[5.15] Track btrfs patches - #20
Closed
kakra wants to merge 4 commits into
Closed
Conversation
Add the following flags to give an hint about which chunk should be allocated in which a disk. The following flags are created: - BTRFS_DEV_ALLOCATION_PREFERRED_DATA preferred data chunk, but metadata chunk allowed - BTRFS_DEV_ALLOCATION_PREFERRED_METADATA preferred metadata chunk, but data chunk allowed - BTRFS_DEV_ALLOCATION_METADATA_ONLY only metadata chunk allowed - BTRFS_DEV_ALLOCATION_DATA_ONLY only data chunk allowed Signed-off-by: Goffredo Baroncelli <kreijack@inwid.it>
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Signed-off-by: Kai Krakow <kai@kaishome.de>
When this mode is enabled, the chunk allocation policy is modified as follow. Each disk may have a different tag: - BTRFS_DEV_ALLOCATION_PREFERRED_METADATA - BTRFS_DEV_ALLOCATION_METADATA_ONLY - BTRFS_DEV_ALLOCATION_DATA_ONLY - BTRFS_DEV_ALLOCATION_PREFERRED_DATA (default) Where: - ALLOCATION_PREFERRED_X means that it is preferred to use this disk for the X chunk type (the other type may be allowed when the space is low) - ALLOCATION_X_ONLY means that it is used *only* for the X chunk type. This means also that it is a preferred choice. Each time the allocator allocates a chunk of type X , first it takes the disks tagged as ALLOCATION_X_ONLY or ALLOCATION_PREFERRED_X; if the space is not enough, it uses also the disks tagged as ALLOCATION_METADATA_ONLY; if the space is not enough, it uses also the other disks, with the exception of the one marked as ALLOCATION_PREFERRED_Y, where Y the other type of chunk (i.e. not X). Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
kakra pushed a commit
that referenced
this pull request
Sep 9, 2024
[ Upstream commit 3b65644 ] The RISC-V kernel already has checks to ensure that memory which would lie outside of the linear mapping is not used. However those checks use memory_limit, which is used to implement the mem= kernel command line option (to limit the total amount of memory, not its address range). When memory is made up of two or more non-contiguous memory banks this check is incorrect. Two changes are made here: - add a call in setup_bootmem() to memblock_cap_memory_range() which will cause any memory which falls outside the linear mapping to be removed from the memory regions. - remove the check in create_linear_mapping_page_table() which was intended to remove memory which is outside the liner mapping based on memory_limit, as it is no longer needed. Note a check for mapping more memory than memory_limit (to implement mem=) is unnecessary because of the existing call to memblock_enforce_memory_limit(). This issue was seen when booting on a SV39 platform with two memory banks: 0x00,80000000 1GiB 0x20,00000000 32GiB This memory range is 158GiB from top to bottom, but the linear mapping is limited to 128GiB, so the lower block of RAM will be mapped at PAGE_OFFSET, and the upper block straddles the top of the linear mapping. This causes the following Oops: [ 0.000000] Linux version 6.10.0-rc2-gd3b8dd5b51dd-dirty (stuart.menefy@codasip.com) (riscv64-codasip-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41.0.20231213) #20 SMP Sat Jun 22 11:34:22 BST 2024 [ 0.000000] memblock_add: [0x0000000080000000-0x00000000bfffffff] early_init_dt_add_memory_arch+0x4a/0x52 [ 0.000000] memblock_add: [0x0000002000000000-0x00000027ffffffff] early_init_dt_add_memory_arch+0x4a/0x52 ... [ 0.000000] memblock_alloc_try_nid: 23724 bytes align=0x8 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 early_init_dt_alloc_memory_arch+0x1e/0x48 [ 0.000000] memblock_reserve: [0x00000027ffff5350-0x00000027ffffaffb] memblock_alloc_range_nid+0xb8/0x132 [ 0.000000] Unable to handle kernel paging request at virtual address fffffffe7fff5350 [ 0.000000] Oops [#1] [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.10.0-rc2-gd3b8dd5b51dd-dirty #20 [ 0.000000] Hardware name: codasip,a70x (DT) [ 0.000000] epc : __memset+0x8c/0x104 [ 0.000000] ra : memblock_alloc_try_nid+0x74/0x84 [ 0.000000] epc : ffffffff805e88c8 ra : ffffffff806148f6 sp : ffffffff80e03d50 [ 0.000000] gp : ffffffff80ec4158 tp : ffffffff80e0bec0 t0 : fffffffe7fff52f8 [ 0.000000] t1 : 00000027ffffb000 t2 : 5f6b636f6c626d65 s0 : ffffffff80e03d90 [ 0.000000] s1 : 0000000000005cac a0 : fffffffe7fff5350 a1 : 0000000000000000 [ 0.000000] a2 : 0000000000005cac a3 : fffffffe7fffaff8 a4 : 000000000000002c [ 0.000000] a5 : ffffffff805e88c8 a6 : 0000000000005cac a7 : 0000000000000030 [ 0.000000] s2 : fffffffe7fff5350 s3 : ffffffffffffffff s4 : 0000000000000000 [ 0.000000] s5 : ffffffff8062347e s6 : 0000000000000000 s7 : 0000000000000001 [ 0.000000] s8 : 0000000000002000 s9 : 00000000800226d0 s10: 0000000000000000 [ 0.000000] s11: 0000000000000000 t3 : ffffffff8080a928 t4 : ffffffff8080a928 [ 0.000000] t5 : ffffffff8080a928 t6 : ffffffff8080a940 [ 0.000000] status: 0000000200000100 badaddr: fffffffe7fff5350 cause: 000000000000000f [ 0.000000] [<ffffffff805e88c8>] __memset+0x8c/0x104 [ 0.000000] [<ffffffff8062349c>] early_init_dt_alloc_memory_arch+0x1e/0x48 [ 0.000000] [<ffffffff8043e892>] __unflatten_device_tree+0x52/0x114 [ 0.000000] [<ffffffff8062441e>] unflatten_device_tree+0x9e/0xb8 [ 0.000000] [<ffffffff806046fe>] setup_arch+0xd4/0x5bc [ 0.000000] [<ffffffff806007aa>] start_kernel+0x76/0x81a [ 0.000000] Code: b823 02b2 bc23 02b2 b023 04b2 b423 04b2 b823 04b2 (bc23) 04b2 [ 0.000000] ---[ end trace 0000000000000000 ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- The problem is that memblock (unaware that some physical memory cannot be used) has allocated memory from the top of memory but which is outside the linear mapping region. Signed-off-by: Stuart Menefy <stuart.menefy@codasip.com> Fixes: c99127c ("riscv: Make sure the linear mapping does not use the kernel mapping") Reviewed-by: David McKay <david.mckay@codasip.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240622114217.2158495-1-stuart.menefy@codasip.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
kakra pushed a commit
that referenced
this pull request
Sep 9, 2024
[ Upstream commit db19d3a ] There is a race condition in the CMT interrupt handler. In the interrupt handler the driver sets a driver private flag, FLAG_IRQCONTEXT. This flag is used to indicate any call to set_next_event() should not be directly propagated to the device, but instead cached. This is done as the interrupt handler itself reprograms the device when needed before it completes and this avoids this operation to take place twice. It is unclear why this design was chosen, my suspicion is to allow the struct clock_event_device.event_handler callback, which is called while the FLAG_IRQCONTEXT is set, can update the next event without having to write to the device twice. Unfortunately there is a race between when the FLAG_IRQCONTEXT flag is set and later cleared where the interrupt handler have already started to write the next event to the device. If set_next_event() is called in this window the value is only cached in the driver but not written. This leads to the board to misbehave, or worse lockup and produce a splat. rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: rcu: 0-...!: (0 ticks this GP) idle=f5e0/0/0x0 softirq=519/519 fqs=0 (false positive?) rcu: (detected by 1, t=6502 jiffies, g=-595, q=77 ncpus=2) Sending NMI from CPU 1 to CPUs 0: NMI backtrace for cpu 0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.10.0-rc5-arm64-renesas-00019-g74a6f86eaf1c-dirty #20 Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : tick_check_broadcast_expired+0xc/0x40 lr : cpu_idle_poll.isra.0+0x8c/0x168 sp : ffff800081c63d70 x29: ffff800081c63d70 x28: 00000000580000c8 x27: 00000000bfee5610 x26: 0000000000000027 x25: 0000000000000000 x24: 0000000000000000 x23: ffff00007fbb9100 x22: ffff8000818f1008 x21: ffff8000800ef07c x20: ffff800081c79ec0 x19: ffff800081c70c28 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffc2c717d8 x14: 0000000000000000 x13: ffff000009c18080 x12: ffff8000825f7fc0 x11: 0000000000000000 x10: ffff8000818f3cd4 x9 : 0000000000000028 x8 : ffff800081c79ec0 x7 : ffff800081c73000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : ffff7ffffe286000 x3 : 0000000000000000 x2 : ffff7ffffe286000 x1 : ffff800082972900 x0 : ffff8000818f1008 Call trace: tick_check_broadcast_expired+0xc/0x40 do_idle+0x9c/0x280 cpu_startup_entry+0x34/0x40 kernel_init+0x0/0x11c do_one_initcall+0x0/0x260 __primary_switched+0x80/0x88 rcu: rcu_preempt kthread timer wakeup didn't happen for 6501 jiffies! g-595 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 rcu: Possible timer handling issue on cpu=0 timer-softirq=262 rcu: rcu_preempt kthread starved for 6502 jiffies! g-595 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:I stack:0 pid:15 tgid:15 ppid:2 flags:0x00000008 Call trace: __switch_to+0xbc/0x100 __schedule+0x358/0xbe0 schedule+0x48/0x148 schedule_timeout+0xc4/0x138 rcu_gp_fqs_loop+0x12c/0x764 rcu_gp_kthread+0x208/0x298 kthread+0x10c/0x110 ret_from_fork+0x10/0x20 The design have been part of the driver since it was first merged in early 2009. It becomes increasingly harder to trigger the issue the older kernel version one tries. It only takes a few boots on v6.10-rc5, while hundreds of boots are needed to trigger it on v5.10. Close the race condition by using the CMT channel lock for the two competing sections. The channel lock was added to the driver after its initial design. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20240702190230.3825292-1-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment
2 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Export patch series: https://github.com/kakra/linux/pull/20.patch