tmon-cli

A Command Line Utility for Temperature measurement using LM35 and Arduino

Pin Connections to Arduino

• A1 <- sensor 1
• A2 <- sensor 2
• A3 <- sensor 3

Installation

# clone the repository
$ git clone git@github.com:filsgrp/tmon-cli.git
# move into tmon-cli folder
$ cd tmon-cli
# install requirements
$ pip install -r requirments.txt
# intall tmon
$ pip install .# check installation
$ tmon
Usage: tmon [OPTIONS] COMMAND [ARGS]...
tmon - Temperature Mointor Utitlity for capturing data from 3 LM35
Temperature sensors through Arduino.
Options:
--help Show this message and exit.
Commands:
run collect the serial data from Arduino
view view previously collected data FILE - specify the .csv file
location...
# change the required number of trials in the timon.ino and dump the file into the development board 
$ head tmon-cli/arduino/tmon/tmon.ino int i = 0;
int trials = 100;
// connect sensor 1 to Analog pin A1
int sensor1= A1;
// connect sensor 2 to Analog pin A2
int sensor2= A2;
// connect sensor 3 to Analog pin A3
int sensor3= A3;

Usage

• tmon commands

  $ tmon Usage: tmon [OPTIONS] COMMAND [ARGS]...
  tmon - Temperature Mointor Utitlity for capturing data from 3 LM35
  Temperature sensors through Arduino.
  Options:
  --help Show this message and exit.
  Commands:
  run collect the serial data from Arduino
  view view previously collected data FILE - specify the .csv file
  location...

• run sub command

  $ tmon run --help
  Usage: tmon run [OPTIONS]
  collect the serial data from Arduino
  Options:
  -p, --path TEXT path for output csv file to be created
  -o, --output TEXT name of the output csv file to be created
  -s, --show show captured data as a plot at the end
  --help Show this message and exit.

• view subcommand

  $ tmon view --help
  Usage: tmon view [OPTIONS] FILE
  view previously collected data
  FILE - specify the .csv file location that you want to view
  Options:
  --help Show this message and exit.

Examples

• Run Command

  # when arudino connetion is not available, tmon exists with the following message 
  $ tmon run
  Arduino Connection Not Found, Check the USB Connection..!!# when arduino is connected, tmon starts collecting serial data
  $ tmon run
  listening for serial data....
  26.37 26.37 26.37
  26.37 26.37 26.86
  26.86 26.37 26.86
  26.37 26.37 26.86
  .................
  .................
  26.37 26.86 26.86
  26.37 26.37 26.86
  finished
  Connection Closed
  saving data into csv file
  data saved to : ./temperature-20201203-160507.csv

• View Command

  $ tmon view data/temperature-20201202-155207.csv

Credits

• create.arduino.cc