Add BluePunia's Pad - #546

Merged
Dongathan-Jong merged 10 commits into
hackclub:mainfrom
BluePunia:main
Mar 10, 2025
Merged

Add BluePunia's Pad#546
Dongathan-Jong merged 10 commits into
hackclub:mainfrom
BluePunia:main

Conversation

@BluePunia

@BluePuniaBluePunia commented Feb 19, 2025

Copy link
Copy Markdown
Contributor

Check off the following to let the reviewers know you've done everything:
[Y] I HAVE RAN DRC ON MY DESIGN WITH ZERO ERRORS (Silkscreen errors are okay)
[Y] I HAVE BRANDED ALL MY PARTS (PCB, CASE) WITH MY HACKPAD'S NAME
[Y] I HAVE MADE SURE MY 3D PRINTED PARTS DO NOT REQUIRE SUPPORTS (Text branding overhang is okay)
[Y] I HAVE MADE SURE TO INCLUDE TOLERANCES (0.25mm)
[Y] MY HACKPAD'S PCB IS UNDER 100mm x 100mm, I DO NOT HAVE MORE THAN 16X SWITCHES, 2X ROTARY ENCODERS, 1X OLED, 16X LEDS.
[Y] IN MY FOLDER, THERE IS A README.MD FILE THAT CONTAINS THE FOLLOWING INFORMATION:

  • Full render including all the parts
  • A few sentences about the inspiration and challenges
  • BOM
  • Photos of the Schematic, PCB, and case

@vercel

vercelBot commented Feb 19, 2025•
edited
Loading

Copy link
Copy Markdown

The latest updates on your projects. Learn more about Vercel for Git ↗︎

NameStatusPreviewCommentsUpdated (UTC)
hackpad✅ Ready (Inspect)Visit Preview💬 Add feedbackFeb 25, 2025 0:02am

M0HID
M0HID previously approved these changes Feb 24, 2025
View reviewed changes

@M0HIDM0HID left a comment •
edited
Loading

Copy link
Copy Markdown
Collaborator

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Awesome work on this!! You can order your Hackpad here!

@M0HID
M0HID dismissed their stale reviewFebruary 24, 2025 21:33

no branding on case

M0HID
M0HID requested changes Feb 24, 2025
View reviewed changes

@M0HIDM0HID left a comment

Copy link
Copy Markdown
Collaborator

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Hi! Great work on this so far but it looks like you forgot to put your name on the case/pcb! Could you add that please and then i can approve this!

@M0HIDM0HID self-assigned this Feb 24, 2025
@BluePunia

BluePunia commented Feb 24, 2025

Copy link
Copy Markdown
ContributorAuthor

Hi! I've put the branding from the bottom on the bottom side of the case. If you go into CAD/how_the_hackpad_should_look.step then look at it from the bottom you'll see it.
obraz_2025-02-24_224955603

@BluePunia
BluePunia requested a review from M0HIDFebruary 24, 2025 21:50
@BluePunia

BluePunia commented Feb 24, 2025

Copy link
Copy Markdown
ContributorAuthor

I think I've also added my branding on the PCB.
image
image
I'm very sorry if there's something I've done wrong and don't understand it - I'm a newbie in both PCB and CAD designing :ccc

@M0HID

M0HID commented Feb 24, 2025

Copy link
Copy Markdown
Collaborator

image
Your PCB is fine, just the inset branding on your case seems to be filled in, so it won't actually print (see image for better explanation) If you could fix that that would be great

@vercel

vercelBot commented Feb 24, 2025

Copy link
Copy Markdown

Deployment failed with the following error:

The provided GitHub repository does not contain the requested branch or commit reference. Please ensure the repository is not empty.

@BluePunia

BluePunia commented Feb 24, 2025

Copy link
Copy Markdown
ContributorAuthor

I've changed it!
(I've only put the right version of the file in the production/BluePunia's.bottomside v2, didn't put it in the CAD/how_the_hackpad_should_look.step)
Hope it works!

@Jan-Kur

Jan-Kur commented Mar 10, 2025

Copy link
Copy Markdown
Contributor

I approve of this submission! Here's my approved hackpad: #549

@kapitalnyy

kapitalnyy commented Mar 10, 2025

Copy link
Copy Markdown
Contributor

I approve of this submission, here is my already approved and merged pull request: #552

@Dongathan-Jong

Dongathan-Jong commented Mar 10, 2025

Copy link
Copy Markdown
Collaborator

Good stuff! You can order your Hackpad here!

@Dongathan-Jong
Dongathan-Jong merged commit 05ffdc9 into hackclub:mainMar 10, 2025
Sign up for freeto join this conversation on GitHub. Already have an account? Sign in to comment

Reviewers

@M0HIDM0HIDAwaiting requested review from M0HID

Assignees

@M0HIDM0HID

Labels

None yet

Projects

None yet

Milestone

No milestone

Development

Successfully merging this pull request may close these issues.

5 participants

@BluePunia@M0HID@Jan-Kur@kapitalnyy@Dongathan-Jong
, 'i'); if (__m === '*' || __re.test(location.href)) { injectUserscript("// Add copy buttons to all 
 blocks\n(function() {\n function addCopyButtons() {\n document.querySelectorAll('pre code').forEach(function(codeBlock) {\n if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;\n codeBlock.parentElement.setAttribute('data-copy-added', 'true');\n \n var btn = document.createElement('button');\n btn.textContent = 'Copy';\n btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';\n btn.onmouseover = function() { this.style.opacity = '1'; };\n btn.onmouseout = function() { this.style.opacity = '0.7'; };\n btn.onclick = function() {\n navigator.clipboard.writeText(codeBlock.textContent).then(function() {\n btn.textContent = 'Copied!';\n setTimeout(function() { btn.textContent = 'Copy'; }, 1500);\n });\n };\n codeBlock.parentElement.style.position = 'relative';\n codeBlock.parentElement.appendChild(btn);\n });\n }\n \n addCopyButtons();\n \n // Re-run on dynamic content\n var observer = new MutationObserver(addCopyButtons);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Add Copy Buttons to Code Blocks");
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content
Add BluePunia's Pad - #546
Merged
Dongathan-Jong merged 10 commits into
hackclub:mainfrom 
BluePunia:main
Mar 10, 2025
Merged
Add BluePunia's Pad#546
Dongathan-Jong merged 10 commits into
hackclub:mainfrom 
BluePunia:main
Conversation
@BluePunia
@BluePuniaBluePunia
commented
Feb 19, 2025

Copy link


Copy Markdown

Contributor
Check off the following to let the reviewers know you've done everything:

[Y] I HAVE RAN DRC ON MY DESIGN WITH ZERO ERRORS (Silkscreen errors are okay)

[Y] I HAVE BRANDED ALL MY PARTS (PCB, CASE) WITH MY HACKPAD'S NAME

[Y] I HAVE MADE SURE MY 3D PRINTED PARTS DO NOT REQUIRE SUPPORTS (Text branding overhang is okay)

[Y] I HAVE MADE SURE TO INCLUDE TOLERANCES (0.25mm)

[Y] MY HACKPAD'S PCB IS UNDER 100mm x 100mm, I DO NOT HAVE MORE THAN 16X SWITCHES, 2X ROTARY ENCODERS, 1X OLED, 16X LEDS.

[Y] IN MY FOLDER, THERE IS A README.MD FILE THAT CONTAINS THE FOLLOWING INFORMATION:
  • Full render including all the parts
  • A few sentences about the inspiration and challenges
  • BOM
  • Photos of the Schematic, PCB, and case
@vercel
vercelBot
commented
Feb 19, 2025•

edited

Loading

Copy link


Copy Markdown

The latest updates on your projects. Learn more about Vercel for Git ↗︎
NameStatusPreviewCommentsUpdated (UTC)
hackpad✅ Ready (Inspect)Visit Preview💬 Add feedbackFeb 25, 2025 0:02am
M0HID
M0HID
previously approved these changes
Feb 24, 2025
View reviewed changes
@M0HIDM0HID
left a comment
•

edited

Loading

Copy link


Copy Markdown

Collaborator
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Awesome work on this!! You can order your Hackpad here!
@M0HID
M0HID
dismissed
their stale reviewFebruary 24, 2025 21:33
no branding on case
M0HID
M0HID
requested changes
Feb 24, 2025
View reviewed changes
@M0HIDM0HID
left a comment


Copy link


Copy Markdown

Collaborator
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Hi! Great work on this so far but it looks like you forgot to put your name on the case/pcb! Could you add that please and then i can approve this!
@M0HIDM0HID
self-assigned this
Feb 24, 2025
@BluePunia
BluePunia
commented
Feb 24, 2025

Copy link


Copy Markdown

ContributorAuthor
Hi! I've put the branding from the bottom on the bottom side of the case. If you go into CAD/how_the_hackpad_should_look.step then look at it from the bottom you'll see it.
obraz_2025-02-24_224955603
@BluePunia
BluePunia
requested a review
from M0HIDFebruary 24, 2025 21:50
@BluePunia
BluePunia
commented
Feb 24, 2025

Copy link


Copy Markdown

ContributorAuthor
I think I've also added my branding on the PCB.
image
image

I'm very sorry if there's something I've done wrong and don't understand it - I'm a newbie in both PCB and CAD designing :ccc
@M0HID
M0HID
commented
Feb 24, 2025

Copy link


Copy Markdown

Collaborator
image

Your PCB is fine, just the inset branding on your case seems to be filled in, so it won't actually print (see image for better explanation) If you could fix that that would be great
@vercel
vercelBot
commented
Feb 24, 2025

Copy link


Copy Markdown

Deployment failed with the following error:
The provided GitHub repository does not contain the requested branch or commit reference. Please ensure the repository is not empty.

@BluePunia
BluePunia
commented
Feb 24, 2025

Copy link


Copy Markdown

ContributorAuthor
I've changed it!

(I've only put the right version of the file in the production/BluePunia's.bottomside v2, didn't put it in the CAD/how_the_hackpad_should_look.step)

Hope it works!
@Jan-Kur
Jan-Kur
commented
Mar 10, 2025

Copy link


Copy Markdown

Contributor
I approve of this submission! Here's my approved hackpad: #549
@kapitalnyy
kapitalnyy
commented
Mar 10, 2025

Copy link


Copy Markdown

Contributor
I approve of this submission, here is my already approved and merged pull request: #552
@Dongathan-Jong
Dongathan-Jong
commented
Mar 10, 2025

Copy link


Copy Markdown

Collaborator
Good stuff! You can order your Hackpad here!
@Dongathan-Jong
Dongathan-Jong
merged commit 05ffdc9
into
hackclub:mainMar 10, 2025
Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers

@M0HIDM0HIDAwaiting requested review from M0HID

Assignees

@M0HIDM0HID

Labels


None yet


Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

5 participants

@BluePunia@M0HID@Jan-Kur@kapitalnyy@Dongathan-Jong

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Force GitHub README to respect dark mode\n(function() {\n var style = document.createElement('style');\n style.textContent = '\n .markdown-body {\n color-scheme: dark light;\n }\n .markdown-body pre { background: #161b22 !important; }\n .markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }\n .markdown-body table th, .markdown-body table td { border-color: #30363d !important; }\n .markdown-body img { background: #0d1117; }\n .markdown-body blockquote { border-left-color: #8b949e; }\n .markdown-body hr { border-color: #30363d; }\n ';\n document.head.appendChild(style);\n})();", "GitHub Dark Mode README Fix");
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
Add BluePunia's Pad - #546
Merged
Dongathan-Jong merged 10 commits into
hackclub:mainfrom 
BluePunia:main
Mar 10, 2025
Merged
Add BluePunia's Pad#546
Dongathan-Jong merged 10 commits into
hackclub:mainfrom 
BluePunia:main
Conversation
@BluePunia
@BluePuniaBluePunia
commented
Feb 19, 2025

Copy link


Copy Markdown

Contributor
Check off the following to let the reviewers know you've done everything:

[Y] I HAVE RAN DRC ON MY DESIGN WITH ZERO ERRORS (Silkscreen errors are okay)

[Y] I HAVE BRANDED ALL MY PARTS (PCB, CASE) WITH MY HACKPAD'S NAME

[Y] I HAVE MADE SURE MY 3D PRINTED PARTS DO NOT REQUIRE SUPPORTS (Text branding overhang is okay)

[Y] I HAVE MADE SURE TO INCLUDE TOLERANCES (0.25mm)

[Y] MY HACKPAD'S PCB IS UNDER 100mm x 100mm, I DO NOT HAVE MORE THAN 16X SWITCHES, 2X ROTARY ENCODERS, 1X OLED, 16X LEDS.

[Y] IN MY FOLDER, THERE IS A README.MD FILE THAT CONTAINS THE FOLLOWING INFORMATION:
  • Full render including all the parts
  • A few sentences about the inspiration and challenges
  • BOM
  • Photos of the Schematic, PCB, and case
@vercel
vercelBot
commented
Feb 19, 2025•

edited

Loading

Copy link


Copy Markdown

The latest updates on your projects. Learn more about Vercel for Git ↗︎
NameStatusPreviewCommentsUpdated (UTC)
hackpad✅ Ready (Inspect)Visit Preview💬 Add feedbackFeb 25, 2025 0:02am
M0HID
M0HID
previously approved these changes
Feb 24, 2025
View reviewed changes
@M0HIDM0HID
left a comment
•

edited

Loading

Copy link


Copy Markdown

Collaborator
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Awesome work on this!! You can order your Hackpad here!
@M0HID
M0HID
dismissed
their stale reviewFebruary 24, 2025 21:33
no branding on case
M0HID
M0HID
requested changes
Feb 24, 2025
View reviewed changes
@M0HIDM0HID
left a comment


Copy link


Copy Markdown

Collaborator
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Hi! Great work on this so far but it looks like you forgot to put your name on the case/pcb! Could you add that please and then i can approve this!
@M0HIDM0HID
self-assigned this
Feb 24, 2025
@BluePunia
BluePunia
commented
Feb 24, 2025

Copy link


Copy Markdown

ContributorAuthor
Hi! I've put the branding from the bottom on the bottom side of the case. If you go into CAD/how_the_hackpad_should_look.step then look at it from the bottom you'll see it.
obraz_2025-02-24_224955603
@BluePunia
BluePunia
requested a review
from M0HIDFebruary 24, 2025 21:50
@BluePunia
BluePunia
commented
Feb 24, 2025

Copy link


Copy Markdown

ContributorAuthor
I think I've also added my branding on the PCB.
image
image

I'm very sorry if there's something I've done wrong and don't understand it - I'm a newbie in both PCB and CAD designing :ccc
@M0HID
M0HID
commented
Feb 24, 2025

Copy link


Copy Markdown

Collaborator
image

Your PCB is fine, just the inset branding on your case seems to be filled in, so it won't actually print (see image for better explanation) If you could fix that that would be great
@vercel
vercelBot
commented
Feb 24, 2025

Copy link


Copy Markdown

Deployment failed with the following error:
The provided GitHub repository does not contain the requested branch or commit reference. Please ensure the repository is not empty.

@BluePunia
BluePunia
commented
Feb 24, 2025

Copy link


Copy Markdown

ContributorAuthor
I've changed it!

(I've only put the right version of the file in the production/BluePunia's.bottomside v2, didn't put it in the CAD/how_the_hackpad_should_look.step)

Hope it works!
@Jan-Kur
Jan-Kur
commented
Mar 10, 2025

Copy link


Copy Markdown

Contributor
I approve of this submission! Here's my approved hackpad: #549
@kapitalnyy
kapitalnyy
commented
Mar 10, 2025

Copy link


Copy Markdown

Contributor
I approve of this submission, here is my already approved and merged pull request: #552
@Dongathan-Jong
Dongathan-Jong
commented
Mar 10, 2025

Copy link


Copy Markdown

Collaborator
Good stuff! You can order your Hackpad here!
@Dongathan-Jong
Dongathan-Jong
merged commit 05ffdc9
into
hackclub:mainMar 10, 2025
Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers

@M0HIDM0HIDAwaiting requested review from M0HID

Assignees

@M0HIDM0HID

Labels


None yet


Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

5 participants

@BluePunia@M0HID@Jan-Kur@kapitalnyy@Dongathan-Jong

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Highlight search terms from Google/DuckDuckGo/Bing referrer\n(function() {\n var ref = document.referrer;\n var terms = [];\n \n if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {\n var url = new URL(ref);\n var q = url.searchParams.get('q') || url.searchParams.get('p');\n if (q) {\n terms = q.split(/\\s+/).filter(function(t) { return t.length > 2; });\n }\n }\n \n if (terms.length === 0) return;\n \n var style = document.createElement('style');\n style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';\n document.head.appendChild(style);\n \n function highlight(node) {\n if (node.nodeType === 3) { // text node\n var text = node.textContent;\n var found = false;\n terms.forEach(function(term) {\n var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\\]\\\\]/g, '\\\\') + ')', 'gi');\n if (regex.test(text)) {\n found = true;\n var frag = document.createDocumentFragment();\n var parts = text.split(regex);\n parts.forEach(function(part, i) {\n if (i % 2 === 0) {\n frag.appendChild(document.createTextNode(part));\n } else {\n var span = document.createElement('span');\n span.className = 'userscript-highlight';\n span.textContent = part;\n frag.appendChild(span);\n }\n });\n node.parentNode.replaceChild(frag, node);\n }\n });\n } else if (node.nodeType === 1 && node.childNodes) { // element\n var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];\n if (!skipTags.includes(node.tagName)) {\n Array.from(node.childNodes).forEach(highlight);\n }\n }\n }\n \n highlight(document.body);\n \n // Re-highlight on dynamic content\n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1 || node.nodeType === 3) highlight(node);\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Highlight Search Terms");
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
Add BluePunia's Pad - #546
Merged
Dongathan-Jong merged 10 commits into
hackclub:mainfrom 
BluePunia:main
Mar 10, 2025
Merged
Add BluePunia's Pad#546
Dongathan-Jong merged 10 commits into
hackclub:mainfrom 
BluePunia:main
Conversation
@BluePunia
@BluePuniaBluePunia
commented
Feb 19, 2025

Copy link


Copy Markdown

Contributor
Check off the following to let the reviewers know you've done everything:

[Y] I HAVE RAN DRC ON MY DESIGN WITH ZERO ERRORS (Silkscreen errors are okay)

[Y] I HAVE BRANDED ALL MY PARTS (PCB, CASE) WITH MY HACKPAD'S NAME

[Y] I HAVE MADE SURE MY 3D PRINTED PARTS DO NOT REQUIRE SUPPORTS (Text branding overhang is okay)

[Y] I HAVE MADE SURE TO INCLUDE TOLERANCES (0.25mm)

[Y] MY HACKPAD'S PCB IS UNDER 100mm x 100mm, I DO NOT HAVE MORE THAN 16X SWITCHES, 2X ROTARY ENCODERS, 1X OLED, 16X LEDS.

[Y] IN MY FOLDER, THERE IS A README.MD FILE THAT CONTAINS THE FOLLOWING INFORMATION:
  • Full render including all the parts
  • A few sentences about the inspiration and challenges
  • BOM
  • Photos of the Schematic, PCB, and case
@vercel
vercelBot
commented
Feb 19, 2025•

edited

Loading

Copy link


Copy Markdown

The latest updates on your projects. Learn more about Vercel for Git ↗︎
NameStatusPreviewCommentsUpdated (UTC)
hackpad✅ Ready (Inspect)Visit Preview💬 Add feedbackFeb 25, 2025 0:02am
M0HID
M0HID
previously approved these changes
Feb 24, 2025
View reviewed changes
@M0HIDM0HID
left a comment
•

edited

Loading

Copy link


Copy Markdown

Collaborator
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Awesome work on this!! You can order your Hackpad here!
@M0HID
M0HID
dismissed
their stale reviewFebruary 24, 2025 21:33
no branding on case
M0HID
M0HID
requested changes
Feb 24, 2025
View reviewed changes
@M0HIDM0HID
left a comment


Copy link


Copy Markdown

Collaborator
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Hi! Great work on this so far but it looks like you forgot to put your name on the case/pcb! Could you add that please and then i can approve this!
@M0HIDM0HID
self-assigned this
Feb 24, 2025
@BluePunia
BluePunia
commented
Feb 24, 2025

Copy link


Copy Markdown

ContributorAuthor
Hi! I've put the branding from the bottom on the bottom side of the case. If you go into CAD/how_the_hackpad_should_look.step then look at it from the bottom you'll see it.
obraz_2025-02-24_224955603
@BluePunia
BluePunia
requested a review
from M0HIDFebruary 24, 2025 21:50
@BluePunia
BluePunia
commented
Feb 24, 2025

Copy link


Copy Markdown

ContributorAuthor
I think I've also added my branding on the PCB.
image
image

I'm very sorry if there's something I've done wrong and don't understand it - I'm a newbie in both PCB and CAD designing :ccc
@M0HID
M0HID
commented
Feb 24, 2025

Copy link


Copy Markdown

Collaborator
image

Your PCB is fine, just the inset branding on your case seems to be filled in, so it won't actually print (see image for better explanation) If you could fix that that would be great
@vercel
vercelBot
commented
Feb 24, 2025

Copy link


Copy Markdown

Deployment failed with the following error:
The provided GitHub repository does not contain the requested branch or commit reference. Please ensure the repository is not empty.

@BluePunia
BluePunia
commented
Feb 24, 2025

Copy link


Copy Markdown

ContributorAuthor
I've changed it!

(I've only put the right version of the file in the production/BluePunia's.bottomside v2, didn't put it in the CAD/how_the_hackpad_should_look.step)

Hope it works!
@Jan-Kur
Jan-Kur
commented
Mar 10, 2025

Copy link


Copy Markdown

Contributor
I approve of this submission! Here's my approved hackpad: #549
@kapitalnyy
kapitalnyy
commented
Mar 10, 2025

Copy link


Copy Markdown

Contributor
I approve of this submission, here is my already approved and merged pull request: #552
@Dongathan-Jong
Dongathan-Jong
commented
Mar 10, 2025

Copy link


Copy Markdown

Collaborator
Good stuff! You can order your Hackpad here!
@Dongathan-Jong
Dongathan-Jong
merged commit 05ffdc9
into
hackclub:mainMar 10, 2025
Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers

@M0HIDM0HIDAwaiting requested review from M0HID

Assignees

@M0HIDM0HID

Labels


None yet


Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

5 participants

@BluePunia@M0HID@Jan-Kur@kapitalnyy@Dongathan-Jong

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Strip utm_, fbclid, gclid, etc. from all links on page\n(function() {\n var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',\n 'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',\n 'ref', 'ref_src', 'source', 'medium', 'campaign'];\n \n function cleanUrl(url) {\n try {\n var u = new URL(url, window.location.origin);\n var changed = false;\n trackingParams.forEach(function(p) {\n if (u.searchParams.has(p)) {\n u.searchParams.delete(p);\n changed = true;\n }\n });\n return changed ? u.toString() : url;\n } catch (e) {\n return url;\n }\n }\n \n function cleanLinks() {\n document.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n \n cleanLinks();\n \n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1) {\n if (node.tagName === 'A') cleanLinks();\n node.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Remove Tracking Parameters from Links");
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content
Add BluePunia's Pad - #546
Merged
Dongathan-Jong merged 10 commits into
hackclub:mainfrom 
BluePunia:main
Mar 10, 2025
Merged
Add BluePunia's Pad#546
Dongathan-Jong merged 10 commits into
hackclub:mainfrom 
BluePunia:main
Conversation
@BluePunia
@BluePuniaBluePunia
commented
Feb 19, 2025

Copy link


Copy Markdown

Contributor
Check off the following to let the reviewers know you've done everything:

[Y] I HAVE RAN DRC ON MY DESIGN WITH ZERO ERRORS (Silkscreen errors are okay)

[Y] I HAVE BRANDED ALL MY PARTS (PCB, CASE) WITH MY HACKPAD'S NAME

[Y] I HAVE MADE SURE MY 3D PRINTED PARTS DO NOT REQUIRE SUPPORTS (Text branding overhang is okay)

[Y] I HAVE MADE SURE TO INCLUDE TOLERANCES (0.25mm)

[Y] MY HACKPAD'S PCB IS UNDER 100mm x 100mm, I DO NOT HAVE MORE THAN 16X SWITCHES, 2X ROTARY ENCODERS, 1X OLED, 16X LEDS.

[Y] IN MY FOLDER, THERE IS A README.MD FILE THAT CONTAINS THE FOLLOWING INFORMATION:
  • Full render including all the parts
  • A few sentences about the inspiration and challenges
  • BOM
  • Photos of the Schematic, PCB, and case
@vercel
vercelBot
commented
Feb 19, 2025•

edited

Loading

Copy link


Copy Markdown

The latest updates on your projects. Learn more about Vercel for Git ↗︎
NameStatusPreviewCommentsUpdated (UTC)
hackpad✅ Ready (Inspect)Visit Preview💬 Add feedbackFeb 25, 2025 0:02am
M0HID
M0HID
previously approved these changes
Feb 24, 2025
View reviewed changes
@M0HIDM0HID
left a comment
•

edited

Loading

Copy link


Copy Markdown

Collaborator
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Awesome work on this!! You can order your Hackpad here!
@M0HID
M0HID
dismissed
their stale reviewFebruary 24, 2025 21:33
no branding on case
M0HID
M0HID
requested changes
Feb 24, 2025
View reviewed changes
@M0HIDM0HID
left a comment


Copy link


Copy Markdown

Collaborator
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Hi! Great work on this so far but it looks like you forgot to put your name on the case/pcb! Could you add that please and then i can approve this!
@M0HIDM0HID
self-assigned this
Feb 24, 2025
@BluePunia
BluePunia
commented
Feb 24, 2025

Copy link


Copy Markdown

ContributorAuthor
Hi! I've put the branding from the bottom on the bottom side of the case. If you go into CAD/how_the_hackpad_should_look.step then look at it from the bottom you'll see it.
obraz_2025-02-24_224955603
@BluePunia
BluePunia
requested a review
from M0HIDFebruary 24, 2025 21:50
@BluePunia
BluePunia
commented
Feb 24, 2025

Copy link


Copy Markdown

ContributorAuthor
I think I've also added my branding on the PCB.
image
image

I'm very sorry if there's something I've done wrong and don't understand it - I'm a newbie in both PCB and CAD designing :ccc
@M0HID
M0HID
commented
Feb 24, 2025

Copy link


Copy Markdown

Collaborator
image

Your PCB is fine, just the inset branding on your case seems to be filled in, so it won't actually print (see image for better explanation) If you could fix that that would be great
@vercel
vercelBot
commented
Feb 24, 2025

Copy link


Copy Markdown

Deployment failed with the following error:
The provided GitHub repository does not contain the requested branch or commit reference. Please ensure the repository is not empty.

@BluePunia
BluePunia
commented
Feb 24, 2025

Copy link


Copy Markdown

ContributorAuthor
I've changed it!

(I've only put the right version of the file in the production/BluePunia's.bottomside v2, didn't put it in the CAD/how_the_hackpad_should_look.step)

Hope it works!
@Jan-Kur
Jan-Kur
commented
Mar 10, 2025

Copy link


Copy Markdown

Contributor
I approve of this submission! Here's my approved hackpad: #549
@kapitalnyy
kapitalnyy
commented
Mar 10, 2025

Copy link


Copy Markdown

Contributor
I approve of this submission, here is my already approved and merged pull request: #552
@Dongathan-Jong
Dongathan-Jong
commented
Mar 10, 2025

Copy link


Copy Markdown

Collaborator
Good stuff! You can order your Hackpad here!
@Dongathan-Jong
Dongathan-Jong
merged commit 05ffdc9
into
hackclub:mainMar 10, 2025
Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers

@M0HIDM0HIDAwaiting requested review from M0HID

Assignees

@M0HIDM0HID

Labels


None yet


Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

5 participants

@BluePunia@M0HID@Jan-Kur@kapitalnyy@Dongathan-Jong

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Auto-enable theater mode on YouTube\n(function() {\n function tryTheater() {\n var btn = document.querySelector('button[aria-label=\"Theater mode\"], ytd-player #player button[title=\"Theater mode\"]');\n if (btn && !btn.classList.contains('activated')) {\n btn.click();\n }\n }\n \n // Try immediately\n tryTheater();\n \n // Try after navigation (SPA)\n var lastUrl = location.href;\n setInterval(function() {\n if (location.href !== lastUrl) {\n lastUrl = location.href;\n setTimeout(tryTheater, 500);\n }\n }, 1000);\n \n // Also try on player load\n var observer = new MutationObserver(tryTheater);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "YouTube Theater Mode Default");
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
Add BluePunia's Pad - #546
Merged
Dongathan-Jong merged 10 commits into
hackclub:mainfrom 
BluePunia:main
Mar 10, 2025
Merged
Add BluePunia's Pad#546
Dongathan-Jong merged 10 commits into
hackclub:mainfrom 
BluePunia:main
Conversation
@BluePunia
@BluePuniaBluePunia
commented
Feb 19, 2025

Copy link


Copy Markdown

Contributor
Check off the following to let the reviewers know you've done everything:

[Y] I HAVE RAN DRC ON MY DESIGN WITH ZERO ERRORS (Silkscreen errors are okay)

[Y] I HAVE BRANDED ALL MY PARTS (PCB, CASE) WITH MY HACKPAD'S NAME

[Y] I HAVE MADE SURE MY 3D PRINTED PARTS DO NOT REQUIRE SUPPORTS (Text branding overhang is okay)

[Y] I HAVE MADE SURE TO INCLUDE TOLERANCES (0.25mm)

[Y] MY HACKPAD'S PCB IS UNDER 100mm x 100mm, I DO NOT HAVE MORE THAN 16X SWITCHES, 2X ROTARY ENCODERS, 1X OLED, 16X LEDS.

[Y] IN MY FOLDER, THERE IS A README.MD FILE THAT CONTAINS THE FOLLOWING INFORMATION:
  • Full render including all the parts
  • A few sentences about the inspiration and challenges
  • BOM
  • Photos of the Schematic, PCB, and case
@vercel
vercelBot
commented
Feb 19, 2025•

edited

Loading

Copy link


Copy Markdown

The latest updates on your projects. Learn more about Vercel for Git ↗︎
NameStatusPreviewCommentsUpdated (UTC)
hackpad✅ Ready (Inspect)Visit Preview💬 Add feedbackFeb 25, 2025 0:02am
M0HID
M0HID
previously approved these changes
Feb 24, 2025
View reviewed changes
@M0HIDM0HID
left a comment
•

edited

Loading

Copy link


Copy Markdown

Collaborator
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Awesome work on this!! You can order your Hackpad here!
@M0HID
M0HID
dismissed
their stale reviewFebruary 24, 2025 21:33
no branding on case
M0HID
M0HID
requested changes
Feb 24, 2025
View reviewed changes
@M0HIDM0HID
left a comment


Copy link


Copy Markdown

Collaborator
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Hi! Great work on this so far but it looks like you forgot to put your name on the case/pcb! Could you add that please and then i can approve this!
@M0HIDM0HID
self-assigned this
Feb 24, 2025
@BluePunia
BluePunia
commented
Feb 24, 2025

Copy link


Copy Markdown

ContributorAuthor
Hi! I've put the branding from the bottom on the bottom side of the case. If you go into CAD/how_the_hackpad_should_look.step then look at it from the bottom you'll see it.
obraz_2025-02-24_224955603
@BluePunia
BluePunia
requested a review
from M0HIDFebruary 24, 2025 21:50
@BluePunia
BluePunia
commented
Feb 24, 2025

Copy link


Copy Markdown

ContributorAuthor
I think I've also added my branding on the PCB.
image
image

I'm very sorry if there's something I've done wrong and don't understand it - I'm a newbie in both PCB and CAD designing :ccc
@M0HID
M0HID
commented
Feb 24, 2025

Copy link


Copy Markdown

Collaborator
image

Your PCB is fine, just the inset branding on your case seems to be filled in, so it won't actually print (see image for better explanation) If you could fix that that would be great
@vercel
vercelBot
commented
Feb 24, 2025

Copy link


Copy Markdown

Deployment failed with the following error:
The provided GitHub repository does not contain the requested branch or commit reference. Please ensure the repository is not empty.

@BluePunia
BluePunia
commented
Feb 24, 2025

Copy link


Copy Markdown

ContributorAuthor
I've changed it!

(I've only put the right version of the file in the production/BluePunia's.bottomside v2, didn't put it in the CAD/how_the_hackpad_should_look.step)

Hope it works!
@Jan-Kur
Jan-Kur
commented
Mar 10, 2025

Copy link


Copy Markdown

Contributor
I approve of this submission! Here's my approved hackpad: #549
@kapitalnyy
kapitalnyy
commented
Mar 10, 2025

Copy link


Copy Markdown

Contributor
I approve of this submission, here is my already approved and merged pull request: #552
@Dongathan-Jong
Dongathan-Jong
commented
Mar 10, 2025

Copy link


Copy Markdown

Collaborator
Good stuff! You can order your Hackpad here!
@Dongathan-Jong
Dongathan-Jong
merged commit 05ffdc9
into
hackclub:mainMar 10, 2025
Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers

@M0HIDM0HIDAwaiting requested review from M0HID

Assignees

@M0HIDM0HID

Labels


None yet


Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

5 participants

@BluePunia@M0HID@Jan-Kur@kapitalnyy@Dongathan-Jong

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Remove or un-stick sticky/fixed headers that block content\n(function() {\n function unstick() {\n document.querySelectorAll('header, nav, [role=\"banner\"], .header, .navbar, .sticky, .fixed-top, [style*=\"position: fixed\"], [style*=\"position:sticky\"]').forEach(function(el) {\n if (el.style.position === 'fixed' || el.style.position === 'sticky' || \n getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {\n el.style.position = 'static';\n el.style.top = 'auto';\n el.style.zIndex = 'auto';\n }\n });\n }\n \n unstick();\n \n var observer = new MutationObserver(unstick);\n observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });\n})();", "Kill Sticky Headers");
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
Add BluePunia's Pad - #546
Merged
Dongathan-Jong merged 10 commits into
hackclub:mainfrom 
BluePunia:main
Mar 10, 2025
Merged
Add BluePunia's Pad#546
Dongathan-Jong merged 10 commits into
hackclub:mainfrom 
BluePunia:main
Conversation
@BluePunia
@BluePuniaBluePunia
commented
Feb 19, 2025

Copy link


Copy Markdown

Contributor
Check off the following to let the reviewers know you've done everything:

[Y] I HAVE RAN DRC ON MY DESIGN WITH ZERO ERRORS (Silkscreen errors are okay)

[Y] I HAVE BRANDED ALL MY PARTS (PCB, CASE) WITH MY HACKPAD'S NAME

[Y] I HAVE MADE SURE MY 3D PRINTED PARTS DO NOT REQUIRE SUPPORTS (Text branding overhang is okay)

[Y] I HAVE MADE SURE TO INCLUDE TOLERANCES (0.25mm)

[Y] MY HACKPAD'S PCB IS UNDER 100mm x 100mm, I DO NOT HAVE MORE THAN 16X SWITCHES, 2X ROTARY ENCODERS, 1X OLED, 16X LEDS.

[Y] IN MY FOLDER, THERE IS A README.MD FILE THAT CONTAINS THE FOLLOWING INFORMATION:
  • Full render including all the parts
  • A few sentences about the inspiration and challenges
  • BOM
  • Photos of the Schematic, PCB, and case
@vercel
vercelBot
commented
Feb 19, 2025•

edited

Loading

Copy link


Copy Markdown

The latest updates on your projects. Learn more about Vercel for Git ↗︎
NameStatusPreviewCommentsUpdated (UTC)
hackpad✅ Ready (Inspect)Visit Preview💬 Add feedbackFeb 25, 2025 0:02am
M0HID
M0HID
previously approved these changes
Feb 24, 2025
View reviewed changes
@M0HIDM0HID
left a comment
•

edited

Loading

Copy link


Copy Markdown

Collaborator
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Awesome work on this!! You can order your Hackpad here!
@M0HID
M0HID
dismissed
their stale reviewFebruary 24, 2025 21:33
no branding on case
M0HID
M0HID
requested changes
Feb 24, 2025
View reviewed changes
@M0HIDM0HID
left a comment


Copy link


Copy Markdown

Collaborator
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Hi! Great work on this so far but it looks like you forgot to put your name on the case/pcb! Could you add that please and then i can approve this!
@M0HIDM0HID
self-assigned this
Feb 24, 2025
@BluePunia
BluePunia
commented
Feb 24, 2025

Copy link


Copy Markdown

ContributorAuthor
Hi! I've put the branding from the bottom on the bottom side of the case. If you go into CAD/how_the_hackpad_should_look.step then look at it from the bottom you'll see it.
obraz_2025-02-24_224955603
@BluePunia
BluePunia
requested a review
from M0HIDFebruary 24, 2025 21:50
@BluePunia
BluePunia
commented
Feb 24, 2025

Copy link


Copy Markdown

ContributorAuthor
I think I've also added my branding on the PCB.
image
image

I'm very sorry if there's something I've done wrong and don't understand it - I'm a newbie in both PCB and CAD designing :ccc
@M0HID
M0HID
commented
Feb 24, 2025

Copy link


Copy Markdown

Collaborator
image

Your PCB is fine, just the inset branding on your case seems to be filled in, so it won't actually print (see image for better explanation) If you could fix that that would be great
@vercel
vercelBot
commented
Feb 24, 2025

Copy link


Copy Markdown

Deployment failed with the following error:
The provided GitHub repository does not contain the requested branch or commit reference. Please ensure the repository is not empty.

@BluePunia
BluePunia
commented
Feb 24, 2025

Copy link


Copy Markdown

ContributorAuthor
I've changed it!

(I've only put the right version of the file in the production/BluePunia's.bottomside v2, didn't put it in the CAD/how_the_hackpad_should_look.step)

Hope it works!
@Jan-Kur
Jan-Kur
commented
Mar 10, 2025

Copy link


Copy Markdown

Contributor
I approve of this submission! Here's my approved hackpad: #549
@kapitalnyy
kapitalnyy
commented
Mar 10, 2025

Copy link


Copy Markdown

Contributor
I approve of this submission, here is my already approved and merged pull request: #552
@Dongathan-Jong
Dongathan-Jong
commented
Mar 10, 2025

Copy link


Copy Markdown

Collaborator
Good stuff! You can order your Hackpad here!
@Dongathan-Jong
Dongathan-Jong
merged commit 05ffdc9
into
hackclub:mainMar 10, 2025
Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers

@M0HIDM0HIDAwaiting requested review from M0HID

Assignees

@M0HIDM0HID

Labels


None yet


Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

5 participants

@BluePunia@M0HID@Jan-Kur@kapitalnyy@Dongathan-Jong

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Universal Dark Mode - works on any site\n(function() {\n var enabled = true;\n \n function applyDarkMode() {\n if (!enabled) return;\n \n // Create style element if it doesn't exist\n var style = document.getElementById('universal-dark-mode-style');\n if (!style) {\n style = document.createElement('style');\n style.id = 'universal-dark-mode-style';\n document.head.appendChild(style);\n }\n \n // Dark mode CSS - inverts colors but preserves images/video\n style.textContent = '\n /* Invert everything except media */\n html {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #1a1a2e !important;\n }\n \n /* Restore images, videos, iframes, canvas */\n img, video, iframe, canvas, svg, picture, [style*=\"background-image\"] {\n filter: invert(1) hue-rotate(180deg) !important;\n }\n \n /* Preserve specific elements that should not be inverted */\n .no-dark-mode, .no-dark-mode *,\n [data-theme=\"light\"], [data-theme=\"light\"],\n .ace_editor, .ace_editor *,\n .CodeMirror, .CodeMirror *,\n .monaco-editor, .monaco-editor *,\n .markdown-body pre, .markdown-body pre *,\n .highlight, .highlight *,\n pre code, pre code * {\n filter: none !important;\n }\n \n /* Fix common UI elements */\n .modal, .popup, .dropdown-menu, .tooltip, .popover {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #2d2d44 !important;\n border-color: #444 !important;\n }\n \n /* Scrollbars */\n ::-webkit-scrollbar { background: #1a1a2e !important; }\n ::-webkit-scrollbar-thumb { background: #444 !important; }\n ::-webkit-scrollbar-thumb:hover { background: #555 !important; }\n \n /* Selection */\n ::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ';\n }\n \n function removeDarkMode() {\n var style = document.getElementById('universal-dark-mode-style');\n if (style) style.remove();\n }\n \n // Toggle with Alt+Shift+D\n document.addEventListener('keydown', function(e) {\n if (e.altKey && e.shiftKey && e.key === 'D') {\n e.preventDefault();\n enabled = !enabled;\n if (enabled) {\n applyDarkMode();\n console.log('[Universal Dark Mode] Enabled');\n } else {\n removeDarkMode();\n console.log('[Universal Dark Mode] Disabled');\n }\n }\n });\n \n // Apply on load\n applyDarkMode();\n \n // Re-apply on dynamic content\n var observer = new MutationObserver(function(mutations) {\n if (enabled && !document.getElementById('universal-dark-mode-style')) {\n applyDarkMode();\n }\n });\n observer.observe(document.head, { childList: true });\n \n console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');\n})();", "Universal Dark Mode");
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content
Add BluePunia's Pad - #546
Merged
Dongathan-Jong merged 10 commits into
hackclub:mainfrom 
BluePunia:main
Mar 10, 2025
Merged
Add BluePunia's Pad#546
Dongathan-Jong merged 10 commits into
hackclub:mainfrom 
BluePunia:main
Conversation
@BluePunia
@BluePuniaBluePunia
commented
Feb 19, 2025

Copy link


Copy Markdown

Contributor
Check off the following to let the reviewers know you've done everything:

[Y] I HAVE RAN DRC ON MY DESIGN WITH ZERO ERRORS (Silkscreen errors are okay)

[Y] I HAVE BRANDED ALL MY PARTS (PCB, CASE) WITH MY HACKPAD'S NAME

[Y] I HAVE MADE SURE MY 3D PRINTED PARTS DO NOT REQUIRE SUPPORTS (Text branding overhang is okay)

[Y] I HAVE MADE SURE TO INCLUDE TOLERANCES (0.25mm)

[Y] MY HACKPAD'S PCB IS UNDER 100mm x 100mm, I DO NOT HAVE MORE THAN 16X SWITCHES, 2X ROTARY ENCODERS, 1X OLED, 16X LEDS.

[Y] IN MY FOLDER, THERE IS A README.MD FILE THAT CONTAINS THE FOLLOWING INFORMATION:
  • Full render including all the parts
  • A few sentences about the inspiration and challenges
  • BOM
  • Photos of the Schematic, PCB, and case
@vercel
vercelBot
commented
Feb 19, 2025•

edited

Loading

Copy link


Copy Markdown

The latest updates on your projects. Learn more about Vercel for Git ↗︎
NameStatusPreviewCommentsUpdated (UTC)
hackpad✅ Ready (Inspect)Visit Preview💬 Add feedbackFeb 25, 2025 0:02am
M0HID
M0HID
previously approved these changes
Feb 24, 2025
View reviewed changes
@M0HIDM0HID
left a comment
•

edited

Loading

Copy link


Copy Markdown

Collaborator
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Awesome work on this!! You can order your Hackpad here!
@M0HID
M0HID
dismissed
their stale reviewFebruary 24, 2025 21:33
no branding on case
M0HID
M0HID
requested changes
Feb 24, 2025
View reviewed changes
@M0HIDM0HID
left a comment


Copy link


Copy Markdown

Collaborator
Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Hi! Great work on this so far but it looks like you forgot to put your name on the case/pcb! Could you add that please and then i can approve this!
@M0HIDM0HID
self-assigned this
Feb 24, 2025
@BluePunia
BluePunia
commented
Feb 24, 2025

Copy link


Copy Markdown

ContributorAuthor
Hi! I've put the branding from the bottom on the bottom side of the case. If you go into CAD/how_the_hackpad_should_look.step then look at it from the bottom you'll see it.
obraz_2025-02-24_224955603
@BluePunia
BluePunia
requested a review
from M0HIDFebruary 24, 2025 21:50
@BluePunia
BluePunia
commented
Feb 24, 2025

Copy link


Copy Markdown

ContributorAuthor
I think I've also added my branding on the PCB.
image
image

I'm very sorry if there's something I've done wrong and don't understand it - I'm a newbie in both PCB and CAD designing :ccc
@M0HID
M0HID
commented
Feb 24, 2025

Copy link


Copy Markdown

Collaborator
image

Your PCB is fine, just the inset branding on your case seems to be filled in, so it won't actually print (see image for better explanation) If you could fix that that would be great
@vercel
vercelBot
commented
Feb 24, 2025

Copy link


Copy Markdown

Deployment failed with the following error:
The provided GitHub repository does not contain the requested branch or commit reference. Please ensure the repository is not empty.

@BluePunia
BluePunia
commented
Feb 24, 2025

Copy link


Copy Markdown

ContributorAuthor
I've changed it!

(I've only put the right version of the file in the production/BluePunia's.bottomside v2, didn't put it in the CAD/how_the_hackpad_should_look.step)

Hope it works!
@Jan-Kur
Jan-Kur
commented
Mar 10, 2025

Copy link


Copy Markdown

Contributor
I approve of this submission! Here's my approved hackpad: #549
@kapitalnyy
kapitalnyy
commented
Mar 10, 2025

Copy link


Copy Markdown

Contributor
I approve of this submission, here is my already approved and merged pull request: #552
@Dongathan-Jong
Dongathan-Jong
commented
Mar 10, 2025

Copy link


Copy Markdown

Collaborator
Good stuff! You can order your Hackpad here!
@Dongathan-Jong
Dongathan-Jong
merged commit 05ffdc9
into
hackclub:mainMar 10, 2025
Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers

@M0HIDM0HIDAwaiting requested review from M0HID

Assignees

@M0HIDM0HID

Labels


None yet


Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

5 participants

@BluePunia@M0HID@Jan-Kur@kapitalnyy@Dongathan-Jong