BranchesTags

Latest commit

History

81 Commits

Folders and files

NameName
Last commit message
Last commit date
config
config
doc
doc
lib
lib
src/EventRecorder
src/EventRecorder
BUILDING.md
BUILDING.md
LICENSE
LICENSE
README.md
README.md
prebuild.xml
prebuild.xml

Repository files navigation

#EventRecordingModule#

##Introduction##

This module can record various user related events that take place on a simulator for later analysis.

Events that can currently be recorded are

  1. User login.
  2. User logout.
  3. User entrance to a specific region.
  4. User chat.
  5. User to user instant messages.
  6. User to group instant messages.

##Requirements##

Like OpenSimulator 0.8 onwards, this module requires the .net 4.0 SDK. With Mono, this means that you need a version higher than 2.8 to run it.

##Building##

  1. Copy the support libraries in lib/*.dll to $OPENSIM_BASE/bin. These are referenced in the build process.

  2. For the rest, follow the standard instructions for building modules from source [MODULE BUILDING].

##Installation##

The build process will copy the EventRecorder.dll file to $OPENSIM_BASE/bin automatically on each build. However, you will also need to perform the following steps.

  1. If you are using a prebuilt-binary and so have not done this in the building step, copy the support libraries in lib/*.dll to $OPENSIM_BASE/bin.

  2. Copy the [EventRecorder] section of config/EventRecorder.ini to OpenSim.ini OR copy the config/EventRecorder.ini to $OPENSIM_BASE/bin/addon-modules/EventRecordingModule/config/EventRecorder.ini

  3. Edit the [EventRecorder] section as required. If you use the MySQL recorder, then you will also need to create the database that you specify in the ConnectionString. You will always need to set a GridId in this section.

##Console Commands##

  • evr info - This will print out current information about the event recorder (e.g. number of events queued for writing.

Web Interface

Analyzing the generated data can be done in a number of ways. Some very basic examples are given at [WEB INTERFACE].

##Limitations##

Because this module works at the simulator level, on a multi-simulator installation of OpenSimulator it needs to be enabled on every simulator if you want to be sure to capture all user login, logout and region entrance events.

##Issues##

  • At the moment, this module will not work properly if the number of regions on a simulator drops to zero without the simulator being shutdown (this is possible if one dynamically removes regions). It will be possible to handle this case when the next version of OpenSimulator is released

##Repository##

This module is hosted at [EVENT RECORDER]. Please report any issues with the bug tracker there.

##Credits##

##Third Party Libraries##

##References##

[EVENT RECORDER] - https://github.com/justincc/EventRecordingModule

[MODULE BUILDING] - http://opensimulator.org/wiki/IRegionModule#From_existing_module_code

[WEB INTERFACE] - https://github.com/justincc/EventRecorderWebInterface

vim: ts=4:sw=4:et:tw=120

About

This module will record various events that take place on a simulator (e.g. avatar entering a region) to some other data source for later analysis. Currently under initial development.

Resources

Readme
BSD-3-Clause license
Activity

Stars

1 star

Watchers

2 watching

Forks

5 forks
Report repository

Releases

Packages

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { injectUserscript("// Add copy buttons to all 
 blocks\n(function() {\n function addCopyButtons() {\n document.querySelectorAll('pre code').forEach(function(codeBlock) {\n if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;\n codeBlock.parentElement.setAttribute('data-copy-added', 'true');\n \n var btn = document.createElement('button');\n btn.textContent = 'Copy';\n btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';\n btn.onmouseover = function() { this.style.opacity = '1'; };\n btn.onmouseout = function() { this.style.opacity = '0.7'; };\n btn.onclick = function() {\n navigator.clipboard.writeText(codeBlock.textContent).then(function() {\n btn.textContent = 'Copied!';\n setTimeout(function() { btn.textContent = 'Copy'; }, 1500);\n });\n };\n codeBlock.parentElement.style.position = 'relative';\n codeBlock.parentElement.appendChild(btn);\n });\n }\n \n addCopyButtons();\n \n // Re-run on dynamic content\n var observer = new MutationObserver(addCopyButtons);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Add Copy Buttons to Code Blocks");
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content
BranchesTags
Latest commit
History
81 Commits
Folders and files
NameName
Last commit message
Last commit date
config
config
doc
doc
lib
lib
src/EventRecorder
src/EventRecorder
BUILDING.md
BUILDING.md
LICENSE
LICENSE
README.md
README.md
prebuild.xml
prebuild.xml
Repository files navigation
#EventRecordingModule#
##Introduction##
This module can record various user related events that take place on a simulator for later analysis.
Events that can currently be recorded are
  1. User login.
  2. User logout.
  3. User entrance to a specific region.
  4. User chat.
  5. User to user instant messages.
  6. User to group instant messages.
##Requirements##
Like OpenSimulator 0.8 onwards, this module requires the .net 4.0 SDK. With Mono, this means that you need a version
higher than 2.8 to run it.
##Building##
  1. Copy the support libraries in lib/*.dll to $OPENSIM_BASE/bin. These are referenced in the build process.
  2. For the rest, follow the standard instructions for building modules from source [MODULE BUILDING].
##Installation##
The build process will copy the EventRecorder.dll file to $OPENSIM_BASE/bin automatically on each build. However, you
will also need to perform the following steps.
  1. If you are using a prebuilt-binary and so have not done this in the building step, copy the support libraries in
lib/*.dll to $OPENSIM_BASE/bin.
  2. Copy the [EventRecorder] section of config/EventRecorder.ini to OpenSim.ini OR copy the config/EventRecorder.ini to
$OPENSIM_BASE/bin/addon-modules/EventRecordingModule/config/EventRecorder.ini
  3. Edit the [EventRecorder] section as required. If you use the MySQL recorder, then you will also need to create the
database that you specify in the ConnectionString. You will always need to set a GridId in this section.
##Console Commands##
  • evr info - This will print out current information about the event recorder (e.g. number of events queued for writing.
Web Interface
Analyzing the generated data can be done in a number of ways. Some very basic examples are given at [WEB INTERFACE].
##Limitations##
Because this module works at the simulator level, on a multi-simulator installation of OpenSimulator it needs to be
enabled on every simulator if you want to be sure to capture all user login, logout and region entrance events.
##Issues##
  • At the moment, this module will not work properly if the number of regions on a simulator drops to zero without
the simulator being shutdown (this is possible if one dynamically removes regions). It will be possible to handle this
case when the next version of OpenSimulator is released
##Repository##
This module is hosted at [EVENT RECORDER]. Please report any issues with the bug tracker there.
##Credits##
##Third Party Libraries##
##References##
[EVENT RECORDER] - https://github.com/justincc/EventRecordingModule
[MODULE BUILDING] - http://opensimulator.org/wiki/IRegionModule#From_existing_module_code
[WEB INTERFACE] - https://github.com/justincc/EventRecorderWebInterface
vim: ts=4:sw=4:et:tw=120
About
This module will record various events that take place on a simulator (e.g. avatar entering a region) to some other data source for later analysis. Currently under initial development.
Resources
Readme
BSD-3-Clause license
Activity
Stars
1 star
Watchers
2 watching
Forks
5 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Force GitHub README to respect dark mode\n(function() {\n var style = document.createElement('style');\n style.textContent = '\n .markdown-body {\n color-scheme: dark light;\n }\n .markdown-body pre { background: #161b22 !important; }\n .markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }\n .markdown-body table th, .markdown-body table td { border-color: #30363d !important; }\n .markdown-body img { background: #0d1117; }\n .markdown-body blockquote { border-left-color: #8b949e; }\n .markdown-body hr { border-color: #30363d; }\n ';\n document.head.appendChild(style);\n})();", "GitHub Dark Mode README Fix");
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Latest commit
History
81 Commits
Folders and files
NameName
Last commit message
Last commit date
config
config
doc
doc
lib
lib
src/EventRecorder
src/EventRecorder
BUILDING.md
BUILDING.md
LICENSE
LICENSE
README.md
README.md
prebuild.xml
prebuild.xml
Repository files navigation
#EventRecordingModule#
##Introduction##
This module can record various user related events that take place on a simulator for later analysis.
Events that can currently be recorded are
  1. User login.
  2. User logout.
  3. User entrance to a specific region.
  4. User chat.
  5. User to user instant messages.
  6. User to group instant messages.
##Requirements##
Like OpenSimulator 0.8 onwards, this module requires the .net 4.0 SDK. With Mono, this means that you need a version
higher than 2.8 to run it.
##Building##
  1. Copy the support libraries in lib/*.dll to $OPENSIM_BASE/bin. These are referenced in the build process.
  2. For the rest, follow the standard instructions for building modules from source [MODULE BUILDING].
##Installation##
The build process will copy the EventRecorder.dll file to $OPENSIM_BASE/bin automatically on each build. However, you
will also need to perform the following steps.
  1. If you are using a prebuilt-binary and so have not done this in the building step, copy the support libraries in
lib/*.dll to $OPENSIM_BASE/bin.
  2. Copy the [EventRecorder] section of config/EventRecorder.ini to OpenSim.ini OR copy the config/EventRecorder.ini to
$OPENSIM_BASE/bin/addon-modules/EventRecordingModule/config/EventRecorder.ini
  3. Edit the [EventRecorder] section as required. If you use the MySQL recorder, then you will also need to create the
database that you specify in the ConnectionString. You will always need to set a GridId in this section.
##Console Commands##
  • evr info - This will print out current information about the event recorder (e.g. number of events queued for writing.
Web Interface
Analyzing the generated data can be done in a number of ways. Some very basic examples are given at [WEB INTERFACE].
##Limitations##
Because this module works at the simulator level, on a multi-simulator installation of OpenSimulator it needs to be
enabled on every simulator if you want to be sure to capture all user login, logout and region entrance events.
##Issues##
  • At the moment, this module will not work properly if the number of regions on a simulator drops to zero without
the simulator being shutdown (this is possible if one dynamically removes regions). It will be possible to handle this
case when the next version of OpenSimulator is released
##Repository##
This module is hosted at [EVENT RECORDER]. Please report any issues with the bug tracker there.
##Credits##
##Third Party Libraries##
##References##
[EVENT RECORDER] - https://github.com/justincc/EventRecordingModule
[MODULE BUILDING] - http://opensimulator.org/wiki/IRegionModule#From_existing_module_code
[WEB INTERFACE] - https://github.com/justincc/EventRecorderWebInterface
vim: ts=4:sw=4:et:tw=120
About
This module will record various events that take place on a simulator (e.g. avatar entering a region) to some other data source for later analysis. Currently under initial development.
Resources
Readme
BSD-3-Clause license
Activity
Stars
1 star
Watchers
2 watching
Forks
5 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Highlight search terms from Google/DuckDuckGo/Bing referrer\n(function() {\n var ref = document.referrer;\n var terms = [];\n \n if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {\n var url = new URL(ref);\n var q = url.searchParams.get('q') || url.searchParams.get('p');\n if (q) {\n terms = q.split(/\\s+/).filter(function(t) { return t.length > 2; });\n }\n }\n \n if (terms.length === 0) return;\n \n var style = document.createElement('style');\n style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';\n document.head.appendChild(style);\n \n function highlight(node) {\n if (node.nodeType === 3) { // text node\n var text = node.textContent;\n var found = false;\n terms.forEach(function(term) {\n var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\\]\\\\]/g, '\\\\') + ')', 'gi');\n if (regex.test(text)) {\n found = true;\n var frag = document.createDocumentFragment();\n var parts = text.split(regex);\n parts.forEach(function(part, i) {\n if (i % 2 === 0) {\n frag.appendChild(document.createTextNode(part));\n } else {\n var span = document.createElement('span');\n span.className = 'userscript-highlight';\n span.textContent = part;\n frag.appendChild(span);\n }\n });\n node.parentNode.replaceChild(frag, node);\n }\n });\n } else if (node.nodeType === 1 && node.childNodes) { // element\n var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];\n if (!skipTags.includes(node.tagName)) {\n Array.from(node.childNodes).forEach(highlight);\n }\n }\n }\n \n highlight(document.body);\n \n // Re-highlight on dynamic content\n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1 || node.nodeType === 3) highlight(node);\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Highlight Search Terms");
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Latest commit
History
81 Commits
Folders and files
NameName
Last commit message
Last commit date
config
config
doc
doc
lib
lib
src/EventRecorder
src/EventRecorder
BUILDING.md
BUILDING.md
LICENSE
LICENSE
README.md
README.md
prebuild.xml
prebuild.xml
Repository files navigation
#EventRecordingModule#
##Introduction##
This module can record various user related events that take place on a simulator for later analysis.
Events that can currently be recorded are
  1. User login.
  2. User logout.
  3. User entrance to a specific region.
  4. User chat.
  5. User to user instant messages.
  6. User to group instant messages.
##Requirements##
Like OpenSimulator 0.8 onwards, this module requires the .net 4.0 SDK. With Mono, this means that you need a version
higher than 2.8 to run it.
##Building##
  1. Copy the support libraries in lib/*.dll to $OPENSIM_BASE/bin. These are referenced in the build process.
  2. For the rest, follow the standard instructions for building modules from source [MODULE BUILDING].
##Installation##
The build process will copy the EventRecorder.dll file to $OPENSIM_BASE/bin automatically on each build. However, you
will also need to perform the following steps.
  1. If you are using a prebuilt-binary and so have not done this in the building step, copy the support libraries in
lib/*.dll to $OPENSIM_BASE/bin.
  2. Copy the [EventRecorder] section of config/EventRecorder.ini to OpenSim.ini OR copy the config/EventRecorder.ini to
$OPENSIM_BASE/bin/addon-modules/EventRecordingModule/config/EventRecorder.ini
  3. Edit the [EventRecorder] section as required. If you use the MySQL recorder, then you will also need to create the
database that you specify in the ConnectionString. You will always need to set a GridId in this section.
##Console Commands##
  • evr info - This will print out current information about the event recorder (e.g. number of events queued for writing.
Web Interface
Analyzing the generated data can be done in a number of ways. Some very basic examples are given at [WEB INTERFACE].
##Limitations##
Because this module works at the simulator level, on a multi-simulator installation of OpenSimulator it needs to be
enabled on every simulator if you want to be sure to capture all user login, logout and region entrance events.
##Issues##
  • At the moment, this module will not work properly if the number of regions on a simulator drops to zero without
the simulator being shutdown (this is possible if one dynamically removes regions). It will be possible to handle this
case when the next version of OpenSimulator is released
##Repository##
This module is hosted at [EVENT RECORDER]. Please report any issues with the bug tracker there.
##Credits##
##Third Party Libraries##
##References##
[EVENT RECORDER] - https://github.com/justincc/EventRecordingModule
[MODULE BUILDING] - http://opensimulator.org/wiki/IRegionModule#From_existing_module_code
[WEB INTERFACE] - https://github.com/justincc/EventRecorderWebInterface
vim: ts=4:sw=4:et:tw=120
About
This module will record various events that take place on a simulator (e.g. avatar entering a region) to some other data source for later analysis. Currently under initial development.
Resources
Readme
BSD-3-Clause license
Activity
Stars
1 star
Watchers
2 watching
Forks
5 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Strip utm_, fbclid, gclid, etc. from all links on page\n(function() {\n var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',\n 'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',\n 'ref', 'ref_src', 'source', 'medium', 'campaign'];\n \n function cleanUrl(url) {\n try {\n var u = new URL(url, window.location.origin);\n var changed = false;\n trackingParams.forEach(function(p) {\n if (u.searchParams.has(p)) {\n u.searchParams.delete(p);\n changed = true;\n }\n });\n return changed ? u.toString() : url;\n } catch (e) {\n return url;\n }\n }\n \n function cleanLinks() {\n document.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n \n cleanLinks();\n \n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1) {\n if (node.tagName === 'A') cleanLinks();\n node.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Remove Tracking Parameters from Links");
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content
BranchesTags
Latest commit
History
81 Commits
Folders and files
NameName
Last commit message
Last commit date
config
config
doc
doc
lib
lib
src/EventRecorder
src/EventRecorder
BUILDING.md
BUILDING.md
LICENSE
LICENSE
README.md
README.md
prebuild.xml
prebuild.xml
Repository files navigation
#EventRecordingModule#
##Introduction##
This module can record various user related events that take place on a simulator for later analysis.
Events that can currently be recorded are
  1. User login.
  2. User logout.
  3. User entrance to a specific region.
  4. User chat.
  5. User to user instant messages.
  6. User to group instant messages.
##Requirements##
Like OpenSimulator 0.8 onwards, this module requires the .net 4.0 SDK. With Mono, this means that you need a version
higher than 2.8 to run it.
##Building##
  1. Copy the support libraries in lib/*.dll to $OPENSIM_BASE/bin. These are referenced in the build process.
  2. For the rest, follow the standard instructions for building modules from source [MODULE BUILDING].
##Installation##
The build process will copy the EventRecorder.dll file to $OPENSIM_BASE/bin automatically on each build. However, you
will also need to perform the following steps.
  1. If you are using a prebuilt-binary and so have not done this in the building step, copy the support libraries in
lib/*.dll to $OPENSIM_BASE/bin.
  2. Copy the [EventRecorder] section of config/EventRecorder.ini to OpenSim.ini OR copy the config/EventRecorder.ini to
$OPENSIM_BASE/bin/addon-modules/EventRecordingModule/config/EventRecorder.ini
  3. Edit the [EventRecorder] section as required. If you use the MySQL recorder, then you will also need to create the
database that you specify in the ConnectionString. You will always need to set a GridId in this section.
##Console Commands##
  • evr info - This will print out current information about the event recorder (e.g. number of events queued for writing.
Web Interface
Analyzing the generated data can be done in a number of ways. Some very basic examples are given at [WEB INTERFACE].
##Limitations##
Because this module works at the simulator level, on a multi-simulator installation of OpenSimulator it needs to be
enabled on every simulator if you want to be sure to capture all user login, logout and region entrance events.
##Issues##
  • At the moment, this module will not work properly if the number of regions on a simulator drops to zero without
the simulator being shutdown (this is possible if one dynamically removes regions). It will be possible to handle this
case when the next version of OpenSimulator is released
##Repository##
This module is hosted at [EVENT RECORDER]. Please report any issues with the bug tracker there.
##Credits##
##Third Party Libraries##
##References##
[EVENT RECORDER] - https://github.com/justincc/EventRecordingModule
[MODULE BUILDING] - http://opensimulator.org/wiki/IRegionModule#From_existing_module_code
[WEB INTERFACE] - https://github.com/justincc/EventRecorderWebInterface
vim: ts=4:sw=4:et:tw=120
About
This module will record various events that take place on a simulator (e.g. avatar entering a region) to some other data source for later analysis. Currently under initial development.
Resources
Readme
BSD-3-Clause license
Activity
Stars
1 star
Watchers
2 watching
Forks
5 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Auto-enable theater mode on YouTube\n(function() {\n function tryTheater() {\n var btn = document.querySelector('button[aria-label=\"Theater mode\"], ytd-player #player button[title=\"Theater mode\"]');\n if (btn && !btn.classList.contains('activated')) {\n btn.click();\n }\n }\n \n // Try immediately\n tryTheater();\n \n // Try after navigation (SPA)\n var lastUrl = location.href;\n setInterval(function() {\n if (location.href !== lastUrl) {\n lastUrl = location.href;\n setTimeout(tryTheater, 500);\n }\n }, 1000);\n \n // Also try on player load\n var observer = new MutationObserver(tryTheater);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "YouTube Theater Mode Default");
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Latest commit
History
81 Commits
Folders and files
NameName
Last commit message
Last commit date
config
config
doc
doc
lib
lib
src/EventRecorder
src/EventRecorder
BUILDING.md
BUILDING.md
LICENSE
LICENSE
README.md
README.md
prebuild.xml
prebuild.xml
Repository files navigation
#EventRecordingModule#
##Introduction##
This module can record various user related events that take place on a simulator for later analysis.
Events that can currently be recorded are
  1. User login.
  2. User logout.
  3. User entrance to a specific region.
  4. User chat.
  5. User to user instant messages.
  6. User to group instant messages.
##Requirements##
Like OpenSimulator 0.8 onwards, this module requires the .net 4.0 SDK. With Mono, this means that you need a version
higher than 2.8 to run it.
##Building##
  1. Copy the support libraries in lib/*.dll to $OPENSIM_BASE/bin. These are referenced in the build process.
  2. For the rest, follow the standard instructions for building modules from source [MODULE BUILDING].
##Installation##
The build process will copy the EventRecorder.dll file to $OPENSIM_BASE/bin automatically on each build. However, you
will also need to perform the following steps.
  1. If you are using a prebuilt-binary and so have not done this in the building step, copy the support libraries in
lib/*.dll to $OPENSIM_BASE/bin.
  2. Copy the [EventRecorder] section of config/EventRecorder.ini to OpenSim.ini OR copy the config/EventRecorder.ini to
$OPENSIM_BASE/bin/addon-modules/EventRecordingModule/config/EventRecorder.ini
  3. Edit the [EventRecorder] section as required. If you use the MySQL recorder, then you will also need to create the
database that you specify in the ConnectionString. You will always need to set a GridId in this section.
##Console Commands##
  • evr info - This will print out current information about the event recorder (e.g. number of events queued for writing.
Web Interface
Analyzing the generated data can be done in a number of ways. Some very basic examples are given at [WEB INTERFACE].
##Limitations##
Because this module works at the simulator level, on a multi-simulator installation of OpenSimulator it needs to be
enabled on every simulator if you want to be sure to capture all user login, logout and region entrance events.
##Issues##
  • At the moment, this module will not work properly if the number of regions on a simulator drops to zero without
the simulator being shutdown (this is possible if one dynamically removes regions). It will be possible to handle this
case when the next version of OpenSimulator is released
##Repository##
This module is hosted at [EVENT RECORDER]. Please report any issues with the bug tracker there.
##Credits##
##Third Party Libraries##
##References##
[EVENT RECORDER] - https://github.com/justincc/EventRecordingModule
[MODULE BUILDING] - http://opensimulator.org/wiki/IRegionModule#From_existing_module_code
[WEB INTERFACE] - https://github.com/justincc/EventRecorderWebInterface
vim: ts=4:sw=4:et:tw=120
About
This module will record various events that take place on a simulator (e.g. avatar entering a region) to some other data source for later analysis. Currently under initial development.
Resources
Readme
BSD-3-Clause license
Activity
Stars
1 star
Watchers
2 watching
Forks
5 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Remove or un-stick sticky/fixed headers that block content\n(function() {\n function unstick() {\n document.querySelectorAll('header, nav, [role=\"banner\"], .header, .navbar, .sticky, .fixed-top, [style*=\"position: fixed\"], [style*=\"position:sticky\"]').forEach(function(el) {\n if (el.style.position === 'fixed' || el.style.position === 'sticky' || \n getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {\n el.style.position = 'static';\n el.style.top = 'auto';\n el.style.zIndex = 'auto';\n }\n });\n }\n \n unstick();\n \n var observer = new MutationObserver(unstick);\n observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });\n})();", "Kill Sticky Headers");
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Latest commit
History
81 Commits
Folders and files
NameName
Last commit message
Last commit date
config
config
doc
doc
lib
lib
src/EventRecorder
src/EventRecorder
BUILDING.md
BUILDING.md
LICENSE
LICENSE
README.md
README.md
prebuild.xml
prebuild.xml
Repository files navigation
#EventRecordingModule#
##Introduction##
This module can record various user related events that take place on a simulator for later analysis.
Events that can currently be recorded are
  1. User login.
  2. User logout.
  3. User entrance to a specific region.
  4. User chat.
  5. User to user instant messages.
  6. User to group instant messages.
##Requirements##
Like OpenSimulator 0.8 onwards, this module requires the .net 4.0 SDK. With Mono, this means that you need a version
higher than 2.8 to run it.
##Building##
  1. Copy the support libraries in lib/*.dll to $OPENSIM_BASE/bin. These are referenced in the build process.
  2. For the rest, follow the standard instructions for building modules from source [MODULE BUILDING].
##Installation##
The build process will copy the EventRecorder.dll file to $OPENSIM_BASE/bin automatically on each build. However, you
will also need to perform the following steps.
  1. If you are using a prebuilt-binary and so have not done this in the building step, copy the support libraries in
lib/*.dll to $OPENSIM_BASE/bin.
  2. Copy the [EventRecorder] section of config/EventRecorder.ini to OpenSim.ini OR copy the config/EventRecorder.ini to
$OPENSIM_BASE/bin/addon-modules/EventRecordingModule/config/EventRecorder.ini
  3. Edit the [EventRecorder] section as required. If you use the MySQL recorder, then you will also need to create the
database that you specify in the ConnectionString. You will always need to set a GridId in this section.
##Console Commands##
  • evr info - This will print out current information about the event recorder (e.g. number of events queued for writing.
Web Interface
Analyzing the generated data can be done in a number of ways. Some very basic examples are given at [WEB INTERFACE].
##Limitations##
Because this module works at the simulator level, on a multi-simulator installation of OpenSimulator it needs to be
enabled on every simulator if you want to be sure to capture all user login, logout and region entrance events.
##Issues##
  • At the moment, this module will not work properly if the number of regions on a simulator drops to zero without
the simulator being shutdown (this is possible if one dynamically removes regions). It will be possible to handle this
case when the next version of OpenSimulator is released
##Repository##
This module is hosted at [EVENT RECORDER]. Please report any issues with the bug tracker there.
##Credits##
##Third Party Libraries##
##References##
[EVENT RECORDER] - https://github.com/justincc/EventRecordingModule
[MODULE BUILDING] - http://opensimulator.org/wiki/IRegionModule#From_existing_module_code
[WEB INTERFACE] - https://github.com/justincc/EventRecorderWebInterface
vim: ts=4:sw=4:et:tw=120
About
This module will record various events that take place on a simulator (e.g. avatar entering a region) to some other data source for later analysis. Currently under initial development.
Resources
Readme
BSD-3-Clause license
Activity
Stars
1 star
Watchers
2 watching
Forks
5 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Universal Dark Mode - works on any site\n(function() {\n var enabled = true;\n \n function applyDarkMode() {\n if (!enabled) return;\n \n // Create style element if it doesn't exist\n var style = document.getElementById('universal-dark-mode-style');\n if (!style) {\n style = document.createElement('style');\n style.id = 'universal-dark-mode-style';\n document.head.appendChild(style);\n }\n \n // Dark mode CSS - inverts colors but preserves images/video\n style.textContent = '\n /* Invert everything except media */\n html {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #1a1a2e !important;\n }\n \n /* Restore images, videos, iframes, canvas */\n img, video, iframe, canvas, svg, picture, [style*=\"background-image\"] {\n filter: invert(1) hue-rotate(180deg) !important;\n }\n \n /* Preserve specific elements that should not be inverted */\n .no-dark-mode, .no-dark-mode *,\n [data-theme=\"light\"], [data-theme=\"light\"],\n .ace_editor, .ace_editor *,\n .CodeMirror, .CodeMirror *,\n .monaco-editor, .monaco-editor *,\n .markdown-body pre, .markdown-body pre *,\n .highlight, .highlight *,\n pre code, pre code * {\n filter: none !important;\n }\n \n /* Fix common UI elements */\n .modal, .popup, .dropdown-menu, .tooltip, .popover {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #2d2d44 !important;\n border-color: #444 !important;\n }\n \n /* Scrollbars */\n ::-webkit-scrollbar { background: #1a1a2e !important; }\n ::-webkit-scrollbar-thumb { background: #444 !important; }\n ::-webkit-scrollbar-thumb:hover { background: #555 !important; }\n \n /* Selection */\n ::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ';\n }\n \n function removeDarkMode() {\n var style = document.getElementById('universal-dark-mode-style');\n if (style) style.remove();\n }\n \n // Toggle with Alt+Shift+D\n document.addEventListener('keydown', function(e) {\n if (e.altKey && e.shiftKey && e.key === 'D') {\n e.preventDefault();\n enabled = !enabled;\n if (enabled) {\n applyDarkMode();\n console.log('[Universal Dark Mode] Enabled');\n } else {\n removeDarkMode();\n console.log('[Universal Dark Mode] Disabled');\n }\n }\n });\n \n // Apply on load\n applyDarkMode();\n \n // Re-apply on dynamic content\n var observer = new MutationObserver(function(mutations) {\n if (enabled && !document.getElementById('universal-dark-mode-style')) {\n applyDarkMode();\n }\n });\n observer.observe(document.head, { childList: true });\n \n console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');\n})();", "Universal Dark Mode");
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content
BranchesTags
Latest commit
History
81 Commits
Folders and files
NameName
Last commit message
Last commit date
config
config
doc
doc
lib
lib
src/EventRecorder
src/EventRecorder
BUILDING.md
BUILDING.md
LICENSE
LICENSE
README.md
README.md
prebuild.xml
prebuild.xml
Repository files navigation
#EventRecordingModule#
##Introduction##
This module can record various user related events that take place on a simulator for later analysis.
Events that can currently be recorded are
  1. User login.
  2. User logout.
  3. User entrance to a specific region.
  4. User chat.
  5. User to user instant messages.
  6. User to group instant messages.
##Requirements##
Like OpenSimulator 0.8 onwards, this module requires the .net 4.0 SDK. With Mono, this means that you need a version
higher than 2.8 to run it.
##Building##
  1. Copy the support libraries in lib/*.dll to $OPENSIM_BASE/bin. These are referenced in the build process.
  2. For the rest, follow the standard instructions for building modules from source [MODULE BUILDING].
##Installation##
The build process will copy the EventRecorder.dll file to $OPENSIM_BASE/bin automatically on each build. However, you
will also need to perform the following steps.
  1. If you are using a prebuilt-binary and so have not done this in the building step, copy the support libraries in
lib/*.dll to $OPENSIM_BASE/bin.
  2. Copy the [EventRecorder] section of config/EventRecorder.ini to OpenSim.ini OR copy the config/EventRecorder.ini to
$OPENSIM_BASE/bin/addon-modules/EventRecordingModule/config/EventRecorder.ini
  3. Edit the [EventRecorder] section as required. If you use the MySQL recorder, then you will also need to create the
database that you specify in the ConnectionString. You will always need to set a GridId in this section.
##Console Commands##
  • evr info - This will print out current information about the event recorder (e.g. number of events queued for writing.
Web Interface
Analyzing the generated data can be done in a number of ways. Some very basic examples are given at [WEB INTERFACE].
##Limitations##
Because this module works at the simulator level, on a multi-simulator installation of OpenSimulator it needs to be
enabled on every simulator if you want to be sure to capture all user login, logout and region entrance events.
##Issues##
  • At the moment, this module will not work properly if the number of regions on a simulator drops to zero without
the simulator being shutdown (this is possible if one dynamically removes regions). It will be possible to handle this
case when the next version of OpenSimulator is released
##Repository##
This module is hosted at [EVENT RECORDER]. Please report any issues with the bug tracker there.
##Credits##
##Third Party Libraries##
##References##
[EVENT RECORDER] - https://github.com/justincc/EventRecordingModule
[MODULE BUILDING] - http://opensimulator.org/wiki/IRegionModule#From_existing_module_code
[WEB INTERFACE] - https://github.com/justincc/EventRecorderWebInterface
vim: ts=4:sw=4:et:tw=120
About
This module will record various events that take place on a simulator (e.g. avatar entering a region) to some other data source for later analysis. Currently under initial development.
Resources
Readme
BSD-3-Clause license
Activity
Stars
1 star
Watchers
2 watching
Forks
5 forks
Report repository
Releases
Packages
Contributors
Languages