Unexpected behavior with multiple notifiers

[bessman]

Describe the bug

When there is more than one active Notifier, only one instance receives an incoming message. Which notifier gets the message seems random.

To Reproduce

# Do this first to set up two virtual can buses with bidirectional gating:
# sudo modprobe vcan
# sudo ip link add dev vcan0 type vcan
# sudo ip link add dev vcan1 type vcan
# sudo ip link set vcan0 up
# sudo ip link set vcan1 up
# sudo modprobe can-gw
# sudo cangw -A -s vcan0 -d vcan1 -e
# sudo cangw -A -s vcan1 -d vcan0 -e

import can

class NamedPrinter(can.Printer):
 def __init__(self, name: str, *args, **kwargs) -> None:
 self.name = name
 super().__init__(*args, **kwargs)

 def on_message_received(self, msg: can.Message) -> None:
 print(f"Printer {self.name}")
 super().on_message_received(msg)

vbus0 = can.Bus(interface="socketcan", channel="vcan0")
vbus1 = can.Bus(interface="socketcan", channel="vcan1")

not1 = can.Notifier(vbus1, [NamedPrinter("A")])
not2 = can.Notifier(vbus1, [NamedPrinter("B")])

msg = can.Message(arbitration_id=0x11, data=b"hello")

for i in range(4):
 vbus0.send(msg)

# Output:
# Printer A
# Timestamp: 1730815787.280445 ID: 00000011 X Rx DL: 5 68 65 6c 6c 6f 'hello' Channel: vcan1
# Printer B
# Timestamp: 1730815787.280519 ID: 00000011 X Rx DL: 5 68 65 6c 6c 6f 'hello' Channel: vcan1
# Printer A
# Timestamp: 1730815787.280466 ID: 00000011 X Rx DL: 5 68 65 6c 6c 6f 'hello' Channel: vcan1
# Printer B
# Timestamp: 1730815787.280531 ID: 00000011 X Rx DL: 5 68 65 6c 6c 6f 'hello' Channel: vcan1

Expected behavior

I expected all notifiers to receive all incoming messages.

If multiple simultaneous notifiers on the same bus is not supported, the documentation should mention this. Ideally, a warning or error should be raised if an additional notifier is created on a bus with an already active notifier.

Additional context

OS and version: Ubuntu 20.04
Python version: 3.13.0
python-can version: 4.4.2
python-can interface/s (if applicable): socketcan

[zariiii9003]

A single notifier can handle multiple bus instances and multiple listeners:

notifier = can.Notifier([vbus1, vbus2], [NamedPrinter("A"), NamedPrinter("B")])

[bessman]

Yes, I know, but I still find this behavior surprising. Wouldn't it make sense to make note of it in the documentation, at least?

On a related note, is there any way to clean up orphaned notifiers? For example:

notifier = can.Notifier(vbus1, [NamedPrinter("A")])
notifier = can.Notifier(vbus1, [NamedPrinter("B")])
notifier.stop()
vbus0.send(msg)
# Output:
# Printer A
# Timestamp: 1730841762.033267 ID: 00000011 X Rx DL: 5 68 65 6c 6c 6f 'hello' Channel: vcan1

[zariiii9003]

Take a look at #1890