Skip to content

DeployorPad V1 Added! - #451

Merged
pmnlla merged 1 commit into
hackclub:mainfrom
deployor:main
Feb 17, 2025
Merged

DeployorPad V1 Added!#451
pmnlla merged 1 commit into
hackclub:mainfrom
deployor:main

Conversation

@deployor

@deployordeployor commented Feb 16, 2025

Copy link
Copy Markdown
Contributor

With this PR i am adding my Hackpad called Deployor Pad to this repo!

Ready to submit your project? Nice job! Hopefully you've read the submission guidelines. If not, make sure to read them first.

Check off the following to let the reviewers know you've done everything:
[X] I HAVE RAN DRC ON MY DESIGN WITH ZERO ERRORS (Silkscreen errors are okay)
[X] I HAVE BRANDED ALL MY PARTS (PCB, CASE) WITH MY HACKPAD'S NAME
[X] I HAVE MADE SURE MY 3D PRINTED PARTS DO NOT REQUIRE SUPPORTS (Text branding overhang is okay)
[X] I HAVE MADE SURE TO INCLUDE TOLERANCES (0.25mm)
[X] MY HACKPAD'S PCB IS UNDER 100mm x 100mm, I DO NOT HAVE MORE THAN 16X SWITCHES, 2X ROTARY ENCODERS, 1X OLED, 16X LEDS.
[X] IN MY FOLDER, THERE IS A README.MD FILE THAT CONTAINS THE FOLLOWING INFORMATION:

  • Full render including all the parts
  • A few sentences about the inspiration and challenges
  • BOM
  • Photos of the Schematic, PCB, and case

If you're unsure about the format, make sure to check out this example and follow the format there.

If this PR isn't a submission, that's okay too! Please remove the above boxes and explain what the pull request is for! If there's anything about this PR template that seems confusing, send a message in #hackpad in slack!

@deployor
DeployorPad V1 Added!
fef0974
With this PR i am adding my Hackpad called Deployor Pad to this repo!
@vercel

vercelBot commented Feb 16, 2025•
edited
Loading

Copy link
Copy Markdown

The latest updates on your projects. Learn more about Vercel for Git ↗︎

NameStatusPreviewCommentsUpdated (UTC)
hackpad✅ Ready (Inspect)Visit Preview💬 Add feedbackFeb 16, 2025 2:10am

@Dongathan-Jong

Dongathan-Jong commented Feb 16, 2025

Copy link
Copy Markdown
Collaborator

Looks good! I have marked this as approved - you will hear from us soon.

@Dongathan-JongDongathan-Jong self-assigned this Feb 16, 2025
@pmnlla

pmnlla commented Feb 17, 2025

Copy link
Copy Markdown
Contributor

The time has come! Fill out this form to receive your HackPad.

@pmnlla
pmnlla merged commit 943fdff into hackclub:mainFeb 17, 2025
@deployordeployor mentioned this pull request Mar 8, 2025
Merged
Sign up for freeto join this conversation on GitHub. Already have an account? Sign in to comment

Reviewers

No reviews

Assignees

@Dongathan-JongDongathan-Jong

Labels

awaiting merge

Projects

None yet

Milestone

No milestone

Development

Successfully merging this pull request may close these issues.

3 participants

@deployor@Dongathan-Jong@pmnlla
, 'i'); if (__m === '*' || __re.test(location.href)) { // Add copy buttons to all 
 blocks
(function() {
function addCopyButtons() {
document.querySelectorAll('pre code').forEach(function(codeBlock) {
if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;
codeBlock.parentElement.setAttribute('data-copy-added', 'true');
var btn = document.createElement('button');
btn.textContent = 'Copy';
btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';
btn.onmouseover = function() { this.style.opacity = '1'; };
btn.onmouseout = function() { this.style.opacity = '0.7'; };
btn.onclick = function() {
navigator.clipboard.writeText(codeBlock.textContent).then(function() {
btn.textContent = 'Copied!';
setTimeout(function() { btn.textContent = 'Copy'; }, 1500);
});
};
codeBlock.parentElement.style.position = 'relative';
codeBlock.parentElement.appendChild(btn);
});
}
addCopyButtons();
// Re-run on dynamic content
var observer = new MutationObserver(addCopyButtons);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '
DeployorPad V1 Added! by deployor · Pull Request #451 · hackclub/hackpad · GitHub
Skip to content
DeployorPad V1 Added! - #451
Merged
pmnlla merged 1 commit into
hackclub:mainfrom 
deployor:main
Feb 17, 2025
Merged
DeployorPad V1 Added!#451
pmnlla merged 1 commit into
hackclub:mainfrom 
deployor:main
Conversation
@deployor
@deployordeployor
commented
Feb 16, 2025

Copy link


Copy Markdown

Contributor
With this PR i am adding my Hackpad called Deployor Pad to this repo!
Ready to submit your project? Nice job! Hopefully you've read the submission guidelines. If not, make sure to read them first.
Check off the following to let the reviewers know you've done everything:

[X] I HAVE RAN DRC ON MY DESIGN WITH ZERO ERRORS (Silkscreen errors are okay)

[X] I HAVE BRANDED ALL MY PARTS (PCB, CASE) WITH MY HACKPAD'S NAME

[X] I HAVE MADE SURE MY 3D PRINTED PARTS DO NOT REQUIRE SUPPORTS (Text branding overhang is okay)

[X] I HAVE MADE SURE TO INCLUDE TOLERANCES (0.25mm)

[X] MY HACKPAD'S PCB IS UNDER 100mm x 100mm, I DO NOT HAVE MORE THAN 16X SWITCHES, 2X ROTARY ENCODERS, 1X OLED, 16X LEDS.

[X] IN MY FOLDER, THERE IS A README.MD FILE THAT CONTAINS THE FOLLOWING INFORMATION:
  • Full render including all the parts
  • A few sentences about the inspiration and challenges
  • BOM
  • Photos of the Schematic, PCB, and case
If you're unsure about the format, make sure to check out this example and follow the format there.
If this PR isn't a submission, that's okay too! Please remove the above boxes and explain what the pull request is for! If there's anything about this PR template that seems confusing, send a message in #hackpad in slack!
@deployor
DeployorPad V1 Added!
fef0974
With this PR i am adding my Hackpad called Deployor Pad to this repo!
@vercel
vercelBot
commented
Feb 16, 2025•

edited

Loading

Copy link


Copy Markdown

The latest updates on your projects. Learn more about Vercel for Git ↗︎
NameStatusPreviewCommentsUpdated (UTC)
hackpad✅ Ready (Inspect)Visit Preview💬 Add feedbackFeb 16, 2025 2:10am
@Dongathan-Jong
Dongathan-Jong
commented
Feb 16, 2025

Copy link


Copy Markdown

Collaborator
Looks good! I have marked this as approved - you will hear from us soon.
@Dongathan-JongDongathan-Jong
self-assigned this
Feb 16, 2025
@pmnlla
pmnlla
commented
Feb 17, 2025

Copy link


Copy Markdown

Contributor
The time has come! Fill out this form to receive your HackPad.
@pmnlla
pmnlla
merged commit 943fdff
into
hackclub:mainFeb 17, 2025
@deployordeployor
mentioned this pull request
Mar 8, 2025
 Merged

Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers


No reviews


Assignees

@Dongathan-JongDongathan-Jong

Labels

awaiting merge

Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

3 participants

@deployor@Dongathan-Jong@pmnlla

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Force GitHub README to respect dark mode
(function() {
var style = document.createElement('style');
style.textContent = '
.markdown-body {
color-scheme: dark light;
}
.markdown-body pre { background: #161b22 !important; }
.markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }
.markdown-body table th, .markdown-body table td { border-color: #30363d !important; }
.markdown-body img { background: #0d1117; }
.markdown-body blockquote { border-left-color: #8b949e; }
.markdown-body hr { border-color: #30363d; }
';
document.head.appendChild(style);
})();
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
DeployorPad V1 Added! by deployor · Pull Request #451 · hackclub/hackpad · GitHub
Skip to content
DeployorPad V1 Added! - #451
Merged
pmnlla merged 1 commit into
hackclub:mainfrom 
deployor:main
Feb 17, 2025
Merged
DeployorPad V1 Added!#451
pmnlla merged 1 commit into
hackclub:mainfrom 
deployor:main
Conversation
@deployor
@deployordeployor
commented
Feb 16, 2025

Copy link


Copy Markdown

Contributor
With this PR i am adding my Hackpad called Deployor Pad to this repo!
Ready to submit your project? Nice job! Hopefully you've read the submission guidelines. If not, make sure to read them first.
Check off the following to let the reviewers know you've done everything:

[X] I HAVE RAN DRC ON MY DESIGN WITH ZERO ERRORS (Silkscreen errors are okay)

[X] I HAVE BRANDED ALL MY PARTS (PCB, CASE) WITH MY HACKPAD'S NAME

[X] I HAVE MADE SURE MY 3D PRINTED PARTS DO NOT REQUIRE SUPPORTS (Text branding overhang is okay)

[X] I HAVE MADE SURE TO INCLUDE TOLERANCES (0.25mm)

[X] MY HACKPAD'S PCB IS UNDER 100mm x 100mm, I DO NOT HAVE MORE THAN 16X SWITCHES, 2X ROTARY ENCODERS, 1X OLED, 16X LEDS.

[X] IN MY FOLDER, THERE IS A README.MD FILE THAT CONTAINS THE FOLLOWING INFORMATION:
  • Full render including all the parts
  • A few sentences about the inspiration and challenges
  • BOM
  • Photos of the Schematic, PCB, and case
If you're unsure about the format, make sure to check out this example and follow the format there.
If this PR isn't a submission, that's okay too! Please remove the above boxes and explain what the pull request is for! If there's anything about this PR template that seems confusing, send a message in #hackpad in slack!
@deployor
DeployorPad V1 Added!
fef0974
With this PR i am adding my Hackpad called Deployor Pad to this repo!
@vercel
vercelBot
commented
Feb 16, 2025•

edited

Loading

Copy link


Copy Markdown

The latest updates on your projects. Learn more about Vercel for Git ↗︎
NameStatusPreviewCommentsUpdated (UTC)
hackpad✅ Ready (Inspect)Visit Preview💬 Add feedbackFeb 16, 2025 2:10am
@Dongathan-Jong
Dongathan-Jong
commented
Feb 16, 2025

Copy link


Copy Markdown

Collaborator
Looks good! I have marked this as approved - you will hear from us soon.
@Dongathan-JongDongathan-Jong
self-assigned this
Feb 16, 2025
@pmnlla
pmnlla
commented
Feb 17, 2025

Copy link


Copy Markdown

Contributor
The time has come! Fill out this form to receive your HackPad.
@pmnlla
pmnlla
merged commit 943fdff
into
hackclub:mainFeb 17, 2025
@deployordeployor
mentioned this pull request
Mar 8, 2025
 Merged

Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers


No reviews


Assignees

@Dongathan-JongDongathan-Jong

Labels

awaiting merge

Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

3 participants

@deployor@Dongathan-Jong@pmnlla

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Highlight search terms from Google/DuckDuckGo/Bing referrer
(function() {
var ref = document.referrer;
var terms = [];
if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {
var url = new URL(ref);
var q = url.searchParams.get('q') || url.searchParams.get('p');
if (q) {
terms = q.split(/\s+/).filter(function(t) { return t.length > 2; });
}
}
if (terms.length === 0) return;
var style = document.createElement('style');
style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';
document.head.appendChild(style);
function highlight(node) {
if (node.nodeType === 3) { // text node
var text = node.textContent;
var found = false;
terms.forEach(function(term) {
var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\]\\]/g, '\\') + ')', 'gi');
if (regex.test(text)) {
found = true;
var frag = document.createDocumentFragment();
var parts = text.split(regex);
parts.forEach(function(part, i) {
if (i % 2 === 0) {
frag.appendChild(document.createTextNode(part));
} else {
var span = document.createElement('span');
span.className = 'userscript-highlight';
span.textContent = part;
frag.appendChild(span);
}
});
node.parentNode.replaceChild(frag, node);
}
});
} else if (node.nodeType === 1 && node.childNodes) { // element
var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];
if (!skipTags.includes(node.tagName)) {
Array.from(node.childNodes).forEach(highlight);
}
}
}
highlight(document.body);
// Re-highlight on dynamic content
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1 || node.nodeType === 3) highlight(node);
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
DeployorPad V1 Added! by deployor · Pull Request #451 · hackclub/hackpad · GitHub
Skip to content
DeployorPad V1 Added! - #451
Merged
pmnlla merged 1 commit into
hackclub:mainfrom 
deployor:main
Feb 17, 2025
Merged
DeployorPad V1 Added!#451
pmnlla merged 1 commit into
hackclub:mainfrom 
deployor:main
Conversation
@deployor
@deployordeployor
commented
Feb 16, 2025

Copy link


Copy Markdown

Contributor
With this PR i am adding my Hackpad called Deployor Pad to this repo!
Ready to submit your project? Nice job! Hopefully you've read the submission guidelines. If not, make sure to read them first.
Check off the following to let the reviewers know you've done everything:

[X] I HAVE RAN DRC ON MY DESIGN WITH ZERO ERRORS (Silkscreen errors are okay)

[X] I HAVE BRANDED ALL MY PARTS (PCB, CASE) WITH MY HACKPAD'S NAME

[X] I HAVE MADE SURE MY 3D PRINTED PARTS DO NOT REQUIRE SUPPORTS (Text branding overhang is okay)

[X] I HAVE MADE SURE TO INCLUDE TOLERANCES (0.25mm)

[X] MY HACKPAD'S PCB IS UNDER 100mm x 100mm, I DO NOT HAVE MORE THAN 16X SWITCHES, 2X ROTARY ENCODERS, 1X OLED, 16X LEDS.

[X] IN MY FOLDER, THERE IS A README.MD FILE THAT CONTAINS THE FOLLOWING INFORMATION:
  • Full render including all the parts
  • A few sentences about the inspiration and challenges
  • BOM
  • Photos of the Schematic, PCB, and case
If you're unsure about the format, make sure to check out this example and follow the format there.
If this PR isn't a submission, that's okay too! Please remove the above boxes and explain what the pull request is for! If there's anything about this PR template that seems confusing, send a message in #hackpad in slack!
@deployor
DeployorPad V1 Added!
fef0974
With this PR i am adding my Hackpad called Deployor Pad to this repo!
@vercel
vercelBot
commented
Feb 16, 2025•

edited

Loading

Copy link


Copy Markdown

The latest updates on your projects. Learn more about Vercel for Git ↗︎
NameStatusPreviewCommentsUpdated (UTC)
hackpad✅ Ready (Inspect)Visit Preview💬 Add feedbackFeb 16, 2025 2:10am
@Dongathan-Jong
Dongathan-Jong
commented
Feb 16, 2025

Copy link


Copy Markdown

Collaborator
Looks good! I have marked this as approved - you will hear from us soon.
@Dongathan-JongDongathan-Jong
self-assigned this
Feb 16, 2025
@pmnlla
pmnlla
commented
Feb 17, 2025

Copy link


Copy Markdown

Contributor
The time has come! Fill out this form to receive your HackPad.
@pmnlla
pmnlla
merged commit 943fdff
into
hackclub:mainFeb 17, 2025
@deployordeployor
mentioned this pull request
Mar 8, 2025
 Merged

Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers


No reviews


Assignees

@Dongathan-JongDongathan-Jong

Labels

awaiting merge

Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

3 participants

@deployor@Dongathan-Jong@pmnlla

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Strip utm_, fbclid, gclid, etc. from all links on page
(function() {
var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',
'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',
'ref', 'ref_src', 'source', 'medium', 'campaign'];
function cleanUrl(url) {
try {
var u = new URL(url, window.location.origin);
var changed = false;
trackingParams.forEach(function(p) {
if (u.searchParams.has(p)) {
u.searchParams.delete(p);
changed = true;
}
});
return changed ? u.toString() : url;
} catch (e) {
return url;
}
}
function cleanLinks() {
document.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
cleanLinks();
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1) {
if (node.tagName === 'A') cleanLinks();
node.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '
DeployorPad V1 Added! by deployor · Pull Request #451 · hackclub/hackpad · GitHub
Skip to content
DeployorPad V1 Added! - #451
Merged
pmnlla merged 1 commit into
hackclub:mainfrom 
deployor:main
Feb 17, 2025
Merged
DeployorPad V1 Added!#451
pmnlla merged 1 commit into
hackclub:mainfrom 
deployor:main
Conversation
@deployor
@deployordeployor
commented
Feb 16, 2025

Copy link


Copy Markdown

Contributor
With this PR i am adding my Hackpad called Deployor Pad to this repo!
Ready to submit your project? Nice job! Hopefully you've read the submission guidelines. If not, make sure to read them first.
Check off the following to let the reviewers know you've done everything:

[X] I HAVE RAN DRC ON MY DESIGN WITH ZERO ERRORS (Silkscreen errors are okay)

[X] I HAVE BRANDED ALL MY PARTS (PCB, CASE) WITH MY HACKPAD'S NAME

[X] I HAVE MADE SURE MY 3D PRINTED PARTS DO NOT REQUIRE SUPPORTS (Text branding overhang is okay)

[X] I HAVE MADE SURE TO INCLUDE TOLERANCES (0.25mm)

[X] MY HACKPAD'S PCB IS UNDER 100mm x 100mm, I DO NOT HAVE MORE THAN 16X SWITCHES, 2X ROTARY ENCODERS, 1X OLED, 16X LEDS.

[X] IN MY FOLDER, THERE IS A README.MD FILE THAT CONTAINS THE FOLLOWING INFORMATION:
  • Full render including all the parts
  • A few sentences about the inspiration and challenges
  • BOM
  • Photos of the Schematic, PCB, and case
If you're unsure about the format, make sure to check out this example and follow the format there.
If this PR isn't a submission, that's okay too! Please remove the above boxes and explain what the pull request is for! If there's anything about this PR template that seems confusing, send a message in #hackpad in slack!
@deployor
DeployorPad V1 Added!
fef0974
With this PR i am adding my Hackpad called Deployor Pad to this repo!
@vercel
vercelBot
commented
Feb 16, 2025•

edited

Loading

Copy link


Copy Markdown

The latest updates on your projects. Learn more about Vercel for Git ↗︎
NameStatusPreviewCommentsUpdated (UTC)
hackpad✅ Ready (Inspect)Visit Preview💬 Add feedbackFeb 16, 2025 2:10am
@Dongathan-Jong
Dongathan-Jong
commented
Feb 16, 2025

Copy link


Copy Markdown

Collaborator
Looks good! I have marked this as approved - you will hear from us soon.
@Dongathan-JongDongathan-Jong
self-assigned this
Feb 16, 2025
@pmnlla
pmnlla
commented
Feb 17, 2025

Copy link


Copy Markdown

Contributor
The time has come! Fill out this form to receive your HackPad.
@pmnlla
pmnlla
merged commit 943fdff
into
hackclub:mainFeb 17, 2025
@deployordeployor
mentioned this pull request
Mar 8, 2025
 Merged

Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers


No reviews


Assignees

@Dongathan-JongDongathan-Jong

Labels

awaiting merge

Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

3 participants

@deployor@Dongathan-Jong@pmnlla

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Auto-enable theater mode on YouTube
(function() {
function tryTheater() {
var btn = document.querySelector('button[aria-label="Theater mode"], ytd-player #player button[title="Theater mode"]');
if (btn && !btn.classList.contains('activated')) {
btn.click();
}
}
// Try immediately
tryTheater();
// Try after navigation (SPA)
var lastUrl = location.href;
setInterval(function() {
if (location.href !== lastUrl) {
lastUrl = location.href;
setTimeout(tryTheater, 500);
}
}, 1000);
// Also try on player load
var observer = new MutationObserver(tryTheater);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
DeployorPad V1 Added! by deployor · Pull Request #451 · hackclub/hackpad · GitHub
Skip to content
DeployorPad V1 Added! - #451
Merged
pmnlla merged 1 commit into
hackclub:mainfrom 
deployor:main
Feb 17, 2025
Merged
DeployorPad V1 Added!#451
pmnlla merged 1 commit into
hackclub:mainfrom 
deployor:main
Conversation
@deployor
@deployordeployor
commented
Feb 16, 2025

Copy link


Copy Markdown

Contributor
With this PR i am adding my Hackpad called Deployor Pad to this repo!
Ready to submit your project? Nice job! Hopefully you've read the submission guidelines. If not, make sure to read them first.
Check off the following to let the reviewers know you've done everything:

[X] I HAVE RAN DRC ON MY DESIGN WITH ZERO ERRORS (Silkscreen errors are okay)

[X] I HAVE BRANDED ALL MY PARTS (PCB, CASE) WITH MY HACKPAD'S NAME

[X] I HAVE MADE SURE MY 3D PRINTED PARTS DO NOT REQUIRE SUPPORTS (Text branding overhang is okay)

[X] I HAVE MADE SURE TO INCLUDE TOLERANCES (0.25mm)

[X] MY HACKPAD'S PCB IS UNDER 100mm x 100mm, I DO NOT HAVE MORE THAN 16X SWITCHES, 2X ROTARY ENCODERS, 1X OLED, 16X LEDS.

[X] IN MY FOLDER, THERE IS A README.MD FILE THAT CONTAINS THE FOLLOWING INFORMATION:
  • Full render including all the parts
  • A few sentences about the inspiration and challenges
  • BOM
  • Photos of the Schematic, PCB, and case
If you're unsure about the format, make sure to check out this example and follow the format there.
If this PR isn't a submission, that's okay too! Please remove the above boxes and explain what the pull request is for! If there's anything about this PR template that seems confusing, send a message in #hackpad in slack!
@deployor
DeployorPad V1 Added!
fef0974
With this PR i am adding my Hackpad called Deployor Pad to this repo!
@vercel
vercelBot
commented
Feb 16, 2025•

edited

Loading

Copy link


Copy Markdown

The latest updates on your projects. Learn more about Vercel for Git ↗︎
NameStatusPreviewCommentsUpdated (UTC)
hackpad✅ Ready (Inspect)Visit Preview💬 Add feedbackFeb 16, 2025 2:10am
@Dongathan-Jong
Dongathan-Jong
commented
Feb 16, 2025

Copy link


Copy Markdown

Collaborator
Looks good! I have marked this as approved - you will hear from us soon.
@Dongathan-JongDongathan-Jong
self-assigned this
Feb 16, 2025
@pmnlla
pmnlla
commented
Feb 17, 2025

Copy link


Copy Markdown

Contributor
The time has come! Fill out this form to receive your HackPad.
@pmnlla
pmnlla
merged commit 943fdff
into
hackclub:mainFeb 17, 2025
@deployordeployor
mentioned this pull request
Mar 8, 2025
 Merged

Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers


No reviews


Assignees

@Dongathan-JongDongathan-Jong

Labels

awaiting merge

Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

3 participants

@deployor@Dongathan-Jong@pmnlla

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Remove or un-stick sticky/fixed headers that block content
(function() {
function unstick() {
document.querySelectorAll('header, nav, [role="banner"], .header, .navbar, .sticky, .fixed-top, [style*="position: fixed"], [style*="position:sticky"]').forEach(function(el) {
if (el.style.position === 'fixed' || el.style.position === 'sticky' || getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {
el.style.position = 'static';
el.style.top = 'auto';
el.style.zIndex = 'auto';
}
});
}
unstick();
var observer = new MutationObserver(unstick);
observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });
})();
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
})();
DeployorPad V1 Added! by deployor · Pull Request #451 · hackclub/hackpad · GitHub
Skip to content
DeployorPad V1 Added! - #451
Merged
pmnlla merged 1 commit into
hackclub:mainfrom 
deployor:main
Feb 17, 2025
Merged
DeployorPad V1 Added!#451
pmnlla merged 1 commit into
hackclub:mainfrom 
deployor:main
Conversation
@deployor
@deployordeployor
commented
Feb 16, 2025

Copy link


Copy Markdown

Contributor
With this PR i am adding my Hackpad called Deployor Pad to this repo!
Ready to submit your project? Nice job! Hopefully you've read the submission guidelines. If not, make sure to read them first.
Check off the following to let the reviewers know you've done everything:

[X] I HAVE RAN DRC ON MY DESIGN WITH ZERO ERRORS (Silkscreen errors are okay)

[X] I HAVE BRANDED ALL MY PARTS (PCB, CASE) WITH MY HACKPAD'S NAME

[X] I HAVE MADE SURE MY 3D PRINTED PARTS DO NOT REQUIRE SUPPORTS (Text branding overhang is okay)

[X] I HAVE MADE SURE TO INCLUDE TOLERANCES (0.25mm)

[X] MY HACKPAD'S PCB IS UNDER 100mm x 100mm, I DO NOT HAVE MORE THAN 16X SWITCHES, 2X ROTARY ENCODERS, 1X OLED, 16X LEDS.

[X] IN MY FOLDER, THERE IS A README.MD FILE THAT CONTAINS THE FOLLOWING INFORMATION:
  • Full render including all the parts
  • A few sentences about the inspiration and challenges
  • BOM
  • Photos of the Schematic, PCB, and case
If you're unsure about the format, make sure to check out this example and follow the format there.
If this PR isn't a submission, that's okay too! Please remove the above boxes and explain what the pull request is for! If there's anything about this PR template that seems confusing, send a message in #hackpad in slack!
@deployor
DeployorPad V1 Added!
fef0974
With this PR i am adding my Hackpad called Deployor Pad to this repo!
@vercel
vercelBot
commented
Feb 16, 2025•

edited

Loading

Copy link


Copy Markdown

The latest updates on your projects. Learn more about Vercel for Git ↗︎
NameStatusPreviewCommentsUpdated (UTC)
hackpad✅ Ready (Inspect)Visit Preview💬 Add feedbackFeb 16, 2025 2:10am
@Dongathan-Jong
Dongathan-Jong
commented
Feb 16, 2025

Copy link


Copy Markdown

Collaborator
Looks good! I have marked this as approved - you will hear from us soon.
@Dongathan-JongDongathan-Jong
self-assigned this
Feb 16, 2025
@pmnlla
pmnlla
commented
Feb 17, 2025

Copy link


Copy Markdown

Contributor
The time has come! Fill out this form to receive your HackPad.
@pmnlla
pmnlla
merged commit 943fdff
into
hackclub:mainFeb 17, 2025
@deployordeployor
mentioned this pull request
Mar 8, 2025
 Merged

Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers


No reviews


Assignees

@Dongathan-JongDongathan-Jong

Labels

awaiting merge

Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

3 participants

@deployor@Dongathan-Jong@pmnlla