BranchesTags

Repository files navigation

▶️ 🔴 cli-select

NPMLicense

Simple and interactive solution to provide a list of selectable items on the command line. cli-select preview

Note: cli-select does not produce colored output by default to keep the dependencies at a minimum. See the examples below on how to reproduce this preview.

Table of contents

Installation

npm install --save cli-select

Usage

constcliSelect=require('cli-select');cliSelect(options,callback);

See the configuration section for all available options.

The select list gets immediately rendered when the function gets called and the user can then select an option with the up and down arrow keys. To confirm the selection, just press enter/return. It is also possible to cancel a selection with ctrl+c or esc but it is up to you how you want to handle the cancellation of a selection, the process won't be ended by default.

cli-select supports both, a callback function or a Promise (if your node environment supports promises).

Callback

If the callback function is defined, two parameters will get passed where valueId is the numeric index if values is an array or the object key if values is an object. Both parameters will be null if the selection gets cancelled.

cliSelect(options,(valueId,value)=>{if(valueId!==null){console.log('selected '+valueId+': '+value);}else{console.log('cancelled');}});

Promise

If no callback function is defined, a Promise will be returned:

cliSelect(options).then((response)=>{console.log('selected '+response.id+': '+response.value);}).catch(()=>{console.log('cancelled');});

Configuration

Note: All options are optional except values and will default as specified below.

The configuration gets passed to the cliSelect function as a normal object and can contain the following keys:

cliSelect({/** * All values which can be selected. * This can either be an array or an object with string keys and values. * If an array is specified, the numerical index gets passed to the callback, * if an object is specified, the object key will get passed to the callback. * If you use the `valueRenderer` option, you can also pass in any array/object you want, * the value can be anything as the `valueRenderer` returns the string to render on the terminal. * * @type {array|object} */values: [],/** * The default value which will be pre-selected when the list shows up. * If `values` is an object, the object key can be specified, otherwise * it requires the numerical index in the array. * * @type {number|string} */defaultValue: 0,/** * Symbol which gets rendered if an option is selected. * * @type {string} */selected: '(x)',/** * Symbol which gets rendered if an option is not selected. * * @type {string} */unselected: '( )',/** * If you want an indent before the symbol and options, * you can specify it here with the number of spaces. * * @type {number} */indentation: 0,/** * If true, the list will get removed from the output * once an item gets selected or it gets cancelled. * * @type {boolean} */cleanup: true,/** * If you use a custom object for values or want to render the values differently, * you can overwrite it with a custom function. * The function gets two parameters passed, the value * (which can be a string or your custom object, depending what you have in the `values` option) * and a boolean specifying if the value is selected. * See the examples below for a simple example. * * @type {function} */valueRenderer: (value,selected)=>value,/** * Stream where the output should be written to. * * @type {Stream} */outputStream: process.stdout,/** * Stream to use for the keyboard events. * * @type {Stream} */inputStream: process.stdin,});

Examples

cli-select does not produce colored outputs by default so you can use the package for that which you already have in your project and you don't have two packages doing basically the same at the end. If you don't have such a package already in your project and you want the output to look similar to the preview gif above, I recommend the packages chalk for colored output and figures for unicode symbols with fallbacks. These two packages are also used in the examples below but cli-select is also compatible with every other package.

Custom value renderer

constcliSelect=require('cli-select');constchalk=require('chalk');cliSelect({values: ['Major','Minor','Patch'],valueRenderer: (value,selected)=>{if(selected){returnchalk.underline(value);}returnvalue;},}).then(...);

Todo: more examples, also the one in the preview gif

License

MIT

About

▶️ Simple and interactive solution to provide a list of selectable items on the command line.

Topics

checkboxchooseclidropdownlistradioradiobuttonselectshell

Resources

Readme
License
Activity

Stars

58 stars

Watchers

3 watching

Forks

16 forks
Report repository

Releases

Packages

Used by

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { injectUserscript("// Add copy buttons to all 
 blocks\n(function() {\n function addCopyButtons() {\n document.querySelectorAll('pre code').forEach(function(codeBlock) {\n if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;\n codeBlock.parentElement.setAttribute('data-copy-added', 'true');\n \n var btn = document.createElement('button');\n btn.textContent = 'Copy';\n btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';\n btn.onmouseover = function() { this.style.opacity = '1'; };\n btn.onmouseout = function() { this.style.opacity = '0.7'; };\n btn.onclick = function() {\n navigator.clipboard.writeText(codeBlock.textContent).then(function() {\n btn.textContent = 'Copied!';\n setTimeout(function() { btn.textContent = 'Copy'; }, 1500);\n });\n };\n codeBlock.parentElement.style.position = 'relative';\n codeBlock.parentElement.appendChild(btn);\n });\n }\n \n addCopyButtons();\n \n // Re-run on dynamic content\n var observer = new MutationObserver(addCopyButtons);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Add Copy Buttons to Code Blocks");
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content
BranchesTags
Repository files navigation
▶️ 🔴 cli-select
NPMLicense

Simple and interactive solution to provide a list of selectable items on the command line.
cli-select preview
Note: cli-select does not produce colored output by default to keep the dependencies at a minimum. See the examples below on how to reproduce this preview.
Table of contents
Installation
npm install --save cli-select

Usage
constcliSelect=require('cli-select');cliSelect(options,callback);
See the configuration section for all available options.
The select list gets immediately rendered when the function gets called and the user can then select an option with the up and down arrow keys. To confirm the selection, just press enter/return. It is also possible to cancel a selection with ctrl+c or esc but it is up to you how you want to handle the cancellation of a selection, the process won't be ended by default.
cli-select supports both, a callback function or a Promise (if your node environment supports promises).
Callback
If the callback function is defined, two parameters will get passed where valueId is the numeric index if values is an array or the object key if values is an object. Both parameters will be null if the selection gets cancelled.
cliSelect(options,(valueId,value)=>{if(valueId!==null){console.log('selected '+valueId+': '+value);}else{console.log('cancelled');}});
Promise
If no callback function is defined, a Promise will be returned:
cliSelect(options).then((response)=>{console.log('selected '+response.id+': '+response.value);}).catch(()=>{console.log('cancelled');});
Configuration
Note: All options are optional except values and will default as specified below.
The configuration gets passed to the cliSelect function as a normal object and can contain the following keys:
cliSelect({/** * All values which can be selected. * This can either be an array or an object with string keys and values. * If an array is specified, the numerical index gets passed to the callback, * if an object is specified, the object key will get passed to the callback. * If you use the `valueRenderer` option, you can also pass in any array/object you want, * the value can be anything as the `valueRenderer` returns the string to render on the terminal. * * @type {array|object} */values: [],/** * The default value which will be pre-selected when the list shows up. * If `values` is an object, the object key can be specified, otherwise * it requires the numerical index in the array. * * @type {number|string} */defaultValue: 0,/** * Symbol which gets rendered if an option is selected. * * @type {string} */selected: '(x)',/** * Symbol which gets rendered if an option is not selected. * * @type {string} */unselected: '( )',/** * If you want an indent before the symbol and options, * you can specify it here with the number of spaces. * * @type {number} */indentation: 0,/** * If true, the list will get removed from the output * once an item gets selected or it gets cancelled. * * @type {boolean} */cleanup: true,/** * If you use a custom object for values or want to render the values differently, * you can overwrite it with a custom function. * The function gets two parameters passed, the value * (which can be a string or your custom object, depending what you have in the `values` option) * and a boolean specifying if the value is selected. * See the examples below for a simple example. * * @type {function} */valueRenderer: (value,selected)=>value,/** * Stream where the output should be written to. * * @type {Stream} */outputStream: process.stdout,/** * Stream to use for the keyboard events. * * @type {Stream} */inputStream: process.stdin,});
Examples
cli-select does not produce colored outputs by default so you can use the package for that which you already have in your project and you don't have two packages doing basically the same at the end.
If you don't have such a package already in your project and you want the output to look similar to the preview gif above,
I recommend the packages chalk for colored output and
figures for unicode symbols with fallbacks.
These two packages are also used in the examples below but cli-select is also compatible with every other package.
Custom value renderer
constcliSelect=require('cli-select');constchalk=require('chalk');cliSelect({values: ['Major','Minor','Patch'],valueRenderer: (value,selected)=>{if(selected){returnchalk.underline(value);}returnvalue;},}).then(...);
Todo: more examples, also the one in the preview gif
License
MIT
About
▶️ Simple and interactive solution to provide a list of selectable items on the command line.
Topics
checkboxchooseclidropdownlistradioradiobuttonselectshell
Resources
Readme
License
Activity
Stars
58 stars
Watchers
3 watching
Forks
16 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Force GitHub README to respect dark mode\n(function() {\n var style = document.createElement('style');\n style.textContent = '\n .markdown-body {\n color-scheme: dark light;\n }\n .markdown-body pre { background: #161b22 !important; }\n .markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }\n .markdown-body table th, .markdown-body table td { border-color: #30363d !important; }\n .markdown-body img { background: #0d1117; }\n .markdown-body blockquote { border-left-color: #8b949e; }\n .markdown-body hr { border-color: #30363d; }\n ';\n document.head.appendChild(style);\n})();", "GitHub Dark Mode README Fix");
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
▶️ 🔴 cli-select
NPMLicense

Simple and interactive solution to provide a list of selectable items on the command line.
cli-select preview
Note: cli-select does not produce colored output by default to keep the dependencies at a minimum. See the examples below on how to reproduce this preview.
Table of contents
Installation
npm install --save cli-select

Usage
constcliSelect=require('cli-select');cliSelect(options,callback);
See the configuration section for all available options.
The select list gets immediately rendered when the function gets called and the user can then select an option with the up and down arrow keys. To confirm the selection, just press enter/return. It is also possible to cancel a selection with ctrl+c or esc but it is up to you how you want to handle the cancellation of a selection, the process won't be ended by default.
cli-select supports both, a callback function or a Promise (if your node environment supports promises).
Callback
If the callback function is defined, two parameters will get passed where valueId is the numeric index if values is an array or the object key if values is an object. Both parameters will be null if the selection gets cancelled.
cliSelect(options,(valueId,value)=>{if(valueId!==null){console.log('selected '+valueId+': '+value);}else{console.log('cancelled');}});
Promise
If no callback function is defined, a Promise will be returned:
cliSelect(options).then((response)=>{console.log('selected '+response.id+': '+response.value);}).catch(()=>{console.log('cancelled');});
Configuration
Note: All options are optional except values and will default as specified below.
The configuration gets passed to the cliSelect function as a normal object and can contain the following keys:
cliSelect({/** * All values which can be selected. * This can either be an array or an object with string keys and values. * If an array is specified, the numerical index gets passed to the callback, * if an object is specified, the object key will get passed to the callback. * If you use the `valueRenderer` option, you can also pass in any array/object you want, * the value can be anything as the `valueRenderer` returns the string to render on the terminal. * * @type {array|object} */values: [],/** * The default value which will be pre-selected when the list shows up. * If `values` is an object, the object key can be specified, otherwise * it requires the numerical index in the array. * * @type {number|string} */defaultValue: 0,/** * Symbol which gets rendered if an option is selected. * * @type {string} */selected: '(x)',/** * Symbol which gets rendered if an option is not selected. * * @type {string} */unselected: '( )',/** * If you want an indent before the symbol and options, * you can specify it here with the number of spaces. * * @type {number} */indentation: 0,/** * If true, the list will get removed from the output * once an item gets selected or it gets cancelled. * * @type {boolean} */cleanup: true,/** * If you use a custom object for values or want to render the values differently, * you can overwrite it with a custom function. * The function gets two parameters passed, the value * (which can be a string or your custom object, depending what you have in the `values` option) * and a boolean specifying if the value is selected. * See the examples below for a simple example. * * @type {function} */valueRenderer: (value,selected)=>value,/** * Stream where the output should be written to. * * @type {Stream} */outputStream: process.stdout,/** * Stream to use for the keyboard events. * * @type {Stream} */inputStream: process.stdin,});
Examples
cli-select does not produce colored outputs by default so you can use the package for that which you already have in your project and you don't have two packages doing basically the same at the end.
If you don't have such a package already in your project and you want the output to look similar to the preview gif above,
I recommend the packages chalk for colored output and
figures for unicode symbols with fallbacks.
These two packages are also used in the examples below but cli-select is also compatible with every other package.
Custom value renderer
constcliSelect=require('cli-select');constchalk=require('chalk');cliSelect({values: ['Major','Minor','Patch'],valueRenderer: (value,selected)=>{if(selected){returnchalk.underline(value);}returnvalue;},}).then(...);
Todo: more examples, also the one in the preview gif
License
MIT
About
▶️ Simple and interactive solution to provide a list of selectable items on the command line.
Topics
checkboxchooseclidropdownlistradioradiobuttonselectshell
Resources
Readme
License
Activity
Stars
58 stars
Watchers
3 watching
Forks
16 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Highlight search terms from Google/DuckDuckGo/Bing referrer\n(function() {\n var ref = document.referrer;\n var terms = [];\n \n if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {\n var url = new URL(ref);\n var q = url.searchParams.get('q') || url.searchParams.get('p');\n if (q) {\n terms = q.split(/\\s+/).filter(function(t) { return t.length > 2; });\n }\n }\n \n if (terms.length === 0) return;\n \n var style = document.createElement('style');\n style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';\n document.head.appendChild(style);\n \n function highlight(node) {\n if (node.nodeType === 3) { // text node\n var text = node.textContent;\n var found = false;\n terms.forEach(function(term) {\n var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\\]\\\\]/g, '\\\\') + ')', 'gi');\n if (regex.test(text)) {\n found = true;\n var frag = document.createDocumentFragment();\n var parts = text.split(regex);\n parts.forEach(function(part, i) {\n if (i % 2 === 0) {\n frag.appendChild(document.createTextNode(part));\n } else {\n var span = document.createElement('span');\n span.className = 'userscript-highlight';\n span.textContent = part;\n frag.appendChild(span);\n }\n });\n node.parentNode.replaceChild(frag, node);\n }\n });\n } else if (node.nodeType === 1 && node.childNodes) { // element\n var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];\n if (!skipTags.includes(node.tagName)) {\n Array.from(node.childNodes).forEach(highlight);\n }\n }\n }\n \n highlight(document.body);\n \n // Re-highlight on dynamic content\n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1 || node.nodeType === 3) highlight(node);\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Highlight Search Terms");
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
▶️ 🔴 cli-select
NPMLicense

Simple and interactive solution to provide a list of selectable items on the command line.
cli-select preview
Note: cli-select does not produce colored output by default to keep the dependencies at a minimum. See the examples below on how to reproduce this preview.
Table of contents
Installation
npm install --save cli-select

Usage
constcliSelect=require('cli-select');cliSelect(options,callback);
See the configuration section for all available options.
The select list gets immediately rendered when the function gets called and the user can then select an option with the up and down arrow keys. To confirm the selection, just press enter/return. It is also possible to cancel a selection with ctrl+c or esc but it is up to you how you want to handle the cancellation of a selection, the process won't be ended by default.
cli-select supports both, a callback function or a Promise (if your node environment supports promises).
Callback
If the callback function is defined, two parameters will get passed where valueId is the numeric index if values is an array or the object key if values is an object. Both parameters will be null if the selection gets cancelled.
cliSelect(options,(valueId,value)=>{if(valueId!==null){console.log('selected '+valueId+': '+value);}else{console.log('cancelled');}});
Promise
If no callback function is defined, a Promise will be returned:
cliSelect(options).then((response)=>{console.log('selected '+response.id+': '+response.value);}).catch(()=>{console.log('cancelled');});
Configuration
Note: All options are optional except values and will default as specified below.
The configuration gets passed to the cliSelect function as a normal object and can contain the following keys:
cliSelect({/** * All values which can be selected. * This can either be an array or an object with string keys and values. * If an array is specified, the numerical index gets passed to the callback, * if an object is specified, the object key will get passed to the callback. * If you use the `valueRenderer` option, you can also pass in any array/object you want, * the value can be anything as the `valueRenderer` returns the string to render on the terminal. * * @type {array|object} */values: [],/** * The default value which will be pre-selected when the list shows up. * If `values` is an object, the object key can be specified, otherwise * it requires the numerical index in the array. * * @type {number|string} */defaultValue: 0,/** * Symbol which gets rendered if an option is selected. * * @type {string} */selected: '(x)',/** * Symbol which gets rendered if an option is not selected. * * @type {string} */unselected: '( )',/** * If you want an indent before the symbol and options, * you can specify it here with the number of spaces. * * @type {number} */indentation: 0,/** * If true, the list will get removed from the output * once an item gets selected or it gets cancelled. * * @type {boolean} */cleanup: true,/** * If you use a custom object for values or want to render the values differently, * you can overwrite it with a custom function. * The function gets two parameters passed, the value * (which can be a string or your custom object, depending what you have in the `values` option) * and a boolean specifying if the value is selected. * See the examples below for a simple example. * * @type {function} */valueRenderer: (value,selected)=>value,/** * Stream where the output should be written to. * * @type {Stream} */outputStream: process.stdout,/** * Stream to use for the keyboard events. * * @type {Stream} */inputStream: process.stdin,});
Examples
cli-select does not produce colored outputs by default so you can use the package for that which you already have in your project and you don't have two packages doing basically the same at the end.
If you don't have such a package already in your project and you want the output to look similar to the preview gif above,
I recommend the packages chalk for colored output and
figures for unicode symbols with fallbacks.
These two packages are also used in the examples below but cli-select is also compatible with every other package.
Custom value renderer
constcliSelect=require('cli-select');constchalk=require('chalk');cliSelect({values: ['Major','Minor','Patch'],valueRenderer: (value,selected)=>{if(selected){returnchalk.underline(value);}returnvalue;},}).then(...);
Todo: more examples, also the one in the preview gif
License
MIT
About
▶️ Simple and interactive solution to provide a list of selectable items on the command line.
Topics
checkboxchooseclidropdownlistradioradiobuttonselectshell
Resources
Readme
License
Activity
Stars
58 stars
Watchers
3 watching
Forks
16 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Strip utm_, fbclid, gclid, etc. from all links on page\n(function() {\n var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',\n 'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',\n 'ref', 'ref_src', 'source', 'medium', 'campaign'];\n \n function cleanUrl(url) {\n try {\n var u = new URL(url, window.location.origin);\n var changed = false;\n trackingParams.forEach(function(p) {\n if (u.searchParams.has(p)) {\n u.searchParams.delete(p);\n changed = true;\n }\n });\n return changed ? u.toString() : url;\n } catch (e) {\n return url;\n }\n }\n \n function cleanLinks() {\n document.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n \n cleanLinks();\n \n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1) {\n if (node.tagName === 'A') cleanLinks();\n node.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Remove Tracking Parameters from Links");
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content
BranchesTags
Repository files navigation
▶️ 🔴 cli-select
NPMLicense

Simple and interactive solution to provide a list of selectable items on the command line.
cli-select preview
Note: cli-select does not produce colored output by default to keep the dependencies at a minimum. See the examples below on how to reproduce this preview.
Table of contents
Installation
npm install --save cli-select

Usage
constcliSelect=require('cli-select');cliSelect(options,callback);
See the configuration section for all available options.
The select list gets immediately rendered when the function gets called and the user can then select an option with the up and down arrow keys. To confirm the selection, just press enter/return. It is also possible to cancel a selection with ctrl+c or esc but it is up to you how you want to handle the cancellation of a selection, the process won't be ended by default.
cli-select supports both, a callback function or a Promise (if your node environment supports promises).
Callback
If the callback function is defined, two parameters will get passed where valueId is the numeric index if values is an array or the object key if values is an object. Both parameters will be null if the selection gets cancelled.
cliSelect(options,(valueId,value)=>{if(valueId!==null){console.log('selected '+valueId+': '+value);}else{console.log('cancelled');}});
Promise
If no callback function is defined, a Promise will be returned:
cliSelect(options).then((response)=>{console.log('selected '+response.id+': '+response.value);}).catch(()=>{console.log('cancelled');});
Configuration
Note: All options are optional except values and will default as specified below.
The configuration gets passed to the cliSelect function as a normal object and can contain the following keys:
cliSelect({/** * All values which can be selected. * This can either be an array or an object with string keys and values. * If an array is specified, the numerical index gets passed to the callback, * if an object is specified, the object key will get passed to the callback. * If you use the `valueRenderer` option, you can also pass in any array/object you want, * the value can be anything as the `valueRenderer` returns the string to render on the terminal. * * @type {array|object} */values: [],/** * The default value which will be pre-selected when the list shows up. * If `values` is an object, the object key can be specified, otherwise * it requires the numerical index in the array. * * @type {number|string} */defaultValue: 0,/** * Symbol which gets rendered if an option is selected. * * @type {string} */selected: '(x)',/** * Symbol which gets rendered if an option is not selected. * * @type {string} */unselected: '( )',/** * If you want an indent before the symbol and options, * you can specify it here with the number of spaces. * * @type {number} */indentation: 0,/** * If true, the list will get removed from the output * once an item gets selected or it gets cancelled. * * @type {boolean} */cleanup: true,/** * If you use a custom object for values or want to render the values differently, * you can overwrite it with a custom function. * The function gets two parameters passed, the value * (which can be a string or your custom object, depending what you have in the `values` option) * and a boolean specifying if the value is selected. * See the examples below for a simple example. * * @type {function} */valueRenderer: (value,selected)=>value,/** * Stream where the output should be written to. * * @type {Stream} */outputStream: process.stdout,/** * Stream to use for the keyboard events. * * @type {Stream} */inputStream: process.stdin,});
Examples
cli-select does not produce colored outputs by default so you can use the package for that which you already have in your project and you don't have two packages doing basically the same at the end.
If you don't have such a package already in your project and you want the output to look similar to the preview gif above,
I recommend the packages chalk for colored output and
figures for unicode symbols with fallbacks.
These two packages are also used in the examples below but cli-select is also compatible with every other package.
Custom value renderer
constcliSelect=require('cli-select');constchalk=require('chalk');cliSelect({values: ['Major','Minor','Patch'],valueRenderer: (value,selected)=>{if(selected){returnchalk.underline(value);}returnvalue;},}).then(...);
Todo: more examples, also the one in the preview gif
License
MIT
About
▶️ Simple and interactive solution to provide a list of selectable items on the command line.
Topics
checkboxchooseclidropdownlistradioradiobuttonselectshell
Resources
Readme
License
Activity
Stars
58 stars
Watchers
3 watching
Forks
16 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Auto-enable theater mode on YouTube\n(function() {\n function tryTheater() {\n var btn = document.querySelector('button[aria-label=\"Theater mode\"], ytd-player #player button[title=\"Theater mode\"]');\n if (btn && !btn.classList.contains('activated')) {\n btn.click();\n }\n }\n \n // Try immediately\n tryTheater();\n \n // Try after navigation (SPA)\n var lastUrl = location.href;\n setInterval(function() {\n if (location.href !== lastUrl) {\n lastUrl = location.href;\n setTimeout(tryTheater, 500);\n }\n }, 1000);\n \n // Also try on player load\n var observer = new MutationObserver(tryTheater);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "YouTube Theater Mode Default");
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
▶️ 🔴 cli-select
NPMLicense

Simple and interactive solution to provide a list of selectable items on the command line.
cli-select preview
Note: cli-select does not produce colored output by default to keep the dependencies at a minimum. See the examples below on how to reproduce this preview.
Table of contents
Installation
npm install --save cli-select

Usage
constcliSelect=require('cli-select');cliSelect(options,callback);
See the configuration section for all available options.
The select list gets immediately rendered when the function gets called and the user can then select an option with the up and down arrow keys. To confirm the selection, just press enter/return. It is also possible to cancel a selection with ctrl+c or esc but it is up to you how you want to handle the cancellation of a selection, the process won't be ended by default.
cli-select supports both, a callback function or a Promise (if your node environment supports promises).
Callback
If the callback function is defined, two parameters will get passed where valueId is the numeric index if values is an array or the object key if values is an object. Both parameters will be null if the selection gets cancelled.
cliSelect(options,(valueId,value)=>{if(valueId!==null){console.log('selected '+valueId+': '+value);}else{console.log('cancelled');}});
Promise
If no callback function is defined, a Promise will be returned:
cliSelect(options).then((response)=>{console.log('selected '+response.id+': '+response.value);}).catch(()=>{console.log('cancelled');});
Configuration
Note: All options are optional except values and will default as specified below.
The configuration gets passed to the cliSelect function as a normal object and can contain the following keys:
cliSelect({/** * All values which can be selected. * This can either be an array or an object with string keys and values. * If an array is specified, the numerical index gets passed to the callback, * if an object is specified, the object key will get passed to the callback. * If you use the `valueRenderer` option, you can also pass in any array/object you want, * the value can be anything as the `valueRenderer` returns the string to render on the terminal. * * @type {array|object} */values: [],/** * The default value which will be pre-selected when the list shows up. * If `values` is an object, the object key can be specified, otherwise * it requires the numerical index in the array. * * @type {number|string} */defaultValue: 0,/** * Symbol which gets rendered if an option is selected. * * @type {string} */selected: '(x)',/** * Symbol which gets rendered if an option is not selected. * * @type {string} */unselected: '( )',/** * If you want an indent before the symbol and options, * you can specify it here with the number of spaces. * * @type {number} */indentation: 0,/** * If true, the list will get removed from the output * once an item gets selected or it gets cancelled. * * @type {boolean} */cleanup: true,/** * If you use a custom object for values or want to render the values differently, * you can overwrite it with a custom function. * The function gets two parameters passed, the value * (which can be a string or your custom object, depending what you have in the `values` option) * and a boolean specifying if the value is selected. * See the examples below for a simple example. * * @type {function} */valueRenderer: (value,selected)=>value,/** * Stream where the output should be written to. * * @type {Stream} */outputStream: process.stdout,/** * Stream to use for the keyboard events. * * @type {Stream} */inputStream: process.stdin,});
Examples
cli-select does not produce colored outputs by default so you can use the package for that which you already have in your project and you don't have two packages doing basically the same at the end.
If you don't have such a package already in your project and you want the output to look similar to the preview gif above,
I recommend the packages chalk for colored output and
figures for unicode symbols with fallbacks.
These two packages are also used in the examples below but cli-select is also compatible with every other package.
Custom value renderer
constcliSelect=require('cli-select');constchalk=require('chalk');cliSelect({values: ['Major','Minor','Patch'],valueRenderer: (value,selected)=>{if(selected){returnchalk.underline(value);}returnvalue;},}).then(...);
Todo: more examples, also the one in the preview gif
License
MIT
About
▶️ Simple and interactive solution to provide a list of selectable items on the command line.
Topics
checkboxchooseclidropdownlistradioradiobuttonselectshell
Resources
Readme
License
Activity
Stars
58 stars
Watchers
3 watching
Forks
16 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Remove or un-stick sticky/fixed headers that block content\n(function() {\n function unstick() {\n document.querySelectorAll('header, nav, [role=\"banner\"], .header, .navbar, .sticky, .fixed-top, [style*=\"position: fixed\"], [style*=\"position:sticky\"]').forEach(function(el) {\n if (el.style.position === 'fixed' || el.style.position === 'sticky' || \n getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {\n el.style.position = 'static';\n el.style.top = 'auto';\n el.style.zIndex = 'auto';\n }\n });\n }\n \n unstick();\n \n var observer = new MutationObserver(unstick);\n observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });\n})();", "Kill Sticky Headers");
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
▶️ 🔴 cli-select
NPMLicense

Simple and interactive solution to provide a list of selectable items on the command line.
cli-select preview
Note: cli-select does not produce colored output by default to keep the dependencies at a minimum. See the examples below on how to reproduce this preview.
Table of contents
Installation
npm install --save cli-select

Usage
constcliSelect=require('cli-select');cliSelect(options,callback);
See the configuration section for all available options.
The select list gets immediately rendered when the function gets called and the user can then select an option with the up and down arrow keys. To confirm the selection, just press enter/return. It is also possible to cancel a selection with ctrl+c or esc but it is up to you how you want to handle the cancellation of a selection, the process won't be ended by default.
cli-select supports both, a callback function or a Promise (if your node environment supports promises).
Callback
If the callback function is defined, two parameters will get passed where valueId is the numeric index if values is an array or the object key if values is an object. Both parameters will be null if the selection gets cancelled.
cliSelect(options,(valueId,value)=>{if(valueId!==null){console.log('selected '+valueId+': '+value);}else{console.log('cancelled');}});
Promise
If no callback function is defined, a Promise will be returned:
cliSelect(options).then((response)=>{console.log('selected '+response.id+': '+response.value);}).catch(()=>{console.log('cancelled');});
Configuration
Note: All options are optional except values and will default as specified below.
The configuration gets passed to the cliSelect function as a normal object and can contain the following keys:
cliSelect({/** * All values which can be selected. * This can either be an array or an object with string keys and values. * If an array is specified, the numerical index gets passed to the callback, * if an object is specified, the object key will get passed to the callback. * If you use the `valueRenderer` option, you can also pass in any array/object you want, * the value can be anything as the `valueRenderer` returns the string to render on the terminal. * * @type {array|object} */values: [],/** * The default value which will be pre-selected when the list shows up. * If `values` is an object, the object key can be specified, otherwise * it requires the numerical index in the array. * * @type {number|string} */defaultValue: 0,/** * Symbol which gets rendered if an option is selected. * * @type {string} */selected: '(x)',/** * Symbol which gets rendered if an option is not selected. * * @type {string} */unselected: '( )',/** * If you want an indent before the symbol and options, * you can specify it here with the number of spaces. * * @type {number} */indentation: 0,/** * If true, the list will get removed from the output * once an item gets selected or it gets cancelled. * * @type {boolean} */cleanup: true,/** * If you use a custom object for values or want to render the values differently, * you can overwrite it with a custom function. * The function gets two parameters passed, the value * (which can be a string or your custom object, depending what you have in the `values` option) * and a boolean specifying if the value is selected. * See the examples below for a simple example. * * @type {function} */valueRenderer: (value,selected)=>value,/** * Stream where the output should be written to. * * @type {Stream} */outputStream: process.stdout,/** * Stream to use for the keyboard events. * * @type {Stream} */inputStream: process.stdin,});
Examples
cli-select does not produce colored outputs by default so you can use the package for that which you already have in your project and you don't have two packages doing basically the same at the end.
If you don't have such a package already in your project and you want the output to look similar to the preview gif above,
I recommend the packages chalk for colored output and
figures for unicode symbols with fallbacks.
These two packages are also used in the examples below but cli-select is also compatible with every other package.
Custom value renderer
constcliSelect=require('cli-select');constchalk=require('chalk');cliSelect({values: ['Major','Minor','Patch'],valueRenderer: (value,selected)=>{if(selected){returnchalk.underline(value);}returnvalue;},}).then(...);
Todo: more examples, also the one in the preview gif
License
MIT
About
▶️ Simple and interactive solution to provide a list of selectable items on the command line.
Topics
checkboxchooseclidropdownlistradioradiobuttonselectshell
Resources
Readme
License
Activity
Stars
58 stars
Watchers
3 watching
Forks
16 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Universal Dark Mode - works on any site\n(function() {\n var enabled = true;\n \n function applyDarkMode() {\n if (!enabled) return;\n \n // Create style element if it doesn't exist\n var style = document.getElementById('universal-dark-mode-style');\n if (!style) {\n style = document.createElement('style');\n style.id = 'universal-dark-mode-style';\n document.head.appendChild(style);\n }\n \n // Dark mode CSS - inverts colors but preserves images/video\n style.textContent = '\n /* Invert everything except media */\n html {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #1a1a2e !important;\n }\n \n /* Restore images, videos, iframes, canvas */\n img, video, iframe, canvas, svg, picture, [style*=\"background-image\"] {\n filter: invert(1) hue-rotate(180deg) !important;\n }\n \n /* Preserve specific elements that should not be inverted */\n .no-dark-mode, .no-dark-mode *,\n [data-theme=\"light\"], [data-theme=\"light\"],\n .ace_editor, .ace_editor *,\n .CodeMirror, .CodeMirror *,\n .monaco-editor, .monaco-editor *,\n .markdown-body pre, .markdown-body pre *,\n .highlight, .highlight *,\n pre code, pre code * {\n filter: none !important;\n }\n \n /* Fix common UI elements */\n .modal, .popup, .dropdown-menu, .tooltip, .popover {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #2d2d44 !important;\n border-color: #444 !important;\n }\n \n /* Scrollbars */\n ::-webkit-scrollbar { background: #1a1a2e !important; }\n ::-webkit-scrollbar-thumb { background: #444 !important; }\n ::-webkit-scrollbar-thumb:hover { background: #555 !important; }\n \n /* Selection */\n ::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ';\n }\n \n function removeDarkMode() {\n var style = document.getElementById('universal-dark-mode-style');\n if (style) style.remove();\n }\n \n // Toggle with Alt+Shift+D\n document.addEventListener('keydown', function(e) {\n if (e.altKey && e.shiftKey && e.key === 'D') {\n e.preventDefault();\n enabled = !enabled;\n if (enabled) {\n applyDarkMode();\n console.log('[Universal Dark Mode] Enabled');\n } else {\n removeDarkMode();\n console.log('[Universal Dark Mode] Disabled');\n }\n }\n });\n \n // Apply on load\n applyDarkMode();\n \n // Re-apply on dynamic content\n var observer = new MutationObserver(function(mutations) {\n if (enabled && !document.getElementById('universal-dark-mode-style')) {\n applyDarkMode();\n }\n });\n observer.observe(document.head, { childList: true });\n \n console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');\n})();", "Universal Dark Mode");
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content
BranchesTags
Repository files navigation
▶️ 🔴 cli-select
NPMLicense

Simple and interactive solution to provide a list of selectable items on the command line.
cli-select preview
Note: cli-select does not produce colored output by default to keep the dependencies at a minimum. See the examples below on how to reproduce this preview.
Table of contents
Installation
npm install --save cli-select

Usage
constcliSelect=require('cli-select');cliSelect(options,callback);
See the configuration section for all available options.
The select list gets immediately rendered when the function gets called and the user can then select an option with the up and down arrow keys. To confirm the selection, just press enter/return. It is also possible to cancel a selection with ctrl+c or esc but it is up to you how you want to handle the cancellation of a selection, the process won't be ended by default.
cli-select supports both, a callback function or a Promise (if your node environment supports promises).
Callback
If the callback function is defined, two parameters will get passed where valueId is the numeric index if values is an array or the object key if values is an object. Both parameters will be null if the selection gets cancelled.
cliSelect(options,(valueId,value)=>{if(valueId!==null){console.log('selected '+valueId+': '+value);}else{console.log('cancelled');}});
Promise
If no callback function is defined, a Promise will be returned:
cliSelect(options).then((response)=>{console.log('selected '+response.id+': '+response.value);}).catch(()=>{console.log('cancelled');});
Configuration
Note: All options are optional except values and will default as specified below.
The configuration gets passed to the cliSelect function as a normal object and can contain the following keys:
cliSelect({/** * All values which can be selected. * This can either be an array or an object with string keys and values. * If an array is specified, the numerical index gets passed to the callback, * if an object is specified, the object key will get passed to the callback. * If you use the `valueRenderer` option, you can also pass in any array/object you want, * the value can be anything as the `valueRenderer` returns the string to render on the terminal. * * @type {array|object} */values: [],/** * The default value which will be pre-selected when the list shows up. * If `values` is an object, the object key can be specified, otherwise * it requires the numerical index in the array. * * @type {number|string} */defaultValue: 0,/** * Symbol which gets rendered if an option is selected. * * @type {string} */selected: '(x)',/** * Symbol which gets rendered if an option is not selected. * * @type {string} */unselected: '( )',/** * If you want an indent before the symbol and options, * you can specify it here with the number of spaces. * * @type {number} */indentation: 0,/** * If true, the list will get removed from the output * once an item gets selected or it gets cancelled. * * @type {boolean} */cleanup: true,/** * If you use a custom object for values or want to render the values differently, * you can overwrite it with a custom function. * The function gets two parameters passed, the value * (which can be a string or your custom object, depending what you have in the `values` option) * and a boolean specifying if the value is selected. * See the examples below for a simple example. * * @type {function} */valueRenderer: (value,selected)=>value,/** * Stream where the output should be written to. * * @type {Stream} */outputStream: process.stdout,/** * Stream to use for the keyboard events. * * @type {Stream} */inputStream: process.stdin,});
Examples
cli-select does not produce colored outputs by default so you can use the package for that which you already have in your project and you don't have two packages doing basically the same at the end.
If you don't have such a package already in your project and you want the output to look similar to the preview gif above,
I recommend the packages chalk for colored output and
figures for unicode symbols with fallbacks.
These two packages are also used in the examples below but cli-select is also compatible with every other package.
Custom value renderer
constcliSelect=require('cli-select');constchalk=require('chalk');cliSelect({values: ['Major','Minor','Patch'],valueRenderer: (value,selected)=>{if(selected){returnchalk.underline(value);}returnvalue;},}).then(...);
Todo: more examples, also the one in the preview gif
License
MIT
About
▶️ Simple and interactive solution to provide a list of selectable items on the command line.
Topics
checkboxchooseclidropdownlistradioradiobuttonselectshell
Resources
Readme
License
Activity
Stars
58 stars
Watchers
3 watching
Forks
16 forks
Report repository
Releases
Packages
Used by
Contributors
Languages