BranchesTags

Latest commit

History

15 Commits

Folders and files

NameName
Last commit message
Last commit date
Hackheld_Altair_Images
Hackheld_Altair_Images
Hackheld_Altair_PCB
Hackheld_Altair_PCB
.gitignore
.gitignore
CHANGELOG.md
CHANGELOG.md
README.md
README.md

Repository files navigation

Hackheld

A open source hackable handheld for DIY.

Hackheld Altair

Note

This project is still in development and is not yet finished. Please check back later for updates.

NOTE: There is no 3d print case designed for this project yet. If you'd like to contribute, please feel free to!

This is a redesign of SpaceHuhn's Hackheld Vega but with a 5 direction switch and a smaller board.

It can run the ESP8266 Deauther, but you can also write your own firmware using Arduino.

DIY this project

Check out the releases tab!

I highly recommend buying the exact same parts as the section down below as many manufacturers use different 5 directional switches and I've designed the routes according to the one thats listed.

You can use any PCB manufacturing!

Please star this repository if you appreciated my work and would like to help me out!! Thanks in advance.

To flash the esp8266 board, please visit https://github.com/SpacehuhnTech/Hackheld

Parts

Everything is purchased from Aliexpress and have been carefully selected so they are the cheapest avaliable options for most people:

1.3" display(can alternate but ensure the pins are VDD,GND,SCK,SDA): https://www.aliexpress.com/item/4001145494936.html

D1 mini(can alternate but ensure that you are getting one with the correct dimensions): https://www.aliexpress.com/item/32816149164.html

WS2812B 5050 RGB LED: https://www.aliexpress.com/item/1005002653014067.html

6*6 buttons(4 pin): https://www.aliexpress.com/item/33046122537.html

5 direction button(not suitable for alternatives): https://www.aliexpress.com/item/33024133078.html

Simple soldering and wire cutters may be needed to solder on + make sure the parts fit(the pins might be too long).

Credits

Original Hackheld by SpaceHuhn: https://github.com/SpacehuhnTech/HackheldInspiration + original creator(of the firmware too)! Thx Stefan.

DSTike hackheld schematics: https://github.com/lspoplove/Deauther-ProjectUsed schematics to view more detailed wiring

ItsKarilito: https://github.com/ItsKarlito/HackheldRedesigned the PCB and fixed some errors on the original Hackheld

License

This is open source, just like the original hackheld!

About

Hackheld with a joystick, inspired by SpaceHuhns original Hackheld Vega.

Resources

Readme
Activity

Stars

3 stars

Watchers

1 watching

Forks

0 forks
Report repository

Releases

Packages

Contributors

, 'i'); if (__m === '*' || __re.test(location.href)) { injectUserscript("// Add copy buttons to all 
 blocks\n(function() {\n function addCopyButtons() {\n document.querySelectorAll('pre code').forEach(function(codeBlock) {\n if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;\n codeBlock.parentElement.setAttribute('data-copy-added', 'true');\n \n var btn = document.createElement('button');\n btn.textContent = 'Copy';\n btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';\n btn.onmouseover = function() { this.style.opacity = '1'; };\n btn.onmouseout = function() { this.style.opacity = '0.7'; };\n btn.onclick = function() {\n navigator.clipboard.writeText(codeBlock.textContent).then(function() {\n btn.textContent = 'Copied!';\n setTimeout(function() { btn.textContent = 'Copy'; }, 1500);\n });\n };\n codeBlock.parentElement.style.position = 'relative';\n codeBlock.parentElement.appendChild(btn);\n });\n }\n \n addCopyButtons();\n \n // Re-run on dynamic content\n var observer = new MutationObserver(addCopyButtons);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Add Copy Buttons to Code Blocks");
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content
BranchesTags
Latest commit
History
15 Commits
Folders and files
NameName
Last commit message
Last commit date
Hackheld_Altair_Images
Hackheld_Altair_Images
Hackheld_Altair_PCB
Hackheld_Altair_PCB
.gitignore
.gitignore
CHANGELOG.md
CHANGELOG.md
README.md
README.md
Repository files navigation
Hackheld
A open source hackable handheld for DIY.
Hackheld Altair
Note
This project is still in development and is not yet finished. Please check back later for updates.
NOTE: There is no 3d print case designed for this project yet. If you'd like to contribute, please feel free to!
This is a redesign of SpaceHuhn's Hackheld Vega but with a 5 direction switch and a smaller board.
It can run the ESP8266 Deauther, but you can also write your own firmware using Arduino.
DIY this project
Check out the releases tab!
I highly recommend buying the exact same parts as the section down below as many manufacturers use different 5 directional switches and I've designed the routes according to the one thats listed.
You can use any PCB manufacturing!
Please star this repository if you appreciated my work and would like to help me out!! Thanks in advance.
To flash the esp8266 board, please visit https://github.com/SpacehuhnTech/Hackheld
Parts
Everything is purchased from Aliexpress and have been carefully selected so they are the cheapest avaliable options for most people:
1.3" display(can alternate but ensure the pins are VDD,GND,SCK,SDA): https://www.aliexpress.com/item/4001145494936.html
D1 mini(can alternate but ensure that you are getting one with the correct dimensions): https://www.aliexpress.com/item/32816149164.html
WS2812B 5050 RGB LED: https://www.aliexpress.com/item/1005002653014067.html
6*6 buttons(4 pin): https://www.aliexpress.com/item/33046122537.html
5 direction button(not suitable for alternatives): https://www.aliexpress.com/item/33024133078.html
Simple soldering and wire cutters may be needed to solder on + make sure the parts fit(the pins might be too long).
Credits
Original Hackheld by SpaceHuhn: https://github.com/SpacehuhnTech/HackheldInspiration + original creator(of the firmware too)! Thx Stefan.
DSTike hackheld schematics: https://github.com/lspoplove/Deauther-ProjectUsed schematics to view more detailed wiring
ItsKarilito: https://github.com/ItsKarlito/HackheldRedesigned the PCB and fixed some errors on the original Hackheld
License
This is open source, just like the original hackheld!
About
Hackheld with a joystick, inspired by SpaceHuhns original Hackheld Vega. 
Resources
Readme
Activity
Stars
3 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Force GitHub README to respect dark mode\n(function() {\n var style = document.createElement('style');\n style.textContent = '\n .markdown-body {\n color-scheme: dark light;\n }\n .markdown-body pre { background: #161b22 !important; }\n .markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }\n .markdown-body table th, .markdown-body table td { border-color: #30363d !important; }\n .markdown-body img { background: #0d1117; }\n .markdown-body blockquote { border-left-color: #8b949e; }\n .markdown-body hr { border-color: #30363d; }\n ';\n document.head.appendChild(style);\n})();", "GitHub Dark Mode README Fix");
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Latest commit
History
15 Commits
Folders and files
NameName
Last commit message
Last commit date
Hackheld_Altair_Images
Hackheld_Altair_Images
Hackheld_Altair_PCB
Hackheld_Altair_PCB
.gitignore
.gitignore
CHANGELOG.md
CHANGELOG.md
README.md
README.md
Repository files navigation
Hackheld
A open source hackable handheld for DIY.
Hackheld Altair
Note
This project is still in development and is not yet finished. Please check back later for updates.
NOTE: There is no 3d print case designed for this project yet. If you'd like to contribute, please feel free to!
This is a redesign of SpaceHuhn's Hackheld Vega but with a 5 direction switch and a smaller board.
It can run the ESP8266 Deauther, but you can also write your own firmware using Arduino.
DIY this project
Check out the releases tab!
I highly recommend buying the exact same parts as the section down below as many manufacturers use different 5 directional switches and I've designed the routes according to the one thats listed.
You can use any PCB manufacturing!
Please star this repository if you appreciated my work and would like to help me out!! Thanks in advance.
To flash the esp8266 board, please visit https://github.com/SpacehuhnTech/Hackheld
Parts
Everything is purchased from Aliexpress and have been carefully selected so they are the cheapest avaliable options for most people:
1.3" display(can alternate but ensure the pins are VDD,GND,SCK,SDA): https://www.aliexpress.com/item/4001145494936.html
D1 mini(can alternate but ensure that you are getting one with the correct dimensions): https://www.aliexpress.com/item/32816149164.html
WS2812B 5050 RGB LED: https://www.aliexpress.com/item/1005002653014067.html
6*6 buttons(4 pin): https://www.aliexpress.com/item/33046122537.html
5 direction button(not suitable for alternatives): https://www.aliexpress.com/item/33024133078.html
Simple soldering and wire cutters may be needed to solder on + make sure the parts fit(the pins might be too long).
Credits
Original Hackheld by SpaceHuhn: https://github.com/SpacehuhnTech/HackheldInspiration + original creator(of the firmware too)! Thx Stefan.
DSTike hackheld schematics: https://github.com/lspoplove/Deauther-ProjectUsed schematics to view more detailed wiring
ItsKarilito: https://github.com/ItsKarlito/HackheldRedesigned the PCB and fixed some errors on the original Hackheld
License
This is open source, just like the original hackheld!
About
Hackheld with a joystick, inspired by SpaceHuhns original Hackheld Vega. 
Resources
Readme
Activity
Stars
3 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Highlight search terms from Google/DuckDuckGo/Bing referrer\n(function() {\n var ref = document.referrer;\n var terms = [];\n \n if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {\n var url = new URL(ref);\n var q = url.searchParams.get('q') || url.searchParams.get('p');\n if (q) {\n terms = q.split(/\\s+/).filter(function(t) { return t.length > 2; });\n }\n }\n \n if (terms.length === 0) return;\n \n var style = document.createElement('style');\n style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';\n document.head.appendChild(style);\n \n function highlight(node) {\n if (node.nodeType === 3) { // text node\n var text = node.textContent;\n var found = false;\n terms.forEach(function(term) {\n var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\\]\\\\]/g, '\\\\') + ')', 'gi');\n if (regex.test(text)) {\n found = true;\n var frag = document.createDocumentFragment();\n var parts = text.split(regex);\n parts.forEach(function(part, i) {\n if (i % 2 === 0) {\n frag.appendChild(document.createTextNode(part));\n } else {\n var span = document.createElement('span');\n span.className = 'userscript-highlight';\n span.textContent = part;\n frag.appendChild(span);\n }\n });\n node.parentNode.replaceChild(frag, node);\n }\n });\n } else if (node.nodeType === 1 && node.childNodes) { // element\n var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];\n if (!skipTags.includes(node.tagName)) {\n Array.from(node.childNodes).forEach(highlight);\n }\n }\n }\n \n highlight(document.body);\n \n // Re-highlight on dynamic content\n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1 || node.nodeType === 3) highlight(node);\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Highlight Search Terms");
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Latest commit
History
15 Commits
Folders and files
NameName
Last commit message
Last commit date
Hackheld_Altair_Images
Hackheld_Altair_Images
Hackheld_Altair_PCB
Hackheld_Altair_PCB
.gitignore
.gitignore
CHANGELOG.md
CHANGELOG.md
README.md
README.md
Repository files navigation
Hackheld
A open source hackable handheld for DIY.
Hackheld Altair
Note
This project is still in development and is not yet finished. Please check back later for updates.
NOTE: There is no 3d print case designed for this project yet. If you'd like to contribute, please feel free to!
This is a redesign of SpaceHuhn's Hackheld Vega but with a 5 direction switch and a smaller board.
It can run the ESP8266 Deauther, but you can also write your own firmware using Arduino.
DIY this project
Check out the releases tab!
I highly recommend buying the exact same parts as the section down below as many manufacturers use different 5 directional switches and I've designed the routes according to the one thats listed.
You can use any PCB manufacturing!
Please star this repository if you appreciated my work and would like to help me out!! Thanks in advance.
To flash the esp8266 board, please visit https://github.com/SpacehuhnTech/Hackheld
Parts
Everything is purchased from Aliexpress and have been carefully selected so they are the cheapest avaliable options for most people:
1.3" display(can alternate but ensure the pins are VDD,GND,SCK,SDA): https://www.aliexpress.com/item/4001145494936.html
D1 mini(can alternate but ensure that you are getting one with the correct dimensions): https://www.aliexpress.com/item/32816149164.html
WS2812B 5050 RGB LED: https://www.aliexpress.com/item/1005002653014067.html
6*6 buttons(4 pin): https://www.aliexpress.com/item/33046122537.html
5 direction button(not suitable for alternatives): https://www.aliexpress.com/item/33024133078.html
Simple soldering and wire cutters may be needed to solder on + make sure the parts fit(the pins might be too long).
Credits
Original Hackheld by SpaceHuhn: https://github.com/SpacehuhnTech/HackheldInspiration + original creator(of the firmware too)! Thx Stefan.
DSTike hackheld schematics: https://github.com/lspoplove/Deauther-ProjectUsed schematics to view more detailed wiring
ItsKarilito: https://github.com/ItsKarlito/HackheldRedesigned the PCB and fixed some errors on the original Hackheld
License
This is open source, just like the original hackheld!
About
Hackheld with a joystick, inspired by SpaceHuhns original Hackheld Vega. 
Resources
Readme
Activity
Stars
3 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Strip utm_, fbclid, gclid, etc. from all links on page\n(function() {\n var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',\n 'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',\n 'ref', 'ref_src', 'source', 'medium', 'campaign'];\n \n function cleanUrl(url) {\n try {\n var u = new URL(url, window.location.origin);\n var changed = false;\n trackingParams.forEach(function(p) {\n if (u.searchParams.has(p)) {\n u.searchParams.delete(p);\n changed = true;\n }\n });\n return changed ? u.toString() : url;\n } catch (e) {\n return url;\n }\n }\n \n function cleanLinks() {\n document.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n \n cleanLinks();\n \n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1) {\n if (node.tagName === 'A') cleanLinks();\n node.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Remove Tracking Parameters from Links");
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content
BranchesTags
Latest commit
History
15 Commits
Folders and files
NameName
Last commit message
Last commit date
Hackheld_Altair_Images
Hackheld_Altair_Images
Hackheld_Altair_PCB
Hackheld_Altair_PCB
.gitignore
.gitignore
CHANGELOG.md
CHANGELOG.md
README.md
README.md
Repository files navigation
Hackheld
A open source hackable handheld for DIY.
Hackheld Altair
Note
This project is still in development and is not yet finished. Please check back later for updates.
NOTE: There is no 3d print case designed for this project yet. If you'd like to contribute, please feel free to!
This is a redesign of SpaceHuhn's Hackheld Vega but with a 5 direction switch and a smaller board.
It can run the ESP8266 Deauther, but you can also write your own firmware using Arduino.
DIY this project
Check out the releases tab!
I highly recommend buying the exact same parts as the section down below as many manufacturers use different 5 directional switches and I've designed the routes according to the one thats listed.
You can use any PCB manufacturing!
Please star this repository if you appreciated my work and would like to help me out!! Thanks in advance.
To flash the esp8266 board, please visit https://github.com/SpacehuhnTech/Hackheld
Parts
Everything is purchased from Aliexpress and have been carefully selected so they are the cheapest avaliable options for most people:
1.3" display(can alternate but ensure the pins are VDD,GND,SCK,SDA): https://www.aliexpress.com/item/4001145494936.html
D1 mini(can alternate but ensure that you are getting one with the correct dimensions): https://www.aliexpress.com/item/32816149164.html
WS2812B 5050 RGB LED: https://www.aliexpress.com/item/1005002653014067.html
6*6 buttons(4 pin): https://www.aliexpress.com/item/33046122537.html
5 direction button(not suitable for alternatives): https://www.aliexpress.com/item/33024133078.html
Simple soldering and wire cutters may be needed to solder on + make sure the parts fit(the pins might be too long).
Credits
Original Hackheld by SpaceHuhn: https://github.com/SpacehuhnTech/HackheldInspiration + original creator(of the firmware too)! Thx Stefan.
DSTike hackheld schematics: https://github.com/lspoplove/Deauther-ProjectUsed schematics to view more detailed wiring
ItsKarilito: https://github.com/ItsKarlito/HackheldRedesigned the PCB and fixed some errors on the original Hackheld
License
This is open source, just like the original hackheld!
About
Hackheld with a joystick, inspired by SpaceHuhns original Hackheld Vega. 
Resources
Readme
Activity
Stars
3 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Auto-enable theater mode on YouTube\n(function() {\n function tryTheater() {\n var btn = document.querySelector('button[aria-label=\"Theater mode\"], ytd-player #player button[title=\"Theater mode\"]');\n if (btn && !btn.classList.contains('activated')) {\n btn.click();\n }\n }\n \n // Try immediately\n tryTheater();\n \n // Try after navigation (SPA)\n var lastUrl = location.href;\n setInterval(function() {\n if (location.href !== lastUrl) {\n lastUrl = location.href;\n setTimeout(tryTheater, 500);\n }\n }, 1000);\n \n // Also try on player load\n var observer = new MutationObserver(tryTheater);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "YouTube Theater Mode Default");
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Latest commit
History
15 Commits
Folders and files
NameName
Last commit message
Last commit date
Hackheld_Altair_Images
Hackheld_Altair_Images
Hackheld_Altair_PCB
Hackheld_Altair_PCB
.gitignore
.gitignore
CHANGELOG.md
CHANGELOG.md
README.md
README.md
Repository files navigation
Hackheld
A open source hackable handheld for DIY.
Hackheld Altair
Note
This project is still in development and is not yet finished. Please check back later for updates.
NOTE: There is no 3d print case designed for this project yet. If you'd like to contribute, please feel free to!
This is a redesign of SpaceHuhn's Hackheld Vega but with a 5 direction switch and a smaller board.
It can run the ESP8266 Deauther, but you can also write your own firmware using Arduino.
DIY this project
Check out the releases tab!
I highly recommend buying the exact same parts as the section down below as many manufacturers use different 5 directional switches and I've designed the routes according to the one thats listed.
You can use any PCB manufacturing!
Please star this repository if you appreciated my work and would like to help me out!! Thanks in advance.
To flash the esp8266 board, please visit https://github.com/SpacehuhnTech/Hackheld
Parts
Everything is purchased from Aliexpress and have been carefully selected so they are the cheapest avaliable options for most people:
1.3" display(can alternate but ensure the pins are VDD,GND,SCK,SDA): https://www.aliexpress.com/item/4001145494936.html
D1 mini(can alternate but ensure that you are getting one with the correct dimensions): https://www.aliexpress.com/item/32816149164.html
WS2812B 5050 RGB LED: https://www.aliexpress.com/item/1005002653014067.html
6*6 buttons(4 pin): https://www.aliexpress.com/item/33046122537.html
5 direction button(not suitable for alternatives): https://www.aliexpress.com/item/33024133078.html
Simple soldering and wire cutters may be needed to solder on + make sure the parts fit(the pins might be too long).
Credits
Original Hackheld by SpaceHuhn: https://github.com/SpacehuhnTech/HackheldInspiration + original creator(of the firmware too)! Thx Stefan.
DSTike hackheld schematics: https://github.com/lspoplove/Deauther-ProjectUsed schematics to view more detailed wiring
ItsKarilito: https://github.com/ItsKarlito/HackheldRedesigned the PCB and fixed some errors on the original Hackheld
License
This is open source, just like the original hackheld!
About
Hackheld with a joystick, inspired by SpaceHuhns original Hackheld Vega. 
Resources
Readme
Activity
Stars
3 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Remove or un-stick sticky/fixed headers that block content\n(function() {\n function unstick() {\n document.querySelectorAll('header, nav, [role=\"banner\"], .header, .navbar, .sticky, .fixed-top, [style*=\"position: fixed\"], [style*=\"position:sticky\"]').forEach(function(el) {\n if (el.style.position === 'fixed' || el.style.position === 'sticky' || \n getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {\n el.style.position = 'static';\n el.style.top = 'auto';\n el.style.zIndex = 'auto';\n }\n });\n }\n \n unstick();\n \n var observer = new MutationObserver(unstick);\n observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });\n})();", "Kill Sticky Headers");
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Latest commit
History
15 Commits
Folders and files
NameName
Last commit message
Last commit date
Hackheld_Altair_Images
Hackheld_Altair_Images
Hackheld_Altair_PCB
Hackheld_Altair_PCB
.gitignore
.gitignore
CHANGELOG.md
CHANGELOG.md
README.md
README.md
Repository files navigation
Hackheld
A open source hackable handheld for DIY.
Hackheld Altair
Note
This project is still in development and is not yet finished. Please check back later for updates.
NOTE: There is no 3d print case designed for this project yet. If you'd like to contribute, please feel free to!
This is a redesign of SpaceHuhn's Hackheld Vega but with a 5 direction switch and a smaller board.
It can run the ESP8266 Deauther, but you can also write your own firmware using Arduino.
DIY this project
Check out the releases tab!
I highly recommend buying the exact same parts as the section down below as many manufacturers use different 5 directional switches and I've designed the routes according to the one thats listed.
You can use any PCB manufacturing!
Please star this repository if you appreciated my work and would like to help me out!! Thanks in advance.
To flash the esp8266 board, please visit https://github.com/SpacehuhnTech/Hackheld
Parts
Everything is purchased from Aliexpress and have been carefully selected so they are the cheapest avaliable options for most people:
1.3" display(can alternate but ensure the pins are VDD,GND,SCK,SDA): https://www.aliexpress.com/item/4001145494936.html
D1 mini(can alternate but ensure that you are getting one with the correct dimensions): https://www.aliexpress.com/item/32816149164.html
WS2812B 5050 RGB LED: https://www.aliexpress.com/item/1005002653014067.html
6*6 buttons(4 pin): https://www.aliexpress.com/item/33046122537.html
5 direction button(not suitable for alternatives): https://www.aliexpress.com/item/33024133078.html
Simple soldering and wire cutters may be needed to solder on + make sure the parts fit(the pins might be too long).
Credits
Original Hackheld by SpaceHuhn: https://github.com/SpacehuhnTech/HackheldInspiration + original creator(of the firmware too)! Thx Stefan.
DSTike hackheld schematics: https://github.com/lspoplove/Deauther-ProjectUsed schematics to view more detailed wiring
ItsKarilito: https://github.com/ItsKarlito/HackheldRedesigned the PCB and fixed some errors on the original Hackheld
License
This is open source, just like the original hackheld!
About
Hackheld with a joystick, inspired by SpaceHuhns original Hackheld Vega. 
Resources
Readme
Activity
Stars
3 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Universal Dark Mode - works on any site\n(function() {\n var enabled = true;\n \n function applyDarkMode() {\n if (!enabled) return;\n \n // Create style element if it doesn't exist\n var style = document.getElementById('universal-dark-mode-style');\n if (!style) {\n style = document.createElement('style');\n style.id = 'universal-dark-mode-style';\n document.head.appendChild(style);\n }\n \n // Dark mode CSS - inverts colors but preserves images/video\n style.textContent = '\n /* Invert everything except media */\n html {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #1a1a2e !important;\n }\n \n /* Restore images, videos, iframes, canvas */\n img, video, iframe, canvas, svg, picture, [style*=\"background-image\"] {\n filter: invert(1) hue-rotate(180deg) !important;\n }\n \n /* Preserve specific elements that should not be inverted */\n .no-dark-mode, .no-dark-mode *,\n [data-theme=\"light\"], [data-theme=\"light\"],\n .ace_editor, .ace_editor *,\n .CodeMirror, .CodeMirror *,\n .monaco-editor, .monaco-editor *,\n .markdown-body pre, .markdown-body pre *,\n .highlight, .highlight *,\n pre code, pre code * {\n filter: none !important;\n }\n \n /* Fix common UI elements */\n .modal, .popup, .dropdown-menu, .tooltip, .popover {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #2d2d44 !important;\n border-color: #444 !important;\n }\n \n /* Scrollbars */\n ::-webkit-scrollbar { background: #1a1a2e !important; }\n ::-webkit-scrollbar-thumb { background: #444 !important; }\n ::-webkit-scrollbar-thumb:hover { background: #555 !important; }\n \n /* Selection */\n ::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ';\n }\n \n function removeDarkMode() {\n var style = document.getElementById('universal-dark-mode-style');\n if (style) style.remove();\n }\n \n // Toggle with Alt+Shift+D\n document.addEventListener('keydown', function(e) {\n if (e.altKey && e.shiftKey && e.key === 'D') {\n e.preventDefault();\n enabled = !enabled;\n if (enabled) {\n applyDarkMode();\n console.log('[Universal Dark Mode] Enabled');\n } else {\n removeDarkMode();\n console.log('[Universal Dark Mode] Disabled');\n }\n }\n });\n \n // Apply on load\n applyDarkMode();\n \n // Re-apply on dynamic content\n var observer = new MutationObserver(function(mutations) {\n if (enabled && !document.getElementById('universal-dark-mode-style')) {\n applyDarkMode();\n }\n });\n observer.observe(document.head, { childList: true });\n \n console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');\n})();", "Universal Dark Mode");
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content
BranchesTags
Latest commit
History
15 Commits
Folders and files
NameName
Last commit message
Last commit date
Hackheld_Altair_Images
Hackheld_Altair_Images
Hackheld_Altair_PCB
Hackheld_Altair_PCB
.gitignore
.gitignore
CHANGELOG.md
CHANGELOG.md
README.md
README.md
Repository files navigation
Hackheld
A open source hackable handheld for DIY.
Hackheld Altair
Note
This project is still in development and is not yet finished. Please check back later for updates.
NOTE: There is no 3d print case designed for this project yet. If you'd like to contribute, please feel free to!
This is a redesign of SpaceHuhn's Hackheld Vega but with a 5 direction switch and a smaller board.
It can run the ESP8266 Deauther, but you can also write your own firmware using Arduino.
DIY this project
Check out the releases tab!
I highly recommend buying the exact same parts as the section down below as many manufacturers use different 5 directional switches and I've designed the routes according to the one thats listed.
You can use any PCB manufacturing!
Please star this repository if you appreciated my work and would like to help me out!! Thanks in advance.
To flash the esp8266 board, please visit https://github.com/SpacehuhnTech/Hackheld
Parts
Everything is purchased from Aliexpress and have been carefully selected so they are the cheapest avaliable options for most people:
1.3" display(can alternate but ensure the pins are VDD,GND,SCK,SDA): https://www.aliexpress.com/item/4001145494936.html
D1 mini(can alternate but ensure that you are getting one with the correct dimensions): https://www.aliexpress.com/item/32816149164.html
WS2812B 5050 RGB LED: https://www.aliexpress.com/item/1005002653014067.html
6*6 buttons(4 pin): https://www.aliexpress.com/item/33046122537.html
5 direction button(not suitable for alternatives): https://www.aliexpress.com/item/33024133078.html
Simple soldering and wire cutters may be needed to solder on + make sure the parts fit(the pins might be too long).
Credits
Original Hackheld by SpaceHuhn: https://github.com/SpacehuhnTech/HackheldInspiration + original creator(of the firmware too)! Thx Stefan.
DSTike hackheld schematics: https://github.com/lspoplove/Deauther-ProjectUsed schematics to view more detailed wiring
ItsKarilito: https://github.com/ItsKarlito/HackheldRedesigned the PCB and fixed some errors on the original Hackheld
License
This is open source, just like the original hackheld!
About
Hackheld with a joystick, inspired by SpaceHuhns original Hackheld Vega. 
Resources
Readme
Activity
Stars
3 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors