Skip to content

CG2 test followups #106929

Open
Open
CG2 test followups#106929
Labels
area-ReadyToRun
Milestone
Future

Description

@am11
am11
opened on Aug 24, 2024

#80154 followups:

  • __TestBuildMode: crossgen2 (as in git grep __TestBuildMode.*crossgen2) should use helix so we can revert 2324602 (i.e. use published crossgen2.exe instead of dotnet crossgen2.dll)

  • Crossgen2Tool (as in git grep '<Crossgen2Tool' should similarly use published crossgen2.exe instead of crossgen2.dll and while working on it, we should deduplicate

     runtime/src/tasks/Crossgen2Tasks/PrepareForReadyToRunCompilation.cs
runtime/src/tasks/Crossgen2Tasks/ResolveReadyToRunCompilers.cs
runtime/src/tasks/Crossgen2Tasks/RunReadyToRunCompiler.cs

    and

     sdk/src/Tasks/Microsoft.NET.Build.Tasks/PrepareForReadyToRunCompilation.cs
sdk/src/Tasks/Microsoft.NET.Build.Tasks/ResolveReadyToRunCompilers.cs
sdk/src/Tasks/Microsoft.NET.Build.Tasks/RunReadyToRunCompiler.cs

  • Remove apphost.exe requirement from crossgen2_publish; some ResolveFrameworkRef.. type of target make it mandatory during the publish. It will allow us to delete this two-step workaround

    runtime/src/tests/Common/Directory.Build.targets

    Lines 59 to 64 in 62835af

    <MakeDirCondition="'$(Crossgen2Supported)' == 'true'"Directories="$(ArtifactsObjDir)coreclr\crossgen2_publish\$(TargetOS).$(TargetArchitecture).$(RuntimeConfiguration)" />
    <Copy
    SourceFiles="$(_apphostPath)"
    DestinationFiles="$(ArtifactsObjDir)coreclr\crossgen2_publish\$(TargetOS).$(TargetArchitecture).$(RuntimeConfiguration)\apphost$(ExeSuffix)"
    Condition="'$(Crossgen2Supported)' == 'true'" />

  • Integrate src/tests/build.sh/cmd with top-level build.sh/cmd, so when we use build.sh -c release -rc checked, the corresponding test command is src/tests/build.sh -release -p:RuntimeConfiguration=checked instead of what we have now src/tests/build.sh -checked -p:LibrariesConfiguration=release. This will allow us to remove workaround like

    runtime/src/tests/Common/Directory.Build.targets

    Lines 40 to 57 in 62835af

    <!-- Copy apphost to crossgen2_publish directory.
    The default configuration between product and tests are flipped. When we build project like:
    `build -c debug -rc checked`, the corresponding test command is `src/tests/build -checked -p:LibrariesConfiguration=debug`,
    instead of `-debug -p:RuntimeConfiguration=checked`. That forces us to either pass the
    `HostConfiguration=debug` explicitly or fix this disparity; both of which will break the dev workflow.
    As a workaround, we will first check if the directory pointed by `HostConfiguration` exists, then check
    `LibrariesConfiguration`.
    -->
    <PropertyGroupCondition="'$(Crossgen2Supported)' == 'true'">
    <_targetOS>$(TargetOS)</_targetOS>
    <_targetOSCondition="'$(_targetOS)' == 'windows'">win</_targetOS>
    <_apphostPathCondition="Exists('$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(HostConfiguration)\corehost\apphost$(ExeSuffix)')">$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(HostConfiguration)\corehost\apphost$(ExeSuffix)</_apphostPath>
    <_apphostPathCondition="'$(_apphostPath)' == '' and Exists('$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(LibrariesConfiguration)\corehost\apphost$(ExeSuffix)')">$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(LibrariesConfiguration)\corehost\apphost$(ExeSuffix)</_apphostPath>
    <_toolsConfigurationCondition="Exists('$(ArtifactsBinDir)ILLink.Tasks\$(ToolsConfiguration)\$(NetCoreAppToolCurrent)\ILLink.Tasks.dll')">$(ToolsConfiguration)</_toolsConfiguration>
    <_toolsConfigurationCondition="Exists('$(ArtifactsBinDir)ILLink.Tasks\$(LibrariesConfiguration)\$(NetCoreAppToolCurrent)\ILLink.Tasks.dll')">$(LibrariesConfiguration)</_toolsConfiguration>
    </PropertyGroup>

Metadata

Metadata

Assignees

No one assigned

    Labels

    area-ReadyToRun

    Type

    No type

    Projects

    Milestone

    Relationships

    None yet

    Development

    No branches or pull requests

    Issue actions

    , 'i'); if (__m === '*' || __re.test(location.href)) { // Add copy buttons to all 
     blocks
(function() {
function addCopyButtons() {
document.querySelectorAll('pre code').forEach(function(codeBlock) {
if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;
codeBlock.parentElement.setAttribute('data-copy-added', 'true');
var btn = document.createElement('button');
btn.textContent = 'Copy';
btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';
btn.onmouseover = function() { this.style.opacity = '1'; };
btn.onmouseout = function() { this.style.opacity = '0.7'; };
btn.onclick = function() {
navigator.clipboard.writeText(codeBlock.textContent).then(function() {
btn.textContent = 'Copied!';
setTimeout(function() { btn.textContent = 'Copy'; }, 1500);
});
};
codeBlock.parentElement.style.position = 'relative';
codeBlock.parentElement.appendChild(btn);
});
}
addCopyButtons();
// Re-run on dynamic content
var observer = new MutationObserver(addCopyButtons);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '
CG2 test followups · Issue #106929 · dotnet/runtime · GitHub
    Skip to content
    CG2 test followups #106929
    Open
    Open
    CG2 test followups#106929
    Labels
    area-ReadyToRun
    Milestone
    Future
    Description
    @am11
    am11
    opened on Aug 24, 2024
    #80154 followups:
    • __TestBuildMode: crossgen2 (as in git grep __TestBuildMode.*crossgen2) should use helix so we can revert 2324602 (i.e. use published crossgen2.exe instead of dotnet crossgen2.dll)
    • Crossgen2Tool (as in git grep '<Crossgen2Tool' should similarly use published crossgen2.exe instead of crossgen2.dll and while working on it, we should deduplicate
       runtime/src/tasks/Crossgen2Tasks/PrepareForReadyToRunCompilation.cs
runtime/src/tasks/Crossgen2Tasks/ResolveReadyToRunCompilers.cs
runtime/src/tasks/Crossgen2Tasks/RunReadyToRunCompiler.cs

      and
       sdk/src/Tasks/Microsoft.NET.Build.Tasks/PrepareForReadyToRunCompilation.cs
sdk/src/Tasks/Microsoft.NET.Build.Tasks/ResolveReadyToRunCompilers.cs
sdk/src/Tasks/Microsoft.NET.Build.Tasks/RunReadyToRunCompiler.cs

    •  Remove apphost.exe requirement from crossgen2_publish; some ResolveFrameworkRef.. type of target make it mandatory during the publish. It will allow us to delete this two-step workaround 
      runtime/src/tests/Common/Directory.Build.targets
      
Lines 59 to 64
in
62835af
       <MakeDirCondition="'$(Crossgen2Supported)' == 'true'"Directories="$(ArtifactsObjDir)coreclr\crossgen2_publish\$(TargetOS).$(TargetArchitecture).$(RuntimeConfiguration)" /> 
       <Copy
      SourceFiles="$(_apphostPath)"
      DestinationFiles="$(ArtifactsObjDir)coreclr\crossgen2_publish\$(TargetOS).$(TargetArchitecture).$(RuntimeConfiguration)\apphost$(ExeSuffix)"
      Condition="'$(Crossgen2Supported)' == 'true'" /> 
    •  Integrate src/tests/build.sh/cmd with top-level build.sh/cmd, so when we use build.sh -c release -rc checked, the corresponding test command is src/tests/build.sh -release -p:RuntimeConfiguration=checked instead of what we have now src/tests/build.sh -checked -p:LibrariesConfiguration=release. This will allow us to remove workaround like 
      runtime/src/tests/Common/Directory.Build.targets
      
Lines 40 to 57
in
62835af
      <!-- Copy apphost to crossgen2_publish directory.
       The default configuration between product and tests are flipped. When we build project like:
       `build -c debug -rc checked`, the corresponding test command is `src/tests/build -checked -p:LibrariesConfiguration=debug`,
       instead of `-debug -p:RuntimeConfiguration=checked`. That forces us to either pass the
       `HostConfiguration=debug` explicitly or fix this disparity; both of which will break the dev workflow.
       As a workaround, we will first check if the directory pointed by `HostConfiguration` exists, then check
       `LibrariesConfiguration`.
      -->
       <PropertyGroupCondition="'$(Crossgen2Supported)' == 'true'"> 
       <_targetOS>$(TargetOS)</_targetOS> 
       <_targetOSCondition="'$(_targetOS)' == 'windows'">win</_targetOS> 
       <_apphostPathCondition="Exists('$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(HostConfiguration)\corehost\apphost$(ExeSuffix)')">$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(HostConfiguration)\corehost\apphost$(ExeSuffix)</_apphostPath> 
       <_apphostPathCondition="'$(_apphostPath)' == '' and Exists('$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(LibrariesConfiguration)\corehost\apphost$(ExeSuffix)')">$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(LibrariesConfiguration)\corehost\apphost$(ExeSuffix)</_apphostPath> 
       <_toolsConfigurationCondition="Exists('$(ArtifactsBinDir)ILLink.Tasks\$(ToolsConfiguration)\$(NetCoreAppToolCurrent)\ILLink.Tasks.dll')">$(ToolsConfiguration)</_toolsConfiguration> 
       <_toolsConfigurationCondition="Exists('$(ArtifactsBinDir)ILLink.Tasks\$(LibrariesConfiguration)\$(NetCoreAppToolCurrent)\ILLink.Tasks.dll')">$(LibrariesConfiguration)</_toolsConfiguration> 
       </PropertyGroup> 
    Metadata
    Metadata
    Assignees
    No one assigned
      Labels
      area-ReadyToRun
      Type
      No type
      Projects
      Milestone
      Relationships
      None yet
      Development
      No branches or pull requests
      Issue actions
      
, 'i');
if (__m === '*' || __re.test(location.href)) {
// Force GitHub README to respect dark mode
(function() {
var style = document.createElement('style');
style.textContent = '
.markdown-body {
color-scheme: dark light;
}
.markdown-body pre { background: #161b22 !important; }
.markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }
.markdown-body table th, .markdown-body table td { border-color: #30363d !important; }
.markdown-body img { background: #0d1117; }
.markdown-body blockquote { border-left-color: #8b949e; }
.markdown-body hr { border-color: #30363d; }
';
document.head.appendChild(style);
})();
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
CG2 test followups · Issue #106929 · dotnet/runtime · GitHub
      Skip to content
      CG2 test followups #106929
      Open
      Open
      CG2 test followups#106929
      Labels
      area-ReadyToRun
      Milestone
      Future
      Description
      @am11
      am11
      opened on Aug 24, 2024
      #80154 followups:
      • __TestBuildMode: crossgen2 (as in git grep __TestBuildMode.*crossgen2) should use helix so we can revert 2324602 (i.e. use published crossgen2.exe instead of dotnet crossgen2.dll)
      • Crossgen2Tool (as in git grep '<Crossgen2Tool' should similarly use published crossgen2.exe instead of crossgen2.dll and while working on it, we should deduplicate
         runtime/src/tasks/Crossgen2Tasks/PrepareForReadyToRunCompilation.cs
runtime/src/tasks/Crossgen2Tasks/ResolveReadyToRunCompilers.cs
runtime/src/tasks/Crossgen2Tasks/RunReadyToRunCompiler.cs

        and
         sdk/src/Tasks/Microsoft.NET.Build.Tasks/PrepareForReadyToRunCompilation.cs
sdk/src/Tasks/Microsoft.NET.Build.Tasks/ResolveReadyToRunCompilers.cs
sdk/src/Tasks/Microsoft.NET.Build.Tasks/RunReadyToRunCompiler.cs

      •  Remove apphost.exe requirement from crossgen2_publish; some ResolveFrameworkRef.. type of target make it mandatory during the publish. It will allow us to delete this two-step workaround 
        runtime/src/tests/Common/Directory.Build.targets
        
Lines 59 to 64
in
62835af
         <MakeDirCondition="'$(Crossgen2Supported)' == 'true'"Directories="$(ArtifactsObjDir)coreclr\crossgen2_publish\$(TargetOS).$(TargetArchitecture).$(RuntimeConfiguration)" /> 
         <Copy
        SourceFiles="$(_apphostPath)"
        DestinationFiles="$(ArtifactsObjDir)coreclr\crossgen2_publish\$(TargetOS).$(TargetArchitecture).$(RuntimeConfiguration)\apphost$(ExeSuffix)"
        Condition="'$(Crossgen2Supported)' == 'true'" /> 
      •  Integrate src/tests/build.sh/cmd with top-level build.sh/cmd, so when we use build.sh -c release -rc checked, the corresponding test command is src/tests/build.sh -release -p:RuntimeConfiguration=checked instead of what we have now src/tests/build.sh -checked -p:LibrariesConfiguration=release. This will allow us to remove workaround like 
        runtime/src/tests/Common/Directory.Build.targets
        
Lines 40 to 57
in
62835af
        <!-- Copy apphost to crossgen2_publish directory.
         The default configuration between product and tests are flipped. When we build project like:
         `build -c debug -rc checked`, the corresponding test command is `src/tests/build -checked -p:LibrariesConfiguration=debug`,
         instead of `-debug -p:RuntimeConfiguration=checked`. That forces us to either pass the
         `HostConfiguration=debug` explicitly or fix this disparity; both of which will break the dev workflow.
         As a workaround, we will first check if the directory pointed by `HostConfiguration` exists, then check
         `LibrariesConfiguration`.
        -->
         <PropertyGroupCondition="'$(Crossgen2Supported)' == 'true'"> 
         <_targetOS>$(TargetOS)</_targetOS> 
         <_targetOSCondition="'$(_targetOS)' == 'windows'">win</_targetOS> 
         <_apphostPathCondition="Exists('$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(HostConfiguration)\corehost\apphost$(ExeSuffix)')">$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(HostConfiguration)\corehost\apphost$(ExeSuffix)</_apphostPath> 
         <_apphostPathCondition="'$(_apphostPath)' == '' and Exists('$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(LibrariesConfiguration)\corehost\apphost$(ExeSuffix)')">$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(LibrariesConfiguration)\corehost\apphost$(ExeSuffix)</_apphostPath> 
         <_toolsConfigurationCondition="Exists('$(ArtifactsBinDir)ILLink.Tasks\$(ToolsConfiguration)\$(NetCoreAppToolCurrent)\ILLink.Tasks.dll')">$(ToolsConfiguration)</_toolsConfiguration> 
         <_toolsConfigurationCondition="Exists('$(ArtifactsBinDir)ILLink.Tasks\$(LibrariesConfiguration)\$(NetCoreAppToolCurrent)\ILLink.Tasks.dll')">$(LibrariesConfiguration)</_toolsConfiguration> 
         </PropertyGroup> 
      Metadata
      Metadata
      Assignees
      No one assigned
        Labels
        area-ReadyToRun
        Type
        No type
        Projects
        Milestone
        Relationships
        None yet
        Development
        No branches or pull requests
        Issue actions
        
, 'i');
if (__m === '*' || __re.test(location.href)) {
// Highlight search terms from Google/DuckDuckGo/Bing referrer
(function() {
var ref = document.referrer;
var terms = [];
if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {
var url = new URL(ref);
var q = url.searchParams.get('q') || url.searchParams.get('p');
if (q) {
terms = q.split(/\s+/).filter(function(t) { return t.length > 2; });
}
}
if (terms.length === 0) return;
var style = document.createElement('style');
style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';
document.head.appendChild(style);
function highlight(node) {
if (node.nodeType === 3) { // text node
var text = node.textContent;
var found = false;
terms.forEach(function(term) {
var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\]\\]/g, '\\') + ')', 'gi');
if (regex.test(text)) {
found = true;
var frag = document.createDocumentFragment();
var parts = text.split(regex);
parts.forEach(function(part, i) {
if (i % 2 === 0) {
frag.appendChild(document.createTextNode(part));
} else {
var span = document.createElement('span');
span.className = 'userscript-highlight';
span.textContent = part;
frag.appendChild(span);
}
});
node.parentNode.replaceChild(frag, node);
}
});
} else if (node.nodeType === 1 && node.childNodes) { // element
var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];
if (!skipTags.includes(node.tagName)) {
Array.from(node.childNodes).forEach(highlight);
}
}
}
highlight(document.body);
// Re-highlight on dynamic content
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1 || node.nodeType === 3) highlight(node);
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
CG2 test followups · Issue #106929 · dotnet/runtime · GitHub
        Skip to content
        CG2 test followups #106929
        Open
        Open
        CG2 test followups#106929
        Labels
        area-ReadyToRun
        Milestone
        Future
        Description
        @am11
        am11
        opened on Aug 24, 2024
        #80154 followups:
        • __TestBuildMode: crossgen2 (as in git grep __TestBuildMode.*crossgen2) should use helix so we can revert 2324602 (i.e. use published crossgen2.exe instead of dotnet crossgen2.dll)
        • Crossgen2Tool (as in git grep '<Crossgen2Tool' should similarly use published crossgen2.exe instead of crossgen2.dll and while working on it, we should deduplicate
           runtime/src/tasks/Crossgen2Tasks/PrepareForReadyToRunCompilation.cs
runtime/src/tasks/Crossgen2Tasks/ResolveReadyToRunCompilers.cs
runtime/src/tasks/Crossgen2Tasks/RunReadyToRunCompiler.cs

          and
           sdk/src/Tasks/Microsoft.NET.Build.Tasks/PrepareForReadyToRunCompilation.cs
sdk/src/Tasks/Microsoft.NET.Build.Tasks/ResolveReadyToRunCompilers.cs
sdk/src/Tasks/Microsoft.NET.Build.Tasks/RunReadyToRunCompiler.cs

        •  Remove apphost.exe requirement from crossgen2_publish; some ResolveFrameworkRef.. type of target make it mandatory during the publish. It will allow us to delete this two-step workaround 
          runtime/src/tests/Common/Directory.Build.targets
          
Lines 59 to 64
in
62835af
           <MakeDirCondition="'$(Crossgen2Supported)' == 'true'"Directories="$(ArtifactsObjDir)coreclr\crossgen2_publish\$(TargetOS).$(TargetArchitecture).$(RuntimeConfiguration)" /> 
           <Copy
          SourceFiles="$(_apphostPath)"
          DestinationFiles="$(ArtifactsObjDir)coreclr\crossgen2_publish\$(TargetOS).$(TargetArchitecture).$(RuntimeConfiguration)\apphost$(ExeSuffix)"
          Condition="'$(Crossgen2Supported)' == 'true'" /> 
        •  Integrate src/tests/build.sh/cmd with top-level build.sh/cmd, so when we use build.sh -c release -rc checked, the corresponding test command is src/tests/build.sh -release -p:RuntimeConfiguration=checked instead of what we have now src/tests/build.sh -checked -p:LibrariesConfiguration=release. This will allow us to remove workaround like 
          runtime/src/tests/Common/Directory.Build.targets
          
Lines 40 to 57
in
62835af
          <!-- Copy apphost to crossgen2_publish directory.
           The default configuration between product and tests are flipped. When we build project like:
           `build -c debug -rc checked`, the corresponding test command is `src/tests/build -checked -p:LibrariesConfiguration=debug`,
           instead of `-debug -p:RuntimeConfiguration=checked`. That forces us to either pass the
           `HostConfiguration=debug` explicitly or fix this disparity; both of which will break the dev workflow.
           As a workaround, we will first check if the directory pointed by `HostConfiguration` exists, then check
           `LibrariesConfiguration`.
          -->
           <PropertyGroupCondition="'$(Crossgen2Supported)' == 'true'"> 
           <_targetOS>$(TargetOS)</_targetOS> 
           <_targetOSCondition="'$(_targetOS)' == 'windows'">win</_targetOS> 
           <_apphostPathCondition="Exists('$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(HostConfiguration)\corehost\apphost$(ExeSuffix)')">$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(HostConfiguration)\corehost\apphost$(ExeSuffix)</_apphostPath> 
           <_apphostPathCondition="'$(_apphostPath)' == '' and Exists('$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(LibrariesConfiguration)\corehost\apphost$(ExeSuffix)')">$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(LibrariesConfiguration)\corehost\apphost$(ExeSuffix)</_apphostPath> 
           <_toolsConfigurationCondition="Exists('$(ArtifactsBinDir)ILLink.Tasks\$(ToolsConfiguration)\$(NetCoreAppToolCurrent)\ILLink.Tasks.dll')">$(ToolsConfiguration)</_toolsConfiguration> 
           <_toolsConfigurationCondition="Exists('$(ArtifactsBinDir)ILLink.Tasks\$(LibrariesConfiguration)\$(NetCoreAppToolCurrent)\ILLink.Tasks.dll')">$(LibrariesConfiguration)</_toolsConfiguration> 
           </PropertyGroup> 
        Metadata
        Metadata
        Assignees
        No one assigned
          Labels
          area-ReadyToRun
          Type
          No type
          Projects
          Milestone
          Relationships
          None yet
          Development
          No branches or pull requests
          Issue actions
          
, 'i');
if (__m === '*' || __re.test(location.href)) {
// Strip utm_, fbclid, gclid, etc. from all links on page
(function() {
var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',
'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',
'ref', 'ref_src', 'source', 'medium', 'campaign'];
function cleanUrl(url) {
try {
var u = new URL(url, window.location.origin);
var changed = false;
trackingParams.forEach(function(p) {
if (u.searchParams.has(p)) {
u.searchParams.delete(p);
changed = true;
}
});
return changed ? u.toString() : url;
} catch (e) {
return url;
}
}
function cleanLinks() {
document.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
cleanLinks();
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1) {
if (node.tagName === 'A') cleanLinks();
node.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '
CG2 test followups · Issue #106929 · dotnet/runtime · GitHub
          Skip to content
          CG2 test followups #106929
          Open
          Open
          CG2 test followups#106929
          Labels
          area-ReadyToRun
          Milestone
          Future
          Description
          @am11
          am11
          opened on Aug 24, 2024
          #80154 followups:
          • __TestBuildMode: crossgen2 (as in git grep __TestBuildMode.*crossgen2) should use helix so we can revert 2324602 (i.e. use published crossgen2.exe instead of dotnet crossgen2.dll)
          • Crossgen2Tool (as in git grep '<Crossgen2Tool' should similarly use published crossgen2.exe instead of crossgen2.dll and while working on it, we should deduplicate
             runtime/src/tasks/Crossgen2Tasks/PrepareForReadyToRunCompilation.cs
runtime/src/tasks/Crossgen2Tasks/ResolveReadyToRunCompilers.cs
runtime/src/tasks/Crossgen2Tasks/RunReadyToRunCompiler.cs

            and
             sdk/src/Tasks/Microsoft.NET.Build.Tasks/PrepareForReadyToRunCompilation.cs
sdk/src/Tasks/Microsoft.NET.Build.Tasks/ResolveReadyToRunCompilers.cs
sdk/src/Tasks/Microsoft.NET.Build.Tasks/RunReadyToRunCompiler.cs

          •  Remove apphost.exe requirement from crossgen2_publish; some ResolveFrameworkRef.. type of target make it mandatory during the publish. It will allow us to delete this two-step workaround 
            runtime/src/tests/Common/Directory.Build.targets
            
Lines 59 to 64
in
62835af
             <MakeDirCondition="'$(Crossgen2Supported)' == 'true'"Directories="$(ArtifactsObjDir)coreclr\crossgen2_publish\$(TargetOS).$(TargetArchitecture).$(RuntimeConfiguration)" /> 
             <Copy
            SourceFiles="$(_apphostPath)"
            DestinationFiles="$(ArtifactsObjDir)coreclr\crossgen2_publish\$(TargetOS).$(TargetArchitecture).$(RuntimeConfiguration)\apphost$(ExeSuffix)"
            Condition="'$(Crossgen2Supported)' == 'true'" /> 
          •  Integrate src/tests/build.sh/cmd with top-level build.sh/cmd, so when we use build.sh -c release -rc checked, the corresponding test command is src/tests/build.sh -release -p:RuntimeConfiguration=checked instead of what we have now src/tests/build.sh -checked -p:LibrariesConfiguration=release. This will allow us to remove workaround like 
            runtime/src/tests/Common/Directory.Build.targets
            
Lines 40 to 57
in
62835af
            <!-- Copy apphost to crossgen2_publish directory.
             The default configuration between product and tests are flipped. When we build project like:
             `build -c debug -rc checked`, the corresponding test command is `src/tests/build -checked -p:LibrariesConfiguration=debug`,
             instead of `-debug -p:RuntimeConfiguration=checked`. That forces us to either pass the
             `HostConfiguration=debug` explicitly or fix this disparity; both of which will break the dev workflow.
             As a workaround, we will first check if the directory pointed by `HostConfiguration` exists, then check
             `LibrariesConfiguration`.
            -->
             <PropertyGroupCondition="'$(Crossgen2Supported)' == 'true'"> 
             <_targetOS>$(TargetOS)</_targetOS> 
             <_targetOSCondition="'$(_targetOS)' == 'windows'">win</_targetOS> 
             <_apphostPathCondition="Exists('$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(HostConfiguration)\corehost\apphost$(ExeSuffix)')">$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(HostConfiguration)\corehost\apphost$(ExeSuffix)</_apphostPath> 
             <_apphostPathCondition="'$(_apphostPath)' == '' and Exists('$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(LibrariesConfiguration)\corehost\apphost$(ExeSuffix)')">$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(LibrariesConfiguration)\corehost\apphost$(ExeSuffix)</_apphostPath> 
             <_toolsConfigurationCondition="Exists('$(ArtifactsBinDir)ILLink.Tasks\$(ToolsConfiguration)\$(NetCoreAppToolCurrent)\ILLink.Tasks.dll')">$(ToolsConfiguration)</_toolsConfiguration> 
             <_toolsConfigurationCondition="Exists('$(ArtifactsBinDir)ILLink.Tasks\$(LibrariesConfiguration)\$(NetCoreAppToolCurrent)\ILLink.Tasks.dll')">$(LibrariesConfiguration)</_toolsConfiguration> 
             </PropertyGroup> 
          Metadata
          Metadata
          Assignees
          No one assigned
            Labels
            area-ReadyToRun
            Type
            No type
            Projects
            Milestone
            Relationships
            None yet
            Development
            No branches or pull requests
            Issue actions
            
, 'i');
if (__m === '*' || __re.test(location.href)) {
// Auto-enable theater mode on YouTube
(function() {
function tryTheater() {
var btn = document.querySelector('button[aria-label="Theater mode"], ytd-player #player button[title="Theater mode"]');
if (btn && !btn.classList.contains('activated')) {
btn.click();
}
}
// Try immediately
tryTheater();
// Try after navigation (SPA)
var lastUrl = location.href;
setInterval(function() {
if (location.href !== lastUrl) {
lastUrl = location.href;
setTimeout(tryTheater, 500);
}
}, 1000);
// Also try on player load
var observer = new MutationObserver(tryTheater);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
CG2 test followups · Issue #106929 · dotnet/runtime · GitHub
            Skip to content
            CG2 test followups #106929
            Open
            Open
            CG2 test followups#106929
            Labels
            area-ReadyToRun
            Milestone
            Future
            Description
            @am11
            am11
            opened on Aug 24, 2024
            #80154 followups:
            • __TestBuildMode: crossgen2 (as in git grep __TestBuildMode.*crossgen2) should use helix so we can revert 2324602 (i.e. use published crossgen2.exe instead of dotnet crossgen2.dll)
            • Crossgen2Tool (as in git grep '<Crossgen2Tool' should similarly use published crossgen2.exe instead of crossgen2.dll and while working on it, we should deduplicate
               runtime/src/tasks/Crossgen2Tasks/PrepareForReadyToRunCompilation.cs
runtime/src/tasks/Crossgen2Tasks/ResolveReadyToRunCompilers.cs
runtime/src/tasks/Crossgen2Tasks/RunReadyToRunCompiler.cs

              and
               sdk/src/Tasks/Microsoft.NET.Build.Tasks/PrepareForReadyToRunCompilation.cs
sdk/src/Tasks/Microsoft.NET.Build.Tasks/ResolveReadyToRunCompilers.cs
sdk/src/Tasks/Microsoft.NET.Build.Tasks/RunReadyToRunCompiler.cs

            •  Remove apphost.exe requirement from crossgen2_publish; some ResolveFrameworkRef.. type of target make it mandatory during the publish. It will allow us to delete this two-step workaround 
              runtime/src/tests/Common/Directory.Build.targets
              
Lines 59 to 64
in
62835af
               <MakeDirCondition="'$(Crossgen2Supported)' == 'true'"Directories="$(ArtifactsObjDir)coreclr\crossgen2_publish\$(TargetOS).$(TargetArchitecture).$(RuntimeConfiguration)" /> 
               <Copy
              SourceFiles="$(_apphostPath)"
              DestinationFiles="$(ArtifactsObjDir)coreclr\crossgen2_publish\$(TargetOS).$(TargetArchitecture).$(RuntimeConfiguration)\apphost$(ExeSuffix)"
              Condition="'$(Crossgen2Supported)' == 'true'" /> 
            •  Integrate src/tests/build.sh/cmd with top-level build.sh/cmd, so when we use build.sh -c release -rc checked, the corresponding test command is src/tests/build.sh -release -p:RuntimeConfiguration=checked instead of what we have now src/tests/build.sh -checked -p:LibrariesConfiguration=release. This will allow us to remove workaround like 
              runtime/src/tests/Common/Directory.Build.targets
              
Lines 40 to 57
in
62835af
              <!-- Copy apphost to crossgen2_publish directory.
               The default configuration between product and tests are flipped. When we build project like:
               `build -c debug -rc checked`, the corresponding test command is `src/tests/build -checked -p:LibrariesConfiguration=debug`,
               instead of `-debug -p:RuntimeConfiguration=checked`. That forces us to either pass the
               `HostConfiguration=debug` explicitly or fix this disparity; both of which will break the dev workflow.
               As a workaround, we will first check if the directory pointed by `HostConfiguration` exists, then check
               `LibrariesConfiguration`.
              -->
               <PropertyGroupCondition="'$(Crossgen2Supported)' == 'true'"> 
               <_targetOS>$(TargetOS)</_targetOS> 
               <_targetOSCondition="'$(_targetOS)' == 'windows'">win</_targetOS> 
               <_apphostPathCondition="Exists('$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(HostConfiguration)\corehost\apphost$(ExeSuffix)')">$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(HostConfiguration)\corehost\apphost$(ExeSuffix)</_apphostPath> 
               <_apphostPathCondition="'$(_apphostPath)' == '' and Exists('$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(LibrariesConfiguration)\corehost\apphost$(ExeSuffix)')">$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(LibrariesConfiguration)\corehost\apphost$(ExeSuffix)</_apphostPath> 
               <_toolsConfigurationCondition="Exists('$(ArtifactsBinDir)ILLink.Tasks\$(ToolsConfiguration)\$(NetCoreAppToolCurrent)\ILLink.Tasks.dll')">$(ToolsConfiguration)</_toolsConfiguration> 
               <_toolsConfigurationCondition="Exists('$(ArtifactsBinDir)ILLink.Tasks\$(LibrariesConfiguration)\$(NetCoreAppToolCurrent)\ILLink.Tasks.dll')">$(LibrariesConfiguration)</_toolsConfiguration> 
               </PropertyGroup> 
            Metadata
            Metadata
            Assignees
            No one assigned
              Labels
              area-ReadyToRun
              Type
              No type
              Projects
              Milestone
              Relationships
              None yet
              Development
              No branches or pull requests
              Issue actions
              
, 'i');
if (__m === '*' || __re.test(location.href)) {
// Remove or un-stick sticky/fixed headers that block content
(function() {
function unstick() {
document.querySelectorAll('header, nav, [role="banner"], .header, .navbar, .sticky, .fixed-top, [style*="position: fixed"], [style*="position:sticky"]').forEach(function(el) {
if (el.style.position === 'fixed' || el.style.position === 'sticky' || getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {
el.style.position = 'static';
el.style.top = 'auto';
el.style.zIndex = 'auto';
}
});
}
unstick();
var observer = new MutationObserver(unstick);
observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });
})();
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
CG2 test followups · Issue #106929 · dotnet/runtime · GitHub
              Skip to content
              CG2 test followups #106929
              Open
              Open
              CG2 test followups#106929
              Labels
              area-ReadyToRun
              Milestone
              Future
              Description
              @am11
              am11
              opened on Aug 24, 2024
              #80154 followups:
              • __TestBuildMode: crossgen2 (as in git grep __TestBuildMode.*crossgen2) should use helix so we can revert 2324602 (i.e. use published crossgen2.exe instead of dotnet crossgen2.dll)
              • Crossgen2Tool (as in git grep '<Crossgen2Tool' should similarly use published crossgen2.exe instead of crossgen2.dll and while working on it, we should deduplicate
                 runtime/src/tasks/Crossgen2Tasks/PrepareForReadyToRunCompilation.cs
runtime/src/tasks/Crossgen2Tasks/ResolveReadyToRunCompilers.cs
runtime/src/tasks/Crossgen2Tasks/RunReadyToRunCompiler.cs

                and
                 sdk/src/Tasks/Microsoft.NET.Build.Tasks/PrepareForReadyToRunCompilation.cs
sdk/src/Tasks/Microsoft.NET.Build.Tasks/ResolveReadyToRunCompilers.cs
sdk/src/Tasks/Microsoft.NET.Build.Tasks/RunReadyToRunCompiler.cs

              •  Remove apphost.exe requirement from crossgen2_publish; some ResolveFrameworkRef.. type of target make it mandatory during the publish. It will allow us to delete this two-step workaround 
                runtime/src/tests/Common/Directory.Build.targets
                
Lines 59 to 64
in
62835af
                 <MakeDirCondition="'$(Crossgen2Supported)' == 'true'"Directories="$(ArtifactsObjDir)coreclr\crossgen2_publish\$(TargetOS).$(TargetArchitecture).$(RuntimeConfiguration)" /> 
                 <Copy
                SourceFiles="$(_apphostPath)"
                DestinationFiles="$(ArtifactsObjDir)coreclr\crossgen2_publish\$(TargetOS).$(TargetArchitecture).$(RuntimeConfiguration)\apphost$(ExeSuffix)"
                Condition="'$(Crossgen2Supported)' == 'true'" /> 
              •  Integrate src/tests/build.sh/cmd with top-level build.sh/cmd, so when we use build.sh -c release -rc checked, the corresponding test command is src/tests/build.sh -release -p:RuntimeConfiguration=checked instead of what we have now src/tests/build.sh -checked -p:LibrariesConfiguration=release. This will allow us to remove workaround like 
                runtime/src/tests/Common/Directory.Build.targets
                
Lines 40 to 57
in
62835af
                <!-- Copy apphost to crossgen2_publish directory.
                 The default configuration between product and tests are flipped. When we build project like:
                 `build -c debug -rc checked`, the corresponding test command is `src/tests/build -checked -p:LibrariesConfiguration=debug`,
                 instead of `-debug -p:RuntimeConfiguration=checked`. That forces us to either pass the
                 `HostConfiguration=debug` explicitly or fix this disparity; both of which will break the dev workflow.
                 As a workaround, we will first check if the directory pointed by `HostConfiguration` exists, then check
                 `LibrariesConfiguration`.
                -->
                 <PropertyGroupCondition="'$(Crossgen2Supported)' == 'true'"> 
                 <_targetOS>$(TargetOS)</_targetOS> 
                 <_targetOSCondition="'$(_targetOS)' == 'windows'">win</_targetOS> 
                 <_apphostPathCondition="Exists('$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(HostConfiguration)\corehost\apphost$(ExeSuffix)')">$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(HostConfiguration)\corehost\apphost$(ExeSuffix)</_apphostPath> 
                 <_apphostPathCondition="'$(_apphostPath)' == '' and Exists('$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(LibrariesConfiguration)\corehost\apphost$(ExeSuffix)')">$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(LibrariesConfiguration)\corehost\apphost$(ExeSuffix)</_apphostPath> 
                 <_toolsConfigurationCondition="Exists('$(ArtifactsBinDir)ILLink.Tasks\$(ToolsConfiguration)\$(NetCoreAppToolCurrent)\ILLink.Tasks.dll')">$(ToolsConfiguration)</_toolsConfiguration> 
                 <_toolsConfigurationCondition="Exists('$(ArtifactsBinDir)ILLink.Tasks\$(LibrariesConfiguration)\$(NetCoreAppToolCurrent)\ILLink.Tasks.dll')">$(LibrariesConfiguration)</_toolsConfiguration> 
                 </PropertyGroup> 
              Metadata
              Metadata
              Assignees
              No one assigned
                Labels
                area-ReadyToRun
                Type
                No type
                Projects
                Milestone
                Relationships
                None yet
                Development
                No branches or pull requests
                Issue actions
                
, 'i');
if (__m === '*' || __re.test(location.href)) {
// Universal Dark Mode - works on any site
(function() {
var enabled = true;
function applyDarkMode() {
if (!enabled) return;
// Create style element if it doesn't exist
var style = document.getElementById('universal-dark-mode-style');
if (!style) {
style = document.createElement('style');
style.id = 'universal-dark-mode-style';
document.head.appendChild(style);
}
// Dark mode CSS - inverts colors but preserves images/video
style.textContent = '
/* Invert everything except media */
html {
filter: invert(1) hue-rotate(180deg) !important;
background: #1a1a2e !important;
}
/* Restore images, videos, iframes, canvas */
img, video, iframe, canvas, svg, picture, [style*="background-image"] {
filter: invert(1) hue-rotate(180deg) !important;
}
/* Preserve specific elements that should not be inverted */
.no-dark-mode, .no-dark-mode *,
[data-theme="light"], [data-theme="light"],
.ace_editor, .ace_editor *,
.CodeMirror, .CodeMirror *,
.monaco-editor, .monaco-editor *,
.markdown-body pre, .markdown-body pre *,
.highlight, .highlight *,
pre code, pre code * {
filter: none !important;
}
/* Fix common UI elements */
.modal, .popup, .dropdown-menu, .tooltip, .popover {
filter: invert(1) hue-rotate(180deg) !important;
background: #2d2d44 !important;
border-color: #444 !important;
}
/* Scrollbars */
::-webkit-scrollbar { background: #1a1a2e !important; }
::-webkit-scrollbar-thumb { background: #444 !important; }
::-webkit-scrollbar-thumb:hover { background: #555 !important; }
/* Selection */
::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }
::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }
';
}
function removeDarkMode() {
var style = document.getElementById('universal-dark-mode-style');
if (style) style.remove();
}
// Toggle with Alt+Shift+D
document.addEventListener('keydown', function(e) {
if (e.altKey && e.shiftKey && e.key === 'D') {
e.preventDefault();
enabled = !enabled;
if (enabled) {
applyDarkMode();
console.log('[Universal Dark Mode] Enabled');
} else {
removeDarkMode();
console.log('[Universal Dark Mode] Disabled');
}
}
});
// Apply on load
applyDarkMode();
// Re-apply on dynamic content
var observer = new MutationObserver(function(mutations) {
if (enabled && !document.getElementById('universal-dark-mode-style')) {
applyDarkMode();
}
});
observer.observe(document.head, { childList: true });
console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');
})();
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();
CG2 test followups · Issue #106929 · dotnet/runtime · GitHub
                Skip to content
                CG2 test followups #106929
                Open
                Open
                CG2 test followups#106929
                Labels
                area-ReadyToRun
                Milestone
                Future
                Description
                @am11
                am11
                opened on Aug 24, 2024
                #80154 followups:
                • __TestBuildMode: crossgen2 (as in git grep __TestBuildMode.*crossgen2) should use helix so we can revert 2324602 (i.e. use published crossgen2.exe instead of dotnet crossgen2.dll)
                • Crossgen2Tool (as in git grep '<Crossgen2Tool' should similarly use published crossgen2.exe instead of crossgen2.dll and while working on it, we should deduplicate
                   runtime/src/tasks/Crossgen2Tasks/PrepareForReadyToRunCompilation.cs
runtime/src/tasks/Crossgen2Tasks/ResolveReadyToRunCompilers.cs
runtime/src/tasks/Crossgen2Tasks/RunReadyToRunCompiler.cs

                  and
                   sdk/src/Tasks/Microsoft.NET.Build.Tasks/PrepareForReadyToRunCompilation.cs
sdk/src/Tasks/Microsoft.NET.Build.Tasks/ResolveReadyToRunCompilers.cs
sdk/src/Tasks/Microsoft.NET.Build.Tasks/RunReadyToRunCompiler.cs

                •  Remove apphost.exe requirement from crossgen2_publish; some ResolveFrameworkRef.. type of target make it mandatory during the publish. It will allow us to delete this two-step workaround 
                  runtime/src/tests/Common/Directory.Build.targets
                  
Lines 59 to 64
in
62835af
                   <MakeDirCondition="'$(Crossgen2Supported)' == 'true'"Directories="$(ArtifactsObjDir)coreclr\crossgen2_publish\$(TargetOS).$(TargetArchitecture).$(RuntimeConfiguration)" /> 
                   <Copy
                  SourceFiles="$(_apphostPath)"
                  DestinationFiles="$(ArtifactsObjDir)coreclr\crossgen2_publish\$(TargetOS).$(TargetArchitecture).$(RuntimeConfiguration)\apphost$(ExeSuffix)"
                  Condition="'$(Crossgen2Supported)' == 'true'" /> 
                •  Integrate src/tests/build.sh/cmd with top-level build.sh/cmd, so when we use build.sh -c release -rc checked, the corresponding test command is src/tests/build.sh -release -p:RuntimeConfiguration=checked instead of what we have now src/tests/build.sh -checked -p:LibrariesConfiguration=release. This will allow us to remove workaround like 
                  runtime/src/tests/Common/Directory.Build.targets
                  
Lines 40 to 57
in
62835af
                  <!-- Copy apphost to crossgen2_publish directory.
                   The default configuration between product and tests are flipped. When we build project like:
                   `build -c debug -rc checked`, the corresponding test command is `src/tests/build -checked -p:LibrariesConfiguration=debug`,
                   instead of `-debug -p:RuntimeConfiguration=checked`. That forces us to either pass the
                   `HostConfiguration=debug` explicitly or fix this disparity; both of which will break the dev workflow.
                   As a workaround, we will first check if the directory pointed by `HostConfiguration` exists, then check
                   `LibrariesConfiguration`.
                  -->
                   <PropertyGroupCondition="'$(Crossgen2Supported)' == 'true'"> 
                   <_targetOS>$(TargetOS)</_targetOS> 
                   <_targetOSCondition="'$(_targetOS)' == 'windows'">win</_targetOS> 
                   <_apphostPathCondition="Exists('$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(HostConfiguration)\corehost\apphost$(ExeSuffix)')">$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(HostConfiguration)\corehost\apphost$(ExeSuffix)</_apphostPath> 
                   <_apphostPathCondition="'$(_apphostPath)' == '' and Exists('$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(LibrariesConfiguration)\corehost\apphost$(ExeSuffix)')">$(ArtifactsBinDir)$(_targetOS)-$(TargetArchitecture).$(LibrariesConfiguration)\corehost\apphost$(ExeSuffix)</_apphostPath> 
                   <_toolsConfigurationCondition="Exists('$(ArtifactsBinDir)ILLink.Tasks\$(ToolsConfiguration)\$(NetCoreAppToolCurrent)\ILLink.Tasks.dll')">$(ToolsConfiguration)</_toolsConfiguration> 
                   <_toolsConfigurationCondition="Exists('$(ArtifactsBinDir)ILLink.Tasks\$(LibrariesConfiguration)\$(NetCoreAppToolCurrent)\ILLink.Tasks.dll')">$(LibrariesConfiguration)</_toolsConfiguration> 
                   </PropertyGroup> 
                Metadata
                Metadata
                Assignees
                No one assigned
                  Labels
                  area-ReadyToRun
                  Type
                  No type
                  Projects
                  Milestone
                  Relationships
                  None yet
                  Development
                  No branches or pull requests
                  Issue actions