Skip to content
BranchesTags

Repository files navigation

This repository contains the source files for the Prebid.js documentation site at Prebid.org.

Please see the sections below for more information.

Contributing

Thanks in advance for your contribution! Contributors are listed in the Thanks section below.

For smaller changes, such as fixing a typo or adding a new section to an existing page, submit a pull request.

For larger changes such as reorganizing the site and moving/removing content, you may want to open an issue so we can discuss the work beforehand. This is a good idea because:

  • We want to value your time, so you don't do unnecessary work
  • We want to value our users' time; we don't want to break links and bookmarks for users

License

All docs are under the license shown in the LICENSE file in this directory.

Prerequisites

The site uses Jekyll, which is written in the Ruby language.

To follow the instructions in the next section, you will need to install the Bundler Ruby gem.

Try the following command:

$ gem install bundler

If you are on a Mac and the above command fails with a permissions error (e.g., "ERROR: While executing gem ... You don't have write permissions for the /Library/Ruby/Gems/... directory."), try the following steps:

  1. Build your own ruby binary using Homebrew: brew install ruby. The Homebrew-built Ruby should include its own version of the gem command which avoids modifying system libraries.
  2. Try gem install bundler again. If it still fails, try sudo gem install bundler. After that, you should be able to avoid any further use of sudo by running bundler with the arguments shown in the next section.

Running Jekyll Locally

Before submitting a pull request, you should run the site locally to make sure your edits actually work.

To get started editing the site and seeing your changes, clone this repo and enter the following commands in your terminal:

  • cd /path/to/prebid.github.io

  • bundle install --path vendor/bundle

  • bundle exec jekyll serve

You should see output that looks something like this:

Configuration file: /Users/rloveland/Dropbox/Code/prebid.github.io/_config.yml Source: /Users/rloveland/Dropbox/Code/prebid.github.io Destination: /Users/rloveland/Dropbox/Code/prebid.github.io/_site Incremental build: disabled. Enable with --incremental Generating... done in 13.596 seconds. Auto-regeneration: enabled for '/Users/rloveland/Dropbox/Code/prebid.github.io' Configuration file: /Users/rloveland/Dropbox/Code/prebid.github.io/_config.yml Server address: http://127.0.0.1:8080/ Server running... press ctrl-c to stop. ... ...

Open the Server address URL in your browser, and you should see a locally running copy of the site.

Alphabetization of Bidder Adaptors

Please don't alphabetize the lists of adapters in your PR, either on the home page or the downloads page.

The adapters are not listed in alphabetical order, they're listed in the order in which they were added to the Prebid.js repo, using (approximately) this command in src/adapters:

for file in `ls | grep -f <(git ls-files)`; do
HASH=`git rev-list HEAD $file | tail -n 1`;
DATE=`git show -s --format="%ci" $HASH --`;
printf "%-35s %-35s %s\n" $file "$DATE" $HASH;
done | sort -d -k 2

The Downloads Page

Please don't submit PRs to the Prebid.org downloads page. That page gets updated in tandem with the Prebid.js release process.

The Downloads page is generated from the Markdown bidder adapter docs, so the process for updating is:

  1. Your adapter code is merged into Prebid.js
  2. Your bidder docs PR is submitted over here to the docs site
  3. Your adapter code is included with a release
  4. Once your adapter code is actually released, we merge the adapter docs PR, and the Downloads page is automagically updated with a checkbox to include your adapter.

This means an adaptor is not available to download from Prebid.org as soon as the code gets merged into Prebid.js - it will be available after the next release (usually in a couple of weeks).

Thanks

Many thanks to the following people who have submitted content to Prebid.org. We really appreciate the help!

In alphabetical order:

About

Repo that controls Prebid.org website

prebid.org

Resources

Readme
Apache-2.0 license
Activity

Stars

0 stars

Watchers

1 watching

Forks

0 forks
Report repository

Releases

Packages

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { // Add copy buttons to all 
 blocks
(function() {
function addCopyButtons() {
document.querySelectorAll('pre code').forEach(function(codeBlock) {
if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;
codeBlock.parentElement.setAttribute('data-copy-added', 'true');
var btn = document.createElement('button');
btn.textContent = 'Copy';
btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';
btn.onmouseover = function() { this.style.opacity = '1'; };
btn.onmouseout = function() { this.style.opacity = '0.7'; };
btn.onclick = function() {
navigator.clipboard.writeText(codeBlock.textContent).then(function() {
btn.textContent = 'Copied!';
setTimeout(function() { btn.textContent = 'Copy'; }, 1500);
});
};
codeBlock.parentElement.style.position = 'relative';
codeBlock.parentElement.appendChild(btn);
});
}
addCopyButtons();
// Re-run on dynamic content
var observer = new MutationObserver(addCopyButtons);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '
GitHub - aeliox/prebid.github.io: Repo that controls Prebid.org website · GitHub
Skip to content
BranchesTags
Repository files navigation
This repository contains the source files for the Prebid.js documentation site at Prebid.org.
Please see the sections below for more information.
Contributing
Thanks in advance for your contribution! Contributors are listed in the Thanks section below.
For smaller changes, such as fixing a typo or adding a new section to an existing page, submit a pull request.
For larger changes such as reorganizing the site and moving/removing content, you may want to open an issue so we can discuss the work beforehand. This is a good idea because:
  • We want to value your time, so you don't do unnecessary work
  • We want to value our users' time; we don't want to break links and bookmarks for users
License
All docs are under the license shown in the LICENSE file in this directory.
Prerequisites
The site uses Jekyll, which is written in the Ruby language.
To follow the instructions in the next section, you will need to install the Bundler Ruby gem.
Try the following command:
$ gem install bundler

If you are on a Mac and the above command fails with a permissions error (e.g., "ERROR: While executing gem ... You don't have write permissions for the /Library/Ruby/Gems/... directory."), try the following steps:
  1. Build your own ruby binary using Homebrew: brew install ruby. The Homebrew-built Ruby should include its own version of the gem command which avoids modifying system libraries.
  2. Try gem install bundler again. If it still fails, try sudo gem install bundler. After that, you should be able to avoid any further use of sudo by running bundler with the arguments shown in the next section.
Running Jekyll Locally
Before submitting a pull request, you should run the site locally to make sure your edits actually work.
To get started editing the site and seeing your changes, clone this repo and enter the following commands in your terminal:
  • cd /path/to/prebid.github.io
  • bundle install --path vendor/bundle
  • bundle exec jekyll serve
You should see output that looks something like this:
Configuration file: /Users/rloveland/Dropbox/Code/prebid.github.io/_config.yml Source: /Users/rloveland/Dropbox/Code/prebid.github.io Destination: /Users/rloveland/Dropbox/Code/prebid.github.io/_site Incremental build: disabled. Enable with --incremental Generating... done in 13.596 seconds. Auto-regeneration: enabled for '/Users/rloveland/Dropbox/Code/prebid.github.io' Configuration file: /Users/rloveland/Dropbox/Code/prebid.github.io/_config.yml Server address: http://127.0.0.1:8080/ Server running... press ctrl-c to stop. ... ... 
Open the Server address URL in your browser, and you should see a locally running copy of the site.
Alphabetization of Bidder Adaptors
Please don't alphabetize the lists of adapters in your PR, either on the home page or the downloads page.
The adapters are not listed in alphabetical order, they're listed in the order in which they were added to the Prebid.js repo, using (approximately) this command in src/adapters:
for file in `ls | grep -f <(git ls-files)`; do
HASH=`git rev-list HEAD $file | tail -n 1`;
DATE=`git show -s --format="%ci" $HASH --`;
printf "%-35s %-35s %s\n" $file "$DATE" $HASH;
done | sort -d -k 2

The Downloads Page
Please don't submit PRs to the Prebid.org downloads page. That page gets updated in tandem with the Prebid.js release process.
The Downloads page is generated from the Markdown bidder adapter docs, so the process for updating is:
  1. Your adapter code is merged into Prebid.js
  2. Your bidder docs PR is submitted over here to the docs site
  3. Your adapter code is included with a release
  4. Once your adapter code is actually released, we merge the adapter docs PR, and the Downloads page is automagically updated with a checkbox to include your adapter.
This means an adaptor is not available to download from Prebid.org as soon as the code gets merged into Prebid.js - it will be available after the next release (usually in a couple of weeks).
Thanks
Many thanks to the following people who have submitted content to Prebid.org. We really appreciate the help!
In alphabetical order:
About
Repo that controls Prebid.org website
prebid.org
Resources
Readme
Apache-2.0 license
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Force GitHub README to respect dark mode
(function() {
var style = document.createElement('style');
style.textContent = '
.markdown-body {
color-scheme: dark light;
}
.markdown-body pre { background: #161b22 !important; }
.markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }
.markdown-body table th, .markdown-body table td { border-color: #30363d !important; }
.markdown-body img { background: #0d1117; }
.markdown-body blockquote { border-left-color: #8b949e; }
.markdown-body hr { border-color: #30363d; }
';
document.head.appendChild(style);
})();
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
GitHub - aeliox/prebid.github.io: Repo that controls Prebid.org website · GitHub
Skip to content
BranchesTags
Repository files navigation
This repository contains the source files for the Prebid.js documentation site at Prebid.org.
Please see the sections below for more information.
Contributing
Thanks in advance for your contribution! Contributors are listed in the Thanks section below.
For smaller changes, such as fixing a typo or adding a new section to an existing page, submit a pull request.
For larger changes such as reorganizing the site and moving/removing content, you may want to open an issue so we can discuss the work beforehand. This is a good idea because:
  • We want to value your time, so you don't do unnecessary work
  • We want to value our users' time; we don't want to break links and bookmarks for users
License
All docs are under the license shown in the LICENSE file in this directory.
Prerequisites
The site uses Jekyll, which is written in the Ruby language.
To follow the instructions in the next section, you will need to install the Bundler Ruby gem.
Try the following command:
$ gem install bundler

If you are on a Mac and the above command fails with a permissions error (e.g., "ERROR: While executing gem ... You don't have write permissions for the /Library/Ruby/Gems/... directory."), try the following steps:
  1. Build your own ruby binary using Homebrew: brew install ruby. The Homebrew-built Ruby should include its own version of the gem command which avoids modifying system libraries.
  2. Try gem install bundler again. If it still fails, try sudo gem install bundler. After that, you should be able to avoid any further use of sudo by running bundler with the arguments shown in the next section.
Running Jekyll Locally
Before submitting a pull request, you should run the site locally to make sure your edits actually work.
To get started editing the site and seeing your changes, clone this repo and enter the following commands in your terminal:
  • cd /path/to/prebid.github.io
  • bundle install --path vendor/bundle
  • bundle exec jekyll serve
You should see output that looks something like this:
Configuration file: /Users/rloveland/Dropbox/Code/prebid.github.io/_config.yml Source: /Users/rloveland/Dropbox/Code/prebid.github.io Destination: /Users/rloveland/Dropbox/Code/prebid.github.io/_site Incremental build: disabled. Enable with --incremental Generating... done in 13.596 seconds. Auto-regeneration: enabled for '/Users/rloveland/Dropbox/Code/prebid.github.io' Configuration file: /Users/rloveland/Dropbox/Code/prebid.github.io/_config.yml Server address: http://127.0.0.1:8080/ Server running... press ctrl-c to stop. ... ... 
Open the Server address URL in your browser, and you should see a locally running copy of the site.
Alphabetization of Bidder Adaptors
Please don't alphabetize the lists of adapters in your PR, either on the home page or the downloads page.
The adapters are not listed in alphabetical order, they're listed in the order in which they were added to the Prebid.js repo, using (approximately) this command in src/adapters:
for file in `ls | grep -f <(git ls-files)`; do
HASH=`git rev-list HEAD $file | tail -n 1`;
DATE=`git show -s --format="%ci" $HASH --`;
printf "%-35s %-35s %s\n" $file "$DATE" $HASH;
done | sort -d -k 2

The Downloads Page
Please don't submit PRs to the Prebid.org downloads page. That page gets updated in tandem with the Prebid.js release process.
The Downloads page is generated from the Markdown bidder adapter docs, so the process for updating is:
  1. Your adapter code is merged into Prebid.js
  2. Your bidder docs PR is submitted over here to the docs site
  3. Your adapter code is included with a release
  4. Once your adapter code is actually released, we merge the adapter docs PR, and the Downloads page is automagically updated with a checkbox to include your adapter.
This means an adaptor is not available to download from Prebid.org as soon as the code gets merged into Prebid.js - it will be available after the next release (usually in a couple of weeks).
Thanks
Many thanks to the following people who have submitted content to Prebid.org. We really appreciate the help!
In alphabetical order:
About
Repo that controls Prebid.org website
prebid.org
Resources
Readme
Apache-2.0 license
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Highlight search terms from Google/DuckDuckGo/Bing referrer
(function() {
var ref = document.referrer;
var terms = [];
if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {
var url = new URL(ref);
var q = url.searchParams.get('q') || url.searchParams.get('p');
if (q) {
terms = q.split(/\s+/).filter(function(t) { return t.length > 2; });
}
}
if (terms.length === 0) return;
var style = document.createElement('style');
style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';
document.head.appendChild(style);
function highlight(node) {
if (node.nodeType === 3) { // text node
var text = node.textContent;
var found = false;
terms.forEach(function(term) {
var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\]\\]/g, '\\') + ')', 'gi');
if (regex.test(text)) {
found = true;
var frag = document.createDocumentFragment();
var parts = text.split(regex);
parts.forEach(function(part, i) {
if (i % 2 === 0) {
frag.appendChild(document.createTextNode(part));
} else {
var span = document.createElement('span');
span.className = 'userscript-highlight';
span.textContent = part;
frag.appendChild(span);
}
});
node.parentNode.replaceChild(frag, node);
}
});
} else if (node.nodeType === 1 && node.childNodes) { // element
var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];
if (!skipTags.includes(node.tagName)) {
Array.from(node.childNodes).forEach(highlight);
}
}
}
highlight(document.body);
// Re-highlight on dynamic content
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1 || node.nodeType === 3) highlight(node);
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
GitHub - aeliox/prebid.github.io: Repo that controls Prebid.org website · GitHub
Skip to content
BranchesTags
Repository files navigation
This repository contains the source files for the Prebid.js documentation site at Prebid.org.
Please see the sections below for more information.
Contributing
Thanks in advance for your contribution! Contributors are listed in the Thanks section below.
For smaller changes, such as fixing a typo or adding a new section to an existing page, submit a pull request.
For larger changes such as reorganizing the site and moving/removing content, you may want to open an issue so we can discuss the work beforehand. This is a good idea because:
  • We want to value your time, so you don't do unnecessary work
  • We want to value our users' time; we don't want to break links and bookmarks for users
License
All docs are under the license shown in the LICENSE file in this directory.
Prerequisites
The site uses Jekyll, which is written in the Ruby language.
To follow the instructions in the next section, you will need to install the Bundler Ruby gem.
Try the following command:
$ gem install bundler

If you are on a Mac and the above command fails with a permissions error (e.g., "ERROR: While executing gem ... You don't have write permissions for the /Library/Ruby/Gems/... directory."), try the following steps:
  1. Build your own ruby binary using Homebrew: brew install ruby. The Homebrew-built Ruby should include its own version of the gem command which avoids modifying system libraries.
  2. Try gem install bundler again. If it still fails, try sudo gem install bundler. After that, you should be able to avoid any further use of sudo by running bundler with the arguments shown in the next section.
Running Jekyll Locally
Before submitting a pull request, you should run the site locally to make sure your edits actually work.
To get started editing the site and seeing your changes, clone this repo and enter the following commands in your terminal:
  • cd /path/to/prebid.github.io
  • bundle install --path vendor/bundle
  • bundle exec jekyll serve
You should see output that looks something like this:
Configuration file: /Users/rloveland/Dropbox/Code/prebid.github.io/_config.yml Source: /Users/rloveland/Dropbox/Code/prebid.github.io Destination: /Users/rloveland/Dropbox/Code/prebid.github.io/_site Incremental build: disabled. Enable with --incremental Generating... done in 13.596 seconds. Auto-regeneration: enabled for '/Users/rloveland/Dropbox/Code/prebid.github.io' Configuration file: /Users/rloveland/Dropbox/Code/prebid.github.io/_config.yml Server address: http://127.0.0.1:8080/ Server running... press ctrl-c to stop. ... ... 
Open the Server address URL in your browser, and you should see a locally running copy of the site.
Alphabetization of Bidder Adaptors
Please don't alphabetize the lists of adapters in your PR, either on the home page or the downloads page.
The adapters are not listed in alphabetical order, they're listed in the order in which they were added to the Prebid.js repo, using (approximately) this command in src/adapters:
for file in `ls | grep -f <(git ls-files)`; do
HASH=`git rev-list HEAD $file | tail -n 1`;
DATE=`git show -s --format="%ci" $HASH --`;
printf "%-35s %-35s %s\n" $file "$DATE" $HASH;
done | sort -d -k 2

The Downloads Page
Please don't submit PRs to the Prebid.org downloads page. That page gets updated in tandem with the Prebid.js release process.
The Downloads page is generated from the Markdown bidder adapter docs, so the process for updating is:
  1. Your adapter code is merged into Prebid.js
  2. Your bidder docs PR is submitted over here to the docs site
  3. Your adapter code is included with a release
  4. Once your adapter code is actually released, we merge the adapter docs PR, and the Downloads page is automagically updated with a checkbox to include your adapter.
This means an adaptor is not available to download from Prebid.org as soon as the code gets merged into Prebid.js - it will be available after the next release (usually in a couple of weeks).
Thanks
Many thanks to the following people who have submitted content to Prebid.org. We really appreciate the help!
In alphabetical order:
About
Repo that controls Prebid.org website
prebid.org
Resources
Readme
Apache-2.0 license
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Strip utm_, fbclid, gclid, etc. from all links on page
(function() {
var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',
'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',
'ref', 'ref_src', 'source', 'medium', 'campaign'];
function cleanUrl(url) {
try {
var u = new URL(url, window.location.origin);
var changed = false;
trackingParams.forEach(function(p) {
if (u.searchParams.has(p)) {
u.searchParams.delete(p);
changed = true;
}
});
return changed ? u.toString() : url;
} catch (e) {
return url;
}
}
function cleanLinks() {
document.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
cleanLinks();
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1) {
if (node.tagName === 'A') cleanLinks();
node.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '
GitHub - aeliox/prebid.github.io: Repo that controls Prebid.org website · GitHub
Skip to content
BranchesTags
Repository files navigation
This repository contains the source files for the Prebid.js documentation site at Prebid.org.
Please see the sections below for more information.
Contributing
Thanks in advance for your contribution! Contributors are listed in the Thanks section below.
For smaller changes, such as fixing a typo or adding a new section to an existing page, submit a pull request.
For larger changes such as reorganizing the site and moving/removing content, you may want to open an issue so we can discuss the work beforehand. This is a good idea because:
  • We want to value your time, so you don't do unnecessary work
  • We want to value our users' time; we don't want to break links and bookmarks for users
License
All docs are under the license shown in the LICENSE file in this directory.
Prerequisites
The site uses Jekyll, which is written in the Ruby language.
To follow the instructions in the next section, you will need to install the Bundler Ruby gem.
Try the following command:
$ gem install bundler

If you are on a Mac and the above command fails with a permissions error (e.g., "ERROR: While executing gem ... You don't have write permissions for the /Library/Ruby/Gems/... directory."), try the following steps:
  1. Build your own ruby binary using Homebrew: brew install ruby. The Homebrew-built Ruby should include its own version of the gem command which avoids modifying system libraries.
  2. Try gem install bundler again. If it still fails, try sudo gem install bundler. After that, you should be able to avoid any further use of sudo by running bundler with the arguments shown in the next section.
Running Jekyll Locally
Before submitting a pull request, you should run the site locally to make sure your edits actually work.
To get started editing the site and seeing your changes, clone this repo and enter the following commands in your terminal:
  • cd /path/to/prebid.github.io
  • bundle install --path vendor/bundle
  • bundle exec jekyll serve
You should see output that looks something like this:
Configuration file: /Users/rloveland/Dropbox/Code/prebid.github.io/_config.yml Source: /Users/rloveland/Dropbox/Code/prebid.github.io Destination: /Users/rloveland/Dropbox/Code/prebid.github.io/_site Incremental build: disabled. Enable with --incremental Generating... done in 13.596 seconds. Auto-regeneration: enabled for '/Users/rloveland/Dropbox/Code/prebid.github.io' Configuration file: /Users/rloveland/Dropbox/Code/prebid.github.io/_config.yml Server address: http://127.0.0.1:8080/ Server running... press ctrl-c to stop. ... ... 
Open the Server address URL in your browser, and you should see a locally running copy of the site.
Alphabetization of Bidder Adaptors
Please don't alphabetize the lists of adapters in your PR, either on the home page or the downloads page.
The adapters are not listed in alphabetical order, they're listed in the order in which they were added to the Prebid.js repo, using (approximately) this command in src/adapters:
for file in `ls | grep -f <(git ls-files)`; do
HASH=`git rev-list HEAD $file | tail -n 1`;
DATE=`git show -s --format="%ci" $HASH --`;
printf "%-35s %-35s %s\n" $file "$DATE" $HASH;
done | sort -d -k 2

The Downloads Page
Please don't submit PRs to the Prebid.org downloads page. That page gets updated in tandem with the Prebid.js release process.
The Downloads page is generated from the Markdown bidder adapter docs, so the process for updating is:
  1. Your adapter code is merged into Prebid.js
  2. Your bidder docs PR is submitted over here to the docs site
  3. Your adapter code is included with a release
  4. Once your adapter code is actually released, we merge the adapter docs PR, and the Downloads page is automagically updated with a checkbox to include your adapter.
This means an adaptor is not available to download from Prebid.org as soon as the code gets merged into Prebid.js - it will be available after the next release (usually in a couple of weeks).
Thanks
Many thanks to the following people who have submitted content to Prebid.org. We really appreciate the help!
In alphabetical order:
About
Repo that controls Prebid.org website
prebid.org
Resources
Readme
Apache-2.0 license
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Auto-enable theater mode on YouTube
(function() {
function tryTheater() {
var btn = document.querySelector('button[aria-label="Theater mode"], ytd-player #player button[title="Theater mode"]');
if (btn && !btn.classList.contains('activated')) {
btn.click();
}
}
// Try immediately
tryTheater();
// Try after navigation (SPA)
var lastUrl = location.href;
setInterval(function() {
if (location.href !== lastUrl) {
lastUrl = location.href;
setTimeout(tryTheater, 500);
}
}, 1000);
// Also try on player load
var observer = new MutationObserver(tryTheater);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
GitHub - aeliox/prebid.github.io: Repo that controls Prebid.org website · GitHub
Skip to content
BranchesTags
Repository files navigation
This repository contains the source files for the Prebid.js documentation site at Prebid.org.
Please see the sections below for more information.
Contributing
Thanks in advance for your contribution! Contributors are listed in the Thanks section below.
For smaller changes, such as fixing a typo or adding a new section to an existing page, submit a pull request.
For larger changes such as reorganizing the site and moving/removing content, you may want to open an issue so we can discuss the work beforehand. This is a good idea because:
  • We want to value your time, so you don't do unnecessary work
  • We want to value our users' time; we don't want to break links and bookmarks for users
License
All docs are under the license shown in the LICENSE file in this directory.
Prerequisites
The site uses Jekyll, which is written in the Ruby language.
To follow the instructions in the next section, you will need to install the Bundler Ruby gem.
Try the following command:
$ gem install bundler

If you are on a Mac and the above command fails with a permissions error (e.g., "ERROR: While executing gem ... You don't have write permissions for the /Library/Ruby/Gems/... directory."), try the following steps:
  1. Build your own ruby binary using Homebrew: brew install ruby. The Homebrew-built Ruby should include its own version of the gem command which avoids modifying system libraries.
  2. Try gem install bundler again. If it still fails, try sudo gem install bundler. After that, you should be able to avoid any further use of sudo by running bundler with the arguments shown in the next section.
Running Jekyll Locally
Before submitting a pull request, you should run the site locally to make sure your edits actually work.
To get started editing the site and seeing your changes, clone this repo and enter the following commands in your terminal:
  • cd /path/to/prebid.github.io
  • bundle install --path vendor/bundle
  • bundle exec jekyll serve
You should see output that looks something like this:
Configuration file: /Users/rloveland/Dropbox/Code/prebid.github.io/_config.yml Source: /Users/rloveland/Dropbox/Code/prebid.github.io Destination: /Users/rloveland/Dropbox/Code/prebid.github.io/_site Incremental build: disabled. Enable with --incremental Generating... done in 13.596 seconds. Auto-regeneration: enabled for '/Users/rloveland/Dropbox/Code/prebid.github.io' Configuration file: /Users/rloveland/Dropbox/Code/prebid.github.io/_config.yml Server address: http://127.0.0.1:8080/ Server running... press ctrl-c to stop. ... ... 
Open the Server address URL in your browser, and you should see a locally running copy of the site.
Alphabetization of Bidder Adaptors
Please don't alphabetize the lists of adapters in your PR, either on the home page or the downloads page.
The adapters are not listed in alphabetical order, they're listed in the order in which they were added to the Prebid.js repo, using (approximately) this command in src/adapters:
for file in `ls | grep -f <(git ls-files)`; do
HASH=`git rev-list HEAD $file | tail -n 1`;
DATE=`git show -s --format="%ci" $HASH --`;
printf "%-35s %-35s %s\n" $file "$DATE" $HASH;
done | sort -d -k 2

The Downloads Page
Please don't submit PRs to the Prebid.org downloads page. That page gets updated in tandem with the Prebid.js release process.
The Downloads page is generated from the Markdown bidder adapter docs, so the process for updating is:
  1. Your adapter code is merged into Prebid.js
  2. Your bidder docs PR is submitted over here to the docs site
  3. Your adapter code is included with a release
  4. Once your adapter code is actually released, we merge the adapter docs PR, and the Downloads page is automagically updated with a checkbox to include your adapter.
This means an adaptor is not available to download from Prebid.org as soon as the code gets merged into Prebid.js - it will be available after the next release (usually in a couple of weeks).
Thanks
Many thanks to the following people who have submitted content to Prebid.org. We really appreciate the help!
In alphabetical order:
About
Repo that controls Prebid.org website
prebid.org
Resources
Readme
Apache-2.0 license
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Remove or un-stick sticky/fixed headers that block content
(function() {
function unstick() {
document.querySelectorAll('header, nav, [role="banner"], .header, .navbar, .sticky, .fixed-top, [style*="position: fixed"], [style*="position:sticky"]').forEach(function(el) {
if (el.style.position === 'fixed' || el.style.position === 'sticky' || getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {
el.style.position = 'static';
el.style.top = 'auto';
el.style.zIndex = 'auto';
}
});
}
unstick();
var observer = new MutationObserver(unstick);
observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });
})();
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
GitHub - aeliox/prebid.github.io: Repo that controls Prebid.org website · GitHub
Skip to content
BranchesTags
Repository files navigation
This repository contains the source files for the Prebid.js documentation site at Prebid.org.
Please see the sections below for more information.
Contributing
Thanks in advance for your contribution! Contributors are listed in the Thanks section below.
For smaller changes, such as fixing a typo or adding a new section to an existing page, submit a pull request.
For larger changes such as reorganizing the site and moving/removing content, you may want to open an issue so we can discuss the work beforehand. This is a good idea because:
  • We want to value your time, so you don't do unnecessary work
  • We want to value our users' time; we don't want to break links and bookmarks for users
License
All docs are under the license shown in the LICENSE file in this directory.
Prerequisites
The site uses Jekyll, which is written in the Ruby language.
To follow the instructions in the next section, you will need to install the Bundler Ruby gem.
Try the following command:
$ gem install bundler

If you are on a Mac and the above command fails with a permissions error (e.g., "ERROR: While executing gem ... You don't have write permissions for the /Library/Ruby/Gems/... directory."), try the following steps:
  1. Build your own ruby binary using Homebrew: brew install ruby. The Homebrew-built Ruby should include its own version of the gem command which avoids modifying system libraries.
  2. Try gem install bundler again. If it still fails, try sudo gem install bundler. After that, you should be able to avoid any further use of sudo by running bundler with the arguments shown in the next section.
Running Jekyll Locally
Before submitting a pull request, you should run the site locally to make sure your edits actually work.
To get started editing the site and seeing your changes, clone this repo and enter the following commands in your terminal:
  • cd /path/to/prebid.github.io
  • bundle install --path vendor/bundle
  • bundle exec jekyll serve
You should see output that looks something like this:
Configuration file: /Users/rloveland/Dropbox/Code/prebid.github.io/_config.yml Source: /Users/rloveland/Dropbox/Code/prebid.github.io Destination: /Users/rloveland/Dropbox/Code/prebid.github.io/_site Incremental build: disabled. Enable with --incremental Generating... done in 13.596 seconds. Auto-regeneration: enabled for '/Users/rloveland/Dropbox/Code/prebid.github.io' Configuration file: /Users/rloveland/Dropbox/Code/prebid.github.io/_config.yml Server address: http://127.0.0.1:8080/ Server running... press ctrl-c to stop. ... ... 
Open the Server address URL in your browser, and you should see a locally running copy of the site.
Alphabetization of Bidder Adaptors
Please don't alphabetize the lists of adapters in your PR, either on the home page or the downloads page.
The adapters are not listed in alphabetical order, they're listed in the order in which they were added to the Prebid.js repo, using (approximately) this command in src/adapters:
for file in `ls | grep -f <(git ls-files)`; do
HASH=`git rev-list HEAD $file | tail -n 1`;
DATE=`git show -s --format="%ci" $HASH --`;
printf "%-35s %-35s %s\n" $file "$DATE" $HASH;
done | sort -d -k 2

The Downloads Page
Please don't submit PRs to the Prebid.org downloads page. That page gets updated in tandem with the Prebid.js release process.
The Downloads page is generated from the Markdown bidder adapter docs, so the process for updating is:
  1. Your adapter code is merged into Prebid.js
  2. Your bidder docs PR is submitted over here to the docs site
  3. Your adapter code is included with a release
  4. Once your adapter code is actually released, we merge the adapter docs PR, and the Downloads page is automagically updated with a checkbox to include your adapter.
This means an adaptor is not available to download from Prebid.org as soon as the code gets merged into Prebid.js - it will be available after the next release (usually in a couple of weeks).
Thanks
Many thanks to the following people who have submitted content to Prebid.org. We really appreciate the help!
In alphabetical order:
About
Repo that controls Prebid.org website
prebid.org
Resources
Readme
Apache-2.0 license
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Universal Dark Mode - works on any site
(function() {
var enabled = true;
function applyDarkMode() {
if (!enabled) return;
// Create style element if it doesn't exist
var style = document.getElementById('universal-dark-mode-style');
if (!style) {
style = document.createElement('style');
style.id = 'universal-dark-mode-style';
document.head.appendChild(style);
}
// Dark mode CSS - inverts colors but preserves images/video
style.textContent = '
/* Invert everything except media */
html {
filter: invert(1) hue-rotate(180deg) !important;
background: #1a1a2e !important;
}
/* Restore images, videos, iframes, canvas */
img, video, iframe, canvas, svg, picture, [style*="background-image"] {
filter: invert(1) hue-rotate(180deg) !important;
}
/* Preserve specific elements that should not be inverted */
.no-dark-mode, .no-dark-mode *,
[data-theme="light"], [data-theme="light"],
.ace_editor, .ace_editor *,
.CodeMirror, .CodeMirror *,
.monaco-editor, .monaco-editor *,
.markdown-body pre, .markdown-body pre *,
.highlight, .highlight *,
pre code, pre code * {
filter: none !important;
}
/* Fix common UI elements */
.modal, .popup, .dropdown-menu, .tooltip, .popover {
filter: invert(1) hue-rotate(180deg) !important;
background: #2d2d44 !important;
border-color: #444 !important;
}
/* Scrollbars */
::-webkit-scrollbar { background: #1a1a2e !important; }
::-webkit-scrollbar-thumb { background: #444 !important; }
::-webkit-scrollbar-thumb:hover { background: #555 !important; }
/* Selection */
::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }
::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }
';
}
function removeDarkMode() {
var style = document.getElementById('universal-dark-mode-style');
if (style) style.remove();
}
// Toggle with Alt+Shift+D
document.addEventListener('keydown', function(e) {
if (e.altKey && e.shiftKey && e.key === 'D') {
e.preventDefault();
enabled = !enabled;
if (enabled) {
applyDarkMode();
console.log('[Universal Dark Mode] Enabled');
} else {
removeDarkMode();
console.log('[Universal Dark Mode] Disabled');
}
}
});
// Apply on load
applyDarkMode();
// Re-apply on dynamic content
var observer = new MutationObserver(function(mutations) {
if (enabled && !document.getElementById('universal-dark-mode-style')) {
applyDarkMode();
}
});
observer.observe(document.head, { childList: true });
console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');
})();
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();
GitHub - aeliox/prebid.github.io: Repo that controls Prebid.org website · GitHub
Skip to content
BranchesTags
Repository files navigation
This repository contains the source files for the Prebid.js documentation site at Prebid.org.
Please see the sections below for more information.
Contributing
Thanks in advance for your contribution! Contributors are listed in the Thanks section below.
For smaller changes, such as fixing a typo or adding a new section to an existing page, submit a pull request.
For larger changes such as reorganizing the site and moving/removing content, you may want to open an issue so we can discuss the work beforehand. This is a good idea because:
  • We want to value your time, so you don't do unnecessary work
  • We want to value our users' time; we don't want to break links and bookmarks for users
License
All docs are under the license shown in the LICENSE file in this directory.
Prerequisites
The site uses Jekyll, which is written in the Ruby language.
To follow the instructions in the next section, you will need to install the Bundler Ruby gem.
Try the following command:
$ gem install bundler

If you are on a Mac and the above command fails with a permissions error (e.g., "ERROR: While executing gem ... You don't have write permissions for the /Library/Ruby/Gems/... directory."), try the following steps:
  1. Build your own ruby binary using Homebrew: brew install ruby. The Homebrew-built Ruby should include its own version of the gem command which avoids modifying system libraries.
  2. Try gem install bundler again. If it still fails, try sudo gem install bundler. After that, you should be able to avoid any further use of sudo by running bundler with the arguments shown in the next section.
Running Jekyll Locally
Before submitting a pull request, you should run the site locally to make sure your edits actually work.
To get started editing the site and seeing your changes, clone this repo and enter the following commands in your terminal:
  • cd /path/to/prebid.github.io
  • bundle install --path vendor/bundle
  • bundle exec jekyll serve
You should see output that looks something like this:
Configuration file: /Users/rloveland/Dropbox/Code/prebid.github.io/_config.yml Source: /Users/rloveland/Dropbox/Code/prebid.github.io Destination: /Users/rloveland/Dropbox/Code/prebid.github.io/_site Incremental build: disabled. Enable with --incremental Generating... done in 13.596 seconds. Auto-regeneration: enabled for '/Users/rloveland/Dropbox/Code/prebid.github.io' Configuration file: /Users/rloveland/Dropbox/Code/prebid.github.io/_config.yml Server address: http://127.0.0.1:8080/ Server running... press ctrl-c to stop. ... ... 
Open the Server address URL in your browser, and you should see a locally running copy of the site.
Alphabetization of Bidder Adaptors
Please don't alphabetize the lists of adapters in your PR, either on the home page or the downloads page.
The adapters are not listed in alphabetical order, they're listed in the order in which they were added to the Prebid.js repo, using (approximately) this command in src/adapters:
for file in `ls | grep -f <(git ls-files)`; do
HASH=`git rev-list HEAD $file | tail -n 1`;
DATE=`git show -s --format="%ci" $HASH --`;
printf "%-35s %-35s %s\n" $file "$DATE" $HASH;
done | sort -d -k 2

The Downloads Page
Please don't submit PRs to the Prebid.org downloads page. That page gets updated in tandem with the Prebid.js release process.
The Downloads page is generated from the Markdown bidder adapter docs, so the process for updating is:
  1. Your adapter code is merged into Prebid.js
  2. Your bidder docs PR is submitted over here to the docs site
  3. Your adapter code is included with a release
  4. Once your adapter code is actually released, we merge the adapter docs PR, and the Downloads page is automagically updated with a checkbox to include your adapter.
This means an adaptor is not available to download from Prebid.org as soon as the code gets merged into Prebid.js - it will be available after the next release (usually in a couple of weeks).
Thanks
Many thanks to the following people who have submitted content to Prebid.org. We really appreciate the help!
In alphabetical order:
About
Repo that controls Prebid.org website
prebid.org
Resources
Readme
Apache-2.0 license
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages