Fine-tuning large pretrained models is often prohibitively costly due to their scale. Parameter-Efficient Fine-Tuning (PEFT) methods enable efficient adaptation of large pretrained models to various downstream applications by only fine-tuning a small number of (extra) model parameters instead of all the model's parameters. This significantly decreases the computational and storage costs. Recent state-of-the-art PEFT techniques achieve performance comparable to fully fine-tuned models.
PEFT is integrated with Transformers for easy model training and inference, Diffusers for conveniently managing different adapters, and Accelerate for distributed training and inference for really big models.
Tip
Visit the PEFT organization to read about the PEFT methods implemented in the library and to see notebooks demonstrating how to apply these methods to a variety of downstream tasks. Click the "Watch repos" button on the organization page to be notified of newly implemented methods and notebooks!
Check the PEFT Adapters API Reference section for a list of supported PEFT methods, and read the Adapters, Soft prompts, and IA3 conceptual guides to learn more about how these methods work.
Install PEFT from pip:
pip install peftPrepare a model for training with a PEFT method such as LoRA by wrapping the base model and PEFT configuration with get_peft_model. For the bigscience/mt0-large model, you're only training 0.19% of the parameters!
fromtransformersimportAutoModelForCausalLMfrompeftimportLoraConfig, TaskType, get_peft_modeldevice=torch.accelerator.current_accelerator().typeifhasattr(torch, "accelerator") else"cuda"model_id="Qwen/Qwen2.5-3B-Instruct"model=AutoModelForCausalLM.from_pretrained(model_id, device_map=device)
peft_config=LoraConfig(
r=16,
lora_alpha=32,
task_type=TaskType.CAUSAL_LM,
# target_modules=["q_proj", "v_proj", ...] # optionally indicate target modules
)
model=get_peft_model(model, peft_config)
model.print_trainable_parameters()
# prints: trainable params: 3,686,400 || all params: 3,089,625,088 || trainable%: 0.1193# now perform training on your dataset, e.g. using transformers Trainer, then save the modelmodel.save_pretrained("qwen2.5-3b-lora")To load a PEFT model for inference:
fromtransformersimportAutoModelForCausalLM, AutoTokenizerfrompeftimportPeftModeldevice=torch.accelerator.current_accelerator().typeifhasattr(torch, "accelerator") else"cuda"model_id="Qwen/Qwen2.5-3B-Instruct"tokenizer=AutoTokenizer.from_pretrained(model_id)
model=AutoModelForCausalLM.from_pretrained(model_id, device_map=device)
model=PeftModel.from_pretrained(model, "qwen2.5-3b-lora")
inputs=tokenizer("Preheat the oven to 350 degrees and place the cookie dough", return_tensors="pt")
outputs=model.generate(**inputs.to(device), max_new_tokens=50)
print(tokenizer.decode(outputs[0], skip_special_tokens=True))
# prints something like: Preheat the oven to 350 degrees and place the cookie dough in a baking dish [...]There are many benefits of using PEFT but the main one is the huge savings in compute and storage, making PEFT applicable to many different use cases.
Consider the memory requirements for training the following models on the ought/raft/twitter_complaints dataset with an A100 80GB GPU with more than 64GB of CPU RAM.
| Model | Full Finetuning | PEFT-LoRA PyTorch | PEFT-LoRA DeepSpeed with CPU Offloading |
|---|---|---|---|
| bigscience/T0_3B (3B params) | 47.14GB GPU / 2.96GB CPU | 14.4GB GPU / 2.96GB CPU | 9.8GB GPU / 17.8GB CPU |
| bigscience/mt0-xxl (12B params) | OOM GPU | 56GB GPU / 3GB CPU | 22GB GPU / 52GB CPU |
| bigscience/bloomz-7b1 (7B params) | OOM GPU | 32GB GPU / 3.8GB CPU | 18.1GB GPU / 35GB CPU |
With LoRA you can fully finetune a 12B parameter model that would've otherwise run out of memory on the 80GB GPU, and comfortably fit and train a 3B parameter model. When you look at the 3B parameter model's performance, it is comparable to a fully finetuned model at a fraction of the GPU memory.
| Submission Name | Accuracy |
|---|---|
| Human baseline (crowdsourced) | 0.897 |
| Flan-T5 | 0.892 |
| lora-t0-3b | 0.863 |
Tip
The bigscience/T0_3B model performance isn't optimized in the table above. You can squeeze even more performance out of it by playing around with the input instruction templates, LoRA hyperparameters, and other training related hyperparameters. The final checkpoint size of this model is just 19MB compared to 11GB of the full bigscience/T0_3B model. Learn more about the advantages of finetuning with PEFT in this blog post.
Quantization is another method for reducing the memory requirements of a model by representing the data in a lower precision. It can be combined with PEFT methods to make it even easier to train and load LLMs for inference.
- Learn how to finetune meta-llama/Llama-2-7b-hf with QLoRA and the TRL library on a 16GB GPU in the Finetune LLMs on your own consumer hardware using tools from PyTorch and Hugging Face ecosystem blog post.
- Learn how to finetune a openai/whisper-large-v2 model for multilingual automatic speech recognition with LoRA and 8-bit quantization in this notebook (see this notebook instead for an example of streaming a dataset).
PEFT can help you save storage by avoiding full finetuning of models on each of downstream task or dataset. In many cases, you're only finetuning a very small fraction of a model's parameters and each checkpoint is only a few MBs in size (instead of GBs). These smaller PEFT adapters demonstrate performance comparable to a fully finetuned model. If you have many datasets, you can save a lot of storage with a PEFT model and not have to worry about catastrophic forgetting or overfitting the backbone or base model.
PEFT is widely supported across the Hugging Face ecosystem because of the massive efficiency it brings to training and inference.
The iterative diffusion process consumes a lot of memory which can make it difficult to train. PEFT can help reduce the memory requirements and reduce the storage size of the final model checkpoint. For example, consider the memory required for training a Stable Diffusion model with LoRA on an A100 80GB GPU with more than 64GB of CPU RAM. The final model checkpoint size is only 8.8MB!
| Model | Full Finetuning | PEFT-LoRA | PEFT-LoRA with Gradient Checkpointing |
|---|---|---|---|
| CompVis/stable-diffusion-v1-4 | 27.5GB GPU / 3.97GB CPU | 15.5GB GPU / 3.84GB CPU | 8.12GB GPU / 3.77GB CPU |
Tip
Take a look at the examples/lora_dreambooth/train_dreambooth.py training script to try training your own Stable Diffusion model with LoRA, and play around with the smangrul/peft-lora-sd-dreambooth Space which is running on a T4 instance. Learn more about the PEFT integration in Diffusers in this tutorial.
PEFT is directly integrated with Transformers. After loading a model, call add_adapter to add a new PEFT adapter to the model:
frompeftimportLoraConfigmodel= ... # transformers modelpeft_config=LoraConfig(...)
model.add_adapter(lora_config, adapter_name="lora_1")To load a trained PEFT adapter, call load_adapter:
model= ... # transformers modelmodel.load_adapter(<path-to-adapter>, adapter_name="lora_1")And to switch between different adapters, call set_adapter:
model.set_adapter("lora_2")The Transformers integration doesn't include all the functionalities offered in PEFT, such as methods for merging the adapter into the base model.
Accelerate is a library for distributed training and inference on various training setups and hardware (GPUs, TPUs, Apple Silicon, etc.). PEFT models work with Accelerate out of the box, making it really convenient to train really large models or use them for inference on consumer hardware with limited resources.
PEFT can also be applied to training LLMs with RLHF components such as the ranker and policy. Get started by reading:
- Fine-tune a Mistral-7b model with Direct Preference Optimization with PEFT and the TRL library to learn more about the Direct Preference Optimization (DPO) method and how to apply it to a LLM.
- Fine-tuning 20B LLMs with RLHF on a 24GB consumer GPU with PEFT and the TRL library, and then try out the gpt2-sentiment_peft.ipynb notebook to optimize GPT2 to generate positive movie reviews.
- StackLLaMA: A hands-on guide to train LLaMA with RLHF with PEFT, and then try out the stack_llama/scripts for supervised finetuning, reward modeling, and RL finetuning.
Use this Space or check out the docs to find which models officially support a PEFT method out of the box. Even if you don't see a model listed below, you can manually configure the model config to enable PEFT for a model. Read the New transformers architecture guide to learn how.
If you would like to contribute to PEFT, please check out our contribution guide.
To use 🤗 PEFT in your publication, please cite it by using the following BibTeX entry.
@Misc{peft,
title = {{PEFT}: State-of-the-art Parameter-Efficient Fine-Tuning methods},
author = {Sourab Mangrulkar and Sylvain Gugger and Lysandre Debut and Younes Belkada and Sayak Paul and Benjamin Bossan and Marian Tietz},
howpublished = {\url{https://github.com/huggingface/peft}},
year = {2022}
}