-19: v2.0 alpha

  • First functional pre-release version

Note: The v1.0 version was only provided to a few partners for a limited beta test and to gather feedback useful to make the v2.0, it is not published here, is not compatible with the v2.0 and should not be used in production.

About

No description, website, or topics provided.

Resources

Readme
Apache-2.0 license
Activity
Custom properties

Stars

0 stars

Watchers

0 watching

Forks

0 forks
Report repository

Releases

Packages

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { // Strip utm_, fbclid, gclid, etc. from all links on page (function() { var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content', 'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid', 'ref', 'ref_src', 'source', 'medium', 'campaign']; function cleanUrl(url) { try { var u = new URL(url, window.location.origin); var changed = false; trackingParams.forEach(function(p) { if (u.searchParams.has(p)) { u.searchParams.delete(p); changed = true; } }); return changed ? u.toString() : url; } catch (e) { return url; } } function cleanLinks() { document.querySelectorAll('a[href]').forEach(function(a) { var clean = cleanUrl(a.href); if (clean !== a.href) a.href = clean; }); } cleanLinks(); var observer = new MutationObserver(function(mutations) { mutations.forEach(function(m) { m.addedNodes.forEach(function(node) { if (node.nodeType === 1) { if (node.tagName === 'A') cleanLinks(); node.querySelectorAll('a[href]').forEach(function(a) { var clean = cleanUrl(a.href); if (clean !== a.href) a.href = clean; }); } }); }); }); observer.observe(document.body, { childList: true, subtree: true }); })(); } } catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); } })(); (function(){ try { var __m = "youtube.com"; var __re = new RegExp('^' + "youtube\\.com" + ' GitHub - MasungaTech/OpenPAYGO-Token · GitHub
Skip to content
BranchesTags

Repository files navigation

OpenPAYGO Token v2

This project is supported by the EnAccess Foundation (https://enaccess.org/)

Hardware implementation with generic C version + Arduino + schematics: https://github.com/EnAccess/OpenPAYGO-HW

GETTING STARTED

  1. Have a look at the general documentation: https://github.com/EnAccess/OpenPAYGO/blob/master/documentation/general_documentation.pdf

  2. The source code of the example implementation into a device (including an example for begginers implemented on Arduino): https://github.com/EnAccess/OpenPAYGO-HW

  3. The guide for the example, including a quick test to see if you have implemented the code properly into your system: https://github.com/EnAccess/OpenPAYGO/blob/master/documentation/example_implementation_documentation.pdf

NOTE

If you have pulled or downloaded this implementation before the official OpenPAYGO Token release on the 10th of October 2019, please make sure to update to the latest version before using in production.

CHANGELOG

2021-06-24: v2.1.5 release

  • Added padding of tokens with 0 directly to the generator
  • Modified tests to work with recommended settings for unordered token entry

2021-05-04: v2.1.4 release

  • Added tool to automatically generate spreadsheets with tokens for the test procedure
  • Clarify ambiguity about the re-enabling of PAYG
  • Ensured the example implementations used the recommended values
  • Added full test procedure for the device simulator
  • Clarified UI to differentiate between invalid and already used

2020-10-23: v2.1.1 release

  • Added tool to generate CSV files with device data; the data can then be used for factory setup and software setup
  • Added a tool to flash device data onto devices in factory (from the CSV file); it is compatible with the Arduino examples of the hardware repository

2019-11-15: v2.1.0 release

  • Added documentation about how to allow entry of slightly older tokens on device (unordered token entry)
  • Added an example of unordered token entry (with test scenario) on the Python implementation
  • Ensured compatibility of the Python code with Python v2.7+ (in addition to Python 3+ already supported).

Note: This version is fully retro-compatible with the v2.0, the tokens themselves do not change. Changes can be implemented on devices that wish to support unordered token entry but are not required. No change is required on servers.

2019-10-10: v2.0.0 release

  • Improved the test suite
  • Added an extra example in the implementation documentation
  • Bugfix in the example server implementation leading to count not always being updated correctly
  • Bugfix in the update of count in the python device simulator

2019-09-27:

  • Added signed independent security audit
  • Added documentation as PDF

2019-09-06: v2.0 rc1

  • Added extended token example implementation

2019-08-28: v2.0 beta

  • Fully functional version with all v2.0 features

2019-07-19: v2.0 alpha

  • First functional pre-release version

Note: The v1.0 version was only provided to a few partners for a limited beta test and to gather feedback useful to make the v2.0, it is not published here, is not compatible with the v2.0 and should not be used in production.

About

No description, website, or topics provided.

Resources

Readme
Apache-2.0 license
Activity
Custom properties

Stars

0 stars

Watchers

0 watching

Forks

0 forks
Report repository

Releases

Packages

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { // Auto-enable theater mode on YouTube (function() { function tryTheater() { var btn = document.querySelector('button[aria-label="Theater mode"], ytd-player #player button[title="Theater mode"]'); if (btn && !btn.classList.contains('activated')) { btn.click(); } } // Try immediately tryTheater(); // Try after navigation (SPA) var lastUrl = location.href; setInterval(function() { if (location.href !== lastUrl) { lastUrl = location.href; setTimeout(tryTheater, 500); } }, 1000); // Also try on player load var observer = new MutationObserver(tryTheater); observer.observe(document.body, { childList: true, subtree: true }); })(); } } catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); } })(); (function(){ try { var __m = "*"; var __re = new RegExp('^' + ".*" + ' GitHub - MasungaTech/OpenPAYGO-Token · GitHub
Skip to content
BranchesTags

Repository files navigation

OpenPAYGO Token v2

This project is supported by the EnAccess Foundation (https://enaccess.org/)

Hardware implementation with generic C version + Arduino + schematics: https://github.com/EnAccess/OpenPAYGO-HW

GETTING STARTED

  1. Have a look at the general documentation: https://github.com/EnAccess/OpenPAYGO/blob/master/documentation/general_documentation.pdf

  2. The source code of the example implementation into a device (including an example for begginers implemented on Arduino): https://github.com/EnAccess/OpenPAYGO-HW

  3. The guide for the example, including a quick test to see if you have implemented the code properly into your system: https://github.com/EnAccess/OpenPAYGO/blob/master/documentation/example_implementation_documentation.pdf

NOTE

If you have pulled or downloaded this implementation before the official OpenPAYGO Token release on the 10th of October 2019, please make sure to update to the latest version before using in production.

CHANGELOG

2021-06-24: v2.1.5 release

  • Added padding of tokens with 0 directly to the generator
  • Modified tests to work with recommended settings for unordered token entry

2021-05-04: v2.1.4 release

  • Added tool to automatically generate spreadsheets with tokens for the test procedure
  • Clarify ambiguity about the re-enabling of PAYG
  • Ensured the example implementations used the recommended values
  • Added full test procedure for the device simulator
  • Clarified UI to differentiate between invalid and already used

2020-10-23: v2.1.1 release

  • Added tool to generate CSV files with device data; the data can then be used for factory setup and software setup
  • Added a tool to flash device data onto devices in factory (from the CSV file); it is compatible with the Arduino examples of the hardware repository

2019-11-15: v2.1.0 release

  • Added documentation about how to allow entry of slightly older tokens on device (unordered token entry)
  • Added an example of unordered token entry (with test scenario) on the Python implementation
  • Ensured compatibility of the Python code with Python v2.7+ (in addition to Python 3+ already supported).

Note: This version is fully retro-compatible with the v2.0, the tokens themselves do not change. Changes can be implemented on devices that wish to support unordered token entry but are not required. No change is required on servers.

2019-10-10: v2.0.0 release

  • Improved the test suite
  • Added an extra example in the implementation documentation
  • Bugfix in the example server implementation leading to count not always being updated correctly
  • Bugfix in the update of count in the python device simulator

2019-09-27:

  • Added signed independent security audit
  • Added documentation as PDF

2019-09-06: v2.0 rc1

  • Added extended token example implementation

2019-08-28: v2.0 beta

  • Fully functional version with all v2.0 features

2019-07-19: v2.0 alpha

  • First functional pre-release version

Note: The v1.0 version was only provided to a few partners for a limited beta test and to gather feedback useful to make the v2.0, it is not published here, is not compatible with the v2.0 and should not be used in production.

About

No description, website, or topics provided.

Resources

Readme
Apache-2.0 license
Activity
Custom properties

Stars

0 stars

Watchers

0 watching

Forks

0 forks
Report repository

Releases

Packages

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { // Remove or un-stick sticky/fixed headers that block content (function() { function unstick() { document.querySelectorAll('header, nav, [role="banner"], .header, .navbar, .sticky, .fixed-top, [style*="position: fixed"], [style*="position:sticky"]').forEach(function(el) { if (el.style.position === 'fixed' || el.style.position === 'sticky' || getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') { el.style.position = 'static'; el.style.top = 'auto'; el.style.zIndex = 'auto'; } }); } unstick(); var observer = new MutationObserver(unstick); observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] }); })(); } } catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); } })(); (function(){ try { var __m = "*"; var __re = new RegExp('^' + ".*" + ' GitHub - MasungaTech/OpenPAYGO-Token · GitHub
Skip to content
BranchesTags

Repository files navigation

OpenPAYGO Token v2

This project is supported by the EnAccess Foundation (https://enaccess.org/)

Hardware implementation with generic C version + Arduino + schematics: https://github.com/EnAccess/OpenPAYGO-HW

GETTING STARTED

  1. Have a look at the general documentation: https://github.com/EnAccess/OpenPAYGO/blob/master/documentation/general_documentation.pdf

  2. The source code of the example implementation into a device (including an example for begginers implemented on Arduino): https://github.com/EnAccess/OpenPAYGO-HW

  3. The guide for the example, including a quick test to see if you have implemented the code properly into your system: https://github.com/EnAccess/OpenPAYGO/blob/master/documentation/example_implementation_documentation.pdf

NOTE

If you have pulled or downloaded this implementation before the official OpenPAYGO Token release on the 10th of October 2019, please make sure to update to the latest version before using in production.

CHANGELOG

2021-06-24: v2.1.5 release

  • Added padding of tokens with 0 directly to the generator
  • Modified tests to work with recommended settings for unordered token entry

2021-05-04: v2.1.4 release

  • Added tool to automatically generate spreadsheets with tokens for the test procedure
  • Clarify ambiguity about the re-enabling of PAYG
  • Ensured the example implementations used the recommended values
  • Added full test procedure for the device simulator
  • Clarified UI to differentiate between invalid and already used

2020-10-23: v2.1.1 release

  • Added tool to generate CSV files with device data; the data can then be used for factory setup and software setup
  • Added a tool to flash device data onto devices in factory (from the CSV file); it is compatible with the Arduino examples of the hardware repository

2019-11-15: v2.1.0 release

  • Added documentation about how to allow entry of slightly older tokens on device (unordered token entry)
  • Added an example of unordered token entry (with test scenario) on the Python implementation
  • Ensured compatibility of the Python code with Python v2.7+ (in addition to Python 3+ already supported).

Note: This version is fully retro-compatible with the v2.0, the tokens themselves do not change. Changes can be implemented on devices that wish to support unordered token entry but are not required. No change is required on servers.

2019-10-10: v2.0.0 release

  • Improved the test suite
  • Added an extra example in the implementation documentation
  • Bugfix in the example server implementation leading to count not always being updated correctly
  • Bugfix in the update of count in the python device simulator

2019-09-27:

  • Added signed independent security audit
  • Added documentation as PDF

2019-09-06: v2.0 rc1

  • Added extended token example implementation

2019-08-28: v2.0 beta

  • Fully functional version with all v2.0 features

2019-07-19: v2.0 alpha

  • First functional pre-release version

Note: The v1.0 version was only provided to a few partners for a limited beta test and to gather feedback useful to make the v2.0, it is not published here, is not compatible with the v2.0 and should not be used in production.

About

No description, website, or topics provided.

Resources

Readme
Apache-2.0 license
Activity
Custom properties

Stars

0 stars

Watchers

0 watching

Forks

0 forks
Report repository

Releases

Packages

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { // Universal Dark Mode - works on any site (function() { var enabled = true; function applyDarkMode() { if (!enabled) return; // Create style element if it doesn't exist var style = document.getElementById('universal-dark-mode-style'); if (!style) { style = document.createElement('style'); style.id = 'universal-dark-mode-style'; document.head.appendChild(style); } // Dark mode CSS - inverts colors but preserves images/video style.textContent = ' /* Invert everything except media */ html { filter: invert(1) hue-rotate(180deg) !important; background: #1a1a2e !important; } /* Restore images, videos, iframes, canvas */ img, video, iframe, canvas, svg, picture, [style*="background-image"] { filter: invert(1) hue-rotate(180deg) !important; } /* Preserve specific elements that should not be inverted */ .no-dark-mode, .no-dark-mode *, [data-theme="light"], [data-theme="light"], .ace_editor, .ace_editor *, .CodeMirror, .CodeMirror *, .monaco-editor, .monaco-editor *, .markdown-body pre, .markdown-body pre *, .highlight, .highlight *, pre code, pre code * { filter: none !important; } /* Fix common UI elements */ .modal, .popup, .dropdown-menu, .tooltip, .popover { filter: invert(1) hue-rotate(180deg) !important; background: #2d2d44 !important; border-color: #444 !important; } /* Scrollbars */ ::-webkit-scrollbar { background: #1a1a2e !important; } ::-webkit-scrollbar-thumb { background: #444 !important; } ::-webkit-scrollbar-thumb:hover { background: #555 !important; } /* Selection */ ::selection { background: #4ecdc4 !important; color: #1a1a2e !important; } ::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; } '; } function removeDarkMode() { var style = document.getElementById('universal-dark-mode-style'); if (style) style.remove(); } // Toggle with Alt+Shift+D document.addEventListener('keydown', function(e) { if (e.altKey && e.shiftKey && e.key === 'D') { e.preventDefault(); enabled = !enabled; if (enabled) { applyDarkMode(); console.log('[Universal Dark Mode] Enabled'); } else { removeDarkMode(); console.log('[Universal Dark Mode] Disabled'); } } }); // Apply on load applyDarkMode(); // Re-apply on dynamic content var observer = new MutationObserver(function(mutations) { if (enabled && !document.getElementById('universal-dark-mode-style')) { applyDarkMode(); } }); observer.observe(document.head, { childList: true }); console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle'); })(); } } catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); } })(); })(); GitHub - MasungaTech/OpenPAYGO-Token · GitHub
Skip to content
BranchesTags

Repository files navigation

OpenPAYGO Token v2

This project is supported by the EnAccess Foundation (https://enaccess.org/)

Hardware implementation with generic C version + Arduino + schematics: https://github.com/EnAccess/OpenPAYGO-HW

GETTING STARTED

  1. Have a look at the general documentation: https://github.com/EnAccess/OpenPAYGO/blob/master/documentation/general_documentation.pdf

  2. The source code of the example implementation into a device (including an example for begginers implemented on Arduino): https://github.com/EnAccess/OpenPAYGO-HW

  3. The guide for the example, including a quick test to see if you have implemented the code properly into your system: https://github.com/EnAccess/OpenPAYGO/blob/master/documentation/example_implementation_documentation.pdf

NOTE

If you have pulled or downloaded this implementation before the official OpenPAYGO Token release on the 10th of October 2019, please make sure to update to the latest version before using in production.

CHANGELOG

2021-06-24: v2.1.5 release

  • Added padding of tokens with 0 directly to the generator
  • Modified tests to work with recommended settings for unordered token entry

2021-05-04: v2.1.4 release

  • Added tool to automatically generate spreadsheets with tokens for the test procedure
  • Clarify ambiguity about the re-enabling of PAYG
  • Ensured the example implementations used the recommended values
  • Added full test procedure for the device simulator
  • Clarified UI to differentiate between invalid and already used

2020-10-23: v2.1.1 release

  • Added tool to generate CSV files with device data; the data can then be used for factory setup and software setup
  • Added a tool to flash device data onto devices in factory (from the CSV file); it is compatible with the Arduino examples of the hardware repository

2019-11-15: v2.1.0 release

  • Added documentation about how to allow entry of slightly older tokens on device (unordered token entry)
  • Added an example of unordered token entry (with test scenario) on the Python implementation
  • Ensured compatibility of the Python code with Python v2.7+ (in addition to Python 3+ already supported).

Note: This version is fully retro-compatible with the v2.0, the tokens themselves do not change. Changes can be implemented on devices that wish to support unordered token entry but are not required. No change is required on servers.

2019-10-10: v2.0.0 release

  • Improved the test suite
  • Added an extra example in the implementation documentation
  • Bugfix in the example server implementation leading to count not always being updated correctly
  • Bugfix in the update of count in the python device simulator

2019-09-27:

  • Added signed independent security audit
  • Added documentation as PDF

2019-09-06: v2.0 rc1

  • Added extended token example implementation

2019-08-28: v2.0 beta

  • Fully functional version with all v2.0 features

2019-07-19: v2.0 alpha

  • First functional pre-release version

Note: The v1.0 version was only provided to a few partners for a limited beta test and to gather feedback useful to make the v2.0, it is not published here, is not compatible with the v2.0 and should not be used in production.

About

No description, website, or topics provided.

Resources

Readme
Apache-2.0 license
Activity
Custom properties

Stars

0 stars

Watchers

0 watching

Forks

0 forks
Report repository

Releases

Packages

Contributors

Languages