Transfer Feature

Summary:

This CLI Feature is for transfering security tokens to another account.

How it works

1. This feature command takes three inputs:

• i. Your Token Symbol
• ii. The ETH address you want to transfer tokens to
• iii. The amount of tokens you want to transfer

2. Tokens are then transferred once the command is run.

How to Use this CLI Feature (Instructions):

To start, run the following command while inputting your own specific information in the < > brackets:

$ node CLI/polymath-cli transfer <tokenSymbol> <transferTo> <transferAmount> 

Example

 $ node CLI/polymath-cli transfer LFV 0x23f95b881149018e3240a6c98d4ec3a111adc5df 10

Token deployed at address 0xE447e88c37017550a9f85511cDaAEbC9529e845b.
---- Transaction executed: transfer - Gas limit provided: 67735 ----
Your transaction is being processed. Please wait...
TxHash: 0xbe78a11f1c7f4609f859036067202c94e71137082fa37983771bd4381f31e325
Congratulations! The transaction was successfully completed.
Gas used: 56446 - Gas spent: 0.0028223 Ether
Review it on Etherscan.
TxHash: 0x**be78a11f1c7f4609f859036067202c94e71137082fa37983771bd4381f31e325**
**Account 0x23f95b881149018E3240A6c98d4Ec3A111aDc5DF**
**transferre**d 10 tokens to account 0x23f95b881149018E3240A6c98d4Ec3A111aDc5DF

Above, 10 tokens were transferred to a selected address from another address (for simplicity, the two addresses in the example are the same)

Troubleshooting / FAQs

• If there is an error while processing the transfer transaction, the most probable cause for this error is one of the involved accounts not being in the whitelist or under a lockup period.