Skip to content
BranchesTags

Repository files navigation

Ruby ParseConfig Library

ParseConfig provides simple parsing of standard configuration files in the form of param = value. It also supports nested [group] sections.

Continuous Integration Status

Installation

$ gem install parseconfig

Gemfile

gem 'parseconfig'

Usage

An example configuration file might look like:

# Example Config
param1 = value1
param2 = value2
[group1]
group1_param1 = group1_value1
group1_param2 = group1_value2
[group2]
group2_param1 = group2_value1
group2_param2 = group2_value2

Access it with ParseConfig:

>> require'parseconfig'=>true
>> config=ParseConfig.new('/path/to/config/example.conf')=>#<ParseConfig:0x102410908@config_file="example.conf",@groups=["group1","group2"],@params={"param1"=>"value1""param2"=>"value2",
"group1"=>{"param1"=>"value1""param2"=>"value2",
},"group2"=>{"param1"=>"value1""param2"=>"value2",
},}>
>> config.get_params=>["param1","param2","group1","group2"]
>> config['param1']=>"value1"
>> config.get_groups=>["group1","group2"]
>> config['group1']=>{"group1_param1"=>"group1_value1","group1_param2"=>"group1_value2"}
>> config['group1']['group1_param1']=>"group1_value1"
>> file=File.open('/path/to/config/file','w')=>#<File:file>
>> config.write(file)=>[]
>> file.close=>nil

Development

Docker

This project includes a docker-compose configuration that sets up all required services, and dependencies for development and testing. This is the recommended path for local development, and is the only fully supported option.

The following creates all required docker containers, and launches a BASH shell within the parseconfig dev container for development.

$ make dev
|> parseconfig <| src #

The above is the equivalent of running:

$ docker-compose up -d
$ docker-compose exec parseconfig /bin/bash

Testing Alternative Versions of Ruby

The latest stable version of Ruby is the default, and target version accessible as the parseconfig container within Docker Compose. For testing against alternative versions of Ruby, additional containers are created (ex: parseconfig-rb26, parseconfig-rb27, etc). You can access these containers via:

$ docker-compose ps
Name Command State Ports
---------------------------------------------------------------
ruby-parseconfig_parseconfig-rb26_1 /bin/bash Up
ruby-parseconfig_parseconfig-rb27_1 /bin/bash Up
ruby-parseconfig_parseconfig-rb30_1 /bin/bash Up
ruby-parseconfig_parseconfig_1 /bin/bash Up
$ docker-compose exec parseconfig-rb26 /bin/bash
|> parseconfig-rb26 <| src #

Running Unit Tests

$ make test

License

The ParseConfig library is Open Source and distributed under the MIT license. Please see the LICENSE file included with this software.

About

Ruby Config File Parser for Standard Unix/Linux Type Config Files

Resources

Readme
MIT license
Activity
Custom properties

Stars

98 stars

Watchers

4 watching

Forks

26 forks
Report repository

Releases

Packages

Used by

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { // Add copy buttons to all 
 blocks
(function() {
function addCopyButtons() {
document.querySelectorAll('pre code').forEach(function(codeBlock) {
if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;
codeBlock.parentElement.setAttribute('data-copy-added', 'true');
var btn = document.createElement('button');
btn.textContent = 'Copy';
btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';
btn.onmouseover = function() { this.style.opacity = '1'; };
btn.onmouseout = function() { this.style.opacity = '0.7'; };
btn.onclick = function() {
navigator.clipboard.writeText(codeBlock.textContent).then(function() {
btn.textContent = 'Copied!';
setTimeout(function() { btn.textContent = 'Copy'; }, 1500);
});
};
codeBlock.parentElement.style.position = 'relative';
codeBlock.parentElement.appendChild(btn);
});
}
addCopyButtons();
// Re-run on dynamic content
var observer = new MutationObserver(addCopyButtons);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '
GitHub - datafolklabs/ruby-parseconfig: Ruby Config File Parser for Standard Unix/Linux Type Config Files · GitHub
Skip to content
BranchesTags
Repository files navigation
Ruby ParseConfig Library
ParseConfig provides simple parsing of standard configuration files in the
form of param = value. It also supports nested [group] sections.
Continuous Integration Status
Installation
$ gem install parseconfig

Gemfile
gem 'parseconfig'

Usage
An example configuration file might look like:
# Example Config
param1 = value1
param2 = value2
[group1]
group1_param1 = group1_value1
group1_param2 = group1_value2
[group2]
group2_param1 = group2_value1
group2_param2 = group2_value2

Access it with ParseConfig:
>> require'parseconfig'=>true
>> config=ParseConfig.new('/path/to/config/example.conf')=>#<ParseConfig:0x102410908@config_file="example.conf",@groups=["group1","group2"],@params={"param1"=>"value1""param2"=>"value2",
"group1"=>{"param1"=>"value1""param2"=>"value2",
},"group2"=>{"param1"=>"value1""param2"=>"value2",
},}>
>> config.get_params=>["param1","param2","group1","group2"]
>> config['param1']=>"value1"
>> config.get_groups=>["group1","group2"]
>> config['group1']=>{"group1_param1"=>"group1_value1","group1_param2"=>"group1_value2"}
>> config['group1']['group1_param1']=>"group1_value1"
>> file=File.open('/path/to/config/file','w')=>#<File:file>
>> config.write(file)=>[]
>> file.close=>nil
Development
Docker
This project includes a docker-compose configuration that sets up all required services, and dependencies for development and testing. This is the recommended path for local development, and is the only fully supported option.
The following creates all required docker containers, and launches a BASH shell within the parseconfig dev container for development.
$ make dev
|> parseconfig <| src #

The above is the equivalent of running:
$ docker-compose up -d
$ docker-compose exec parseconfig /bin/bash

Testing Alternative Versions of Ruby
The latest stable version of Ruby is the default, and target version accessible as the parseconfig container within Docker Compose. For testing against alternative versions of Ruby, additional containers are created (ex: parseconfig-rb26, parseconfig-rb27, etc). You can access these containers via:
$ docker-compose ps
Name Command State Ports
---------------------------------------------------------------
ruby-parseconfig_parseconfig-rb26_1 /bin/bash Up
ruby-parseconfig_parseconfig-rb27_1 /bin/bash Up
ruby-parseconfig_parseconfig-rb30_1 /bin/bash Up
ruby-parseconfig_parseconfig_1 /bin/bash Up
$ docker-compose exec parseconfig-rb26 /bin/bash
|> parseconfig-rb26 <| src #

Running Unit Tests
$ make test

License
The ParseConfig library is Open Source and distributed under the MIT license.
Please see the LICENSE file included with this software.
About
Ruby Config File Parser for Standard Unix/Linux Type Config Files
Resources
Readme
MIT license
Activity
Custom properties
Stars
98 stars
Watchers
4 watching
Forks
26 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Force GitHub README to respect dark mode
(function() {
var style = document.createElement('style');
style.textContent = '
.markdown-body {
color-scheme: dark light;
}
.markdown-body pre { background: #161b22 !important; }
.markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }
.markdown-body table th, .markdown-body table td { border-color: #30363d !important; }
.markdown-body img { background: #0d1117; }
.markdown-body blockquote { border-left-color: #8b949e; }
.markdown-body hr { border-color: #30363d; }
';
document.head.appendChild(style);
})();
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
GitHub - datafolklabs/ruby-parseconfig: Ruby Config File Parser for Standard Unix/Linux Type Config Files · GitHub
Skip to content
BranchesTags
Repository files navigation
Ruby ParseConfig Library
ParseConfig provides simple parsing of standard configuration files in the
form of param = value. It also supports nested [group] sections.
Continuous Integration Status
Installation
$ gem install parseconfig

Gemfile
gem 'parseconfig'

Usage
An example configuration file might look like:
# Example Config
param1 = value1
param2 = value2
[group1]
group1_param1 = group1_value1
group1_param2 = group1_value2
[group2]
group2_param1 = group2_value1
group2_param2 = group2_value2

Access it with ParseConfig:
>> require'parseconfig'=>true
>> config=ParseConfig.new('/path/to/config/example.conf')=>#<ParseConfig:0x102410908@config_file="example.conf",@groups=["group1","group2"],@params={"param1"=>"value1""param2"=>"value2",
"group1"=>{"param1"=>"value1""param2"=>"value2",
},"group2"=>{"param1"=>"value1""param2"=>"value2",
},}>
>> config.get_params=>["param1","param2","group1","group2"]
>> config['param1']=>"value1"
>> config.get_groups=>["group1","group2"]
>> config['group1']=>{"group1_param1"=>"group1_value1","group1_param2"=>"group1_value2"}
>> config['group1']['group1_param1']=>"group1_value1"
>> file=File.open('/path/to/config/file','w')=>#<File:file>
>> config.write(file)=>[]
>> file.close=>nil
Development
Docker
This project includes a docker-compose configuration that sets up all required services, and dependencies for development and testing. This is the recommended path for local development, and is the only fully supported option.
The following creates all required docker containers, and launches a BASH shell within the parseconfig dev container for development.
$ make dev
|> parseconfig <| src #

The above is the equivalent of running:
$ docker-compose up -d
$ docker-compose exec parseconfig /bin/bash

Testing Alternative Versions of Ruby
The latest stable version of Ruby is the default, and target version accessible as the parseconfig container within Docker Compose. For testing against alternative versions of Ruby, additional containers are created (ex: parseconfig-rb26, parseconfig-rb27, etc). You can access these containers via:
$ docker-compose ps
Name Command State Ports
---------------------------------------------------------------
ruby-parseconfig_parseconfig-rb26_1 /bin/bash Up
ruby-parseconfig_parseconfig-rb27_1 /bin/bash Up
ruby-parseconfig_parseconfig-rb30_1 /bin/bash Up
ruby-parseconfig_parseconfig_1 /bin/bash Up
$ docker-compose exec parseconfig-rb26 /bin/bash
|> parseconfig-rb26 <| src #

Running Unit Tests
$ make test

License
The ParseConfig library is Open Source and distributed under the MIT license.
Please see the LICENSE file included with this software.
About
Ruby Config File Parser for Standard Unix/Linux Type Config Files
Resources
Readme
MIT license
Activity
Custom properties
Stars
98 stars
Watchers
4 watching
Forks
26 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Highlight search terms from Google/DuckDuckGo/Bing referrer
(function() {
var ref = document.referrer;
var terms = [];
if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {
var url = new URL(ref);
var q = url.searchParams.get('q') || url.searchParams.get('p');
if (q) {
terms = q.split(/\s+/).filter(function(t) { return t.length > 2; });
}
}
if (terms.length === 0) return;
var style = document.createElement('style');
style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';
document.head.appendChild(style);
function highlight(node) {
if (node.nodeType === 3) { // text node
var text = node.textContent;
var found = false;
terms.forEach(function(term) {
var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\]\\]/g, '\\') + ')', 'gi');
if (regex.test(text)) {
found = true;
var frag = document.createDocumentFragment();
var parts = text.split(regex);
parts.forEach(function(part, i) {
if (i % 2 === 0) {
frag.appendChild(document.createTextNode(part));
} else {
var span = document.createElement('span');
span.className = 'userscript-highlight';
span.textContent = part;
frag.appendChild(span);
}
});
node.parentNode.replaceChild(frag, node);
}
});
} else if (node.nodeType === 1 && node.childNodes) { // element
var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];
if (!skipTags.includes(node.tagName)) {
Array.from(node.childNodes).forEach(highlight);
}
}
}
highlight(document.body);
// Re-highlight on dynamic content
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1 || node.nodeType === 3) highlight(node);
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
GitHub - datafolklabs/ruby-parseconfig: Ruby Config File Parser for Standard Unix/Linux Type Config Files · GitHub
Skip to content
BranchesTags
Repository files navigation
Ruby ParseConfig Library
ParseConfig provides simple parsing of standard configuration files in the
form of param = value. It also supports nested [group] sections.
Continuous Integration Status
Installation
$ gem install parseconfig

Gemfile
gem 'parseconfig'

Usage
An example configuration file might look like:
# Example Config
param1 = value1
param2 = value2
[group1]
group1_param1 = group1_value1
group1_param2 = group1_value2
[group2]
group2_param1 = group2_value1
group2_param2 = group2_value2

Access it with ParseConfig:
>> require'parseconfig'=>true
>> config=ParseConfig.new('/path/to/config/example.conf')=>#<ParseConfig:0x102410908@config_file="example.conf",@groups=["group1","group2"],@params={"param1"=>"value1""param2"=>"value2",
"group1"=>{"param1"=>"value1""param2"=>"value2",
},"group2"=>{"param1"=>"value1""param2"=>"value2",
},}>
>> config.get_params=>["param1","param2","group1","group2"]
>> config['param1']=>"value1"
>> config.get_groups=>["group1","group2"]
>> config['group1']=>{"group1_param1"=>"group1_value1","group1_param2"=>"group1_value2"}
>> config['group1']['group1_param1']=>"group1_value1"
>> file=File.open('/path/to/config/file','w')=>#<File:file>
>> config.write(file)=>[]
>> file.close=>nil
Development
Docker
This project includes a docker-compose configuration that sets up all required services, and dependencies for development and testing. This is the recommended path for local development, and is the only fully supported option.
The following creates all required docker containers, and launches a BASH shell within the parseconfig dev container for development.
$ make dev
|> parseconfig <| src #

The above is the equivalent of running:
$ docker-compose up -d
$ docker-compose exec parseconfig /bin/bash

Testing Alternative Versions of Ruby
The latest stable version of Ruby is the default, and target version accessible as the parseconfig container within Docker Compose. For testing against alternative versions of Ruby, additional containers are created (ex: parseconfig-rb26, parseconfig-rb27, etc). You can access these containers via:
$ docker-compose ps
Name Command State Ports
---------------------------------------------------------------
ruby-parseconfig_parseconfig-rb26_1 /bin/bash Up
ruby-parseconfig_parseconfig-rb27_1 /bin/bash Up
ruby-parseconfig_parseconfig-rb30_1 /bin/bash Up
ruby-parseconfig_parseconfig_1 /bin/bash Up
$ docker-compose exec parseconfig-rb26 /bin/bash
|> parseconfig-rb26 <| src #

Running Unit Tests
$ make test

License
The ParseConfig library is Open Source and distributed under the MIT license.
Please see the LICENSE file included with this software.
About
Ruby Config File Parser for Standard Unix/Linux Type Config Files
Resources
Readme
MIT license
Activity
Custom properties
Stars
98 stars
Watchers
4 watching
Forks
26 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Strip utm_, fbclid, gclid, etc. from all links on page
(function() {
var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',
'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',
'ref', 'ref_src', 'source', 'medium', 'campaign'];
function cleanUrl(url) {
try {
var u = new URL(url, window.location.origin);
var changed = false;
trackingParams.forEach(function(p) {
if (u.searchParams.has(p)) {
u.searchParams.delete(p);
changed = true;
}
});
return changed ? u.toString() : url;
} catch (e) {
return url;
}
}
function cleanLinks() {
document.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
cleanLinks();
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1) {
if (node.tagName === 'A') cleanLinks();
node.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '
GitHub - datafolklabs/ruby-parseconfig: Ruby Config File Parser for Standard Unix/Linux Type Config Files · GitHub
Skip to content
BranchesTags
Repository files navigation
Ruby ParseConfig Library
ParseConfig provides simple parsing of standard configuration files in the
form of param = value. It also supports nested [group] sections.
Continuous Integration Status
Installation
$ gem install parseconfig

Gemfile
gem 'parseconfig'

Usage
An example configuration file might look like:
# Example Config
param1 = value1
param2 = value2
[group1]
group1_param1 = group1_value1
group1_param2 = group1_value2
[group2]
group2_param1 = group2_value1
group2_param2 = group2_value2

Access it with ParseConfig:
>> require'parseconfig'=>true
>> config=ParseConfig.new('/path/to/config/example.conf')=>#<ParseConfig:0x102410908@config_file="example.conf",@groups=["group1","group2"],@params={"param1"=>"value1""param2"=>"value2",
"group1"=>{"param1"=>"value1""param2"=>"value2",
},"group2"=>{"param1"=>"value1""param2"=>"value2",
},}>
>> config.get_params=>["param1","param2","group1","group2"]
>> config['param1']=>"value1"
>> config.get_groups=>["group1","group2"]
>> config['group1']=>{"group1_param1"=>"group1_value1","group1_param2"=>"group1_value2"}
>> config['group1']['group1_param1']=>"group1_value1"
>> file=File.open('/path/to/config/file','w')=>#<File:file>
>> config.write(file)=>[]
>> file.close=>nil
Development
Docker
This project includes a docker-compose configuration that sets up all required services, and dependencies for development and testing. This is the recommended path for local development, and is the only fully supported option.
The following creates all required docker containers, and launches a BASH shell within the parseconfig dev container for development.
$ make dev
|> parseconfig <| src #

The above is the equivalent of running:
$ docker-compose up -d
$ docker-compose exec parseconfig /bin/bash

Testing Alternative Versions of Ruby
The latest stable version of Ruby is the default, and target version accessible as the parseconfig container within Docker Compose. For testing against alternative versions of Ruby, additional containers are created (ex: parseconfig-rb26, parseconfig-rb27, etc). You can access these containers via:
$ docker-compose ps
Name Command State Ports
---------------------------------------------------------------
ruby-parseconfig_parseconfig-rb26_1 /bin/bash Up
ruby-parseconfig_parseconfig-rb27_1 /bin/bash Up
ruby-parseconfig_parseconfig-rb30_1 /bin/bash Up
ruby-parseconfig_parseconfig_1 /bin/bash Up
$ docker-compose exec parseconfig-rb26 /bin/bash
|> parseconfig-rb26 <| src #

Running Unit Tests
$ make test

License
The ParseConfig library is Open Source and distributed under the MIT license.
Please see the LICENSE file included with this software.
About
Ruby Config File Parser for Standard Unix/Linux Type Config Files
Resources
Readme
MIT license
Activity
Custom properties
Stars
98 stars
Watchers
4 watching
Forks
26 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Auto-enable theater mode on YouTube
(function() {
function tryTheater() {
var btn = document.querySelector('button[aria-label="Theater mode"], ytd-player #player button[title="Theater mode"]');
if (btn && !btn.classList.contains('activated')) {
btn.click();
}
}
// Try immediately
tryTheater();
// Try after navigation (SPA)
var lastUrl = location.href;
setInterval(function() {
if (location.href !== lastUrl) {
lastUrl = location.href;
setTimeout(tryTheater, 500);
}
}, 1000);
// Also try on player load
var observer = new MutationObserver(tryTheater);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
GitHub - datafolklabs/ruby-parseconfig: Ruby Config File Parser for Standard Unix/Linux Type Config Files · GitHub
Skip to content
BranchesTags
Repository files navigation
Ruby ParseConfig Library
ParseConfig provides simple parsing of standard configuration files in the
form of param = value. It also supports nested [group] sections.
Continuous Integration Status
Installation
$ gem install parseconfig

Gemfile
gem 'parseconfig'

Usage
An example configuration file might look like:
# Example Config
param1 = value1
param2 = value2
[group1]
group1_param1 = group1_value1
group1_param2 = group1_value2
[group2]
group2_param1 = group2_value1
group2_param2 = group2_value2

Access it with ParseConfig:
>> require'parseconfig'=>true
>> config=ParseConfig.new('/path/to/config/example.conf')=>#<ParseConfig:0x102410908@config_file="example.conf",@groups=["group1","group2"],@params={"param1"=>"value1""param2"=>"value2",
"group1"=>{"param1"=>"value1""param2"=>"value2",
},"group2"=>{"param1"=>"value1""param2"=>"value2",
},}>
>> config.get_params=>["param1","param2","group1","group2"]
>> config['param1']=>"value1"
>> config.get_groups=>["group1","group2"]
>> config['group1']=>{"group1_param1"=>"group1_value1","group1_param2"=>"group1_value2"}
>> config['group1']['group1_param1']=>"group1_value1"
>> file=File.open('/path/to/config/file','w')=>#<File:file>
>> config.write(file)=>[]
>> file.close=>nil
Development
Docker
This project includes a docker-compose configuration that sets up all required services, and dependencies for development and testing. This is the recommended path for local development, and is the only fully supported option.
The following creates all required docker containers, and launches a BASH shell within the parseconfig dev container for development.
$ make dev
|> parseconfig <| src #

The above is the equivalent of running:
$ docker-compose up -d
$ docker-compose exec parseconfig /bin/bash

Testing Alternative Versions of Ruby
The latest stable version of Ruby is the default, and target version accessible as the parseconfig container within Docker Compose. For testing against alternative versions of Ruby, additional containers are created (ex: parseconfig-rb26, parseconfig-rb27, etc). You can access these containers via:
$ docker-compose ps
Name Command State Ports
---------------------------------------------------------------
ruby-parseconfig_parseconfig-rb26_1 /bin/bash Up
ruby-parseconfig_parseconfig-rb27_1 /bin/bash Up
ruby-parseconfig_parseconfig-rb30_1 /bin/bash Up
ruby-parseconfig_parseconfig_1 /bin/bash Up
$ docker-compose exec parseconfig-rb26 /bin/bash
|> parseconfig-rb26 <| src #

Running Unit Tests
$ make test

License
The ParseConfig library is Open Source and distributed under the MIT license.
Please see the LICENSE file included with this software.
About
Ruby Config File Parser for Standard Unix/Linux Type Config Files
Resources
Readme
MIT license
Activity
Custom properties
Stars
98 stars
Watchers
4 watching
Forks
26 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Remove or un-stick sticky/fixed headers that block content
(function() {
function unstick() {
document.querySelectorAll('header, nav, [role="banner"], .header, .navbar, .sticky, .fixed-top, [style*="position: fixed"], [style*="position:sticky"]').forEach(function(el) {
if (el.style.position === 'fixed' || el.style.position === 'sticky' || getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {
el.style.position = 'static';
el.style.top = 'auto';
el.style.zIndex = 'auto';
}
});
}
unstick();
var observer = new MutationObserver(unstick);
observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });
})();
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
})();
GitHub - datafolklabs/ruby-parseconfig: Ruby Config File Parser for Standard Unix/Linux Type Config Files · GitHub
Skip to content
BranchesTags
Repository files navigation
Ruby ParseConfig Library
ParseConfig provides simple parsing of standard configuration files in the
form of param = value. It also supports nested [group] sections.
Continuous Integration Status
Installation
$ gem install parseconfig

Gemfile
gem 'parseconfig'

Usage
An example configuration file might look like:
# Example Config
param1 = value1
param2 = value2
[group1]
group1_param1 = group1_value1
group1_param2 = group1_value2
[group2]
group2_param1 = group2_value1
group2_param2 = group2_value2

Access it with ParseConfig:
>> require'parseconfig'=>true
>> config=ParseConfig.new('/path/to/config/example.conf')=>#<ParseConfig:0x102410908@config_file="example.conf",@groups=["group1","group2"],@params={"param1"=>"value1""param2"=>"value2",
"group1"=>{"param1"=>"value1""param2"=>"value2",
},"group2"=>{"param1"=>"value1""param2"=>"value2",
},}>
>> config.get_params=>["param1","param2","group1","group2"]
>> config['param1']=>"value1"
>> config.get_groups=>["group1","group2"]
>> config['group1']=>{"group1_param1"=>"group1_value1","group1_param2"=>"group1_value2"}
>> config['group1']['group1_param1']=>"group1_value1"
>> file=File.open('/path/to/config/file','w')=>#<File:file>
>> config.write(file)=>[]
>> file.close=>nil
Development
Docker
This project includes a docker-compose configuration that sets up all required services, and dependencies for development and testing. This is the recommended path for local development, and is the only fully supported option.
The following creates all required docker containers, and launches a BASH shell within the parseconfig dev container for development.
$ make dev
|> parseconfig <| src #

The above is the equivalent of running:
$ docker-compose up -d
$ docker-compose exec parseconfig /bin/bash

Testing Alternative Versions of Ruby
The latest stable version of Ruby is the default, and target version accessible as the parseconfig container within Docker Compose. For testing against alternative versions of Ruby, additional containers are created (ex: parseconfig-rb26, parseconfig-rb27, etc). You can access these containers via:
$ docker-compose ps
Name Command State Ports
---------------------------------------------------------------
ruby-parseconfig_parseconfig-rb26_1 /bin/bash Up
ruby-parseconfig_parseconfig-rb27_1 /bin/bash Up
ruby-parseconfig_parseconfig-rb30_1 /bin/bash Up
ruby-parseconfig_parseconfig_1 /bin/bash Up
$ docker-compose exec parseconfig-rb26 /bin/bash
|> parseconfig-rb26 <| src #

Running Unit Tests
$ make test

License
The ParseConfig library is Open Source and distributed under the MIT license.
Please see the LICENSE file included with this software.
About
Ruby Config File Parser for Standard Unix/Linux Type Config Files
Resources
Readme
MIT license
Activity
Custom properties
Stars
98 stars
Watchers
4 watching
Forks
26 forks
Report repository
Releases
Packages
Used by
Contributors
Languages