Uh oh!
There was an error while loading. Please reload this page.
Fire Hazard - #433
Conversation
The latest updates on your projects. Learn more about Vercel for Git ↗︎
|
Dongathan-Jong
commented
Feb 15, 2025
Looks good to me! You seem to be missing your case files in the production folder though, and also your XIAO should be put right at the edge (so the usb port can be accessed)
|
qcoral
left a comment
There was a problem hiding this comment.
hey! awesome job - couple of things.
could you remove the SEEED library copy in your PR? it takes up a ton of space in the repo!
i would also double check your schematic. a glance looks good but it's pretty messy so just be sure!
DinosaurPotato534
commented
Feb 26, 2025
Hey, Checked over, I think it should work. This was my first time using kicad but I think my routing, although messy, should be OK? |
JustAGlitchFL
commented
Mar 11, 2025
Everything checks out to me |
qcoral
left a comment
There was a problem hiding this comment.
hey - could you remove the libraries from your pcb? they take up alot of space!
DinosaurPotato534
commented
Mar 21, 2025
should be good now? |
qcoral
left a comment
There was a problem hiding this comment.
well that was fast!! nice job oe changes
form here: https://forms.hackclub.com/hackpadv2 - boop!
Ready to submit your project? Nice job! Hopefully you've read the submission guidelines. If not, make sure to read them first.
Check off the following to let the reviewers know you've done everything:
[X] I HAVE RAN DRC ON MY DESIGN WITH ZERO ERRORS (Silkscreen errors are okay)
[X] I HAVE BRANDED ALL MY PARTS (PCB, CASE) WITH MY HACKPAD'S NAME
[X] I HAVE MADE SURE MY 3D PRINTED PARTS DO NOT REQUIRE SUPPORTS (Text branding overhang is okay)
[X] I HAVE MADE SURE TO INCLUDE TOLERANCES (0.25mm)
[X] MY HACKPAD'S PCB IS UNDER 100mm x 100mm, I DO NOT HAVE MORE THAN 16X SWITCHES, 2X ROTARY ENCODERS, 1X OLED, 16X LEDS.
[X] IN MY FOLDER, THERE IS A README.MD FILE THAT CONTAINS THE FOLLOWING INFORMATION:
If you're unsure about the format, make sure to check out this example and follow the format there.
If this PR isn't a submission, that's okay too! Please remove the above boxes and explain what the pull request is for! If there's anything about this PR template that seems confusing, send a message in #hackpad in slack!