Added MacroBed

[playlogo]

Ready to submit your project? Nice job! Hopefully you've read the submission guidelines. If not, make sure to read them first.

Check off the following to let the reviewers know you've done everything:

• I HAVE RAN DRC ON MY DESIGN WITH ZERO ERRORS (Silkscreen errors are okay): All within JLCPCB's production capabilities
• I HAVE BRANDED ALL MY PARTS (PCB, CASE) WITH MY HACKPAD'S NAME: Will print myself
• I HAVE MADE SURE MY 3D PRINTED PARTS DO NOT REQUIRE SUPPORTS: Will print myself
• I HAVE MADE SURE TO INCLUDE TOLERANCES (0.25mm)
• MY HACKPAD'S PCB IS UNDER 100mm x 100mm, I DO NOT HAVE MORE THAN 16X SWITCHES, 2X ROTARY ENCODERS, 1X OLED, 16X LEDS.
• IN MY FOLDER, THERE IS A README.MD FILE THAT CONTAINS THE FOLLOWING INFORMATION:
  • Full render including all the parts
  • A few sentences about the inspiration and challenges
  • BOMs
  • Photos of the Schematic, PCB, and case

This Macropad does not use a XIAO RP2040. This is not my first PCB, and for this one i wanted to go with the ESP32S3 for wireless connectivity.

[vercel]

The latest updates on your projects. Learn more about Vercel for Git ↗︎

Name	Status	Preview	Comments	Updated (UTC)
hackpad	✅ Ready (Inspect)	Visit Preview	💬 Add feedback	Feb 20, 2025 8:28pm

[cheyao]

LGTM #4. Just you might need to pay the 6$ out of your own pockets

[Nickdev8]

I approve this submission. My approved PR: 507

[danieliscrazy]

Hey there! Unsure if you plan to print your case yourself or not from reading the README, but if you want your case to be printed for you, you'll need to put branding on both parts of your case.

[playlogo]

Hey there! Unsure if you plan to print your case yourself or not from reading the README, but if you want your case to be printed for you, you'll need to put branding on both parts of your case.

Hi, I'll print it myself. Thank you for the heads up though!

[Taran-the-Idiot]

hihi, can you remove the libraries from your pcb folder? also idt the grant will be able to cover that pcb. its really cool but just pointing that out