PixArt-Sigma Implementation

[lawrence-cj]

What does this PR do?

This PR

1. integrates the PixArtSigmaPipeline
2. moves the use_additional_conditions to the __init__ function of Transformer2DModel
3. makes the one-step sampling(DMD) of PixArtAlphaPipeline possible.
4. adds conversion file to convert pickled PixArt-Sigma checkpoint to the diffusers safetensors file.

After merging, we can directly run with:

>>>importtorch>>>fromdiffusersimportPixArtSigmaPipeline>>># You can replace the checkpoint id with "PixArt-alpha/PixArt-Sigma-XL-2-512-MS" too.>>>pipe=PixArtSigmaPipeline.from_pretrained("PixArt-alpha/PixArt-Sigma-XL-2-1024-MS", torch_dtype=torch.float16)
>>># Enable memory optimizations.>>># pipe.enable_model_cpu_offload()>>>prompt="A small cactus with a happy face in the Sahara desert.">>>image=pipe(prompt).images[0]

Cc: @sayakpaul@yiyixuxu

[sayakpaul]

Help me understand the difference between the PixArt-Alpha and the PixArt-Sigma pipeline implementations? This way, we can decide if we really need to introduce a separate pipeline class here.

[lawrence-cj]

The main difference is PixArt-Sigma doesn't have micro-conditions and PixArt-Sigma's transformer will use the qk_norm and key/value compression later. Therefore, the pipeline needs to accept these two.

[yiyixuxu]

is this the only difference? we can add a if else statement in pixart-alpha pipeline to support this

# 6.1 Prepare micro-conditions.added_cond_kwargs= {"resolution": None, "aspect_ratio": None}
ifself.transformer.config.sample_size==128:
resolution=torch.tensor([height, width]).repeat(batch_size*num_images_per_prompt, 1)
aspect_ratio=torch.tensor([float(height/width)]).repeat(batch_size*num_images_per_prompt, 1)
resolution=resolution.to(dtype=prompt_embeds.dtype, device=device)
aspect_ratio=aspect_ratio.to(dtype=prompt_embeds.dtype, device=device)
ifdo_classifier_free_guidance:
resolution=torch.cat([resolution, resolution], dim=0)
aspect_ratio=torch.cat([aspect_ratio, aspect_ratio], dim=0)
added_cond_kwargs= {"resolution": resolution, "aspect_ratio": aspect_ratio}

[sayakpaul]

PixArt-Sigma will have if self.transformer.config.sample_size == 128: as well but it doesn't use the addition conditions such as resolution and aspect ratio. But it could still be checked with self.transformer.config.use_additional_condition I believe?

[sayakpaul]

@lawrence-cj

PixArt-Sigma's transformer will use the qk_norm and key/value compression later.

This will affect the Transformer block, right and the not pipeline itself. So, I guess that's fine to club it in a single pipeline?

[sayakpaul]

Overall, this is already looking to be in a very good shape. Thank you!

I think once the comments are addressed and we decide if the changes warrant a new pipeline class, we will need to:

• Add a slow test
• Documentation

[HuggingFaceDocBuilderDev]

The docs for this PR live here. All of your documentation changes will be reflected on that endpoint. The docs are available until 30 days after the last update.

[sayakpaul]

I am okay with the PR given:

• The code quality tests pass
• We add documentation
• We add fast tests
• Slow tests can be added later when other Sigma variants (with compressed KV) are in

[Beinsezii]

Is it just me or does the example

pipe=PixArtSigmaPipeline.from_pretrained("PixArt-alpha/PixArt-Sigma-XL-2-1024-MS", torch_dtype=torch.float16)

not work because the huggingface repo only has a transformer folder?

I see convert_pixart_sigma_to_diffusers.py has a workaround for it but the main pipeline does not have any special case for using from_pretrained on a transformer-only repository.

[lawrence-cj]

Let me add the remaining package to the hugging face repo

[yiyixuxu]

@lawrence-cj
why do we need to update alpha tests?
I don't think we changed the model or pipeline in a way that would affect the results

[lawrence-cj]

I don’t know why. Actually I didn’t change anything in alpha. I guess it maybe a historical problem?

[yiyixuxu]

@lawrence-cj can we run the pixart alpha pipeline under this PR to see if the image output generated looks ok?

I will look into the test difference to make sure we did not break anything

[yiyixuxu]

Suggested change

	do_binarize: bool=True,
	do_binarize: bool=False,

[yiyixuxu]

Suggested change

	do_convert_grayscale: bool=True,
	do_convert_grayscale: bool=False,

[yiyixuxu]

@lawrence-cj
i reverted the changes you made to the alpha test and updated the default arg values for PixArt image processor #7654 (comment)

can you run some doc examples for both sigma and alpha, once confirm the outputs are ok and all our tests pass, I will merge

[yiyixuxu]

our hub is experiencing issue so most CI failings are not relevant here (resolved)

[yiyixuxu]

here are my testing script and outputs:

• alpha works as expected
• sigma is currently generating noise (but I; 'm not sure if I ran it correctly, I just used the alpha pipeline and swapped out the transformer)
• not sure if one-step output is expected

# test pixart fromdiffusersimportPixArtAlphaPipeline, PixArtSigmaPipeline, Transformer2DModel, DDPMSchedulerimporttorchimportgcweight_dtype=torch.float16# test 1 step# transformer = Transformer2DModel.from_pretrained("PixArt-alpha/PixArt-Alpha-DMD-XL-2-512x512", subfolder="transformer", torch_dtype=weight_dtype)# scheduler = DDPMScheduler.from_pretrained("PixArt-alpha/PixArt-Alpha-DMD-XL-2-512x512", subfolder="scheduler")# pipe = PixArtAlphaPipeline.from_pretrained(# "PixArt-alpha/PixArt-XL-2-1024-MS",# transformer=transformer,# scheduler=scheduler,# torch_dtype=weight_dtype,# )# pipe.enable_model_cpu_offload()# images = pipe(prompt='dog', timesteps=[400], num_inference_steps=1, output_type="pil",).images[0]# images.save('yiyi_test_4_out_1step.png')# del pipe# torch.cuda.empty_cache()# gc.collect()#test pixart alphapipe=PixArtAlphaPipeline.from_pretrained("PixArt-alpha/PixArt-XL-2-1024-MS", torch_dtype=torch.float16)
pipe.enable_model_cpu_offload()
prompt="A small cactus with a happy face in the Sahara desert."images=pipe(prompt=prompt).images[0]
images.save("yiyi_test_4_out_alpha.png")
pipe.transformer=Nonetorch.cuda.empty_cache()
gc.collect()
# test pixart sigmatransformer=Transformer2DModel.from_pretrained(
"PixArt-alpha/PixArt-Sigma-XL-2-1024-MS",
subfolder="transformer",
torch_dtype=torch.float16,
use_additional_conditions=False,
)
pipe=PixArtSigmaPipeline.from_pipe(pipe, transformer=transformer,torch_dtype=torch.float16)
pipe.enable_model_cpu_offload()
prompt="A small cactus with a happy face in the Sahara desert."image=pipe(prompt).images[0]
image.save("yiyi_test_4_out_sigma.png")

alpha one-step

alpha

sigma

[yiyixuxu]

I'm disabling the sequential offloading test for now because it is not working correctly for transformer models
created an issue about this huggingface/accelerate#2701

[lawrence-cj]

@yiyixuxu For the wrong results of one step generation, we must set the guidance_scale=1 to make it right. Maybe, we can add a warning in the code base?

And here is the correct one.

# test 1 steptransformer=Transformer2DModel.from_pretrained("PixArt-alpha/PixArt-Alpha-DMD-XL-2-512x512", subfolder="transformer", torch_dtype=weight_dtype)
scheduler=DDPMScheduler.from_pretrained("PixArt-alpha/PixArt-Alpha-DMD-XL-2-512x512", subfolder="scheduler")
pipe=PixArtAlphaPipeline.from_pretrained(
"PixArt-alpha/PixArt-XL-2-1024-MS",
transformer=transformer,
scheduler=scheduler,
torch_dtype=weight_dtype,
)
# pipe.enable_model_cpu_offload()pipe.to('cuda')
images=pipe(prompt='dog', timesteps=[400], num_inference_steps=1, guidance_scale=1, output_type="pil",).images[0]
images.save('yiyi_test_4_out_1step.png')
delpipetorch.cuda.empty_cache()
gc.collect()

Generating:

[lawrence-cj]

With your code, the Sigma pipeline does generating pure noises.
But, I use this to get the normal result:

fromdiffusersimportPixArtAlphaPipeline, PixArtSigmaPipeline, Transformer2DModel, DDPMSchedulerimporttorchtransformer=Transformer2DModel.from_pretrained(
"PixArt-alpha/PixArt-Sigma-XL-2-1024-MS",
subfolder="transformer",
torch_dtype=torch.float16,
use_additional_conditions=False,
)
pipe=PixArtSigmaPipeline.from_pretrained("PixArt-alpha/pixart_sigma_sdxlvae_T5_diffusers", transformer=transformer, torch_dtype=torch.float16).to('cuda')
pipe.to('cuda')
# pipe.enable_model_cpu_offload()prompt="A small cactus with a happy face in the Sahara desert."image=pipe(prompt).images[0]
image.save("yiyi_test_4_out_sigma.png")

generating:

[yiyixuxu]

@lawrence-cj ok! If Sigma works correctly, can we update the test for sigma pipeline to make sure it passes?
the image processor was not working correctly before when you made these tests for sigmas, so I think the expected results are currently wrong and need to be updated

[yiyixuxu]

@lawrence-cj

for the wrong results of one step generation, we must set the guidance_scale=1 to make it right. Maybe, we can add a warning in the code base?

I think a doc example to demonstrate current usage is sufficient, no need for a warning I think

[lawrence-cj]

Cool Cool. Let me fix it. Thx!

[yiyixuxu]

merged!
for follow up, can we:

1. add doc pages
2. make sure all the repos can work with from_pretrained ? e.g. these ones currently only have a transformer folder PixArt-alpha/PixArt-Sigma-XL-2-2K-MS

[lawrence-cj]

Congrads!🎉 Thank you so much for your support. @yiyixuxu
Cc: @sayakpaul@badayvedat

add doc pages
make sure all the repos can work with from_pretrained ? e.g. these ones currently only have a transformer folder PixArt-alpha/PixArt-Sigma-XL-2-2K-MS

No problems! I will do all the test for the original and new repos and also add a doc page.

[sayakpaul]

Thanks all.