Setting stanby current

[salvadominguez]

I am trying to set the stanby_current, and although it says that is applied, the power supply shows that the current has not been modified. Its quite strange since the max_current changes correctly. Any idea what I'm doing wrong?

Thanks

from serial import Serial
from time import sleep
import pyTMCL

## serial-address as set on the TMCM module (Check on the TMCL-IDE).
MODULE_ADDRESS = 1

## Open the serial port (Check on the TMCL-IDE)
serial_port = Serial("/dev/tty.usbmodem1241")

## Create a Bus instance using the open serial port
bus = pyTMCL.connect(serial_port)

## Get the motor(ONLY ONE)
motor = bus.get_motor(MODULE_ADDRESS)



## Start of TMCL COMMANDS

motor.axis.stanby_current=200
motor.axis.max_current=230

print(motor.axis.stanby_current)



## Rotate motor left speed 1234 for 2 seconds
motor.rotate_left(1234)
sleep(2)
motor.stop()

## Rotate motor right speed 1234 for 2 seconds
motor.rotate_right(1234)
sleep(2)
motor.stop()