Hamlib OpenAction Plugin

An OpenAction (OpenDeck) plugin to control ham radio transceivers through a hamlib rigctld daemon.

Configuration

The plugin currently supports only one rigctld connection to localhost:4532.

Actions

The following actions are currently available:

Action	rigctld Command	Description
Frequency Dial	\set_freq, \get_freq	Encoder to tune the VFO frequency in configurable steps
Level Encoder	\set_level, \get_level	Encoder to adjust a level value in configurable steps
On/Off	\get_powerstat, \set_powerstat	Toggle the rig power between on and off
Power State	\set_powerstat	Set the rig to a specific power state (off, on, standby, operate)
RIT	\set_rit, \get_rit, \set_func	Encoder to adjust the RIT offset, press/keypad to toggle RIT on/off
Select Mode	\set_mode	Set the operating mode for a VFO
Select VFO	\set_vfo	Select the active VFO
Send Morse	\send_morse	Send a preconfigured text as Morse code
Set Antenna	\set_ant	Select an antenna for a VFO
Set Frequency	\set_freq	Set the frequency of a VFO to a fixed value
Set Frequency (rel)	\set_freq, \get_freq	Set a VFO frequency relative to another VFO's frequency
Set Function	\set_func	Enable or disable a rig function
Set Level	\set_level	Set a level to a fixed value
Set Parameter	\set_parm	Set a rig-wide parameter value
Set Split VFO	\set_split_vfo	Enable or disable split operation and set the TX VFO
Stop Morse	\stop_morse	Stop the current Morse code transmission
Toggle Function	\get_func, \set_func	Toggle a rig function on/off
VFO Operation	\vfo_op	Perform a VFO operation (e.g. copy, exchange, band up/down)
VFO Operation Encoder	\vfo_op	Encoder with configurable VFO operations for clockwise, counter-clockwise, and press
XIT	\set_xit, \get_xit, \set_func	Encoder to adjust the XIT offset, press/keypad to toggle XIT on/off

License

This software is published under the MIT License.

Copyright Florian Thienel