Uh oh!
There was an error while loading. Please reload this page.
[Python] support api key refresh in configuration module - #3594
Merged
Conversation
houqp
commented
Aug 8, 2019
ContributorAuthor
This is a port for swagger-api/swagger-codegen#9624. @Jyhess could you help take a look at this? |
houqpforce-pushed
the
refresh
branch
2 times, most recently
from
August 8, 2019 23:13
1b5d0aa to
e2104baComparewing328
commented
Aug 12, 2019
Member
wing328
commented
Aug 13, 2019
Member
@houqp thanks for the PR. Can you please resolve the merge conflicts when you've time? Thanks. |
wing328
commented
Aug 13, 2019
Member
@houqp would your enhancement work if there are more than 1 API key? |
houqp
commented
Aug 14, 2019
ContributorAuthor
@wing328 yes, it should work for multiple keys because the staleness check and refresh logic is managed through |
wing328
commented
Aug 15, 2019
Member
@houqp thanks for the explanation. Let's go with this approach to start with. |
wing328
commented
Aug 26, 2019
Member
@houqp thanks for the PR, which has been included in the v4.1.1 release: https://twitter.com/oas_generator/status/1165944867391860737 |
emenendez pushed a commit
to twitter-forks/python-base
that referenced
this pull request
Jul 23, 2021
…lient v11.0.0) This is a partial fix for kubernetes-client/python#741, based on the version of this repo included in `kubernetes-client` v11.0.0 (https://github.com/kubernetes-client/python/tree/v11.0.0). As described in kubernetes-client/python#741, some of the authentication schemes supported by Kubernetes require updating the client's credentials from time to time. The Kubernetes Python client currently does not support this, except for when using the `gcp` auth scheme. This is because the OpenAPI-generated code does not generally expect credentials to change after the client is configured. However, in OpenAPITools/openapi-generator#3594, the OpenAPI-generated code added a (undocumented) hook on the `Configuration` object which provides a method for the client credentials to be refreshed as needed. Unfortunately, this version of the Kubernetes client is too old to have that hook, but this patch adds it with a subclass of `Configuration`. Then the `load_kube_config()` function, used by the Kubernetes API to set up the `Configuration` object from the client's local k8s config, just needs to be updated to take advantage of this hook. This patch does this for `exec`-based authentication, which is a partial fix for kubernetes-client/python#741. The plan is to follow up to support this for all other authentication schemes which may require refreshing credentials. The follow-up patch will be based on the latest Kubernetes client and won't need the `Configuration` subclass. As noted above, `load_kube_config()` already has a special-case monkeypatch to refresh GCP tokens. I presume this functionality was added before the OpenAPI generator added support for the refresh hook. A complete fix will probably include refactoring the GCP token refreshing to use the new hook.
emenendez pushed a commit
to twitter-forks/python-base
that referenced
this pull request
Aug 27, 2021
This is a fix for kubernetes-client/python#741. As described in kubernetes-client/python#741, some of the authentication schemes supported by Kubernetes require updating the client's credentials from time to time. The Kubernetes Python client currently does not support this, except for when using the `gcp` auth scheme. This is because the OpenAPI-generated client code does not generally expect credentials to change after the client is configured. However, in OpenAPITools/openapi-generator#3594, the OpenAPI generator added a (undocumented) hook on the `Configuration` object which provides a method for the client credentials to be refreshed as needed. Now that this hook exists, the `load_kube_config()` function, used by the Kubernetes API to set up the `Configuration` object from the client's local k8s config, just needs to be updated to take advantage of this hook. This patch does this for `exec`-based authentication, which should resolvekubernetes-client/python#741. Also, as noted above, `load_kube_config()` already has a special-case monkeypatch to refresh GCP tokens. I presume this functionality was added before the OpenAPI generator added support for the refresh hook. This patch also refactors the GCP token refreshing code to use the new hook instead of the monkeypatch. Tests are also updated.
emenendez pushed a commit
to twitter-forks/python-base
that referenced
this pull request
Sep 3, 2021
This is a fix for kubernetes-client/python#741. As described in kubernetes-client/python#741, some of the authentication schemes supported by Kubernetes require updating the client's credentials from time to time. The Kubernetes Python client currently does not support this, except for when using the `gcp` auth scheme. This is because the OpenAPI-generated client code does not generally expect credentials to change after the client is configured. However, in OpenAPITools/openapi-generator#3594, the OpenAPI generator added a (undocumented) hook on the `Configuration` object which provides a method for the client credentials to be refreshed as needed. Now that this hook exists, the `load_kube_config()` function, used by the Kubernetes API to set up the `Configuration` object from the client's local k8s config, just needs to be updated to take advantage of this hook. This patch does this for `exec`-based authentication, which should resolvekubernetes-client/python#741. Also, as noted above, `load_kube_config()` already has a special-case monkeypatch to refresh GCP tokens. I presume this functionality was added before the OpenAPI generator added support for the refresh hook. This patch also refactors the GCP token refreshing code to use the new hook instead of the monkeypatch. Tests are also updated.
dudleyhunt86 added a commit
to dudleyhunt86/python-base-repository-build
that referenced
this pull request
Oct 7, 2022
This is a fix for kubernetes-client/python#741. As described in kubernetes-client/python#741, some of the authentication schemes supported by Kubernetes require updating the client's credentials from time to time. The Kubernetes Python client currently does not support this, except for when using the `gcp` auth scheme. This is because the OpenAPI-generated client code does not generally expect credentials to change after the client is configured. However, in OpenAPITools/openapi-generator#3594, the OpenAPI generator added a (undocumented) hook on the `Configuration` object which provides a method for the client credentials to be refreshed as needed. Now that this hook exists, the `load_kube_config()` function, used by the Kubernetes API to set up the `Configuration` object from the client's local k8s config, just needs to be updated to take advantage of this hook. This patch does this for `exec`-based authentication, which should resolvekubernetes-client/python#741. Also, as noted above, `load_kube_config()` already has a special-case monkeypatch to refresh GCP tokens. I presume this functionality was added before the OpenAPI generator added support for the refresh hook. This patch also refactors the GCP token refreshing code to use the new hook instead of the monkeypatch. Tests are also updated.
bh0717-dev pushed a commit
to bh0717-dev/python-dapp
that referenced
this pull request
Apr 1, 2024
This is a fix for kubernetes-client/python#741. As described in kubernetes-client/python#741, some of the authentication schemes supported by Kubernetes require updating the client's credentials from time to time. The Kubernetes Python client currently does not support this, except for when using the `gcp` auth scheme. This is because the OpenAPI-generated client code does not generally expect credentials to change after the client is configured. However, in OpenAPITools/openapi-generator#3594, the OpenAPI generator added a (undocumented) hook on the `Configuration` object which provides a method for the client credentials to be refreshed as needed. Now that this hook exists, the `load_kube_config()` function, used by the Kubernetes API to set up the `Configuration` object from the client's local k8s config, just needs to be updated to take advantage of this hook. This patch does this for `exec`-based authentication, which should resolvekubernetes-client/python#741. Also, as noted above, `load_kube_config()` already has a special-case monkeypatch to refresh GCP tokens. I presume this functionality was added before the OpenAPI generator added support for the refresh hook. This patch also refactors the GCP token refreshing code to use the new hook instead of the monkeypatch. Tests are also updated.
sdevtop100-dot added a commit
to sdevtop100-dot/python-kubernates
that referenced
this pull request
Feb 4, 2026
This is a fix for kubernetes-client/python#741. As described in kubernetes-client/python#741, some of the authentication schemes supported by Kubernetes require updating the client's credentials from time to time. The Kubernetes Python client currently does not support this, except for when using the `gcp` auth scheme. This is because the OpenAPI-generated client code does not generally expect credentials to change after the client is configured. However, in OpenAPITools/openapi-generator#3594, the OpenAPI generator added a (undocumented) hook on the `Configuration` object which provides a method for the client credentials to be refreshed as needed. Now that this hook exists, the `load_kube_config()` function, used by the Kubernetes API to set up the `Configuration` object from the client's local k8s config, just needs to be updated to take advantage of this hook. This patch does this for `exec`-based authentication, which should resolvekubernetes-client/python#741. Also, as noted above, `load_kube_config()` already has a special-case monkeypatch to refresh GCP tokens. I presume this functionality was added before the OpenAPI generator added support for the refresh hook. This patch also refactors the GCP token refreshing code to use the new hook instead of the monkeypatch. Tests are also updated.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment
2 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
PR checklist
./bin/to update Petstore sample so that CIs can verify the change. (For instance, only need to run./bin/{LANG}-petstore.sh,./bin/openapi3/{LANG}-petstore.shif updating the {LANG} (e.g. php, ruby, python, etc) code generator or {LANG} client's mustache templates). Windows batch files can be found in.\bin\windows\. If contributing template-only or documentation-only changes which will change sample output, be sure to build the project first.master,4.1.x,5.0.x. Default:master.Description of the PR
This PR adds a function hook to support refreshing expired api key. It is part of the fix for kubernetes-client/python#741.