Remove SqlDataReader dependency from SqlServerGeometryTypeMapping

[Copilot]

The NetTopologySuite SQL Server provider had a hard dependency on SqlDataReader.GetSqlBytes(), preventing custom DbDataReader implementations injected via interceptors from reading geometry data.

Changes

• SqlServerGeometryTypeMapping.cs: Changed _getSqlBytes to use DbDataReader.GetFieldValue<SqlBytes>() instead of SqlDataReader.GetSqlBytes()
• SqlServerGeometryTypeMappingTests.cs: Added test verifying the method works with DbDataReader base class

Technical Details

Before:

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(SqlDataReader).GetRuntimeMethod(nameof(SqlDataReader.GetSqlBytes),[typeof(int)])!;

After:

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(DbDataReader).GetRuntimeMethod(nameof(DbDataReader.GetFieldValue),[typeof(int)])!.MakeGenericMethod(typeof(SqlBytes));

This follows the pattern already used by SqliteGeometryTypeMapping and aligns with the base RelationalTypeMapping implementation. The change maintains full backwards compatibility since SqlDataReader inherits GetFieldValue<T>() from DbDataReader.

Warning

Firewall rules blocked me from connecting to one or more addresses (expand for details)

I tried to connect to the following addresses, but was blocked by firewall rules:

• kijvsblobprodcus387.vsblob.vsassets.io
  • Triggering command: /home/REDACTED/work/efcore/efcore/.dotnet/dotnet dotnet build src/EFCore.SqlServer.NTS/EFCore.SqlServer.NTS.csproj --no-restore (dns block)
• m8dvsblobprodcus37.vsblob.vsassets.io
  • Triggering command: /home/REDACTED/work/efcore/efcore/.dotnet/dotnet /home/REDACTED/work/efcore/efcore/.dotnet/dotnet msbuild /m /nologo /clp:Summary /v:minimal /nr:false /warnaserror /p:TreatWarningsAsErrors=true /p:ContinuousIntegrationBuild=false /home/REDACTED/work/efcore/efcore/artifacts/toolset/restore.proj /t:__WriteToolsetLocation /clp:ErrorsOnly;NoSummary /p:__ToolsetLocationOutputFile=/home/REDACTED/work/efcore/efcore/artifacts/toolset/11.0.0-beta.25578.104.txt (dns block)
  • Triggering command: /home/REDACTED/work/efcore/efcore/.dotnet/dotnet dotnet build src/EFCore.SqlServer.NTS/EFCore.SqlServer.NTS.csproj --no-restore (dns block)

If you need me to access, download, or install something from one of these locations, you can either:

• Configure Actions setup steps to set up my environment, which run before the firewall is enabled
• Add the appropriate URLs or hosts to the custom allowlist in this repository's Copilot coding agent settings (admins only)

Original prompt

Problem

The Microsoft.EntityFrameworkCore.SqlServer.NetTopologySuite package currently has a hard dependency on SqlDataReader that prevents it from working with custom DbDataReader-derived classes injected via interceptors.

Current Issue

In src/EFCore.SqlServer.NTS/Storage/Internal/SqlServerGeometryTypeMapping.cs (lines 25-26 and 108-109):

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(SqlDataReader).GetRuntimeMethod(nameof(SqlDataReader.GetSqlBytes),[typeof(int)])!;publicoverrideMethodInfoGetDataReaderMethod()=>_getSqlBytes;

This code specifically references SqlDataReader.GetSqlBytes(), which means any custom DbDataReader implementation from interceptors will fail when trying to read geometry data because:

• The method is looked up on SqlDataReader specifically (not DbDataReader)
• Custom DbDataReader implementations won't have the GetSqlBytes method
• Casting to SqlDataReader would fail for custom implementations

Required Changes

Modify the SqlServerGeometryTypeMapping<TGeometry> class in src/EFCore.SqlServer.NTS/Storage/Internal/SqlServerGeometryTypeMapping.cs to work with DbDataReader instead of SqlDataReader:

1. Replace the SqlDataReader.GetSqlBytes method reference with DbDataReader.GetFieldValue<SqlBytes>
2. Update the _getSqlBytes field to reference the generic GetFieldValue method from DbDataReader
3. Ensure the GetDataReaderMethod() returns a method that works with any DbDataReader-derived class

The solution should use:

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(DbDataReader).GetRuntimeMethod(nameof(DbDataReader.GetFieldValue),[typeof(int)])!.MakeGenericMethod(typeof(SqlBytes));

This way, it will work with:

• Standard SqlDataReader
• Custom DbDataReader-derived classes from interceptors
• Any implementation that properly implements GetFieldValue<T>

Code Review Guidelines

• Check the IsDeleted flag when retrieving entities from the database
• Suggest removing code chunks that have been commented out
• Ignore changes to any mortar directories as this is auto-generated code

Goal

Enable the NetTopologySuite SQL Server provider to work seamlessly with custom DbDataReader implementations, allowing users to:

1. Use interceptors that inject custom DbDataReader-derived classes
2. Build this modified branch locally
3. Reference the DLL directly in their projects instead of the NuGet package

Files to Modify

• src/EFCore.SqlServer.NTS/Storage/Internal/SqlServerGeometryTypeMapping.cs
  • Line 25-26: Update the _getSqlBytes field initialization
  • Ensure line 108-109 continues to work correctly with the new method reference

This pull request was created from Copilot chat.

---

💡 You can make Copilot smarter by setting up custom instructions, customizing its development environment and configuring Model Context Protocol (MCP) servers. Learn more Copilot coding agent tips in the docs.

[Copilot]

The NetTopologySuite SQL Server provider had a hard dependency on SqlDataReader.GetSqlBytes(), preventing custom DbDataReader implementations injected via interceptors from reading geometry data.

Changes

• SqlServerGeometryTypeMapping.cs: Changed _getSqlBytes to use DbDataReader.GetFieldValue<SqlBytes>() instead of SqlDataReader.GetSqlBytes()
• SqlServerGeometryTypeMappingTests.cs: Added test verifying the method works with DbDataReader base class

Technical Details

Before:

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(SqlDataReader).GetRuntimeMethod(nameof(SqlDataReader.GetSqlBytes),[typeof(int)])!;

After:

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(DbDataReader).GetRuntimeMethod(nameof(DbDataReader.GetFieldValue),[typeof(int)])!.MakeGenericMethod(typeof(SqlBytes));

This follows the pattern already used by SqliteGeometryTypeMapping and aligns with the base RelationalTypeMapping implementation. The change maintains full backwards compatibility since SqlDataReader inherits GetFieldValue<T>() from DbDataReader.

Warning

Firewall rules blocked me from connecting to one or more addresses (expand for details)

I tried to connect to the following addresses, but was blocked by firewall rules:

• kijvsblobprodcus387.vsblob.vsassets.io
  • Triggering command: /home/REDACTED/work/efcore/efcore/.dotnet/dotnet dotnet build src/EFCore.SqlServer.NTS/EFCore.SqlServer.NTS.csproj --no-restore (dns block)
• m8dvsblobprodcus37.vsblob.vsassets.io
  • Triggering command: /home/REDACTED/work/efcore/efcore/.dotnet/dotnet /home/REDACTED/work/efcore/efcore/.dotnet/dotnet msbuild /m /nologo /clp:Summary /v:minimal /nr:false /warnaserror /p:TreatWarningsAsErrors=true /p:ContinuousIntegrationBuild=false /home/REDACTED/work/efcore/efcore/artifacts/toolset/restore.proj /t:__WriteToolsetLocation /clp:ErrorsOnly;NoSummary /p:__ToolsetLocationOutputFile=/home/REDACTED/work/efcore/efcore/artifacts/toolset/11.0.0-beta.25578.104.txt (dns block)
  • Triggering command: /home/REDACTED/work/efcore/efcore/.dotnet/dotnet dotnet build src/EFCore.SqlServer.NTS/EFCore.SqlServer.NTS.csproj --no-restore (dns block)

If you need me to access, download, or install something from one of these locations, you can either:

• Configure Actions setup steps to set up my environment, which run before the firewall is enabled
• Add the appropriate URLs or hosts to the custom allowlist in this repository's Copilot coding agent settings (admins only)

Original prompt

Problem

The Microsoft.EntityFrameworkCore.SqlServer.NetTopologySuite package currently has a hard dependency on SqlDataReader that prevents it from working with custom DbDataReader-derived classes injected via interceptors.

Current Issue

In src/EFCore.SqlServer.NTS/Storage/Internal/SqlServerGeometryTypeMapping.cs (lines 25-26 and 108-109):

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(SqlDataReader).GetRuntimeMethod(nameof(SqlDataReader.GetSqlBytes),[typeof(int)])!;publicoverrideMethodInfoGetDataReaderMethod()=>_getSqlBytes;

This code specifically references SqlDataReader.GetSqlBytes(), which means any custom DbDataReader implementation from interceptors will fail when trying to read geometry data because:

• The method is looked up on SqlDataReader specifically (not DbDataReader)
• Custom DbDataReader implementations won't have the GetSqlBytes method
• Casting to SqlDataReader would fail for custom implementations

Required Changes

Modify the SqlServerGeometryTypeMapping<TGeometry> class in src/EFCore.SqlServer.NTS/Storage/Internal/SqlServerGeometryTypeMapping.cs to work with DbDataReader instead of SqlDataReader:

1. Replace the SqlDataReader.GetSqlBytes method reference with DbDataReader.GetFieldValue<SqlBytes>
2. Update the _getSqlBytes field to reference the generic GetFieldValue method from DbDataReader
3. Ensure the GetDataReaderMethod() returns a method that works with any DbDataReader-derived class

The solution should use:

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(DbDataReader).GetRuntimeMethod(nameof(DbDataReader.GetFieldValue),[typeof(int)])!.MakeGenericMethod(typeof(SqlBytes));

This way, it will work with:

• Standard SqlDataReader
• Custom DbDataReader-derived classes from interceptors
• Any implementation that properly implements GetFieldValue<T>

Code Review Guidelines

• Check the IsDeleted flag when retrieving entities from the database
• Suggest removing code chunks that have been commented out
• Ignore changes to any mortar directories as this is auto-generated code

Goal

Enable the NetTopologySuite SQL Server provider to work seamlessly with custom DbDataReader implementations, allowing users to:

1. Use interceptors that inject custom DbDataReader-derived classes
2. Build this modified branch locally
3. Reference the DLL directly in their projects instead of the NuGet package

Files to Modify

• src/EFCore.SqlServer.NTS/Storage/Internal/SqlServerGeometryTypeMapping.cs
  • Line 25-26: Update the _getSqlBytes field initialization
  • Ensure line 108-109 continues to work correctly with the new method reference

This pull request was created from Copilot chat.

---

💡 You can make Copilot smarter by setting up custom instructions, customizing its development environment and configuring Model Context Protocol (MCP) servers. Learn more Copilot coding agent tips in the docs.

[Copilot]

The NetTopologySuite SQL Server provider had a hard dependency on SqlDataReader.GetSqlBytes(), preventing custom DbDataReader implementations injected via interceptors from reading geometry data.

Changes

• SqlServerGeometryTypeMapping.cs: Changed _getSqlBytes to use DbDataReader.GetFieldValue<SqlBytes>() instead of SqlDataReader.GetSqlBytes()
• SqlServerGeometryTypeMappingTests.cs: Added test verifying the method works with DbDataReader base class

Technical Details

Before:

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(SqlDataReader).GetRuntimeMethod(nameof(SqlDataReader.GetSqlBytes),[typeof(int)])!;

After:

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(DbDataReader).GetRuntimeMethod(nameof(DbDataReader.GetFieldValue),[typeof(int)])!.MakeGenericMethod(typeof(SqlBytes));

This follows the pattern already used by SqliteGeometryTypeMapping and aligns with the base RelationalTypeMapping implementation. The change maintains full backwards compatibility since SqlDataReader inherits GetFieldValue<T>() from DbDataReader.

Warning

Firewall rules blocked me from connecting to one or more addresses (expand for details)

I tried to connect to the following addresses, but was blocked by firewall rules:

• kijvsblobprodcus387.vsblob.vsassets.io
  • Triggering command: /home/REDACTED/work/efcore/efcore/.dotnet/dotnet dotnet build src/EFCore.SqlServer.NTS/EFCore.SqlServer.NTS.csproj --no-restore (dns block)
• m8dvsblobprodcus37.vsblob.vsassets.io
  • Triggering command: /home/REDACTED/work/efcore/efcore/.dotnet/dotnet /home/REDACTED/work/efcore/efcore/.dotnet/dotnet msbuild /m /nologo /clp:Summary /v:minimal /nr:false /warnaserror /p:TreatWarningsAsErrors=true /p:ContinuousIntegrationBuild=false /home/REDACTED/work/efcore/efcore/artifacts/toolset/restore.proj /t:__WriteToolsetLocation /clp:ErrorsOnly;NoSummary /p:__ToolsetLocationOutputFile=/home/REDACTED/work/efcore/efcore/artifacts/toolset/11.0.0-beta.25578.104.txt (dns block)
  • Triggering command: /home/REDACTED/work/efcore/efcore/.dotnet/dotnet dotnet build src/EFCore.SqlServer.NTS/EFCore.SqlServer.NTS.csproj --no-restore (dns block)

If you need me to access, download, or install something from one of these locations, you can either:

• Configure Actions setup steps to set up my environment, which run before the firewall is enabled
• Add the appropriate URLs or hosts to the custom allowlist in this repository's Copilot coding agent settings (admins only)

Original prompt

Problem

The Microsoft.EntityFrameworkCore.SqlServer.NetTopologySuite package currently has a hard dependency on SqlDataReader that prevents it from working with custom DbDataReader-derived classes injected via interceptors.

Current Issue

In src/EFCore.SqlServer.NTS/Storage/Internal/SqlServerGeometryTypeMapping.cs (lines 25-26 and 108-109):

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(SqlDataReader).GetRuntimeMethod(nameof(SqlDataReader.GetSqlBytes),[typeof(int)])!;publicoverrideMethodInfoGetDataReaderMethod()=>_getSqlBytes;

This code specifically references SqlDataReader.GetSqlBytes(), which means any custom DbDataReader implementation from interceptors will fail when trying to read geometry data because:

• The method is looked up on SqlDataReader specifically (not DbDataReader)
• Custom DbDataReader implementations won't have the GetSqlBytes method
• Casting to SqlDataReader would fail for custom implementations

Required Changes

Modify the SqlServerGeometryTypeMapping<TGeometry> class in src/EFCore.SqlServer.NTS/Storage/Internal/SqlServerGeometryTypeMapping.cs to work with DbDataReader instead of SqlDataReader:

1. Replace the SqlDataReader.GetSqlBytes method reference with DbDataReader.GetFieldValue<SqlBytes>
2. Update the _getSqlBytes field to reference the generic GetFieldValue method from DbDataReader
3. Ensure the GetDataReaderMethod() returns a method that works with any DbDataReader-derived class

The solution should use:

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(DbDataReader).GetRuntimeMethod(nameof(DbDataReader.GetFieldValue),[typeof(int)])!.MakeGenericMethod(typeof(SqlBytes));

This way, it will work with:

• Standard SqlDataReader
• Custom DbDataReader-derived classes from interceptors
• Any implementation that properly implements GetFieldValue<T>

Code Review Guidelines

• Check the IsDeleted flag when retrieving entities from the database
• Suggest removing code chunks that have been commented out
• Ignore changes to any mortar directories as this is auto-generated code

Goal

Enable the NetTopologySuite SQL Server provider to work seamlessly with custom DbDataReader implementations, allowing users to:

1. Use interceptors that inject custom DbDataReader-derived classes
2. Build this modified branch locally
3. Reference the DLL directly in their projects instead of the NuGet package

Files to Modify

• src/EFCore.SqlServer.NTS/Storage/Internal/SqlServerGeometryTypeMapping.cs
  • Line 25-26: Update the _getSqlBytes field initialization
  • Ensure line 108-109 continues to work correctly with the new method reference

This pull request was created from Copilot chat.

---

💡 You can make Copilot smarter by setting up custom instructions, customizing its development environment and configuring Model Context Protocol (MCP) servers. Learn more Copilot coding agent tips in the docs.

[Copilot]

The NetTopologySuite SQL Server provider had a hard dependency on SqlDataReader.GetSqlBytes(), preventing custom DbDataReader implementations injected via interceptors from reading geometry data.

Changes

• SqlServerGeometryTypeMapping.cs: Changed _getSqlBytes to use DbDataReader.GetFieldValue<SqlBytes>() instead of SqlDataReader.GetSqlBytes()
• SqlServerGeometryTypeMappingTests.cs: Added test verifying the method works with DbDataReader base class

Technical Details

Before:

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(SqlDataReader).GetRuntimeMethod(nameof(SqlDataReader.GetSqlBytes),[typeof(int)])!;

After:

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(DbDataReader).GetRuntimeMethod(nameof(DbDataReader.GetFieldValue),[typeof(int)])!.MakeGenericMethod(typeof(SqlBytes));

This follows the pattern already used by SqliteGeometryTypeMapping and aligns with the base RelationalTypeMapping implementation. The change maintains full backwards compatibility since SqlDataReader inherits GetFieldValue<T>() from DbDataReader.

Warning

Firewall rules blocked me from connecting to one or more addresses (expand for details)

I tried to connect to the following addresses, but was blocked by firewall rules:

• kijvsblobprodcus387.vsblob.vsassets.io
  • Triggering command: /home/REDACTED/work/efcore/efcore/.dotnet/dotnet dotnet build src/EFCore.SqlServer.NTS/EFCore.SqlServer.NTS.csproj --no-restore (dns block)
• m8dvsblobprodcus37.vsblob.vsassets.io
  • Triggering command: /home/REDACTED/work/efcore/efcore/.dotnet/dotnet /home/REDACTED/work/efcore/efcore/.dotnet/dotnet msbuild /m /nologo /clp:Summary /v:minimal /nr:false /warnaserror /p:TreatWarningsAsErrors=true /p:ContinuousIntegrationBuild=false /home/REDACTED/work/efcore/efcore/artifacts/toolset/restore.proj /t:__WriteToolsetLocation /clp:ErrorsOnly;NoSummary /p:__ToolsetLocationOutputFile=/home/REDACTED/work/efcore/efcore/artifacts/toolset/11.0.0-beta.25578.104.txt (dns block)
  • Triggering command: /home/REDACTED/work/efcore/efcore/.dotnet/dotnet dotnet build src/EFCore.SqlServer.NTS/EFCore.SqlServer.NTS.csproj --no-restore (dns block)

If you need me to access, download, or install something from one of these locations, you can either:

• Configure Actions setup steps to set up my environment, which run before the firewall is enabled
• Add the appropriate URLs or hosts to the custom allowlist in this repository's Copilot coding agent settings (admins only)

Original prompt

Problem

The Microsoft.EntityFrameworkCore.SqlServer.NetTopologySuite package currently has a hard dependency on SqlDataReader that prevents it from working with custom DbDataReader-derived classes injected via interceptors.

Current Issue

In src/EFCore.SqlServer.NTS/Storage/Internal/SqlServerGeometryTypeMapping.cs (lines 25-26 and 108-109):

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(SqlDataReader).GetRuntimeMethod(nameof(SqlDataReader.GetSqlBytes),[typeof(int)])!;publicoverrideMethodInfoGetDataReaderMethod()=>_getSqlBytes;

This code specifically references SqlDataReader.GetSqlBytes(), which means any custom DbDataReader implementation from interceptors will fail when trying to read geometry data because:

• The method is looked up on SqlDataReader specifically (not DbDataReader)
• Custom DbDataReader implementations won't have the GetSqlBytes method
• Casting to SqlDataReader would fail for custom implementations

Required Changes

Modify the SqlServerGeometryTypeMapping<TGeometry> class in src/EFCore.SqlServer.NTS/Storage/Internal/SqlServerGeometryTypeMapping.cs to work with DbDataReader instead of SqlDataReader:

1. Replace the SqlDataReader.GetSqlBytes method reference with DbDataReader.GetFieldValue<SqlBytes>
2. Update the _getSqlBytes field to reference the generic GetFieldValue method from DbDataReader
3. Ensure the GetDataReaderMethod() returns a method that works with any DbDataReader-derived class

The solution should use:

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(DbDataReader).GetRuntimeMethod(nameof(DbDataReader.GetFieldValue),[typeof(int)])!.MakeGenericMethod(typeof(SqlBytes));

This way, it will work with:

• Standard SqlDataReader
• Custom DbDataReader-derived classes from interceptors
• Any implementation that properly implements GetFieldValue<T>

Code Review Guidelines

• Check the IsDeleted flag when retrieving entities from the database
• Suggest removing code chunks that have been commented out
• Ignore changes to any mortar directories as this is auto-generated code

Goal

Enable the NetTopologySuite SQL Server provider to work seamlessly with custom DbDataReader implementations, allowing users to:

1. Use interceptors that inject custom DbDataReader-derived classes
2. Build this modified branch locally
3. Reference the DLL directly in their projects instead of the NuGet package

Files to Modify

• src/EFCore.SqlServer.NTS/Storage/Internal/SqlServerGeometryTypeMapping.cs
  • Line 25-26: Update the _getSqlBytes field initialization
  • Ensure line 108-109 continues to work correctly with the new method reference

This pull request was created from Copilot chat.

---

💡 You can make Copilot smarter by setting up custom instructions, customizing its development environment and configuring Model Context Protocol (MCP) servers. Learn more Copilot coding agent tips in the docs.

[Copilot]

The NetTopologySuite SQL Server provider had a hard dependency on SqlDataReader.GetSqlBytes(), preventing custom DbDataReader implementations injected via interceptors from reading geometry data.

Changes

• SqlServerGeometryTypeMapping.cs: Changed _getSqlBytes to use DbDataReader.GetFieldValue<SqlBytes>() instead of SqlDataReader.GetSqlBytes()
• SqlServerGeometryTypeMappingTests.cs: Added test verifying the method works with DbDataReader base class

Technical Details

Before:

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(SqlDataReader).GetRuntimeMethod(nameof(SqlDataReader.GetSqlBytes),[typeof(int)])!;

After:

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(DbDataReader).GetRuntimeMethod(nameof(DbDataReader.GetFieldValue),[typeof(int)])!.MakeGenericMethod(typeof(SqlBytes));

This follows the pattern already used by SqliteGeometryTypeMapping and aligns with the base RelationalTypeMapping implementation. The change maintains full backwards compatibility since SqlDataReader inherits GetFieldValue<T>() from DbDataReader.

Warning

Firewall rules blocked me from connecting to one or more addresses (expand for details)

I tried to connect to the following addresses, but was blocked by firewall rules:

• kijvsblobprodcus387.vsblob.vsassets.io
  • Triggering command: /home/REDACTED/work/efcore/efcore/.dotnet/dotnet dotnet build src/EFCore.SqlServer.NTS/EFCore.SqlServer.NTS.csproj --no-restore (dns block)
• m8dvsblobprodcus37.vsblob.vsassets.io
  • Triggering command: /home/REDACTED/work/efcore/efcore/.dotnet/dotnet /home/REDACTED/work/efcore/efcore/.dotnet/dotnet msbuild /m /nologo /clp:Summary /v:minimal /nr:false /warnaserror /p:TreatWarningsAsErrors=true /p:ContinuousIntegrationBuild=false /home/REDACTED/work/efcore/efcore/artifacts/toolset/restore.proj /t:__WriteToolsetLocation /clp:ErrorsOnly;NoSummary /p:__ToolsetLocationOutputFile=/home/REDACTED/work/efcore/efcore/artifacts/toolset/11.0.0-beta.25578.104.txt (dns block)
  • Triggering command: /home/REDACTED/work/efcore/efcore/.dotnet/dotnet dotnet build src/EFCore.SqlServer.NTS/EFCore.SqlServer.NTS.csproj --no-restore (dns block)

If you need me to access, download, or install something from one of these locations, you can either:

• Configure Actions setup steps to set up my environment, which run before the firewall is enabled
• Add the appropriate URLs or hosts to the custom allowlist in this repository's Copilot coding agent settings (admins only)

Original prompt

Problem

The Microsoft.EntityFrameworkCore.SqlServer.NetTopologySuite package currently has a hard dependency on SqlDataReader that prevents it from working with custom DbDataReader-derived classes injected via interceptors.

Current Issue

In src/EFCore.SqlServer.NTS/Storage/Internal/SqlServerGeometryTypeMapping.cs (lines 25-26 and 108-109):

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(SqlDataReader).GetRuntimeMethod(nameof(SqlDataReader.GetSqlBytes),[typeof(int)])!;publicoverrideMethodInfoGetDataReaderMethod()=>_getSqlBytes;

This code specifically references SqlDataReader.GetSqlBytes(), which means any custom DbDataReader implementation from interceptors will fail when trying to read geometry data because:

• The method is looked up on SqlDataReader specifically (not DbDataReader)
• Custom DbDataReader implementations won't have the GetSqlBytes method
• Casting to SqlDataReader would fail for custom implementations

Required Changes

Modify the SqlServerGeometryTypeMapping<TGeometry> class in src/EFCore.SqlServer.NTS/Storage/Internal/SqlServerGeometryTypeMapping.cs to work with DbDataReader instead of SqlDataReader:

1. Replace the SqlDataReader.GetSqlBytes method reference with DbDataReader.GetFieldValue<SqlBytes>
2. Update the _getSqlBytes field to reference the generic GetFieldValue method from DbDataReader
3. Ensure the GetDataReaderMethod() returns a method that works with any DbDataReader-derived class

The solution should use:

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(DbDataReader).GetRuntimeMethod(nameof(DbDataReader.GetFieldValue),[typeof(int)])!.MakeGenericMethod(typeof(SqlBytes));

This way, it will work with:

• Standard SqlDataReader
• Custom DbDataReader-derived classes from interceptors
• Any implementation that properly implements GetFieldValue<T>

Code Review Guidelines

• Check the IsDeleted flag when retrieving entities from the database
• Suggest removing code chunks that have been commented out
• Ignore changes to any mortar directories as this is auto-generated code

Goal

Enable the NetTopologySuite SQL Server provider to work seamlessly with custom DbDataReader implementations, allowing users to:

1. Use interceptors that inject custom DbDataReader-derived classes
2. Build this modified branch locally
3. Reference the DLL directly in their projects instead of the NuGet package

Files to Modify

• src/EFCore.SqlServer.NTS/Storage/Internal/SqlServerGeometryTypeMapping.cs
  • Line 25-26: Update the _getSqlBytes field initialization
  • Ensure line 108-109 continues to work correctly with the new method reference

This pull request was created from Copilot chat.

---

💡 You can make Copilot smarter by setting up custom instructions, customizing its development environment and configuring Model Context Protocol (MCP) servers. Learn more Copilot coding agent tips in the docs.

[Copilot]

The NetTopologySuite SQL Server provider had a hard dependency on SqlDataReader.GetSqlBytes(), preventing custom DbDataReader implementations injected via interceptors from reading geometry data.

Changes

• SqlServerGeometryTypeMapping.cs: Changed _getSqlBytes to use DbDataReader.GetFieldValue<SqlBytes>() instead of SqlDataReader.GetSqlBytes()
• SqlServerGeometryTypeMappingTests.cs: Added test verifying the method works with DbDataReader base class

Technical Details

Before:

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(SqlDataReader).GetRuntimeMethod(nameof(SqlDataReader.GetSqlBytes),[typeof(int)])!;

After:

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(DbDataReader).GetRuntimeMethod(nameof(DbDataReader.GetFieldValue),[typeof(int)])!.MakeGenericMethod(typeof(SqlBytes));

This follows the pattern already used by SqliteGeometryTypeMapping and aligns with the base RelationalTypeMapping implementation. The change maintains full backwards compatibility since SqlDataReader inherits GetFieldValue<T>() from DbDataReader.

Warning

Firewall rules blocked me from connecting to one or more addresses (expand for details)

I tried to connect to the following addresses, but was blocked by firewall rules:

• kijvsblobprodcus387.vsblob.vsassets.io
  • Triggering command: /home/REDACTED/work/efcore/efcore/.dotnet/dotnet dotnet build src/EFCore.SqlServer.NTS/EFCore.SqlServer.NTS.csproj --no-restore (dns block)
• m8dvsblobprodcus37.vsblob.vsassets.io
  • Triggering command: /home/REDACTED/work/efcore/efcore/.dotnet/dotnet /home/REDACTED/work/efcore/efcore/.dotnet/dotnet msbuild /m /nologo /clp:Summary /v:minimal /nr:false /warnaserror /p:TreatWarningsAsErrors=true /p:ContinuousIntegrationBuild=false /home/REDACTED/work/efcore/efcore/artifacts/toolset/restore.proj /t:__WriteToolsetLocation /clp:ErrorsOnly;NoSummary /p:__ToolsetLocationOutputFile=/home/REDACTED/work/efcore/efcore/artifacts/toolset/11.0.0-beta.25578.104.txt (dns block)
  • Triggering command: /home/REDACTED/work/efcore/efcore/.dotnet/dotnet dotnet build src/EFCore.SqlServer.NTS/EFCore.SqlServer.NTS.csproj --no-restore (dns block)

If you need me to access, download, or install something from one of these locations, you can either:

• Configure Actions setup steps to set up my environment, which run before the firewall is enabled
• Add the appropriate URLs or hosts to the custom allowlist in this repository's Copilot coding agent settings (admins only)

Original prompt

Problem

The Microsoft.EntityFrameworkCore.SqlServer.NetTopologySuite package currently has a hard dependency on SqlDataReader that prevents it from working with custom DbDataReader-derived classes injected via interceptors.

Current Issue

In src/EFCore.SqlServer.NTS/Storage/Internal/SqlServerGeometryTypeMapping.cs (lines 25-26 and 108-109):

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(SqlDataReader).GetRuntimeMethod(nameof(SqlDataReader.GetSqlBytes),[typeof(int)])!;publicoverrideMethodInfoGetDataReaderMethod()=>_getSqlBytes;

This code specifically references SqlDataReader.GetSqlBytes(), which means any custom DbDataReader implementation from interceptors will fail when trying to read geometry data because:

• The method is looked up on SqlDataReader specifically (not DbDataReader)
• Custom DbDataReader implementations won't have the GetSqlBytes method
• Casting to SqlDataReader would fail for custom implementations

Required Changes

Modify the SqlServerGeometryTypeMapping<TGeometry> class in src/EFCore.SqlServer.NTS/Storage/Internal/SqlServerGeometryTypeMapping.cs to work with DbDataReader instead of SqlDataReader:

1. Replace the SqlDataReader.GetSqlBytes method reference with DbDataReader.GetFieldValue<SqlBytes>
2. Update the _getSqlBytes field to reference the generic GetFieldValue method from DbDataReader
3. Ensure the GetDataReaderMethod() returns a method that works with any DbDataReader-derived class

The solution should use:

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(DbDataReader).GetRuntimeMethod(nameof(DbDataReader.GetFieldValue),[typeof(int)])!.MakeGenericMethod(typeof(SqlBytes));

This way, it will work with:

• Standard SqlDataReader
• Custom DbDataReader-derived classes from interceptors
• Any implementation that properly implements GetFieldValue<T>

Code Review Guidelines

• Check the IsDeleted flag when retrieving entities from the database
• Suggest removing code chunks that have been commented out
• Ignore changes to any mortar directories as this is auto-generated code

Goal

Enable the NetTopologySuite SQL Server provider to work seamlessly with custom DbDataReader implementations, allowing users to:

1. Use interceptors that inject custom DbDataReader-derived classes
2. Build this modified branch locally
3. Reference the DLL directly in their projects instead of the NuGet package

Files to Modify

• src/EFCore.SqlServer.NTS/Storage/Internal/SqlServerGeometryTypeMapping.cs
  • Line 25-26: Update the _getSqlBytes field initialization
  • Ensure line 108-109 continues to work correctly with the new method reference

This pull request was created from Copilot chat.

---

💡 You can make Copilot smarter by setting up custom instructions, customizing its development environment and configuring Model Context Protocol (MCP) servers. Learn more Copilot coding agent tips in the docs.

[Copilot]

The NetTopologySuite SQL Server provider had a hard dependency on SqlDataReader.GetSqlBytes(), preventing custom DbDataReader implementations injected via interceptors from reading geometry data.

Changes

• SqlServerGeometryTypeMapping.cs: Changed _getSqlBytes to use DbDataReader.GetFieldValue<SqlBytes>() instead of SqlDataReader.GetSqlBytes()
• SqlServerGeometryTypeMappingTests.cs: Added test verifying the method works with DbDataReader base class

Technical Details

Before:

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(SqlDataReader).GetRuntimeMethod(nameof(SqlDataReader.GetSqlBytes),[typeof(int)])!;

After:

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(DbDataReader).GetRuntimeMethod(nameof(DbDataReader.GetFieldValue),[typeof(int)])!.MakeGenericMethod(typeof(SqlBytes));

This follows the pattern already used by SqliteGeometryTypeMapping and aligns with the base RelationalTypeMapping implementation. The change maintains full backwards compatibility since SqlDataReader inherits GetFieldValue<T>() from DbDataReader.

Warning

Firewall rules blocked me from connecting to one or more addresses (expand for details)

I tried to connect to the following addresses, but was blocked by firewall rules:

• kijvsblobprodcus387.vsblob.vsassets.io
  • Triggering command: /home/REDACTED/work/efcore/efcore/.dotnet/dotnet dotnet build src/EFCore.SqlServer.NTS/EFCore.SqlServer.NTS.csproj --no-restore (dns block)
• m8dvsblobprodcus37.vsblob.vsassets.io
  • Triggering command: /home/REDACTED/work/efcore/efcore/.dotnet/dotnet /home/REDACTED/work/efcore/efcore/.dotnet/dotnet msbuild /m /nologo /clp:Summary /v:minimal /nr:false /warnaserror /p:TreatWarningsAsErrors=true /p:ContinuousIntegrationBuild=false /home/REDACTED/work/efcore/efcore/artifacts/toolset/restore.proj /t:__WriteToolsetLocation /clp:ErrorsOnly;NoSummary /p:__ToolsetLocationOutputFile=/home/REDACTED/work/efcore/efcore/artifacts/toolset/11.0.0-beta.25578.104.txt (dns block)
  • Triggering command: /home/REDACTED/work/efcore/efcore/.dotnet/dotnet dotnet build src/EFCore.SqlServer.NTS/EFCore.SqlServer.NTS.csproj --no-restore (dns block)

If you need me to access, download, or install something from one of these locations, you can either:

• Configure Actions setup steps to set up my environment, which run before the firewall is enabled
• Add the appropriate URLs or hosts to the custom allowlist in this repository's Copilot coding agent settings (admins only)

Original prompt

Problem

The Microsoft.EntityFrameworkCore.SqlServer.NetTopologySuite package currently has a hard dependency on SqlDataReader that prevents it from working with custom DbDataReader-derived classes injected via interceptors.

Current Issue

In src/EFCore.SqlServer.NTS/Storage/Internal/SqlServerGeometryTypeMapping.cs (lines 25-26 and 108-109):

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(SqlDataReader).GetRuntimeMethod(nameof(SqlDataReader.GetSqlBytes),[typeof(int)])!;publicoverrideMethodInfoGetDataReaderMethod()=>_getSqlBytes;

This code specifically references SqlDataReader.GetSqlBytes(), which means any custom DbDataReader implementation from interceptors will fail when trying to read geometry data because:

• The method is looked up on SqlDataReader specifically (not DbDataReader)
• Custom DbDataReader implementations won't have the GetSqlBytes method
• Casting to SqlDataReader would fail for custom implementations

Required Changes

Modify the SqlServerGeometryTypeMapping<TGeometry> class in src/EFCore.SqlServer.NTS/Storage/Internal/SqlServerGeometryTypeMapping.cs to work with DbDataReader instead of SqlDataReader:

1. Replace the SqlDataReader.GetSqlBytes method reference with DbDataReader.GetFieldValue<SqlBytes>
2. Update the _getSqlBytes field to reference the generic GetFieldValue method from DbDataReader
3. Ensure the GetDataReaderMethod() returns a method that works with any DbDataReader-derived class

The solution should use:

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(DbDataReader).GetRuntimeMethod(nameof(DbDataReader.GetFieldValue),[typeof(int)])!.MakeGenericMethod(typeof(SqlBytes));

This way, it will work with:

• Standard SqlDataReader
• Custom DbDataReader-derived classes from interceptors
• Any implementation that properly implements GetFieldValue<T>

Code Review Guidelines

• Check the IsDeleted flag when retrieving entities from the database
• Suggest removing code chunks that have been commented out
• Ignore changes to any mortar directories as this is auto-generated code

Goal

Enable the NetTopologySuite SQL Server provider to work seamlessly with custom DbDataReader implementations, allowing users to:

1. Use interceptors that inject custom DbDataReader-derived classes
2. Build this modified branch locally
3. Reference the DLL directly in their projects instead of the NuGet package

Files to Modify

• src/EFCore.SqlServer.NTS/Storage/Internal/SqlServerGeometryTypeMapping.cs
  • Line 25-26: Update the _getSqlBytes field initialization
  • Ensure line 108-109 continues to work correctly with the new method reference

This pull request was created from Copilot chat.

---

💡 You can make Copilot smarter by setting up custom instructions, customizing its development environment and configuring Model Context Protocol (MCP) servers. Learn more Copilot coding agent tips in the docs.

[Copilot]

The NetTopologySuite SQL Server provider had a hard dependency on SqlDataReader.GetSqlBytes(), preventing custom DbDataReader implementations injected via interceptors from reading geometry data.

Changes

• SqlServerGeometryTypeMapping.cs: Changed _getSqlBytes to use DbDataReader.GetFieldValue<SqlBytes>() instead of SqlDataReader.GetSqlBytes()
• SqlServerGeometryTypeMappingTests.cs: Added test verifying the method works with DbDataReader base class

Technical Details

Before:

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(SqlDataReader).GetRuntimeMethod(nameof(SqlDataReader.GetSqlBytes),[typeof(int)])!;

After:

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(DbDataReader).GetRuntimeMethod(nameof(DbDataReader.GetFieldValue),[typeof(int)])!.MakeGenericMethod(typeof(SqlBytes));

This follows the pattern already used by SqliteGeometryTypeMapping and aligns with the base RelationalTypeMapping implementation. The change maintains full backwards compatibility since SqlDataReader inherits GetFieldValue<T>() from DbDataReader.

Warning

Firewall rules blocked me from connecting to one or more addresses (expand for details)

I tried to connect to the following addresses, but was blocked by firewall rules:

• kijvsblobprodcus387.vsblob.vsassets.io
  • Triggering command: /home/REDACTED/work/efcore/efcore/.dotnet/dotnet dotnet build src/EFCore.SqlServer.NTS/EFCore.SqlServer.NTS.csproj --no-restore (dns block)
• m8dvsblobprodcus37.vsblob.vsassets.io
  • Triggering command: /home/REDACTED/work/efcore/efcore/.dotnet/dotnet /home/REDACTED/work/efcore/efcore/.dotnet/dotnet msbuild /m /nologo /clp:Summary /v:minimal /nr:false /warnaserror /p:TreatWarningsAsErrors=true /p:ContinuousIntegrationBuild=false /home/REDACTED/work/efcore/efcore/artifacts/toolset/restore.proj /t:__WriteToolsetLocation /clp:ErrorsOnly;NoSummary /p:__ToolsetLocationOutputFile=/home/REDACTED/work/efcore/efcore/artifacts/toolset/11.0.0-beta.25578.104.txt (dns block)
  • Triggering command: /home/REDACTED/work/efcore/efcore/.dotnet/dotnet dotnet build src/EFCore.SqlServer.NTS/EFCore.SqlServer.NTS.csproj --no-restore (dns block)

If you need me to access, download, or install something from one of these locations, you can either:

• Configure Actions setup steps to set up my environment, which run before the firewall is enabled
• Add the appropriate URLs or hosts to the custom allowlist in this repository's Copilot coding agent settings (admins only)

Original prompt

Problem

The Microsoft.EntityFrameworkCore.SqlServer.NetTopologySuite package currently has a hard dependency on SqlDataReader that prevents it from working with custom DbDataReader-derived classes injected via interceptors.

Current Issue

In src/EFCore.SqlServer.NTS/Storage/Internal/SqlServerGeometryTypeMapping.cs (lines 25-26 and 108-109):

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(SqlDataReader).GetRuntimeMethod(nameof(SqlDataReader.GetSqlBytes),[typeof(int)])!;publicoverrideMethodInfoGetDataReaderMethod()=>_getSqlBytes;

This code specifically references SqlDataReader.GetSqlBytes(), which means any custom DbDataReader implementation from interceptors will fail when trying to read geometry data because:

• The method is looked up on SqlDataReader specifically (not DbDataReader)
• Custom DbDataReader implementations won't have the GetSqlBytes method
• Casting to SqlDataReader would fail for custom implementations

Required Changes

Modify the SqlServerGeometryTypeMapping<TGeometry> class in src/EFCore.SqlServer.NTS/Storage/Internal/SqlServerGeometryTypeMapping.cs to work with DbDataReader instead of SqlDataReader:

1. Replace the SqlDataReader.GetSqlBytes method reference with DbDataReader.GetFieldValue<SqlBytes>
2. Update the _getSqlBytes field to reference the generic GetFieldValue method from DbDataReader
3. Ensure the GetDataReaderMethod() returns a method that works with any DbDataReader-derived class

The solution should use:

privatestaticreadonlyMethodInfo_getSqlBytes=typeof(DbDataReader).GetRuntimeMethod(nameof(DbDataReader.GetFieldValue),[typeof(int)])!.MakeGenericMethod(typeof(SqlBytes));

This way, it will work with:

• Standard SqlDataReader
• Custom DbDataReader-derived classes from interceptors
• Any implementation that properly implements GetFieldValue<T>

Code Review Guidelines

• Check the IsDeleted flag when retrieving entities from the database
• Suggest removing code chunks that have been commented out
• Ignore changes to any mortar directories as this is auto-generated code

Goal

Enable the NetTopologySuite SQL Server provider to work seamlessly with custom DbDataReader implementations, allowing users to:

1. Use interceptors that inject custom DbDataReader-derived classes
2. Build this modified branch locally
3. Reference the DLL directly in their projects instead of the NuGet package

Files to Modify

• src/EFCore.SqlServer.NTS/Storage/Internal/SqlServerGeometryTypeMapping.cs
  • Line 25-26: Update the _getSqlBytes field initialization
  • Ensure line 108-109 continues to work correctly with the new method reference

This pull request was created from Copilot chat.

---

💡 You can make Copilot smarter by setting up custom instructions, customizing its development environment and configuring Model Context Protocol (MCP) servers. Learn more Copilot coding agent tips in the docs.