Add Ubuntu/Debian support

[willian]

I assume the users has Postgres and Redis on his machine.

[ericboehs]

Seems like I did drop:all and create:all here because the test db wouldn't get created w/o it.

[willian]

Really? I have the test db without :all
With :all I received this messages:

This task only modifies local databases. swagexpert_development is on a remote host.
This task only modifies local databases. swagexpert_test is on a remote host.
This task only modifies local databases. swagexpert_staging is on a remote host.
This task only modifies local databases. swagexpert_production is on a remote host.

https://github.com/rails/rails/blob/master/activerecord/lib/active_record/tasks/database_tasks.rb#L197

[ericboehs]

Sounds like you have your database remotely? Have you modified the database.yml or something?

[willian]

Yes, I have.
I use two VM on vagrant, one for the Postgres and another one for the app. Here is my database.yml

development: &developmentadapter : postgresqlencoding : unicodedatabase : swagexpert_developmenttemplate : template0pool : 5min_messages : warninghost : <%= ENV['DATABASE_HOST'] %>test: &test<<: *developmentdatabase : swagexpert_teststaging: &staging<<: *developmentdatabase : swagexpert_stagingproduction: &production<<: *developmentdatabase : swagexpert_production

The DATABASE_HOST variable has the IP of my db VM.

[ericboehs]

Why do you have a separate VM for your db?

[ericboehs]

We like to nuke the db with bin/setup though as it gets us all on the same playing field. We know it's not that data that's causing the problem on one machine vs another because they're all built from the same seed file. We like to reset our database several times daily.

[willian]

Great! I didn't know that 😉
I'll use only one VM for the project

[ericboehs]

Sounds good :)

[willian]

I'll put :all back 😄

[jcamenisch]

Note that DB_KEEP=1 will also allow you to do whatever you want with your db, since it will skip those commands.

[ericboehs]

With some tweaks this will be fine. I need to test it on a ubuntu box as well. I'll try to get to that this weekend.

[willian]

@ericboehs, What you think about this approach?

[ericboehs]

Not bad.

The latest version of ruby 2.0 is available here: ftp://ftp.ruby-lang.org/pub/ruby/ruby-2.0-stable.tar.gz .. but nice sed work ;) We could probably just assume if they have any version of ruby 2.0 it's good enough.

Line 98: Tick marks have been deprecated in favor of$()` (see). But that doesn't matter as 95-102 could be:

if$(ruby -e'p !!RUBY_VERSION[/^2.0/]');then

As I mentioned in my previous comment, you could pipe wget's output directly to tar. So 106-108:

append_log successfully wget -qO- "ftp://ftp.ruby-lang.org/pub/ruby/ruby-2.0-stable.tar.gz"| tar xzf -

[willian]

I tried to put wget and tar on the same line as you said, but:

bzip2: Compressed file ends unexpectedly;
perhaps it is corrupted? *Possible* reason follows.
bzip2: Inappropriate ioctl for device
Input file = (stdin), output file = (stdout)
It is possible that the compressed file(s) have become corrupted.
You can use the -tvv option to test integrity of such files.
You can use the `bzip2recover' program to attempt to recover
data from undamaged sections of corrupted files.
tar: Child returned status 2
tar: Error is not recoverable: exiting now
cp: cannot stat `phantomjs-*/bin/phantomjs': No such file or directory

Here is the line:

# $PJSURL = "https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-x86_64.tar.bz2"
append_log successfully wget -qO - $PJSURL| tar xjpf -

[ericboehs]

Try dropping the p flag from tar. This works for me:

wget -qO - https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-x86_64.tar.bz2 | tar xjf -

[ericboehs]

Hmm looks like the p flag just preserves permissions, so I'm not sure why that would fail.

Here's my full output:

wget -qO - https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-x86_64.tar.bz2 | tar xjf - && ls -al phantomjs-*&& rm -r phantomjs-*
total 56
drwxr-xr-x 8 ericboehs staff 272 Jun 5 12:56 .
drwx------ 43 ericboehs staff 1462 Aug 2 22:37 ..
-rw-r--r-- 1 ericboehs staff 14945 Jun 5 12:56 ChangeLog
-rw-r--r-- 1 ericboehs staff 1429 Jun 5 12:56 LICENSE.BSD
-rw-r--r-- 1 ericboehs staff 3957 Jun 5 12:56 README.md
drwxr-xr-x 3 ericboehs staff 102 Jun 5 12:56 bin
drwxr-xr-x 102 ericboehs staff 3468 Jun 5 12:56 examples
-rw-r--r-- 1 ericboehs staff 1888 Jun 5 12:56 third-party.txt

[willian]

I had to remove quietly successfully and now It works!

[willian]

I assume the users has Postgres and Redis on his machine.

[ericboehs]

Seems like I did drop:all and create:all here because the test db wouldn't get created w/o it.

[willian]

Really? I have the test db without :all
With :all I received this messages:

This task only modifies local databases. swagexpert_development is on a remote host.
This task only modifies local databases. swagexpert_test is on a remote host.
This task only modifies local databases. swagexpert_staging is on a remote host.
This task only modifies local databases. swagexpert_production is on a remote host.

https://github.com/rails/rails/blob/master/activerecord/lib/active_record/tasks/database_tasks.rb#L197

[ericboehs]

Sounds like you have your database remotely? Have you modified the database.yml or something?

[willian]

Yes, I have.
I use two VM on vagrant, one for the Postgres and another one for the app. Here is my database.yml

development: &developmentadapter : postgresqlencoding : unicodedatabase : swagexpert_developmenttemplate : template0pool : 5min_messages : warninghost : <%= ENV['DATABASE_HOST'] %>test: &test<<: *developmentdatabase : swagexpert_teststaging: &staging<<: *developmentdatabase : swagexpert_stagingproduction: &production<<: *developmentdatabase : swagexpert_production

The DATABASE_HOST variable has the IP of my db VM.

[ericboehs]

Why do you have a separate VM for your db?

[ericboehs]

We like to nuke the db with bin/setup though as it gets us all on the same playing field. We know it's not that data that's causing the problem on one machine vs another because they're all built from the same seed file. We like to reset our database several times daily.

[willian]

Great! I didn't know that 😉
I'll use only one VM for the project

[ericboehs]

Sounds good :)

[willian]

I'll put :all back 😄

[jcamenisch]

Note that DB_KEEP=1 will also allow you to do whatever you want with your db, since it will skip those commands.

[ericboehs]

With some tweaks this will be fine. I need to test it on a ubuntu box as well. I'll try to get to that this weekend.

[willian]

@ericboehs, What you think about this approach?

[ericboehs]

Not bad.

The latest version of ruby 2.0 is available here: ftp://ftp.ruby-lang.org/pub/ruby/ruby-2.0-stable.tar.gz .. but nice sed work ;) We could probably just assume if they have any version of ruby 2.0 it's good enough.

Line 98: Tick marks have been deprecated in favor of$()` (see). But that doesn't matter as 95-102 could be:

if$(ruby -e'p !!RUBY_VERSION[/^2.0/]');then

As I mentioned in my previous comment, you could pipe wget's output directly to tar. So 106-108:

append_log successfully wget -qO- "ftp://ftp.ruby-lang.org/pub/ruby/ruby-2.0-stable.tar.gz"| tar xzf -

[willian]

I tried to put wget and tar on the same line as you said, but:

bzip2: Compressed file ends unexpectedly;
perhaps it is corrupted? *Possible* reason follows.
bzip2: Inappropriate ioctl for device
Input file = (stdin), output file = (stdout)
It is possible that the compressed file(s) have become corrupted.
You can use the -tvv option to test integrity of such files.
You can use the `bzip2recover' program to attempt to recover
data from undamaged sections of corrupted files.
tar: Child returned status 2
tar: Error is not recoverable: exiting now
cp: cannot stat `phantomjs-*/bin/phantomjs': No such file or directory

Here is the line:

# $PJSURL = "https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-x86_64.tar.bz2"
append_log successfully wget -qO - $PJSURL| tar xjpf -

[ericboehs]

Try dropping the p flag from tar. This works for me:

wget -qO - https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-x86_64.tar.bz2 | tar xjf -

[ericboehs]

Hmm looks like the p flag just preserves permissions, so I'm not sure why that would fail.

Here's my full output:

wget -qO - https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-x86_64.tar.bz2 | tar xjf - && ls -al phantomjs-*&& rm -r phantomjs-*
total 56
drwxr-xr-x 8 ericboehs staff 272 Jun 5 12:56 .
drwx------ 43 ericboehs staff 1462 Aug 2 22:37 ..
-rw-r--r-- 1 ericboehs staff 14945 Jun 5 12:56 ChangeLog
-rw-r--r-- 1 ericboehs staff 1429 Jun 5 12:56 LICENSE.BSD
-rw-r--r-- 1 ericboehs staff 3957 Jun 5 12:56 README.md
drwxr-xr-x 3 ericboehs staff 102 Jun 5 12:56 bin
drwxr-xr-x 102 ericboehs staff 3468 Jun 5 12:56 examples
-rw-r--r-- 1 ericboehs staff 1888 Jun 5 12:56 third-party.txt

[willian]

I had to remove quietly successfully and now It works!

[willian]

I assume the users has Postgres and Redis on his machine.

[ericboehs]

Seems like I did drop:all and create:all here because the test db wouldn't get created w/o it.

[willian]

Really? I have the test db without :all
With :all I received this messages:

This task only modifies local databases. swagexpert_development is on a remote host.
This task only modifies local databases. swagexpert_test is on a remote host.
This task only modifies local databases. swagexpert_staging is on a remote host.
This task only modifies local databases. swagexpert_production is on a remote host.

https://github.com/rails/rails/blob/master/activerecord/lib/active_record/tasks/database_tasks.rb#L197

[ericboehs]

Sounds like you have your database remotely? Have you modified the database.yml or something?

[willian]

Yes, I have.
I use two VM on vagrant, one for the Postgres and another one for the app. Here is my database.yml

development: &developmentadapter : postgresqlencoding : unicodedatabase : swagexpert_developmenttemplate : template0pool : 5min_messages : warninghost : <%= ENV['DATABASE_HOST'] %>test: &test<<: *developmentdatabase : swagexpert_teststaging: &staging<<: *developmentdatabase : swagexpert_stagingproduction: &production<<: *developmentdatabase : swagexpert_production

The DATABASE_HOST variable has the IP of my db VM.

[ericboehs]

Why do you have a separate VM for your db?

[ericboehs]

We like to nuke the db with bin/setup though as it gets us all on the same playing field. We know it's not that data that's causing the problem on one machine vs another because they're all built from the same seed file. We like to reset our database several times daily.

[willian]

Great! I didn't know that 😉
I'll use only one VM for the project

[ericboehs]

Sounds good :)

[willian]

I'll put :all back 😄

[jcamenisch]

Note that DB_KEEP=1 will also allow you to do whatever you want with your db, since it will skip those commands.

[ericboehs]

With some tweaks this will be fine. I need to test it on a ubuntu box as well. I'll try to get to that this weekend.

[willian]

@ericboehs, What you think about this approach?

[ericboehs]

Not bad.

The latest version of ruby 2.0 is available here: ftp://ftp.ruby-lang.org/pub/ruby/ruby-2.0-stable.tar.gz .. but nice sed work ;) We could probably just assume if they have any version of ruby 2.0 it's good enough.

Line 98: Tick marks have been deprecated in favor of$()` (see). But that doesn't matter as 95-102 could be:

if$(ruby -e'p !!RUBY_VERSION[/^2.0/]');then

As I mentioned in my previous comment, you could pipe wget's output directly to tar. So 106-108:

append_log successfully wget -qO- "ftp://ftp.ruby-lang.org/pub/ruby/ruby-2.0-stable.tar.gz"| tar xzf -

[willian]

I tried to put wget and tar on the same line as you said, but:

bzip2: Compressed file ends unexpectedly;
perhaps it is corrupted? *Possible* reason follows.
bzip2: Inappropriate ioctl for device
Input file = (stdin), output file = (stdout)
It is possible that the compressed file(s) have become corrupted.
You can use the -tvv option to test integrity of such files.
You can use the `bzip2recover' program to attempt to recover
data from undamaged sections of corrupted files.
tar: Child returned status 2
tar: Error is not recoverable: exiting now
cp: cannot stat `phantomjs-*/bin/phantomjs': No such file or directory

Here is the line:

# $PJSURL = "https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-x86_64.tar.bz2"
append_log successfully wget -qO - $PJSURL| tar xjpf -

[ericboehs]

Try dropping the p flag from tar. This works for me:

wget -qO - https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-x86_64.tar.bz2 | tar xjf -

[ericboehs]

Hmm looks like the p flag just preserves permissions, so I'm not sure why that would fail.

Here's my full output:

wget -qO - https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-x86_64.tar.bz2 | tar xjf - && ls -al phantomjs-*&& rm -r phantomjs-*
total 56
drwxr-xr-x 8 ericboehs staff 272 Jun 5 12:56 .
drwx------ 43 ericboehs staff 1462 Aug 2 22:37 ..
-rw-r--r-- 1 ericboehs staff 14945 Jun 5 12:56 ChangeLog
-rw-r--r-- 1 ericboehs staff 1429 Jun 5 12:56 LICENSE.BSD
-rw-r--r-- 1 ericboehs staff 3957 Jun 5 12:56 README.md
drwxr-xr-x 3 ericboehs staff 102 Jun 5 12:56 bin
drwxr-xr-x 102 ericboehs staff 3468 Jun 5 12:56 examples
-rw-r--r-- 1 ericboehs staff 1888 Jun 5 12:56 third-party.txt

[willian]

I had to remove quietly successfully and now It works!

[willian]

I assume the users has Postgres and Redis on his machine.

[ericboehs]

Seems like I did drop:all and create:all here because the test db wouldn't get created w/o it.

[willian]

Really? I have the test db without :all
With :all I received this messages:

This task only modifies local databases. swagexpert_development is on a remote host.
This task only modifies local databases. swagexpert_test is on a remote host.
This task only modifies local databases. swagexpert_staging is on a remote host.
This task only modifies local databases. swagexpert_production is on a remote host.

https://github.com/rails/rails/blob/master/activerecord/lib/active_record/tasks/database_tasks.rb#L197

[ericboehs]

Sounds like you have your database remotely? Have you modified the database.yml or something?

[willian]

Yes, I have.
I use two VM on vagrant, one for the Postgres and another one for the app. Here is my database.yml

development: &developmentadapter : postgresqlencoding : unicodedatabase : swagexpert_developmenttemplate : template0pool : 5min_messages : warninghost : <%= ENV['DATABASE_HOST'] %>test: &test<<: *developmentdatabase : swagexpert_teststaging: &staging<<: *developmentdatabase : swagexpert_stagingproduction: &production<<: *developmentdatabase : swagexpert_production

The DATABASE_HOST variable has the IP of my db VM.

[ericboehs]

Why do you have a separate VM for your db?

[ericboehs]

We like to nuke the db with bin/setup though as it gets us all on the same playing field. We know it's not that data that's causing the problem on one machine vs another because they're all built from the same seed file. We like to reset our database several times daily.

[willian]

Great! I didn't know that 😉
I'll use only one VM for the project

[ericboehs]

Sounds good :)

[willian]

I'll put :all back 😄

[jcamenisch]

Note that DB_KEEP=1 will also allow you to do whatever you want with your db, since it will skip those commands.

[ericboehs]

With some tweaks this will be fine. I need to test it on a ubuntu box as well. I'll try to get to that this weekend.

[willian]

@ericboehs, What you think about this approach?

[ericboehs]

Not bad.

The latest version of ruby 2.0 is available here: ftp://ftp.ruby-lang.org/pub/ruby/ruby-2.0-stable.tar.gz .. but nice sed work ;) We could probably just assume if they have any version of ruby 2.0 it's good enough.

Line 98: Tick marks have been deprecated in favor of$()` (see). But that doesn't matter as 95-102 could be:

if$(ruby -e'p !!RUBY_VERSION[/^2.0/]');then

As I mentioned in my previous comment, you could pipe wget's output directly to tar. So 106-108:

append_log successfully wget -qO- "ftp://ftp.ruby-lang.org/pub/ruby/ruby-2.0-stable.tar.gz"| tar xzf -

[willian]

I tried to put wget and tar on the same line as you said, but:

bzip2: Compressed file ends unexpectedly;
perhaps it is corrupted? *Possible* reason follows.
bzip2: Inappropriate ioctl for device
Input file = (stdin), output file = (stdout)
It is possible that the compressed file(s) have become corrupted.
You can use the -tvv option to test integrity of such files.
You can use the `bzip2recover' program to attempt to recover
data from undamaged sections of corrupted files.
tar: Child returned status 2
tar: Error is not recoverable: exiting now
cp: cannot stat `phantomjs-*/bin/phantomjs': No such file or directory

Here is the line:

# $PJSURL = "https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-x86_64.tar.bz2"
append_log successfully wget -qO - $PJSURL| tar xjpf -

[ericboehs]

Try dropping the p flag from tar. This works for me:

wget -qO - https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-x86_64.tar.bz2 | tar xjf -

[ericboehs]

Hmm looks like the p flag just preserves permissions, so I'm not sure why that would fail.

Here's my full output:

wget -qO - https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-x86_64.tar.bz2 | tar xjf - && ls -al phantomjs-*&& rm -r phantomjs-*
total 56
drwxr-xr-x 8 ericboehs staff 272 Jun 5 12:56 .
drwx------ 43 ericboehs staff 1462 Aug 2 22:37 ..
-rw-r--r-- 1 ericboehs staff 14945 Jun 5 12:56 ChangeLog
-rw-r--r-- 1 ericboehs staff 1429 Jun 5 12:56 LICENSE.BSD
-rw-r--r-- 1 ericboehs staff 3957 Jun 5 12:56 README.md
drwxr-xr-x 3 ericboehs staff 102 Jun 5 12:56 bin
drwxr-xr-x 102 ericboehs staff 3468 Jun 5 12:56 examples
-rw-r--r-- 1 ericboehs staff 1888 Jun 5 12:56 third-party.txt

[willian]

I had to remove quietly successfully and now It works!

[willian]

I assume the users has Postgres and Redis on his machine.

[ericboehs]

Seems like I did drop:all and create:all here because the test db wouldn't get created w/o it.

[willian]

Really? I have the test db without :all
With :all I received this messages:

This task only modifies local databases. swagexpert_development is on a remote host.
This task only modifies local databases. swagexpert_test is on a remote host.
This task only modifies local databases. swagexpert_staging is on a remote host.
This task only modifies local databases. swagexpert_production is on a remote host.

https://github.com/rails/rails/blob/master/activerecord/lib/active_record/tasks/database_tasks.rb#L197

[ericboehs]

Sounds like you have your database remotely? Have you modified the database.yml or something?

[willian]

Yes, I have.
I use two VM on vagrant, one for the Postgres and another one for the app. Here is my database.yml

development: &developmentadapter : postgresqlencoding : unicodedatabase : swagexpert_developmenttemplate : template0pool : 5min_messages : warninghost : <%= ENV['DATABASE_HOST'] %>test: &test<<: *developmentdatabase : swagexpert_teststaging: &staging<<: *developmentdatabase : swagexpert_stagingproduction: &production<<: *developmentdatabase : swagexpert_production

The DATABASE_HOST variable has the IP of my db VM.

[ericboehs]

Why do you have a separate VM for your db?

[ericboehs]

We like to nuke the db with bin/setup though as it gets us all on the same playing field. We know it's not that data that's causing the problem on one machine vs another because they're all built from the same seed file. We like to reset our database several times daily.

[willian]

Great! I didn't know that 😉
I'll use only one VM for the project

[ericboehs]

Sounds good :)

[willian]

I'll put :all back 😄

[jcamenisch]

Note that DB_KEEP=1 will also allow you to do whatever you want with your db, since it will skip those commands.

[ericboehs]

With some tweaks this will be fine. I need to test it on a ubuntu box as well. I'll try to get to that this weekend.

[willian]

@ericboehs, What you think about this approach?

[ericboehs]

Not bad.

The latest version of ruby 2.0 is available here: ftp://ftp.ruby-lang.org/pub/ruby/ruby-2.0-stable.tar.gz .. but nice sed work ;) We could probably just assume if they have any version of ruby 2.0 it's good enough.

Line 98: Tick marks have been deprecated in favor of$()` (see). But that doesn't matter as 95-102 could be:

if$(ruby -e'p !!RUBY_VERSION[/^2.0/]');then

As I mentioned in my previous comment, you could pipe wget's output directly to tar. So 106-108:

append_log successfully wget -qO- "ftp://ftp.ruby-lang.org/pub/ruby/ruby-2.0-stable.tar.gz"| tar xzf -

[willian]

I tried to put wget and tar on the same line as you said, but:

bzip2: Compressed file ends unexpectedly;
perhaps it is corrupted? *Possible* reason follows.
bzip2: Inappropriate ioctl for device
Input file = (stdin), output file = (stdout)
It is possible that the compressed file(s) have become corrupted.
You can use the -tvv option to test integrity of such files.
You can use the `bzip2recover' program to attempt to recover
data from undamaged sections of corrupted files.
tar: Child returned status 2
tar: Error is not recoverable: exiting now
cp: cannot stat `phantomjs-*/bin/phantomjs': No such file or directory

Here is the line:

# $PJSURL = "https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-x86_64.tar.bz2"
append_log successfully wget -qO - $PJSURL| tar xjpf -

[ericboehs]

Try dropping the p flag from tar. This works for me:

wget -qO - https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-x86_64.tar.bz2 | tar xjf -

[ericboehs]

Hmm looks like the p flag just preserves permissions, so I'm not sure why that would fail.

Here's my full output:

wget -qO - https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-x86_64.tar.bz2 | tar xjf - && ls -al phantomjs-*&& rm -r phantomjs-*
total 56
drwxr-xr-x 8 ericboehs staff 272 Jun 5 12:56 .
drwx------ 43 ericboehs staff 1462 Aug 2 22:37 ..
-rw-r--r-- 1 ericboehs staff 14945 Jun 5 12:56 ChangeLog
-rw-r--r-- 1 ericboehs staff 1429 Jun 5 12:56 LICENSE.BSD
-rw-r--r-- 1 ericboehs staff 3957 Jun 5 12:56 README.md
drwxr-xr-x 3 ericboehs staff 102 Jun 5 12:56 bin
drwxr-xr-x 102 ericboehs staff 3468 Jun 5 12:56 examples
-rw-r--r-- 1 ericboehs staff 1888 Jun 5 12:56 third-party.txt

[willian]

I had to remove quietly successfully and now It works!

[willian]

I assume the users has Postgres and Redis on his machine.

[ericboehs]

Seems like I did drop:all and create:all here because the test db wouldn't get created w/o it.

[willian]

Really? I have the test db without :all
With :all I received this messages:

This task only modifies local databases. swagexpert_development is on a remote host.
This task only modifies local databases. swagexpert_test is on a remote host.
This task only modifies local databases. swagexpert_staging is on a remote host.
This task only modifies local databases. swagexpert_production is on a remote host.

https://github.com/rails/rails/blob/master/activerecord/lib/active_record/tasks/database_tasks.rb#L197

[ericboehs]

Sounds like you have your database remotely? Have you modified the database.yml or something?

[willian]

Yes, I have.
I use two VM on vagrant, one for the Postgres and another one for the app. Here is my database.yml

development: &developmentadapter : postgresqlencoding : unicodedatabase : swagexpert_developmenttemplate : template0pool : 5min_messages : warninghost : <%= ENV['DATABASE_HOST'] %>test: &test<<: *developmentdatabase : swagexpert_teststaging: &staging<<: *developmentdatabase : swagexpert_stagingproduction: &production<<: *developmentdatabase : swagexpert_production

The DATABASE_HOST variable has the IP of my db VM.

[ericboehs]

Why do you have a separate VM for your db?

[ericboehs]

We like to nuke the db with bin/setup though as it gets us all on the same playing field. We know it's not that data that's causing the problem on one machine vs another because they're all built from the same seed file. We like to reset our database several times daily.

[willian]

Great! I didn't know that 😉
I'll use only one VM for the project

[ericboehs]

Sounds good :)

[willian]

I'll put :all back 😄

[jcamenisch]

Note that DB_KEEP=1 will also allow you to do whatever you want with your db, since it will skip those commands.

[ericboehs]

With some tweaks this will be fine. I need to test it on a ubuntu box as well. I'll try to get to that this weekend.

[willian]

@ericboehs, What you think about this approach?

[ericboehs]

Not bad.

The latest version of ruby 2.0 is available here: ftp://ftp.ruby-lang.org/pub/ruby/ruby-2.0-stable.tar.gz .. but nice sed work ;) We could probably just assume if they have any version of ruby 2.0 it's good enough.

Line 98: Tick marks have been deprecated in favor of$()` (see). But that doesn't matter as 95-102 could be:

if$(ruby -e'p !!RUBY_VERSION[/^2.0/]');then

As I mentioned in my previous comment, you could pipe wget's output directly to tar. So 106-108:

append_log successfully wget -qO- "ftp://ftp.ruby-lang.org/pub/ruby/ruby-2.0-stable.tar.gz"| tar xzf -

[willian]

I tried to put wget and tar on the same line as you said, but:

bzip2: Compressed file ends unexpectedly;
perhaps it is corrupted? *Possible* reason follows.
bzip2: Inappropriate ioctl for device
Input file = (stdin), output file = (stdout)
It is possible that the compressed file(s) have become corrupted.
You can use the -tvv option to test integrity of such files.
You can use the `bzip2recover' program to attempt to recover
data from undamaged sections of corrupted files.
tar: Child returned status 2
tar: Error is not recoverable: exiting now
cp: cannot stat `phantomjs-*/bin/phantomjs': No such file or directory

Here is the line:

# $PJSURL = "https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-x86_64.tar.bz2"
append_log successfully wget -qO - $PJSURL| tar xjpf -

[ericboehs]

Try dropping the p flag from tar. This works for me:

wget -qO - https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-x86_64.tar.bz2 | tar xjf -

[ericboehs]

Hmm looks like the p flag just preserves permissions, so I'm not sure why that would fail.

Here's my full output:

wget -qO - https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-x86_64.tar.bz2 | tar xjf - && ls -al phantomjs-*&& rm -r phantomjs-*
total 56
drwxr-xr-x 8 ericboehs staff 272 Jun 5 12:56 .
drwx------ 43 ericboehs staff 1462 Aug 2 22:37 ..
-rw-r--r-- 1 ericboehs staff 14945 Jun 5 12:56 ChangeLog
-rw-r--r-- 1 ericboehs staff 1429 Jun 5 12:56 LICENSE.BSD
-rw-r--r-- 1 ericboehs staff 3957 Jun 5 12:56 README.md
drwxr-xr-x 3 ericboehs staff 102 Jun 5 12:56 bin
drwxr-xr-x 102 ericboehs staff 3468 Jun 5 12:56 examples
-rw-r--r-- 1 ericboehs staff 1888 Jun 5 12:56 third-party.txt

[willian]

I had to remove quietly successfully and now It works!

[willian]

I assume the users has Postgres and Redis on his machine.

[ericboehs]

Seems like I did drop:all and create:all here because the test db wouldn't get created w/o it.

[willian]

Really? I have the test db without :all
With :all I received this messages:

This task only modifies local databases. swagexpert_development is on a remote host.
This task only modifies local databases. swagexpert_test is on a remote host.
This task only modifies local databases. swagexpert_staging is on a remote host.
This task only modifies local databases. swagexpert_production is on a remote host.

https://github.com/rails/rails/blob/master/activerecord/lib/active_record/tasks/database_tasks.rb#L197

[ericboehs]

Sounds like you have your database remotely? Have you modified the database.yml or something?

[willian]

Yes, I have.
I use two VM on vagrant, one for the Postgres and another one for the app. Here is my database.yml

development: &developmentadapter : postgresqlencoding : unicodedatabase : swagexpert_developmenttemplate : template0pool : 5min_messages : warninghost : <%= ENV['DATABASE_HOST'] %>test: &test<<: *developmentdatabase : swagexpert_teststaging: &staging<<: *developmentdatabase : swagexpert_stagingproduction: &production<<: *developmentdatabase : swagexpert_production

The DATABASE_HOST variable has the IP of my db VM.

[ericboehs]

Why do you have a separate VM for your db?

[ericboehs]

We like to nuke the db with bin/setup though as it gets us all on the same playing field. We know it's not that data that's causing the problem on one machine vs another because they're all built from the same seed file. We like to reset our database several times daily.

[willian]

Great! I didn't know that 😉
I'll use only one VM for the project

[ericboehs]

Sounds good :)

[willian]

I'll put :all back 😄

[jcamenisch]

Note that DB_KEEP=1 will also allow you to do whatever you want with your db, since it will skip those commands.

[ericboehs]

With some tweaks this will be fine. I need to test it on a ubuntu box as well. I'll try to get to that this weekend.

[willian]

@ericboehs, What you think about this approach?

[ericboehs]

Not bad.

The latest version of ruby 2.0 is available here: ftp://ftp.ruby-lang.org/pub/ruby/ruby-2.0-stable.tar.gz .. but nice sed work ;) We could probably just assume if they have any version of ruby 2.0 it's good enough.

Line 98: Tick marks have been deprecated in favor of$()` (see). But that doesn't matter as 95-102 could be:

if$(ruby -e'p !!RUBY_VERSION[/^2.0/]');then

As I mentioned in my previous comment, you could pipe wget's output directly to tar. So 106-108:

append_log successfully wget -qO- "ftp://ftp.ruby-lang.org/pub/ruby/ruby-2.0-stable.tar.gz"| tar xzf -

[willian]

I tried to put wget and tar on the same line as you said, but:

bzip2: Compressed file ends unexpectedly;
perhaps it is corrupted? *Possible* reason follows.
bzip2: Inappropriate ioctl for device
Input file = (stdin), output file = (stdout)
It is possible that the compressed file(s) have become corrupted.
You can use the -tvv option to test integrity of such files.
You can use the `bzip2recover' program to attempt to recover
data from undamaged sections of corrupted files.
tar: Child returned status 2
tar: Error is not recoverable: exiting now
cp: cannot stat `phantomjs-*/bin/phantomjs': No such file or directory

Here is the line:

# $PJSURL = "https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-x86_64.tar.bz2"
append_log successfully wget -qO - $PJSURL| tar xjpf -

[ericboehs]

Try dropping the p flag from tar. This works for me:

wget -qO - https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-x86_64.tar.bz2 | tar xjf -

[ericboehs]

Hmm looks like the p flag just preserves permissions, so I'm not sure why that would fail.

Here's my full output:

wget -qO - https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-x86_64.tar.bz2 | tar xjf - && ls -al phantomjs-*&& rm -r phantomjs-*
total 56
drwxr-xr-x 8 ericboehs staff 272 Jun 5 12:56 .
drwx------ 43 ericboehs staff 1462 Aug 2 22:37 ..
-rw-r--r-- 1 ericboehs staff 14945 Jun 5 12:56 ChangeLog
-rw-r--r-- 1 ericboehs staff 1429 Jun 5 12:56 LICENSE.BSD
-rw-r--r-- 1 ericboehs staff 3957 Jun 5 12:56 README.md
drwxr-xr-x 3 ericboehs staff 102 Jun 5 12:56 bin
drwxr-xr-x 102 ericboehs staff 3468 Jun 5 12:56 examples
-rw-r--r-- 1 ericboehs staff 1888 Jun 5 12:56 third-party.txt

[willian]

I had to remove quietly successfully and now It works!

[willian]

I assume the users has Postgres and Redis on his machine.

[ericboehs]

Seems like I did drop:all and create:all here because the test db wouldn't get created w/o it.

[willian]

Really? I have the test db without :all
With :all I received this messages:

This task only modifies local databases. swagexpert_development is on a remote host.
This task only modifies local databases. swagexpert_test is on a remote host.
This task only modifies local databases. swagexpert_staging is on a remote host.
This task only modifies local databases. swagexpert_production is on a remote host.

https://github.com/rails/rails/blob/master/activerecord/lib/active_record/tasks/database_tasks.rb#L197

[ericboehs]

Sounds like you have your database remotely? Have you modified the database.yml or something?

[willian]

Yes, I have.
I use two VM on vagrant, one for the Postgres and another one for the app. Here is my database.yml

development: &developmentadapter : postgresqlencoding : unicodedatabase : swagexpert_developmenttemplate : template0pool : 5min_messages : warninghost : <%= ENV['DATABASE_HOST'] %>test: &test<<: *developmentdatabase : swagexpert_teststaging: &staging<<: *developmentdatabase : swagexpert_stagingproduction: &production<<: *developmentdatabase : swagexpert_production

The DATABASE_HOST variable has the IP of my db VM.

[ericboehs]

Why do you have a separate VM for your db?

[ericboehs]

We like to nuke the db with bin/setup though as it gets us all on the same playing field. We know it's not that data that's causing the problem on one machine vs another because they're all built from the same seed file. We like to reset our database several times daily.

[willian]

Great! I didn't know that 😉
I'll use only one VM for the project

[ericboehs]

Sounds good :)

[willian]

I'll put :all back 😄

[jcamenisch]

Note that DB_KEEP=1 will also allow you to do whatever you want with your db, since it will skip those commands.

[ericboehs]

With some tweaks this will be fine. I need to test it on a ubuntu box as well. I'll try to get to that this weekend.

[willian]

@ericboehs, What you think about this approach?

[ericboehs]

Not bad.

The latest version of ruby 2.0 is available here: ftp://ftp.ruby-lang.org/pub/ruby/ruby-2.0-stable.tar.gz .. but nice sed work ;) We could probably just assume if they have any version of ruby 2.0 it's good enough.

Line 98: Tick marks have been deprecated in favor of$()` (see). But that doesn't matter as 95-102 could be:

if$(ruby -e'p !!RUBY_VERSION[/^2.0/]');then

As I mentioned in my previous comment, you could pipe wget's output directly to tar. So 106-108:

append_log successfully wget -qO- "ftp://ftp.ruby-lang.org/pub/ruby/ruby-2.0-stable.tar.gz"| tar xzf -

[willian]

I tried to put wget and tar on the same line as you said, but:

bzip2: Compressed file ends unexpectedly;
perhaps it is corrupted? *Possible* reason follows.
bzip2: Inappropriate ioctl for device
Input file = (stdin), output file = (stdout)
It is possible that the compressed file(s) have become corrupted.
You can use the -tvv option to test integrity of such files.
You can use the `bzip2recover' program to attempt to recover
data from undamaged sections of corrupted files.
tar: Child returned status 2
tar: Error is not recoverable: exiting now
cp: cannot stat `phantomjs-*/bin/phantomjs': No such file or directory

Here is the line:

# $PJSURL = "https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-x86_64.tar.bz2"
append_log successfully wget -qO - $PJSURL| tar xjpf -

[ericboehs]

Try dropping the p flag from tar. This works for me:

wget -qO - https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-x86_64.tar.bz2 | tar xjf -

[ericboehs]

Hmm looks like the p flag just preserves permissions, so I'm not sure why that would fail.

Here's my full output:

wget -qO - https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-x86_64.tar.bz2 | tar xjf - && ls -al phantomjs-*&& rm -r phantomjs-*
total 56
drwxr-xr-x 8 ericboehs staff 272 Jun 5 12:56 .
drwx------ 43 ericboehs staff 1462 Aug 2 22:37 ..
-rw-r--r-- 1 ericboehs staff 14945 Jun 5 12:56 ChangeLog
-rw-r--r-- 1 ericboehs staff 1429 Jun 5 12:56 LICENSE.BSD
-rw-r--r-- 1 ericboehs staff 3957 Jun 5 12:56 README.md
drwxr-xr-x 3 ericboehs staff 102 Jun 5 12:56 bin
drwxr-xr-x 102 ericboehs staff 3468 Jun 5 12:56 examples
-rw-r--r-- 1 ericboehs staff 1888 Jun 5 12:56 third-party.txt

[willian]

I had to remove quietly successfully and now It works!