This repository was archived by the owner on Sep 13, 2022. It is now read-only.
BranchesTags

Repository files navigation

Moved to https://github.com/lnbits/fossa

image

OFFLINE, FOSS, CHEAP, BILLS/COINS, EASY CONFIG WEB PORTAL

Join our telegram support/chat.

Demo

https://twitter.com/arcbtc/status/1567639231333277697

Video tutorial

https://www.youtube.com/watch?v=vbyYb9Yiu_k

Parts (PROJECT COST UNDER £200!)

Can run with a coin mech and bill acceptor, or either on their own.

  • ESP32 WT32-SC01 £20
  • DG600F(S) Multi Coin Acceptor £30
  • NV10USB+ bill acceptor (Seems to be plenty 2nd hand ones on ebay) £70
  • Box ("aluminum medicine box" on amazon £30), ("Amazon Basic Home Safe", for more secure solution £70)
  • Screw Terminal block £1
  • 12v power supply, best to get one with terminal block adapter (12v battery also works well, for unplugged version) £8
  • 12v to 5v step down converter with USB £5
  • Male/female GPIO jumpers £5

image

Construction

WT32-SC01 Pinmap

Coin acceptor wiring

169517488-65bfba37-0c9c-4dc4-9533-c6c4517cc1ff

You can usually order the coin acceptor pre-programmed to your currencies, otherwise you will need to train the acceptor using this guide.

Bill acceptor wiring

169518370-2bdf7acd-e5f9-4d34-bd34-26854b805704

The bill acceptor needs to be programmed to your currency and set to SIO mode, usually you can buy them preconfigured. If you have to program, buy this wire and download the Validator Manager software here or here (sadly only runs on windows, so use a friends machine). Details on programming can be found here. Its relatively straight forward to program, plug in USB host cable, turn on holding config button for 2 secs, open the Validator Manager software.

(Ignore all the hardware requirements for programming in the guide, you just need the host cable! Don't try using the programming cards in the guide, thats an old system these machines no longer support "Many Bothans died to bring us this information,")

Mounting in box

Use the templates provided here. print out standard UK A4. Its useful if the pins on the bill acceptor and coin mech are accessible.

  • For the Aluminim Storage Box solution, holes can be cut with a sharp knife (clearly not secure, but fine for somewhere you can keep an eye on the ATM or for demoes).

  • For the Home Safe solution, holes can be cut with angle grinder and a very thin cutter. (If you have not used an angle grinder before, don't be scared, they're cheap, easy enought to use, and very useful. Just take your time and wear safetly equipment.)

We use CT1 sealent/adhesive (or similar) for mounting screen, although the screen has screw points, which should prob be used for added security.

Installing arduino + libraries

Install the Arduino IDE,
https://www.arduino.cc/en/Main/Software

Install the ESP32 hardware,
https://github.com/espressif/arduino-esp32#installation-instructions

Copy the libraries from this projects libraries folder, to your "/Arduino/libraries" folder (usually in OS "Home" directory)

BITCOIN

About

A Lightning Network ATM, for loose fiat change

Resources

Readme
GPL-3.0 license
Activity

Stars

54 stars

Watchers

1 watching

Forks

36 forks
Report repository

Releases

Packages

Used by

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { injectUserscript("// Add copy buttons to all 
 blocks\n(function() {\n function addCopyButtons() {\n document.querySelectorAll('pre code').forEach(function(codeBlock) {\n if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;\n codeBlock.parentElement.setAttribute('data-copy-added', 'true');\n \n var btn = document.createElement('button');\n btn.textContent = 'Copy';\n btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';\n btn.onmouseover = function() { this.style.opacity = '1'; };\n btn.onmouseout = function() { this.style.opacity = '0.7'; };\n btn.onclick = function() {\n navigator.clipboard.writeText(codeBlock.textContent).then(function() {\n btn.textContent = 'Copied!';\n setTimeout(function() { btn.textContent = 'Copy'; }, 1500);\n });\n };\n codeBlock.parentElement.style.position = 'relative';\n codeBlock.parentElement.appendChild(btn);\n });\n }\n \n addCopyButtons();\n \n // Re-run on dynamic content\n var observer = new MutationObserver(addCopyButtons);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Add Copy Buttons to Code Blocks");
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content

This repository was archived by the owner on Sep 13, 2022. It is now read-only.

BranchesTags
Repository files navigation
Moved to https://github.com/lnbits/fossa
image
OFFLINE, FOSS, CHEAP, BILLS/COINS, EASY CONFIG WEB PORTAL
Join our telegram support/chat.
Demo
https://twitter.com/arcbtc/status/1567639231333277697
Video tutorial
https://www.youtube.com/watch?v=vbyYb9Yiu_k
Parts (PROJECT COST UNDER £200!)
Can run with a coin mech and bill acceptor, or either on their own.
  • ESP32 WT32-SC01 £20
  • DG600F(S) Multi Coin Acceptor £30
  • NV10USB+ bill acceptor (Seems to be plenty 2nd hand ones on ebay) £70
  • Box ("aluminum medicine box" on amazon £30), ("Amazon Basic Home Safe", for more secure solution £70)
  • Screw Terminal block £1
  • 12v power supply, best to get one with terminal block adapter (12v battery also works well, for unplugged version) £8
  • 12v to 5v step down converter with USB £5
  • Male/female GPIO jumpers £5
image
Construction
WT32-SC01 Pinmap
Coin acceptor wiring
169517488-65bfba37-0c9c-4dc4-9533-c6c4517cc1ff
You can usually order the coin acceptor pre-programmed to your currencies, otherwise you will need to train the acceptor using this guide.
Bill acceptor wiring
169518370-2bdf7acd-e5f9-4d34-bd34-26854b805704
The bill acceptor needs to be programmed to your currency and set to SIO mode, usually you can buy them preconfigured. If you have to program, buy this wire and download the Validator Manager software here or here (sadly only runs on windows, so use a friends machine). Details on programming can be found here. Its relatively straight forward to program, plug in USB host cable, turn on holding config button for 2 secs, open the Validator Manager software.
(Ignore all the hardware requirements for programming in the guide, you just need the host cable! Don't try using the programming cards in the guide, thats an old system these machines no longer support "Many Bothans died to bring us this information,")
Mounting in box
Use the templates provided here. print out standard UK A4. Its useful if the pins on the bill acceptor and coin mech are accessible.
  • For the Aluminim Storage Box solution, holes can be cut with a sharp knife (clearly not secure, but fine for somewhere you can keep an eye on the ATM or for demoes).
  • For the Home Safe solution, holes can be cut with angle grinder and a very thin cutter. (If you have not used an angle grinder before, don't be scared, they're cheap, easy enought to use, and very useful. Just take your time and wear safetly equipment.)
We use CT1 sealent/adhesive (or similar) for mounting screen, although the screen has screw points, which should prob be used for added security.
Installing arduino + libraries
Install the Arduino IDE,
https://www.arduino.cc/en/Main/Software
Install the ESP32 hardware,
https://github.com/espressif/arduino-esp32#installation-instructions
Copy the libraries from this projects libraries folder, to your "/Arduino/libraries" folder (usually in OS "Home" directory)
BITCOIN
About
A Lightning Network ATM, for loose fiat change 
Resources
Readme
GPL-3.0 license
Activity
Stars
54 stars
Watchers
1 watching
Forks
36 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Force GitHub README to respect dark mode\n(function() {\n var style = document.createElement('style');\n style.textContent = '\n .markdown-body {\n color-scheme: dark light;\n }\n .markdown-body pre { background: #161b22 !important; }\n .markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }\n .markdown-body table th, .markdown-body table td { border-color: #30363d !important; }\n .markdown-body img { background: #0d1117; }\n .markdown-body blockquote { border-left-color: #8b949e; }\n .markdown-body hr { border-color: #30363d; }\n ';\n document.head.appendChild(style);\n})();", "GitHub Dark Mode README Fix");
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content

This repository was archived by the owner on Sep 13, 2022. It is now read-only.

BranchesTags
Repository files navigation
Moved to https://github.com/lnbits/fossa
image
OFFLINE, FOSS, CHEAP, BILLS/COINS, EASY CONFIG WEB PORTAL
Join our telegram support/chat.
Demo
https://twitter.com/arcbtc/status/1567639231333277697
Video tutorial
https://www.youtube.com/watch?v=vbyYb9Yiu_k
Parts (PROJECT COST UNDER £200!)
Can run with a coin mech and bill acceptor, or either on their own.
  • ESP32 WT32-SC01 £20
  • DG600F(S) Multi Coin Acceptor £30
  • NV10USB+ bill acceptor (Seems to be plenty 2nd hand ones on ebay) £70
  • Box ("aluminum medicine box" on amazon £30), ("Amazon Basic Home Safe", for more secure solution £70)
  • Screw Terminal block £1
  • 12v power supply, best to get one with terminal block adapter (12v battery also works well, for unplugged version) £8
  • 12v to 5v step down converter with USB £5
  • Male/female GPIO jumpers £5
image
Construction
WT32-SC01 Pinmap
Coin acceptor wiring
169517488-65bfba37-0c9c-4dc4-9533-c6c4517cc1ff
You can usually order the coin acceptor pre-programmed to your currencies, otherwise you will need to train the acceptor using this guide.
Bill acceptor wiring
169518370-2bdf7acd-e5f9-4d34-bd34-26854b805704
The bill acceptor needs to be programmed to your currency and set to SIO mode, usually you can buy them preconfigured. If you have to program, buy this wire and download the Validator Manager software here or here (sadly only runs on windows, so use a friends machine). Details on programming can be found here. Its relatively straight forward to program, plug in USB host cable, turn on holding config button for 2 secs, open the Validator Manager software.
(Ignore all the hardware requirements for programming in the guide, you just need the host cable! Don't try using the programming cards in the guide, thats an old system these machines no longer support "Many Bothans died to bring us this information,")
Mounting in box
Use the templates provided here. print out standard UK A4. Its useful if the pins on the bill acceptor and coin mech are accessible.
  • For the Aluminim Storage Box solution, holes can be cut with a sharp knife (clearly not secure, but fine for somewhere you can keep an eye on the ATM or for demoes).
  • For the Home Safe solution, holes can be cut with angle grinder and a very thin cutter. (If you have not used an angle grinder before, don't be scared, they're cheap, easy enought to use, and very useful. Just take your time and wear safetly equipment.)
We use CT1 sealent/adhesive (or similar) for mounting screen, although the screen has screw points, which should prob be used for added security.
Installing arduino + libraries
Install the Arduino IDE,
https://www.arduino.cc/en/Main/Software
Install the ESP32 hardware,
https://github.com/espressif/arduino-esp32#installation-instructions
Copy the libraries from this projects libraries folder, to your "/Arduino/libraries" folder (usually in OS "Home" directory)
BITCOIN
About
A Lightning Network ATM, for loose fiat change 
Resources
Readme
GPL-3.0 license
Activity
Stars
54 stars
Watchers
1 watching
Forks
36 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Highlight search terms from Google/DuckDuckGo/Bing referrer\n(function() {\n var ref = document.referrer;\n var terms = [];\n \n if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {\n var url = new URL(ref);\n var q = url.searchParams.get('q') || url.searchParams.get('p');\n if (q) {\n terms = q.split(/\\s+/).filter(function(t) { return t.length > 2; });\n }\n }\n \n if (terms.length === 0) return;\n \n var style = document.createElement('style');\n style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';\n document.head.appendChild(style);\n \n function highlight(node) {\n if (node.nodeType === 3) { // text node\n var text = node.textContent;\n var found = false;\n terms.forEach(function(term) {\n var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\\]\\\\]/g, '\\\\') + ')', 'gi');\n if (regex.test(text)) {\n found = true;\n var frag = document.createDocumentFragment();\n var parts = text.split(regex);\n parts.forEach(function(part, i) {\n if (i % 2 === 0) {\n frag.appendChild(document.createTextNode(part));\n } else {\n var span = document.createElement('span');\n span.className = 'userscript-highlight';\n span.textContent = part;\n frag.appendChild(span);\n }\n });\n node.parentNode.replaceChild(frag, node);\n }\n });\n } else if (node.nodeType === 1 && node.childNodes) { // element\n var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];\n if (!skipTags.includes(node.tagName)) {\n Array.from(node.childNodes).forEach(highlight);\n }\n }\n }\n \n highlight(document.body);\n \n // Re-highlight on dynamic content\n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1 || node.nodeType === 3) highlight(node);\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Highlight Search Terms");
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content

This repository was archived by the owner on Sep 13, 2022. It is now read-only.

BranchesTags
Repository files navigation
Moved to https://github.com/lnbits/fossa
image
OFFLINE, FOSS, CHEAP, BILLS/COINS, EASY CONFIG WEB PORTAL
Join our telegram support/chat.
Demo
https://twitter.com/arcbtc/status/1567639231333277697
Video tutorial
https://www.youtube.com/watch?v=vbyYb9Yiu_k
Parts (PROJECT COST UNDER £200!)
Can run with a coin mech and bill acceptor, or either on their own.
  • ESP32 WT32-SC01 £20
  • DG600F(S) Multi Coin Acceptor £30
  • NV10USB+ bill acceptor (Seems to be plenty 2nd hand ones on ebay) £70
  • Box ("aluminum medicine box" on amazon £30), ("Amazon Basic Home Safe", for more secure solution £70)
  • Screw Terminal block £1
  • 12v power supply, best to get one with terminal block adapter (12v battery also works well, for unplugged version) £8
  • 12v to 5v step down converter with USB £5
  • Male/female GPIO jumpers £5
image
Construction
WT32-SC01 Pinmap
Coin acceptor wiring
169517488-65bfba37-0c9c-4dc4-9533-c6c4517cc1ff
You can usually order the coin acceptor pre-programmed to your currencies, otherwise you will need to train the acceptor using this guide.
Bill acceptor wiring
169518370-2bdf7acd-e5f9-4d34-bd34-26854b805704
The bill acceptor needs to be programmed to your currency and set to SIO mode, usually you can buy them preconfigured. If you have to program, buy this wire and download the Validator Manager software here or here (sadly only runs on windows, so use a friends machine). Details on programming can be found here. Its relatively straight forward to program, plug in USB host cable, turn on holding config button for 2 secs, open the Validator Manager software.
(Ignore all the hardware requirements for programming in the guide, you just need the host cable! Don't try using the programming cards in the guide, thats an old system these machines no longer support "Many Bothans died to bring us this information,")
Mounting in box
Use the templates provided here. print out standard UK A4. Its useful if the pins on the bill acceptor and coin mech are accessible.
  • For the Aluminim Storage Box solution, holes can be cut with a sharp knife (clearly not secure, but fine for somewhere you can keep an eye on the ATM or for demoes).
  • For the Home Safe solution, holes can be cut with angle grinder and a very thin cutter. (If you have not used an angle grinder before, don't be scared, they're cheap, easy enought to use, and very useful. Just take your time and wear safetly equipment.)
We use CT1 sealent/adhesive (or similar) for mounting screen, although the screen has screw points, which should prob be used for added security.
Installing arduino + libraries
Install the Arduino IDE,
https://www.arduino.cc/en/Main/Software
Install the ESP32 hardware,
https://github.com/espressif/arduino-esp32#installation-instructions
Copy the libraries from this projects libraries folder, to your "/Arduino/libraries" folder (usually in OS "Home" directory)
BITCOIN
About
A Lightning Network ATM, for loose fiat change 
Resources
Readme
GPL-3.0 license
Activity
Stars
54 stars
Watchers
1 watching
Forks
36 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Strip utm_, fbclid, gclid, etc. from all links on page\n(function() {\n var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',\n 'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',\n 'ref', 'ref_src', 'source', 'medium', 'campaign'];\n \n function cleanUrl(url) {\n try {\n var u = new URL(url, window.location.origin);\n var changed = false;\n trackingParams.forEach(function(p) {\n if (u.searchParams.has(p)) {\n u.searchParams.delete(p);\n changed = true;\n }\n });\n return changed ? u.toString() : url;\n } catch (e) {\n return url;\n }\n }\n \n function cleanLinks() {\n document.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n \n cleanLinks();\n \n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1) {\n if (node.tagName === 'A') cleanLinks();\n node.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Remove Tracking Parameters from Links");
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content

This repository was archived by the owner on Sep 13, 2022. It is now read-only.

BranchesTags
Repository files navigation
Moved to https://github.com/lnbits/fossa
image
OFFLINE, FOSS, CHEAP, BILLS/COINS, EASY CONFIG WEB PORTAL
Join our telegram support/chat.
Demo
https://twitter.com/arcbtc/status/1567639231333277697
Video tutorial
https://www.youtube.com/watch?v=vbyYb9Yiu_k
Parts (PROJECT COST UNDER £200!)
Can run with a coin mech and bill acceptor, or either on their own.
  • ESP32 WT32-SC01 £20
  • DG600F(S) Multi Coin Acceptor £30
  • NV10USB+ bill acceptor (Seems to be plenty 2nd hand ones on ebay) £70
  • Box ("aluminum medicine box" on amazon £30), ("Amazon Basic Home Safe", for more secure solution £70)
  • Screw Terminal block £1
  • 12v power supply, best to get one with terminal block adapter (12v battery also works well, for unplugged version) £8
  • 12v to 5v step down converter with USB £5
  • Male/female GPIO jumpers £5
image
Construction
WT32-SC01 Pinmap
Coin acceptor wiring
169517488-65bfba37-0c9c-4dc4-9533-c6c4517cc1ff
You can usually order the coin acceptor pre-programmed to your currencies, otherwise you will need to train the acceptor using this guide.
Bill acceptor wiring
169518370-2bdf7acd-e5f9-4d34-bd34-26854b805704
The bill acceptor needs to be programmed to your currency and set to SIO mode, usually you can buy them preconfigured. If you have to program, buy this wire and download the Validator Manager software here or here (sadly only runs on windows, so use a friends machine). Details on programming can be found here. Its relatively straight forward to program, plug in USB host cable, turn on holding config button for 2 secs, open the Validator Manager software.
(Ignore all the hardware requirements for programming in the guide, you just need the host cable! Don't try using the programming cards in the guide, thats an old system these machines no longer support "Many Bothans died to bring us this information,")
Mounting in box
Use the templates provided here. print out standard UK A4. Its useful if the pins on the bill acceptor and coin mech are accessible.
  • For the Aluminim Storage Box solution, holes can be cut with a sharp knife (clearly not secure, but fine for somewhere you can keep an eye on the ATM or for demoes).
  • For the Home Safe solution, holes can be cut with angle grinder and a very thin cutter. (If you have not used an angle grinder before, don't be scared, they're cheap, easy enought to use, and very useful. Just take your time and wear safetly equipment.)
We use CT1 sealent/adhesive (or similar) for mounting screen, although the screen has screw points, which should prob be used for added security.
Installing arduino + libraries
Install the Arduino IDE,
https://www.arduino.cc/en/Main/Software
Install the ESP32 hardware,
https://github.com/espressif/arduino-esp32#installation-instructions
Copy the libraries from this projects libraries folder, to your "/Arduino/libraries" folder (usually in OS "Home" directory)
BITCOIN
About
A Lightning Network ATM, for loose fiat change 
Resources
Readme
GPL-3.0 license
Activity
Stars
54 stars
Watchers
1 watching
Forks
36 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Auto-enable theater mode on YouTube\n(function() {\n function tryTheater() {\n var btn = document.querySelector('button[aria-label=\"Theater mode\"], ytd-player #player button[title=\"Theater mode\"]');\n if (btn && !btn.classList.contains('activated')) {\n btn.click();\n }\n }\n \n // Try immediately\n tryTheater();\n \n // Try after navigation (SPA)\n var lastUrl = location.href;\n setInterval(function() {\n if (location.href !== lastUrl) {\n lastUrl = location.href;\n setTimeout(tryTheater, 500);\n }\n }, 1000);\n \n // Also try on player load\n var observer = new MutationObserver(tryTheater);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "YouTube Theater Mode Default");
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content

This repository was archived by the owner on Sep 13, 2022. It is now read-only.

BranchesTags
Repository files navigation
Moved to https://github.com/lnbits/fossa
image
OFFLINE, FOSS, CHEAP, BILLS/COINS, EASY CONFIG WEB PORTAL
Join our telegram support/chat.
Demo
https://twitter.com/arcbtc/status/1567639231333277697
Video tutorial
https://www.youtube.com/watch?v=vbyYb9Yiu_k
Parts (PROJECT COST UNDER £200!)
Can run with a coin mech and bill acceptor, or either on their own.
  • ESP32 WT32-SC01 £20
  • DG600F(S) Multi Coin Acceptor £30
  • NV10USB+ bill acceptor (Seems to be plenty 2nd hand ones on ebay) £70
  • Box ("aluminum medicine box" on amazon £30), ("Amazon Basic Home Safe", for more secure solution £70)
  • Screw Terminal block £1
  • 12v power supply, best to get one with terminal block adapter (12v battery also works well, for unplugged version) £8
  • 12v to 5v step down converter with USB £5
  • Male/female GPIO jumpers £5
image
Construction
WT32-SC01 Pinmap
Coin acceptor wiring
169517488-65bfba37-0c9c-4dc4-9533-c6c4517cc1ff
You can usually order the coin acceptor pre-programmed to your currencies, otherwise you will need to train the acceptor using this guide.
Bill acceptor wiring
169518370-2bdf7acd-e5f9-4d34-bd34-26854b805704
The bill acceptor needs to be programmed to your currency and set to SIO mode, usually you can buy them preconfigured. If you have to program, buy this wire and download the Validator Manager software here or here (sadly only runs on windows, so use a friends machine). Details on programming can be found here. Its relatively straight forward to program, plug in USB host cable, turn on holding config button for 2 secs, open the Validator Manager software.
(Ignore all the hardware requirements for programming in the guide, you just need the host cable! Don't try using the programming cards in the guide, thats an old system these machines no longer support "Many Bothans died to bring us this information,")
Mounting in box
Use the templates provided here. print out standard UK A4. Its useful if the pins on the bill acceptor and coin mech are accessible.
  • For the Aluminim Storage Box solution, holes can be cut with a sharp knife (clearly not secure, but fine for somewhere you can keep an eye on the ATM or for demoes).
  • For the Home Safe solution, holes can be cut with angle grinder and a very thin cutter. (If you have not used an angle grinder before, don't be scared, they're cheap, easy enought to use, and very useful. Just take your time and wear safetly equipment.)
We use CT1 sealent/adhesive (or similar) for mounting screen, although the screen has screw points, which should prob be used for added security.
Installing arduino + libraries
Install the Arduino IDE,
https://www.arduino.cc/en/Main/Software
Install the ESP32 hardware,
https://github.com/espressif/arduino-esp32#installation-instructions
Copy the libraries from this projects libraries folder, to your "/Arduino/libraries" folder (usually in OS "Home" directory)
BITCOIN
About
A Lightning Network ATM, for loose fiat change 
Resources
Readme
GPL-3.0 license
Activity
Stars
54 stars
Watchers
1 watching
Forks
36 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Remove or un-stick sticky/fixed headers that block content\n(function() {\n function unstick() {\n document.querySelectorAll('header, nav, [role=\"banner\"], .header, .navbar, .sticky, .fixed-top, [style*=\"position: fixed\"], [style*=\"position:sticky\"]').forEach(function(el) {\n if (el.style.position === 'fixed' || el.style.position === 'sticky' || \n getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {\n el.style.position = 'static';\n el.style.top = 'auto';\n el.style.zIndex = 'auto';\n }\n });\n }\n \n unstick();\n \n var observer = new MutationObserver(unstick);\n observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });\n})();", "Kill Sticky Headers");
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content

This repository was archived by the owner on Sep 13, 2022. It is now read-only.

BranchesTags
Repository files navigation
Moved to https://github.com/lnbits/fossa
image
OFFLINE, FOSS, CHEAP, BILLS/COINS, EASY CONFIG WEB PORTAL
Join our telegram support/chat.
Demo
https://twitter.com/arcbtc/status/1567639231333277697
Video tutorial
https://www.youtube.com/watch?v=vbyYb9Yiu_k
Parts (PROJECT COST UNDER £200!)
Can run with a coin mech and bill acceptor, or either on their own.
  • ESP32 WT32-SC01 £20
  • DG600F(S) Multi Coin Acceptor £30
  • NV10USB+ bill acceptor (Seems to be plenty 2nd hand ones on ebay) £70
  • Box ("aluminum medicine box" on amazon £30), ("Amazon Basic Home Safe", for more secure solution £70)
  • Screw Terminal block £1
  • 12v power supply, best to get one with terminal block adapter (12v battery also works well, for unplugged version) £8
  • 12v to 5v step down converter with USB £5
  • Male/female GPIO jumpers £5
image
Construction
WT32-SC01 Pinmap
Coin acceptor wiring
169517488-65bfba37-0c9c-4dc4-9533-c6c4517cc1ff
You can usually order the coin acceptor pre-programmed to your currencies, otherwise you will need to train the acceptor using this guide.
Bill acceptor wiring
169518370-2bdf7acd-e5f9-4d34-bd34-26854b805704
The bill acceptor needs to be programmed to your currency and set to SIO mode, usually you can buy them preconfigured. If you have to program, buy this wire and download the Validator Manager software here or here (sadly only runs on windows, so use a friends machine). Details on programming can be found here. Its relatively straight forward to program, plug in USB host cable, turn on holding config button for 2 secs, open the Validator Manager software.
(Ignore all the hardware requirements for programming in the guide, you just need the host cable! Don't try using the programming cards in the guide, thats an old system these machines no longer support "Many Bothans died to bring us this information,")
Mounting in box
Use the templates provided here. print out standard UK A4. Its useful if the pins on the bill acceptor and coin mech are accessible.
  • For the Aluminim Storage Box solution, holes can be cut with a sharp knife (clearly not secure, but fine for somewhere you can keep an eye on the ATM or for demoes).
  • For the Home Safe solution, holes can be cut with angle grinder and a very thin cutter. (If you have not used an angle grinder before, don't be scared, they're cheap, easy enought to use, and very useful. Just take your time and wear safetly equipment.)
We use CT1 sealent/adhesive (or similar) for mounting screen, although the screen has screw points, which should prob be used for added security.
Installing arduino + libraries
Install the Arduino IDE,
https://www.arduino.cc/en/Main/Software
Install the ESP32 hardware,
https://github.com/espressif/arduino-esp32#installation-instructions
Copy the libraries from this projects libraries folder, to your "/Arduino/libraries" folder (usually in OS "Home" directory)
BITCOIN
About
A Lightning Network ATM, for loose fiat change 
Resources
Readme
GPL-3.0 license
Activity
Stars
54 stars
Watchers
1 watching
Forks
36 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Universal Dark Mode - works on any site\n(function() {\n var enabled = true;\n \n function applyDarkMode() {\n if (!enabled) return;\n \n // Create style element if it doesn't exist\n var style = document.getElementById('universal-dark-mode-style');\n if (!style) {\n style = document.createElement('style');\n style.id = 'universal-dark-mode-style';\n document.head.appendChild(style);\n }\n \n // Dark mode CSS - inverts colors but preserves images/video\n style.textContent = '\n /* Invert everything except media */\n html {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #1a1a2e !important;\n }\n \n /* Restore images, videos, iframes, canvas */\n img, video, iframe, canvas, svg, picture, [style*=\"background-image\"] {\n filter: invert(1) hue-rotate(180deg) !important;\n }\n \n /* Preserve specific elements that should not be inverted */\n .no-dark-mode, .no-dark-mode *,\n [data-theme=\"light\"], [data-theme=\"light\"],\n .ace_editor, .ace_editor *,\n .CodeMirror, .CodeMirror *,\n .monaco-editor, .monaco-editor *,\n .markdown-body pre, .markdown-body pre *,\n .highlight, .highlight *,\n pre code, pre code * {\n filter: none !important;\n }\n \n /* Fix common UI elements */\n .modal, .popup, .dropdown-menu, .tooltip, .popover {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #2d2d44 !important;\n border-color: #444 !important;\n }\n \n /* Scrollbars */\n ::-webkit-scrollbar { background: #1a1a2e !important; }\n ::-webkit-scrollbar-thumb { background: #444 !important; }\n ::-webkit-scrollbar-thumb:hover { background: #555 !important; }\n \n /* Selection */\n ::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ';\n }\n \n function removeDarkMode() {\n var style = document.getElementById('universal-dark-mode-style');\n if (style) style.remove();\n }\n \n // Toggle with Alt+Shift+D\n document.addEventListener('keydown', function(e) {\n if (e.altKey && e.shiftKey && e.key === 'D') {\n e.preventDefault();\n enabled = !enabled;\n if (enabled) {\n applyDarkMode();\n console.log('[Universal Dark Mode] Enabled');\n } else {\n removeDarkMode();\n console.log('[Universal Dark Mode] Disabled');\n }\n }\n });\n \n // Apply on load\n applyDarkMode();\n \n // Re-apply on dynamic content\n var observer = new MutationObserver(function(mutations) {\n if (enabled && !document.getElementById('universal-dark-mode-style')) {\n applyDarkMode();\n }\n });\n observer.observe(document.head, { childList: true });\n \n console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');\n})();", "Universal Dark Mode");
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content

This repository was archived by the owner on Sep 13, 2022. It is now read-only.

BranchesTags
Repository files navigation
Moved to https://github.com/lnbits/fossa
image
OFFLINE, FOSS, CHEAP, BILLS/COINS, EASY CONFIG WEB PORTAL
Join our telegram support/chat.
Demo
https://twitter.com/arcbtc/status/1567639231333277697
Video tutorial
https://www.youtube.com/watch?v=vbyYb9Yiu_k
Parts (PROJECT COST UNDER £200!)
Can run with a coin mech and bill acceptor, or either on their own.
  • ESP32 WT32-SC01 £20
  • DG600F(S) Multi Coin Acceptor £30
  • NV10USB+ bill acceptor (Seems to be plenty 2nd hand ones on ebay) £70
  • Box ("aluminum medicine box" on amazon £30), ("Amazon Basic Home Safe", for more secure solution £70)
  • Screw Terminal block £1
  • 12v power supply, best to get one with terminal block adapter (12v battery also works well, for unplugged version) £8
  • 12v to 5v step down converter with USB £5
  • Male/female GPIO jumpers £5
image
Construction
WT32-SC01 Pinmap
Coin acceptor wiring
169517488-65bfba37-0c9c-4dc4-9533-c6c4517cc1ff
You can usually order the coin acceptor pre-programmed to your currencies, otherwise you will need to train the acceptor using this guide.
Bill acceptor wiring
169518370-2bdf7acd-e5f9-4d34-bd34-26854b805704
The bill acceptor needs to be programmed to your currency and set to SIO mode, usually you can buy them preconfigured. If you have to program, buy this wire and download the Validator Manager software here or here (sadly only runs on windows, so use a friends machine). Details on programming can be found here. Its relatively straight forward to program, plug in USB host cable, turn on holding config button for 2 secs, open the Validator Manager software.
(Ignore all the hardware requirements for programming in the guide, you just need the host cable! Don't try using the programming cards in the guide, thats an old system these machines no longer support "Many Bothans died to bring us this information,")
Mounting in box
Use the templates provided here. print out standard UK A4. Its useful if the pins on the bill acceptor and coin mech are accessible.
  • For the Aluminim Storage Box solution, holes can be cut with a sharp knife (clearly not secure, but fine for somewhere you can keep an eye on the ATM or for demoes).
  • For the Home Safe solution, holes can be cut with angle grinder and a very thin cutter. (If you have not used an angle grinder before, don't be scared, they're cheap, easy enought to use, and very useful. Just take your time and wear safetly equipment.)
We use CT1 sealent/adhesive (or similar) for mounting screen, although the screen has screw points, which should prob be used for added security.
Installing arduino + libraries
Install the Arduino IDE,
https://www.arduino.cc/en/Main/Software
Install the ESP32 hardware,
https://github.com/espressif/arduino-esp32#installation-instructions
Copy the libraries from this projects libraries folder, to your "/Arduino/libraries" folder (usually in OS "Home" directory)
BITCOIN
About
A Lightning Network ATM, for loose fiat change 
Resources
Readme
GPL-3.0 license
Activity
Stars
54 stars
Watchers
1 watching
Forks
36 forks
Report repository
Releases
Packages
Used by
Contributors
Languages