FEATURE: Ansible module to manage Stacki hosts - #846

Open
caladd wants to merge 1 commit into
developfrom
feature/ansible-stacki_host-module
Open

FEATURE: Ansible module to manage Stacki hosts#846
caladd wants to merge 1 commit into
developfrom
feature/ansible-stacki_host-module

Conversation

@caladd

@caladdcaladd commented Oct 21, 2020•
edited
Loading

Copy link
Copy Markdown
Contributor

An Ansible module for adding, editing, and removing Stacki hosts.

The module takes these parameters:

`name` - The name of the host to manage
`appliance` - The appliance used for the host
`box` - The box used for the host
`comment` - Freeform text to attach to the host
`environment` - Environment to assign the host
`groups` - List of groups to add or remove the host from. Each item has parameters:
`name` - The name of the group
`state` - If present, then a host will be added to this group.If absent, then the host will be removed from this group.
`installaction` - The install boot action for the host
`interfaces` - List of network interfaces for the host. Each item has parameters:
`channel` - Channel for this interface
`default` - Is the interface is the default for the hosts
`interface` - Device for this interface
`ip` - IP address for this interface
`name` - Logical name for this interface
`network` - Network attached to this interface
`mac` - Hardware MAC address for this interface
`module` - Device module for this interface
`options` - Module options for this interface
`vlan` - The VLAN ID for this interface
`state` - If present, then an interface will be added to the host, if needed, and options updates. If absent, then the interface will be removed from the host. If update_mac, then the interface device is used to update the mac. If update_interface, then the mac is used to update the interface device. Note: The interface device and mac are both used to match for updating an existing interface.
`osaction` - The os boot action for the host
`rack` - By convention, the number of the rack where the host is located
`rank` - By convention, the position of the host in the rack
`state` - If present, then a host will be added (if needed) and options are set to match. If absent, then the host will be removed.

Example playbook:

---
- hosts: localhost
tasks:
- name: Add a host
stacki_host:
name: test-backend
appliance: backend
box: default
comment: "test host"
groups:
- name: test
installaction: console
interfaces:
- default: true
interface: eth0
ip: "10.10.10.10"
mac: "00:11:22:33:44:55"
rack: "10"
rank: "4"
register: result
- name: Add host output
debug:
var: result
- name: Modify a host
stacki_host:
name: test-backend
groups:
- name: test
state: absent
installaction: default
interfaces:
- interface: eth0
state: absent
- interface: eth1
ip: "10.10.2.1"
mac: "11:22:33:44:55:66"
rack: "0"
rank: "0"
register: result
- name: Modify host output
debug:
var: result
- name: Remove a host
stacki_host:
name: test-backend
state: absent
register: result
- name: Remove host output
debug:
var: result

Output of the debug commands, showing the structure of the data returned:

TASK [Add host output] **************************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Modify host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Remove host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}

@caladd
FEATURE: Ansible module to manage Stacki hosts
2ff277a
An Ansible module for adding, editing, and removing Stacki hosts.
The module takes these parameters:
`name` - The name of the host to manage
`appliance` - The appliance used for the host
`box` - The box used for the host
`comment` - Freeform text to attach to the host
`environment` - Environment to assign the host
`groups` - List of groups to add or remove the host from. Each item has parameters:
`name` - The name of the group
`state` - If present, then a host will be added to this group.If absent, then the host will be removed from this group.
`installaction` - The install boot action for the host
`interfaces` - List of network interfaces for the host. Each item has parameters:
`channel` - Channel for this interface
`default` - Is the interface is the default for the hosts
`interface` - Device for this interface
`ip` - IP address for this interface
`name` - Logical name for this interface
`network` - Network attached to this interface
`mac` - Hardware MAC address for this interface
`module` - Device module for this interface
`options` - Module options for this interface
`vlan` - The VLAN ID for this interface
`state` - If present, then an interface will be added to the host, if needed, and options updates. If absent, then the interface will be removed from the host. If update_mac, then the interface device is used to update the mac. If update_interface, then the mac is used to update the interface device. Note: The interface device and mac are both used to match for updating an existing interface.
`osaction` - The os boot action for the host
`rack` - By convention, the number of the rack where the host is located
`rank` - By convention, the position of the host in the rack
`state` - If present, then a host will be added (if needed) and options are set to match. If absent, then the host will be removed.
Example playbook:
```
---
- hosts: localhost
tasks:
- name: Add a host
stacki_host:
name: test-backend
appliance: backend
box: default
comment: "test host"
groups:
- name: test
installaction: console
interfaces:
- default: true
interface: eth0
ip: "10.10.10.10"
mac: "00:11:22:33:44:55"
rack: "10"
rank: "4"
register: result
- name: Add host output
debug:
var: result
- name: Modify a host
stacki_host:
name: test-backend
groups:
- name: test
state: absent
installaction: default
interfaces:
- interface: eth0
state: absent
- interface: eth1
ip: "10.10.2.1"
mac: "11:22:33:44:55:66"
rack: "0"
rank: "0"
register: result
- name: Modify host output
debug:
var: result
- name: Remove a host
stacki_host:
name: test-backend
state: absent
register: result
- name: Remove host output
debug:
var: result
```
Output of the debug commands, showing the structure of the data returned:
```
TASK [Add host output] **************************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Modify host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Remove host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
```
langkurt
langkurt reviewed Oct 21, 2020
View reviewed changes
Comment threadcommon/src/stack/ansible/plugins/modules/stacki_host.py
if field in ("installaction", "osaction"):
run_stack_command(f"set.host.bootaction", [
module.params["name"],
f"type={field[:-6]}",

@langkurtlangkurtOct 21, 2020

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

clever

cjy008
cjy008 reviewed Oct 22, 2020
View reviewed changes
Comment threadtest-framework/test-suites/integration/files/ansible/add_host.yaml
@@ -0,0 +1,19 @@
---
- hosts: localhost
tasks:

@cjy008cjy008Oct 22, 2020

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Is this missing the state param? Or am I just tripping?

@caladdcaladdOct 22, 2020

Copy link
Copy Markdown
ContributorAuthor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

state defaults to present, which is the standard behavior for Ansible modules.

Sign up for freeto join this conversation on GitHub. Already have an account? Sign in to comment

Reviewers

@bsandersbsandersAwaiting requested review from bsanders
@megkidomegkidoAwaiting requested review from megkido
3 more reviewers
@cjy008cjy008cjy008 approved these changes
@langkurtlangkurtlangkurt approved these changes
@bgreenbbgreenbbgreenb approved these changes
Reviewers whose approvals may not affect merge requirements

Assignees

No one assigned

Labels

None yet

Projects

None yet

Milestone

No milestone

Development

Successfully merging this pull request may close these issues.

4 participants

@caladd@cjy008@langkurt@bgreenb
, 'i'); if (__m === '*' || __re.test(location.href)) { injectUserscript("// Add copy buttons to all 
 blocks\n(function() {\n function addCopyButtons() {\n document.querySelectorAll('pre code').forEach(function(codeBlock) {\n if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;\n codeBlock.parentElement.setAttribute('data-copy-added', 'true');\n \n var btn = document.createElement('button');\n btn.textContent = 'Copy';\n btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';\n btn.onmouseover = function() { this.style.opacity = '1'; };\n btn.onmouseout = function() { this.style.opacity = '0.7'; };\n btn.onclick = function() {\n navigator.clipboard.writeText(codeBlock.textContent).then(function() {\n btn.textContent = 'Copied!';\n setTimeout(function() { btn.textContent = 'Copy'; }, 1500);\n });\n };\n codeBlock.parentElement.style.position = 'relative';\n codeBlock.parentElement.appendChild(btn);\n });\n }\n \n addCopyButtons();\n \n // Re-run on dynamic content\n var observer = new MutationObserver(addCopyButtons);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Add Copy Buttons to Code Blocks");
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content
FEATURE: Ansible module to manage Stacki hosts - #846
Open
caladd wants to merge 1 commit into
developfrom 
feature/ansible-stacki_host-module
Open
FEATURE: Ansible module to manage Stacki hosts#846
caladd wants to merge 1 commit into
developfrom 
feature/ansible-stacki_host-module
Conversation
@caladd
@caladdcaladd
commented
Oct 21, 2020•

edited

Loading

Copy link


Copy Markdown

Contributor
An Ansible module for adding, editing, and removing Stacki hosts.
The module takes these parameters:
`name` - The name of the host to manage
`appliance` - The appliance used for the host
`box` - The box used for the host
`comment` - Freeform text to attach to the host
`environment` - Environment to assign the host
`groups` - List of groups to add or remove the host from. Each item has parameters:
`name` - The name of the group
`state` - If present, then a host will be added to this group.If absent, then the host will be removed from this group.
`installaction` - The install boot action for the host
`interfaces` - List of network interfaces for the host. Each item has parameters:
`channel` - Channel for this interface
`default` - Is the interface is the default for the hosts
`interface` - Device for this interface
`ip` - IP address for this interface
`name` - Logical name for this interface
`network` - Network attached to this interface
`mac` - Hardware MAC address for this interface
`module` - Device module for this interface
`options` - Module options for this interface
`vlan` - The VLAN ID for this interface
`state` - If present, then an interface will be added to the host, if needed, and options updates. If absent, then the interface will be removed from the host. If update_mac, then the interface device is used to update the mac. If update_interface, then the mac is used to update the interface device. Note: The interface device and mac are both used to match for updating an existing interface.
`osaction` - The os boot action for the host
`rack` - By convention, the number of the rack where the host is located
`rank` - By convention, the position of the host in the rack
`state` - If present, then a host will be added (if needed) and options are set to match. If absent, then the host will be removed.

Example playbook:
---
- hosts: localhost
tasks:
- name: Add a host
stacki_host:
name: test-backend
appliance: backend
box: default
comment: "test host"
groups:
- name: test
installaction: console
interfaces:
- default: true
interface: eth0
ip: "10.10.10.10"
mac: "00:11:22:33:44:55"
rack: "10"
rank: "4"
register: result
- name: Add host output
debug:
var: result
- name: Modify a host
stacki_host:
name: test-backend
groups:
- name: test
state: absent
installaction: default
interfaces:
- interface: eth0
state: absent
- interface: eth1
ip: "10.10.2.1"
mac: "11:22:33:44:55:66"
rack: "0"
rank: "0"
register: result
- name: Modify host output
debug:
var: result
- name: Remove a host
stacki_host:
name: test-backend
state: absent
register: result
- name: Remove host output
debug:
var: result

Output of the debug commands, showing the structure of the data returned:
TASK [Add host output] **************************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Modify host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Remove host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}

@caladd
FEATURE: Ansible module to manage Stacki hosts
2ff277a
An Ansible module for adding, editing, and removing Stacki hosts.
The module takes these parameters:
`name` - The name of the host to manage
`appliance` - The appliance used for the host
`box` - The box used for the host
`comment` - Freeform text to attach to the host
`environment` - Environment to assign the host
`groups` - List of groups to add or remove the host from. Each item has parameters:
`name` - The name of the group
`state` - If present, then a host will be added to this group.If absent, then the host will be removed from this group.
`installaction` - The install boot action for the host
`interfaces` - List of network interfaces for the host. Each item has parameters:
`channel` - Channel for this interface
`default` - Is the interface is the default for the hosts
`interface` - Device for this interface
`ip` - IP address for this interface
`name` - Logical name for this interface
`network` - Network attached to this interface
`mac` - Hardware MAC address for this interface
`module` - Device module for this interface
`options` - Module options for this interface
`vlan` - The VLAN ID for this interface
`state` - If present, then an interface will be added to the host, if needed, and options updates. If absent, then the interface will be removed from the host. If update_mac, then the interface device is used to update the mac. If update_interface, then the mac is used to update the interface device. Note: The interface device and mac are both used to match for updating an existing interface.
`osaction` - The os boot action for the host
`rack` - By convention, the number of the rack where the host is located
`rank` - By convention, the position of the host in the rack
`state` - If present, then a host will be added (if needed) and options are set to match. If absent, then the host will be removed.
Example playbook:
```
---
- hosts: localhost
tasks:
- name: Add a host
stacki_host:
name: test-backend
appliance: backend
box: default
comment: "test host"
groups:
- name: test
installaction: console
interfaces:
- default: true
interface: eth0
ip: "10.10.10.10"
mac: "00:11:22:33:44:55"
rack: "10"
rank: "4"
register: result
- name: Add host output
debug:
var: result
- name: Modify a host
stacki_host:
name: test-backend
groups:
- name: test
state: absent
installaction: default
interfaces:
- interface: eth0
state: absent
- interface: eth1
ip: "10.10.2.1"
mac: "11:22:33:44:55:66"
rack: "0"
rank: "0"
register: result
- name: Modify host output
debug:
var: result
- name: Remove a host
stacki_host:
name: test-backend
state: absent
register: result
- name: Remove host output
debug:
var: result
```
Output of the debug commands, showing the structure of the data returned:
```
TASK [Add host output] **************************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Modify host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Remove host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
```
langkurt
langkurt
reviewed
Oct 21, 2020
View reviewed changes
Comment threadcommon/src/stack/ansible/plugins/modules/stacki_host.py
 if field in ("installaction", "osaction"):
 run_stack_command(f"set.host.bootaction", [
 module.params["name"],
 f"type={field[:-6]}",
@langkurtlangkurtOct 21, 2020

Copy link


Copy Markdown

Contributor
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

clever
cjy008
cjy008
reviewed
Oct 22, 2020
View reviewed changes
Comment threadtest-framework/test-suites/integration/files/ansible/add_host.yaml
@@ -0,0 +1,19 @@
---
- hosts: localhost
 tasks:
@cjy008cjy008Oct 22, 2020

Copy link


Copy Markdown

Contributor
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Is this missing the state param? Or am I just tripping?
@caladdcaladdOct 22, 2020

Copy link


Copy Markdown

ContributorAuthor
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

state defaults to present, which is the standard behavior for Ansible modules.
Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers

@bsandersbsandersAwaiting requested review from bsanders
@megkidomegkidoAwaiting requested review from megkido

3 more reviewers

@cjy008cjy008cjy008 approved these changes
@langkurtlangkurtlangkurt approved these changes
@bgreenbbgreenbbgreenb approved these changes
Reviewers whose approvals may not affect merge requirements

Assignees


No one assigned


Labels


None yet


Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

4 participants

@caladd@cjy008@langkurt@bgreenb

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Force GitHub README to respect dark mode\n(function() {\n var style = document.createElement('style');\n style.textContent = '\n .markdown-body {\n color-scheme: dark light;\n }\n .markdown-body pre { background: #161b22 !important; }\n .markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }\n .markdown-body table th, .markdown-body table td { border-color: #30363d !important; }\n .markdown-body img { background: #0d1117; }\n .markdown-body blockquote { border-left-color: #8b949e; }\n .markdown-body hr { border-color: #30363d; }\n ';\n document.head.appendChild(style);\n})();", "GitHub Dark Mode README Fix");
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
FEATURE: Ansible module to manage Stacki hosts - #846
Open
caladd wants to merge 1 commit into
developfrom 
feature/ansible-stacki_host-module
Open
FEATURE: Ansible module to manage Stacki hosts#846
caladd wants to merge 1 commit into
developfrom 
feature/ansible-stacki_host-module
Conversation
@caladd
@caladdcaladd
commented
Oct 21, 2020•

edited

Loading

Copy link


Copy Markdown

Contributor
An Ansible module for adding, editing, and removing Stacki hosts.
The module takes these parameters:
`name` - The name of the host to manage
`appliance` - The appliance used for the host
`box` - The box used for the host
`comment` - Freeform text to attach to the host
`environment` - Environment to assign the host
`groups` - List of groups to add or remove the host from. Each item has parameters:
`name` - The name of the group
`state` - If present, then a host will be added to this group.If absent, then the host will be removed from this group.
`installaction` - The install boot action for the host
`interfaces` - List of network interfaces for the host. Each item has parameters:
`channel` - Channel for this interface
`default` - Is the interface is the default for the hosts
`interface` - Device for this interface
`ip` - IP address for this interface
`name` - Logical name for this interface
`network` - Network attached to this interface
`mac` - Hardware MAC address for this interface
`module` - Device module for this interface
`options` - Module options for this interface
`vlan` - The VLAN ID for this interface
`state` - If present, then an interface will be added to the host, if needed, and options updates. If absent, then the interface will be removed from the host. If update_mac, then the interface device is used to update the mac. If update_interface, then the mac is used to update the interface device. Note: The interface device and mac are both used to match for updating an existing interface.
`osaction` - The os boot action for the host
`rack` - By convention, the number of the rack where the host is located
`rank` - By convention, the position of the host in the rack
`state` - If present, then a host will be added (if needed) and options are set to match. If absent, then the host will be removed.

Example playbook:
---
- hosts: localhost
tasks:
- name: Add a host
stacki_host:
name: test-backend
appliance: backend
box: default
comment: "test host"
groups:
- name: test
installaction: console
interfaces:
- default: true
interface: eth0
ip: "10.10.10.10"
mac: "00:11:22:33:44:55"
rack: "10"
rank: "4"
register: result
- name: Add host output
debug:
var: result
- name: Modify a host
stacki_host:
name: test-backend
groups:
- name: test
state: absent
installaction: default
interfaces:
- interface: eth0
state: absent
- interface: eth1
ip: "10.10.2.1"
mac: "11:22:33:44:55:66"
rack: "0"
rank: "0"
register: result
- name: Modify host output
debug:
var: result
- name: Remove a host
stacki_host:
name: test-backend
state: absent
register: result
- name: Remove host output
debug:
var: result

Output of the debug commands, showing the structure of the data returned:
TASK [Add host output] **************************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Modify host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Remove host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}

@caladd
FEATURE: Ansible module to manage Stacki hosts
2ff277a
An Ansible module for adding, editing, and removing Stacki hosts.
The module takes these parameters:
`name` - The name of the host to manage
`appliance` - The appliance used for the host
`box` - The box used for the host
`comment` - Freeform text to attach to the host
`environment` - Environment to assign the host
`groups` - List of groups to add or remove the host from. Each item has parameters:
`name` - The name of the group
`state` - If present, then a host will be added to this group.If absent, then the host will be removed from this group.
`installaction` - The install boot action for the host
`interfaces` - List of network interfaces for the host. Each item has parameters:
`channel` - Channel for this interface
`default` - Is the interface is the default for the hosts
`interface` - Device for this interface
`ip` - IP address for this interface
`name` - Logical name for this interface
`network` - Network attached to this interface
`mac` - Hardware MAC address for this interface
`module` - Device module for this interface
`options` - Module options for this interface
`vlan` - The VLAN ID for this interface
`state` - If present, then an interface will be added to the host, if needed, and options updates. If absent, then the interface will be removed from the host. If update_mac, then the interface device is used to update the mac. If update_interface, then the mac is used to update the interface device. Note: The interface device and mac are both used to match for updating an existing interface.
`osaction` - The os boot action for the host
`rack` - By convention, the number of the rack where the host is located
`rank` - By convention, the position of the host in the rack
`state` - If present, then a host will be added (if needed) and options are set to match. If absent, then the host will be removed.
Example playbook:
```
---
- hosts: localhost
tasks:
- name: Add a host
stacki_host:
name: test-backend
appliance: backend
box: default
comment: "test host"
groups:
- name: test
installaction: console
interfaces:
- default: true
interface: eth0
ip: "10.10.10.10"
mac: "00:11:22:33:44:55"
rack: "10"
rank: "4"
register: result
- name: Add host output
debug:
var: result
- name: Modify a host
stacki_host:
name: test-backend
groups:
- name: test
state: absent
installaction: default
interfaces:
- interface: eth0
state: absent
- interface: eth1
ip: "10.10.2.1"
mac: "11:22:33:44:55:66"
rack: "0"
rank: "0"
register: result
- name: Modify host output
debug:
var: result
- name: Remove a host
stacki_host:
name: test-backend
state: absent
register: result
- name: Remove host output
debug:
var: result
```
Output of the debug commands, showing the structure of the data returned:
```
TASK [Add host output] **************************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Modify host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Remove host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
```
langkurt
langkurt
reviewed
Oct 21, 2020
View reviewed changes
Comment threadcommon/src/stack/ansible/plugins/modules/stacki_host.py
 if field in ("installaction", "osaction"):
 run_stack_command(f"set.host.bootaction", [
 module.params["name"],
 f"type={field[:-6]}",
@langkurtlangkurtOct 21, 2020

Copy link


Copy Markdown

Contributor
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

clever
cjy008
cjy008
reviewed
Oct 22, 2020
View reviewed changes
Comment threadtest-framework/test-suites/integration/files/ansible/add_host.yaml
@@ -0,0 +1,19 @@
---
- hosts: localhost
 tasks:
@cjy008cjy008Oct 22, 2020

Copy link


Copy Markdown

Contributor
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Is this missing the state param? Or am I just tripping?
@caladdcaladdOct 22, 2020

Copy link


Copy Markdown

ContributorAuthor
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

state defaults to present, which is the standard behavior for Ansible modules.
Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers

@bsandersbsandersAwaiting requested review from bsanders
@megkidomegkidoAwaiting requested review from megkido

3 more reviewers

@cjy008cjy008cjy008 approved these changes
@langkurtlangkurtlangkurt approved these changes
@bgreenbbgreenbbgreenb approved these changes
Reviewers whose approvals may not affect merge requirements

Assignees


No one assigned


Labels


None yet


Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

4 participants

@caladd@cjy008@langkurt@bgreenb

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Highlight search terms from Google/DuckDuckGo/Bing referrer\n(function() {\n var ref = document.referrer;\n var terms = [];\n \n if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {\n var url = new URL(ref);\n var q = url.searchParams.get('q') || url.searchParams.get('p');\n if (q) {\n terms = q.split(/\\s+/).filter(function(t) { return t.length > 2; });\n }\n }\n \n if (terms.length === 0) return;\n \n var style = document.createElement('style');\n style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';\n document.head.appendChild(style);\n \n function highlight(node) {\n if (node.nodeType === 3) { // text node\n var text = node.textContent;\n var found = false;\n terms.forEach(function(term) {\n var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\\]\\\\]/g, '\\\\') + ')', 'gi');\n if (regex.test(text)) {\n found = true;\n var frag = document.createDocumentFragment();\n var parts = text.split(regex);\n parts.forEach(function(part, i) {\n if (i % 2 === 0) {\n frag.appendChild(document.createTextNode(part));\n } else {\n var span = document.createElement('span');\n span.className = 'userscript-highlight';\n span.textContent = part;\n frag.appendChild(span);\n }\n });\n node.parentNode.replaceChild(frag, node);\n }\n });\n } else if (node.nodeType === 1 && node.childNodes) { // element\n var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];\n if (!skipTags.includes(node.tagName)) {\n Array.from(node.childNodes).forEach(highlight);\n }\n }\n }\n \n highlight(document.body);\n \n // Re-highlight on dynamic content\n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1 || node.nodeType === 3) highlight(node);\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Highlight Search Terms");
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
FEATURE: Ansible module to manage Stacki hosts - #846
Open
caladd wants to merge 1 commit into
developfrom 
feature/ansible-stacki_host-module
Open
FEATURE: Ansible module to manage Stacki hosts#846
caladd wants to merge 1 commit into
developfrom 
feature/ansible-stacki_host-module
Conversation
@caladd
@caladdcaladd
commented
Oct 21, 2020•

edited

Loading

Copy link


Copy Markdown

Contributor
An Ansible module for adding, editing, and removing Stacki hosts.
The module takes these parameters:
`name` - The name of the host to manage
`appliance` - The appliance used for the host
`box` - The box used for the host
`comment` - Freeform text to attach to the host
`environment` - Environment to assign the host
`groups` - List of groups to add or remove the host from. Each item has parameters:
`name` - The name of the group
`state` - If present, then a host will be added to this group.If absent, then the host will be removed from this group.
`installaction` - The install boot action for the host
`interfaces` - List of network interfaces for the host. Each item has parameters:
`channel` - Channel for this interface
`default` - Is the interface is the default for the hosts
`interface` - Device for this interface
`ip` - IP address for this interface
`name` - Logical name for this interface
`network` - Network attached to this interface
`mac` - Hardware MAC address for this interface
`module` - Device module for this interface
`options` - Module options for this interface
`vlan` - The VLAN ID for this interface
`state` - If present, then an interface will be added to the host, if needed, and options updates. If absent, then the interface will be removed from the host. If update_mac, then the interface device is used to update the mac. If update_interface, then the mac is used to update the interface device. Note: The interface device and mac are both used to match for updating an existing interface.
`osaction` - The os boot action for the host
`rack` - By convention, the number of the rack where the host is located
`rank` - By convention, the position of the host in the rack
`state` - If present, then a host will be added (if needed) and options are set to match. If absent, then the host will be removed.

Example playbook:
---
- hosts: localhost
tasks:
- name: Add a host
stacki_host:
name: test-backend
appliance: backend
box: default
comment: "test host"
groups:
- name: test
installaction: console
interfaces:
- default: true
interface: eth0
ip: "10.10.10.10"
mac: "00:11:22:33:44:55"
rack: "10"
rank: "4"
register: result
- name: Add host output
debug:
var: result
- name: Modify a host
stacki_host:
name: test-backend
groups:
- name: test
state: absent
installaction: default
interfaces:
- interface: eth0
state: absent
- interface: eth1
ip: "10.10.2.1"
mac: "11:22:33:44:55:66"
rack: "0"
rank: "0"
register: result
- name: Modify host output
debug:
var: result
- name: Remove a host
stacki_host:
name: test-backend
state: absent
register: result
- name: Remove host output
debug:
var: result

Output of the debug commands, showing the structure of the data returned:
TASK [Add host output] **************************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Modify host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Remove host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}

@caladd
FEATURE: Ansible module to manage Stacki hosts
2ff277a
An Ansible module for adding, editing, and removing Stacki hosts.
The module takes these parameters:
`name` - The name of the host to manage
`appliance` - The appliance used for the host
`box` - The box used for the host
`comment` - Freeform text to attach to the host
`environment` - Environment to assign the host
`groups` - List of groups to add or remove the host from. Each item has parameters:
`name` - The name of the group
`state` - If present, then a host will be added to this group.If absent, then the host will be removed from this group.
`installaction` - The install boot action for the host
`interfaces` - List of network interfaces for the host. Each item has parameters:
`channel` - Channel for this interface
`default` - Is the interface is the default for the hosts
`interface` - Device for this interface
`ip` - IP address for this interface
`name` - Logical name for this interface
`network` - Network attached to this interface
`mac` - Hardware MAC address for this interface
`module` - Device module for this interface
`options` - Module options for this interface
`vlan` - The VLAN ID for this interface
`state` - If present, then an interface will be added to the host, if needed, and options updates. If absent, then the interface will be removed from the host. If update_mac, then the interface device is used to update the mac. If update_interface, then the mac is used to update the interface device. Note: The interface device and mac are both used to match for updating an existing interface.
`osaction` - The os boot action for the host
`rack` - By convention, the number of the rack where the host is located
`rank` - By convention, the position of the host in the rack
`state` - If present, then a host will be added (if needed) and options are set to match. If absent, then the host will be removed.
Example playbook:
```
---
- hosts: localhost
tasks:
- name: Add a host
stacki_host:
name: test-backend
appliance: backend
box: default
comment: "test host"
groups:
- name: test
installaction: console
interfaces:
- default: true
interface: eth0
ip: "10.10.10.10"
mac: "00:11:22:33:44:55"
rack: "10"
rank: "4"
register: result
- name: Add host output
debug:
var: result
- name: Modify a host
stacki_host:
name: test-backend
groups:
- name: test
state: absent
installaction: default
interfaces:
- interface: eth0
state: absent
- interface: eth1
ip: "10.10.2.1"
mac: "11:22:33:44:55:66"
rack: "0"
rank: "0"
register: result
- name: Modify host output
debug:
var: result
- name: Remove a host
stacki_host:
name: test-backend
state: absent
register: result
- name: Remove host output
debug:
var: result
```
Output of the debug commands, showing the structure of the data returned:
```
TASK [Add host output] **************************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Modify host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Remove host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
```
langkurt
langkurt
reviewed
Oct 21, 2020
View reviewed changes
Comment threadcommon/src/stack/ansible/plugins/modules/stacki_host.py
 if field in ("installaction", "osaction"):
 run_stack_command(f"set.host.bootaction", [
 module.params["name"],
 f"type={field[:-6]}",
@langkurtlangkurtOct 21, 2020

Copy link


Copy Markdown

Contributor
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

clever
cjy008
cjy008
reviewed
Oct 22, 2020
View reviewed changes
Comment threadtest-framework/test-suites/integration/files/ansible/add_host.yaml
@@ -0,0 +1,19 @@
---
- hosts: localhost
 tasks:
@cjy008cjy008Oct 22, 2020

Copy link


Copy Markdown

Contributor
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Is this missing the state param? Or am I just tripping?
@caladdcaladdOct 22, 2020

Copy link


Copy Markdown

ContributorAuthor
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

state defaults to present, which is the standard behavior for Ansible modules.
Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers

@bsandersbsandersAwaiting requested review from bsanders
@megkidomegkidoAwaiting requested review from megkido

3 more reviewers

@cjy008cjy008cjy008 approved these changes
@langkurtlangkurtlangkurt approved these changes
@bgreenbbgreenbbgreenb approved these changes
Reviewers whose approvals may not affect merge requirements

Assignees


No one assigned


Labels


None yet


Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

4 participants

@caladd@cjy008@langkurt@bgreenb

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Strip utm_, fbclid, gclid, etc. from all links on page\n(function() {\n var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',\n 'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',\n 'ref', 'ref_src', 'source', 'medium', 'campaign'];\n \n function cleanUrl(url) {\n try {\n var u = new URL(url, window.location.origin);\n var changed = false;\n trackingParams.forEach(function(p) {\n if (u.searchParams.has(p)) {\n u.searchParams.delete(p);\n changed = true;\n }\n });\n return changed ? u.toString() : url;\n } catch (e) {\n return url;\n }\n }\n \n function cleanLinks() {\n document.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n \n cleanLinks();\n \n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1) {\n if (node.tagName === 'A') cleanLinks();\n node.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Remove Tracking Parameters from Links");
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content
FEATURE: Ansible module to manage Stacki hosts - #846
Open
caladd wants to merge 1 commit into
developfrom 
feature/ansible-stacki_host-module
Open
FEATURE: Ansible module to manage Stacki hosts#846
caladd wants to merge 1 commit into
developfrom 
feature/ansible-stacki_host-module
Conversation
@caladd
@caladdcaladd
commented
Oct 21, 2020•

edited

Loading

Copy link


Copy Markdown

Contributor
An Ansible module for adding, editing, and removing Stacki hosts.
The module takes these parameters:
`name` - The name of the host to manage
`appliance` - The appliance used for the host
`box` - The box used for the host
`comment` - Freeform text to attach to the host
`environment` - Environment to assign the host
`groups` - List of groups to add or remove the host from. Each item has parameters:
`name` - The name of the group
`state` - If present, then a host will be added to this group.If absent, then the host will be removed from this group.
`installaction` - The install boot action for the host
`interfaces` - List of network interfaces for the host. Each item has parameters:
`channel` - Channel for this interface
`default` - Is the interface is the default for the hosts
`interface` - Device for this interface
`ip` - IP address for this interface
`name` - Logical name for this interface
`network` - Network attached to this interface
`mac` - Hardware MAC address for this interface
`module` - Device module for this interface
`options` - Module options for this interface
`vlan` - The VLAN ID for this interface
`state` - If present, then an interface will be added to the host, if needed, and options updates. If absent, then the interface will be removed from the host. If update_mac, then the interface device is used to update the mac. If update_interface, then the mac is used to update the interface device. Note: The interface device and mac are both used to match for updating an existing interface.
`osaction` - The os boot action for the host
`rack` - By convention, the number of the rack where the host is located
`rank` - By convention, the position of the host in the rack
`state` - If present, then a host will be added (if needed) and options are set to match. If absent, then the host will be removed.

Example playbook:
---
- hosts: localhost
tasks:
- name: Add a host
stacki_host:
name: test-backend
appliance: backend
box: default
comment: "test host"
groups:
- name: test
installaction: console
interfaces:
- default: true
interface: eth0
ip: "10.10.10.10"
mac: "00:11:22:33:44:55"
rack: "10"
rank: "4"
register: result
- name: Add host output
debug:
var: result
- name: Modify a host
stacki_host:
name: test-backend
groups:
- name: test
state: absent
installaction: default
interfaces:
- interface: eth0
state: absent
- interface: eth1
ip: "10.10.2.1"
mac: "11:22:33:44:55:66"
rack: "0"
rank: "0"
register: result
- name: Modify host output
debug:
var: result
- name: Remove a host
stacki_host:
name: test-backend
state: absent
register: result
- name: Remove host output
debug:
var: result

Output of the debug commands, showing the structure of the data returned:
TASK [Add host output] **************************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Modify host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Remove host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}

@caladd
FEATURE: Ansible module to manage Stacki hosts
2ff277a
An Ansible module for adding, editing, and removing Stacki hosts.
The module takes these parameters:
`name` - The name of the host to manage
`appliance` - The appliance used for the host
`box` - The box used for the host
`comment` - Freeform text to attach to the host
`environment` - Environment to assign the host
`groups` - List of groups to add or remove the host from. Each item has parameters:
`name` - The name of the group
`state` - If present, then a host will be added to this group.If absent, then the host will be removed from this group.
`installaction` - The install boot action for the host
`interfaces` - List of network interfaces for the host. Each item has parameters:
`channel` - Channel for this interface
`default` - Is the interface is the default for the hosts
`interface` - Device for this interface
`ip` - IP address for this interface
`name` - Logical name for this interface
`network` - Network attached to this interface
`mac` - Hardware MAC address for this interface
`module` - Device module for this interface
`options` - Module options for this interface
`vlan` - The VLAN ID for this interface
`state` - If present, then an interface will be added to the host, if needed, and options updates. If absent, then the interface will be removed from the host. If update_mac, then the interface device is used to update the mac. If update_interface, then the mac is used to update the interface device. Note: The interface device and mac are both used to match for updating an existing interface.
`osaction` - The os boot action for the host
`rack` - By convention, the number of the rack where the host is located
`rank` - By convention, the position of the host in the rack
`state` - If present, then a host will be added (if needed) and options are set to match. If absent, then the host will be removed.
Example playbook:
```
---
- hosts: localhost
tasks:
- name: Add a host
stacki_host:
name: test-backend
appliance: backend
box: default
comment: "test host"
groups:
- name: test
installaction: console
interfaces:
- default: true
interface: eth0
ip: "10.10.10.10"
mac: "00:11:22:33:44:55"
rack: "10"
rank: "4"
register: result
- name: Add host output
debug:
var: result
- name: Modify a host
stacki_host:
name: test-backend
groups:
- name: test
state: absent
installaction: default
interfaces:
- interface: eth0
state: absent
- interface: eth1
ip: "10.10.2.1"
mac: "11:22:33:44:55:66"
rack: "0"
rank: "0"
register: result
- name: Modify host output
debug:
var: result
- name: Remove a host
stacki_host:
name: test-backend
state: absent
register: result
- name: Remove host output
debug:
var: result
```
Output of the debug commands, showing the structure of the data returned:
```
TASK [Add host output] **************************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Modify host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Remove host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
```
langkurt
langkurt
reviewed
Oct 21, 2020
View reviewed changes
Comment threadcommon/src/stack/ansible/plugins/modules/stacki_host.py
 if field in ("installaction", "osaction"):
 run_stack_command(f"set.host.bootaction", [
 module.params["name"],
 f"type={field[:-6]}",
@langkurtlangkurtOct 21, 2020

Copy link


Copy Markdown

Contributor
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

clever
cjy008
cjy008
reviewed
Oct 22, 2020
View reviewed changes
Comment threadtest-framework/test-suites/integration/files/ansible/add_host.yaml
@@ -0,0 +1,19 @@
---
- hosts: localhost
 tasks:
@cjy008cjy008Oct 22, 2020

Copy link


Copy Markdown

Contributor
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Is this missing the state param? Or am I just tripping?
@caladdcaladdOct 22, 2020

Copy link


Copy Markdown

ContributorAuthor
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

state defaults to present, which is the standard behavior for Ansible modules.
Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers

@bsandersbsandersAwaiting requested review from bsanders
@megkidomegkidoAwaiting requested review from megkido

3 more reviewers

@cjy008cjy008cjy008 approved these changes
@langkurtlangkurtlangkurt approved these changes
@bgreenbbgreenbbgreenb approved these changes
Reviewers whose approvals may not affect merge requirements

Assignees


No one assigned


Labels


None yet


Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

4 participants

@caladd@cjy008@langkurt@bgreenb

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Auto-enable theater mode on YouTube\n(function() {\n function tryTheater() {\n var btn = document.querySelector('button[aria-label=\"Theater mode\"], ytd-player #player button[title=\"Theater mode\"]');\n if (btn && !btn.classList.contains('activated')) {\n btn.click();\n }\n }\n \n // Try immediately\n tryTheater();\n \n // Try after navigation (SPA)\n var lastUrl = location.href;\n setInterval(function() {\n if (location.href !== lastUrl) {\n lastUrl = location.href;\n setTimeout(tryTheater, 500);\n }\n }, 1000);\n \n // Also try on player load\n var observer = new MutationObserver(tryTheater);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "YouTube Theater Mode Default");
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
FEATURE: Ansible module to manage Stacki hosts - #846
Open
caladd wants to merge 1 commit into
developfrom 
feature/ansible-stacki_host-module
Open
FEATURE: Ansible module to manage Stacki hosts#846
caladd wants to merge 1 commit into
developfrom 
feature/ansible-stacki_host-module
Conversation
@caladd
@caladdcaladd
commented
Oct 21, 2020•

edited

Loading

Copy link


Copy Markdown

Contributor
An Ansible module for adding, editing, and removing Stacki hosts.
The module takes these parameters:
`name` - The name of the host to manage
`appliance` - The appliance used for the host
`box` - The box used for the host
`comment` - Freeform text to attach to the host
`environment` - Environment to assign the host
`groups` - List of groups to add or remove the host from. Each item has parameters:
`name` - The name of the group
`state` - If present, then a host will be added to this group.If absent, then the host will be removed from this group.
`installaction` - The install boot action for the host
`interfaces` - List of network interfaces for the host. Each item has parameters:
`channel` - Channel for this interface
`default` - Is the interface is the default for the hosts
`interface` - Device for this interface
`ip` - IP address for this interface
`name` - Logical name for this interface
`network` - Network attached to this interface
`mac` - Hardware MAC address for this interface
`module` - Device module for this interface
`options` - Module options for this interface
`vlan` - The VLAN ID for this interface
`state` - If present, then an interface will be added to the host, if needed, and options updates. If absent, then the interface will be removed from the host. If update_mac, then the interface device is used to update the mac. If update_interface, then the mac is used to update the interface device. Note: The interface device and mac are both used to match for updating an existing interface.
`osaction` - The os boot action for the host
`rack` - By convention, the number of the rack where the host is located
`rank` - By convention, the position of the host in the rack
`state` - If present, then a host will be added (if needed) and options are set to match. If absent, then the host will be removed.

Example playbook:
---
- hosts: localhost
tasks:
- name: Add a host
stacki_host:
name: test-backend
appliance: backend
box: default
comment: "test host"
groups:
- name: test
installaction: console
interfaces:
- default: true
interface: eth0
ip: "10.10.10.10"
mac: "00:11:22:33:44:55"
rack: "10"
rank: "4"
register: result
- name: Add host output
debug:
var: result
- name: Modify a host
stacki_host:
name: test-backend
groups:
- name: test
state: absent
installaction: default
interfaces:
- interface: eth0
state: absent
- interface: eth1
ip: "10.10.2.1"
mac: "11:22:33:44:55:66"
rack: "0"
rank: "0"
register: result
- name: Modify host output
debug:
var: result
- name: Remove a host
stacki_host:
name: test-backend
state: absent
register: result
- name: Remove host output
debug:
var: result

Output of the debug commands, showing the structure of the data returned:
TASK [Add host output] **************************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Modify host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Remove host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}

@caladd
FEATURE: Ansible module to manage Stacki hosts
2ff277a
An Ansible module for adding, editing, and removing Stacki hosts.
The module takes these parameters:
`name` - The name of the host to manage
`appliance` - The appliance used for the host
`box` - The box used for the host
`comment` - Freeform text to attach to the host
`environment` - Environment to assign the host
`groups` - List of groups to add or remove the host from. Each item has parameters:
`name` - The name of the group
`state` - If present, then a host will be added to this group.If absent, then the host will be removed from this group.
`installaction` - The install boot action for the host
`interfaces` - List of network interfaces for the host. Each item has parameters:
`channel` - Channel for this interface
`default` - Is the interface is the default for the hosts
`interface` - Device for this interface
`ip` - IP address for this interface
`name` - Logical name for this interface
`network` - Network attached to this interface
`mac` - Hardware MAC address for this interface
`module` - Device module for this interface
`options` - Module options for this interface
`vlan` - The VLAN ID for this interface
`state` - If present, then an interface will be added to the host, if needed, and options updates. If absent, then the interface will be removed from the host. If update_mac, then the interface device is used to update the mac. If update_interface, then the mac is used to update the interface device. Note: The interface device and mac are both used to match for updating an existing interface.
`osaction` - The os boot action for the host
`rack` - By convention, the number of the rack where the host is located
`rank` - By convention, the position of the host in the rack
`state` - If present, then a host will be added (if needed) and options are set to match. If absent, then the host will be removed.
Example playbook:
```
---
- hosts: localhost
tasks:
- name: Add a host
stacki_host:
name: test-backend
appliance: backend
box: default
comment: "test host"
groups:
- name: test
installaction: console
interfaces:
- default: true
interface: eth0
ip: "10.10.10.10"
mac: "00:11:22:33:44:55"
rack: "10"
rank: "4"
register: result
- name: Add host output
debug:
var: result
- name: Modify a host
stacki_host:
name: test-backend
groups:
- name: test
state: absent
installaction: default
interfaces:
- interface: eth0
state: absent
- interface: eth1
ip: "10.10.2.1"
mac: "11:22:33:44:55:66"
rack: "0"
rank: "0"
register: result
- name: Modify host output
debug:
var: result
- name: Remove a host
stacki_host:
name: test-backend
state: absent
register: result
- name: Remove host output
debug:
var: result
```
Output of the debug commands, showing the structure of the data returned:
```
TASK [Add host output] **************************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Modify host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Remove host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
```
langkurt
langkurt
reviewed
Oct 21, 2020
View reviewed changes
Comment threadcommon/src/stack/ansible/plugins/modules/stacki_host.py
 if field in ("installaction", "osaction"):
 run_stack_command(f"set.host.bootaction", [
 module.params["name"],
 f"type={field[:-6]}",
@langkurtlangkurtOct 21, 2020

Copy link


Copy Markdown

Contributor
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

clever
cjy008
cjy008
reviewed
Oct 22, 2020
View reviewed changes
Comment threadtest-framework/test-suites/integration/files/ansible/add_host.yaml
@@ -0,0 +1,19 @@
---
- hosts: localhost
 tasks:
@cjy008cjy008Oct 22, 2020

Copy link


Copy Markdown

Contributor
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Is this missing the state param? Or am I just tripping?
@caladdcaladdOct 22, 2020

Copy link


Copy Markdown

ContributorAuthor
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

state defaults to present, which is the standard behavior for Ansible modules.
Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers

@bsandersbsandersAwaiting requested review from bsanders
@megkidomegkidoAwaiting requested review from megkido

3 more reviewers

@cjy008cjy008cjy008 approved these changes
@langkurtlangkurtlangkurt approved these changes
@bgreenbbgreenbbgreenb approved these changes
Reviewers whose approvals may not affect merge requirements

Assignees


No one assigned


Labels


None yet


Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

4 participants

@caladd@cjy008@langkurt@bgreenb

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Remove or un-stick sticky/fixed headers that block content\n(function() {\n function unstick() {\n document.querySelectorAll('header, nav, [role=\"banner\"], .header, .navbar, .sticky, .fixed-top, [style*=\"position: fixed\"], [style*=\"position:sticky\"]').forEach(function(el) {\n if (el.style.position === 'fixed' || el.style.position === 'sticky' || \n getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {\n el.style.position = 'static';\n el.style.top = 'auto';\n el.style.zIndex = 'auto';\n }\n });\n }\n \n unstick();\n \n var observer = new MutationObserver(unstick);\n observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });\n})();", "Kill Sticky Headers");
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
FEATURE: Ansible module to manage Stacki hosts - #846
Open
caladd wants to merge 1 commit into
developfrom 
feature/ansible-stacki_host-module
Open
FEATURE: Ansible module to manage Stacki hosts#846
caladd wants to merge 1 commit into
developfrom 
feature/ansible-stacki_host-module
Conversation
@caladd
@caladdcaladd
commented
Oct 21, 2020•

edited

Loading

Copy link


Copy Markdown

Contributor
An Ansible module for adding, editing, and removing Stacki hosts.
The module takes these parameters:
`name` - The name of the host to manage
`appliance` - The appliance used for the host
`box` - The box used for the host
`comment` - Freeform text to attach to the host
`environment` - Environment to assign the host
`groups` - List of groups to add or remove the host from. Each item has parameters:
`name` - The name of the group
`state` - If present, then a host will be added to this group.If absent, then the host will be removed from this group.
`installaction` - The install boot action for the host
`interfaces` - List of network interfaces for the host. Each item has parameters:
`channel` - Channel for this interface
`default` - Is the interface is the default for the hosts
`interface` - Device for this interface
`ip` - IP address for this interface
`name` - Logical name for this interface
`network` - Network attached to this interface
`mac` - Hardware MAC address for this interface
`module` - Device module for this interface
`options` - Module options for this interface
`vlan` - The VLAN ID for this interface
`state` - If present, then an interface will be added to the host, if needed, and options updates. If absent, then the interface will be removed from the host. If update_mac, then the interface device is used to update the mac. If update_interface, then the mac is used to update the interface device. Note: The interface device and mac are both used to match for updating an existing interface.
`osaction` - The os boot action for the host
`rack` - By convention, the number of the rack where the host is located
`rank` - By convention, the position of the host in the rack
`state` - If present, then a host will be added (if needed) and options are set to match. If absent, then the host will be removed.

Example playbook:
---
- hosts: localhost
tasks:
- name: Add a host
stacki_host:
name: test-backend
appliance: backend
box: default
comment: "test host"
groups:
- name: test
installaction: console
interfaces:
- default: true
interface: eth0
ip: "10.10.10.10"
mac: "00:11:22:33:44:55"
rack: "10"
rank: "4"
register: result
- name: Add host output
debug:
var: result
- name: Modify a host
stacki_host:
name: test-backend
groups:
- name: test
state: absent
installaction: default
interfaces:
- interface: eth0
state: absent
- interface: eth1
ip: "10.10.2.1"
mac: "11:22:33:44:55:66"
rack: "0"
rank: "0"
register: result
- name: Modify host output
debug:
var: result
- name: Remove a host
stacki_host:
name: test-backend
state: absent
register: result
- name: Remove host output
debug:
var: result

Output of the debug commands, showing the structure of the data returned:
TASK [Add host output] **************************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Modify host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Remove host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}

@caladd
FEATURE: Ansible module to manage Stacki hosts
2ff277a
An Ansible module for adding, editing, and removing Stacki hosts.
The module takes these parameters:
`name` - The name of the host to manage
`appliance` - The appliance used for the host
`box` - The box used for the host
`comment` - Freeform text to attach to the host
`environment` - Environment to assign the host
`groups` - List of groups to add or remove the host from. Each item has parameters:
`name` - The name of the group
`state` - If present, then a host will be added to this group.If absent, then the host will be removed from this group.
`installaction` - The install boot action for the host
`interfaces` - List of network interfaces for the host. Each item has parameters:
`channel` - Channel for this interface
`default` - Is the interface is the default for the hosts
`interface` - Device for this interface
`ip` - IP address for this interface
`name` - Logical name for this interface
`network` - Network attached to this interface
`mac` - Hardware MAC address for this interface
`module` - Device module for this interface
`options` - Module options for this interface
`vlan` - The VLAN ID for this interface
`state` - If present, then an interface will be added to the host, if needed, and options updates. If absent, then the interface will be removed from the host. If update_mac, then the interface device is used to update the mac. If update_interface, then the mac is used to update the interface device. Note: The interface device and mac are both used to match for updating an existing interface.
`osaction` - The os boot action for the host
`rack` - By convention, the number of the rack where the host is located
`rank` - By convention, the position of the host in the rack
`state` - If present, then a host will be added (if needed) and options are set to match. If absent, then the host will be removed.
Example playbook:
```
---
- hosts: localhost
tasks:
- name: Add a host
stacki_host:
name: test-backend
appliance: backend
box: default
comment: "test host"
groups:
- name: test
installaction: console
interfaces:
- default: true
interface: eth0
ip: "10.10.10.10"
mac: "00:11:22:33:44:55"
rack: "10"
rank: "4"
register: result
- name: Add host output
debug:
var: result
- name: Modify a host
stacki_host:
name: test-backend
groups:
- name: test
state: absent
installaction: default
interfaces:
- interface: eth0
state: absent
- interface: eth1
ip: "10.10.2.1"
mac: "11:22:33:44:55:66"
rack: "0"
rank: "0"
register: result
- name: Modify host output
debug:
var: result
- name: Remove a host
stacki_host:
name: test-backend
state: absent
register: result
- name: Remove host output
debug:
var: result
```
Output of the debug commands, showing the structure of the data returned:
```
TASK [Add host output] **************************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Modify host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Remove host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
```
langkurt
langkurt
reviewed
Oct 21, 2020
View reviewed changes
Comment threadcommon/src/stack/ansible/plugins/modules/stacki_host.py
 if field in ("installaction", "osaction"):
 run_stack_command(f"set.host.bootaction", [
 module.params["name"],
 f"type={field[:-6]}",
@langkurtlangkurtOct 21, 2020

Copy link


Copy Markdown

Contributor
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

clever
cjy008
cjy008
reviewed
Oct 22, 2020
View reviewed changes
Comment threadtest-framework/test-suites/integration/files/ansible/add_host.yaml
@@ -0,0 +1,19 @@
---
- hosts: localhost
 tasks:
@cjy008cjy008Oct 22, 2020

Copy link


Copy Markdown

Contributor
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Is this missing the state param? Or am I just tripping?
@caladdcaladdOct 22, 2020

Copy link


Copy Markdown

ContributorAuthor
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

state defaults to present, which is the standard behavior for Ansible modules.
Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers

@bsandersbsandersAwaiting requested review from bsanders
@megkidomegkidoAwaiting requested review from megkido

3 more reviewers

@cjy008cjy008cjy008 approved these changes
@langkurtlangkurtlangkurt approved these changes
@bgreenbbgreenbbgreenb approved these changes
Reviewers whose approvals may not affect merge requirements

Assignees


No one assigned


Labels


None yet


Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

4 participants

@caladd@cjy008@langkurt@bgreenb

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Universal Dark Mode - works on any site\n(function() {\n var enabled = true;\n \n function applyDarkMode() {\n if (!enabled) return;\n \n // Create style element if it doesn't exist\n var style = document.getElementById('universal-dark-mode-style');\n if (!style) {\n style = document.createElement('style');\n style.id = 'universal-dark-mode-style';\n document.head.appendChild(style);\n }\n \n // Dark mode CSS - inverts colors but preserves images/video\n style.textContent = '\n /* Invert everything except media */\n html {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #1a1a2e !important;\n }\n \n /* Restore images, videos, iframes, canvas */\n img, video, iframe, canvas, svg, picture, [style*=\"background-image\"] {\n filter: invert(1) hue-rotate(180deg) !important;\n }\n \n /* Preserve specific elements that should not be inverted */\n .no-dark-mode, .no-dark-mode *,\n [data-theme=\"light\"], [data-theme=\"light\"],\n .ace_editor, .ace_editor *,\n .CodeMirror, .CodeMirror *,\n .monaco-editor, .monaco-editor *,\n .markdown-body pre, .markdown-body pre *,\n .highlight, .highlight *,\n pre code, pre code * {\n filter: none !important;\n }\n \n /* Fix common UI elements */\n .modal, .popup, .dropdown-menu, .tooltip, .popover {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #2d2d44 !important;\n border-color: #444 !important;\n }\n \n /* Scrollbars */\n ::-webkit-scrollbar { background: #1a1a2e !important; }\n ::-webkit-scrollbar-thumb { background: #444 !important; }\n ::-webkit-scrollbar-thumb:hover { background: #555 !important; }\n \n /* Selection */\n ::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ';\n }\n \n function removeDarkMode() {\n var style = document.getElementById('universal-dark-mode-style');\n if (style) style.remove();\n }\n \n // Toggle with Alt+Shift+D\n document.addEventListener('keydown', function(e) {\n if (e.altKey && e.shiftKey && e.key === 'D') {\n e.preventDefault();\n enabled = !enabled;\n if (enabled) {\n applyDarkMode();\n console.log('[Universal Dark Mode] Enabled');\n } else {\n removeDarkMode();\n console.log('[Universal Dark Mode] Disabled');\n }\n }\n });\n \n // Apply on load\n applyDarkMode();\n \n // Re-apply on dynamic content\n var observer = new MutationObserver(function(mutations) {\n if (enabled && !document.getElementById('universal-dark-mode-style')) {\n applyDarkMode();\n }\n });\n observer.observe(document.head, { childList: true });\n \n console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');\n})();", "Universal Dark Mode");
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content
FEATURE: Ansible module to manage Stacki hosts - #846
Open
caladd wants to merge 1 commit into
developfrom 
feature/ansible-stacki_host-module
Open
FEATURE: Ansible module to manage Stacki hosts#846
caladd wants to merge 1 commit into
developfrom 
feature/ansible-stacki_host-module
Conversation
@caladd
@caladdcaladd
commented
Oct 21, 2020•

edited

Loading

Copy link


Copy Markdown

Contributor
An Ansible module for adding, editing, and removing Stacki hosts.
The module takes these parameters:
`name` - The name of the host to manage
`appliance` - The appliance used for the host
`box` - The box used for the host
`comment` - Freeform text to attach to the host
`environment` - Environment to assign the host
`groups` - List of groups to add or remove the host from. Each item has parameters:
`name` - The name of the group
`state` - If present, then a host will be added to this group.If absent, then the host will be removed from this group.
`installaction` - The install boot action for the host
`interfaces` - List of network interfaces for the host. Each item has parameters:
`channel` - Channel for this interface
`default` - Is the interface is the default for the hosts
`interface` - Device for this interface
`ip` - IP address for this interface
`name` - Logical name for this interface
`network` - Network attached to this interface
`mac` - Hardware MAC address for this interface
`module` - Device module for this interface
`options` - Module options for this interface
`vlan` - The VLAN ID for this interface
`state` - If present, then an interface will be added to the host, if needed, and options updates. If absent, then the interface will be removed from the host. If update_mac, then the interface device is used to update the mac. If update_interface, then the mac is used to update the interface device. Note: The interface device and mac are both used to match for updating an existing interface.
`osaction` - The os boot action for the host
`rack` - By convention, the number of the rack where the host is located
`rank` - By convention, the position of the host in the rack
`state` - If present, then a host will be added (if needed) and options are set to match. If absent, then the host will be removed.

Example playbook:
---
- hosts: localhost
tasks:
- name: Add a host
stacki_host:
name: test-backend
appliance: backend
box: default
comment: "test host"
groups:
- name: test
installaction: console
interfaces:
- default: true
interface: eth0
ip: "10.10.10.10"
mac: "00:11:22:33:44:55"
rack: "10"
rank: "4"
register: result
- name: Add host output
debug:
var: result
- name: Modify a host
stacki_host:
name: test-backend
groups:
- name: test
state: absent
installaction: default
interfaces:
- interface: eth0
state: absent
- interface: eth1
ip: "10.10.2.1"
mac: "11:22:33:44:55:66"
rack: "0"
rank: "0"
register: result
- name: Modify host output
debug:
var: result
- name: Remove a host
stacki_host:
name: test-backend
state: absent
register: result
- name: Remove host output
debug:
var: result

Output of the debug commands, showing the structure of the data returned:
TASK [Add host output] **************************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Modify host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Remove host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}

@caladd
FEATURE: Ansible module to manage Stacki hosts
2ff277a
An Ansible module for adding, editing, and removing Stacki hosts.
The module takes these parameters:
`name` - The name of the host to manage
`appliance` - The appliance used for the host
`box` - The box used for the host
`comment` - Freeform text to attach to the host
`environment` - Environment to assign the host
`groups` - List of groups to add or remove the host from. Each item has parameters:
`name` - The name of the group
`state` - If present, then a host will be added to this group.If absent, then the host will be removed from this group.
`installaction` - The install boot action for the host
`interfaces` - List of network interfaces for the host. Each item has parameters:
`channel` - Channel for this interface
`default` - Is the interface is the default for the hosts
`interface` - Device for this interface
`ip` - IP address for this interface
`name` - Logical name for this interface
`network` - Network attached to this interface
`mac` - Hardware MAC address for this interface
`module` - Device module for this interface
`options` - Module options for this interface
`vlan` - The VLAN ID for this interface
`state` - If present, then an interface will be added to the host, if needed, and options updates. If absent, then the interface will be removed from the host. If update_mac, then the interface device is used to update the mac. If update_interface, then the mac is used to update the interface device. Note: The interface device and mac are both used to match for updating an existing interface.
`osaction` - The os boot action for the host
`rack` - By convention, the number of the rack where the host is located
`rank` - By convention, the position of the host in the rack
`state` - If present, then a host will be added (if needed) and options are set to match. If absent, then the host will be removed.
Example playbook:
```
---
- hosts: localhost
tasks:
- name: Add a host
stacki_host:
name: test-backend
appliance: backend
box: default
comment: "test host"
groups:
- name: test
installaction: console
interfaces:
- default: true
interface: eth0
ip: "10.10.10.10"
mac: "00:11:22:33:44:55"
rack: "10"
rank: "4"
register: result
- name: Add host output
debug:
var: result
- name: Modify a host
stacki_host:
name: test-backend
groups:
- name: test
state: absent
installaction: default
interfaces:
- interface: eth0
state: absent
- interface: eth1
ip: "10.10.2.1"
mac: "11:22:33:44:55:66"
rack: "0"
rank: "0"
register: result
- name: Modify host output
debug:
var: result
- name: Remove a host
stacki_host:
name: test-backend
state: absent
register: result
- name: Remove host output
debug:
var: result
```
Output of the debug commands, showing the structure of the data returned:
```
TASK [Add host output] **************************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Modify host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
TASK [Remove host output] ***********************************************************************
ok: [localhost] => {
"result": {
"changed": true,
"failed": false
}
}
```
langkurt
langkurt
reviewed
Oct 21, 2020
View reviewed changes
Comment threadcommon/src/stack/ansible/plugins/modules/stacki_host.py
 if field in ("installaction", "osaction"):
 run_stack_command(f"set.host.bootaction", [
 module.params["name"],
 f"type={field[:-6]}",
@langkurtlangkurtOct 21, 2020

Copy link


Copy Markdown

Contributor
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

clever
cjy008
cjy008
reviewed
Oct 22, 2020
View reviewed changes
Comment threadtest-framework/test-suites/integration/files/ansible/add_host.yaml
@@ -0,0 +1,19 @@
---
- hosts: localhost
 tasks:
@cjy008cjy008Oct 22, 2020

Copy link


Copy Markdown

Contributor
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Is this missing the state param? Or am I just tripping?
@caladdcaladdOct 22, 2020

Copy link


Copy Markdown

ContributorAuthor
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

state defaults to present, which is the standard behavior for Ansible modules.
Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers

@bsandersbsandersAwaiting requested review from bsanders
@megkidomegkidoAwaiting requested review from megkido

3 more reviewers

@cjy008cjy008cjy008 approved these changes
@langkurtlangkurtlangkurt approved these changes
@bgreenbbgreenbbgreenb approved these changes
Reviewers whose approvals may not affect merge requirements

Assignees


No one assigned


Labels


None yet


Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

4 participants

@caladd@cjy008@langkurt@bgreenb