BranchesTags

Repository files navigation

This file contains very brief instructions on how to install and activate
this plugin on Squeezebox Server.
1. Make sure you're running Linux, and you've enabled inotify support within
your kernel.
2. Make sure you are running Squeezebox Server 7.7 or later - this plugin does
not support earlier versions.
3. Make sure you have Linux::Inotify2 installed in your Perl installation (it's
available through CPAN). I developed and tested this with Linux::Inotify2-1.1.
4. Extract the tar file (being sure to preserve the paths in the tar file), and
copy the resulting AutoRescan directory to your Squeezebox Server plugins
directory. The actual installation location differs depending on the Linux
distribution in usem, but it's likely to be something like:
/usr/local/squeezeboxserver/Plugins
5. Restart Squeezebox Server to make sure it has seen the new plugin.
How to do this differs depending on your Linux distribution, but will be
something like the command '/etc/init.d/squeezeboxserver restart'. Alternatively,
just reboot the server.
6. Make sure the plugin is present and enabled on the 'Server Settings/Extras'
page on the Squeezebox Server web interface.
7. Examine and alter the plugin's settings on the 'Server Settings/Advanced'
page on the Squeezebox Server. However, the default settings should be fine.
TROUBLESHOOTING
1. Check you've got inotify supper enabled in your Linux kernel.
@@HOWTO-check@@
@@TODO: Make sure /proc/sys/fs/inotify exists (indicates INotify compiled in)@@
@@HOWTO-enable@@
2. Check you've got Linux::Inotify2 installed in your perl distribution.
@@HOWTO check@@
@@HOWTO install@@
WINDOWS SPECIALS
Must be running the ActiveState perl version (ie run slimserver.pl directly).
Copyright © Stuart Hickinbottom 2007-2014

About

Plugin for Squeezebox Server to monitor for changes to the music library directly and avoid the need to manual rescan your music collection.

www.hickinbottom.com/autorescan

Resources

Readme
GPL-2.0 license
Activity

Stars

0 stars

Watchers

0 watching

Forks

0 forks
Report repository

Releases

Packages

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { injectUserscript("// Add copy buttons to all 
 blocks\n(function() {\n function addCopyButtons() {\n document.querySelectorAll('pre code').forEach(function(codeBlock) {\n if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;\n codeBlock.parentElement.setAttribute('data-copy-added', 'true');\n \n var btn = document.createElement('button');\n btn.textContent = 'Copy';\n btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';\n btn.onmouseover = function() { this.style.opacity = '1'; };\n btn.onmouseout = function() { this.style.opacity = '0.7'; };\n btn.onclick = function() {\n navigator.clipboard.writeText(codeBlock.textContent).then(function() {\n btn.textContent = 'Copied!';\n setTimeout(function() { btn.textContent = 'Copy'; }, 1500);\n });\n };\n codeBlock.parentElement.style.position = 'relative';\n codeBlock.parentElement.appendChild(btn);\n });\n }\n \n addCopyButtons();\n \n // Re-run on dynamic content\n var observer = new MutationObserver(addCopyButtons);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Add Copy Buttons to Code Blocks");
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content
BranchesTags
Repository files navigation
This file contains very brief instructions on how to install and activate
this plugin on Squeezebox Server.
1. Make sure you're running Linux, and you've enabled inotify support within
your kernel.
2. Make sure you are running Squeezebox Server 7.7 or later - this plugin does
not support earlier versions.
3. Make sure you have Linux::Inotify2 installed in your Perl installation (it's
available through CPAN). I developed and tested this with Linux::Inotify2-1.1.
4. Extract the tar file (being sure to preserve the paths in the tar file), and
copy the resulting AutoRescan directory to your Squeezebox Server plugins
directory. The actual installation location differs depending on the Linux
distribution in usem, but it's likely to be something like:
/usr/local/squeezeboxserver/Plugins
5. Restart Squeezebox Server to make sure it has seen the new plugin.
How to do this differs depending on your Linux distribution, but will be
something like the command '/etc/init.d/squeezeboxserver restart'. Alternatively,
just reboot the server.
6. Make sure the plugin is present and enabled on the 'Server Settings/Extras'
page on the Squeezebox Server web interface.
7. Examine and alter the plugin's settings on the 'Server Settings/Advanced'
page on the Squeezebox Server. However, the default settings should be fine.
TROUBLESHOOTING
1. Check you've got inotify supper enabled in your Linux kernel.
@@HOWTO-check@@
@@TODO: Make sure /proc/sys/fs/inotify exists (indicates INotify compiled in)@@
@@HOWTO-enable@@
2. Check you've got Linux::Inotify2 installed in your perl distribution.
@@HOWTO check@@
@@HOWTO install@@
WINDOWS SPECIALS
Must be running the ActiveState perl version (ie run slimserver.pl directly).
Copyright © Stuart Hickinbottom 2007-2014

About
Plugin for Squeezebox Server to monitor for changes to the music library directly and avoid the need to manual rescan your music collection.
www.hickinbottom.com/autorescan
Resources
Readme
GPL-2.0 license
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Force GitHub README to respect dark mode\n(function() {\n var style = document.createElement('style');\n style.textContent = '\n .markdown-body {\n color-scheme: dark light;\n }\n .markdown-body pre { background: #161b22 !important; }\n .markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }\n .markdown-body table th, .markdown-body table td { border-color: #30363d !important; }\n .markdown-body img { background: #0d1117; }\n .markdown-body blockquote { border-left-color: #8b949e; }\n .markdown-body hr { border-color: #30363d; }\n ';\n document.head.appendChild(style);\n})();", "GitHub Dark Mode README Fix");
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
This file contains very brief instructions on how to install and activate
this plugin on Squeezebox Server.
1. Make sure you're running Linux, and you've enabled inotify support within
your kernel.
2. Make sure you are running Squeezebox Server 7.7 or later - this plugin does
not support earlier versions.
3. Make sure you have Linux::Inotify2 installed in your Perl installation (it's
available through CPAN). I developed and tested this with Linux::Inotify2-1.1.
4. Extract the tar file (being sure to preserve the paths in the tar file), and
copy the resulting AutoRescan directory to your Squeezebox Server plugins
directory. The actual installation location differs depending on the Linux
distribution in usem, but it's likely to be something like:
/usr/local/squeezeboxserver/Plugins
5. Restart Squeezebox Server to make sure it has seen the new plugin.
How to do this differs depending on your Linux distribution, but will be
something like the command '/etc/init.d/squeezeboxserver restart'. Alternatively,
just reboot the server.
6. Make sure the plugin is present and enabled on the 'Server Settings/Extras'
page on the Squeezebox Server web interface.
7. Examine and alter the plugin's settings on the 'Server Settings/Advanced'
page on the Squeezebox Server. However, the default settings should be fine.
TROUBLESHOOTING
1. Check you've got inotify supper enabled in your Linux kernel.
@@HOWTO-check@@
@@TODO: Make sure /proc/sys/fs/inotify exists (indicates INotify compiled in)@@
@@HOWTO-enable@@
2. Check you've got Linux::Inotify2 installed in your perl distribution.
@@HOWTO check@@
@@HOWTO install@@
WINDOWS SPECIALS
Must be running the ActiveState perl version (ie run slimserver.pl directly).
Copyright © Stuart Hickinbottom 2007-2014

About
Plugin for Squeezebox Server to monitor for changes to the music library directly and avoid the need to manual rescan your music collection.
www.hickinbottom.com/autorescan
Resources
Readme
GPL-2.0 license
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Highlight search terms from Google/DuckDuckGo/Bing referrer\n(function() {\n var ref = document.referrer;\n var terms = [];\n \n if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {\n var url = new URL(ref);\n var q = url.searchParams.get('q') || url.searchParams.get('p');\n if (q) {\n terms = q.split(/\\s+/).filter(function(t) { return t.length > 2; });\n }\n }\n \n if (terms.length === 0) return;\n \n var style = document.createElement('style');\n style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';\n document.head.appendChild(style);\n \n function highlight(node) {\n if (node.nodeType === 3) { // text node\n var text = node.textContent;\n var found = false;\n terms.forEach(function(term) {\n var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\\]\\\\]/g, '\\\\') + ')', 'gi');\n if (regex.test(text)) {\n found = true;\n var frag = document.createDocumentFragment();\n var parts = text.split(regex);\n parts.forEach(function(part, i) {\n if (i % 2 === 0) {\n frag.appendChild(document.createTextNode(part));\n } else {\n var span = document.createElement('span');\n span.className = 'userscript-highlight';\n span.textContent = part;\n frag.appendChild(span);\n }\n });\n node.parentNode.replaceChild(frag, node);\n }\n });\n } else if (node.nodeType === 1 && node.childNodes) { // element\n var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];\n if (!skipTags.includes(node.tagName)) {\n Array.from(node.childNodes).forEach(highlight);\n }\n }\n }\n \n highlight(document.body);\n \n // Re-highlight on dynamic content\n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1 || node.nodeType === 3) highlight(node);\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Highlight Search Terms");
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
This file contains very brief instructions on how to install and activate
this plugin on Squeezebox Server.
1. Make sure you're running Linux, and you've enabled inotify support within
your kernel.
2. Make sure you are running Squeezebox Server 7.7 or later - this plugin does
not support earlier versions.
3. Make sure you have Linux::Inotify2 installed in your Perl installation (it's
available through CPAN). I developed and tested this with Linux::Inotify2-1.1.
4. Extract the tar file (being sure to preserve the paths in the tar file), and
copy the resulting AutoRescan directory to your Squeezebox Server plugins
directory. The actual installation location differs depending on the Linux
distribution in usem, but it's likely to be something like:
/usr/local/squeezeboxserver/Plugins
5. Restart Squeezebox Server to make sure it has seen the new plugin.
How to do this differs depending on your Linux distribution, but will be
something like the command '/etc/init.d/squeezeboxserver restart'. Alternatively,
just reboot the server.
6. Make sure the plugin is present and enabled on the 'Server Settings/Extras'
page on the Squeezebox Server web interface.
7. Examine and alter the plugin's settings on the 'Server Settings/Advanced'
page on the Squeezebox Server. However, the default settings should be fine.
TROUBLESHOOTING
1. Check you've got inotify supper enabled in your Linux kernel.
@@HOWTO-check@@
@@TODO: Make sure /proc/sys/fs/inotify exists (indicates INotify compiled in)@@
@@HOWTO-enable@@
2. Check you've got Linux::Inotify2 installed in your perl distribution.
@@HOWTO check@@
@@HOWTO install@@
WINDOWS SPECIALS
Must be running the ActiveState perl version (ie run slimserver.pl directly).
Copyright © Stuart Hickinbottom 2007-2014

About
Plugin for Squeezebox Server to monitor for changes to the music library directly and avoid the need to manual rescan your music collection.
www.hickinbottom.com/autorescan
Resources
Readme
GPL-2.0 license
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Strip utm_, fbclid, gclid, etc. from all links on page\n(function() {\n var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',\n 'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',\n 'ref', 'ref_src', 'source', 'medium', 'campaign'];\n \n function cleanUrl(url) {\n try {\n var u = new URL(url, window.location.origin);\n var changed = false;\n trackingParams.forEach(function(p) {\n if (u.searchParams.has(p)) {\n u.searchParams.delete(p);\n changed = true;\n }\n });\n return changed ? u.toString() : url;\n } catch (e) {\n return url;\n }\n }\n \n function cleanLinks() {\n document.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n \n cleanLinks();\n \n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1) {\n if (node.tagName === 'A') cleanLinks();\n node.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Remove Tracking Parameters from Links");
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content
BranchesTags
Repository files navigation
This file contains very brief instructions on how to install and activate
this plugin on Squeezebox Server.
1. Make sure you're running Linux, and you've enabled inotify support within
your kernel.
2. Make sure you are running Squeezebox Server 7.7 or later - this plugin does
not support earlier versions.
3. Make sure you have Linux::Inotify2 installed in your Perl installation (it's
available through CPAN). I developed and tested this with Linux::Inotify2-1.1.
4. Extract the tar file (being sure to preserve the paths in the tar file), and
copy the resulting AutoRescan directory to your Squeezebox Server plugins
directory. The actual installation location differs depending on the Linux
distribution in usem, but it's likely to be something like:
/usr/local/squeezeboxserver/Plugins
5. Restart Squeezebox Server to make sure it has seen the new plugin.
How to do this differs depending on your Linux distribution, but will be
something like the command '/etc/init.d/squeezeboxserver restart'. Alternatively,
just reboot the server.
6. Make sure the plugin is present and enabled on the 'Server Settings/Extras'
page on the Squeezebox Server web interface.
7. Examine and alter the plugin's settings on the 'Server Settings/Advanced'
page on the Squeezebox Server. However, the default settings should be fine.
TROUBLESHOOTING
1. Check you've got inotify supper enabled in your Linux kernel.
@@HOWTO-check@@
@@TODO: Make sure /proc/sys/fs/inotify exists (indicates INotify compiled in)@@
@@HOWTO-enable@@
2. Check you've got Linux::Inotify2 installed in your perl distribution.
@@HOWTO check@@
@@HOWTO install@@
WINDOWS SPECIALS
Must be running the ActiveState perl version (ie run slimserver.pl directly).
Copyright © Stuart Hickinbottom 2007-2014

About
Plugin for Squeezebox Server to monitor for changes to the music library directly and avoid the need to manual rescan your music collection.
www.hickinbottom.com/autorescan
Resources
Readme
GPL-2.0 license
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Auto-enable theater mode on YouTube\n(function() {\n function tryTheater() {\n var btn = document.querySelector('button[aria-label=\"Theater mode\"], ytd-player #player button[title=\"Theater mode\"]');\n if (btn && !btn.classList.contains('activated')) {\n btn.click();\n }\n }\n \n // Try immediately\n tryTheater();\n \n // Try after navigation (SPA)\n var lastUrl = location.href;\n setInterval(function() {\n if (location.href !== lastUrl) {\n lastUrl = location.href;\n setTimeout(tryTheater, 500);\n }\n }, 1000);\n \n // Also try on player load\n var observer = new MutationObserver(tryTheater);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "YouTube Theater Mode Default");
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
This file contains very brief instructions on how to install and activate
this plugin on Squeezebox Server.
1. Make sure you're running Linux, and you've enabled inotify support within
your kernel.
2. Make sure you are running Squeezebox Server 7.7 or later - this plugin does
not support earlier versions.
3. Make sure you have Linux::Inotify2 installed in your Perl installation (it's
available through CPAN). I developed and tested this with Linux::Inotify2-1.1.
4. Extract the tar file (being sure to preserve the paths in the tar file), and
copy the resulting AutoRescan directory to your Squeezebox Server plugins
directory. The actual installation location differs depending on the Linux
distribution in usem, but it's likely to be something like:
/usr/local/squeezeboxserver/Plugins
5. Restart Squeezebox Server to make sure it has seen the new plugin.
How to do this differs depending on your Linux distribution, but will be
something like the command '/etc/init.d/squeezeboxserver restart'. Alternatively,
just reboot the server.
6. Make sure the plugin is present and enabled on the 'Server Settings/Extras'
page on the Squeezebox Server web interface.
7. Examine and alter the plugin's settings on the 'Server Settings/Advanced'
page on the Squeezebox Server. However, the default settings should be fine.
TROUBLESHOOTING
1. Check you've got inotify supper enabled in your Linux kernel.
@@HOWTO-check@@
@@TODO: Make sure /proc/sys/fs/inotify exists (indicates INotify compiled in)@@
@@HOWTO-enable@@
2. Check you've got Linux::Inotify2 installed in your perl distribution.
@@HOWTO check@@
@@HOWTO install@@
WINDOWS SPECIALS
Must be running the ActiveState perl version (ie run slimserver.pl directly).
Copyright © Stuart Hickinbottom 2007-2014

About
Plugin for Squeezebox Server to monitor for changes to the music library directly and avoid the need to manual rescan your music collection.
www.hickinbottom.com/autorescan
Resources
Readme
GPL-2.0 license
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Remove or un-stick sticky/fixed headers that block content\n(function() {\n function unstick() {\n document.querySelectorAll('header, nav, [role=\"banner\"], .header, .navbar, .sticky, .fixed-top, [style*=\"position: fixed\"], [style*=\"position:sticky\"]').forEach(function(el) {\n if (el.style.position === 'fixed' || el.style.position === 'sticky' || \n getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {\n el.style.position = 'static';\n el.style.top = 'auto';\n el.style.zIndex = 'auto';\n }\n });\n }\n \n unstick();\n \n var observer = new MutationObserver(unstick);\n observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });\n})();", "Kill Sticky Headers");
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
This file contains very brief instructions on how to install and activate
this plugin on Squeezebox Server.
1. Make sure you're running Linux, and you've enabled inotify support within
your kernel.
2. Make sure you are running Squeezebox Server 7.7 or later - this plugin does
not support earlier versions.
3. Make sure you have Linux::Inotify2 installed in your Perl installation (it's
available through CPAN). I developed and tested this with Linux::Inotify2-1.1.
4. Extract the tar file (being sure to preserve the paths in the tar file), and
copy the resulting AutoRescan directory to your Squeezebox Server plugins
directory. The actual installation location differs depending on the Linux
distribution in usem, but it's likely to be something like:
/usr/local/squeezeboxserver/Plugins
5. Restart Squeezebox Server to make sure it has seen the new plugin.
How to do this differs depending on your Linux distribution, but will be
something like the command '/etc/init.d/squeezeboxserver restart'. Alternatively,
just reboot the server.
6. Make sure the plugin is present and enabled on the 'Server Settings/Extras'
page on the Squeezebox Server web interface.
7. Examine and alter the plugin's settings on the 'Server Settings/Advanced'
page on the Squeezebox Server. However, the default settings should be fine.
TROUBLESHOOTING
1. Check you've got inotify supper enabled in your Linux kernel.
@@HOWTO-check@@
@@TODO: Make sure /proc/sys/fs/inotify exists (indicates INotify compiled in)@@
@@HOWTO-enable@@
2. Check you've got Linux::Inotify2 installed in your perl distribution.
@@HOWTO check@@
@@HOWTO install@@
WINDOWS SPECIALS
Must be running the ActiveState perl version (ie run slimserver.pl directly).
Copyright © Stuart Hickinbottom 2007-2014

About
Plugin for Squeezebox Server to monitor for changes to the music library directly and avoid the need to manual rescan your music collection.
www.hickinbottom.com/autorescan
Resources
Readme
GPL-2.0 license
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Universal Dark Mode - works on any site\n(function() {\n var enabled = true;\n \n function applyDarkMode() {\n if (!enabled) return;\n \n // Create style element if it doesn't exist\n var style = document.getElementById('universal-dark-mode-style');\n if (!style) {\n style = document.createElement('style');\n style.id = 'universal-dark-mode-style';\n document.head.appendChild(style);\n }\n \n // Dark mode CSS - inverts colors but preserves images/video\n style.textContent = '\n /* Invert everything except media */\n html {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #1a1a2e !important;\n }\n \n /* Restore images, videos, iframes, canvas */\n img, video, iframe, canvas, svg, picture, [style*=\"background-image\"] {\n filter: invert(1) hue-rotate(180deg) !important;\n }\n \n /* Preserve specific elements that should not be inverted */\n .no-dark-mode, .no-dark-mode *,\n [data-theme=\"light\"], [data-theme=\"light\"],\n .ace_editor, .ace_editor *,\n .CodeMirror, .CodeMirror *,\n .monaco-editor, .monaco-editor *,\n .markdown-body pre, .markdown-body pre *,\n .highlight, .highlight *,\n pre code, pre code * {\n filter: none !important;\n }\n \n /* Fix common UI elements */\n .modal, .popup, .dropdown-menu, .tooltip, .popover {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #2d2d44 !important;\n border-color: #444 !important;\n }\n \n /* Scrollbars */\n ::-webkit-scrollbar { background: #1a1a2e !important; }\n ::-webkit-scrollbar-thumb { background: #444 !important; }\n ::-webkit-scrollbar-thumb:hover { background: #555 !important; }\n \n /* Selection */\n ::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ';\n }\n \n function removeDarkMode() {\n var style = document.getElementById('universal-dark-mode-style');\n if (style) style.remove();\n }\n \n // Toggle with Alt+Shift+D\n document.addEventListener('keydown', function(e) {\n if (e.altKey && e.shiftKey && e.key === 'D') {\n e.preventDefault();\n enabled = !enabled;\n if (enabled) {\n applyDarkMode();\n console.log('[Universal Dark Mode] Enabled');\n } else {\n removeDarkMode();\n console.log('[Universal Dark Mode] Disabled');\n }\n }\n });\n \n // Apply on load\n applyDarkMode();\n \n // Re-apply on dynamic content\n var observer = new MutationObserver(function(mutations) {\n if (enabled && !document.getElementById('universal-dark-mode-style')) {\n applyDarkMode();\n }\n });\n observer.observe(document.head, { childList: true });\n \n console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');\n})();", "Universal Dark Mode");
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content
BranchesTags
Repository files navigation
This file contains very brief instructions on how to install and activate
this plugin on Squeezebox Server.
1. Make sure you're running Linux, and you've enabled inotify support within
your kernel.
2. Make sure you are running Squeezebox Server 7.7 or later - this plugin does
not support earlier versions.
3. Make sure you have Linux::Inotify2 installed in your Perl installation (it's
available through CPAN). I developed and tested this with Linux::Inotify2-1.1.
4. Extract the tar file (being sure to preserve the paths in the tar file), and
copy the resulting AutoRescan directory to your Squeezebox Server plugins
directory. The actual installation location differs depending on the Linux
distribution in usem, but it's likely to be something like:
/usr/local/squeezeboxserver/Plugins
5. Restart Squeezebox Server to make sure it has seen the new plugin.
How to do this differs depending on your Linux distribution, but will be
something like the command '/etc/init.d/squeezeboxserver restart'. Alternatively,
just reboot the server.
6. Make sure the plugin is present and enabled on the 'Server Settings/Extras'
page on the Squeezebox Server web interface.
7. Examine and alter the plugin's settings on the 'Server Settings/Advanced'
page on the Squeezebox Server. However, the default settings should be fine.
TROUBLESHOOTING
1. Check you've got inotify supper enabled in your Linux kernel.
@@HOWTO-check@@
@@TODO: Make sure /proc/sys/fs/inotify exists (indicates INotify compiled in)@@
@@HOWTO-enable@@
2. Check you've got Linux::Inotify2 installed in your perl distribution.
@@HOWTO check@@
@@HOWTO install@@
WINDOWS SPECIALS
Must be running the ActiveState perl version (ie run slimserver.pl directly).
Copyright © Stuart Hickinbottom 2007-2014

About
Plugin for Squeezebox Server to monitor for changes to the music library directly and avoid the need to manual rescan your music collection.
www.hickinbottom.com/autorescan
Resources
Readme
GPL-2.0 license
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages