BranchesTags

Repository files navigation

PullToRefreshView

A simple Swift implementation of a pull-to-refresh control, for use with UITableView.

VersionLicensePlatform

Installation

Manual

Add the PullToRefreshView.swift file to your Xcode project, then follow the steps in the Basic Use section below. This file can be found in the PullToRefreshViewDotSwift/Classes directory.

CocoaPods

PullToRefreshView is available through CocoaPods. To install it, simply add the following line to your Podfile:

pod"PullToRefreshViewDotSwift"

Basic Use

// Add the control to the table view, // and specify what should be done when it's triggered.
self.tableView.installPullToRefreshViewWithHandler{[weak self](pullToRefreshView)inself?.performSomeLongRunningOperation(input, handler:{(output, error)inDispatchQueue.main.async{
pullToRefreshView.endRefreshing()}})}
// To manually trigger the refresh animation.
self.tableView.pullToRefreshView()?.beginRefreshing()

Note

By default, each call to beginRefreshing() increments an internal counter, and calling endRefreshing() decrements that same counter. This prevents the animation from triggering multiple times if calling beginRefreshing() from more than one function in your code.

To force-hide the view, you can call endRefreshing(force: true), which will reset the counter and hide the view, regardless of any unbalanced calls to begin/end refreshing.

Advanced Use

Custom UI

A UIActivityIndicatorView is used, by default, to mimic UIRefreshControl. However, if you would like to customise your UI, you can add subviews to the public contentView.

// Add some custom UI to the content view.
self.tableView.pullToRefreshView()?.contentView.addSubview(self.myCustomView)
// Optionally, hide the default UIActivityIndicatorView.
self.tableView.pullToRefreshView()?.spinnerView.isHidden =true

Animations

You can set your own animation handlers, as follows:

self.tableView.pullToRefreshView()?.refreshDidStartAnimationHandler ={[weak self](pullToRefreshView)in
// Perform some custom animation.
}self.tableView.pullToRefreshView()?.refreshDidStopAnimationHandler ={[weak self](pullToRefreshView)in
// Stop your custom animation.
}

Here's an example custom animation that I use in the Galway Bus Abú app:

alt text

About

A simple Swift implementation of a pull-to-refresh control, for use with UITableView.

Resources

Readme
MIT license
Activity

Stars

1 star

Watchers

1 watching

Forks

1 fork
Report repository

Releases

Packages

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { injectUserscript("// Add copy buttons to all 
 blocks\n(function() {\n function addCopyButtons() {\n document.querySelectorAll('pre code').forEach(function(codeBlock) {\n if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;\n codeBlock.parentElement.setAttribute('data-copy-added', 'true');\n \n var btn = document.createElement('button');\n btn.textContent = 'Copy';\n btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';\n btn.onmouseover = function() { this.style.opacity = '1'; };\n btn.onmouseout = function() { this.style.opacity = '0.7'; };\n btn.onclick = function() {\n navigator.clipboard.writeText(codeBlock.textContent).then(function() {\n btn.textContent = 'Copied!';\n setTimeout(function() { btn.textContent = 'Copy'; }, 1500);\n });\n };\n codeBlock.parentElement.style.position = 'relative';\n codeBlock.parentElement.appendChild(btn);\n });\n }\n \n addCopyButtons();\n \n // Re-run on dynamic content\n var observer = new MutationObserver(addCopyButtons);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Add Copy Buttons to Code Blocks");
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content
BranchesTags
Repository files navigation
PullToRefreshView
A simple Swift implementation of a pull-to-refresh control, for use with UITableView.
VersionLicensePlatform
Installation
Manual
Add the PullToRefreshView.swift file to your Xcode project, then follow the steps in the Basic Use section below. This file can be found in the PullToRefreshViewDotSwift/Classes directory.
CocoaPods
PullToRefreshView is available through CocoaPods. To install
it, simply add the following line to your Podfile:
pod"PullToRefreshViewDotSwift"
Basic Use
// Add the control to the table view, // and specify what should be done when it's triggered.
self.tableView.installPullToRefreshViewWithHandler{[weak self](pullToRefreshView)inself?.performSomeLongRunningOperation(input, handler:{(output, error)inDispatchQueue.main.async{
pullToRefreshView.endRefreshing()}})}
// To manually trigger the refresh animation.
self.tableView.pullToRefreshView()?.beginRefreshing()
Note
By default, each call to beginRefreshing() increments an internal counter, and calling endRefreshing() decrements that same counter. This prevents the animation from triggering multiple times if calling beginRefreshing() from more than one function in your code.
To force-hide the view, you can call endRefreshing(force: true), which will reset the counter and hide the view, regardless of any unbalanced calls to begin/end refreshing.
Advanced Use
Custom UI
A UIActivityIndicatorView is used, by default, to mimic UIRefreshControl. However, if you would like to customise your UI, you can add subviews to the public contentView.
// Add some custom UI to the content view.
self.tableView.pullToRefreshView()?.contentView.addSubview(self.myCustomView)
// Optionally, hide the default UIActivityIndicatorView.
self.tableView.pullToRefreshView()?.spinnerView.isHidden =true
Animations
You can set your own animation handlers, as follows:
self.tableView.pullToRefreshView()?.refreshDidStartAnimationHandler ={[weak self](pullToRefreshView)in
// Perform some custom animation.
}self.tableView.pullToRefreshView()?.refreshDidStopAnimationHandler ={[weak self](pullToRefreshView)in
// Stop your custom animation.
}
Here's an example custom animation that I use in the Galway Bus Abú app:
alt text
About
A simple Swift implementation of a pull-to-refresh control, for use with UITableView.
Resources
Readme
MIT license
Activity
Stars
1 star
Watchers
1 watching
Forks
1 fork
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Force GitHub README to respect dark mode\n(function() {\n var style = document.createElement('style');\n style.textContent = '\n .markdown-body {\n color-scheme: dark light;\n }\n .markdown-body pre { background: #161b22 !important; }\n .markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }\n .markdown-body table th, .markdown-body table td { border-color: #30363d !important; }\n .markdown-body img { background: #0d1117; }\n .markdown-body blockquote { border-left-color: #8b949e; }\n .markdown-body hr { border-color: #30363d; }\n ';\n document.head.appendChild(style);\n})();", "GitHub Dark Mode README Fix");
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
PullToRefreshView
A simple Swift implementation of a pull-to-refresh control, for use with UITableView.
VersionLicensePlatform
Installation
Manual
Add the PullToRefreshView.swift file to your Xcode project, then follow the steps in the Basic Use section below. This file can be found in the PullToRefreshViewDotSwift/Classes directory.
CocoaPods
PullToRefreshView is available through CocoaPods. To install
it, simply add the following line to your Podfile:
pod"PullToRefreshViewDotSwift"
Basic Use
// Add the control to the table view, // and specify what should be done when it's triggered.
self.tableView.installPullToRefreshViewWithHandler{[weak self](pullToRefreshView)inself?.performSomeLongRunningOperation(input, handler:{(output, error)inDispatchQueue.main.async{
pullToRefreshView.endRefreshing()}})}
// To manually trigger the refresh animation.
self.tableView.pullToRefreshView()?.beginRefreshing()
Note
By default, each call to beginRefreshing() increments an internal counter, and calling endRefreshing() decrements that same counter. This prevents the animation from triggering multiple times if calling beginRefreshing() from more than one function in your code.
To force-hide the view, you can call endRefreshing(force: true), which will reset the counter and hide the view, regardless of any unbalanced calls to begin/end refreshing.
Advanced Use
Custom UI
A UIActivityIndicatorView is used, by default, to mimic UIRefreshControl. However, if you would like to customise your UI, you can add subviews to the public contentView.
// Add some custom UI to the content view.
self.tableView.pullToRefreshView()?.contentView.addSubview(self.myCustomView)
// Optionally, hide the default UIActivityIndicatorView.
self.tableView.pullToRefreshView()?.spinnerView.isHidden =true
Animations
You can set your own animation handlers, as follows:
self.tableView.pullToRefreshView()?.refreshDidStartAnimationHandler ={[weak self](pullToRefreshView)in
// Perform some custom animation.
}self.tableView.pullToRefreshView()?.refreshDidStopAnimationHandler ={[weak self](pullToRefreshView)in
// Stop your custom animation.
}
Here's an example custom animation that I use in the Galway Bus Abú app:
alt text
About
A simple Swift implementation of a pull-to-refresh control, for use with UITableView.
Resources
Readme
MIT license
Activity
Stars
1 star
Watchers
1 watching
Forks
1 fork
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Highlight search terms from Google/DuckDuckGo/Bing referrer\n(function() {\n var ref = document.referrer;\n var terms = [];\n \n if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {\n var url = new URL(ref);\n var q = url.searchParams.get('q') || url.searchParams.get('p');\n if (q) {\n terms = q.split(/\\s+/).filter(function(t) { return t.length > 2; });\n }\n }\n \n if (terms.length === 0) return;\n \n var style = document.createElement('style');\n style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';\n document.head.appendChild(style);\n \n function highlight(node) {\n if (node.nodeType === 3) { // text node\n var text = node.textContent;\n var found = false;\n terms.forEach(function(term) {\n var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\\]\\\\]/g, '\\\\') + ')', 'gi');\n if (regex.test(text)) {\n found = true;\n var frag = document.createDocumentFragment();\n var parts = text.split(regex);\n parts.forEach(function(part, i) {\n if (i % 2 === 0) {\n frag.appendChild(document.createTextNode(part));\n } else {\n var span = document.createElement('span');\n span.className = 'userscript-highlight';\n span.textContent = part;\n frag.appendChild(span);\n }\n });\n node.parentNode.replaceChild(frag, node);\n }\n });\n } else if (node.nodeType === 1 && node.childNodes) { // element\n var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];\n if (!skipTags.includes(node.tagName)) {\n Array.from(node.childNodes).forEach(highlight);\n }\n }\n }\n \n highlight(document.body);\n \n // Re-highlight on dynamic content\n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1 || node.nodeType === 3) highlight(node);\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Highlight Search Terms");
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
PullToRefreshView
A simple Swift implementation of a pull-to-refresh control, for use with UITableView.
VersionLicensePlatform
Installation
Manual
Add the PullToRefreshView.swift file to your Xcode project, then follow the steps in the Basic Use section below. This file can be found in the PullToRefreshViewDotSwift/Classes directory.
CocoaPods
PullToRefreshView is available through CocoaPods. To install
it, simply add the following line to your Podfile:
pod"PullToRefreshViewDotSwift"
Basic Use
// Add the control to the table view, // and specify what should be done when it's triggered.
self.tableView.installPullToRefreshViewWithHandler{[weak self](pullToRefreshView)inself?.performSomeLongRunningOperation(input, handler:{(output, error)inDispatchQueue.main.async{
pullToRefreshView.endRefreshing()}})}
// To manually trigger the refresh animation.
self.tableView.pullToRefreshView()?.beginRefreshing()
Note
By default, each call to beginRefreshing() increments an internal counter, and calling endRefreshing() decrements that same counter. This prevents the animation from triggering multiple times if calling beginRefreshing() from more than one function in your code.
To force-hide the view, you can call endRefreshing(force: true), which will reset the counter and hide the view, regardless of any unbalanced calls to begin/end refreshing.
Advanced Use
Custom UI
A UIActivityIndicatorView is used, by default, to mimic UIRefreshControl. However, if you would like to customise your UI, you can add subviews to the public contentView.
// Add some custom UI to the content view.
self.tableView.pullToRefreshView()?.contentView.addSubview(self.myCustomView)
// Optionally, hide the default UIActivityIndicatorView.
self.tableView.pullToRefreshView()?.spinnerView.isHidden =true
Animations
You can set your own animation handlers, as follows:
self.tableView.pullToRefreshView()?.refreshDidStartAnimationHandler ={[weak self](pullToRefreshView)in
// Perform some custom animation.
}self.tableView.pullToRefreshView()?.refreshDidStopAnimationHandler ={[weak self](pullToRefreshView)in
// Stop your custom animation.
}
Here's an example custom animation that I use in the Galway Bus Abú app:
alt text
About
A simple Swift implementation of a pull-to-refresh control, for use with UITableView.
Resources
Readme
MIT license
Activity
Stars
1 star
Watchers
1 watching
Forks
1 fork
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Strip utm_, fbclid, gclid, etc. from all links on page\n(function() {\n var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',\n 'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',\n 'ref', 'ref_src', 'source', 'medium', 'campaign'];\n \n function cleanUrl(url) {\n try {\n var u = new URL(url, window.location.origin);\n var changed = false;\n trackingParams.forEach(function(p) {\n if (u.searchParams.has(p)) {\n u.searchParams.delete(p);\n changed = true;\n }\n });\n return changed ? u.toString() : url;\n } catch (e) {\n return url;\n }\n }\n \n function cleanLinks() {\n document.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n \n cleanLinks();\n \n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1) {\n if (node.tagName === 'A') cleanLinks();\n node.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Remove Tracking Parameters from Links");
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content
BranchesTags
Repository files navigation
PullToRefreshView
A simple Swift implementation of a pull-to-refresh control, for use with UITableView.
VersionLicensePlatform
Installation
Manual
Add the PullToRefreshView.swift file to your Xcode project, then follow the steps in the Basic Use section below. This file can be found in the PullToRefreshViewDotSwift/Classes directory.
CocoaPods
PullToRefreshView is available through CocoaPods. To install
it, simply add the following line to your Podfile:
pod"PullToRefreshViewDotSwift"
Basic Use
// Add the control to the table view, // and specify what should be done when it's triggered.
self.tableView.installPullToRefreshViewWithHandler{[weak self](pullToRefreshView)inself?.performSomeLongRunningOperation(input, handler:{(output, error)inDispatchQueue.main.async{
pullToRefreshView.endRefreshing()}})}
// To manually trigger the refresh animation.
self.tableView.pullToRefreshView()?.beginRefreshing()
Note
By default, each call to beginRefreshing() increments an internal counter, and calling endRefreshing() decrements that same counter. This prevents the animation from triggering multiple times if calling beginRefreshing() from more than one function in your code.
To force-hide the view, you can call endRefreshing(force: true), which will reset the counter and hide the view, regardless of any unbalanced calls to begin/end refreshing.
Advanced Use
Custom UI
A UIActivityIndicatorView is used, by default, to mimic UIRefreshControl. However, if you would like to customise your UI, you can add subviews to the public contentView.
// Add some custom UI to the content view.
self.tableView.pullToRefreshView()?.contentView.addSubview(self.myCustomView)
// Optionally, hide the default UIActivityIndicatorView.
self.tableView.pullToRefreshView()?.spinnerView.isHidden =true
Animations
You can set your own animation handlers, as follows:
self.tableView.pullToRefreshView()?.refreshDidStartAnimationHandler ={[weak self](pullToRefreshView)in
// Perform some custom animation.
}self.tableView.pullToRefreshView()?.refreshDidStopAnimationHandler ={[weak self](pullToRefreshView)in
// Stop your custom animation.
}
Here's an example custom animation that I use in the Galway Bus Abú app:
alt text
About
A simple Swift implementation of a pull-to-refresh control, for use with UITableView.
Resources
Readme
MIT license
Activity
Stars
1 star
Watchers
1 watching
Forks
1 fork
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Auto-enable theater mode on YouTube\n(function() {\n function tryTheater() {\n var btn = document.querySelector('button[aria-label=\"Theater mode\"], ytd-player #player button[title=\"Theater mode\"]');\n if (btn && !btn.classList.contains('activated')) {\n btn.click();\n }\n }\n \n // Try immediately\n tryTheater();\n \n // Try after navigation (SPA)\n var lastUrl = location.href;\n setInterval(function() {\n if (location.href !== lastUrl) {\n lastUrl = location.href;\n setTimeout(tryTheater, 500);\n }\n }, 1000);\n \n // Also try on player load\n var observer = new MutationObserver(tryTheater);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "YouTube Theater Mode Default");
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
PullToRefreshView
A simple Swift implementation of a pull-to-refresh control, for use with UITableView.
VersionLicensePlatform
Installation
Manual
Add the PullToRefreshView.swift file to your Xcode project, then follow the steps in the Basic Use section below. This file can be found in the PullToRefreshViewDotSwift/Classes directory.
CocoaPods
PullToRefreshView is available through CocoaPods. To install
it, simply add the following line to your Podfile:
pod"PullToRefreshViewDotSwift"
Basic Use
// Add the control to the table view, // and specify what should be done when it's triggered.
self.tableView.installPullToRefreshViewWithHandler{[weak self](pullToRefreshView)inself?.performSomeLongRunningOperation(input, handler:{(output, error)inDispatchQueue.main.async{
pullToRefreshView.endRefreshing()}})}
// To manually trigger the refresh animation.
self.tableView.pullToRefreshView()?.beginRefreshing()
Note
By default, each call to beginRefreshing() increments an internal counter, and calling endRefreshing() decrements that same counter. This prevents the animation from triggering multiple times if calling beginRefreshing() from more than one function in your code.
To force-hide the view, you can call endRefreshing(force: true), which will reset the counter and hide the view, regardless of any unbalanced calls to begin/end refreshing.
Advanced Use
Custom UI
A UIActivityIndicatorView is used, by default, to mimic UIRefreshControl. However, if you would like to customise your UI, you can add subviews to the public contentView.
// Add some custom UI to the content view.
self.tableView.pullToRefreshView()?.contentView.addSubview(self.myCustomView)
// Optionally, hide the default UIActivityIndicatorView.
self.tableView.pullToRefreshView()?.spinnerView.isHidden =true
Animations
You can set your own animation handlers, as follows:
self.tableView.pullToRefreshView()?.refreshDidStartAnimationHandler ={[weak self](pullToRefreshView)in
// Perform some custom animation.
}self.tableView.pullToRefreshView()?.refreshDidStopAnimationHandler ={[weak self](pullToRefreshView)in
// Stop your custom animation.
}
Here's an example custom animation that I use in the Galway Bus Abú app:
alt text
About
A simple Swift implementation of a pull-to-refresh control, for use with UITableView.
Resources
Readme
MIT license
Activity
Stars
1 star
Watchers
1 watching
Forks
1 fork
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Remove or un-stick sticky/fixed headers that block content\n(function() {\n function unstick() {\n document.querySelectorAll('header, nav, [role=\"banner\"], .header, .navbar, .sticky, .fixed-top, [style*=\"position: fixed\"], [style*=\"position:sticky\"]').forEach(function(el) {\n if (el.style.position === 'fixed' || el.style.position === 'sticky' || \n getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {\n el.style.position = 'static';\n el.style.top = 'auto';\n el.style.zIndex = 'auto';\n }\n });\n }\n \n unstick();\n \n var observer = new MutationObserver(unstick);\n observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });\n})();", "Kill Sticky Headers");
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
PullToRefreshView
A simple Swift implementation of a pull-to-refresh control, for use with UITableView.
VersionLicensePlatform
Installation
Manual
Add the PullToRefreshView.swift file to your Xcode project, then follow the steps in the Basic Use section below. This file can be found in the PullToRefreshViewDotSwift/Classes directory.
CocoaPods
PullToRefreshView is available through CocoaPods. To install
it, simply add the following line to your Podfile:
pod"PullToRefreshViewDotSwift"
Basic Use
// Add the control to the table view, // and specify what should be done when it's triggered.
self.tableView.installPullToRefreshViewWithHandler{[weak self](pullToRefreshView)inself?.performSomeLongRunningOperation(input, handler:{(output, error)inDispatchQueue.main.async{
pullToRefreshView.endRefreshing()}})}
// To manually trigger the refresh animation.
self.tableView.pullToRefreshView()?.beginRefreshing()
Note
By default, each call to beginRefreshing() increments an internal counter, and calling endRefreshing() decrements that same counter. This prevents the animation from triggering multiple times if calling beginRefreshing() from more than one function in your code.
To force-hide the view, you can call endRefreshing(force: true), which will reset the counter and hide the view, regardless of any unbalanced calls to begin/end refreshing.
Advanced Use
Custom UI
A UIActivityIndicatorView is used, by default, to mimic UIRefreshControl. However, if you would like to customise your UI, you can add subviews to the public contentView.
// Add some custom UI to the content view.
self.tableView.pullToRefreshView()?.contentView.addSubview(self.myCustomView)
// Optionally, hide the default UIActivityIndicatorView.
self.tableView.pullToRefreshView()?.spinnerView.isHidden =true
Animations
You can set your own animation handlers, as follows:
self.tableView.pullToRefreshView()?.refreshDidStartAnimationHandler ={[weak self](pullToRefreshView)in
// Perform some custom animation.
}self.tableView.pullToRefreshView()?.refreshDidStopAnimationHandler ={[weak self](pullToRefreshView)in
// Stop your custom animation.
}
Here's an example custom animation that I use in the Galway Bus Abú app:
alt text
About
A simple Swift implementation of a pull-to-refresh control, for use with UITableView.
Resources
Readme
MIT license
Activity
Stars
1 star
Watchers
1 watching
Forks
1 fork
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Universal Dark Mode - works on any site\n(function() {\n var enabled = true;\n \n function applyDarkMode() {\n if (!enabled) return;\n \n // Create style element if it doesn't exist\n var style = document.getElementById('universal-dark-mode-style');\n if (!style) {\n style = document.createElement('style');\n style.id = 'universal-dark-mode-style';\n document.head.appendChild(style);\n }\n \n // Dark mode CSS - inverts colors but preserves images/video\n style.textContent = '\n /* Invert everything except media */\n html {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #1a1a2e !important;\n }\n \n /* Restore images, videos, iframes, canvas */\n img, video, iframe, canvas, svg, picture, [style*=\"background-image\"] {\n filter: invert(1) hue-rotate(180deg) !important;\n }\n \n /* Preserve specific elements that should not be inverted */\n .no-dark-mode, .no-dark-mode *,\n [data-theme=\"light\"], [data-theme=\"light\"],\n .ace_editor, .ace_editor *,\n .CodeMirror, .CodeMirror *,\n .monaco-editor, .monaco-editor *,\n .markdown-body pre, .markdown-body pre *,\n .highlight, .highlight *,\n pre code, pre code * {\n filter: none !important;\n }\n \n /* Fix common UI elements */\n .modal, .popup, .dropdown-menu, .tooltip, .popover {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #2d2d44 !important;\n border-color: #444 !important;\n }\n \n /* Scrollbars */\n ::-webkit-scrollbar { background: #1a1a2e !important; }\n ::-webkit-scrollbar-thumb { background: #444 !important; }\n ::-webkit-scrollbar-thumb:hover { background: #555 !important; }\n \n /* Selection */\n ::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ';\n }\n \n function removeDarkMode() {\n var style = document.getElementById('universal-dark-mode-style');\n if (style) style.remove();\n }\n \n // Toggle with Alt+Shift+D\n document.addEventListener('keydown', function(e) {\n if (e.altKey && e.shiftKey && e.key === 'D') {\n e.preventDefault();\n enabled = !enabled;\n if (enabled) {\n applyDarkMode();\n console.log('[Universal Dark Mode] Enabled');\n } else {\n removeDarkMode();\n console.log('[Universal Dark Mode] Disabled');\n }\n }\n });\n \n // Apply on load\n applyDarkMode();\n \n // Re-apply on dynamic content\n var observer = new MutationObserver(function(mutations) {\n if (enabled && !document.getElementById('universal-dark-mode-style')) {\n applyDarkMode();\n }\n });\n observer.observe(document.head, { childList: true });\n \n console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');\n})();", "Universal Dark Mode");
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content
BranchesTags
Repository files navigation
PullToRefreshView
A simple Swift implementation of a pull-to-refresh control, for use with UITableView.
VersionLicensePlatform
Installation
Manual
Add the PullToRefreshView.swift file to your Xcode project, then follow the steps in the Basic Use section below. This file can be found in the PullToRefreshViewDotSwift/Classes directory.
CocoaPods
PullToRefreshView is available through CocoaPods. To install
it, simply add the following line to your Podfile:
pod"PullToRefreshViewDotSwift"
Basic Use
// Add the control to the table view, // and specify what should be done when it's triggered.
self.tableView.installPullToRefreshViewWithHandler{[weak self](pullToRefreshView)inself?.performSomeLongRunningOperation(input, handler:{(output, error)inDispatchQueue.main.async{
pullToRefreshView.endRefreshing()}})}
// To manually trigger the refresh animation.
self.tableView.pullToRefreshView()?.beginRefreshing()
Note
By default, each call to beginRefreshing() increments an internal counter, and calling endRefreshing() decrements that same counter. This prevents the animation from triggering multiple times if calling beginRefreshing() from more than one function in your code.
To force-hide the view, you can call endRefreshing(force: true), which will reset the counter and hide the view, regardless of any unbalanced calls to begin/end refreshing.
Advanced Use
Custom UI
A UIActivityIndicatorView is used, by default, to mimic UIRefreshControl. However, if you would like to customise your UI, you can add subviews to the public contentView.
// Add some custom UI to the content view.
self.tableView.pullToRefreshView()?.contentView.addSubview(self.myCustomView)
// Optionally, hide the default UIActivityIndicatorView.
self.tableView.pullToRefreshView()?.spinnerView.isHidden =true
Animations
You can set your own animation handlers, as follows:
self.tableView.pullToRefreshView()?.refreshDidStartAnimationHandler ={[weak self](pullToRefreshView)in
// Perform some custom animation.
}self.tableView.pullToRefreshView()?.refreshDidStopAnimationHandler ={[weak self](pullToRefreshView)in
// Stop your custom animation.
}
Here's an example custom animation that I use in the Galway Bus Abú app:
alt text
About
A simple Swift implementation of a pull-to-refresh control, for use with UITableView.
Resources
Readme
MIT license
Activity
Stars
1 star
Watchers
1 watching
Forks
1 fork
Report repository
Releases
Packages
Contributors
Languages