BranchesTags

Repository files navigation

EventStore.UI

The user interface for Event Store. This is included as a submodule in the main Event Store repository.

Running the UI

Currently there are two ways to run the UI:

  1. Open index.html located in the src folder in your browser.
  2. Execute gulp connect. The command gulp-connect runs a webserver with LiveReload (see dev section for info how to set up gulp if you are new to it). gulp connect needs gulp-cli to run, please see Dev information on how to install it properly.

Dev

To start developing, make sure you have the following requirements:

1. Install Node.js v18.12.1

If you already have another version of Node.js installed, nvm can be used to both install and set Node.js v18.12.1 as the active one:

nvm install 18.12.1
nvm use 18.12.1

nvm for Windows can be downloaded here.

nvm for Linux can be installed using the following instructions.

2. Ensure the minimum version of npm is v9.2.0

First, check your version of npm using npm --version. Install npm v9.2.0 only if your current version is below 9.2.0:

npm install -g npm@9.2.0

3. Install gulp-cli globally

Any global installation of gulpshould be removed before installing gulp-cli to avoid conflicts. The latter will run the local installation of gulp v4.0.0 which is already a devDependency in the project.

npm rm -g gulp
npm install -g gulp-cli

4. Install bower v1.8.14 globally

npm install -g bower@1.8.14

5. Install all node packages in the project

cd EventStore.UI
npm install

If npm install succeeds, go to Step 6.

If you get errors related to MSBUILD, VS2017, or VC++ on Windows, follow the steps below to install the missing dependencies:

  1. Download Visual Studio Professional 2017 (version 15.9) (Trial) setup from here.
  2. When you run the setup, go to the Individual components tab, then use the search box at the top to select these components:
  • Visual Studio C++ core features
  • VC++ 2017 version 15.4 v14.11 toolset
  • Windows 8.1 SDK
  • MSBUILD Note that other components might get added automatically; do not remove them.
  1. Click "Install", and then click on "Continue".
  2. Wait for setup to finish installing all the components and dependencies.
  3. Now run these commands in the EventStore.UI directory:
npm clean-install
npm install

6. Install all bower packages in the project

bower install

If you get the error message "bower.ps1 cannot be loaded because running scripts is disabled on this system" on Windows, run the command below in PowerShell:

Set-ExecutionPolicy -ExecutionPolicy RemoteSigned -Scope CurrentUser

Then, run bower install again.

7. Available gulp commands

// Starts webserver with live reload
gulp connect // Executes jshint
gulp lint
// Transforms HTML file templates into Angular.js module
gulp html
// Builds the project: Creates minified version of CSS, JS, etc.
gulp dist

About

The user interface for Event Store

Resources

Readme
License
Activity
Custom properties

Stars

59 stars

Watchers

26 watching

Forks

35 forks
Report repository

Releases

Packages

Used by

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { injectUserscript("// Add copy buttons to all 
 blocks\n(function() {\n function addCopyButtons() {\n document.querySelectorAll('pre code').forEach(function(codeBlock) {\n if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;\n codeBlock.parentElement.setAttribute('data-copy-added', 'true');\n \n var btn = document.createElement('button');\n btn.textContent = 'Copy';\n btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';\n btn.onmouseover = function() { this.style.opacity = '1'; };\n btn.onmouseout = function() { this.style.opacity = '0.7'; };\n btn.onclick = function() {\n navigator.clipboard.writeText(codeBlock.textContent).then(function() {\n btn.textContent = 'Copied!';\n setTimeout(function() { btn.textContent = 'Copy'; }, 1500);\n });\n };\n codeBlock.parentElement.style.position = 'relative';\n codeBlock.parentElement.appendChild(btn);\n });\n }\n \n addCopyButtons();\n \n // Re-run on dynamic content\n var observer = new MutationObserver(addCopyButtons);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Add Copy Buttons to Code Blocks");
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content
BranchesTags
Repository files navigation
EventStore.UI
The user interface for Event Store. This is included as a submodule in the main Event Store repository.
Running the UI
Currently there are two ways to run the UI:
  1. Open index.html located in the src folder in your browser.
  2. Execute gulp connect. The command gulp-connect runs a webserver with LiveReload (see dev section for info how to set up gulp if you are new to it). gulp connect needs gulp-cli to run, please see Dev information on how to install it properly.
Dev
To start developing, make sure you have the following requirements:
1. Install Node.js v18.12.1
If you already have another version of Node.js installed, nvm can be used to both install and set Node.js v18.12.1 as the active one:
nvm install 18.12.1
nvm use 18.12.1

nvm for Windows can be downloaded here.
nvm for Linux can be installed using the following instructions.
2. Ensure the minimum version of npm is v9.2.0
First, check your version of npm using npm --version. Install npm v9.2.0 only if your current version is below 9.2.0:
npm install -g npm@9.2.0

3. Install gulp-cli globally
Any global installation of gulpshould be removed before installing gulp-cli to avoid conflicts. The latter will run the local installation of gulp v4.0.0 which is already a devDependency in the project.
npm rm -g gulp
npm install -g gulp-cli

4. Install bower v1.8.14 globally
npm install -g bower@1.8.14

5. Install all node packages in the project
cd EventStore.UI
npm install

If npm install succeeds, go to Step 6.
If you get errors related to MSBUILD, VS2017, or VC++ on Windows, follow the steps below to install the missing dependencies:
  1. Download Visual Studio Professional 2017 (version 15.9) (Trial) setup from here.
  2. When you run the setup, go to the Individual components tab, then use the search box at the top to select these components:
  • Visual Studio C++ core features
  • VC++ 2017 version 15.4 v14.11 toolset
  • Windows 8.1 SDK
  • MSBUILD
Note that other components might get added automatically; do not remove them.
  1. Click "Install", and then click on "Continue".
  2. Wait for setup to finish installing all the components and dependencies.
  3. Now run these commands in the EventStore.UI directory:
npm clean-install
npm install

6. Install all bower packages in the project
bower install

If you get the error message "bower.ps1 cannot be loaded because running scripts is disabled on this system" on Windows, run the command below in PowerShell:
Set-ExecutionPolicy -ExecutionPolicy RemoteSigned -Scope CurrentUser

Then, run bower install again.
7. Available gulp commands
// Starts webserver with live reload
gulp connect // Executes jshint
gulp lint
// Transforms HTML file templates into Angular.js module
gulp html
// Builds the project: Creates minified version of CSS, JS, etc.
gulp dist

About
The user interface for Event Store
Resources
Readme
License
Activity
Custom properties
Stars
59 stars
Watchers
26 watching
Forks
35 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Force GitHub README to respect dark mode\n(function() {\n var style = document.createElement('style');\n style.textContent = '\n .markdown-body {\n color-scheme: dark light;\n }\n .markdown-body pre { background: #161b22 !important; }\n .markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }\n .markdown-body table th, .markdown-body table td { border-color: #30363d !important; }\n .markdown-body img { background: #0d1117; }\n .markdown-body blockquote { border-left-color: #8b949e; }\n .markdown-body hr { border-color: #30363d; }\n ';\n document.head.appendChild(style);\n})();", "GitHub Dark Mode README Fix");
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
EventStore.UI
The user interface for Event Store. This is included as a submodule in the main Event Store repository.
Running the UI
Currently there are two ways to run the UI:
  1. Open index.html located in the src folder in your browser.
  2. Execute gulp connect. The command gulp-connect runs a webserver with LiveReload (see dev section for info how to set up gulp if you are new to it). gulp connect needs gulp-cli to run, please see Dev information on how to install it properly.
Dev
To start developing, make sure you have the following requirements:
1. Install Node.js v18.12.1
If you already have another version of Node.js installed, nvm can be used to both install and set Node.js v18.12.1 as the active one:
nvm install 18.12.1
nvm use 18.12.1

nvm for Windows can be downloaded here.
nvm for Linux can be installed using the following instructions.
2. Ensure the minimum version of npm is v9.2.0
First, check your version of npm using npm --version. Install npm v9.2.0 only if your current version is below 9.2.0:
npm install -g npm@9.2.0

3. Install gulp-cli globally
Any global installation of gulpshould be removed before installing gulp-cli to avoid conflicts. The latter will run the local installation of gulp v4.0.0 which is already a devDependency in the project.
npm rm -g gulp
npm install -g gulp-cli

4. Install bower v1.8.14 globally
npm install -g bower@1.8.14

5. Install all node packages in the project
cd EventStore.UI
npm install

If npm install succeeds, go to Step 6.
If you get errors related to MSBUILD, VS2017, or VC++ on Windows, follow the steps below to install the missing dependencies:
  1. Download Visual Studio Professional 2017 (version 15.9) (Trial) setup from here.
  2. When you run the setup, go to the Individual components tab, then use the search box at the top to select these components:
  • Visual Studio C++ core features
  • VC++ 2017 version 15.4 v14.11 toolset
  • Windows 8.1 SDK
  • MSBUILD
Note that other components might get added automatically; do not remove them.
  1. Click "Install", and then click on "Continue".
  2. Wait for setup to finish installing all the components and dependencies.
  3. Now run these commands in the EventStore.UI directory:
npm clean-install
npm install

6. Install all bower packages in the project
bower install

If you get the error message "bower.ps1 cannot be loaded because running scripts is disabled on this system" on Windows, run the command below in PowerShell:
Set-ExecutionPolicy -ExecutionPolicy RemoteSigned -Scope CurrentUser

Then, run bower install again.
7. Available gulp commands
// Starts webserver with live reload
gulp connect // Executes jshint
gulp lint
// Transforms HTML file templates into Angular.js module
gulp html
// Builds the project: Creates minified version of CSS, JS, etc.
gulp dist

About
The user interface for Event Store
Resources
Readme
License
Activity
Custom properties
Stars
59 stars
Watchers
26 watching
Forks
35 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Highlight search terms from Google/DuckDuckGo/Bing referrer\n(function() {\n var ref = document.referrer;\n var terms = [];\n \n if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {\n var url = new URL(ref);\n var q = url.searchParams.get('q') || url.searchParams.get('p');\n if (q) {\n terms = q.split(/\\s+/).filter(function(t) { return t.length > 2; });\n }\n }\n \n if (terms.length === 0) return;\n \n var style = document.createElement('style');\n style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';\n document.head.appendChild(style);\n \n function highlight(node) {\n if (node.nodeType === 3) { // text node\n var text = node.textContent;\n var found = false;\n terms.forEach(function(term) {\n var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\\]\\\\]/g, '\\\\') + ')', 'gi');\n if (regex.test(text)) {\n found = true;\n var frag = document.createDocumentFragment();\n var parts = text.split(regex);\n parts.forEach(function(part, i) {\n if (i % 2 === 0) {\n frag.appendChild(document.createTextNode(part));\n } else {\n var span = document.createElement('span');\n span.className = 'userscript-highlight';\n span.textContent = part;\n frag.appendChild(span);\n }\n });\n node.parentNode.replaceChild(frag, node);\n }\n });\n } else if (node.nodeType === 1 && node.childNodes) { // element\n var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];\n if (!skipTags.includes(node.tagName)) {\n Array.from(node.childNodes).forEach(highlight);\n }\n }\n }\n \n highlight(document.body);\n \n // Re-highlight on dynamic content\n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1 || node.nodeType === 3) highlight(node);\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Highlight Search Terms");
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
EventStore.UI
The user interface for Event Store. This is included as a submodule in the main Event Store repository.
Running the UI
Currently there are two ways to run the UI:
  1. Open index.html located in the src folder in your browser.
  2. Execute gulp connect. The command gulp-connect runs a webserver with LiveReload (see dev section for info how to set up gulp if you are new to it). gulp connect needs gulp-cli to run, please see Dev information on how to install it properly.
Dev
To start developing, make sure you have the following requirements:
1. Install Node.js v18.12.1
If you already have another version of Node.js installed, nvm can be used to both install and set Node.js v18.12.1 as the active one:
nvm install 18.12.1
nvm use 18.12.1

nvm for Windows can be downloaded here.
nvm for Linux can be installed using the following instructions.
2. Ensure the minimum version of npm is v9.2.0
First, check your version of npm using npm --version. Install npm v9.2.0 only if your current version is below 9.2.0:
npm install -g npm@9.2.0

3. Install gulp-cli globally
Any global installation of gulpshould be removed before installing gulp-cli to avoid conflicts. The latter will run the local installation of gulp v4.0.0 which is already a devDependency in the project.
npm rm -g gulp
npm install -g gulp-cli

4. Install bower v1.8.14 globally
npm install -g bower@1.8.14

5. Install all node packages in the project
cd EventStore.UI
npm install

If npm install succeeds, go to Step 6.
If you get errors related to MSBUILD, VS2017, or VC++ on Windows, follow the steps below to install the missing dependencies:
  1. Download Visual Studio Professional 2017 (version 15.9) (Trial) setup from here.
  2. When you run the setup, go to the Individual components tab, then use the search box at the top to select these components:
  • Visual Studio C++ core features
  • VC++ 2017 version 15.4 v14.11 toolset
  • Windows 8.1 SDK
  • MSBUILD
Note that other components might get added automatically; do not remove them.
  1. Click "Install", and then click on "Continue".
  2. Wait for setup to finish installing all the components and dependencies.
  3. Now run these commands in the EventStore.UI directory:
npm clean-install
npm install

6. Install all bower packages in the project
bower install

If you get the error message "bower.ps1 cannot be loaded because running scripts is disabled on this system" on Windows, run the command below in PowerShell:
Set-ExecutionPolicy -ExecutionPolicy RemoteSigned -Scope CurrentUser

Then, run bower install again.
7. Available gulp commands
// Starts webserver with live reload
gulp connect // Executes jshint
gulp lint
// Transforms HTML file templates into Angular.js module
gulp html
// Builds the project: Creates minified version of CSS, JS, etc.
gulp dist

About
The user interface for Event Store
Resources
Readme
License
Activity
Custom properties
Stars
59 stars
Watchers
26 watching
Forks
35 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Strip utm_, fbclid, gclid, etc. from all links on page\n(function() {\n var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',\n 'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',\n 'ref', 'ref_src', 'source', 'medium', 'campaign'];\n \n function cleanUrl(url) {\n try {\n var u = new URL(url, window.location.origin);\n var changed = false;\n trackingParams.forEach(function(p) {\n if (u.searchParams.has(p)) {\n u.searchParams.delete(p);\n changed = true;\n }\n });\n return changed ? u.toString() : url;\n } catch (e) {\n return url;\n }\n }\n \n function cleanLinks() {\n document.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n \n cleanLinks();\n \n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1) {\n if (node.tagName === 'A') cleanLinks();\n node.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Remove Tracking Parameters from Links");
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content
BranchesTags
Repository files navigation
EventStore.UI
The user interface for Event Store. This is included as a submodule in the main Event Store repository.
Running the UI
Currently there are two ways to run the UI:
  1. Open index.html located in the src folder in your browser.
  2. Execute gulp connect. The command gulp-connect runs a webserver with LiveReload (see dev section for info how to set up gulp if you are new to it). gulp connect needs gulp-cli to run, please see Dev information on how to install it properly.
Dev
To start developing, make sure you have the following requirements:
1. Install Node.js v18.12.1
If you already have another version of Node.js installed, nvm can be used to both install and set Node.js v18.12.1 as the active one:
nvm install 18.12.1
nvm use 18.12.1

nvm for Windows can be downloaded here.
nvm for Linux can be installed using the following instructions.
2. Ensure the minimum version of npm is v9.2.0
First, check your version of npm using npm --version. Install npm v9.2.0 only if your current version is below 9.2.0:
npm install -g npm@9.2.0

3. Install gulp-cli globally
Any global installation of gulpshould be removed before installing gulp-cli to avoid conflicts. The latter will run the local installation of gulp v4.0.0 which is already a devDependency in the project.
npm rm -g gulp
npm install -g gulp-cli

4. Install bower v1.8.14 globally
npm install -g bower@1.8.14

5. Install all node packages in the project
cd EventStore.UI
npm install

If npm install succeeds, go to Step 6.
If you get errors related to MSBUILD, VS2017, or VC++ on Windows, follow the steps below to install the missing dependencies:
  1. Download Visual Studio Professional 2017 (version 15.9) (Trial) setup from here.
  2. When you run the setup, go to the Individual components tab, then use the search box at the top to select these components:
  • Visual Studio C++ core features
  • VC++ 2017 version 15.4 v14.11 toolset
  • Windows 8.1 SDK
  • MSBUILD
Note that other components might get added automatically; do not remove them.
  1. Click "Install", and then click on "Continue".
  2. Wait for setup to finish installing all the components and dependencies.
  3. Now run these commands in the EventStore.UI directory:
npm clean-install
npm install

6. Install all bower packages in the project
bower install

If you get the error message "bower.ps1 cannot be loaded because running scripts is disabled on this system" on Windows, run the command below in PowerShell:
Set-ExecutionPolicy -ExecutionPolicy RemoteSigned -Scope CurrentUser

Then, run bower install again.
7. Available gulp commands
// Starts webserver with live reload
gulp connect // Executes jshint
gulp lint
// Transforms HTML file templates into Angular.js module
gulp html
// Builds the project: Creates minified version of CSS, JS, etc.
gulp dist

About
The user interface for Event Store
Resources
Readme
License
Activity
Custom properties
Stars
59 stars
Watchers
26 watching
Forks
35 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Auto-enable theater mode on YouTube\n(function() {\n function tryTheater() {\n var btn = document.querySelector('button[aria-label=\"Theater mode\"], ytd-player #player button[title=\"Theater mode\"]');\n if (btn && !btn.classList.contains('activated')) {\n btn.click();\n }\n }\n \n // Try immediately\n tryTheater();\n \n // Try after navigation (SPA)\n var lastUrl = location.href;\n setInterval(function() {\n if (location.href !== lastUrl) {\n lastUrl = location.href;\n setTimeout(tryTheater, 500);\n }\n }, 1000);\n \n // Also try on player load\n var observer = new MutationObserver(tryTheater);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "YouTube Theater Mode Default");
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
EventStore.UI
The user interface for Event Store. This is included as a submodule in the main Event Store repository.
Running the UI
Currently there are two ways to run the UI:
  1. Open index.html located in the src folder in your browser.
  2. Execute gulp connect. The command gulp-connect runs a webserver with LiveReload (see dev section for info how to set up gulp if you are new to it). gulp connect needs gulp-cli to run, please see Dev information on how to install it properly.
Dev
To start developing, make sure you have the following requirements:
1. Install Node.js v18.12.1
If you already have another version of Node.js installed, nvm can be used to both install and set Node.js v18.12.1 as the active one:
nvm install 18.12.1
nvm use 18.12.1

nvm for Windows can be downloaded here.
nvm for Linux can be installed using the following instructions.
2. Ensure the minimum version of npm is v9.2.0
First, check your version of npm using npm --version. Install npm v9.2.0 only if your current version is below 9.2.0:
npm install -g npm@9.2.0

3. Install gulp-cli globally
Any global installation of gulpshould be removed before installing gulp-cli to avoid conflicts. The latter will run the local installation of gulp v4.0.0 which is already a devDependency in the project.
npm rm -g gulp
npm install -g gulp-cli

4. Install bower v1.8.14 globally
npm install -g bower@1.8.14

5. Install all node packages in the project
cd EventStore.UI
npm install

If npm install succeeds, go to Step 6.
If you get errors related to MSBUILD, VS2017, or VC++ on Windows, follow the steps below to install the missing dependencies:
  1. Download Visual Studio Professional 2017 (version 15.9) (Trial) setup from here.
  2. When you run the setup, go to the Individual components tab, then use the search box at the top to select these components:
  • Visual Studio C++ core features
  • VC++ 2017 version 15.4 v14.11 toolset
  • Windows 8.1 SDK
  • MSBUILD
Note that other components might get added automatically; do not remove them.
  1. Click "Install", and then click on "Continue".
  2. Wait for setup to finish installing all the components and dependencies.
  3. Now run these commands in the EventStore.UI directory:
npm clean-install
npm install

6. Install all bower packages in the project
bower install

If you get the error message "bower.ps1 cannot be loaded because running scripts is disabled on this system" on Windows, run the command below in PowerShell:
Set-ExecutionPolicy -ExecutionPolicy RemoteSigned -Scope CurrentUser

Then, run bower install again.
7. Available gulp commands
// Starts webserver with live reload
gulp connect // Executes jshint
gulp lint
// Transforms HTML file templates into Angular.js module
gulp html
// Builds the project: Creates minified version of CSS, JS, etc.
gulp dist

About
The user interface for Event Store
Resources
Readme
License
Activity
Custom properties
Stars
59 stars
Watchers
26 watching
Forks
35 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Remove or un-stick sticky/fixed headers that block content\n(function() {\n function unstick() {\n document.querySelectorAll('header, nav, [role=\"banner\"], .header, .navbar, .sticky, .fixed-top, [style*=\"position: fixed\"], [style*=\"position:sticky\"]').forEach(function(el) {\n if (el.style.position === 'fixed' || el.style.position === 'sticky' || \n getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {\n el.style.position = 'static';\n el.style.top = 'auto';\n el.style.zIndex = 'auto';\n }\n });\n }\n \n unstick();\n \n var observer = new MutationObserver(unstick);\n observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });\n})();", "Kill Sticky Headers");
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
EventStore.UI
The user interface for Event Store. This is included as a submodule in the main Event Store repository.
Running the UI
Currently there are two ways to run the UI:
  1. Open index.html located in the src folder in your browser.
  2. Execute gulp connect. The command gulp-connect runs a webserver with LiveReload (see dev section for info how to set up gulp if you are new to it). gulp connect needs gulp-cli to run, please see Dev information on how to install it properly.
Dev
To start developing, make sure you have the following requirements:
1. Install Node.js v18.12.1
If you already have another version of Node.js installed, nvm can be used to both install and set Node.js v18.12.1 as the active one:
nvm install 18.12.1
nvm use 18.12.1

nvm for Windows can be downloaded here.
nvm for Linux can be installed using the following instructions.
2. Ensure the minimum version of npm is v9.2.0
First, check your version of npm using npm --version. Install npm v9.2.0 only if your current version is below 9.2.0:
npm install -g npm@9.2.0

3. Install gulp-cli globally
Any global installation of gulpshould be removed before installing gulp-cli to avoid conflicts. The latter will run the local installation of gulp v4.0.0 which is already a devDependency in the project.
npm rm -g gulp
npm install -g gulp-cli

4. Install bower v1.8.14 globally
npm install -g bower@1.8.14

5. Install all node packages in the project
cd EventStore.UI
npm install

If npm install succeeds, go to Step 6.
If you get errors related to MSBUILD, VS2017, or VC++ on Windows, follow the steps below to install the missing dependencies:
  1. Download Visual Studio Professional 2017 (version 15.9) (Trial) setup from here.
  2. When you run the setup, go to the Individual components tab, then use the search box at the top to select these components:
  • Visual Studio C++ core features
  • VC++ 2017 version 15.4 v14.11 toolset
  • Windows 8.1 SDK
  • MSBUILD
Note that other components might get added automatically; do not remove them.
  1. Click "Install", and then click on "Continue".
  2. Wait for setup to finish installing all the components and dependencies.
  3. Now run these commands in the EventStore.UI directory:
npm clean-install
npm install

6. Install all bower packages in the project
bower install

If you get the error message "bower.ps1 cannot be loaded because running scripts is disabled on this system" on Windows, run the command below in PowerShell:
Set-ExecutionPolicy -ExecutionPolicy RemoteSigned -Scope CurrentUser

Then, run bower install again.
7. Available gulp commands
// Starts webserver with live reload
gulp connect // Executes jshint
gulp lint
// Transforms HTML file templates into Angular.js module
gulp html
// Builds the project: Creates minified version of CSS, JS, etc.
gulp dist

About
The user interface for Event Store
Resources
Readme
License
Activity
Custom properties
Stars
59 stars
Watchers
26 watching
Forks
35 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Universal Dark Mode - works on any site\n(function() {\n var enabled = true;\n \n function applyDarkMode() {\n if (!enabled) return;\n \n // Create style element if it doesn't exist\n var style = document.getElementById('universal-dark-mode-style');\n if (!style) {\n style = document.createElement('style');\n style.id = 'universal-dark-mode-style';\n document.head.appendChild(style);\n }\n \n // Dark mode CSS - inverts colors but preserves images/video\n style.textContent = '\n /* Invert everything except media */\n html {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #1a1a2e !important;\n }\n \n /* Restore images, videos, iframes, canvas */\n img, video, iframe, canvas, svg, picture, [style*=\"background-image\"] {\n filter: invert(1) hue-rotate(180deg) !important;\n }\n \n /* Preserve specific elements that should not be inverted */\n .no-dark-mode, .no-dark-mode *,\n [data-theme=\"light\"], [data-theme=\"light\"],\n .ace_editor, .ace_editor *,\n .CodeMirror, .CodeMirror *,\n .monaco-editor, .monaco-editor *,\n .markdown-body pre, .markdown-body pre *,\n .highlight, .highlight *,\n pre code, pre code * {\n filter: none !important;\n }\n \n /* Fix common UI elements */\n .modal, .popup, .dropdown-menu, .tooltip, .popover {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #2d2d44 !important;\n border-color: #444 !important;\n }\n \n /* Scrollbars */\n ::-webkit-scrollbar { background: #1a1a2e !important; }\n ::-webkit-scrollbar-thumb { background: #444 !important; }\n ::-webkit-scrollbar-thumb:hover { background: #555 !important; }\n \n /* Selection */\n ::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ';\n }\n \n function removeDarkMode() {\n var style = document.getElementById('universal-dark-mode-style');\n if (style) style.remove();\n }\n \n // Toggle with Alt+Shift+D\n document.addEventListener('keydown', function(e) {\n if (e.altKey && e.shiftKey && e.key === 'D') {\n e.preventDefault();\n enabled = !enabled;\n if (enabled) {\n applyDarkMode();\n console.log('[Universal Dark Mode] Enabled');\n } else {\n removeDarkMode();\n console.log('[Universal Dark Mode] Disabled');\n }\n }\n });\n \n // Apply on load\n applyDarkMode();\n \n // Re-apply on dynamic content\n var observer = new MutationObserver(function(mutations) {\n if (enabled && !document.getElementById('universal-dark-mode-style')) {\n applyDarkMode();\n }\n });\n observer.observe(document.head, { childList: true });\n \n console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');\n})();", "Universal Dark Mode");
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content
BranchesTags
Repository files navigation
EventStore.UI
The user interface for Event Store. This is included as a submodule in the main Event Store repository.
Running the UI
Currently there are two ways to run the UI:
  1. Open index.html located in the src folder in your browser.
  2. Execute gulp connect. The command gulp-connect runs a webserver with LiveReload (see dev section for info how to set up gulp if you are new to it). gulp connect needs gulp-cli to run, please see Dev information on how to install it properly.
Dev
To start developing, make sure you have the following requirements:
1. Install Node.js v18.12.1
If you already have another version of Node.js installed, nvm can be used to both install and set Node.js v18.12.1 as the active one:
nvm install 18.12.1
nvm use 18.12.1

nvm for Windows can be downloaded here.
nvm for Linux can be installed using the following instructions.
2. Ensure the minimum version of npm is v9.2.0
First, check your version of npm using npm --version. Install npm v9.2.0 only if your current version is below 9.2.0:
npm install -g npm@9.2.0

3. Install gulp-cli globally
Any global installation of gulpshould be removed before installing gulp-cli to avoid conflicts. The latter will run the local installation of gulp v4.0.0 which is already a devDependency in the project.
npm rm -g gulp
npm install -g gulp-cli

4. Install bower v1.8.14 globally
npm install -g bower@1.8.14

5. Install all node packages in the project
cd EventStore.UI
npm install

If npm install succeeds, go to Step 6.
If you get errors related to MSBUILD, VS2017, or VC++ on Windows, follow the steps below to install the missing dependencies:
  1. Download Visual Studio Professional 2017 (version 15.9) (Trial) setup from here.
  2. When you run the setup, go to the Individual components tab, then use the search box at the top to select these components:
  • Visual Studio C++ core features
  • VC++ 2017 version 15.4 v14.11 toolset
  • Windows 8.1 SDK
  • MSBUILD
Note that other components might get added automatically; do not remove them.
  1. Click "Install", and then click on "Continue".
  2. Wait for setup to finish installing all the components and dependencies.
  3. Now run these commands in the EventStore.UI directory:
npm clean-install
npm install

6. Install all bower packages in the project
bower install

If you get the error message "bower.ps1 cannot be loaded because running scripts is disabled on this system" on Windows, run the command below in PowerShell:
Set-ExecutionPolicy -ExecutionPolicy RemoteSigned -Scope CurrentUser

Then, run bower install again.
7. Available gulp commands
// Starts webserver with live reload
gulp connect // Executes jshint
gulp lint
// Transforms HTML file templates into Angular.js module
gulp html
// Builds the project: Creates minified version of CSS, JS, etc.
gulp dist

About
The user interface for Event Store
Resources
Readme
License
Activity
Custom properties
Stars
59 stars
Watchers
26 watching
Forks
35 forks
Report repository
Releases
Packages
Used by
Contributors
Languages