BURNCAP 🧢 | ESP32 ONLY

1. Download the .bin, flash it to your ESP32.
2. Open your Serial Monitor to get your Board Token.
3. The firmware can only be run on registered boards.
4. You will only be given access to 3x version updates.
5. Check firmware review on TIKTOK: https://www.tiktok.com/@_imady

---

FEATURE

• Deauther
• Evil_Twin
• Beacon_Spam
• Prank mode
• Web Interface
• OLED view
• Custom username, password, and beacon names
• Bluetooth jammer

---

CAPTIVE PORTAL

Supported captive templates:

• Tenda
• Indihome
• TPLink
• Biznet

---

PINOUT

PIN	VSPI	HSPI	OLED
SCK	GPIO18	GPIO27	-
MOSI	GPIO23	GPIO13	-
MISO	GPIO19	GPIO12	-
CS	GPIO5	GPIO26	-
CE	GPIO4	GPIO14	-
SDA	-	-	GPIO21
SCL	-	-	GPIO22

---

PRICE

Rp.30.000 | Launching price — don't miss out