build: byte-identical CI/local builds via --remap-path-prefix - #9

Merged
HarryR merged 2 commits into
mainfrom
reproducible-builds
Jul 10, 2026
Merged

build: byte-identical CI/local builds via --remap-path-prefix#9
HarryR merged 2 commits into
mainfrom
reproducible-builds

Conversation

@HarryR

@HarryRHarryR commented Jul 9, 2026

Copy link
Copy Markdown
Contributor

What

Make CI and local builds bit-identical so the measured stage0.efi (PCR4/14) reproduces independently.

Why

CI builds with CARGO_HOME=/tmp/.cargo while local uses /src/.cargo; rustc embeds dependency source paths, so each baked different absolute registry paths into stage0.efi.

Fix

--remap-path-prefix=/src/.cargo=/cargo + =/tmp/.cargo=/cargo in every artifact-producing target (musl x2, uefi x2) -> build is CARGO_HOME-independent. Verified locally: stage0.efi contains only /cargo/registry paths (0 /src, 0 /tmp). (trim-paths would be cleaner but is nightly-only on 1.91.)

Verification

This PR's CI run builds the db-signed BOOTX64.EFI; grepping it should show only /cargo paths (no /tmp//src), proving CARGO_HOME-independence. Local reference (x86_64): stage0.efi 433bea84, ena.efi e4957fe6.

Pairs with lockboot/stage1's reproducibility PR.

🤖 Generated with Claude Code

HarryRand others added 2 commits July 9, 2026 19:36
@HarryR@claude
build: make CI and local builds byte-identical via --remap-path-prefix
0068abf
CI and local produced different measured binaries (stage0.efi and thus PCR4/14).
Root cause: rustc embeds dependency source paths, and CI runs with
CARGO_HOME=/tmp/.cargo (the Makefile's CI cache redirect) while local uses
/src/.cargo, baking different absolute registry paths into the binary.
Fix: --remap-path-prefix in every artifact-producing target's rustflags (musl
x2, uefi x2) rewrites both /src/.cargo and /tmp/.cargo to a fixed /cargo, so the
build no longer depends on where CARGO_HOME is. Verified: after the remap
stage0.efi contains only /cargo/registry paths (0 /src, 0 /tmp). trim-paths
would be cleaner but is still nightly-only on 1.91.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
@HarryR@claude
build: also remap the rust-src sysroot path so CI==local with rust-an…
dfae5ed
…alyzer
The CARGO_HOME remap left one divergence: when rust-src is installed (rust-
analyzer does this in the local shared rustup; CI's fresh toolchain has not),
rustc emits std panic-location paths from the sysroot instead of the baked
/rustc/<hash> that CI produces. Remap that sysroot path to the same
/rustc/<hash> on every artifact target so the two converge.
Verified: local stage0.efi is now fully path-canonical (0 /src/.cargo, 0
/src/.rustup; only /cargo + /rustc), matching CI's build. The remap is a no-op
in CI (no rust-src there). The hash is toolchain-specific; update it when
bumping the toolchain (a stale value silently no-ops, which CI==local catches).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
@HarryRHarryR mentioned this pull request Jul 10, 2026
Merged
@HarryR
HarryR marked this pull request as ready for review July 10, 2026 06:49
@HarryR
HarryR merged commit 7e60a62 into mainJul 10, 2026
3 checks passed
@HarryR
HarryR deleted the reproducible-builds branch July 10, 2026 06:51
Sign up for freeto join this conversation on GitHub. Already have an account? Sign in to comment

Reviewers

No reviews

Assignees

No one assigned

Labels

None yet

Projects

None yet

Milestone

No milestone

Development

Successfully merging this pull request may close these issues.

1 participant

@HarryR
, 'i'); if (__m === '*' || __re.test(location.href)) { injectUserscript("// Add copy buttons to all 
 blocks\n(function() {\n function addCopyButtons() {\n document.querySelectorAll('pre code').forEach(function(codeBlock) {\n if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;\n codeBlock.parentElement.setAttribute('data-copy-added', 'true');\n \n var btn = document.createElement('button');\n btn.textContent = 'Copy';\n btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';\n btn.onmouseover = function() { this.style.opacity = '1'; };\n btn.onmouseout = function() { this.style.opacity = '0.7'; };\n btn.onclick = function() {\n navigator.clipboard.writeText(codeBlock.textContent).then(function() {\n btn.textContent = 'Copied!';\n setTimeout(function() { btn.textContent = 'Copy'; }, 1500);\n });\n };\n codeBlock.parentElement.style.position = 'relative';\n codeBlock.parentElement.appendChild(btn);\n });\n }\n \n addCopyButtons();\n \n // Re-run on dynamic content\n var observer = new MutationObserver(addCopyButtons);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Add Copy Buttons to Code Blocks");
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content
build: byte-identical CI/local builds via --remap-path-prefix - #9
Merged
HarryR merged 2 commits into
mainfrom 
reproducible-builds
Jul 10, 2026
Merged
build: byte-identical CI/local builds via --remap-path-prefix#9
HarryR merged 2 commits into
mainfrom 
reproducible-builds
Conversation
@HarryR
@HarryRHarryR
commented
Jul 9, 2026

Copy link


Copy Markdown

Contributor
What
Make CI and local builds bit-identical so the measured stage0.efi (PCR4/14) reproduces independently.
Why
CI builds with CARGO_HOME=/tmp/.cargo while local uses /src/.cargo; rustc embeds dependency source paths, so each baked different absolute registry paths into stage0.efi.
Fix
--remap-path-prefix=/src/.cargo=/cargo + =/tmp/.cargo=/cargo in every artifact-producing target (musl x2, uefi x2) -> build is CARGO_HOME-independent. Verified locally: stage0.efi contains only /cargo/registry paths (0 /src, 0 /tmp). (trim-paths would be cleaner but is nightly-only on 1.91.)
Verification
This PR's CI run builds the db-signed BOOTX64.EFI; grepping it should show only /cargo paths (no /tmp//src), proving CARGO_HOME-independence. Local reference (x86_64): stage0.efi 433bea84, ena.efi e4957fe6.
Pairs with lockboot/stage1's reproducibility PR.
🤖 Generated with Claude Code
HarryRand others
added 2 commits
July 9, 2026 19:36
@HarryR@claude
build: make CI and local builds byte-identical via --remap-path-prefix
0068abf
CI and local produced different measured binaries (stage0.efi and thus PCR4/14).
Root cause: rustc embeds dependency source paths, and CI runs with
CARGO_HOME=/tmp/.cargo (the Makefile's CI cache redirect) while local uses
/src/.cargo, baking different absolute registry paths into the binary.
Fix: --remap-path-prefix in every artifact-producing target's rustflags (musl
x2, uefi x2) rewrites both /src/.cargo and /tmp/.cargo to a fixed /cargo, so the
build no longer depends on where CARGO_HOME is. Verified: after the remap
stage0.efi contains only /cargo/registry paths (0 /src, 0 /tmp). trim-paths
would be cleaner but is still nightly-only on 1.91.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
@HarryR@claude
build: also remap the rust-src sysroot path so CI==local with rust-an…
dfae5ed
…alyzer
The CARGO_HOME remap left one divergence: when rust-src is installed (rust-
analyzer does this in the local shared rustup; CI's fresh toolchain has not),
rustc emits std panic-location paths from the sysroot instead of the baked
/rustc/<hash> that CI produces. Remap that sysroot path to the same
/rustc/<hash> on every artifact target so the two converge.
Verified: local stage0.efi is now fully path-canonical (0 /src/.cargo, 0
/src/.rustup; only /cargo + /rustc), matching CI's build. The remap is a no-op
in CI (no rust-src there). The hash is toolchain-specific; update it when
bumping the toolchain (a stale value silently no-ops, which CI==local catches).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
@HarryRHarryR
mentioned this pull request
Jul 10, 2026
 Merged

@HarryR
HarryR
marked this pull request as ready for review
July 10, 2026 06:49
@HarryR
HarryR
merged commit 7e60a62
into
mainJul 10, 2026

3 checks passed

@HarryR
HarryR
deleted the

reproducible-builds

branch
July 10, 2026 06:51
Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers


No reviews


Assignees


No one assigned


Labels


None yet


Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

1 participant

@HarryR

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Force GitHub README to respect dark mode\n(function() {\n var style = document.createElement('style');\n style.textContent = '\n .markdown-body {\n color-scheme: dark light;\n }\n .markdown-body pre { background: #161b22 !important; }\n .markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }\n .markdown-body table th, .markdown-body table td { border-color: #30363d !important; }\n .markdown-body img { background: #0d1117; }\n .markdown-body blockquote { border-left-color: #8b949e; }\n .markdown-body hr { border-color: #30363d; }\n ';\n document.head.appendChild(style);\n})();", "GitHub Dark Mode README Fix");
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
build: byte-identical CI/local builds via --remap-path-prefix - #9
Merged
HarryR merged 2 commits into
mainfrom 
reproducible-builds
Jul 10, 2026
Merged
build: byte-identical CI/local builds via --remap-path-prefix#9
HarryR merged 2 commits into
mainfrom 
reproducible-builds
Conversation
@HarryR
@HarryRHarryR
commented
Jul 9, 2026

Copy link


Copy Markdown

Contributor
What
Make CI and local builds bit-identical so the measured stage0.efi (PCR4/14) reproduces independently.
Why
CI builds with CARGO_HOME=/tmp/.cargo while local uses /src/.cargo; rustc embeds dependency source paths, so each baked different absolute registry paths into stage0.efi.
Fix
--remap-path-prefix=/src/.cargo=/cargo + =/tmp/.cargo=/cargo in every artifact-producing target (musl x2, uefi x2) -> build is CARGO_HOME-independent. Verified locally: stage0.efi contains only /cargo/registry paths (0 /src, 0 /tmp). (trim-paths would be cleaner but is nightly-only on 1.91.)
Verification
This PR's CI run builds the db-signed BOOTX64.EFI; grepping it should show only /cargo paths (no /tmp//src), proving CARGO_HOME-independence. Local reference (x86_64): stage0.efi 433bea84, ena.efi e4957fe6.
Pairs with lockboot/stage1's reproducibility PR.
🤖 Generated with Claude Code
HarryRand others
added 2 commits
July 9, 2026 19:36
@HarryR@claude
build: make CI and local builds byte-identical via --remap-path-prefix
0068abf
CI and local produced different measured binaries (stage0.efi and thus PCR4/14).
Root cause: rustc embeds dependency source paths, and CI runs with
CARGO_HOME=/tmp/.cargo (the Makefile's CI cache redirect) while local uses
/src/.cargo, baking different absolute registry paths into the binary.
Fix: --remap-path-prefix in every artifact-producing target's rustflags (musl
x2, uefi x2) rewrites both /src/.cargo and /tmp/.cargo to a fixed /cargo, so the
build no longer depends on where CARGO_HOME is. Verified: after the remap
stage0.efi contains only /cargo/registry paths (0 /src, 0 /tmp). trim-paths
would be cleaner but is still nightly-only on 1.91.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
@HarryR@claude
build: also remap the rust-src sysroot path so CI==local with rust-an…
dfae5ed
…alyzer
The CARGO_HOME remap left one divergence: when rust-src is installed (rust-
analyzer does this in the local shared rustup; CI's fresh toolchain has not),
rustc emits std panic-location paths from the sysroot instead of the baked
/rustc/<hash> that CI produces. Remap that sysroot path to the same
/rustc/<hash> on every artifact target so the two converge.
Verified: local stage0.efi is now fully path-canonical (0 /src/.cargo, 0
/src/.rustup; only /cargo + /rustc), matching CI's build. The remap is a no-op
in CI (no rust-src there). The hash is toolchain-specific; update it when
bumping the toolchain (a stale value silently no-ops, which CI==local catches).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
@HarryRHarryR
mentioned this pull request
Jul 10, 2026
 Merged

@HarryR
HarryR
marked this pull request as ready for review
July 10, 2026 06:49
@HarryR
HarryR
merged commit 7e60a62
into
mainJul 10, 2026

3 checks passed

@HarryR
HarryR
deleted the

reproducible-builds

branch
July 10, 2026 06:51
Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers


No reviews


Assignees


No one assigned


Labels


None yet


Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

1 participant

@HarryR

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Highlight search terms from Google/DuckDuckGo/Bing referrer\n(function() {\n var ref = document.referrer;\n var terms = [];\n \n if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {\n var url = new URL(ref);\n var q = url.searchParams.get('q') || url.searchParams.get('p');\n if (q) {\n terms = q.split(/\\s+/).filter(function(t) { return t.length > 2; });\n }\n }\n \n if (terms.length === 0) return;\n \n var style = document.createElement('style');\n style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';\n document.head.appendChild(style);\n \n function highlight(node) {\n if (node.nodeType === 3) { // text node\n var text = node.textContent;\n var found = false;\n terms.forEach(function(term) {\n var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\\]\\\\]/g, '\\\\') + ')', 'gi');\n if (regex.test(text)) {\n found = true;\n var frag = document.createDocumentFragment();\n var parts = text.split(regex);\n parts.forEach(function(part, i) {\n if (i % 2 === 0) {\n frag.appendChild(document.createTextNode(part));\n } else {\n var span = document.createElement('span');\n span.className = 'userscript-highlight';\n span.textContent = part;\n frag.appendChild(span);\n }\n });\n node.parentNode.replaceChild(frag, node);\n }\n });\n } else if (node.nodeType === 1 && node.childNodes) { // element\n var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];\n if (!skipTags.includes(node.tagName)) {\n Array.from(node.childNodes).forEach(highlight);\n }\n }\n }\n \n highlight(document.body);\n \n // Re-highlight on dynamic content\n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1 || node.nodeType === 3) highlight(node);\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Highlight Search Terms");
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
build: byte-identical CI/local builds via --remap-path-prefix - #9
Merged
HarryR merged 2 commits into
mainfrom 
reproducible-builds
Jul 10, 2026
Merged
build: byte-identical CI/local builds via --remap-path-prefix#9
HarryR merged 2 commits into
mainfrom 
reproducible-builds
Conversation
@HarryR
@HarryRHarryR
commented
Jul 9, 2026

Copy link


Copy Markdown

Contributor
What
Make CI and local builds bit-identical so the measured stage0.efi (PCR4/14) reproduces independently.
Why
CI builds with CARGO_HOME=/tmp/.cargo while local uses /src/.cargo; rustc embeds dependency source paths, so each baked different absolute registry paths into stage0.efi.
Fix
--remap-path-prefix=/src/.cargo=/cargo + =/tmp/.cargo=/cargo in every artifact-producing target (musl x2, uefi x2) -> build is CARGO_HOME-independent. Verified locally: stage0.efi contains only /cargo/registry paths (0 /src, 0 /tmp). (trim-paths would be cleaner but is nightly-only on 1.91.)
Verification
This PR's CI run builds the db-signed BOOTX64.EFI; grepping it should show only /cargo paths (no /tmp//src), proving CARGO_HOME-independence. Local reference (x86_64): stage0.efi 433bea84, ena.efi e4957fe6.
Pairs with lockboot/stage1's reproducibility PR.
🤖 Generated with Claude Code
HarryRand others
added 2 commits
July 9, 2026 19:36
@HarryR@claude
build: make CI and local builds byte-identical via --remap-path-prefix
0068abf
CI and local produced different measured binaries (stage0.efi and thus PCR4/14).
Root cause: rustc embeds dependency source paths, and CI runs with
CARGO_HOME=/tmp/.cargo (the Makefile's CI cache redirect) while local uses
/src/.cargo, baking different absolute registry paths into the binary.
Fix: --remap-path-prefix in every artifact-producing target's rustflags (musl
x2, uefi x2) rewrites both /src/.cargo and /tmp/.cargo to a fixed /cargo, so the
build no longer depends on where CARGO_HOME is. Verified: after the remap
stage0.efi contains only /cargo/registry paths (0 /src, 0 /tmp). trim-paths
would be cleaner but is still nightly-only on 1.91.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
@HarryR@claude
build: also remap the rust-src sysroot path so CI==local with rust-an…
dfae5ed
…alyzer
The CARGO_HOME remap left one divergence: when rust-src is installed (rust-
analyzer does this in the local shared rustup; CI's fresh toolchain has not),
rustc emits std panic-location paths from the sysroot instead of the baked
/rustc/<hash> that CI produces. Remap that sysroot path to the same
/rustc/<hash> on every artifact target so the two converge.
Verified: local stage0.efi is now fully path-canonical (0 /src/.cargo, 0
/src/.rustup; only /cargo + /rustc), matching CI's build. The remap is a no-op
in CI (no rust-src there). The hash is toolchain-specific; update it when
bumping the toolchain (a stale value silently no-ops, which CI==local catches).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
@HarryRHarryR
mentioned this pull request
Jul 10, 2026
 Merged

@HarryR
HarryR
marked this pull request as ready for review
July 10, 2026 06:49
@HarryR
HarryR
merged commit 7e60a62
into
mainJul 10, 2026

3 checks passed

@HarryR
HarryR
deleted the

reproducible-builds

branch
July 10, 2026 06:51
Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers


No reviews


Assignees


No one assigned


Labels


None yet


Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

1 participant

@HarryR

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Strip utm_, fbclid, gclid, etc. from all links on page\n(function() {\n var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',\n 'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',\n 'ref', 'ref_src', 'source', 'medium', 'campaign'];\n \n function cleanUrl(url) {\n try {\n var u = new URL(url, window.location.origin);\n var changed = false;\n trackingParams.forEach(function(p) {\n if (u.searchParams.has(p)) {\n u.searchParams.delete(p);\n changed = true;\n }\n });\n return changed ? u.toString() : url;\n } catch (e) {\n return url;\n }\n }\n \n function cleanLinks() {\n document.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n \n cleanLinks();\n \n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1) {\n if (node.tagName === 'A') cleanLinks();\n node.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Remove Tracking Parameters from Links");
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content
build: byte-identical CI/local builds via --remap-path-prefix - #9
Merged
HarryR merged 2 commits into
mainfrom 
reproducible-builds
Jul 10, 2026
Merged
build: byte-identical CI/local builds via --remap-path-prefix#9
HarryR merged 2 commits into
mainfrom 
reproducible-builds
Conversation
@HarryR
@HarryRHarryR
commented
Jul 9, 2026

Copy link


Copy Markdown

Contributor
What
Make CI and local builds bit-identical so the measured stage0.efi (PCR4/14) reproduces independently.
Why
CI builds with CARGO_HOME=/tmp/.cargo while local uses /src/.cargo; rustc embeds dependency source paths, so each baked different absolute registry paths into stage0.efi.
Fix
--remap-path-prefix=/src/.cargo=/cargo + =/tmp/.cargo=/cargo in every artifact-producing target (musl x2, uefi x2) -> build is CARGO_HOME-independent. Verified locally: stage0.efi contains only /cargo/registry paths (0 /src, 0 /tmp). (trim-paths would be cleaner but is nightly-only on 1.91.)
Verification
This PR's CI run builds the db-signed BOOTX64.EFI; grepping it should show only /cargo paths (no /tmp//src), proving CARGO_HOME-independence. Local reference (x86_64): stage0.efi 433bea84, ena.efi e4957fe6.
Pairs with lockboot/stage1's reproducibility PR.
🤖 Generated with Claude Code
HarryRand others
added 2 commits
July 9, 2026 19:36
@HarryR@claude
build: make CI and local builds byte-identical via --remap-path-prefix
0068abf
CI and local produced different measured binaries (stage0.efi and thus PCR4/14).
Root cause: rustc embeds dependency source paths, and CI runs with
CARGO_HOME=/tmp/.cargo (the Makefile's CI cache redirect) while local uses
/src/.cargo, baking different absolute registry paths into the binary.
Fix: --remap-path-prefix in every artifact-producing target's rustflags (musl
x2, uefi x2) rewrites both /src/.cargo and /tmp/.cargo to a fixed /cargo, so the
build no longer depends on where CARGO_HOME is. Verified: after the remap
stage0.efi contains only /cargo/registry paths (0 /src, 0 /tmp). trim-paths
would be cleaner but is still nightly-only on 1.91.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
@HarryR@claude
build: also remap the rust-src sysroot path so CI==local with rust-an…
dfae5ed
…alyzer
The CARGO_HOME remap left one divergence: when rust-src is installed (rust-
analyzer does this in the local shared rustup; CI's fresh toolchain has not),
rustc emits std panic-location paths from the sysroot instead of the baked
/rustc/<hash> that CI produces. Remap that sysroot path to the same
/rustc/<hash> on every artifact target so the two converge.
Verified: local stage0.efi is now fully path-canonical (0 /src/.cargo, 0
/src/.rustup; only /cargo + /rustc), matching CI's build. The remap is a no-op
in CI (no rust-src there). The hash is toolchain-specific; update it when
bumping the toolchain (a stale value silently no-ops, which CI==local catches).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
@HarryRHarryR
mentioned this pull request
Jul 10, 2026
 Merged

@HarryR
HarryR
marked this pull request as ready for review
July 10, 2026 06:49
@HarryR
HarryR
merged commit 7e60a62
into
mainJul 10, 2026

3 checks passed

@HarryR
HarryR
deleted the

reproducible-builds

branch
July 10, 2026 06:51
Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers


No reviews


Assignees


No one assigned


Labels


None yet


Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

1 participant

@HarryR

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Auto-enable theater mode on YouTube\n(function() {\n function tryTheater() {\n var btn = document.querySelector('button[aria-label=\"Theater mode\"], ytd-player #player button[title=\"Theater mode\"]');\n if (btn && !btn.classList.contains('activated')) {\n btn.click();\n }\n }\n \n // Try immediately\n tryTheater();\n \n // Try after navigation (SPA)\n var lastUrl = location.href;\n setInterval(function() {\n if (location.href !== lastUrl) {\n lastUrl = location.href;\n setTimeout(tryTheater, 500);\n }\n }, 1000);\n \n // Also try on player load\n var observer = new MutationObserver(tryTheater);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "YouTube Theater Mode Default");
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
build: byte-identical CI/local builds via --remap-path-prefix - #9
Merged
HarryR merged 2 commits into
mainfrom 
reproducible-builds
Jul 10, 2026
Merged
build: byte-identical CI/local builds via --remap-path-prefix#9
HarryR merged 2 commits into
mainfrom 
reproducible-builds
Conversation
@HarryR
@HarryRHarryR
commented
Jul 9, 2026

Copy link


Copy Markdown

Contributor
What
Make CI and local builds bit-identical so the measured stage0.efi (PCR4/14) reproduces independently.
Why
CI builds with CARGO_HOME=/tmp/.cargo while local uses /src/.cargo; rustc embeds dependency source paths, so each baked different absolute registry paths into stage0.efi.
Fix
--remap-path-prefix=/src/.cargo=/cargo + =/tmp/.cargo=/cargo in every artifact-producing target (musl x2, uefi x2) -> build is CARGO_HOME-independent. Verified locally: stage0.efi contains only /cargo/registry paths (0 /src, 0 /tmp). (trim-paths would be cleaner but is nightly-only on 1.91.)
Verification
This PR's CI run builds the db-signed BOOTX64.EFI; grepping it should show only /cargo paths (no /tmp//src), proving CARGO_HOME-independence. Local reference (x86_64): stage0.efi 433bea84, ena.efi e4957fe6.
Pairs with lockboot/stage1's reproducibility PR.
🤖 Generated with Claude Code
HarryRand others
added 2 commits
July 9, 2026 19:36
@HarryR@claude
build: make CI and local builds byte-identical via --remap-path-prefix
0068abf
CI and local produced different measured binaries (stage0.efi and thus PCR4/14).
Root cause: rustc embeds dependency source paths, and CI runs with
CARGO_HOME=/tmp/.cargo (the Makefile's CI cache redirect) while local uses
/src/.cargo, baking different absolute registry paths into the binary.
Fix: --remap-path-prefix in every artifact-producing target's rustflags (musl
x2, uefi x2) rewrites both /src/.cargo and /tmp/.cargo to a fixed /cargo, so the
build no longer depends on where CARGO_HOME is. Verified: after the remap
stage0.efi contains only /cargo/registry paths (0 /src, 0 /tmp). trim-paths
would be cleaner but is still nightly-only on 1.91.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
@HarryR@claude
build: also remap the rust-src sysroot path so CI==local with rust-an…
dfae5ed
…alyzer
The CARGO_HOME remap left one divergence: when rust-src is installed (rust-
analyzer does this in the local shared rustup; CI's fresh toolchain has not),
rustc emits std panic-location paths from the sysroot instead of the baked
/rustc/<hash> that CI produces. Remap that sysroot path to the same
/rustc/<hash> on every artifact target so the two converge.
Verified: local stage0.efi is now fully path-canonical (0 /src/.cargo, 0
/src/.rustup; only /cargo + /rustc), matching CI's build. The remap is a no-op
in CI (no rust-src there). The hash is toolchain-specific; update it when
bumping the toolchain (a stale value silently no-ops, which CI==local catches).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
@HarryRHarryR
mentioned this pull request
Jul 10, 2026
 Merged

@HarryR
HarryR
marked this pull request as ready for review
July 10, 2026 06:49
@HarryR
HarryR
merged commit 7e60a62
into
mainJul 10, 2026

3 checks passed

@HarryR
HarryR
deleted the

reproducible-builds

branch
July 10, 2026 06:51
Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers


No reviews


Assignees


No one assigned


Labels


None yet


Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

1 participant

@HarryR

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Remove or un-stick sticky/fixed headers that block content\n(function() {\n function unstick() {\n document.querySelectorAll('header, nav, [role=\"banner\"], .header, .navbar, .sticky, .fixed-top, [style*=\"position: fixed\"], [style*=\"position:sticky\"]').forEach(function(el) {\n if (el.style.position === 'fixed' || el.style.position === 'sticky' || \n getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {\n el.style.position = 'static';\n el.style.top = 'auto';\n el.style.zIndex = 'auto';\n }\n });\n }\n \n unstick();\n \n var observer = new MutationObserver(unstick);\n observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });\n})();", "Kill Sticky Headers");
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
build: byte-identical CI/local builds via --remap-path-prefix - #9
Merged
HarryR merged 2 commits into
mainfrom 
reproducible-builds
Jul 10, 2026
Merged
build: byte-identical CI/local builds via --remap-path-prefix#9
HarryR merged 2 commits into
mainfrom 
reproducible-builds
Conversation
@HarryR
@HarryRHarryR
commented
Jul 9, 2026

Copy link


Copy Markdown

Contributor
What
Make CI and local builds bit-identical so the measured stage0.efi (PCR4/14) reproduces independently.
Why
CI builds with CARGO_HOME=/tmp/.cargo while local uses /src/.cargo; rustc embeds dependency source paths, so each baked different absolute registry paths into stage0.efi.
Fix
--remap-path-prefix=/src/.cargo=/cargo + =/tmp/.cargo=/cargo in every artifact-producing target (musl x2, uefi x2) -> build is CARGO_HOME-independent. Verified locally: stage0.efi contains only /cargo/registry paths (0 /src, 0 /tmp). (trim-paths would be cleaner but is nightly-only on 1.91.)
Verification
This PR's CI run builds the db-signed BOOTX64.EFI; grepping it should show only /cargo paths (no /tmp//src), proving CARGO_HOME-independence. Local reference (x86_64): stage0.efi 433bea84, ena.efi e4957fe6.
Pairs with lockboot/stage1's reproducibility PR.
🤖 Generated with Claude Code
HarryRand others
added 2 commits
July 9, 2026 19:36
@HarryR@claude
build: make CI and local builds byte-identical via --remap-path-prefix
0068abf
CI and local produced different measured binaries (stage0.efi and thus PCR4/14).
Root cause: rustc embeds dependency source paths, and CI runs with
CARGO_HOME=/tmp/.cargo (the Makefile's CI cache redirect) while local uses
/src/.cargo, baking different absolute registry paths into the binary.
Fix: --remap-path-prefix in every artifact-producing target's rustflags (musl
x2, uefi x2) rewrites both /src/.cargo and /tmp/.cargo to a fixed /cargo, so the
build no longer depends on where CARGO_HOME is. Verified: after the remap
stage0.efi contains only /cargo/registry paths (0 /src, 0 /tmp). trim-paths
would be cleaner but is still nightly-only on 1.91.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
@HarryR@claude
build: also remap the rust-src sysroot path so CI==local with rust-an…
dfae5ed
…alyzer
The CARGO_HOME remap left one divergence: when rust-src is installed (rust-
analyzer does this in the local shared rustup; CI's fresh toolchain has not),
rustc emits std panic-location paths from the sysroot instead of the baked
/rustc/<hash> that CI produces. Remap that sysroot path to the same
/rustc/<hash> on every artifact target so the two converge.
Verified: local stage0.efi is now fully path-canonical (0 /src/.cargo, 0
/src/.rustup; only /cargo + /rustc), matching CI's build. The remap is a no-op
in CI (no rust-src there). The hash is toolchain-specific; update it when
bumping the toolchain (a stale value silently no-ops, which CI==local catches).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
@HarryRHarryR
mentioned this pull request
Jul 10, 2026
 Merged

@HarryR
HarryR
marked this pull request as ready for review
July 10, 2026 06:49
@HarryR
HarryR
merged commit 7e60a62
into
mainJul 10, 2026

3 checks passed

@HarryR
HarryR
deleted the

reproducible-builds

branch
July 10, 2026 06:51
Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers


No reviews


Assignees


No one assigned


Labels


None yet


Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

1 participant

@HarryR

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Universal Dark Mode - works on any site\n(function() {\n var enabled = true;\n \n function applyDarkMode() {\n if (!enabled) return;\n \n // Create style element if it doesn't exist\n var style = document.getElementById('universal-dark-mode-style');\n if (!style) {\n style = document.createElement('style');\n style.id = 'universal-dark-mode-style';\n document.head.appendChild(style);\n }\n \n // Dark mode CSS - inverts colors but preserves images/video\n style.textContent = '\n /* Invert everything except media */\n html {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #1a1a2e !important;\n }\n \n /* Restore images, videos, iframes, canvas */\n img, video, iframe, canvas, svg, picture, [style*=\"background-image\"] {\n filter: invert(1) hue-rotate(180deg) !important;\n }\n \n /* Preserve specific elements that should not be inverted */\n .no-dark-mode, .no-dark-mode *,\n [data-theme=\"light\"], [data-theme=\"light\"],\n .ace_editor, .ace_editor *,\n .CodeMirror, .CodeMirror *,\n .monaco-editor, .monaco-editor *,\n .markdown-body pre, .markdown-body pre *,\n .highlight, .highlight *,\n pre code, pre code * {\n filter: none !important;\n }\n \n /* Fix common UI elements */\n .modal, .popup, .dropdown-menu, .tooltip, .popover {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #2d2d44 !important;\n border-color: #444 !important;\n }\n \n /* Scrollbars */\n ::-webkit-scrollbar { background: #1a1a2e !important; }\n ::-webkit-scrollbar-thumb { background: #444 !important; }\n ::-webkit-scrollbar-thumb:hover { background: #555 !important; }\n \n /* Selection */\n ::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ';\n }\n \n function removeDarkMode() {\n var style = document.getElementById('universal-dark-mode-style');\n if (style) style.remove();\n }\n \n // Toggle with Alt+Shift+D\n document.addEventListener('keydown', function(e) {\n if (e.altKey && e.shiftKey && e.key === 'D') {\n e.preventDefault();\n enabled = !enabled;\n if (enabled) {\n applyDarkMode();\n console.log('[Universal Dark Mode] Enabled');\n } else {\n removeDarkMode();\n console.log('[Universal Dark Mode] Disabled');\n }\n }\n });\n \n // Apply on load\n applyDarkMode();\n \n // Re-apply on dynamic content\n var observer = new MutationObserver(function(mutations) {\n if (enabled && !document.getElementById('universal-dark-mode-style')) {\n applyDarkMode();\n }\n });\n observer.observe(document.head, { childList: true });\n \n console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');\n})();", "Universal Dark Mode");
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content
build: byte-identical CI/local builds via --remap-path-prefix - #9
Merged
HarryR merged 2 commits into
mainfrom 
reproducible-builds
Jul 10, 2026
Merged
build: byte-identical CI/local builds via --remap-path-prefix#9
HarryR merged 2 commits into
mainfrom 
reproducible-builds
Conversation
@HarryR
@HarryRHarryR
commented
Jul 9, 2026

Copy link


Copy Markdown

Contributor
What
Make CI and local builds bit-identical so the measured stage0.efi (PCR4/14) reproduces independently.
Why
CI builds with CARGO_HOME=/tmp/.cargo while local uses /src/.cargo; rustc embeds dependency source paths, so each baked different absolute registry paths into stage0.efi.
Fix
--remap-path-prefix=/src/.cargo=/cargo + =/tmp/.cargo=/cargo in every artifact-producing target (musl x2, uefi x2) -> build is CARGO_HOME-independent. Verified locally: stage0.efi contains only /cargo/registry paths (0 /src, 0 /tmp). (trim-paths would be cleaner but is nightly-only on 1.91.)
Verification
This PR's CI run builds the db-signed BOOTX64.EFI; grepping it should show only /cargo paths (no /tmp//src), proving CARGO_HOME-independence. Local reference (x86_64): stage0.efi 433bea84, ena.efi e4957fe6.
Pairs with lockboot/stage1's reproducibility PR.
🤖 Generated with Claude Code
HarryRand others
added 2 commits
July 9, 2026 19:36
@HarryR@claude
build: make CI and local builds byte-identical via --remap-path-prefix
0068abf
CI and local produced different measured binaries (stage0.efi and thus PCR4/14).
Root cause: rustc embeds dependency source paths, and CI runs with
CARGO_HOME=/tmp/.cargo (the Makefile's CI cache redirect) while local uses
/src/.cargo, baking different absolute registry paths into the binary.
Fix: --remap-path-prefix in every artifact-producing target's rustflags (musl
x2, uefi x2) rewrites both /src/.cargo and /tmp/.cargo to a fixed /cargo, so the
build no longer depends on where CARGO_HOME is. Verified: after the remap
stage0.efi contains only /cargo/registry paths (0 /src, 0 /tmp). trim-paths
would be cleaner but is still nightly-only on 1.91.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
@HarryR@claude
build: also remap the rust-src sysroot path so CI==local with rust-an…
dfae5ed
…alyzer
The CARGO_HOME remap left one divergence: when rust-src is installed (rust-
analyzer does this in the local shared rustup; CI's fresh toolchain has not),
rustc emits std panic-location paths from the sysroot instead of the baked
/rustc/<hash> that CI produces. Remap that sysroot path to the same
/rustc/<hash> on every artifact target so the two converge.
Verified: local stage0.efi is now fully path-canonical (0 /src/.cargo, 0
/src/.rustup; only /cargo + /rustc), matching CI's build. The remap is a no-op
in CI (no rust-src there). The hash is toolchain-specific; update it when
bumping the toolchain (a stale value silently no-ops, which CI==local catches).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
@HarryRHarryR
mentioned this pull request
Jul 10, 2026
 Merged

@HarryR
HarryR
marked this pull request as ready for review
July 10, 2026 06:49
@HarryR
HarryR
merged commit 7e60a62
into
mainJul 10, 2026

3 checks passed

@HarryR
HarryR
deleted the

reproducible-builds

branch
July 10, 2026 06:51
Sign up for freeto join this conversation on GitHub.
Already have an account?
Sign in to comment

Reviewers


No reviews


Assignees


No one assigned


Labels


None yet


Projects


None yet


Milestone


No milestone


Development

Successfully merging this pull request may close these issues.

1 participant

@HarryR