Add boo button pad

[Kaympe20]

This is @booboojp's submission as he was unable to properly clone this repo. All files are directly from him.

Check off the following to let the reviewers know you've done everything:

• I HAVE RAN DRC ON MY DESIGN WITH ZERO ERRORS (Silkscreen errors are okay)
• I HAVE BRANDED ALL MY PARTS (PCB, CASE) WITH MY HACKPAD'S NAME
• I HAVE MADE SURE MY 3D PRINTED PARTS DO NOT REQUIRE SUPPORTS (Text branding overhang is okay)
• I HAVE MADE SURE TO INCLUDE TOLERANCES (0.25mm)
• MY HACKPAD'S PCB IS UNDER 100mm x 100mm, I DO NOT HAVE MORE THAN 16X SWITCHES, 2X ROTARY ENCODERS, 1X OLED, 16X LEDS.
• IN MY FOLDER, THERE IS A README.MD FILE THAT CONTAINS THE FOLLOWING INFORMATION:
• Full render including all the parts
• A few sentences about the inspiration and challenges
• BOM
• Photos of the Schematic, PCB, and case

[vercel]

The latest updates on your projects. Learn more about Vercel for Git ↗︎

Name	Status	Preview	Comments	Updated (UTC)
hackpad	✅ Ready (Inspect)	Visit Preview	💬 Add feedback	Feb 25, 2025 4:02am

[arjav0703]

i'd recommend adding an image of the top part of the case

[cheyao]

You currently have too much switches, the max for a macropad is 16x! Sorry! Plus 24 M3x16mm screws doesn't sound right. Also you are missing a plate/top case picture!

#4

[BrentanRath]

@cheyao I can get the picture, but I was told by one of the organizers of this that I was allowed to have more if I payed for it.

[cheyao]

Hm then you are prob fine

[return-misaPuding]

except for the missing picture it LGTM, my approved PR is #634

[Taran-the-Idiot]

@Kaympe20 can you please ask @booboojp to add the files requested and address the points asked by the community reviewers? you can add them as a contributer to the fork so they can make edits

[Kaympe20]

They are banned permanently from HC.

[Taran-the-Idiot]

okay no hackpad for them