Conversation
bjotoforce-pushed
the
arc-test
branch
8 times, most recently
from
January 3, 2024 20:06
5f4168b to
fec406cCompare
…ssions After unloading a module, we must reset the linear mapping permissions, see the example below: Before unloading a module: 0xffffaf809d65d000-0xffffaf809d6dc000 0x000000011d65d000 508K PTE . .. .. D A G . . W R V 0xffffaf809d6dc000-0xffffaf809d6dd000 0x000000011d6dc000 4K PTE . .. .. D A G . . . R V 0xffffaf809d6dd000-0xffffaf809d6e1000 0x000000011d6dd000 16K PTE . .. .. D A G . . W R V 0xffffaf809d6e1000-0xffffaf809d6e7000 0x000000011d6e1000 24K PTE . .. .. D A G . X . R V After unloading a module: 0xffffaf809d65d000-0xffffaf809d6e1000 0x000000011d65d000 528K PTE . .. .. D A G . . W R V 0xffffaf809d6e1000-0xffffaf809d6e7000 0x000000011d6e1000 24K PTE . .. .. D A G . X W R V The last mapping is not reset and we end up with WX mappings in the linear mapping. So add VM_FLUSH_RESET_PERMS to our module_alloc() definition. Fixes: 0cff8bf ("riscv: avoid the PIC offset of static percpu data in module beyond 2G limits") Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
When resetting the linear mapping permissions, we must make sure that we clear the X bit so that do not end up with WX mappings (since we set PAGE_KERNEL). Fixes: 395a21f ("riscv: add ARCH_HAS_SET_DIRECT_MAP support") Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
bjoto pushed a commit
that referenced
this pull request
May 21, 2024
…/git/pablo/gtp Pablo neira Ayuso says: ==================== gtp pull request 24-05-07 This v3 includes: - fix for clang uninitialized variable per Jakub. - address Smatch and Coccinelle reports per Simon - remove inline in new IPv6 support per Simon - fix memleaks in netlink control plane per Simon -o- The following patchset contains IPv6 GTP driver support for net-next, this also includes IPv6 over IPv4 and vice-versa: Patch #1 removes a unnecessary stack variable initialization in the socket routine. Patch #2 deals with GTP extension headers. This variable length extension header to decapsulate packets accordingly. Otherwise, packets are dropped when these extension headers are present which breaks interoperation with other non-Linux based GTP implementations. Patch #3 prepares for IPv6 support by moving IPv4 specific fields in PDP context objects to a union. Patch #4 adds IPv6 support while retaining backward compatibility. Three new attributes allows to declare an IPv6 GTP tunnel GTPA_FAMILY, GTPA_PEER_ADDR6 and GTPA_MS_ADDR6 as well as IFLA_GTP_LOCAL6 to declare the IPv6 GTP UDP socket. Up to this patch, only IPv6 outer in IPv6 inner is supported. Patch #5 uses IPv6 address /64 prefix for UE/MS in the inner headers. Unlike IPv4, which provides a 1:1 mapping between UE/MS, IPv6 tunnel encapsulates traffic for /64 address as specified by 3GPP TS. Patch has been split from Patch #4 to highlight this behaviour. Patch #6 passes up IPv6 link-local traffic, such as IPv6 SLAAC, for handling to userspace so they are handled as control packets. Patch #7 prepares to allow for GTP IPv4 over IPv6 and vice-versa by moving IP specific debugging out of the function to build IPv4 and IPv6 GTP packets. Patch #8 generalizes TOS/DSCP handling following similar approach as in the existing iptunnel infrastructure. Patch #9 adds a helper function to build an IPv4 GTP packet in the outer header. Patch #10 adds a helper function to build an IPv6 GTP packet in the outer header. Patch #11 adds support for GTP IPv4-over-IPv6 and vice-versa. Patch #12 allows to use the same TID/TEID (tunnel identifier) for inner IPv4 and IPv6 packets for better UE/MS dual stack integration. This series integrates with the osmocom.org project CI and TTCN-3 test infrastructure (Oliver Smith) as well as the userspace libgtpnl library. Thanks to Harald Welte, Oliver Smith and Pau Espin for reviewing and providing feedback through the osmocom.org redmine platform to make this happen. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
bjoto pushed a commit
that referenced
this pull request
May 21, 2024
Pull block updates from Jens Axboe: - Add a partscan attribute in sysfs, fixing an issue with systemd relying on an internal interface that went away. - Attempt #2 at making long running discards interruptible. The previous attempt went into 6.9, but we ended up mostly reverting it as it had issues. - Remove old ida_simple API in bcache - Support for zoned write plugging, greatly improving the performance on zoned devices. - Remove the old throttle low interface, which has been experimental since 2017 and never made it beyond that and isn't being used. - Remove page->index debugging checks in brd, as it hasn't caught anything and prepares us for removing in struct page. - MD pull request from Song - Don't schedule block workers on isolated CPUs * tag 'for-6.10/block-20240511' of git://git.kernel.dk/linux: (84 commits) blk-throttle: delay initialization until configuration blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW block: fix that util can be greater than 100% block: support to account io_ticks precisely block: add plug while submitting IO bcache: fix variable length array abuse in btree_iter bcache: Remove usage of the deprecated ida_simple_xx() API md: Revert "md: Fix overflow in is_mddev_idle" blk-lib: check for kill signal in ioctl BLKDISCARD block: add a bio_await_chain helper block: add a blk_alloc_discard_bio helper block: add a bio_chain_and_submit helper block: move discard checks into the ioctl handler block: remove the discard_granularity check in __blkdev_issue_discard block/ioctl: prefer different overflow check null_blk: Fix the WARNING: modpost: missing MODULE_DESCRIPTION() block: fix and simplify blkdevparts= cmdline parsing block: refine the EOF check in blkdev_iomap_begin block: add a partscan sysfs attribute for disks block: add a disk_has_partscan helper ...
bjoto pushed a commit
that referenced
this pull request
May 21, 2024
…rnel/git/netfilter/nf-next Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: Patch #1 skips transaction if object type provides no .update interface. Patch #2 skips NETDEV_CHANGENAME which is unused. Patch #3 enables conntrack to handle Multicast Router Advertisements and Multicast Router Solicitations from the Multicast Router Discovery protocol (RFC4286) as untracked opposed to invalid packets. From Linus Luessing. Patch #4 updates DCCP conntracker to mark invalid as invalid, instead of dropping them, from Jason Xing. Patch #5 uses NF_DROP instead of -NF_DROP since NF_DROP is 0, also from Jason. Patch #6 removes reference in netfilter's sysctl documentation on pickup entries which were already removed by Florian Westphal. Patch #7 removes check for IPS_OFFLOAD flag to disable early drop which allows to evict entries from the conntrack table, also from Florian. Patches #8 to #16 updates nf_tables pipapo set backend to allocate the datastructure copy on-demand from preparation phase, to better deal with OOM situations where .commit step is too late to fail. Series from Florian Westphal. Patch #17 adds a selftest with packetdrill to cover conntrack TCP state transitions, also from Florian. Patch #18 use GFP_KERNEL to clone elements from control plane to avoid quick atomic reserves exhaustion with large sets, reporter refers to million entries magnitude. * tag 'nf-next-24-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: allow clone callbacks to sleep selftests: netfilter: add packetdrill based conntrack tests netfilter: nft_set_pipapo: remove dirty flag netfilter: nft_set_pipapo: move cloning of match info to insert/removal path netfilter: nft_set_pipapo: prepare pipapo_get helper for on-demand clone netfilter: nft_set_pipapo: merge deactivate helper into caller netfilter: nft_set_pipapo: prepare walk function for on-demand clone netfilter: nft_set_pipapo: prepare destroy function for on-demand clone netfilter: nft_set_pipapo: make pipapo_clone helper return NULL netfilter: nft_set_pipapo: move prove_locking helper around netfilter: conntrack: remove flowtable early-drop test netfilter: conntrack: documentation: remove reference to non-existent sysctl netfilter: use NF_DROP instead of -NF_DROP netfilter: conntrack: dccp: try not to drop skb in conntrack netfilter: conntrack: fix ct-state for ICMPv6 Multicast Router Discovery netfilter: nf_tables: remove NETDEV_CHANGENAME from netdev chain event handler netfilter: nf_tables: skip transaction if update object is not implemented ==================== Link: https://lore.kernel.org/r/20240512161436.168973-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bjoto pushed a commit
that referenced
this pull request
May 21, 2024
Xuan Zhuo says: ==================== virtio_net: rx enable premapped mode by default Actually, for the virtio drivers, we can enable premapped mode whatever the value of use_dma_api. Because we provide the virtio dma apis. So the driver can enable premapped mode unconditionally. This patch set makes the big mode of virtio-net to support premapped mode. And enable premapped mode for rx by default. Based on the following points, we do not use page pool to manage these pages: 1. virtio-net uses the DMA APIs wrapped by virtio core. Therefore, we can only prevent the page pool from performing DMA operations, and let the driver perform DMA operations on the allocated pages. 2. But when the page pool releases the page, we have no chance to execute dma unmap. 3. A solution to #2 is to execute dma unmap every time before putting the page back to the page pool. (This is actually a waste, we don't execute unmap so frequently.) 4. But there is another problem, we still need to use page.dma_addr to save the dma address. Using page.dma_addr while using page pool is unsafe behavior. 5. And we need space the chain the pages submitted once to virtio core. More: https://lore.kernel.org/all/CACGkMEu=Aok9z2imB_c5qVuujSh=vjj1kx12fy9N7hqyi+M5Ow@mail.gmail.com/ Why we do not use the page space to store the dma? http://lore.kernel.org/all/CACGkMEuyeJ9mMgYnnB42=hw6umNuo=agn7VBqBqYPd7GN=+39Q@mail.gmail.com ==================== Link: https://lore.kernel.org/r/20240511031404.30903-1-xuanzhuo@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bjoto pushed a commit
that referenced
this pull request
May 21, 2024
This adds a check before freeing the rx->skb in flush and close functions to handle the kernel crash seen while removing driver after FW download fails or before FW download completes. dmesg log: [ 54.634586] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000080 [ 54.643398] Mem abort info: [ 54.646204] ESR = 0x0000000096000004 [ 54.649964] EC = 0x25: DABT (current EL), IL = 32 bits [ 54.655286] SET = 0, FnV = 0 [ 54.658348] EA = 0, S1PTW = 0 [ 54.661498] FSC = 0x04: level 0 translation fault [ 54.666391] Data abort info: [ 54.669273] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 54.674768] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 54.674771] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 54.674775] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000048860000 [ 54.674780] [0000000000000080] pgd=0000000000000000, p4d=0000000000000000 [ 54.703880] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 54.710152] Modules linked in: btnxpuart(-) overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce polyval_generic snd_soc_imx_spdif snd_soc_imx_card snd_soc_ak5558 snd_soc_ak4458 caam secvio error snd_soc_fsl_micfil snd_soc_fsl_spdif snd_soc_fsl_sai snd_soc_fsl_utils imx_pcm_dma gpio_ir_recv rc_core sch_fq_codel fuse [ 54.744357] CPU: 3 PID: 72 Comm: kworker/u9:0 Not tainted 6.6.3-otbr-g128004619037 #2 [ 54.744364] Hardware name: FSL i.MX8MM EVK board (DT) [ 54.744368] Workqueue: hci0 hci_power_on [ 54.757244] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 54.757249] pc : kfree_skb_reason+0x18/0xb0 [ 54.772299] lr : btnxpuart_flush+0x40/0x58 [btnxpuart] [ 54.782921] sp : ffff8000805ebca0 [ 54.782923] x29: ffff8000805ebca0 x28: ffffa5c6cf1869c0 x27: ffffa5c6cf186000 [ 54.782931] x26: ffff377b84852400 x25: ffff377b848523c0 x24: ffff377b845e7230 [ 54.782938] x23: ffffa5c6ce8dbe08 x22: ffffa5c6ceb65410 x21: 00000000ffffff92 [ 54.782945] x20: ffffa5c6ce8dbe98 x19: ffffffffffffffac x18: ffffffffffffffff [ 54.807651] x17: 0000000000000000 x16: ffffa5c6ce2824ec x15: ffff8001005eb857 [ 54.821917] x14: 0000000000000000 x13: ffffa5c6cf1a02e0 x12: 0000000000000642 [ 54.821924] x11: 0000000000000040 x10: ffffa5c6cf19d690 x9 : ffffa5c6cf19d688 [ 54.821931] x8 : ffff377b86000028 x7 : 0000000000000000 x6 : 0000000000000000 [ 54.821938] x5 : ffff377b86000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 54.843331] x2 : 0000000000000000 x1 : 0000000000000002 x0 : ffffffffffffffac [ 54.857599] Call trace: [ 54.857601] kfree_skb_reason+0x18/0xb0 [ 54.863878] btnxpuart_flush+0x40/0x58 [btnxpuart] [ 54.863888] hci_dev_open_sync+0x3a8/0xa04 [ 54.872773] hci_power_on+0x54/0x2e4 [ 54.881832] process_one_work+0x138/0x260 [ 54.881842] worker_thread+0x32c/0x438 [ 54.881847] kthread+0x118/0x11c [ 54.881853] ret_from_fork+0x10/0x20 [ 54.896406] Code: a9be7bfd 910003fd f9000bf3 aa0003f3 (b940d400) [ 54.896410] ---[ end trace 0000000000000000 ]--- Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Tested-by: Guillaume Legoupil <guillaume.legoupil@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bjoto pushed a commit
that referenced
this pull request
May 21, 2024
Patch series "Introduce mseal", v10. This patchset proposes a new mseal() syscall for the Linux kernel. In a nutshell, mseal() protects the VMAs of a given virtual memory range against modifications, such as changes to their permission bits. Modern CPUs support memory permissions, such as the read/write (RW) and no-execute (NX) bits. Linux has supported NX since the release of kernel version 2.6.8 in August 2004 [1]. The memory permission feature improves the security stance on memory corruption bugs, as an attacker cannot simply write to arbitrary memory and point the code to it. The memory must be marked with the X bit, or else an exception will occur. Internally, the kernel maintains the memory permissions in a data structure called VMA (vm_area_struct). mseal() additionally protects the VMA itself against modifications of the selected seal type. Memory sealing is useful to mitigate memory corruption issues where a corrupted pointer is passed to a memory management system. For example, such an attacker primitive can break control-flow integrity guarantees since read-only memory that is supposed to be trusted can become writable or .text pages can get remapped. Memory sealing can automatically be applied by the runtime loader to seal .text and .rodata pages and applications can additionally seal security critical data at runtime. A similar feature already exists in the XNU kernel with the VM_FLAGS_PERMANENT [3] flag and on OpenBSD with the mimmutable syscall [4]. Also, Chrome wants to adopt this feature for their CFI work [2] and this patchset has been designed to be compatible with the Chrome use case. Two system calls are involved in sealing the map: mmap() and mseal(). The new mseal() is an syscall on 64 bit CPU, and with following signature: int mseal(void addr, size_t len, unsigned long flags) addr/len: memory range. flags: reserved. mseal() blocks following operations for the given memory range. 1> Unmapping, moving to another location, and shrinking the size, via munmap() and mremap(), can leave an empty space, therefore can be replaced with a VMA with a new set of attributes. 2> Moving or expanding a different VMA into the current location, via mremap(). 3> Modifying a VMA via mmap(MAP_FIXED). 4> Size expansion, via mremap(), does not appear to pose any specific risks to sealed VMAs. It is included anyway because the use case is unclear. In any case, users can rely on merging to expand a sealed VMA. 5> mprotect() and pkey_mprotect(). 6> Some destructive madvice() behaviors (e.g. MADV_DONTNEED) for anonymous memory, when users don't have write permission to the memory. Those behaviors can alter region contents by discarding pages, effectively a memset(0) for anonymous memory. The idea that inspired this patch comes from Stephen Röttger’s work in V8 CFI [5]. Chrome browser in ChromeOS will be the first user of this API. Indeed, the Chrome browser has very specific requirements for sealing, which are distinct from those of most applications. For example, in the case of libc, sealing is only applied to read-only (RO) or read-execute (RX) memory segments (such as .text and .RELRO) to prevent them from becoming writable, the lifetime of those mappings are tied to the lifetime of the process. Chrome wants to seal two large address space reservations that are managed by different allocators. The memory is mapped RW- and RWX respectively but write access to it is restricted using pkeys (or in the future ARM permission overlay extensions). The lifetime of those mappings are not tied to the lifetime of the process, therefore, while the memory is sealed, the allocators still need to free or discard the unused memory. For example, with madvise(DONTNEED). However, always allowing madvise(DONTNEED) on this range poses a security risk. For example if a jump instruction crosses a page boundary and the second page gets discarded, it will overwrite the target bytes with zeros and change the control flow. Checking write-permission before the discard operation allows us to control when the operation is valid. In this case, the madvise will only succeed if the executing thread has PKEY write permissions and PKRU changes are protected in software by control-flow integrity. Although the initial version of this patch series is targeting the Chrome browser as its first user, it became evident during upstream discussions that we would also want to ensure that the patch set eventually is a complete solution for memory sealing and compatible with other use cases. The specific scenario currently in mind is glibc's use case of loading and sealing ELF executables. To this end, Stephen is working on a change to glibc to add sealing support to the dynamic linker, which will seal all non-writable segments at startup. Once this work is completed, all applications will be able to automatically benefit from these new protections. In closing, I would like to formally acknowledge the valuable contributions received during the RFC process, which were instrumental in shaping this patch: Jann Horn: raising awareness and providing valuable insights on the destructive madvise operations. Liam R. Howlett: perf optimization. Linus Torvalds: assisting in defining system call signature and scope. Theo de Raadt: sharing the experiences and insight gained from implementing mimmutable() in OpenBSD. MM perf benchmarks ================== This patch adds a loop in the mprotect/munmap/madvise(DONTNEED) to check the VMAs’ sealing flag, so that no partial update can be made, when any segment within the given memory range is sealed. To measure the performance impact of this loop, two tests are developed. [8] The first is measuring the time taken for a particular system call, by using clock_gettime(CLOCK_MONOTONIC). The second is using PERF_COUNT_HW_REF_CPU_CYCLES (exclude user space). Both tests have similar results. The tests have roughly below sequence: for (i = 0; i < 1000, i++) create 1000 mappings (1 page per VMA) start the sampling for (j = 0; j < 1000, j++) mprotect one mapping stop and save the sample delete 1000 mappings calculates all samples. Below tests are performed on Intel(R) Pentium(R) Gold 7505 @ 2.00GHz, 4G memory, Chromebook. Based on the latest upstream code: The first test (measuring time) syscall__ vmas t t_mseal delta_ns per_vma % munmap__ 1 909 944 35 35 104% munmap__ 2 1398 1502 104 52 107% munmap__ 4 2444 2594 149 37 106% munmap__ 8 4029 4323 293 37 107% munmap__ 16 6647 6935 288 18 104% munmap__ 32 11811 12398 587 18 105% mprotect 1 439 465 26 26 106% mprotect 2 1659 1745 86 43 105% mprotect 4 3747 3889 142 36 104% mprotect 8 6755 6969 215 27 103% mprotect 16 13748 14144 396 25 103% mprotect 32 27827 28969 1142 36 104% madvise_ 1 240 262 22 22 109% madvise_ 2 366 442 76 38 121% madvise_ 4 623 751 128 32 121% madvise_ 8 1110 1324 215 27 119% madvise_ 16 2127 2451 324 20 115% madvise_ 32 4109 4642 534 17 113% The second test (measuring cpu cycle) syscall__ vmas cpu cmseal delta_cpu per_vma % munmap__ 1 1790 1890 100 100 106% munmap__ 2 2819 3033 214 107 108% munmap__ 4 4959 5271 312 78 106% munmap__ 8 8262 8745 483 60 106% munmap__ 16 13099 14116 1017 64 108% munmap__ 32 23221 24785 1565 49 107% mprotect 1 906 967 62 62 107% mprotect 2 3019 3203 184 92 106% mprotect 4 6149 6569 420 105 107% mprotect 8 9978 10524 545 68 105% mprotect 16 20448 21427 979 61 105% mprotect 32 40972 42935 1963 61 105% madvise_ 1 434 497 63 63 115% madvise_ 2 752 899 147 74 120% madvise_ 4 1313 1513 200 50 115% madvise_ 8 2271 2627 356 44 116% madvise_ 16 4312 4883 571 36 113% madvise_ 32 8376 9319 943 29 111% Based on the result, for 6.8 kernel, sealing check adds 20-40 nano seconds, or around 50-100 CPU cycles, per VMA. In addition, I applied the sealing to 5.10 kernel: The first test (measuring time) syscall__ vmas t tmseal delta_ns per_vma % munmap__ 1 357 390 33 33 109% munmap__ 2 442 463 21 11 105% munmap__ 4 614 634 20 5 103% munmap__ 8 1017 1137 120 15 112% munmap__ 16 1889 2153 263 16 114% munmap__ 32 4109 4088 -21 -1 99% mprotect 1 235 227 -7 -7 97% mprotect 2 495 464 -30 -15 94% mprotect 4 741 764 24 6 103% mprotect 8 1434 1437 2 0 100% mprotect 16 2958 2991 33 2 101% mprotect 32 6431 6608 177 6 103% madvise_ 1 191 208 16 16 109% madvise_ 2 300 324 24 12 108% madvise_ 4 450 473 23 6 105% madvise_ 8 753 806 53 7 107% madvise_ 16 1467 1592 125 8 108% madvise_ 32 2795 3405 610 19 122% The second test (measuring cpu cycle) syscall__ nbr_vma cpu cmseal delta_cpu per_vma % munmap__ 1 684 715 31 31 105% munmap__ 2 861 898 38 19 104% munmap__ 4 1183 1235 51 13 104% munmap__ 8 1999 2045 46 6 102% munmap__ 16 3839 3816 -23 -1 99% munmap__ 32 7672 7887 216 7 103% mprotect 1 397 443 46 46 112% mprotect 2 738 788 50 25 107% mprotect 4 1221 1256 35 9 103% mprotect 8 2356 2429 72 9 103% mprotect 16 4961 4935 -26 -2 99% mprotect 32 9882 10172 291 9 103% madvise_ 1 351 380 29 29 108% madvise_ 2 565 615 49 25 109% madvise_ 4 872 933 61 15 107% madvise_ 8 1508 1640 132 16 109% madvise_ 16 3078 3323 245 15 108% madvise_ 32 5893 6704 811 25 114% For 5.10 kernel, sealing check adds 0-15 ns in time, or 10-30 CPU cycles, there is even decrease in some cases. It might be interesting to compare 5.10 and 6.8 kernel The first test (measuring time) syscall__ vmas t_5_10 t_6_8 delta_ns per_vma % munmap__ 1 357 909 552 552 254% munmap__ 2 442 1398 956 478 316% munmap__ 4 614 2444 1830 458 398% munmap__ 8 1017 4029 3012 377 396% munmap__ 16 1889 6647 4758 297 352% munmap__ 32 4109 11811 7702 241 287% mprotect 1 235 439 204 204 187% mprotect 2 495 1659 1164 582 335% mprotect 4 741 3747 3006 752 506% mprotect 8 1434 6755 5320 665 471% mprotect 16 2958 13748 10790 674 465% mprotect 32 6431 27827 21397 669 433% madvise_ 1 191 240 49 49 125% madvise_ 2 300 366 67 33 122% madvise_ 4 450 623 173 43 138% madvise_ 8 753 1110 357 45 147% madvise_ 16 1467 2127 660 41 145% madvise_ 32 2795 4109 1314 41 147% The second test (measuring cpu cycle) syscall__ vmas cpu_5_10 c_6_8 delta_cpu per_vma % munmap__ 1 684 1790 1106 1106 262% munmap__ 2 861 2819 1958 979 327% munmap__ 4 1183 4959 3776 944 419% munmap__ 8 1999 8262 6263 783 413% munmap__ 16 3839 13099 9260 579 341% munmap__ 32 7672 23221 15549 486 303% mprotect 1 397 906 509 509 228% mprotect 2 738 3019 2281 1140 409% mprotect 4 1221 6149 4929 1232 504% mprotect 8 2356 9978 7622 953 423% mprotect 16 4961 20448 15487 968 412% mprotect 32 9882 40972 31091 972 415% madvise_ 1 351 434 82 82 123% madvise_ 2 565 752 186 93 133% madvise_ 4 872 1313 442 110 151% madvise_ 8 1508 2271 763 95 151% madvise_ 16 3078 4312 1234 77 140% madvise_ 32 5893 8376 2483 78 142% From 5.10 to 6.8 munmap: added 250-550 ns in time, or 500-1100 in cpu cycle, per vma. mprotect: added 200-750 ns in time, or 500-1200 in cpu cycle, per vma. madvise: added 33-50 ns in time, or 70-110 in cpu cycle, per vma. In comparison to mseal, which adds 20-40 ns or 50-100 CPU cycles, the increase from 5.10 to 6.8 is significantly larger, approximately ten times greater for munmap and mprotect. When I discuss the mm performance with Brian Makin, an engineer who worked on performance, it was brought to my attention that such performance benchmarks, which measuring millions of mm syscall in a tight loop, may not accurately reflect real-world scenarios, such as that of a database service. Also this is tested using a single HW and ChromeOS, the data from another HW or distribution might be different. It might be best to take this data with a grain of salt. This patch (of 5): Wire up mseal syscall for all architectures. Link: https://lkml.kernel.org/r/20240415163527.626541-1-jeffxu@chromium.org Link: https://lkml.kernel.org/r/20240415163527.626541-2-jeffxu@chromium.org Signed-off-by: Jeff Xu <jeffxu@chromium.org> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Jann Horn <jannh@google.com> [Bug #2] Cc: Jeff Xu <jeffxu@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jorge Lucangeli Obes <jorgelo@chromium.org> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Pedro Falcato <pedro.falcato@gmail.com> Cc: Stephen Röttger <sroettger@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Amer Al Shanawany <amer.shanawany@gmail.com> Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
bjoto pushed a commit
that referenced
this pull request
May 29, 2024
In dctcp_update_alpha(), we use a module parameter dctcp_shift_g as follows: alpha -= min_not_zero(alpha, alpha >> dctcp_shift_g); ... delivered_ce <<= (10 - dctcp_shift_g); It seems syzkaller started fuzzing module parameters and triggered shift-out-of-bounds [0] by setting 100 to dctcp_shift_g: memcpy((void*)0x20000080, "/sys/module/tcp_dctcp/parameters/dctcp_shift_g\000", 47); res = syscall(__NR_openat, /*fd=*/0xffffffffffffff9cul, /*file=*/0x20000080ul, /*flags=*/2ul, /*mode=*/0ul); memcpy((void*)0x20000000, "100\000", 4); syscall(__NR_write, /*fd=*/r[0], /*val=*/0x20000000ul, /*len=*/4ul); Let's limit the max value of dctcp_shift_g by param_set_uint_minmax(). With this patch: # echo 10 > /sys/module/tcp_dctcp/parameters/dctcp_shift_g # cat /sys/module/tcp_dctcp/parameters/dctcp_shift_g 10 # echo 11 > /sys/module/tcp_dctcp/parameters/dctcp_shift_g -bash: echo: write error: Invalid argument [0]: UBSAN: shift-out-of-bounds in net/ipv4/tcp_dctcp.c:143:12 shift exponent 100 is too large for 32-bit type 'u32' (aka 'unsigned int') CPU: 0 PID: 8083 Comm: syz-executor345 Not tainted 6.9.0-05151-g1b294a1f3561 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x201/0x300 lib/dump_stack.c:114 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_shift_out_of_bounds+0x346/0x3a0 lib/ubsan.c:468 dctcp_update_alpha+0x540/0x570 net/ipv4/tcp_dctcp.c:143 tcp_in_ack_event net/ipv4/tcp_input.c:3802 [inline] tcp_ack+0x17b1/0x3bc0 net/ipv4/tcp_input.c:3948 tcp_rcv_state_process+0x57a/0x2290 net/ipv4/tcp_input.c:6711 tcp_v4_do_rcv+0x764/0xc40 net/ipv4/tcp_ipv4.c:1937 sk_backlog_rcv include/net/sock.h:1106 [inline] __release_sock+0x20f/0x350 net/core/sock.c:2983 release_sock+0x61/0x1f0 net/core/sock.c:3549 mptcp_subflow_shutdown+0x3d0/0x620 net/mptcp/protocol.c:2907 mptcp_check_send_data_fin+0x225/0x410 net/mptcp/protocol.c:2976 __mptcp_close+0x238/0xad0 net/mptcp/protocol.c:3072 mptcp_close+0x2a/0x1a0 net/mptcp/protocol.c:3127 inet_release+0x190/0x1f0 net/ipv4/af_inet.c:437 __sock_release net/socket.c:659 [inline] sock_close+0xc0/0x240 net/socket.c:1421 __fput+0x41b/0x890 fs/file_table.c:422 task_work_run+0x23b/0x300 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x9c8/0x2540 kernel/exit.c:878 do_group_exit+0x201/0x2b0 kernel/exit.c:1027 __do_sys_exit_group kernel/exit.c:1038 [inline] __se_sys_exit_group kernel/exit.c:1036 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1036 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xe4/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x67/0x6f RIP: 0033:0x7f6c2b5005b6 Code: Unable to access opcode bytes at 0x7f6c2b50058c. RSP: 002b:00007ffe883eb948 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 00007f6c2b5862f0 RCX: 00007f6c2b5005b6 RDX: 0000000000000001 RSI: 000000000000003c RDI: 0000000000000001 RBP: 0000000000000001 R08: 00000000000000e7 R09: ffffffffffffffc0 R10: 0000000000000006 R11: 0000000000000246 R12: 00007f6c2b5862f0 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001 </TASK> Reported-by: syzkaller <syzkaller@googlegroups.com> Reported-by: Yue Sun <samsun1006219@gmail.com> Reported-by: xingwei lee <xrivendell7@gmail.com> Closes: https://lore.kernel.org/netdev/CAEkJfYNJM=cw-8x7_Vmj1J6uYVCWMbbvD=EFmDPVBGpTsqOxEA@mail.gmail.com/ Fixes: e3118e8 ("net: tcp: add DCTCP congestion control algorithm") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240517091626.32772-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
bjoto pushed a commit
that referenced
this pull request
May 29, 2024
Patch series "Introduce mseal", v10. This patchset proposes a new mseal() syscall for the Linux kernel. In a nutshell, mseal() protects the VMAs of a given virtual memory range against modifications, such as changes to their permission bits. Modern CPUs support memory permissions, such as the read/write (RW) and no-execute (NX) bits. Linux has supported NX since the release of kernel version 2.6.8 in August 2004 [1]. The memory permission feature improves the security stance on memory corruption bugs, as an attacker cannot simply write to arbitrary memory and point the code to it. The memory must be marked with the X bit, or else an exception will occur. Internally, the kernel maintains the memory permissions in a data structure called VMA (vm_area_struct). mseal() additionally protects the VMA itself against modifications of the selected seal type. Memory sealing is useful to mitigate memory corruption issues where a corrupted pointer is passed to a memory management system. For example, such an attacker primitive can break control-flow integrity guarantees since read-only memory that is supposed to be trusted can become writable or .text pages can get remapped. Memory sealing can automatically be applied by the runtime loader to seal .text and .rodata pages and applications can additionally seal security critical data at runtime. A similar feature already exists in the XNU kernel with the VM_FLAGS_PERMANENT [3] flag and on OpenBSD with the mimmutable syscall [4]. Also, Chrome wants to adopt this feature for their CFI work [2] and this patchset has been designed to be compatible with the Chrome use case. Two system calls are involved in sealing the map: mmap() and mseal(). The new mseal() is an syscall on 64 bit CPU, and with following signature: int mseal(void addr, size_t len, unsigned long flags) addr/len: memory range. flags: reserved. mseal() blocks following operations for the given memory range. 1> Unmapping, moving to another location, and shrinking the size, via munmap() and mremap(), can leave an empty space, therefore can be replaced with a VMA with a new set of attributes. 2> Moving or expanding a different VMA into the current location, via mremap(). 3> Modifying a VMA via mmap(MAP_FIXED). 4> Size expansion, via mremap(), does not appear to pose any specific risks to sealed VMAs. It is included anyway because the use case is unclear. In any case, users can rely on merging to expand a sealed VMA. 5> mprotect() and pkey_mprotect(). 6> Some destructive madvice() behaviors (e.g. MADV_DONTNEED) for anonymous memory, when users don't have write permission to the memory. Those behaviors can alter region contents by discarding pages, effectively a memset(0) for anonymous memory. The idea that inspired this patch comes from Stephen Röttger’s work in V8 CFI [5]. Chrome browser in ChromeOS will be the first user of this API. Indeed, the Chrome browser has very specific requirements for sealing, which are distinct from those of most applications. For example, in the case of libc, sealing is only applied to read-only (RO) or read-execute (RX) memory segments (such as .text and .RELRO) to prevent them from becoming writable, the lifetime of those mappings are tied to the lifetime of the process. Chrome wants to seal two large address space reservations that are managed by different allocators. The memory is mapped RW- and RWX respectively but write access to it is restricted using pkeys (or in the future ARM permission overlay extensions). The lifetime of those mappings are not tied to the lifetime of the process, therefore, while the memory is sealed, the allocators still need to free or discard the unused memory. For example, with madvise(DONTNEED). However, always allowing madvise(DONTNEED) on this range poses a security risk. For example if a jump instruction crosses a page boundary and the second page gets discarded, it will overwrite the target bytes with zeros and change the control flow. Checking write-permission before the discard operation allows us to control when the operation is valid. In this case, the madvise will only succeed if the executing thread has PKEY write permissions and PKRU changes are protected in software by control-flow integrity. Although the initial version of this patch series is targeting the Chrome browser as its first user, it became evident during upstream discussions that we would also want to ensure that the patch set eventually is a complete solution for memory sealing and compatible with other use cases. The specific scenario currently in mind is glibc's use case of loading and sealing ELF executables. To this end, Stephen is working on a change to glibc to add sealing support to the dynamic linker, which will seal all non-writable segments at startup. Once this work is completed, all applications will be able to automatically benefit from these new protections. In closing, I would like to formally acknowledge the valuable contributions received during the RFC process, which were instrumental in shaping this patch: Jann Horn: raising awareness and providing valuable insights on the destructive madvise operations. Liam R. Howlett: perf optimization. Linus Torvalds: assisting in defining system call signature and scope. Theo de Raadt: sharing the experiences and insight gained from implementing mimmutable() in OpenBSD. MM perf benchmarks ================== This patch adds a loop in the mprotect/munmap/madvise(DONTNEED) to check the VMAs’ sealing flag, so that no partial update can be made, when any segment within the given memory range is sealed. To measure the performance impact of this loop, two tests are developed. [8] The first is measuring the time taken for a particular system call, by using clock_gettime(CLOCK_MONOTONIC). The second is using PERF_COUNT_HW_REF_CPU_CYCLES (exclude user space). Both tests have similar results. The tests have roughly below sequence: for (i = 0; i < 1000, i++) create 1000 mappings (1 page per VMA) start the sampling for (j = 0; j < 1000, j++) mprotect one mapping stop and save the sample delete 1000 mappings calculates all samples. Below tests are performed on Intel(R) Pentium(R) Gold 7505 @ 2.00GHz, 4G memory, Chromebook. Based on the latest upstream code: The first test (measuring time) syscall__ vmas t t_mseal delta_ns per_vma % munmap__ 1 909 944 35 35 104% munmap__ 2 1398 1502 104 52 107% munmap__ 4 2444 2594 149 37 106% munmap__ 8 4029 4323 293 37 107% munmap__ 16 6647 6935 288 18 104% munmap__ 32 11811 12398 587 18 105% mprotect 1 439 465 26 26 106% mprotect 2 1659 1745 86 43 105% mprotect 4 3747 3889 142 36 104% mprotect 8 6755 6969 215 27 103% mprotect 16 13748 14144 396 25 103% mprotect 32 27827 28969 1142 36 104% madvise_ 1 240 262 22 22 109% madvise_ 2 366 442 76 38 121% madvise_ 4 623 751 128 32 121% madvise_ 8 1110 1324 215 27 119% madvise_ 16 2127 2451 324 20 115% madvise_ 32 4109 4642 534 17 113% The second test (measuring cpu cycle) syscall__ vmas cpu cmseal delta_cpu per_vma % munmap__ 1 1790 1890 100 100 106% munmap__ 2 2819 3033 214 107 108% munmap__ 4 4959 5271 312 78 106% munmap__ 8 8262 8745 483 60 106% munmap__ 16 13099 14116 1017 64 108% munmap__ 32 23221 24785 1565 49 107% mprotect 1 906 967 62 62 107% mprotect 2 3019 3203 184 92 106% mprotect 4 6149 6569 420 105 107% mprotect 8 9978 10524 545 68 105% mprotect 16 20448 21427 979 61 105% mprotect 32 40972 42935 1963 61 105% madvise_ 1 434 497 63 63 115% madvise_ 2 752 899 147 74 120% madvise_ 4 1313 1513 200 50 115% madvise_ 8 2271 2627 356 44 116% madvise_ 16 4312 4883 571 36 113% madvise_ 32 8376 9319 943 29 111% Based on the result, for 6.8 kernel, sealing check adds 20-40 nano seconds, or around 50-100 CPU cycles, per VMA. In addition, I applied the sealing to 5.10 kernel: The first test (measuring time) syscall__ vmas t tmseal delta_ns per_vma % munmap__ 1 357 390 33 33 109% munmap__ 2 442 463 21 11 105% munmap__ 4 614 634 20 5 103% munmap__ 8 1017 1137 120 15 112% munmap__ 16 1889 2153 263 16 114% munmap__ 32 4109 4088 -21 -1 99% mprotect 1 235 227 -7 -7 97% mprotect 2 495 464 -30 -15 94% mprotect 4 741 764 24 6 103% mprotect 8 1434 1437 2 0 100% mprotect 16 2958 2991 33 2 101% mprotect 32 6431 6608 177 6 103% madvise_ 1 191 208 16 16 109% madvise_ 2 300 324 24 12 108% madvise_ 4 450 473 23 6 105% madvise_ 8 753 806 53 7 107% madvise_ 16 1467 1592 125 8 108% madvise_ 32 2795 3405 610 19 122% The second test (measuring cpu cycle) syscall__ nbr_vma cpu cmseal delta_cpu per_vma % munmap__ 1 684 715 31 31 105% munmap__ 2 861 898 38 19 104% munmap__ 4 1183 1235 51 13 104% munmap__ 8 1999 2045 46 6 102% munmap__ 16 3839 3816 -23 -1 99% munmap__ 32 7672 7887 216 7 103% mprotect 1 397 443 46 46 112% mprotect 2 738 788 50 25 107% mprotect 4 1221 1256 35 9 103% mprotect 8 2356 2429 72 9 103% mprotect 16 4961 4935 -26 -2 99% mprotect 32 9882 10172 291 9 103% madvise_ 1 351 380 29 29 108% madvise_ 2 565 615 49 25 109% madvise_ 4 872 933 61 15 107% madvise_ 8 1508 1640 132 16 109% madvise_ 16 3078 3323 245 15 108% madvise_ 32 5893 6704 811 25 114% For 5.10 kernel, sealing check adds 0-15 ns in time, or 10-30 CPU cycles, there is even decrease in some cases. It might be interesting to compare 5.10 and 6.8 kernel The first test (measuring time) syscall__ vmas t_5_10 t_6_8 delta_ns per_vma % munmap__ 1 357 909 552 552 254% munmap__ 2 442 1398 956 478 316% munmap__ 4 614 2444 1830 458 398% munmap__ 8 1017 4029 3012 377 396% munmap__ 16 1889 6647 4758 297 352% munmap__ 32 4109 11811 7702 241 287% mprotect 1 235 439 204 204 187% mprotect 2 495 1659 1164 582 335% mprotect 4 741 3747 3006 752 506% mprotect 8 1434 6755 5320 665 471% mprotect 16 2958 13748 10790 674 465% mprotect 32 6431 27827 21397 669 433% madvise_ 1 191 240 49 49 125% madvise_ 2 300 366 67 33 122% madvise_ 4 450 623 173 43 138% madvise_ 8 753 1110 357 45 147% madvise_ 16 1467 2127 660 41 145% madvise_ 32 2795 4109 1314 41 147% The second test (measuring cpu cycle) syscall__ vmas cpu_5_10 c_6_8 delta_cpu per_vma % munmap__ 1 684 1790 1106 1106 262% munmap__ 2 861 2819 1958 979 327% munmap__ 4 1183 4959 3776 944 419% munmap__ 8 1999 8262 6263 783 413% munmap__ 16 3839 13099 9260 579 341% munmap__ 32 7672 23221 15549 486 303% mprotect 1 397 906 509 509 228% mprotect 2 738 3019 2281 1140 409% mprotect 4 1221 6149 4929 1232 504% mprotect 8 2356 9978 7622 953 423% mprotect 16 4961 20448 15487 968 412% mprotect 32 9882 40972 31091 972 415% madvise_ 1 351 434 82 82 123% madvise_ 2 565 752 186 93 133% madvise_ 4 872 1313 442 110 151% madvise_ 8 1508 2271 763 95 151% madvise_ 16 3078 4312 1234 77 140% madvise_ 32 5893 8376 2483 78 142% From 5.10 to 6.8 munmap: added 250-550 ns in time, or 500-1100 in cpu cycle, per vma. mprotect: added 200-750 ns in time, or 500-1200 in cpu cycle, per vma. madvise: added 33-50 ns in time, or 70-110 in cpu cycle, per vma. In comparison to mseal, which adds 20-40 ns or 50-100 CPU cycles, the increase from 5.10 to 6.8 is significantly larger, approximately ten times greater for munmap and mprotect. When I discuss the mm performance with Brian Makin, an engineer who worked on performance, it was brought to my attention that such performance benchmarks, which measuring millions of mm syscall in a tight loop, may not accurately reflect real-world scenarios, such as that of a database service. Also this is tested using a single HW and ChromeOS, the data from another HW or distribution might be different. It might be best to take this data with a grain of salt. This patch (of 5): Wire up mseal syscall for all architectures. Link: https://lkml.kernel.org/r/20240415163527.626541-1-jeffxu@chromium.org Link: https://lkml.kernel.org/r/20240415163527.626541-2-jeffxu@chromium.org Signed-off-by: Jeff Xu <jeffxu@chromium.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Jann Horn <jannh@google.com> [Bug #2] Cc: Jeff Xu <jeffxu@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jorge Lucangeli Obes <jorgelo@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Pedro Falcato <pedro.falcato@gmail.com> Cc: Stephen Röttger <sroettger@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Amer Al Shanawany <amer.shanawany@gmail.com> Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
bjoto pushed a commit
that referenced
this pull request
Jun 5, 2024
…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 syzbot reports that nf_reinject() could be called without rcu_read_lock() when flushing pending packets at nfnetlink queue removal, from Eric Dumazet. Patch #2 flushes ipset list:set when canceling garbage collection to reference to other lists to fix a race, from Jozsef Kadlecsik. Patch #3 restores q-in-q matching with nft_payload by reverting f6ae9f1 ("netfilter: nft_payload: add C-VLAN support"). Patch #4 fixes vlan mangling in skbuff when vlan offload is present in skbuff, without this patch nft_payload corrupts packets in this case. Patch #5 fixes possible nul-deref in tproxy no IP address is found in netdevice, reported by syzbot and patch from Florian Westphal. Patch #6 removes a superfluous restriction which prevents loose fib lookups from input and forward hooks, from Eric Garver. My assessment is that patches #1, #2 and #5 address possible kernel crash, anything else in this batch fixes broken features. netfilter pull request 24-05-29 * tag 'nf-24-05-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_fib: allow from forward/input without iif selector netfilter: tproxy: bail out if IP has been disabled on the device netfilter: nft_payload: skbuff vlan metadata mangle support netfilter: nft_payload: restore vlan q-in-q match support netfilter: ipset: Add list flush to cancel_gc netfilter: nfnetlink_queue: acquire rcu_read_lock() in instance_destroy_rcu() ==================== Link: https://lore.kernel.org/r/20240528225519.1155786-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
bjoto pushed a commit
that referenced
this pull request
Jun 27, 2024
With commit c4cb231 ("iommu/amd: Add support for enable/disable IOPF") we are hitting below issue. This happens because in IOPF enablement path it holds spin lock with irq disable and then tries to take mutex lock. dmesg: ----- [ 0.938739] ============================= [ 0.938740] [ BUG: Invalid wait context ] [ 0.938742] 6.10.0-rc1+ #1 Not tainted [ 0.938745] ----------------------------- [ 0.938746] swapper/0/1 is trying to lock: [ 0.938748] ffffffff8c9f01d8 (&port_lock_key){....}-{3:3}, at: serial8250_console_write+0x78/0x4a0 [ 0.938767] other info that might help us debug this: [ 0.938768] context-{5:5} [ 0.938769] 7 locks held by swapper/0/1: [ 0.938772] #0: ffff888101a91310 (&group->mutex){+.+.}-{4:4}, at: bus_iommu_probe+0x70/0x160 [ 0.938790] #1: ffff888101d1f1b8 (&domain->lock){....}-{3:3}, at: amd_iommu_attach_device+0xa5/0x700 [ 0.938799] #2: ffff888101cc3d18 (&dev_data->lock){....}-{3:3}, at: amd_iommu_attach_device+0xc5/0x700 [ 0.938806] #3: ffff888100052830 (&iommu->lock){....}-{2:2}, at: amd_iommu_iopf_add_device+0x3f/0xa0 [ 0.938813] #4: ffffffff8945a340 (console_lock){+.+.}-{0:0}, at: _printk+0x48/0x50 [ 0.938822] #5: ffffffff8945a390 (console_srcu){....}-{0:0}, at: console_flush_all+0x58/0x4e0 [ 0.938867] #6: ffffffff82459f80 (console_owner){....}-{0:0}, at: console_flush_all+0x1f0/0x4e0 [ 0.938872] stack backtrace: [ 0.938874] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.10.0-rc1+ #1 [ 0.938877] Hardware name: HP HP EliteBook 745 G3/807E, BIOS N73 Ver. 01.39 04/16/2019 Fix above issue by re-arranging code in attach device path: - move device PASID/IOPF enablement outside lock in AMD IOMMU driver. This is safe as core layer holds group->mutex lock before calling iommu_ops->attach_dev. Reported-by: Borislav Petkov <bp@alien8.de> Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Reported-by: Chris Bainbridge <chris.bainbridge@gmail.com> Fixes: c4cb231 ("iommu/amd: Add support for enable/disable IOPF") Tested-by: Borislav Petkov <bp@alien8.de> Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Link: https://lore.kernel.org/r/20240530084801.10758-1-vasant.hegde@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
bjoto pushed a commit
that referenced
this pull request
Jun 27, 2024
Synchronize the dev->driver usage in really_probe() and dev_uevent(). These can run in different threads, what can result in the following race condition for dev->driver uninitialization: Thread #1: ========== really_probe() { ... probe_failed: ... device_unbind_cleanup(dev) { ... dev->driver = NULL; // <= Failed probe sets dev->driver to NULL ... } ... } Thread #2: ========== dev_uevent() { ... if (dev->driver) // If dev->driver is NULLed from really_probe() from here on, // after above check, the system crashes add_uevent_var(env, "DRIVER=%s", dev->driver->name); ... } really_probe() holds the lock, already. So nothing needs to be done there. dev_uevent() is called with lock held, often, too. But not always. What implies that we can't add any locking in dev_uevent() itself. So fix this race by adding the lock to the non-protected path. This is the path where above race is observed: dev_uevent+0x235/0x380 uevent_show+0x10c/0x1f0 <= Add lock here dev_attr_show+0x3a/0xa0 sysfs_kf_seq_show+0x17c/0x250 kernfs_seq_show+0x7c/0x90 seq_read_iter+0x2d7/0x940 kernfs_fop_read_iter+0xc6/0x310 vfs_read+0x5bc/0x6b0 ksys_read+0xeb/0x1b0 __x64_sys_read+0x42/0x50 x64_sys_call+0x27ad/0x2d30 do_syscall_64+0xcd/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Similar cases are reported by syzkaller in https://syzkaller.appspot.com/bug?extid=ffa8143439596313a85a But these are regarding the *initialization* of dev->driver dev->driver = drv; As this switches dev->driver to non-NULL these reports can be considered to be false-positives (which should be "fixed" by this commit, as well, though). The same issue was reported and tried to be fixed back in 2015 in https://lore.kernel.org/lkml/1421259054-2574-1-git-send-email-a.sangwan@samsung.com/ already. Fixes: 239378f ("Driver core: add uevent vars for devices of a class") Cc: stable <stable@kernel.org> Cc: syzbot+ffa8143439596313a85a@syzkaller.appspotmail.com Cc: Ashish Sangwan <a.sangwan@samsung.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Link: https://lore.kernel.org/r/20240513050634.3964461-1-dirk.behme@de.bosch.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bjoto pushed a commit
that referenced
this pull request
Jun 27, 2024
…PLES event" This reverts commit 7d1405c. This causes segfaults in some cases, as reported by Milian: ``` sudo /usr/bin/perf record -z --call-graph dwarf -e cycles -e raw_syscalls:sys_enter ls ... [ perf record: Woken up 3 times to write data ] malloc(): invalid next size (unsorted) Aborted ``` Backtrace with GDB + debuginfod: ``` malloc(): invalid next size (unsorted) Thread 1 "perf" received signal SIGABRT, Aborted. __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 Downloading source file /usr/src/debug/glibc/glibc/nptl/pthread_kill.c 44 return INTERNAL_SYSCALL_ERROR_P (ret) ? INTERNAL_SYSCALL_ERRNO (ret) : 0; (gdb) bt #0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 #1 0x00007ffff6ea8eb3 in __pthread_kill_internal (threadid=<optimized out>, signo=6) at pthread_kill.c:78 #2 0x00007ffff6e50a30 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/ raise.c:26 #3 0x00007ffff6e384c3 in __GI_abort () at abort.c:79 #4 0x00007ffff6e39354 in __libc_message_impl (fmt=fmt@entry=0x7ffff6fc22ea "%s\n") at ../sysdeps/posix/libc_fatal.c:132 #5 0x00007ffff6eb3085 in malloc_printerr (str=str@entry=0x7ffff6fc5850 "malloc(): invalid next size (unsorted)") at malloc.c:5772 #6 0x00007ffff6eb657c in _int_malloc (av=av@entry=0x7ffff6ff6ac0 <main_arena>, bytes=bytes@entry=368) at malloc.c:4081 #7 0x00007ffff6eb877e in __libc_calloc (n=<optimized out>, elem_size=<optimized out>) at malloc.c:3754 #8 0x000055555569bdb6 in perf_session.do_write_header () #9 0x00005555555a373a in __cmd_record.constprop.0 () #10 0x00005555555a6846 in cmd_record () #11 0x000055555564db7f in run_builtin () #12 0x000055555558ed77 in main () ``` Valgrind memcheck: ``` ==45136== Invalid write of size 8 ==45136== at 0x2B38A5: perf_event__synthesize_id_sample (in /usr/bin/perf) ==45136== by 0x157069: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ==45136== Syscall param write(buf) points to unaddressable byte(s) ==45136== at 0x575953D: __libc_write (write.c:26) ==45136== by 0x575953D: write (write.c:24) ==45136== by 0x35761F: ion (in /usr/bin/perf) ==45136== by 0x357778: writen (in /usr/bin/perf) ==45136== by 0x1548F7: record__write (in /usr/bin/perf) ==45136== by 0x15708A: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ----- Closes: https://lore.kernel.org/linux-perf-users/23879991.0LEYPuXRzz@milian-workstation/ Reported-by: Milian Wolff <milian.wolff@kdab.com> Tested-by: Milian Wolff <milian.wolff@kdab.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@kernel.org # 6.8+ Link: https://lore.kernel.org/lkml/Zl9ksOlHJHnKM70p@x1 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bjoto pushed a commit
that referenced
this pull request
Jun 27, 2024
We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
bjoto pushed a commit
that referenced
this pull request
Jun 27, 2024
======================================================
WARNING: possible circular locking dependency detected
6.10.0-rc2-ktest-00018-gebd1d148b278 #144 Not tainted
------------------------------------------------------
fio/1345 is trying to acquire lock:
ffff88813e200ab8 (&c->snapshot_create_lock){++++}-{3:3}, at: bch2_truncate+0x76/0xf0
but task is already holding lock:
ffff888105a1fa38 (&sb->s_type->i_mutex_key#13){+.+.}-{3:3}, at: do_truncate+0x7b/0xc0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&sb->s_type->i_mutex_key#13){+.+.}-{3:3}:
down_write+0x3d/0xd0
bch2_write_iter+0x1c0/0x10f0
vfs_write+0x24a/0x560
__x64_sys_pwrite64+0x77/0xb0
x64_sys_call+0x17e5/0x1ab0
do_syscall_64+0x68/0x130
entry_SYSCALL_64_after_hwframe+0x4b/0x53
-> #1 (sb_writers#10){.+.+}-{0:0}:
mnt_want_write+0x4a/0x1d0
filename_create+0x69/0x1a0
user_path_create+0x38/0x50
bch2_fs_file_ioctl+0x315/0xbf0
__x64_sys_ioctl+0x297/0xaf0
x64_sys_call+0x10cb/0x1ab0
do_syscall_64+0x68/0x130
entry_SYSCALL_64_after_hwframe+0x4b/0x53
-> #0 (&c->snapshot_create_lock){++++}-{3:3}:
__lock_acquire+0x1445/0x25b0
lock_acquire+0xbd/0x2b0
down_read+0x40/0x180
bch2_truncate+0x76/0xf0
bchfs_truncate+0x240/0x3f0
bch2_setattr+0x7b/0xb0
notify_change+0x322/0x4b0
do_truncate+0x8b/0xc0
do_ftruncate+0x110/0x270
__x64_sys_ftruncate+0x43/0x80
x64_sys_call+0x1373/0x1ab0
do_syscall_64+0x68/0x130
entry_SYSCALL_64_after_hwframe+0x4b/0x53
other info that might help us debug this:
Chain exists of:
&c->snapshot_create_lock --> sb_writers#10 --> &sb->s_type->i_mutex_key#13
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&sb->s_type->i_mutex_key#13);
lock(sb_writers#10);
lock(&sb->s_type->i_mutex_key#13);
rlock(&c->snapshot_create_lock);
*** DEADLOCK ***
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>bjoto pushed a commit
that referenced
this pull request
Jun 27, 2024
…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 fixes insufficient sanitization of netlink attributes for the inner expression which can trigger nul-pointer dereference, from Davide Ornaghi. Patch #2 address a report that there is a race condition between namespace cleanup and the garbage collection of the list:set type. This patch resolves this issue with other minor issues as well, from Jozsef Kadlecsik. Patch #3 ip6_route_me_harder() ignores flowlabel/dsfield when ip dscp has been mangled, this unbreaks ip6 dscp set $v, from Florian Westphal. All of these patches address issues that are present in several releases. * tag 'nf-24-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: Use flowlabel flow key when re-routing mangled packets netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type netfilter: nft_inner: validate mandatory meta and payload ==================== Link: https://lore.kernel.org/r/20240611220323.413713-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bjoto pushed a commit
that referenced
this pull request
Jun 27, 2024
Nikolay Aleksandrov says: ==================== net: bridge: mst: fix suspicious rcu usage warning This set fixes a suspicious RCU usage warning triggered by syzbot[1] in the bridge's MST code. After I converted br_mst_set_state to RCU, I forgot to update the vlan group dereference helper. Fix it by using the proper helper, in order to do that we need to pass the vlan group which is already obtained correctly by the callers for their respective context. Patch 01 is a requirement for the fix in patch 02. Note I did consider rcu_dereference_rtnl() but the churn is much bigger and in every part of the bridge. We can do that as a cleanup in net-next. [1] https://syzkaller.appspot.com/bug?extid=9bbe2de1bc9d470eb5fe ============================= WARNING: suspicious RCU usage 6.10.0-rc2-syzkaller-00235-g8a92980606e3 #0 Not tainted ----------------------------- net/bridge/br_private.h:1599 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 4 locks held by syz-executor.1/5374: #0: ffff888022d50b18 (&mm->mmap_lock){++++}-{3:3}, at: mmap_read_lock include/linux/mmap_lock.h:144 [inline] #0: ffff888022d50b18 (&mm->mmap_lock){++++}-{3:3}, at: __mm_populate+0x1b0/0x460 mm/gup.c:2111 #1: ffffc90000a18c00 ((&p->forward_delay_timer)){+.-.}-{0:0}, at: call_timer_fn+0xc0/0x650 kernel/time/timer.c:1789 #2: ffff88805fb2ccb8 (&br->lock){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] #2: ffff88805fb2ccb8 (&br->lock){+.-.}-{2:2}, at: br_forward_delay_timer_expired+0x50/0x440 net/bridge/br_stp_timer.c:86 #3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:329 [inline] #3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:781 [inline] #3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: br_mst_set_state+0x171/0x7a0 net/bridge/br_mst.c:105 stack backtrace: CPU: 1 PID: 5374 Comm: syz-executor.1 Not tainted 6.10.0-rc2-syzkaller-00235-g8a92980606e3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 lockdep_rcu_suspicious+0x221/0x340 kernel/locking/lockdep.c:6712 nbp_vlan_group net/bridge/br_private.h:1599 [inline] br_mst_set_state+0x29e/0x7a0 net/bridge/br_mst.c:106 br_set_state+0x28a/0x7b0 net/bridge/br_stp.c:47 br_forward_delay_timer_expired+0x176/0x440 net/bridge/br_stp_timer.c:88 call_timer_fn+0x18e/0x650 kernel/time/timer.c:1792 expire_timers kernel/time/timer.c:1843 [inline] __run_timers kernel/time/timer.c:2417 [inline] __run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2428 run_timer_base kernel/time/timer.c:2437 [inline] run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2447 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637 irq_exit_rcu+0x9/0x30 kernel/softirq.c:649 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043 </IRQ> <TASK> ==================== Link: https://lore.kernel.org/r/20240609103654.914987-1-razor@blackwall.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bjoto pushed a commit
that referenced
this pull request
Jun 27, 2024
The syzbot fuzzer found that the interrupt-URB completion callback in the cdc-wdm driver was taking too long, and the driver's immediate resubmission of interrupt URBs with -EPROTO status combined with the dummy-hcd emulation to cause a CPU lockup: cdc_wdm 1-1:1.0: nonzero urb status received: -71 cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625] CPU#0 Utilization every 4s during lockup: #1: 98% system, 0% softirq, 3% hardirq, 0% idle #2: 98% system, 0% softirq, 3% hardirq, 0% idle #3: 98% system, 0% softirq, 3% hardirq, 0% idle #4: 98% system, 0% softirq, 3% hardirq, 0% idle #5: 98% system, 1% softirq, 3% hardirq, 0% idle Modules linked in: irq event stamp: 73096 hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/printk.c:2935 [inline] hardirqs last enabled at (73095): [<ffff80008037bc00>] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994 hardirqs last disabled at (73096): [<ffff80008af10b00>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (73096): [<ffff80008af10b00>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (73048): [<ffff8000801ea530>] softirq_handle_end kernel/softirq.c:400 [inline] softirqs last enabled at (73048): [<ffff8000801ea530>] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582 softirqs last disabled at (73043): [<ffff800080020de8>] __do_softirq+0x14/0x20 kernel/softirq.c:588 CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Testing showed that the problem did not occur if the two error messages -- the first two lines above -- were removed; apparently adding material to the kernel log takes a surprisingly large amount of time. In any case, the best approach for preventing these lockups and to avoid spamming the log with thousands of error messages per second is to ratelimit the two dev_err() calls. Therefore we replace them with dev_err_ratelimited(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Suggested-by: Greg KH <gregkh@linuxfoundation.org> Reported-and-tested-by: syzbot+5f996b83575ef4058638@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/00000000000073d54b061a6a1c65@google.com/ Reported-and-tested-by: syzbot+1b2abad17596ad03dcff@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/000000000000f45085061aa9b37e@google.com/ Fixes: 9908a32 ("USB: remove err() macro from usb class drivers") Link: https://lore.kernel.org/linux-usb/40dfa45b-5f21-4eef-a8c1-51a2f320e267@rowland.harvard.edu/ Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/29855215-52f5-4385-b058-91f42c2bee18@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bjoto pushed a commit
that referenced
this pull request
Jun 27, 2024
Luis has been reporting an assert failure when freeing an inode cluster during inode inactivation for a while. The assert looks like: XFS: Assertion failed: bp->b_flags & XBF_DONE, file: fs/xfs/xfs_trans_buf.c, line: 241 ------------[ cut here ]------------ kernel BUG at fs/xfs/xfs_message.c:102! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 4 PID: 73 Comm: kworker/4:1 Not tainted 6.10.0-rc1 #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: xfs-inodegc/loop5 xfs_inodegc_worker [xfs] RIP: 0010:assfail (fs/xfs/xfs_message.c:102) xfs RSP: 0018:ffff88810188f7f0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff88816e748250 RCX: 1ffffffff844b0e7 RDX: 0000000000000004 RSI: ffff88810188f558 RDI: ffffffffc2431fa0 RBP: 1ffff11020311f01 R08: 0000000042431f9f R09: ffffed1020311e9b R10: ffff88810188f4df R11: ffffffffac725d70 R12: ffff88817a3f4000 R13: ffff88812182f000 R14: ffff88810188f998 R15: ffffffffc2423f80 FS: 0000000000000000(0000) GS:ffff8881c8400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055fe9d0f109c CR3: 000000014426c002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> xfs_trans_read_buf_map (fs/xfs/xfs_trans_buf.c:241 (discriminator 1)) xfs xfs_imap_to_bp (fs/xfs/xfs_trans.h:210 fs/xfs/libxfs/xfs_inode_buf.c:138) xfs xfs_inode_item_precommit (fs/xfs/xfs_inode_item.c:145) xfs xfs_trans_run_precommits (fs/xfs/xfs_trans.c:931) xfs __xfs_trans_commit (fs/xfs/xfs_trans.c:966) xfs xfs_inactive_ifree (fs/xfs/xfs_inode.c:1811) xfs xfs_inactive (fs/xfs/xfs_inode.c:2013) xfs xfs_inodegc_worker (fs/xfs/xfs_icache.c:1841 fs/xfs/xfs_icache.c:1886) xfs process_one_work (kernel/workqueue.c:3231) worker_thread (kernel/workqueue.c:3306 (discriminator 2) kernel/workqueue.c:3393 (discriminator 2)) kthread (kernel/kthread.c:389) ret_from_fork (arch/x86/kernel/process.c:147) ret_from_fork_asm (arch/x86/entry/entry_64.S:257) </TASK> And occurs when the the inode precommit handlers is attempt to look up the inode cluster buffer to attach the inode for writeback. The trail of logic that I can reconstruct is as follows. 1. the inode is clean when inodegc runs, so it is not attached to a cluster buffer when precommit runs. 2. #1 implies the inode cluster buffer may be clean and not pinned by dirty inodes when inodegc runs. 3. #2 implies that the inode cluster buffer can be reclaimed by memory pressure at any time. 4. The assert failure implies that the cluster buffer was attached to the transaction, but not marked done. It had been accessed earlier in the transaction, but not marked done. 5. #4 implies the cluster buffer has been invalidated (i.e. marked stale). 6. #5 implies that the inode cluster buffer was instantiated uninitialised in the transaction in xfs_ifree_cluster(), which only instantiates the buffers to invalidate them and never marks them as done. Given factors 1-3, this issue is highly dependent on timing and environmental factors. Hence the issue can be very difficult to reproduce in some situations, but highly reliable in others. Luis has an environment where it can be reproduced easily by g/531 but, OTOH, I've reproduced it only once in ~2000 cycles of g/531. I think the fix is to have xfs_ifree_cluster() set the XBF_DONE flag on the cluster buffers, even though they may not be initialised. The reasons why I think this is safe are: 1. A buffer cache lookup hit on a XBF_STALE buffer will clear the XBF_DONE flag. Hence all future users of the buffer know they have to re-initialise the contents before use and mark it done themselves. 2. xfs_trans_binval() sets the XFS_BLI_STALE flag, which means the buffer remains locked until the journal commit completes and the buffer is unpinned. Hence once marked XBF_STALE/XFS_BLI_STALE by xfs_ifree_cluster(), the only context that can access the freed buffer is the currently running transaction. 3. #2 implies that future buffer lookups in the currently running transaction will hit the transaction match code and not the buffer cache. Hence XBF_STALE and XFS_BLI_STALE will not be cleared unless the transaction initialises and logs the buffer with valid contents again. At which point, the buffer will be marked marked XBF_DONE again, so having XBF_DONE already set on the stale buffer is a moot point. 4. #2 also implies that any concurrent access to that cluster buffer will block waiting on the buffer lock until the inode cluster has been fully freed and is no longer an active inode cluster buffer. 5. #4 + #1 means that any future user of the disk range of that buffer will always see the range of disk blocks covered by the cluster buffer as not done, and hence must initialise the contents themselves. 6. Setting XBF_DONE in xfs_ifree_cluster() then means the unlinked inode precommit code will see a XBF_DONE buffer from the transaction match as it expects. It can then attach the stale but newly dirtied inode to the stale but newly dirtied cluster buffer without unexpected failures. The stale buffer will then sail through the journal and do the right thing with the attached stale inode during unpin. Hence the fix is just one line of extra code. The explanation of why we have to set XBF_DONE in xfs_ifree_cluster, OTOH, is long and complex.... Fixes: 82842fe ("xfs: fix AGF vs inode cluster buffer deadlock") Signed-off-by: Dave Chinner <dchinner@redhat.com> Tested-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
bjoto pushed a commit
that referenced
this pull request
Jun 27, 2024
It is possible to trigger a use-after-free by: * attaching an fentry probe to __sock_release() and the probe calling the bpf_get_socket_cookie() helper * running traceroute -I 1.1.1.1 on a freshly booted VM A KASAN enabled kernel will log something like below (decoded and stripped): ================================================================== BUG: KASAN: slab-use-after-free in __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) Read of size 8 at addr ffff888007110dd8 by task traceroute/299 CPU: 2 PID: 299 Comm: traceroute Tainted: G E 6.10.0-rc2+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117 (discriminator 1)) print_report (mm/kasan/report.c:378 mm/kasan/report.c:488) ? __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) kasan_report (mm/kasan/report.c:603) ? __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) kasan_check_range (mm/kasan/generic.c:183 mm/kasan/generic.c:189) __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) bpf_get_socket_ptr_cookie (./arch/x86/include/asm/preempt.h:94 ./include/linux/sock_diag.h:42 net/core/filter.c:5094 net/core/filter.c:5092) bpf_prog_875642cf11f1d139___sock_release+0x6e/0x8e bpf_trampoline_6442506592+0x47/0xaf __sock_release (net/socket.c:652) __sock_create (net/socket.c:1601) ... Allocated by task 299 on cpu 2 at 78.328492s: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:68) __kasan_slab_alloc (mm/kasan/common.c:312 mm/kasan/common.c:338) kmem_cache_alloc_noprof (mm/slub.c:3941 mm/slub.c:4000 mm/slub.c:4007) sk_prot_alloc (net/core/sock.c:2075) sk_alloc (net/core/sock.c:2134) inet_create (net/ipv4/af_inet.c:327 net/ipv4/af_inet.c:252) __sock_create (net/socket.c:1572) __sys_socket (net/socket.c:1660 net/socket.c:1644 net/socket.c:1706) __x64_sys_socket (net/socket.c:1718) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Freed by task 299 on cpu 2 at 78.328502s: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:68) kasan_save_free_info (mm/kasan/generic.c:582) poison_slab_object (mm/kasan/common.c:242) __kasan_slab_free (mm/kasan/common.c:256) kmem_cache_free (mm/slub.c:4437 mm/slub.c:4511) __sk_destruct (net/core/sock.c:2117 net/core/sock.c:2208) inet_create (net/ipv4/af_inet.c:397 net/ipv4/af_inet.c:252) __sock_create (net/socket.c:1572) __sys_socket (net/socket.c:1660 net/socket.c:1644 net/socket.c:1706) __x64_sys_socket (net/socket.c:1718) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Fix this by clearing the struct socket reference in sk_common_release() to cover all protocol families create functions, which may already attached the reference to the sk object with sock_init_data(). Fixes: c5dbb89 ("bpf: Expose bpf_get_socket_cookie to tracing programs") Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/netdev/20240613194047.36478-1-kuniyu@amazon.com/T/ Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: D. Wythe <alibuda@linux.alibaba.com> Link: https://lore.kernel.org/r/20240617210205.67311-1-ignat@cloudflare.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
bjoto pushed a commit
that referenced
this pull request
Jun 27, 2024
…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 fixes the suspicious RCU usage warning that resulted from the recent fix for the race between namespace cleanup and gc in ipset left out checking the pernet exit phase when calling rcu_dereference_protected(), from Jozsef Kadlecsik. Patch #2 fixes incorrect input and output netdevice in SRv6 prerouting hooks, from Jianguo Wu. Patch #3 moves nf_hooks_lwtunnel sysctl toggle to the netfilter core. The connection tracking system is loaded on-demand, this ensures availability of this knob regardless. Patch #4-#5 adds selftests for SRv6 netfilter hooks also from Jianguo Wu. netfilter pull request 24-06-19 * tag 'nf-24-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: selftests: add selftest for the SRv6 End.DX6 behavior with netfilter selftests: add selftest for the SRv6 End.DX4 behavior with netfilter netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors netfilter: ipset: Fix suspicious rcu_dereference_protected() ==================== Link: https://lore.kernel.org/r/20240619170537.2846-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
bjoto pushed a commit
that referenced
this pull request
Jun 27, 2024
…/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.10, take #2 - Fix dangling references to a redistributor region if the vgic was prematurely destroyed. - Properly mark FFA buffers as released, ensuring that both parties can make forward progress.
bjoto pushed a commit
that referenced
this pull request
Jun 27, 2024
into HEAD KVM/riscv fixes for 6.10, take #2 - Fix compilation for KVM selftests
bjoto pushed a commit
that referenced
this pull request
Jun 27, 2024
The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/20240617095543.6971-1-jack@suse.cz Link: https://lkml.kernel.org/r/20240614145243.8837-1-jack@suse.cz Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
bjoto pushed a commit
that referenced
this pull request
Jul 1, 2024
syzbot reported a lockdep violation involving bridge driver [1]
Make sure netdev_rename_lock is softirq safe to fix this issue.
[1]
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
6.10.0-rc2-syzkaller-00249-gbe27b8965297 #0 Not tainted
-----------------------------------------------------
syz-executor.2/9449 [HC0[0]:SC0[2]:HE0:SE0] is trying to acquire:
ffffffff8f5de668 (netdev_rename_lock.seqcount){+.+.}-{0:0}, at: rtnl_fill_ifinfo+0x38e/0x2270 net/core/rtnetlink.c:1839
and this task is already holding:
ffff888060c64cb8 (&br->lock){+.-.}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline]
ffff888060c64cb8 (&br->lock){+.-.}-{2:2}, at: br_port_slave_changelink+0x3d/0x150 net/bridge/br_netlink.c:1212
which would create a new lock dependency:
(&br->lock){+.-.}-{2:2} -> (netdev_rename_lock.seqcount){+.+.}-{0:0}
but this new dependency connects a SOFTIRQ-irq-safe lock:
(&br->lock){+.-.}-{2:2}
... which became SOFTIRQ-irq-safe at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
__raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
_raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
spin_lock include/linux/spinlock.h:351 [inline]
br_forward_delay_timer_expired+0x50/0x440 net/bridge/br_stp_timer.c:86
call_timer_fn+0x18e/0x650 kernel/time/timer.c:1792
expire_timers kernel/time/timer.c:1843 [inline]
__run_timers kernel/time/timer.c:2417 [inline]
__run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2428
run_timer_base kernel/time/timer.c:2437 [inline]
run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2447
handle_softirqs+0x2c4/0x970 kernel/softirq.c:554
__do_softirq kernel/softirq.c:588 [inline]
invoke_softirq kernel/softirq.c:428 [inline]
__irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637
irq_exit_rcu+0x9/0x30 kernel/softirq.c:649
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702
lock_acquire+0x264/0x550 kernel/locking/lockdep.c:5758
fs_reclaim_acquire+0xaf/0x140 mm/page_alloc.c:3800
might_alloc include/linux/sched/mm.h:334 [inline]
slab_pre_alloc_hook mm/slub.c:3890 [inline]
slab_alloc_node mm/slub.c:3980 [inline]
kmalloc_trace_noprof+0x3d/0x2c0 mm/slub.c:4147
kmalloc_noprof include/linux/slab.h:660 [inline]
kzalloc_noprof include/linux/slab.h:778 [inline]
class_dir_create_and_add drivers/base/core.c:3255 [inline]
get_device_parent+0x2a7/0x410 drivers/base/core.c:3315
device_add+0x325/0xbf0 drivers/base/core.c:3645
netdev_register_kobject+0x17e/0x320 net/core/net-sysfs.c:2136
register_netdevice+0x11d5/0x19e0 net/core/dev.c:10375
nsim_init_netdevsim drivers/net/netdevsim/netdev.c:690 [inline]
nsim_create+0x647/0x890 drivers/net/netdevsim/netdev.c:750
__nsim_dev_port_add+0x6c0/0xae0 drivers/net/netdevsim/dev.c:1390
nsim_dev_port_add_all drivers/net/netdevsim/dev.c:1446 [inline]
nsim_dev_reload_create drivers/net/netdevsim/dev.c:1498 [inline]
nsim_dev_reload_up+0x69b/0x8e0 drivers/net/netdevsim/dev.c:985
devlink_reload+0x478/0x870 net/devlink/dev.c:474
devlink_nl_reload_doit+0xbd6/0xe50 net/devlink/dev.c:586
genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0xb14/0xec0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2585
___sys_sendmsg net/socket.c:2639 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2668
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
to a SOFTIRQ-irq-unsafe lock:
(netdev_rename_lock.seqcount){+.+.}-{0:0}
... which became SOFTIRQ-irq-unsafe at:
...
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
do_write_seqcount_begin_nested include/linux/seqlock.h:469 [inline]
do_write_seqcount_begin include/linux/seqlock.h:495 [inline]
write_seqlock include/linux/seqlock.h:823 [inline]
dev_change_name+0x184/0x920 net/core/dev.c:1229
do_setlink+0xa4b/0x41f0 net/core/rtnetlink.c:2880
__rtnl_newlink net/core/rtnetlink.c:3696 [inline]
rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3743
rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
__sys_sendto+0x3a4/0x4f0 net/socket.c:2192
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0xde/0x100 net/socket.c:2200
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(netdev_rename_lock.seqcount);
local_irq_disable();
lock(&br->lock);
lock(netdev_rename_lock.seqcount);
<Interrupt>
lock(&br->lock);
*** DEADLOCK ***
3 locks held by syz-executor.2/9449:
#0: ffffffff8f5e7448 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock net/core/rtnetlink.c:79 [inline]
#0: ffffffff8f5e7448 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x842/0x1180 net/core/rtnetlink.c:6632
#1: ffff888060c64cb8 (&br->lock){+.-.}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline]
#1: ffff888060c64cb8 (&br->lock){+.-.}-{2:2}, at: br_port_slave_changelink+0x3d/0x150 net/bridge/br_netlink.c:1212
#2: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:329 [inline]
#2: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:781 [inline]
#2: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: team_change_rx_flags+0x29/0x330 drivers/net/team/team_core.c:1767
the dependencies between SOFTIRQ-irq-safe lock and the holding lock:
-> (&br->lock){+.-.}-{2:2} {
HARDIRQ-ON-W at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline]
_raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178
spin_lock_bh include/linux/spinlock.h:356 [inline]
br_add_if+0xb34/0xef0 net/bridge/br_if.c:682
do_set_master net/core/rtnetlink.c:2701 [inline]
do_setlink+0xe70/0x41f0 net/core/rtnetlink.c:2907
__rtnl_newlink net/core/rtnetlink.c:3696 [inline]
rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3743
rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
__sys_sendto+0x3a4/0x4f0 net/socket.c:2192
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0xde/0x100 net/socket.c:2200
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
IN-SOFTIRQ-W at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
__raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
_raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
spin_lock include/linux/spinlock.h:351 [inline]
br_forward_delay_timer_expired+0x50/0x440 net/bridge/br_stp_timer.c:86
call_timer_fn+0x18e/0x650 kernel/time/timer.c:1792
expire_timers kernel/time/timer.c:1843 [inline]
__run_timers kernel/time/timer.c:2417 [inline]
__run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2428
run_timer_base kernel/time/timer.c:2437 [inline]
run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2447
handle_softirqs+0x2c4/0x970 kernel/softirq.c:554
__do_softirq kernel/softirq.c:588 [inline]
invoke_softirq kernel/softirq.c:428 [inline]
__irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637
irq_exit_rcu+0x9/0x30 kernel/softirq.c:649
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702
lock_acquire+0x264/0x550 kernel/locking/lockdep.c:5758
fs_reclaim_acquire+0xaf/0x140 mm/page_alloc.c:3800
might_alloc include/linux/sched/mm.h:334 [inline]
slab_pre_alloc_hook mm/slub.c:3890 [inline]
slab_alloc_node mm/slub.c:3980 [inline]
kmalloc_trace_noprof+0x3d/0x2c0 mm/slub.c:4147
kmalloc_noprof include/linux/slab.h:660 [inline]
kzalloc_noprof include/linux/slab.h:778 [inline]
class_dir_create_and_add drivers/base/core.c:3255 [inline]
get_device_parent+0x2a7/0x410 drivers/base/core.c:3315
device_add+0x325/0xbf0 drivers/base/core.c:3645
netdev_register_kobject+0x17e/0x320 net/core/net-sysfs.c:2136
register_netdevice+0x11d5/0x19e0 net/core/dev.c:10375
nsim_init_netdevsim drivers/net/netdevsim/netdev.c:690 [inline]
nsim_create+0x647/0x890 drivers/net/netdevsim/netdev.c:750
__nsim_dev_port_add+0x6c0/0xae0 drivers/net/netdevsim/dev.c:1390
nsim_dev_port_add_all drivers/net/netdevsim/dev.c:1446 [inline]
nsim_dev_reload_create drivers/net/netdevsim/dev.c:1498 [inline]
nsim_dev_reload_up+0x69b/0x8e0 drivers/net/netdevsim/dev.c:985
devlink_reload+0x478/0x870 net/devlink/dev.c:474
devlink_nl_reload_doit+0xbd6/0xe50 net/devlink/dev.c:586
genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0xb14/0xec0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2585
___sys_sendmsg net/socket.c:2639 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2668
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
INITIAL USE at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline]
_raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178
spin_lock_bh include/linux/spinlock.h:356 [inline]
br_add_if+0xb34/0xef0 net/bridge/br_if.c:682
do_set_master net/core/rtnetlink.c:2701 [inline]
do_setlink+0xe70/0x41f0 net/core/rtnetlink.c:2907
__rtnl_newlink net/core/rtnetlink.c:3696 [inline]
rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3743
rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
__sys_sendto+0x3a4/0x4f0 net/socket.c:2192
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0xde/0x100 net/socket.c:2200
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
}
... key at: [<ffffffff94b9a1a0>] br_dev_setup.__key+0x0/0x20
the dependencies between the lock to be acquired
and SOFTIRQ-irq-unsafe lock:
-> (netdev_rename_lock.seqcount){+.+.}-{0:0} {
HARDIRQ-ON-W at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
do_write_seqcount_begin_nested include/linux/seqlock.h:469 [inline]
do_write_seqcount_begin include/linux/seqlock.h:495 [inline]
write_seqlock include/linux/seqlock.h:823 [inline]
dev_change_name+0x184/0x920 net/core/dev.c:1229
do_setlink+0xa4b/0x41f0 net/core/rtnetlink.c:2880
__rtnl_newlink net/core/rtnetlink.c:3696 [inline]
rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3743
rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
__sys_sendto+0x3a4/0x4f0 net/socket.c:2192
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0xde/0x100 net/socket.c:2200
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
SOFTIRQ-ON-W at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
do_write_seqcount_begin_nested include/linux/seqlock.h:469 [inline]
do_write_seqcount_begin include/linux/seqlock.h:495 [inline]
write_seqlock include/linux/seqlock.h:823 [inline]
dev_change_name+0x184/0x920 net/core/dev.c:1229
do_setlink+0xa4b/0x41f0 net/core/rtnetlink.c:2880
__rtnl_newlink net/core/rtnetlink.c:3696 [inline]
rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3743
rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
__sys_sendto+0x3a4/0x4f0 net/socket.c:2192
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0xde/0x100 net/socket.c:2200
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
INITIAL USE at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
do_write_seqcount_begin_nested include/linux/seqlock.h:469 [inline]
do_write_seqcount_begin include/linux/seqlock.h:495 [inline]
write_seqlock include/linux/seqlock.h:823 [inline]
dev_change_name+0x184/0x920 net/core/dev.c:1229
do_setlink+0xa4b/0x41f0 net/core/rtnetlink.c:2880
__rtnl_newlink net/core/rtnetlink.c:3696 [inline]
rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3743
rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
__sys_sendto+0x3a4/0x4f0 net/socket.c:2192
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0xde/0x100 net/socket.c:2200
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
INITIAL READ USE at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
seqcount_lockdep_reader_access include/linux/seqlock.h:72 [inline]
read_seqbegin include/linux/seqlock.h:772 [inline]
netdev_copy_name+0x168/0x2c0 net/core/dev.c:949
rtnl_fill_ifinfo+0x38e/0x2270 net/core/rtnetlink.c:1839
rtmsg_ifinfo_build_skb+0x18a/0x260 net/core/rtnetlink.c:4073
rtmsg_ifinfo_event net/core/rtnetlink.c:4107 [inline]
rtmsg_ifinfo+0x91/0x1b0 net/core/rtnetlink.c:4116
register_netdevice+0x1665/0x19e0 net/core/dev.c:10422
register_netdev+0x3b/0x50 net/core/dev.c:10512
loopback_net_init+0x73/0x150 drivers/net/loopback.c:217
ops_init+0x359/0x610 net/core/net_namespace.c:139
__register_pernet_operations net/core/net_namespace.c:1247 [inline]
register_pernet_operations+0x2cb/0x660 net/core/net_namespace.c:1320
register_pernet_device+0x33/0x80 net/core/net_namespace.c:1407
net_dev_init+0xfcd/0x10d0 net/core/dev.c:11956
do_one_initcall+0x248/0x880 init/main.c:1267
do_initcall_level+0x157/0x210 init/main.c:1329
do_initcalls+0x3f/0x80 init/main.c:1345
kernel_init_freeable+0x435/0x5d0 init/main.c:1578
kernel_init+0x1d/0x2b0 init/main.c:1467
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
}
... key at: [<ffffffff8f5de668>] netdev_rename_lock+0x8/0xa0
... acquired at:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
seqcount_lockdep_reader_access include/linux/seqlock.h:72 [inline]
read_seqbegin include/linux/seqlock.h:772 [inline]
netdev_copy_name+0x168/0x2c0 net/core/dev.c:949
rtnl_fill_ifinfo+0x38e/0x2270 net/core/rtnetlink.c:1839
rtmsg_ifinfo_build_skb+0x18a/0x260 net/core/rtnetlink.c:4073
rtmsg_ifinfo_event net/core/rtnetlink.c:4107 [inline]
rtmsg_ifinfo+0x91/0x1b0 net/core/rtnetlink.c:4116
__dev_notify_flags+0xf7/0x400 net/core/dev.c:8816
__dev_set_promiscuity+0x152/0x5a0 net/core/dev.c:8588
dev_set_promiscuity+0x51/0xe0 net/core/dev.c:8608
team_change_rx_flags+0x203/0x330 drivers/net/team/team_core.c:1771
dev_change_rx_flags net/core/dev.c:8541 [inline]
__dev_set_promiscuity+0x406/0x5a0 net/core/dev.c:8585
dev_set_promiscuity+0x51/0xe0 net/core/dev.c:8608
br_port_clear_promisc net/bridge/br_if.c:135 [inline]
br_manage_promisc+0x505/0x590 net/bridge/br_if.c:172
nbp_update_port_count net/bridge/br_if.c:242 [inline]
br_port_flags_change+0x161/0x1f0 net/bridge/br_if.c:761
br_setport+0xcb5/0x16d0 net/bridge/br_netlink.c:1000
br_port_slave_changelink+0x135/0x150 net/bridge/br_netlink.c:1213
__rtnl_newlink net/core/rtnetlink.c:3689 [inline]
rtnl_newlink+0x169f/0x20a0 net/core/rtnetlink.c:3743
rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2585
___sys_sendmsg net/socket.c:2639 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2668
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
stack backtrace:
CPU: 0 PID: 9449 Comm: syz-executor.2 Not tainted 6.10.0-rc2-syzkaller-00249-gbe27b8965297 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
print_bad_irq_dependency kernel/locking/lockdep.c:2626 [inline]
check_irq_usage kernel/locking/lockdep.c:2865 [inline]
check_prev_add kernel/locking/lockdep.c:3138 [inline]
check_prevs_add kernel/locking/lockdep.c:3253 [inline]
validate_chain+0x4de0/0x5900 kernel/locking/lockdep.c:3869
__lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
seqcount_lockdep_reader_access include/linux/seqlock.h:72 [inline]
read_seqbegin include/linux/seqlock.h:772 [inline]
netdev_copy_name+0x168/0x2c0 net/core/dev.c:949
rtnl_fill_ifinfo+0x38e/0x2270 net/core/rtnetlink.c:1839
rtmsg_ifinfo_build_skb+0x18a/0x260 net/core/rtnetlink.c:4073
rtmsg_ifinfo_event net/core/rtnetlink.c:4107 [inline]
rtmsg_ifinfo+0x91/0x1b0 net/core/rtnetlink.c:4116
__dev_notify_flags+0xf7/0x400 net/core/dev.c:8816
__dev_set_promiscuity+0x152/0x5a0 net/core/dev.c:8588
dev_set_promiscuity+0x51/0xe0 net/core/dev.c:8608
team_change_rx_flags+0x203/0x330 drivers/net/team/team_core.c:1771
dev_change_rx_flags net/core/dev.c:8541 [inline]
__dev_set_promiscuity+0x406/0x5a0 net/core/dev.c:8585
dev_set_promiscuity+0x51/0xe0 net/core/dev.c:8608
br_port_clear_promisc net/bridge/br_if.c:135 [inline]
br_manage_promisc+0x505/0x590 net/bridge/br_if.c:172
nbp_update_port_count net/bridge/br_if.c:242 [inline]
br_port_flags_change+0x161/0x1f0 net/bridge/br_if.c:761
br_setport+0xcb5/0x16d0 net/bridge/br_netlink.c:1000
br_port_slave_changelink+0x135/0x150 net/bridge/br_netlink.c:1213
__rtnl_newlink net/core/rtnetlink.c:3689 [inline]
rtnl_newlink+0x169f/0x20a0 net/core/rtnetlink.c:3743
rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2585
___sys_sendmsg net/socket.c:2639 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2668
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f3b3047cf29
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f3b311740c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f3b305b4050 RCX: 00007f3b3047cf29
RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000008
RBP: 00007f3b304ec074 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000006e R14: 00007f3b305b4050 R15: 00007ffca2f3dc68
</TASK>
Fixes: 0840556 ("net: Protect dev->name by seqlock.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>bjoto pushed a commit
that referenced
this pull request
Jul 1, 2024
…play
During inode logging (and log replay too), we are holding a transaction
handle and we often need to call btrfs_iget(), which will read an inode
from its subvolume btree if it's not loaded in memory and that results in
allocating an inode with GFP_KERNEL semantics at the btrfs_alloc_inode()
callback - and this may recurse into the filesystem in case we are under
memory pressure and attempt to commit the current transaction, resulting
in a deadlock since the logging (or log replay) task is holding a
transaction handle open.
Syzbot reported this with the following stack traces:
WARNING: possible circular locking dependency detected
6.10.0-rc2-syzkaller-00361-g061d1af7b030 #0 Not tainted
------------------------------------------------------
syz-executor.1/9919 is trying to acquire lock:
ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: might_alloc include/linux/sched/mm.h:334 [inline]
ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: slab_pre_alloc_hook mm/slub.c:3891 [inline]
ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: slab_alloc_node mm/slub.c:3981 [inline]
ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020
but task is already holding lock:
ffff88804b569358 (&ei->log_mutex){+.+.}-{3:3}, at: btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&ei->log_mutex){+.+.}-{3:3}:
__mutex_lock_common kernel/locking/mutex.c:608 [inline]
__mutex_lock+0x175/0x9c0 kernel/locking/mutex.c:752
btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481
btrfs_log_inode_parent+0x8cb/0x2a90 fs/btrfs/tree-log.c:7079
btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180
btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959
vfs_fsync_range+0x141/0x230 fs/sync.c:188
generic_write_sync include/linux/fs.h:2794 [inline]
btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705
new_sync_write fs/read_write.c:497 [inline]
vfs_write+0x6b6/0x1140 fs/read_write.c:590
ksys_write+0x12f/0x260 fs/read_write.c:643
do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
__do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386
do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
-> #2 (btrfs_trans_num_extwriters){++++}-{0:0}:
join_transaction+0x164/0xf40 fs/btrfs/transaction.c:315
start_transaction+0x427/0x1a70 fs/btrfs/transaction.c:700
btrfs_commit_super+0xa1/0x110 fs/btrfs/disk-io.c:4170
close_ctree+0xcb0/0xf90 fs/btrfs/disk-io.c:4324
generic_shutdown_super+0x159/0x3d0 fs/super.c:642
kill_anon_super+0x3a/0x60 fs/super.c:1226
btrfs_kill_super+0x3b/0x50 fs/btrfs/super.c:2096
deactivate_locked_super+0xbe/0x1a0 fs/super.c:473
deactivate_super+0xde/0x100 fs/super.c:506
cleanup_mnt+0x222/0x450 fs/namespace.c:1267
task_work_run+0x14e/0x250 kernel/task_work.c:180
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop kernel/entry/common.c:114 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0x278/0x2a0 kernel/entry/common.c:218
__do_fast_syscall_32+0x80/0x120 arch/x86/entry/common.c:389
do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
-> #1 (btrfs_trans_num_writers){++++}-{0:0}:
__lock_release kernel/locking/lockdep.c:5468 [inline]
lock_release+0x33e/0x6c0 kernel/locking/lockdep.c:5774
percpu_up_read include/linux/percpu-rwsem.h:99 [inline]
__sb_end_write include/linux/fs.h:1650 [inline]
sb_end_intwrite include/linux/fs.h:1767 [inline]
__btrfs_end_transaction+0x5ca/0x920 fs/btrfs/transaction.c:1071
btrfs_commit_inode_delayed_inode+0x228/0x330 fs/btrfs/delayed-inode.c:1301
btrfs_evict_inode+0x960/0xe80 fs/btrfs/inode.c:5291
evict+0x2ed/0x6c0 fs/inode.c:667
iput_final fs/inode.c:1741 [inline]
iput.part.0+0x5a8/0x7f0 fs/inode.c:1767
iput+0x5c/0x80 fs/inode.c:1757
dentry_unlink_inode+0x295/0x480 fs/dcache.c:400
__dentry_kill+0x1d0/0x600 fs/dcache.c:603
dput.part.0+0x4b1/0x9b0 fs/dcache.c:845
dput+0x1f/0x30 fs/dcache.c:835
ovl_stack_put+0x60/0x90 fs/overlayfs/util.c:132
ovl_destroy_inode+0xc6/0x190 fs/overlayfs/super.c:182
destroy_inode+0xc4/0x1b0 fs/inode.c:311
iput_final fs/inode.c:1741 [inline]
iput.part.0+0x5a8/0x7f0 fs/inode.c:1767
iput+0x5c/0x80 fs/inode.c:1757
dentry_unlink_inode+0x295/0x480 fs/dcache.c:400
__dentry_kill+0x1d0/0x600 fs/dcache.c:603
shrink_kill fs/dcache.c:1048 [inline]
shrink_dentry_list+0x140/0x5d0 fs/dcache.c:1075
prune_dcache_sb+0xeb/0x150 fs/dcache.c:1156
super_cache_scan+0x32a/0x550 fs/super.c:221
do_shrink_slab+0x44f/0x11c0 mm/shrinker.c:435
shrink_slab_memcg mm/shrinker.c:548 [inline]
shrink_slab+0xa87/0x1310 mm/shrinker.c:626
shrink_one+0x493/0x7c0 mm/vmscan.c:4790
shrink_many mm/vmscan.c:4851 [inline]
lru_gen_shrink_node+0x89f/0x1750 mm/vmscan.c:4951
shrink_node mm/vmscan.c:5910 [inline]
kswapd_shrink_node mm/vmscan.c:6720 [inline]
balance_pgdat+0x1105/0x1970 mm/vmscan.c:6911
kswapd+0x5ea/0xbf0 mm/vmscan.c:7180
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
-> #0 (fs_reclaim){+.+.}-{0:0}:
check_prev_add kernel/locking/lockdep.c:3134 [inline]
check_prevs_add kernel/locking/lockdep.c:3253 [inline]
validate_chain kernel/locking/lockdep.c:3869 [inline]
__lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137
lock_acquire kernel/locking/lockdep.c:5754 [inline]
lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719
__fs_reclaim_acquire mm/page_alloc.c:3801 [inline]
fs_reclaim_acquire+0x102/0x160 mm/page_alloc.c:3815
might_alloc include/linux/sched/mm.h:334 [inline]
slab_pre_alloc_hook mm/slub.c:3891 [inline]
slab_alloc_node mm/slub.c:3981 [inline]
kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020
btrfs_alloc_inode+0x118/0xb20 fs/btrfs/inode.c:8411
alloc_inode+0x5d/0x230 fs/inode.c:261
iget5_locked fs/inode.c:1235 [inline]
iget5_locked+0x1c9/0x2c0 fs/inode.c:1228
btrfs_iget_locked fs/btrfs/inode.c:5590 [inline]
btrfs_iget_path fs/btrfs/inode.c:5607 [inline]
btrfs_iget+0xfb/0x230 fs/btrfs/inode.c:5636
add_conflicting_inode fs/btrfs/tree-log.c:5657 [inline]
copy_inode_items_to_log+0x1039/0x1e30 fs/btrfs/tree-log.c:5928
btrfs_log_inode+0xa48/0x4660 fs/btrfs/tree-log.c:6592
log_new_delayed_dentries fs/btrfs/tree-log.c:6363 [inline]
btrfs_log_inode+0x27dd/0x4660 fs/btrfs/tree-log.c:6718
btrfs_log_all_parents fs/btrfs/tree-log.c:6833 [inline]
btrfs_log_inode_parent+0x22ba/0x2a90 fs/btrfs/tree-log.c:7141
btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180
btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959
vfs_fsync_range+0x141/0x230 fs/sync.c:188
generic_write_sync include/linux/fs.h:2794 [inline]
btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705
do_iter_readv_writev+0x504/0x780 fs/read_write.c:741
vfs_writev+0x36f/0xde0 fs/read_write.c:971
do_pwritev+0x1b2/0x260 fs/read_write.c:1072
__do_compat_sys_pwritev2 fs/read_write.c:1218 [inline]
__se_compat_sys_pwritev2 fs/read_write.c:1210 [inline]
__ia32_compat_sys_pwritev2+0x121/0x1b0 fs/read_write.c:1210
do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
__do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386
do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
other info that might help us debug this:
Chain exists of:
fs_reclaim --> btrfs_trans_num_extwriters --> &ei->log_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ei->log_mutex);
lock(btrfs_trans_num_extwriters);
lock(&ei->log_mutex);
lock(fs_reclaim);
*** DEADLOCK ***
7 locks held by syz-executor.1/9919:
#0: ffff88802be20420 (sb_writers#23){.+.+}-{0:0}, at: do_pwritev+0x1b2/0x260 fs/read_write.c:1072
#1: ffff888065c0f8f0 (&sb->s_type->i_mutex_key#33){++++}-{3:3}, at: inode_lock include/linux/fs.h:791 [inline]
#1: ffff888065c0f8f0 (&sb->s_type->i_mutex_key#33){++++}-{3:3}, at: btrfs_inode_lock+0xc8/0x110 fs/btrfs/inode.c:385
#2: ffff888065c0f778 (&ei->i_mmap_lock){++++}-{3:3}, at: btrfs_inode_lock+0xee/0x110 fs/btrfs/inode.c:388
#3: ffff88802be20610 (sb_internal#4){.+.+}-{0:0}, at: btrfs_sync_file+0x95b/0xe10 fs/btrfs/file.c:1952
#4: ffff8880546323f0 (btrfs_trans_num_writers){++++}-{0:0}, at: join_transaction+0x430/0xf40 fs/btrfs/transaction.c:290
#5: ffff888054632418 (btrfs_trans_num_extwriters){++++}-{0:0}, at: join_transaction+0x430/0xf40 fs/btrfs/transaction.c:290
#6: ffff88804b569358 (&ei->log_mutex){+.+.}-{3:3}, at: btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481
stack backtrace:
CPU: 2 PID: 9919 Comm: syz-executor.1 Not tainted 6.10.0-rc2-syzkaller-00361-g061d1af7b030 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114
check_noncircular+0x31a/0x400 kernel/locking/lockdep.c:2187
check_prev_add kernel/locking/lockdep.c:3134 [inline]
check_prevs_add kernel/locking/lockdep.c:3253 [inline]
validate_chain kernel/locking/lockdep.c:3869 [inline]
__lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137
lock_acquire kernel/locking/lockdep.c:5754 [inline]
lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719
__fs_reclaim_acquire mm/page_alloc.c:3801 [inline]
fs_reclaim_acquire+0x102/0x160 mm/page_alloc.c:3815
might_alloc include/linux/sched/mm.h:334 [inline]
slab_pre_alloc_hook mm/slub.c:3891 [inline]
slab_alloc_node mm/slub.c:3981 [inline]
kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020
btrfs_alloc_inode+0x118/0xb20 fs/btrfs/inode.c:8411
alloc_inode+0x5d/0x230 fs/inode.c:261
iget5_locked fs/inode.c:1235 [inline]
iget5_locked+0x1c9/0x2c0 fs/inode.c:1228
btrfs_iget_locked fs/btrfs/inode.c:5590 [inline]
btrfs_iget_path fs/btrfs/inode.c:5607 [inline]
btrfs_iget+0xfb/0x230 fs/btrfs/inode.c:5636
add_conflicting_inode fs/btrfs/tree-log.c:5657 [inline]
copy_inode_items_to_log+0x1039/0x1e30 fs/btrfs/tree-log.c:5928
btrfs_log_inode+0xa48/0x4660 fs/btrfs/tree-log.c:6592
log_new_delayed_dentries fs/btrfs/tree-log.c:6363 [inline]
btrfs_log_inode+0x27dd/0x4660 fs/btrfs/tree-log.c:6718
btrfs_log_all_parents fs/btrfs/tree-log.c:6833 [inline]
btrfs_log_inode_parent+0x22ba/0x2a90 fs/btrfs/tree-log.c:7141
btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180
btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959
vfs_fsync_range+0x141/0x230 fs/sync.c:188
generic_write_sync include/linux/fs.h:2794 [inline]
btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705
do_iter_readv_writev+0x504/0x780 fs/read_write.c:741
vfs_writev+0x36f/0xde0 fs/read_write.c:971
do_pwritev+0x1b2/0x260 fs/read_write.c:1072
__do_compat_sys_pwritev2 fs/read_write.c:1218 [inline]
__se_compat_sys_pwritev2 fs/read_write.c:1210 [inline]
__ia32_compat_sys_pwritev2+0x121/0x1b0 fs/read_write.c:1210
do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
__do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386
do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
RIP: 0023:0xf7334579
Code: b8 01 10 06 03 (...)
RSP: 002b:00000000f5f265ac EFLAGS: 00000292 ORIG_RAX: 000000000000017b
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00000000200002c0
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000292 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
Fix this by ensuring we are under a NOFS scope whenever we call
btrfs_iget() during inode logging and log replay.
Reported-by: syzbot+8576cfa84070dce4d59b@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/000000000000274a3a061abbd928@google.com/
Fixes: 712e36c ("btrfs: use GFP_KERNEL in btrfs_alloc_inode")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>bjoto pushed a commit
that referenced
this pull request
Jul 1, 2024
…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains two Netfilter fixes for net: Patch #1 fixes CONFIG_SYSCTL=n for a patch coming in the previous PR to move the sysctl toggle to enable SRv6 netfilter hooks from nf_conntrack to the core, from Jianguo Wu. Patch #2 fixes a possible pointer leak to userspace due to insufficient validation of NFT_DATA_VALUE. Linus found this pointer leak to userspace via zdi-disclosures@ and forwarded the notice to Netfilter maintainers, he appears as reporter because whoever found this issue never approached Netfilter maintainers neither via security@ nor in private. netfilter pull request 24-06-27 * tag 'nf-24-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers netfilter: fix undefined reference to 'netfilter_lwtunnel_*' when CONFIG_SYSCTL=n ==================== Link: https://patch.msgid.link/20240626233845.151197-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
bjoto pushed a commit
that referenced
this pull request
Mar 17, 2025
Use raw_spinlock in order to fix spurious messages about invalid context
when spinlock debugging is enabled. The lock is only used to serialize
register access.
[ 4.239592] =============================
[ 4.239595] [ BUG: Invalid wait context ]
[ 4.239599] 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 Not tainted
[ 4.239603] -----------------------------
[ 4.239606] kworker/u8:5/76 is trying to lock:
[ 4.239609] ffff0000091898a0 (&p->lock){....}-{3:3}, at: gpio_rcar_config_interrupt_input_mode+0x34/0x164
[ 4.239641] other info that might help us debug this:
[ 4.239643] context-{5:5}
[ 4.239646] 5 locks held by kworker/u8:5/76:
[ 4.239651] #0: ffff0000080fb148 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x190/0x62c
[ 4.250180] OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'frame-master' with a value.
[ 4.254094] #1: ffff80008299bd80 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1b8/0x62c
[ 4.254109] #2: ffff00000920c8f8
[ 4.258345] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'bitclock-master' with a value.
[ 4.264803] (&dev->mutex){....}-{4:4}, at: __device_attach_async_helper+0x3c/0xdc
[ 4.264820] #3: ffff00000a50ca40 (request_class#2){+.+.}-{4:4}, at: __setup_irq+0xa0/0x690
[ 4.264840] #4:
[ 4.268872] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'frame-master' with a value.
[ 4.273275] ffff00000a50c8c8 (lock_class){....}-{2:2}, at: __setup_irq+0xc4/0x690
[ 4.296130] renesas_sdhi_internal_dmac ee10000.mmc: mmc1 base at 0x00000000ee100000, max clock rate 200 MHz
[ 4.304082] stack backtrace:
[ 4.304086] CPU: 1 UID: 0 PID: 76 Comm: kworker/u8:5 Not tainted 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35
[ 4.304092] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT)
[ 4.304097] Workqueue: async async_run_entry_fn
[ 4.304106] Call trace:
[ 4.304110] show_stack+0x14/0x20 (C)
[ 4.304122] dump_stack_lvl+0x6c/0x90
[ 4.304131] dump_stack+0x14/0x1c
[ 4.304138] __lock_acquire+0xdfc/0x1584
[ 4.426274] lock_acquire+0x1c4/0x33c
[ 4.429942] _raw_spin_lock_irqsave+0x5c/0x80
[ 4.434307] gpio_rcar_config_interrupt_input_mode+0x34/0x164
[ 4.440061] gpio_rcar_irq_set_type+0xd4/0xd8
[ 4.444422] __irq_set_trigger+0x5c/0x178
[ 4.448435] __setup_irq+0x2e4/0x690
[ 4.452012] request_threaded_irq+0xc4/0x190
[ 4.456285] devm_request_threaded_irq+0x7c/0xf4
[ 4.459398] ata1: link resume succeeded after 1 retries
[ 4.460902] mmc_gpiod_request_cd_irq+0x68/0xe0
[ 4.470660] mmc_start_host+0x50/0xac
[ 4.474327] mmc_add_host+0x80/0xe4
[ 4.477817] tmio_mmc_host_probe+0x2b0/0x440
[ 4.482094] renesas_sdhi_probe+0x488/0x6f4
[ 4.486281] renesas_sdhi_internal_dmac_probe+0x60/0x78
[ 4.491509] platform_probe+0x64/0xd8
[ 4.495178] really_probe+0xb8/0x2a8
[ 4.498756] __driver_probe_device+0x74/0x118
[ 4.503116] driver_probe_device+0x3c/0x154
[ 4.507303] __device_attach_driver+0xd4/0x160
[ 4.511750] bus_for_each_drv+0x84/0xe0
[ 4.515588] __device_attach_async_helper+0xb0/0xdc
[ 4.520470] async_run_entry_fn+0x30/0xd8
[ 4.524481] process_one_work+0x210/0x62c
[ 4.528494] worker_thread+0x1ac/0x340
[ 4.532245] kthread+0x10c/0x110
[ 4.535476] ret_from_fork+0x10/0x20
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250121135833.3769310-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>bjoto pushed a commit
that referenced
this pull request
Mar 17, 2025
…cal section
A circular lock dependency splat has been seen involving down_trylock():
======================================================
WARNING: possible circular locking dependency detected
6.12.0-41.el10.s390x+debug
------------------------------------------------------
dd/32479 is trying to acquire lock:
0015a20accd0d4f8 ((console_sem).lock){-.-.}-{2:2}, at: down_trylock+0x26/0x90
but task is already holding lock:
000000017e461698 (&zone->lock){-.-.}-{2:2}, at: rmqueue_bulk+0xac/0x8f0
the existing dependency chain (in reverse order) is:
-> #4 (&zone->lock){-.-.}-{2:2}:
-> #3 (hrtimer_bases.lock){-.-.}-{2:2}:
-> #2 (&rq->__lock){-.-.}-{2:2}:
-> #1 (&p->pi_lock){-.-.}-{2:2}:
-> #0 ((console_sem).lock){-.-.}-{2:2}:
The console_sem -> pi_lock dependency is due to calling try_to_wake_up()
while holding the console_sem raw_spinlock. This dependency can be broken
by using wake_q to do the wakeup instead of calling try_to_wake_up()
under the console_sem lock. This will also make the semaphore's
raw_spinlock become a terminal lock without taking any further locks
underneath it.
The hrtimer_bases.lock is a raw_spinlock while zone->lock is a
spinlock. The hrtimer_bases.lock -> zone->lock dependency happens via
the debug_objects_fill_pool() helper function in the debugobjects code.
-> #4 (&zone->lock){-.-.}-{2:2}:
__lock_acquire+0xe86/0x1cc0
lock_acquire.part.0+0x258/0x630
lock_acquire+0xb8/0xe0
_raw_spin_lock_irqsave+0xb4/0x120
rmqueue_bulk+0xac/0x8f0
__rmqueue_pcplist+0x580/0x830
rmqueue_pcplist+0xfc/0x470
rmqueue.isra.0+0xdec/0x11b0
get_page_from_freelist+0x2ee/0xeb0
__alloc_pages_noprof+0x2c2/0x520
alloc_pages_mpol_noprof+0x1fc/0x4d0
alloc_pages_noprof+0x8c/0xe0
allocate_slab+0x320/0x460
___slab_alloc+0xa58/0x12b0
__slab_alloc.isra.0+0x42/0x60
kmem_cache_alloc_noprof+0x304/0x350
fill_pool+0xf6/0x450
debug_object_activate+0xfe/0x360
enqueue_hrtimer+0x34/0x190
__run_hrtimer+0x3c8/0x4c0
__hrtimer_run_queues+0x1b2/0x260
hrtimer_interrupt+0x316/0x760
do_IRQ+0x9a/0xe0
do_irq_async+0xf6/0x160
Normally a raw_spinlock to spinlock dependency is not legitimate
and will be warned if CONFIG_PROVE_RAW_LOCK_NESTING is enabled,
but debug_objects_fill_pool() is an exception as it explicitly
allows this dependency for non-PREEMPT_RT kernel without causing
PROVE_RAW_LOCK_NESTING lockdep splat. As a result, this dependency is
legitimate and not a bug.
Anyway, semaphore is the only locking primitive left that is still
using try_to_wake_up() to do wakeup inside critical section, all the
other locking primitives had been migrated to use wake_q to do wakeup
outside of the critical section. It is also possible that there are
other circular locking dependencies involving printk/console_sem or
other existing/new semaphores lurking somewhere which may show up in
the future. Let just do the migration now to wake_q to avoid headache
like this.
Reported-by: yzbot+ed801a886dfdbfe7136d@syzkaller.appspotmail.com
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250307232717.1759087-3-boqun.feng@gmail.combjoto pushed a commit
that referenced
this pull request
Mar 17, 2025
into HEAD KVM x86 fixes for 6.14-rcN #2 - Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow. - Ensure DEBUGCTL is context switched on AMD to avoid running the guest with the host's value, which can lead to unexpected bus lock #DBs. - Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly emulate BTF. KVM's lack of context switching has meant BTF has always been broken to some extent. - Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest can enable DebugSwap without KVM's knowledge. - Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO memory" phase without actually generating a write-protection fault. - Fix a printf() goof in the SEV smoke test that causes build failures with -Werror. - Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2 isn't supported by KVM.
bjoto pushed a commit
that referenced
this pull request
Mar 17, 2025
A blocking notification chain uses a read-write semaphore to protect the integrity of the chain. The semaphore is acquired for writing when adding / removing notifiers to / from the chain and acquired for reading when traversing the chain and informing notifiers about an event. In case of the blocking switchdev notification chain, recursive notifications are possible which leads to the semaphore being acquired twice for reading and to lockdep warnings being generated [1]. Specifically, this can happen when the bridge driver processes a SWITCHDEV_BRPORT_UNOFFLOADED event which causes it to emit notifications about deferred events when calling switchdev_deferred_process(). Fix this by converting the notification chain to a raw notification chain in a similar fashion to the netdev notification chain. Protect the chain using the RTNL mutex by acquiring it when modifying the chain. Events are always informed under the RTNL mutex, but add an assertion in call_switchdev_blocking_notifiers() to make sure this is not violated in the future. Maintain the "blocking" prefix as events are always emitted from process context and listeners are allowed to block. [1]: WARNING: possible recursive locking detected 6.14.0-rc4-custom-g079270089484 #1 Not tainted -------------------------------------------- ip/52731 is trying to acquire lock: ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0 but task is already holding lock: ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock((switchdev_blocking_notif_chain).rwsem); lock((switchdev_blocking_notif_chain).rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by ip/52731: #0: ffffffff84f795b0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_newlink+0x727/0x1dc0 #1: ffffffff8731f628 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_newlink+0x790/0x1dc0 #2: ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0 stack backtrace: ... ? __pfx_down_read+0x10/0x10 ? __pfx_mark_lock+0x10/0x10 ? __pfx_switchdev_port_attr_set_deferred+0x10/0x10 blocking_notifier_call_chain+0x58/0xa0 switchdev_port_attr_notify.constprop.0+0xb3/0x1b0 ? __pfx_switchdev_port_attr_notify.constprop.0+0x10/0x10 ? mark_held_locks+0x94/0xe0 ? switchdev_deferred_process+0x11a/0x340 switchdev_port_attr_set_deferred+0x27/0xd0 switchdev_deferred_process+0x164/0x340 br_switchdev_port_unoffload+0xc8/0x100 [bridge] br_switchdev_blocking_event+0x29f/0x580 [bridge] notifier_call_chain+0xa2/0x440 blocking_notifier_call_chain+0x6e/0xa0 switchdev_bridge_port_unoffload+0xde/0x1a0 ... Fixes: f7a70d6 ("net: bridge: switchdev: Ensure deferred event delivery on unoffload") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/20250305121509.631207-1-amcohen@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
bjoto pushed a commit
that referenced
this pull request
Mar 17, 2025
When on a MANA VM hibernation is triggered, as part of hibernate_snapshot(), mana_gd_suspend() and mana_gd_resume() are called. If during this mana_gd_resume(), a failure occurs with HWC creation, mana_port_debugfs pointer does not get reinitialized and ends up pointing to older, cleaned-up dentry. Further in the hibernation path, as part of power_down(), mana_gd_shutdown() is triggered. This call, unaware of the failures in resume, tries to cleanup the already cleaned up mana_port_debugfs value and hits the following bug: [ 191.359296] mana 7870:00:00.0: Shutdown was called [ 191.359918] BUG: kernel NULL pointer dereference, address: 0000000000000098 [ 191.360584] #PF: supervisor write access in kernel mode [ 191.361125] #PF: error_code(0x0002) - not-present page [ 191.361727] PGD 1080ea067 P4D 0 [ 191.362172] Oops: Oops: 0002 [#1] SMP NOPTI [ 191.362606] CPU: 11 UID: 0 PID: 1674 Comm: bash Not tainted 6.14.0-rc5+ #2 [ 191.363292] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024 [ 191.364124] RIP: 0010:down_write+0x19/0x50 [ 191.364537] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb e8 de cd ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 16 65 48 8b 05 88 24 4c 6a 48 89 43 08 48 8b 5d [ 191.365867] RSP: 0000:ff45fbe0c1c037b8 EFLAGS: 00010246 [ 191.366350] RAX: 0000000000000000 RBX: 0000000000000098 RCX: ffffff8100000000 [ 191.366951] RDX: 0000000000000001 RSI: 0000000000000064 RDI: 0000000000000098 [ 191.367600] RBP: ff45fbe0c1c037c0 R08: 0000000000000000 R09: 0000000000000001 [ 191.368225] R10: ff45fbe0d2b01000 R11: 0000000000000008 R12: 0000000000000000 [ 191.368874] R13: 000000000000000b R14: ff43dc27509d67c0 R15: 0000000000000020 [ 191.369549] FS: 00007dbc5001e740(0000) GS:ff43dc663f380000(0000) knlGS:0000000000000000 [ 191.370213] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 191.370830] CR2: 0000000000000098 CR3: 0000000168e8e002 CR4: 0000000000b73ef0 [ 191.371557] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 191.372192] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 191.372906] Call Trace: [ 191.373262] <TASK> [ 191.373621] ? show_regs+0x64/0x70 [ 191.374040] ? __die+0x24/0x70 [ 191.374468] ? page_fault_oops+0x290/0x5b0 [ 191.374875] ? do_user_addr_fault+0x448/0x800 [ 191.375357] ? exc_page_fault+0x7a/0x160 [ 191.375971] ? asm_exc_page_fault+0x27/0x30 [ 191.376416] ? down_write+0x19/0x50 [ 191.376832] ? down_write+0x12/0x50 [ 191.377232] simple_recursive_removal+0x4a/0x2a0 [ 191.377679] ? __pfx_remove_one+0x10/0x10 [ 191.378088] debugfs_remove+0x44/0x70 [ 191.378530] mana_detach+0x17c/0x4f0 [ 191.378950] ? __flush_work+0x1e2/0x3b0 [ 191.379362] ? __cond_resched+0x1a/0x50 [ 191.379787] mana_remove+0xf2/0x1a0 [ 191.380193] mana_gd_shutdown+0x3b/0x70 [ 191.380642] pci_device_shutdown+0x3a/0x80 [ 191.381063] device_shutdown+0x13e/0x230 [ 191.381480] kernel_power_off+0x35/0x80 [ 191.381890] hibernate+0x3c6/0x470 [ 191.382312] state_store+0xcb/0xd0 [ 191.382734] kobj_attr_store+0x12/0x30 [ 191.383211] sysfs_kf_write+0x3e/0x50 [ 191.383640] kernfs_fop_write_iter+0x140/0x1d0 [ 191.384106] vfs_write+0x271/0x440 [ 191.384521] ksys_write+0x72/0xf0 [ 191.384924] __x64_sys_write+0x19/0x20 [ 191.385313] x64_sys_call+0x2b0/0x20b0 [ 191.385736] do_syscall_64+0x79/0x150 [ 191.386146] ? __mod_memcg_lruvec_state+0xe7/0x240 [ 191.386676] ? __lruvec_stat_mod_folio+0x79/0xb0 [ 191.387124] ? __pfx_lru_add+0x10/0x10 [ 191.387515] ? queued_spin_unlock+0x9/0x10 [ 191.387937] ? do_anonymous_page+0x33c/0xa00 [ 191.388374] ? __handle_mm_fault+0xcf3/0x1210 [ 191.388805] ? __count_memcg_events+0xbe/0x180 [ 191.389235] ? handle_mm_fault+0xae/0x300 [ 191.389588] ? do_user_addr_fault+0x559/0x800 [ 191.390027] ? irqentry_exit_to_user_mode+0x43/0x230 [ 191.390525] ? irqentry_exit+0x1d/0x30 [ 191.390879] ? exc_page_fault+0x86/0x160 [ 191.391235] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 191.391745] RIP: 0033:0x7dbc4ff1c574 [ 191.392111] Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 [ 191.393412] RSP: 002b:00007ffd95a23ab8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ 191.393990] RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007dbc4ff1c574 [ 191.394594] RDX: 0000000000000005 RSI: 00005a6eeadb0ce0 RDI: 0000000000000001 [ 191.395215] RBP: 00007ffd95a23ae0 R08: 00007dbc50003b20 R09: 0000000000000000 [ 191.395805] R10: 0000000000000001 R11: 0000000000000202 R12: 0000000000000005 [ 191.396404] R13: 00005a6eeadb0ce0 R14: 00007dbc500045c0 R15: 00007dbc50001ee0 [ 191.396987] </TASK> To fix this, we explicitly set such mana debugfs variables to NULL after debugfs_remove() is called. Fixes: 6607c17 ("net: mana: Enable debugfs files for MANA device") Cc: stable@vger.kernel.org Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Link: https://patch.msgid.link/1741688260-28922-1-git-send-email-shradhagupta@linux.microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment
2 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
No description provided.