This project aims to provide numerical algorithms for ultrashort laser pulse measurement methods such as frequency-resolved optical gating (FROG), dispersion scan (d-scan), or time-domain ptychography (TDP) and more. Specifically, it provides a reference implementation of the algorithms presented in our paper "Common pulse retrieval algorithm: a fast and universal method to retrieve ultrashort pulses".
We decided to remove the implementation of dispersion scan from the publicly available code. If you want to use pypret for d-scan please contact us.
This code is a complete re-implentation of the (rather messy) code used in our research. It was created with the expressive purpose to be well-documented and educational. The notation in the code tries to match the notation in the paper and references it. I would strongly recommend reading the publication before diving into the code.
As a down-side the code is not optimized and on many occasions I deliberately decided to go with the less efficient but more expressive and straightforward solution. This pains me somewhat and I do not recommend to use the code as an example for high-performance, numerical Python. It creates unecessarily many temporal copies and re-calculates many values that could be stored.
The full documentation can be found at pypret.readthedocs.io. The scripts folder contains examples of how the package is used.
The code is contained in the plain Python package pypret (PYthon for Pulse Retrieval). Point your PYTHONPATH to it and you can use it. The package contains many classes that are in general useful for ultrashort pulse simulations. The most iconic usage, however, is to simulate pulse measurement schemes and perform pulse retrieval:
importnumpyasnpimportpypret# create simulation gridft=pypret.FourierTransform(256, dt=5.0e-15)
# instantiate a pulse object, central wavelength 800 nmpulse=pypret.Pulse(ft, 800e-9)
# create a random pulse with time-bandwidth product of 2.pypret.random_pulse(pulse, 2.0)
# plot the pulsepypret.PulsePlot(pulse)
# simulate a frog measurementdelay=np.linspace(-500e-15, 500e-15, 128) # delay in spnps=pypret.PNPS(pulse, "frog", "shg")
# calculate the measurement tracepnps.calculate(pulse.spectrum, delay)
original_spectrum=pulse.spectrum# and plot itpypret.MeshDataPlot(pnps.trace)
# and do the retrievalret=pypret.Retriever(pnps, "copra", verbose=True, maxiter=300)
# start with a Gaussian spectrum with random phase as initial guesspypret.random_gaussian(pulse, 50e-15, phase_max=0.0)
# now retrieve from the synthetic trace simulated aboveret.retrieve(pnps.trace, pulse.spectrum)
# and print the retrieval resultsret.result(original_spectrum)The text output should look similar to this:
Retrieval report
trace error R = 1.26951777571186456e-11
min. trace error R0 = 0.00000000000000000e+00
R - R0 = 1.26951777571186456e-11
pulse error ε = 1.52280811825410699e-07
This shows that the retrieval converged to the input trace within almost the numerical accuracy of the underlying calculations. This is, of course, only possible if no noise was added to the input data. Occasionally, the algorithm will not converge - in which case you would have to run it again.
More elaborate examples of how to use this package can be found in the scripts directory.
This project was developed by Nils C. Geib at the Institute of Applied Physics of the University of Jena, Germany.
For any questions or comments, you can contact me via email: nils.geib@uni-jena.de
This project is licensed under the MIT License - see the LICENSE file for details.