Steam Deck

[DylanTackoor]

Input device?

Steam Deck

Input device ID?

evdev/0/Valve Software Steam Deck Controller

Operating System?

SteamOS 3

What is the key assignment.

GCpadNew.ini as configured by EmuDeck

[GCPad1]
Device = evdev/0/Microsoft X-Box 360 pad 0
Buttons/A = SOUTH
Buttons/B = EAST
Buttons/X = NORTH
Buttons/Y = WEST
Buttons/Z = TR
Buttons/Start = START
Main Stick/Up = `Axis 1-`
Main Stick/Down = `Axis 1+`
Main Stick/Left = `Axis 0-`
Main Stick/Right = `Axis 0+`
Main Stick/Modifier = `Shift`
Main Stick/Modifier/Range = 50.000000000000000
Main Stick/Calibration = 100.00 101.96 105.46 110.28 110.96 106.32 102.08 101.92 100.00 101.96 106.04 112.82 112.69 106.81 101.42 100.21 100.00 101.96 107.34 112.09 115.31 115.88 108.24 101.96 99.54 99.80 104.07 106.47 107.28 110.92 105.35 101.96
C-Stick/Up = `Axis 4-`
C-Stick/Down = `Axis 4+`
C-Stick/Left = `Axis 3-`
C-Stick/Right = `Axis 3+`
C-Stick/Modifier = `Ctrl`
C-Stick/Modifier/Range = 50.000000000000000
C-Stick/Calibration = 100.00 101.96 108.24 112.25 112.76 111.88 108.24 101.96 100.00 98.55 97.64 100.59 107.99 110.64 108.24 101.96 100.00 101.96 106.57 115.58 118.40 116.73 108.24 101.96 100.00 101.96 105.64 105.39 107.99 111.37 107.46 101.96
Triggers/L = `Full Axis 2+`
Triggers/R = `Full Axis 5+`
D-Pad/Up = `Axis 7-`
D-Pad/Down = `Axis 7+`
D-Pad/Left = `Axis 6-`
D-Pad/Right = `Axis 6+`
Triggers/L-Analog = `Full Axis 2+`
Triggers/R-Analog = `Full Axis 5+`
Rumble/Motor = Strong

[DylanTackoor]

hah just realized the key assignment is invalid as it's not for the evdev/0/Valve Software Steam Deck Controller 🤦 I'll try getting a proper config for it

[DylanTackoor]

I could only get the evdev/0/Microsoft X-Box 360 pad 0 to work ☹️

[Venomalia]

I can't do much with config files, so how should I know what the e.g. R3 or select button is?
I need them in a format key id = key description.
please use the linked templates https://github.com/Venomalia/UniversalDynamicInput/wiki/Device-Templates#evdev,

[Venomalia]

By the way, are you using EmuDeck?
Mine that there not used the official Dolphin version, which may cause problems.

[DylanTackoor]

@Venomalia yeah I'm using the Dolphin flatpak that EmuDeck installs. I'll try compiling it later to see if that will get the evdev/0/Valve Software Steam Deck Controller to respond in Dolphin 🤷

[Venomalia]

i have added evdev/0/Microsoft X-Box 360 pad 0
https://github.com/Venomalia/UniversalDynamicInput/archive/refs/heads/main.zip

[RazorDarkAMG]

What version is it ? Thank's !

[megasart]

When I load this into prime trilogy the textures load upside down