BranchesTags

Repository files navigation

GoDocBuild StatusCoverage StatusGo Report Card

ndt-server

This repository contains a ndt5 and ndt7 server written in Go. This code may compile under many systems, including macOS and Windows, but is specifically designed and tested for running on Linux 4.17+.

Setup

Primary setup & running (Linux)

Prepare the runtime environment

install -d certs datadir

To run the server locally, generate local self signed certificates (key.pem and cert.pem) using bash and OpenSSL

./gen_local_test_certs.bash

build the docker container for ndt-server

docker build . -t ndt-server

enable BBR (with which ndt7 works much better)

sudo modprobe tcp_bbr

and run the ndt-server binary container

docker run --network=bridge \
--publish 443:4443 \
--publish 80:8080 \
--volume `pwd`/certs:/certs:ro \
--volume `pwd`/datadir:/datadir \
--read-only \
--user `id -u`:`id -g` \
--cap-drop=all \
ndt-server \
-cert /certs/cert.pem \
-key /certs/key.pem \
-datadir /datadir \
-ndt7_addr :4443 \
-ndt7_addr_cleartext :8080

Alternate setup & running (Windows & MacOS)

These instructions assume you have Docker for Windows/Mac installed.

Note: NDT5 does not work on Docker for Windows/Mac as it requires using the host's network, which is only supported on Linux

docker-compose run ndt-server ./gen_local_test_certs.bash
docker-compose up

After making changes you will have to run docker-compose up --build to rebuild the ntd-server binary.

Accessing the service

Once you have done that, you should have a ndt5 server running on ports 3001 (legacy binary flavour), 3002 (WebSocket flavour), and 3010 (secure WebSocket flavour); a ndt7 server running on port 443 (over TLS and using the ndt7 WebSocket protocol); and Prometheus metrics available on port 9990.

Try accessing these URLs in your browser (for URLs using HTTPS, certs will appear invalid to your browser, but everything is safe because this is a test deployment, hence you should ignore this warning and continue):

Replace localhost with the IP of the server to access them externally.

About

docker native ndt5 and ndt7 server with prometheus integration

www.measurementlab.net/

Resources

Readme
Apache-2.0 license
Activity

Stars

0 stars

Watchers

0 watching

Forks

0 forks
Report repository

Releases

Packages

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { // Add copy buttons to all 
 blocks
(function() {
function addCopyButtons() {
document.querySelectorAll('pre code').forEach(function(codeBlock) {
if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;
codeBlock.parentElement.setAttribute('data-copy-added', 'true');
var btn = document.createElement('button');
btn.textContent = 'Copy';
btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';
btn.onmouseover = function() { this.style.opacity = '1'; };
btn.onmouseout = function() { this.style.opacity = '0.7'; };
btn.onclick = function() {
navigator.clipboard.writeText(codeBlock.textContent).then(function() {
btn.textContent = 'Copied!';
setTimeout(function() { btn.textContent = 'Copy'; }, 1500);
});
};
codeBlock.parentElement.style.position = 'relative';
codeBlock.parentElement.appendChild(btn);
});
}
addCopyButtons();
// Re-run on dynamic content
var observer = new MutationObserver(addCopyButtons);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content
BranchesTags
Repository files navigation
GoDocBuild StatusCoverage StatusGo Report Card
ndt-server
This repository contains a ndt5 and ndt7 server written in Go. This code may compile under
many systems, including macOS and Windows, but is specifically designed
and tested for running on Linux 4.17+.
Setup
Primary setup & running (Linux)
Prepare the runtime environment
install -d certs datadir
To run the server locally, generate local self signed certificates (key.pem
and cert.pem) using bash and OpenSSL
./gen_local_test_certs.bash
build the docker container for ndt-server
docker build . -t ndt-server
enable BBR (with which ndt7 works much better)
sudo modprobe tcp_bbr

and run the ndt-server binary container
docker run --network=bridge \
--publish 443:4443 \
--publish 80:8080 \
--volume `pwd`/certs:/certs:ro \
--volume `pwd`/datadir:/datadir \
--read-only \
--user `id -u`:`id -g` \
--cap-drop=all \
ndt-server \
-cert /certs/cert.pem \
-key /certs/key.pem \
-datadir /datadir \
-ndt7_addr :4443 \
-ndt7_addr_cleartext :8080
Alternate setup & running (Windows & MacOS)
These instructions assume you have Docker for Windows/Mac installed.
Note: NDT5 does not work on Docker for Windows/Mac as it requires using the host's network, which is only supported on Linux
docker-compose run ndt-server ./gen_local_test_certs.bash
docker-compose up

After making changes you will have to run docker-compose up --build to rebuild the ntd-server binary.
Accessing the service
Once you have done that, you should have a ndt5 server running on ports
3001 (legacy binary flavour), 3002 (WebSocket flavour), and 3010
(secure WebSocket flavour); a ndt7 server running on port 443 (over TLS
and using the ndt7 WebSocket protocol); and Prometheus metrics available
on port 9990.
Try accessing these URLs in your browser (for URLs using HTTPS, certs will
appear invalid to your browser, but everything is safe because this is a test
deployment, hence you should ignore this warning and continue):
Replace localhost with the IP of the server to access them externally.
About
docker native ndt5 and ndt7 server with prometheus integration
www.measurementlab.net/
Resources
Readme
Apache-2.0 license
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Force GitHub README to respect dark mode
(function() {
var style = document.createElement('style');
style.textContent = '
.markdown-body {
color-scheme: dark light;
}
.markdown-body pre { background: #161b22 !important; }
.markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }
.markdown-body table th, .markdown-body table td { border-color: #30363d !important; }
.markdown-body img { background: #0d1117; }
.markdown-body blockquote { border-left-color: #8b949e; }
.markdown-body hr { border-color: #30363d; }
';
document.head.appendChild(style);
})();
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
GoDocBuild StatusCoverage StatusGo Report Card
ndt-server
This repository contains a ndt5 and ndt7 server written in Go. This code may compile under
many systems, including macOS and Windows, but is specifically designed
and tested for running on Linux 4.17+.
Setup
Primary setup & running (Linux)
Prepare the runtime environment
install -d certs datadir
To run the server locally, generate local self signed certificates (key.pem
and cert.pem) using bash and OpenSSL
./gen_local_test_certs.bash
build the docker container for ndt-server
docker build . -t ndt-server
enable BBR (with which ndt7 works much better)
sudo modprobe tcp_bbr

and run the ndt-server binary container
docker run --network=bridge \
--publish 443:4443 \
--publish 80:8080 \
--volume `pwd`/certs:/certs:ro \
--volume `pwd`/datadir:/datadir \
--read-only \
--user `id -u`:`id -g` \
--cap-drop=all \
ndt-server \
-cert /certs/cert.pem \
-key /certs/key.pem \
-datadir /datadir \
-ndt7_addr :4443 \
-ndt7_addr_cleartext :8080
Alternate setup & running (Windows & MacOS)
These instructions assume you have Docker for Windows/Mac installed.
Note: NDT5 does not work on Docker for Windows/Mac as it requires using the host's network, which is only supported on Linux
docker-compose run ndt-server ./gen_local_test_certs.bash
docker-compose up

After making changes you will have to run docker-compose up --build to rebuild the ntd-server binary.
Accessing the service
Once you have done that, you should have a ndt5 server running on ports
3001 (legacy binary flavour), 3002 (WebSocket flavour), and 3010
(secure WebSocket flavour); a ndt7 server running on port 443 (over TLS
and using the ndt7 WebSocket protocol); and Prometheus metrics available
on port 9990.
Try accessing these URLs in your browser (for URLs using HTTPS, certs will
appear invalid to your browser, but everything is safe because this is a test
deployment, hence you should ignore this warning and continue):
Replace localhost with the IP of the server to access them externally.
About
docker native ndt5 and ndt7 server with prometheus integration
www.measurementlab.net/
Resources
Readme
Apache-2.0 license
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Highlight search terms from Google/DuckDuckGo/Bing referrer
(function() {
var ref = document.referrer;
var terms = [];
if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {
var url = new URL(ref);
var q = url.searchParams.get('q') || url.searchParams.get('p');
if (q) {
terms = q.split(/\s+/).filter(function(t) { return t.length > 2; });
}
}
if (terms.length === 0) return;
var style = document.createElement('style');
style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';
document.head.appendChild(style);
function highlight(node) {
if (node.nodeType === 3) { // text node
var text = node.textContent;
var found = false;
terms.forEach(function(term) {
var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\]\\]/g, '\\') + ')', 'gi');
if (regex.test(text)) {
found = true;
var frag = document.createDocumentFragment();
var parts = text.split(regex);
parts.forEach(function(part, i) {
if (i % 2 === 0) {
frag.appendChild(document.createTextNode(part));
} else {
var span = document.createElement('span');
span.className = 'userscript-highlight';
span.textContent = part;
frag.appendChild(span);
}
});
node.parentNode.replaceChild(frag, node);
}
});
} else if (node.nodeType === 1 && node.childNodes) { // element
var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];
if (!skipTags.includes(node.tagName)) {
Array.from(node.childNodes).forEach(highlight);
}
}
}
highlight(document.body);
// Re-highlight on dynamic content
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1 || node.nodeType === 3) highlight(node);
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
GoDocBuild StatusCoverage StatusGo Report Card
ndt-server
This repository contains a ndt5 and ndt7 server written in Go. This code may compile under
many systems, including macOS and Windows, but is specifically designed
and tested for running on Linux 4.17+.
Setup
Primary setup & running (Linux)
Prepare the runtime environment
install -d certs datadir
To run the server locally, generate local self signed certificates (key.pem
and cert.pem) using bash and OpenSSL
./gen_local_test_certs.bash
build the docker container for ndt-server
docker build . -t ndt-server
enable BBR (with which ndt7 works much better)
sudo modprobe tcp_bbr

and run the ndt-server binary container
docker run --network=bridge \
--publish 443:4443 \
--publish 80:8080 \
--volume `pwd`/certs:/certs:ro \
--volume `pwd`/datadir:/datadir \
--read-only \
--user `id -u`:`id -g` \
--cap-drop=all \
ndt-server \
-cert /certs/cert.pem \
-key /certs/key.pem \
-datadir /datadir \
-ndt7_addr :4443 \
-ndt7_addr_cleartext :8080
Alternate setup & running (Windows & MacOS)
These instructions assume you have Docker for Windows/Mac installed.
Note: NDT5 does not work on Docker for Windows/Mac as it requires using the host's network, which is only supported on Linux
docker-compose run ndt-server ./gen_local_test_certs.bash
docker-compose up

After making changes you will have to run docker-compose up --build to rebuild the ntd-server binary.
Accessing the service
Once you have done that, you should have a ndt5 server running on ports
3001 (legacy binary flavour), 3002 (WebSocket flavour), and 3010
(secure WebSocket flavour); a ndt7 server running on port 443 (over TLS
and using the ndt7 WebSocket protocol); and Prometheus metrics available
on port 9990.
Try accessing these URLs in your browser (for URLs using HTTPS, certs will
appear invalid to your browser, but everything is safe because this is a test
deployment, hence you should ignore this warning and continue):
Replace localhost with the IP of the server to access them externally.
About
docker native ndt5 and ndt7 server with prometheus integration
www.measurementlab.net/
Resources
Readme
Apache-2.0 license
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Strip utm_, fbclid, gclid, etc. from all links on page
(function() {
var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',
'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',
'ref', 'ref_src', 'source', 'medium', 'campaign'];
function cleanUrl(url) {
try {
var u = new URL(url, window.location.origin);
var changed = false;
trackingParams.forEach(function(p) {
if (u.searchParams.has(p)) {
u.searchParams.delete(p);
changed = true;
}
});
return changed ? u.toString() : url;
} catch (e) {
return url;
}
}
function cleanLinks() {
document.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
cleanLinks();
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1) {
if (node.tagName === 'A') cleanLinks();
node.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content
BranchesTags
Repository files navigation
GoDocBuild StatusCoverage StatusGo Report Card
ndt-server
This repository contains a ndt5 and ndt7 server written in Go. This code may compile under
many systems, including macOS and Windows, but is specifically designed
and tested for running on Linux 4.17+.
Setup
Primary setup & running (Linux)
Prepare the runtime environment
install -d certs datadir
To run the server locally, generate local self signed certificates (key.pem
and cert.pem) using bash and OpenSSL
./gen_local_test_certs.bash
build the docker container for ndt-server
docker build . -t ndt-server
enable BBR (with which ndt7 works much better)
sudo modprobe tcp_bbr

and run the ndt-server binary container
docker run --network=bridge \
--publish 443:4443 \
--publish 80:8080 \
--volume `pwd`/certs:/certs:ro \
--volume `pwd`/datadir:/datadir \
--read-only \
--user `id -u`:`id -g` \
--cap-drop=all \
ndt-server \
-cert /certs/cert.pem \
-key /certs/key.pem \
-datadir /datadir \
-ndt7_addr :4443 \
-ndt7_addr_cleartext :8080
Alternate setup & running (Windows & MacOS)
These instructions assume you have Docker for Windows/Mac installed.
Note: NDT5 does not work on Docker for Windows/Mac as it requires using the host's network, which is only supported on Linux
docker-compose run ndt-server ./gen_local_test_certs.bash
docker-compose up

After making changes you will have to run docker-compose up --build to rebuild the ntd-server binary.
Accessing the service
Once you have done that, you should have a ndt5 server running on ports
3001 (legacy binary flavour), 3002 (WebSocket flavour), and 3010
(secure WebSocket flavour); a ndt7 server running on port 443 (over TLS
and using the ndt7 WebSocket protocol); and Prometheus metrics available
on port 9990.
Try accessing these URLs in your browser (for URLs using HTTPS, certs will
appear invalid to your browser, but everything is safe because this is a test
deployment, hence you should ignore this warning and continue):
Replace localhost with the IP of the server to access them externally.
About
docker native ndt5 and ndt7 server with prometheus integration
www.measurementlab.net/
Resources
Readme
Apache-2.0 license
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Auto-enable theater mode on YouTube
(function() {
function tryTheater() {
var btn = document.querySelector('button[aria-label="Theater mode"], ytd-player #player button[title="Theater mode"]');
if (btn && !btn.classList.contains('activated')) {
btn.click();
}
}
// Try immediately
tryTheater();
// Try after navigation (SPA)
var lastUrl = location.href;
setInterval(function() {
if (location.href !== lastUrl) {
lastUrl = location.href;
setTimeout(tryTheater, 500);
}
}, 1000);
// Also try on player load
var observer = new MutationObserver(tryTheater);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
GoDocBuild StatusCoverage StatusGo Report Card
ndt-server
This repository contains a ndt5 and ndt7 server written in Go. This code may compile under
many systems, including macOS and Windows, but is specifically designed
and tested for running on Linux 4.17+.
Setup
Primary setup & running (Linux)
Prepare the runtime environment
install -d certs datadir
To run the server locally, generate local self signed certificates (key.pem
and cert.pem) using bash and OpenSSL
./gen_local_test_certs.bash
build the docker container for ndt-server
docker build . -t ndt-server
enable BBR (with which ndt7 works much better)
sudo modprobe tcp_bbr

and run the ndt-server binary container
docker run --network=bridge \
--publish 443:4443 \
--publish 80:8080 \
--volume `pwd`/certs:/certs:ro \
--volume `pwd`/datadir:/datadir \
--read-only \
--user `id -u`:`id -g` \
--cap-drop=all \
ndt-server \
-cert /certs/cert.pem \
-key /certs/key.pem \
-datadir /datadir \
-ndt7_addr :4443 \
-ndt7_addr_cleartext :8080
Alternate setup & running (Windows & MacOS)
These instructions assume you have Docker for Windows/Mac installed.
Note: NDT5 does not work on Docker for Windows/Mac as it requires using the host's network, which is only supported on Linux
docker-compose run ndt-server ./gen_local_test_certs.bash
docker-compose up

After making changes you will have to run docker-compose up --build to rebuild the ntd-server binary.
Accessing the service
Once you have done that, you should have a ndt5 server running on ports
3001 (legacy binary flavour), 3002 (WebSocket flavour), and 3010
(secure WebSocket flavour); a ndt7 server running on port 443 (over TLS
and using the ndt7 WebSocket protocol); and Prometheus metrics available
on port 9990.
Try accessing these URLs in your browser (for URLs using HTTPS, certs will
appear invalid to your browser, but everything is safe because this is a test
deployment, hence you should ignore this warning and continue):
Replace localhost with the IP of the server to access them externally.
About
docker native ndt5 and ndt7 server with prometheus integration
www.measurementlab.net/
Resources
Readme
Apache-2.0 license
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Remove or un-stick sticky/fixed headers that block content
(function() {
function unstick() {
document.querySelectorAll('header, nav, [role="banner"], .header, .navbar, .sticky, .fixed-top, [style*="position: fixed"], [style*="position:sticky"]').forEach(function(el) {
if (el.style.position === 'fixed' || el.style.position === 'sticky' || getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {
el.style.position = 'static';
el.style.top = 'auto';
el.style.zIndex = 'auto';
}
});
}
unstick();
var observer = new MutationObserver(unstick);
observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });
})();
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
GoDocBuild StatusCoverage StatusGo Report Card
ndt-server
This repository contains a ndt5 and ndt7 server written in Go. This code may compile under
many systems, including macOS and Windows, but is specifically designed
and tested for running on Linux 4.17+.
Setup
Primary setup & running (Linux)
Prepare the runtime environment
install -d certs datadir
To run the server locally, generate local self signed certificates (key.pem
and cert.pem) using bash and OpenSSL
./gen_local_test_certs.bash
build the docker container for ndt-server
docker build . -t ndt-server
enable BBR (with which ndt7 works much better)
sudo modprobe tcp_bbr

and run the ndt-server binary container
docker run --network=bridge \
--publish 443:4443 \
--publish 80:8080 \
--volume `pwd`/certs:/certs:ro \
--volume `pwd`/datadir:/datadir \
--read-only \
--user `id -u`:`id -g` \
--cap-drop=all \
ndt-server \
-cert /certs/cert.pem \
-key /certs/key.pem \
-datadir /datadir \
-ndt7_addr :4443 \
-ndt7_addr_cleartext :8080
Alternate setup & running (Windows & MacOS)
These instructions assume you have Docker for Windows/Mac installed.
Note: NDT5 does not work on Docker for Windows/Mac as it requires using the host's network, which is only supported on Linux
docker-compose run ndt-server ./gen_local_test_certs.bash
docker-compose up

After making changes you will have to run docker-compose up --build to rebuild the ntd-server binary.
Accessing the service
Once you have done that, you should have a ndt5 server running on ports
3001 (legacy binary flavour), 3002 (WebSocket flavour), and 3010
(secure WebSocket flavour); a ndt7 server running on port 443 (over TLS
and using the ndt7 WebSocket protocol); and Prometheus metrics available
on port 9990.
Try accessing these URLs in your browser (for URLs using HTTPS, certs will
appear invalid to your browser, but everything is safe because this is a test
deployment, hence you should ignore this warning and continue):
Replace localhost with the IP of the server to access them externally.
About
docker native ndt5 and ndt7 server with prometheus integration
www.measurementlab.net/
Resources
Readme
Apache-2.0 license
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Universal Dark Mode - works on any site
(function() {
var enabled = true;
function applyDarkMode() {
if (!enabled) return;
// Create style element if it doesn't exist
var style = document.getElementById('universal-dark-mode-style');
if (!style) {
style = document.createElement('style');
style.id = 'universal-dark-mode-style';
document.head.appendChild(style);
}
// Dark mode CSS - inverts colors but preserves images/video
style.textContent = '
/* Invert everything except media */
html {
filter: invert(1) hue-rotate(180deg) !important;
background: #1a1a2e !important;
}
/* Restore images, videos, iframes, canvas */
img, video, iframe, canvas, svg, picture, [style*="background-image"] {
filter: invert(1) hue-rotate(180deg) !important;
}
/* Preserve specific elements that should not be inverted */
.no-dark-mode, .no-dark-mode *,
[data-theme="light"], [data-theme="light"],
.ace_editor, .ace_editor *,
.CodeMirror, .CodeMirror *,
.monaco-editor, .monaco-editor *,
.markdown-body pre, .markdown-body pre *,
.highlight, .highlight *,
pre code, pre code * {
filter: none !important;
}
/* Fix common UI elements */
.modal, .popup, .dropdown-menu, .tooltip, .popover {
filter: invert(1) hue-rotate(180deg) !important;
background: #2d2d44 !important;
border-color: #444 !important;
}
/* Scrollbars */
::-webkit-scrollbar { background: #1a1a2e !important; }
::-webkit-scrollbar-thumb { background: #444 !important; }
::-webkit-scrollbar-thumb:hover { background: #555 !important; }
/* Selection */
::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }
::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }
';
}
function removeDarkMode() {
var style = document.getElementById('universal-dark-mode-style');
if (style) style.remove();
}
// Toggle with Alt+Shift+D
document.addEventListener('keydown', function(e) {
if (e.altKey && e.shiftKey && e.key === 'D') {
e.preventDefault();
enabled = !enabled;
if (enabled) {
applyDarkMode();
console.log('[Universal Dark Mode] Enabled');
} else {
removeDarkMode();
console.log('[Universal Dark Mode] Disabled');
}
}
});
// Apply on load
applyDarkMode();
// Re-apply on dynamic content
var observer = new MutationObserver(function(mutations) {
if (enabled && !document.getElementById('universal-dark-mode-style')) {
applyDarkMode();
}
});
observer.observe(document.head, { childList: true });
console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');
})();
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content
BranchesTags
Repository files navigation
GoDocBuild StatusCoverage StatusGo Report Card
ndt-server
This repository contains a ndt5 and ndt7 server written in Go. This code may compile under
many systems, including macOS and Windows, but is specifically designed
and tested for running on Linux 4.17+.
Setup
Primary setup & running (Linux)
Prepare the runtime environment
install -d certs datadir
To run the server locally, generate local self signed certificates (key.pem
and cert.pem) using bash and OpenSSL
./gen_local_test_certs.bash
build the docker container for ndt-server
docker build . -t ndt-server
enable BBR (with which ndt7 works much better)
sudo modprobe tcp_bbr

and run the ndt-server binary container
docker run --network=bridge \
--publish 443:4443 \
--publish 80:8080 \
--volume `pwd`/certs:/certs:ro \
--volume `pwd`/datadir:/datadir \
--read-only \
--user `id -u`:`id -g` \
--cap-drop=all \
ndt-server \
-cert /certs/cert.pem \
-key /certs/key.pem \
-datadir /datadir \
-ndt7_addr :4443 \
-ndt7_addr_cleartext :8080
Alternate setup & running (Windows & MacOS)
These instructions assume you have Docker for Windows/Mac installed.
Note: NDT5 does not work on Docker for Windows/Mac as it requires using the host's network, which is only supported on Linux
docker-compose run ndt-server ./gen_local_test_certs.bash
docker-compose up

After making changes you will have to run docker-compose up --build to rebuild the ntd-server binary.
Accessing the service
Once you have done that, you should have a ndt5 server running on ports
3001 (legacy binary flavour), 3002 (WebSocket flavour), and 3010
(secure WebSocket flavour); a ndt7 server running on port 443 (over TLS
and using the ndt7 WebSocket protocol); and Prometheus metrics available
on port 9990.
Try accessing these URLs in your browser (for URLs using HTTPS, certs will
appear invalid to your browser, but everything is safe because this is a test
deployment, hence you should ignore this warning and continue):
Replace localhost with the IP of the server to access them externally.
About
docker native ndt5 and ndt7 server with prometheus integration
www.measurementlab.net/
Resources
Readme
Apache-2.0 license
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages