Home

Jump to bottomEditNew page
Bud edited this page Dec 19, 2024 · 2 revisions

Virtual Display Driver


Overview

The Virtual Display Driver is a driver solution that enables the creation of virtual monitors on Windows 10 and 11 systems. These virtual monitors function just like physical displays, allowing users to extend their desktop environment, enhance remote work setups, support VR applications, and improve streaming and recording workflows.

This driver allows for the addition of high-resolution virtual displays, supporting resolutions from 640x480 up to 7680x4320 (8K), and a wide range of refresh rates, including 60Hz, 75Hz, 90Hz, 120Hz, 144Hz, 165Hz, and floating point ones like 59.99Hz.

Please note, some features are only available on later versions of Windows 11!

Features


  • Virtual Monitors: Add virtual monitors with resolutions from 640x480 to 7680x4320 (8K).
  • High Refresh Rates: Supports refresh rates including 60Hz, 75Hz, 90Hz, 120Hz, 144Hz, 165Hz, 240Hz, 480Hz, and 500Hz.
  • Compatibility: Works with VR, OBS, Sunshine, and other desktop sharing software.
  • Flexibility: Allows you to adjust resolutions and refresh rates beyond the capabilities of physical displays and configure it more than a lot of other virtual display drivers.

Usage


A virtual display driver simulates additional monitors in the system, enabling users to stream desktops to VR environments like Oculus or Sunshine. It creates virtual screens that can be managed and toggled on/off, allowing for multi-monitor setups without physical hardware. This driver is essential for VR desktop streaming, offering flexibility to display content inside a VR headset in steam theatre mode, enhancing remote desktop experiences, and enabling developers to test applications across multiple virtual screens. By adjusting display settings or enabling virtual monitors, users can optimize their VR and multitasking setups for various tasks.


Comparison with Other IDDs


The table below shows a comparison with other popular virtual display projects:

ProjectIddcx VersionSignedSDRHDRH-CursorTweakableARM64 SupportCustom EDIDFloating Point Refresh Rates
Virtual Display Driver1.10 (latest)✅✅ (8/10bit)✅ (8/10/12bit)✅✅✅✅✅
usbmmidd_v2-✅✅ (8bit)------
virtual-display-rs1.5-✅ (8bit)-#81✅---
parsec-vdd1.5✅✅ (8bit)-✅🆗---
IddSampleDriver1.2-✅ (8bit)------
RustDeskIddDriver1.2-✅ (8bit)------

Sponsors


Free code signing on Windows provided by SignPath.io, certificate by SignPath Foundation

Developers


The Virtual Display Driver project is maintained by a dedicated team of developers:

  • MikeTheTech: The project creator and overseer of the project "and great boss" (quote by Bud)
  • Bud: The core developer who handles most of the coding and implementation work of new features and optimizations.
  • Jocke: Focuses on writing PowerShell scripts and contributing to user support whilst also being the idea man.

Helping out!


We welcome contributions from the community! If you have any suggestions or improvements, please feel free to open an issue. Or if you'd like to donate to support our work, that would be greatly appreciated.


Star History Chart


License


This project is licensed under the MIT License. See the LICENSE file for more details.


Add a custom footer
Add a custom sidebar

Clone this wiki locally

, 'i'); if (__m === '*' || __re.test(location.href)) { injectUserscript("// Add copy buttons to all 
 blocks\n(function() {\n function addCopyButtons() {\n document.querySelectorAll('pre code').forEach(function(codeBlock) {\n if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;\n codeBlock.parentElement.setAttribute('data-copy-added', 'true');\n \n var btn = document.createElement('button');\n btn.textContent = 'Copy';\n btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';\n btn.onmouseover = function() { this.style.opacity = '1'; };\n btn.onmouseout = function() { this.style.opacity = '0.7'; };\n btn.onclick = function() {\n navigator.clipboard.writeText(codeBlock.textContent).then(function() {\n btn.textContent = 'Copied!';\n setTimeout(function() { btn.textContent = 'Copy'; }, 1500);\n });\n };\n codeBlock.parentElement.style.position = 'relative';\n codeBlock.parentElement.appendChild(btn);\n });\n }\n \n addCopyButtons();\n \n // Re-run on dynamic content\n var observer = new MutationObserver(addCopyButtons);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Add Copy Buttons to Code Blocks");
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content
Home
Jump to bottomEditNew page

Bud edited this page Dec 19, 2024
·
2 revisions
Virtual Display Driver

Overview
The Virtual Display Driver is a driver solution that enables the creation of virtual monitors on Windows 10 and 11 systems. These virtual monitors function just like physical displays, allowing users to extend their desktop environment, enhance remote work setups, support VR applications, and improve streaming and recording workflows.
This driver allows for the addition of high-resolution virtual displays, supporting resolutions from 640x480 up to 7680x4320 (8K), and a wide range of refresh rates, including 60Hz, 75Hz, 90Hz, 120Hz, 144Hz, 165Hz, and floating point ones like 59.99Hz.


Please note, some features are only available on later versions of Windows 11!

Features

  • Virtual Monitors: Add virtual monitors with resolutions from 640x480 to 7680x4320 (8K).
  • High Refresh Rates: Supports refresh rates including 60Hz, 75Hz, 90Hz, 120Hz, 144Hz, 165Hz, 240Hz, 480Hz, and 500Hz.
  • Compatibility: Works with VR, OBS, Sunshine, and other desktop sharing software.
  • Flexibility: Allows you to adjust resolutions and refresh rates beyond the capabilities of physical displays and configure it more than a lot of other virtual display drivers.

Usage

A virtual display driver simulates additional monitors in the system, enabling users to stream desktops to VR environments like Oculus or Sunshine. It creates virtual screens that can be managed and toggled on/off, allowing for multi-monitor setups without physical hardware. This driver is essential for VR desktop streaming, offering flexibility to display content inside a VR headset in steam theatre mode, enhancing remote desktop experiences, and enabling developers to test applications across multiple virtual screens. By adjusting display settings or enabling virtual monitors, users can optimize their VR and multitasking setups for various tasks.

Comparison with Other IDDs

The table below shows a comparison with other popular virtual display projects:
ProjectIddcx VersionSignedSDRHDRH-CursorTweakableARM64 SupportCustom EDIDFloating Point Refresh Rates
Virtual Display Driver1.10 (latest)✅✅ (8/10bit)✅ (8/10/12bit)✅✅✅✅✅
usbmmidd_v2-✅✅ (8bit)------
virtual-display-rs1.5-✅ (8bit)-#81✅---
parsec-vdd1.5✅✅ (8bit)-✅🆗---
IddSampleDriver1.2-✅ (8bit)------
RustDeskIddDriver1.2-✅ (8bit)------

Sponsors

Free code signing on Windows provided by SignPath.io, certificate by SignPath Foundation

Developers

The Virtual Display Driver project is maintained by a dedicated team of developers:
  • MikeTheTech: The project creator and overseer of the project "and great boss" (quote by Bud)
  • Bud: The core developer who handles most of the coding and implementation work of new features and optimizations.
  • Jocke: Focuses on writing PowerShell scripts and contributing to user support whilst also being the idea man.

Helping out!

We welcome contributions from the community! If you have any suggestions or improvements, please feel free to open an issue. Or if you'd like to donate to support our work, that would be greatly appreciated.

Star History Chart

License

This project is licensed under the MIT License. See the LICENSE file for more details.

 Add a custom footer

 Add a custom sidebar

Clone this wiki locally

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Force GitHub README to respect dark mode\n(function() {\n var style = document.createElement('style');\n style.textContent = '\n .markdown-body {\n color-scheme: dark light;\n }\n .markdown-body pre { background: #161b22 !important; }\n .markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }\n .markdown-body table th, .markdown-body table td { border-color: #30363d !important; }\n .markdown-body img { background: #0d1117; }\n .markdown-body blockquote { border-left-color: #8b949e; }\n .markdown-body hr { border-color: #30363d; }\n ';\n document.head.appendChild(style);\n})();", "GitHub Dark Mode README Fix");
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
Home
Jump to bottomEditNew page

Bud edited this page Dec 19, 2024
·
2 revisions
Virtual Display Driver

Overview
The Virtual Display Driver is a driver solution that enables the creation of virtual monitors on Windows 10 and 11 systems. These virtual monitors function just like physical displays, allowing users to extend their desktop environment, enhance remote work setups, support VR applications, and improve streaming and recording workflows.
This driver allows for the addition of high-resolution virtual displays, supporting resolutions from 640x480 up to 7680x4320 (8K), and a wide range of refresh rates, including 60Hz, 75Hz, 90Hz, 120Hz, 144Hz, 165Hz, and floating point ones like 59.99Hz.


Please note, some features are only available on later versions of Windows 11!

Features

  • Virtual Monitors: Add virtual monitors with resolutions from 640x480 to 7680x4320 (8K).
  • High Refresh Rates: Supports refresh rates including 60Hz, 75Hz, 90Hz, 120Hz, 144Hz, 165Hz, 240Hz, 480Hz, and 500Hz.
  • Compatibility: Works with VR, OBS, Sunshine, and other desktop sharing software.
  • Flexibility: Allows you to adjust resolutions and refresh rates beyond the capabilities of physical displays and configure it more than a lot of other virtual display drivers.

Usage

A virtual display driver simulates additional monitors in the system, enabling users to stream desktops to VR environments like Oculus or Sunshine. It creates virtual screens that can be managed and toggled on/off, allowing for multi-monitor setups without physical hardware. This driver is essential for VR desktop streaming, offering flexibility to display content inside a VR headset in steam theatre mode, enhancing remote desktop experiences, and enabling developers to test applications across multiple virtual screens. By adjusting display settings or enabling virtual monitors, users can optimize their VR and multitasking setups for various tasks.

Comparison with Other IDDs

The table below shows a comparison with other popular virtual display projects:
ProjectIddcx VersionSignedSDRHDRH-CursorTweakableARM64 SupportCustom EDIDFloating Point Refresh Rates
Virtual Display Driver1.10 (latest)✅✅ (8/10bit)✅ (8/10/12bit)✅✅✅✅✅
usbmmidd_v2-✅✅ (8bit)------
virtual-display-rs1.5-✅ (8bit)-#81✅---
parsec-vdd1.5✅✅ (8bit)-✅🆗---
IddSampleDriver1.2-✅ (8bit)------
RustDeskIddDriver1.2-✅ (8bit)------

Sponsors

Free code signing on Windows provided by SignPath.io, certificate by SignPath Foundation

Developers

The Virtual Display Driver project is maintained by a dedicated team of developers:
  • MikeTheTech: The project creator and overseer of the project "and great boss" (quote by Bud)
  • Bud: The core developer who handles most of the coding and implementation work of new features and optimizations.
  • Jocke: Focuses on writing PowerShell scripts and contributing to user support whilst also being the idea man.

Helping out!

We welcome contributions from the community! If you have any suggestions or improvements, please feel free to open an issue. Or if you'd like to donate to support our work, that would be greatly appreciated.

Star History Chart

License

This project is licensed under the MIT License. See the LICENSE file for more details.

 Add a custom footer

 Add a custom sidebar

Clone this wiki locally

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Highlight search terms from Google/DuckDuckGo/Bing referrer\n(function() {\n var ref = document.referrer;\n var terms = [];\n \n if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {\n var url = new URL(ref);\n var q = url.searchParams.get('q') || url.searchParams.get('p');\n if (q) {\n terms = q.split(/\\s+/).filter(function(t) { return t.length > 2; });\n }\n }\n \n if (terms.length === 0) return;\n \n var style = document.createElement('style');\n style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';\n document.head.appendChild(style);\n \n function highlight(node) {\n if (node.nodeType === 3) { // text node\n var text = node.textContent;\n var found = false;\n terms.forEach(function(term) {\n var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\\]\\\\]/g, '\\\\') + ')', 'gi');\n if (regex.test(text)) {\n found = true;\n var frag = document.createDocumentFragment();\n var parts = text.split(regex);\n parts.forEach(function(part, i) {\n if (i % 2 === 0) {\n frag.appendChild(document.createTextNode(part));\n } else {\n var span = document.createElement('span');\n span.className = 'userscript-highlight';\n span.textContent = part;\n frag.appendChild(span);\n }\n });\n node.parentNode.replaceChild(frag, node);\n }\n });\n } else if (node.nodeType === 1 && node.childNodes) { // element\n var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];\n if (!skipTags.includes(node.tagName)) {\n Array.from(node.childNodes).forEach(highlight);\n }\n }\n }\n \n highlight(document.body);\n \n // Re-highlight on dynamic content\n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1 || node.nodeType === 3) highlight(node);\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Highlight Search Terms");
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
Home
Jump to bottomEditNew page

Bud edited this page Dec 19, 2024
·
2 revisions
Virtual Display Driver

Overview
The Virtual Display Driver is a driver solution that enables the creation of virtual monitors on Windows 10 and 11 systems. These virtual monitors function just like physical displays, allowing users to extend their desktop environment, enhance remote work setups, support VR applications, and improve streaming and recording workflows.
This driver allows for the addition of high-resolution virtual displays, supporting resolutions from 640x480 up to 7680x4320 (8K), and a wide range of refresh rates, including 60Hz, 75Hz, 90Hz, 120Hz, 144Hz, 165Hz, and floating point ones like 59.99Hz.


Please note, some features are only available on later versions of Windows 11!

Features

  • Virtual Monitors: Add virtual monitors with resolutions from 640x480 to 7680x4320 (8K).
  • High Refresh Rates: Supports refresh rates including 60Hz, 75Hz, 90Hz, 120Hz, 144Hz, 165Hz, 240Hz, 480Hz, and 500Hz.
  • Compatibility: Works with VR, OBS, Sunshine, and other desktop sharing software.
  • Flexibility: Allows you to adjust resolutions and refresh rates beyond the capabilities of physical displays and configure it more than a lot of other virtual display drivers.

Usage

A virtual display driver simulates additional monitors in the system, enabling users to stream desktops to VR environments like Oculus or Sunshine. It creates virtual screens that can be managed and toggled on/off, allowing for multi-monitor setups without physical hardware. This driver is essential for VR desktop streaming, offering flexibility to display content inside a VR headset in steam theatre mode, enhancing remote desktop experiences, and enabling developers to test applications across multiple virtual screens. By adjusting display settings or enabling virtual monitors, users can optimize their VR and multitasking setups for various tasks.

Comparison with Other IDDs

The table below shows a comparison with other popular virtual display projects:
ProjectIddcx VersionSignedSDRHDRH-CursorTweakableARM64 SupportCustom EDIDFloating Point Refresh Rates
Virtual Display Driver1.10 (latest)✅✅ (8/10bit)✅ (8/10/12bit)✅✅✅✅✅
usbmmidd_v2-✅✅ (8bit)------
virtual-display-rs1.5-✅ (8bit)-#81✅---
parsec-vdd1.5✅✅ (8bit)-✅🆗---
IddSampleDriver1.2-✅ (8bit)------
RustDeskIddDriver1.2-✅ (8bit)------

Sponsors

Free code signing on Windows provided by SignPath.io, certificate by SignPath Foundation

Developers

The Virtual Display Driver project is maintained by a dedicated team of developers:
  • MikeTheTech: The project creator and overseer of the project "and great boss" (quote by Bud)
  • Bud: The core developer who handles most of the coding and implementation work of new features and optimizations.
  • Jocke: Focuses on writing PowerShell scripts and contributing to user support whilst also being the idea man.

Helping out!

We welcome contributions from the community! If you have any suggestions or improvements, please feel free to open an issue. Or if you'd like to donate to support our work, that would be greatly appreciated.

Star History Chart

License

This project is licensed under the MIT License. See the LICENSE file for more details.

 Add a custom footer

 Add a custom sidebar

Clone this wiki locally

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Strip utm_, fbclid, gclid, etc. from all links on page\n(function() {\n var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',\n 'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',\n 'ref', 'ref_src', 'source', 'medium', 'campaign'];\n \n function cleanUrl(url) {\n try {\n var u = new URL(url, window.location.origin);\n var changed = false;\n trackingParams.forEach(function(p) {\n if (u.searchParams.has(p)) {\n u.searchParams.delete(p);\n changed = true;\n }\n });\n return changed ? u.toString() : url;\n } catch (e) {\n return url;\n }\n }\n \n function cleanLinks() {\n document.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n \n cleanLinks();\n \n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1) {\n if (node.tagName === 'A') cleanLinks();\n node.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Remove Tracking Parameters from Links");
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content
Home
Jump to bottomEditNew page

Bud edited this page Dec 19, 2024
·
2 revisions
Virtual Display Driver

Overview
The Virtual Display Driver is a driver solution that enables the creation of virtual monitors on Windows 10 and 11 systems. These virtual monitors function just like physical displays, allowing users to extend their desktop environment, enhance remote work setups, support VR applications, and improve streaming and recording workflows.
This driver allows for the addition of high-resolution virtual displays, supporting resolutions from 640x480 up to 7680x4320 (8K), and a wide range of refresh rates, including 60Hz, 75Hz, 90Hz, 120Hz, 144Hz, 165Hz, and floating point ones like 59.99Hz.


Please note, some features are only available on later versions of Windows 11!

Features

  • Virtual Monitors: Add virtual monitors with resolutions from 640x480 to 7680x4320 (8K).
  • High Refresh Rates: Supports refresh rates including 60Hz, 75Hz, 90Hz, 120Hz, 144Hz, 165Hz, 240Hz, 480Hz, and 500Hz.
  • Compatibility: Works with VR, OBS, Sunshine, and other desktop sharing software.
  • Flexibility: Allows you to adjust resolutions and refresh rates beyond the capabilities of physical displays and configure it more than a lot of other virtual display drivers.

Usage

A virtual display driver simulates additional monitors in the system, enabling users to stream desktops to VR environments like Oculus or Sunshine. It creates virtual screens that can be managed and toggled on/off, allowing for multi-monitor setups without physical hardware. This driver is essential for VR desktop streaming, offering flexibility to display content inside a VR headset in steam theatre mode, enhancing remote desktop experiences, and enabling developers to test applications across multiple virtual screens. By adjusting display settings or enabling virtual monitors, users can optimize their VR and multitasking setups for various tasks.

Comparison with Other IDDs

The table below shows a comparison with other popular virtual display projects:
ProjectIddcx VersionSignedSDRHDRH-CursorTweakableARM64 SupportCustom EDIDFloating Point Refresh Rates
Virtual Display Driver1.10 (latest)✅✅ (8/10bit)✅ (8/10/12bit)✅✅✅✅✅
usbmmidd_v2-✅✅ (8bit)------
virtual-display-rs1.5-✅ (8bit)-#81✅---
parsec-vdd1.5✅✅ (8bit)-✅🆗---
IddSampleDriver1.2-✅ (8bit)------
RustDeskIddDriver1.2-✅ (8bit)------

Sponsors

Free code signing on Windows provided by SignPath.io, certificate by SignPath Foundation

Developers

The Virtual Display Driver project is maintained by a dedicated team of developers:
  • MikeTheTech: The project creator and overseer of the project "and great boss" (quote by Bud)
  • Bud: The core developer who handles most of the coding and implementation work of new features and optimizations.
  • Jocke: Focuses on writing PowerShell scripts and contributing to user support whilst also being the idea man.

Helping out!

We welcome contributions from the community! If you have any suggestions or improvements, please feel free to open an issue. Or if you'd like to donate to support our work, that would be greatly appreciated.

Star History Chart

License

This project is licensed under the MIT License. See the LICENSE file for more details.

 Add a custom footer

 Add a custom sidebar

Clone this wiki locally

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Auto-enable theater mode on YouTube\n(function() {\n function tryTheater() {\n var btn = document.querySelector('button[aria-label=\"Theater mode\"], ytd-player #player button[title=\"Theater mode\"]');\n if (btn && !btn.classList.contains('activated')) {\n btn.click();\n }\n }\n \n // Try immediately\n tryTheater();\n \n // Try after navigation (SPA)\n var lastUrl = location.href;\n setInterval(function() {\n if (location.href !== lastUrl) {\n lastUrl = location.href;\n setTimeout(tryTheater, 500);\n }\n }, 1000);\n \n // Also try on player load\n var observer = new MutationObserver(tryTheater);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "YouTube Theater Mode Default");
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
Home
Jump to bottomEditNew page

Bud edited this page Dec 19, 2024
·
2 revisions
Virtual Display Driver

Overview
The Virtual Display Driver is a driver solution that enables the creation of virtual monitors on Windows 10 and 11 systems. These virtual monitors function just like physical displays, allowing users to extend their desktop environment, enhance remote work setups, support VR applications, and improve streaming and recording workflows.
This driver allows for the addition of high-resolution virtual displays, supporting resolutions from 640x480 up to 7680x4320 (8K), and a wide range of refresh rates, including 60Hz, 75Hz, 90Hz, 120Hz, 144Hz, 165Hz, and floating point ones like 59.99Hz.


Please note, some features are only available on later versions of Windows 11!

Features

  • Virtual Monitors: Add virtual monitors with resolutions from 640x480 to 7680x4320 (8K).
  • High Refresh Rates: Supports refresh rates including 60Hz, 75Hz, 90Hz, 120Hz, 144Hz, 165Hz, 240Hz, 480Hz, and 500Hz.
  • Compatibility: Works with VR, OBS, Sunshine, and other desktop sharing software.
  • Flexibility: Allows you to adjust resolutions and refresh rates beyond the capabilities of physical displays and configure it more than a lot of other virtual display drivers.

Usage

A virtual display driver simulates additional monitors in the system, enabling users to stream desktops to VR environments like Oculus or Sunshine. It creates virtual screens that can be managed and toggled on/off, allowing for multi-monitor setups without physical hardware. This driver is essential for VR desktop streaming, offering flexibility to display content inside a VR headset in steam theatre mode, enhancing remote desktop experiences, and enabling developers to test applications across multiple virtual screens. By adjusting display settings or enabling virtual monitors, users can optimize their VR and multitasking setups for various tasks.

Comparison with Other IDDs

The table below shows a comparison with other popular virtual display projects:
ProjectIddcx VersionSignedSDRHDRH-CursorTweakableARM64 SupportCustom EDIDFloating Point Refresh Rates
Virtual Display Driver1.10 (latest)✅✅ (8/10bit)✅ (8/10/12bit)✅✅✅✅✅
usbmmidd_v2-✅✅ (8bit)------
virtual-display-rs1.5-✅ (8bit)-#81✅---
parsec-vdd1.5✅✅ (8bit)-✅🆗---
IddSampleDriver1.2-✅ (8bit)------
RustDeskIddDriver1.2-✅ (8bit)------

Sponsors

Free code signing on Windows provided by SignPath.io, certificate by SignPath Foundation

Developers

The Virtual Display Driver project is maintained by a dedicated team of developers:
  • MikeTheTech: The project creator and overseer of the project "and great boss" (quote by Bud)
  • Bud: The core developer who handles most of the coding and implementation work of new features and optimizations.
  • Jocke: Focuses on writing PowerShell scripts and contributing to user support whilst also being the idea man.

Helping out!

We welcome contributions from the community! If you have any suggestions or improvements, please feel free to open an issue. Or if you'd like to donate to support our work, that would be greatly appreciated.

Star History Chart

License

This project is licensed under the MIT License. See the LICENSE file for more details.

 Add a custom footer

 Add a custom sidebar

Clone this wiki locally

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Remove or un-stick sticky/fixed headers that block content\n(function() {\n function unstick() {\n document.querySelectorAll('header, nav, [role=\"banner\"], .header, .navbar, .sticky, .fixed-top, [style*=\"position: fixed\"], [style*=\"position:sticky\"]').forEach(function(el) {\n if (el.style.position === 'fixed' || el.style.position === 'sticky' || \n getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {\n el.style.position = 'static';\n el.style.top = 'auto';\n el.style.zIndex = 'auto';\n }\n });\n }\n \n unstick();\n \n var observer = new MutationObserver(unstick);\n observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });\n})();", "Kill Sticky Headers");
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
Home
Jump to bottomEditNew page

Bud edited this page Dec 19, 2024
·
2 revisions
Virtual Display Driver

Overview
The Virtual Display Driver is a driver solution that enables the creation of virtual monitors on Windows 10 and 11 systems. These virtual monitors function just like physical displays, allowing users to extend their desktop environment, enhance remote work setups, support VR applications, and improve streaming and recording workflows.
This driver allows for the addition of high-resolution virtual displays, supporting resolutions from 640x480 up to 7680x4320 (8K), and a wide range of refresh rates, including 60Hz, 75Hz, 90Hz, 120Hz, 144Hz, 165Hz, and floating point ones like 59.99Hz.


Please note, some features are only available on later versions of Windows 11!

Features

  • Virtual Monitors: Add virtual monitors with resolutions from 640x480 to 7680x4320 (8K).
  • High Refresh Rates: Supports refresh rates including 60Hz, 75Hz, 90Hz, 120Hz, 144Hz, 165Hz, 240Hz, 480Hz, and 500Hz.
  • Compatibility: Works with VR, OBS, Sunshine, and other desktop sharing software.
  • Flexibility: Allows you to adjust resolutions and refresh rates beyond the capabilities of physical displays and configure it more than a lot of other virtual display drivers.

Usage

A virtual display driver simulates additional monitors in the system, enabling users to stream desktops to VR environments like Oculus or Sunshine. It creates virtual screens that can be managed and toggled on/off, allowing for multi-monitor setups without physical hardware. This driver is essential for VR desktop streaming, offering flexibility to display content inside a VR headset in steam theatre mode, enhancing remote desktop experiences, and enabling developers to test applications across multiple virtual screens. By adjusting display settings or enabling virtual monitors, users can optimize their VR and multitasking setups for various tasks.

Comparison with Other IDDs

The table below shows a comparison with other popular virtual display projects:
ProjectIddcx VersionSignedSDRHDRH-CursorTweakableARM64 SupportCustom EDIDFloating Point Refresh Rates
Virtual Display Driver1.10 (latest)✅✅ (8/10bit)✅ (8/10/12bit)✅✅✅✅✅
usbmmidd_v2-✅✅ (8bit)------
virtual-display-rs1.5-✅ (8bit)-#81✅---
parsec-vdd1.5✅✅ (8bit)-✅🆗---
IddSampleDriver1.2-✅ (8bit)------
RustDeskIddDriver1.2-✅ (8bit)------

Sponsors

Free code signing on Windows provided by SignPath.io, certificate by SignPath Foundation

Developers

The Virtual Display Driver project is maintained by a dedicated team of developers:
  • MikeTheTech: The project creator and overseer of the project "and great boss" (quote by Bud)
  • Bud: The core developer who handles most of the coding and implementation work of new features and optimizations.
  • Jocke: Focuses on writing PowerShell scripts and contributing to user support whilst also being the idea man.

Helping out!

We welcome contributions from the community! If you have any suggestions or improvements, please feel free to open an issue. Or if you'd like to donate to support our work, that would be greatly appreciated.

Star History Chart

License

This project is licensed under the MIT License. See the LICENSE file for more details.

 Add a custom footer

 Add a custom sidebar

Clone this wiki locally

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Universal Dark Mode - works on any site\n(function() {\n var enabled = true;\n \n function applyDarkMode() {\n if (!enabled) return;\n \n // Create style element if it doesn't exist\n var style = document.getElementById('universal-dark-mode-style');\n if (!style) {\n style = document.createElement('style');\n style.id = 'universal-dark-mode-style';\n document.head.appendChild(style);\n }\n \n // Dark mode CSS - inverts colors but preserves images/video\n style.textContent = '\n /* Invert everything except media */\n html {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #1a1a2e !important;\n }\n \n /* Restore images, videos, iframes, canvas */\n img, video, iframe, canvas, svg, picture, [style*=\"background-image\"] {\n filter: invert(1) hue-rotate(180deg) !important;\n }\n \n /* Preserve specific elements that should not be inverted */\n .no-dark-mode, .no-dark-mode *,\n [data-theme=\"light\"], [data-theme=\"light\"],\n .ace_editor, .ace_editor *,\n .CodeMirror, .CodeMirror *,\n .monaco-editor, .monaco-editor *,\n .markdown-body pre, .markdown-body pre *,\n .highlight, .highlight *,\n pre code, pre code * {\n filter: none !important;\n }\n \n /* Fix common UI elements */\n .modal, .popup, .dropdown-menu, .tooltip, .popover {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #2d2d44 !important;\n border-color: #444 !important;\n }\n \n /* Scrollbars */\n ::-webkit-scrollbar { background: #1a1a2e !important; }\n ::-webkit-scrollbar-thumb { background: #444 !important; }\n ::-webkit-scrollbar-thumb:hover { background: #555 !important; }\n \n /* Selection */\n ::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ';\n }\n \n function removeDarkMode() {\n var style = document.getElementById('universal-dark-mode-style');\n if (style) style.remove();\n }\n \n // Toggle with Alt+Shift+D\n document.addEventListener('keydown', function(e) {\n if (e.altKey && e.shiftKey && e.key === 'D') {\n e.preventDefault();\n enabled = !enabled;\n if (enabled) {\n applyDarkMode();\n console.log('[Universal Dark Mode] Enabled');\n } else {\n removeDarkMode();\n console.log('[Universal Dark Mode] Disabled');\n }\n }\n });\n \n // Apply on load\n applyDarkMode();\n \n // Re-apply on dynamic content\n var observer = new MutationObserver(function(mutations) {\n if (enabled && !document.getElementById('universal-dark-mode-style')) {\n applyDarkMode();\n }\n });\n observer.observe(document.head, { childList: true });\n \n console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');\n})();", "Universal Dark Mode");
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content
Home
Jump to bottomEditNew page

Bud edited this page Dec 19, 2024
·
2 revisions
Virtual Display Driver

Overview
The Virtual Display Driver is a driver solution that enables the creation of virtual monitors on Windows 10 and 11 systems. These virtual monitors function just like physical displays, allowing users to extend their desktop environment, enhance remote work setups, support VR applications, and improve streaming and recording workflows.
This driver allows for the addition of high-resolution virtual displays, supporting resolutions from 640x480 up to 7680x4320 (8K), and a wide range of refresh rates, including 60Hz, 75Hz, 90Hz, 120Hz, 144Hz, 165Hz, and floating point ones like 59.99Hz.


Please note, some features are only available on later versions of Windows 11!

Features

  • Virtual Monitors: Add virtual monitors with resolutions from 640x480 to 7680x4320 (8K).
  • High Refresh Rates: Supports refresh rates including 60Hz, 75Hz, 90Hz, 120Hz, 144Hz, 165Hz, 240Hz, 480Hz, and 500Hz.
  • Compatibility: Works with VR, OBS, Sunshine, and other desktop sharing software.
  • Flexibility: Allows you to adjust resolutions and refresh rates beyond the capabilities of physical displays and configure it more than a lot of other virtual display drivers.

Usage

A virtual display driver simulates additional monitors in the system, enabling users to stream desktops to VR environments like Oculus or Sunshine. It creates virtual screens that can be managed and toggled on/off, allowing for multi-monitor setups without physical hardware. This driver is essential for VR desktop streaming, offering flexibility to display content inside a VR headset in steam theatre mode, enhancing remote desktop experiences, and enabling developers to test applications across multiple virtual screens. By adjusting display settings or enabling virtual monitors, users can optimize their VR and multitasking setups for various tasks.

Comparison with Other IDDs

The table below shows a comparison with other popular virtual display projects:
ProjectIddcx VersionSignedSDRHDRH-CursorTweakableARM64 SupportCustom EDIDFloating Point Refresh Rates
Virtual Display Driver1.10 (latest)✅✅ (8/10bit)✅ (8/10/12bit)✅✅✅✅✅
usbmmidd_v2-✅✅ (8bit)------
virtual-display-rs1.5-✅ (8bit)-#81✅---
parsec-vdd1.5✅✅ (8bit)-✅🆗---
IddSampleDriver1.2-✅ (8bit)------
RustDeskIddDriver1.2-✅ (8bit)------

Sponsors

Free code signing on Windows provided by SignPath.io, certificate by SignPath Foundation

Developers

The Virtual Display Driver project is maintained by a dedicated team of developers:
  • MikeTheTech: The project creator and overseer of the project "and great boss" (quote by Bud)
  • Bud: The core developer who handles most of the coding and implementation work of new features and optimizations.
  • Jocke: Focuses on writing PowerShell scripts and contributing to user support whilst also being the idea man.

Helping out!

We welcome contributions from the community! If you have any suggestions or improvements, please feel free to open an issue. Or if you'd like to donate to support our work, that would be greatly appreciated.

Star History Chart

License

This project is licensed under the MIT License. See the LICENSE file for more details.

 Add a custom footer

 Add a custom sidebar

Clone this wiki locally