BranchesTags

Repository files navigation

comfoclime

hacs_badge

HomeAssistant integration of Zehnder ComfoClime (and all devices in ComfoNet bus like the ComfoAir Q)

Features

ComfoClime is a HVAC solution as additional device for the ComfoAir Q series. It comes with its own app and an propietary JSON API. The ComfoClime unit is connected to the local network via WiFi/WLAN, the API is available only local via HTTP requests without authentication. The integration can also control the ventilation main unit ComfoAir Q. It currently offers:

  • reading the dashboard data similar to the official app
  • climate control entity with HVAC modes (heat/cool/fan_only/off) and preset modes (comfort/power/eco)
  • reading and writing the active temperature profile
  • setting the ventilation fan speed
  • autodiscovering all connected devices
  • property (r/w) and telemetry (r/o) values of all connected devices
  • restarting the ComfoClime unit via service call
  • configuration via config flow by host/ip
  • locals in english and german

Installation

  • add this repository via HACS (user defined repositories, URL: https://github.com/msfuture/comfoclime)
  • install the "Zehnder ComfoClime" integration in HACS
  • restart Home Assistant
  • add the ComfoClime device (connected devices like the ComfoAir Q are detected and added automatically)

API Documentation

API documentation with practical Python examples:

Feel free to extend!

Climate Control Features

The integration provides a comprehensive climate control entity that unifies all temperature and ventilation control features:

HVAC Modes

  • Off: System standby mode
  • Heat: Heating mode (automatically sets season to heating)
  • Cool: Cooling mode (automatically sets season to cooling)
  • Fan Only: Ventilation only mode (season set to transition)

Additionally there are controls for the fan speed of the connected ComfoAir Q device. The range goes from 0 to 3.

Preset Modes

  • Comfort: Maximum comfort temperature profile
  • Power: Power saving temperature profile
  • Eco: Energy efficient temperature profile

Temperature Control

  • Set target temperature for heating (15-25°C) and cooling (20-28°C) seasons
  • Current temperature display from indoor sensor
  • Automatic temperature range adjustment based on active season

Smart Season Detection

The climate entity automatically:

  • Detects current season from ComfoClime dashboard
  • Adjusts available temperature ranges accordingly
  • Shows appropriate HVAC actions (heating/cooling/fan/idle)
  • Manages system state based on fan activity

Caveats

With some firmware versions, the ComfoClimeAPI stops being responsive after a few days. Pressing "Reset" on the Arduino board or power cycling the device will fix it. An alternative solution is to set up an automation that restarts the ComfoNet board daily:

alias: Reset ComfoClome Dailydescription: ''triggers:
- trigger: timeat: '22:00:00'conditions: []actions:
- action: comfoclime.reset_systemmetadata: {}data: {}mode: single

For details, see #7.

Current ToDo / development

There are many more telemetry and property values, that make sense to be offered by the integration. The ComfoClime unit itself is fully integrated but there are some missing sensors, switches and numbers of the ComfoAirQ unit to be added in the future. You are missing one? The definitions are in seperate files in the entities folder, so you can try them yourself. If they are working you can open an issue or directly open a pull request.

Feel free to participate! 🙋‍♂️

Thanks to...

@michaelarnauts and his integration of ComfoConnect, where I discovered a lot of telemetries and properties of the ventilation unit: https://github.com/michaelarnauts/aiocomfoconnect

About

HomeAssistant integration of Zehnder ComfoClime

Topics

comfoclimehacshome-assistanthome-assistant-customhomeassistantintegrationzehnder

Resources

Readme
Apache-2.0 license
Activity

Stars

16 stars

Watchers

7 watching

Forks

5 forks
Report repository

Releases

Packages

Used by

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { injectUserscript("// Add copy buttons to all 
 blocks\n(function() {\n function addCopyButtons() {\n document.querySelectorAll('pre code').forEach(function(codeBlock) {\n if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;\n codeBlock.parentElement.setAttribute('data-copy-added', 'true');\n \n var btn = document.createElement('button');\n btn.textContent = 'Copy';\n btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';\n btn.onmouseover = function() { this.style.opacity = '1'; };\n btn.onmouseout = function() { this.style.opacity = '0.7'; };\n btn.onclick = function() {\n navigator.clipboard.writeText(codeBlock.textContent).then(function() {\n btn.textContent = 'Copied!';\n setTimeout(function() { btn.textContent = 'Copy'; }, 1500);\n });\n };\n codeBlock.parentElement.style.position = 'relative';\n codeBlock.parentElement.appendChild(btn);\n });\n }\n \n addCopyButtons();\n \n // Re-run on dynamic content\n var observer = new MutationObserver(addCopyButtons);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Add Copy Buttons to Code Blocks");
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content
BranchesTags
Repository files navigation
comfoclime
hacs_badge
HomeAssistant integration of Zehnder ComfoClime (and all devices in ComfoNet bus like the ComfoAir Q)
Features
ComfoClime is a HVAC solution as additional device for the ComfoAir Q series. It comes with its own app and an propietary JSON API. The ComfoClime unit is connected to the local network via WiFi/WLAN, the API is available only local via HTTP requests without authentication. The integration can also control the ventilation main unit ComfoAir Q. It currently offers:
  • reading the dashboard data similar to the official app
  • climate control entity with HVAC modes (heat/cool/fan_only/off) and preset modes (comfort/power/eco)
  • reading and writing the active temperature profile
  • setting the ventilation fan speed
  • autodiscovering all connected devices
  • property (r/w) and telemetry (r/o) values of all connected devices
  • restarting the ComfoClime unit via service call
  • configuration via config flow by host/ip
  • locals in english and german
Installation
  • add this repository via HACS (user defined repositories, URL: https://github.com/msfuture/comfoclime)
  • install the "Zehnder ComfoClime" integration in HACS
  • restart Home Assistant
  • add the ComfoClime device (connected devices like the ComfoAir Q are detected and added automatically)
API Documentation
API documentation with practical Python examples:
Feel free to extend!
Climate Control Features
The integration provides a comprehensive climate control entity that unifies all temperature and ventilation control features:
HVAC Modes
  • Off: System standby mode
  • Heat: Heating mode (automatically sets season to heating)
  • Cool: Cooling mode (automatically sets season to cooling)
  • Fan Only: Ventilation only mode (season set to transition)
Additionally there are controls for the fan speed of the connected ComfoAir Q device. The range goes from 0 to 3.
Preset Modes
  • Comfort: Maximum comfort temperature profile
  • Power: Power saving temperature profile
  • Eco: Energy efficient temperature profile
Temperature Control
  • Set target temperature for heating (15-25°C) and cooling (20-28°C) seasons
  • Current temperature display from indoor sensor
  • Automatic temperature range adjustment based on active season
Smart Season Detection
The climate entity automatically:
  • Detects current season from ComfoClime dashboard
  • Adjusts available temperature ranges accordingly
  • Shows appropriate HVAC actions (heating/cooling/fan/idle)
  • Manages system state based on fan activity
Caveats
With some firmware versions, the ComfoClimeAPI stops being responsive after a few days. Pressing "Reset" on the Arduino board or power cycling the device will fix it. An alternative solution is to set up an automation that restarts the ComfoNet board daily:
alias: Reset ComfoClome Dailydescription: ''triggers:
- trigger: timeat: '22:00:00'conditions: []actions:
- action: comfoclime.reset_systemmetadata: {}data: {}mode: single
For details, see #7.
Current ToDo / development
There are many more telemetry and property values, that make sense to be offered by the integration. The ComfoClime unit itself is fully integrated but there are some missing sensors, switches and numbers of the ComfoAirQ unit to be added in the future. You are missing one? The definitions are in seperate files in the entities folder, so you can try them yourself. If they are working you can open an issue or directly open a pull request.
Feel free to participate! 🙋‍♂️
Thanks to...
@michaelarnauts and his integration of ComfoConnect, where I discovered a lot of telemetries and properties of the ventilation unit:
https://github.com/michaelarnauts/aiocomfoconnect
About
HomeAssistant integration of Zehnder ComfoClime
Topics
comfoclimehacshome-assistanthome-assistant-customhomeassistantintegrationzehnder
Resources
Readme
Apache-2.0 license
Activity
Stars
16 stars
Watchers
7 watching
Forks
5 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Force GitHub README to respect dark mode\n(function() {\n var style = document.createElement('style');\n style.textContent = '\n .markdown-body {\n color-scheme: dark light;\n }\n .markdown-body pre { background: #161b22 !important; }\n .markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }\n .markdown-body table th, .markdown-body table td { border-color: #30363d !important; }\n .markdown-body img { background: #0d1117; }\n .markdown-body blockquote { border-left-color: #8b949e; }\n .markdown-body hr { border-color: #30363d; }\n ';\n document.head.appendChild(style);\n})();", "GitHub Dark Mode README Fix");
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
comfoclime
hacs_badge
HomeAssistant integration of Zehnder ComfoClime (and all devices in ComfoNet bus like the ComfoAir Q)
Features
ComfoClime is a HVAC solution as additional device for the ComfoAir Q series. It comes with its own app and an propietary JSON API. The ComfoClime unit is connected to the local network via WiFi/WLAN, the API is available only local via HTTP requests without authentication. The integration can also control the ventilation main unit ComfoAir Q. It currently offers:
  • reading the dashboard data similar to the official app
  • climate control entity with HVAC modes (heat/cool/fan_only/off) and preset modes (comfort/power/eco)
  • reading and writing the active temperature profile
  • setting the ventilation fan speed
  • autodiscovering all connected devices
  • property (r/w) and telemetry (r/o) values of all connected devices
  • restarting the ComfoClime unit via service call
  • configuration via config flow by host/ip
  • locals in english and german
Installation
  • add this repository via HACS (user defined repositories, URL: https://github.com/msfuture/comfoclime)
  • install the "Zehnder ComfoClime" integration in HACS
  • restart Home Assistant
  • add the ComfoClime device (connected devices like the ComfoAir Q are detected and added automatically)
API Documentation
API documentation with practical Python examples:
Feel free to extend!
Climate Control Features
The integration provides a comprehensive climate control entity that unifies all temperature and ventilation control features:
HVAC Modes
  • Off: System standby mode
  • Heat: Heating mode (automatically sets season to heating)
  • Cool: Cooling mode (automatically sets season to cooling)
  • Fan Only: Ventilation only mode (season set to transition)
Additionally there are controls for the fan speed of the connected ComfoAir Q device. The range goes from 0 to 3.
Preset Modes
  • Comfort: Maximum comfort temperature profile
  • Power: Power saving temperature profile
  • Eco: Energy efficient temperature profile
Temperature Control
  • Set target temperature for heating (15-25°C) and cooling (20-28°C) seasons
  • Current temperature display from indoor sensor
  • Automatic temperature range adjustment based on active season
Smart Season Detection
The climate entity automatically:
  • Detects current season from ComfoClime dashboard
  • Adjusts available temperature ranges accordingly
  • Shows appropriate HVAC actions (heating/cooling/fan/idle)
  • Manages system state based on fan activity
Caveats
With some firmware versions, the ComfoClimeAPI stops being responsive after a few days. Pressing "Reset" on the Arduino board or power cycling the device will fix it. An alternative solution is to set up an automation that restarts the ComfoNet board daily:
alias: Reset ComfoClome Dailydescription: ''triggers:
- trigger: timeat: '22:00:00'conditions: []actions:
- action: comfoclime.reset_systemmetadata: {}data: {}mode: single
For details, see #7.
Current ToDo / development
There are many more telemetry and property values, that make sense to be offered by the integration. The ComfoClime unit itself is fully integrated but there are some missing sensors, switches and numbers of the ComfoAirQ unit to be added in the future. You are missing one? The definitions are in seperate files in the entities folder, so you can try them yourself. If they are working you can open an issue or directly open a pull request.
Feel free to participate! 🙋‍♂️
Thanks to...
@michaelarnauts and his integration of ComfoConnect, where I discovered a lot of telemetries and properties of the ventilation unit:
https://github.com/michaelarnauts/aiocomfoconnect
About
HomeAssistant integration of Zehnder ComfoClime
Topics
comfoclimehacshome-assistanthome-assistant-customhomeassistantintegrationzehnder
Resources
Readme
Apache-2.0 license
Activity
Stars
16 stars
Watchers
7 watching
Forks
5 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Highlight search terms from Google/DuckDuckGo/Bing referrer\n(function() {\n var ref = document.referrer;\n var terms = [];\n \n if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {\n var url = new URL(ref);\n var q = url.searchParams.get('q') || url.searchParams.get('p');\n if (q) {\n terms = q.split(/\\s+/).filter(function(t) { return t.length > 2; });\n }\n }\n \n if (terms.length === 0) return;\n \n var style = document.createElement('style');\n style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';\n document.head.appendChild(style);\n \n function highlight(node) {\n if (node.nodeType === 3) { // text node\n var text = node.textContent;\n var found = false;\n terms.forEach(function(term) {\n var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\\]\\\\]/g, '\\\\') + ')', 'gi');\n if (regex.test(text)) {\n found = true;\n var frag = document.createDocumentFragment();\n var parts = text.split(regex);\n parts.forEach(function(part, i) {\n if (i % 2 === 0) {\n frag.appendChild(document.createTextNode(part));\n } else {\n var span = document.createElement('span');\n span.className = 'userscript-highlight';\n span.textContent = part;\n frag.appendChild(span);\n }\n });\n node.parentNode.replaceChild(frag, node);\n }\n });\n } else if (node.nodeType === 1 && node.childNodes) { // element\n var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];\n if (!skipTags.includes(node.tagName)) {\n Array.from(node.childNodes).forEach(highlight);\n }\n }\n }\n \n highlight(document.body);\n \n // Re-highlight on dynamic content\n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1 || node.nodeType === 3) highlight(node);\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Highlight Search Terms");
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
comfoclime
hacs_badge
HomeAssistant integration of Zehnder ComfoClime (and all devices in ComfoNet bus like the ComfoAir Q)
Features
ComfoClime is a HVAC solution as additional device for the ComfoAir Q series. It comes with its own app and an propietary JSON API. The ComfoClime unit is connected to the local network via WiFi/WLAN, the API is available only local via HTTP requests without authentication. The integration can also control the ventilation main unit ComfoAir Q. It currently offers:
  • reading the dashboard data similar to the official app
  • climate control entity with HVAC modes (heat/cool/fan_only/off) and preset modes (comfort/power/eco)
  • reading and writing the active temperature profile
  • setting the ventilation fan speed
  • autodiscovering all connected devices
  • property (r/w) and telemetry (r/o) values of all connected devices
  • restarting the ComfoClime unit via service call
  • configuration via config flow by host/ip
  • locals in english and german
Installation
  • add this repository via HACS (user defined repositories, URL: https://github.com/msfuture/comfoclime)
  • install the "Zehnder ComfoClime" integration in HACS
  • restart Home Assistant
  • add the ComfoClime device (connected devices like the ComfoAir Q are detected and added automatically)
API Documentation
API documentation with practical Python examples:
Feel free to extend!
Climate Control Features
The integration provides a comprehensive climate control entity that unifies all temperature and ventilation control features:
HVAC Modes
  • Off: System standby mode
  • Heat: Heating mode (automatically sets season to heating)
  • Cool: Cooling mode (automatically sets season to cooling)
  • Fan Only: Ventilation only mode (season set to transition)
Additionally there are controls for the fan speed of the connected ComfoAir Q device. The range goes from 0 to 3.
Preset Modes
  • Comfort: Maximum comfort temperature profile
  • Power: Power saving temperature profile
  • Eco: Energy efficient temperature profile
Temperature Control
  • Set target temperature for heating (15-25°C) and cooling (20-28°C) seasons
  • Current temperature display from indoor sensor
  • Automatic temperature range adjustment based on active season
Smart Season Detection
The climate entity automatically:
  • Detects current season from ComfoClime dashboard
  • Adjusts available temperature ranges accordingly
  • Shows appropriate HVAC actions (heating/cooling/fan/idle)
  • Manages system state based on fan activity
Caveats
With some firmware versions, the ComfoClimeAPI stops being responsive after a few days. Pressing "Reset" on the Arduino board or power cycling the device will fix it. An alternative solution is to set up an automation that restarts the ComfoNet board daily:
alias: Reset ComfoClome Dailydescription: ''triggers:
- trigger: timeat: '22:00:00'conditions: []actions:
- action: comfoclime.reset_systemmetadata: {}data: {}mode: single
For details, see #7.
Current ToDo / development
There are many more telemetry and property values, that make sense to be offered by the integration. The ComfoClime unit itself is fully integrated but there are some missing sensors, switches and numbers of the ComfoAirQ unit to be added in the future. You are missing one? The definitions are in seperate files in the entities folder, so you can try them yourself. If they are working you can open an issue or directly open a pull request.
Feel free to participate! 🙋‍♂️
Thanks to...
@michaelarnauts and his integration of ComfoConnect, where I discovered a lot of telemetries and properties of the ventilation unit:
https://github.com/michaelarnauts/aiocomfoconnect
About
HomeAssistant integration of Zehnder ComfoClime
Topics
comfoclimehacshome-assistanthome-assistant-customhomeassistantintegrationzehnder
Resources
Readme
Apache-2.0 license
Activity
Stars
16 stars
Watchers
7 watching
Forks
5 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Strip utm_, fbclid, gclid, etc. from all links on page\n(function() {\n var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',\n 'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',\n 'ref', 'ref_src', 'source', 'medium', 'campaign'];\n \n function cleanUrl(url) {\n try {\n var u = new URL(url, window.location.origin);\n var changed = false;\n trackingParams.forEach(function(p) {\n if (u.searchParams.has(p)) {\n u.searchParams.delete(p);\n changed = true;\n }\n });\n return changed ? u.toString() : url;\n } catch (e) {\n return url;\n }\n }\n \n function cleanLinks() {\n document.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n \n cleanLinks();\n \n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1) {\n if (node.tagName === 'A') cleanLinks();\n node.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Remove Tracking Parameters from Links");
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content
BranchesTags
Repository files navigation
comfoclime
hacs_badge
HomeAssistant integration of Zehnder ComfoClime (and all devices in ComfoNet bus like the ComfoAir Q)
Features
ComfoClime is a HVAC solution as additional device for the ComfoAir Q series. It comes with its own app and an propietary JSON API. The ComfoClime unit is connected to the local network via WiFi/WLAN, the API is available only local via HTTP requests without authentication. The integration can also control the ventilation main unit ComfoAir Q. It currently offers:
  • reading the dashboard data similar to the official app
  • climate control entity with HVAC modes (heat/cool/fan_only/off) and preset modes (comfort/power/eco)
  • reading and writing the active temperature profile
  • setting the ventilation fan speed
  • autodiscovering all connected devices
  • property (r/w) and telemetry (r/o) values of all connected devices
  • restarting the ComfoClime unit via service call
  • configuration via config flow by host/ip
  • locals in english and german
Installation
  • add this repository via HACS (user defined repositories, URL: https://github.com/msfuture/comfoclime)
  • install the "Zehnder ComfoClime" integration in HACS
  • restart Home Assistant
  • add the ComfoClime device (connected devices like the ComfoAir Q are detected and added automatically)
API Documentation
API documentation with practical Python examples:
Feel free to extend!
Climate Control Features
The integration provides a comprehensive climate control entity that unifies all temperature and ventilation control features:
HVAC Modes
  • Off: System standby mode
  • Heat: Heating mode (automatically sets season to heating)
  • Cool: Cooling mode (automatically sets season to cooling)
  • Fan Only: Ventilation only mode (season set to transition)
Additionally there are controls for the fan speed of the connected ComfoAir Q device. The range goes from 0 to 3.
Preset Modes
  • Comfort: Maximum comfort temperature profile
  • Power: Power saving temperature profile
  • Eco: Energy efficient temperature profile
Temperature Control
  • Set target temperature for heating (15-25°C) and cooling (20-28°C) seasons
  • Current temperature display from indoor sensor
  • Automatic temperature range adjustment based on active season
Smart Season Detection
The climate entity automatically:
  • Detects current season from ComfoClime dashboard
  • Adjusts available temperature ranges accordingly
  • Shows appropriate HVAC actions (heating/cooling/fan/idle)
  • Manages system state based on fan activity
Caveats
With some firmware versions, the ComfoClimeAPI stops being responsive after a few days. Pressing "Reset" on the Arduino board or power cycling the device will fix it. An alternative solution is to set up an automation that restarts the ComfoNet board daily:
alias: Reset ComfoClome Dailydescription: ''triggers:
- trigger: timeat: '22:00:00'conditions: []actions:
- action: comfoclime.reset_systemmetadata: {}data: {}mode: single
For details, see #7.
Current ToDo / development
There are many more telemetry and property values, that make sense to be offered by the integration. The ComfoClime unit itself is fully integrated but there are some missing sensors, switches and numbers of the ComfoAirQ unit to be added in the future. You are missing one? The definitions are in seperate files in the entities folder, so you can try them yourself. If they are working you can open an issue or directly open a pull request.
Feel free to participate! 🙋‍♂️
Thanks to...
@michaelarnauts and his integration of ComfoConnect, where I discovered a lot of telemetries and properties of the ventilation unit:
https://github.com/michaelarnauts/aiocomfoconnect
About
HomeAssistant integration of Zehnder ComfoClime
Topics
comfoclimehacshome-assistanthome-assistant-customhomeassistantintegrationzehnder
Resources
Readme
Apache-2.0 license
Activity
Stars
16 stars
Watchers
7 watching
Forks
5 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Auto-enable theater mode on YouTube\n(function() {\n function tryTheater() {\n var btn = document.querySelector('button[aria-label=\"Theater mode\"], ytd-player #player button[title=\"Theater mode\"]');\n if (btn && !btn.classList.contains('activated')) {\n btn.click();\n }\n }\n \n // Try immediately\n tryTheater();\n \n // Try after navigation (SPA)\n var lastUrl = location.href;\n setInterval(function() {\n if (location.href !== lastUrl) {\n lastUrl = location.href;\n setTimeout(tryTheater, 500);\n }\n }, 1000);\n \n // Also try on player load\n var observer = new MutationObserver(tryTheater);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "YouTube Theater Mode Default");
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
comfoclime
hacs_badge
HomeAssistant integration of Zehnder ComfoClime (and all devices in ComfoNet bus like the ComfoAir Q)
Features
ComfoClime is a HVAC solution as additional device for the ComfoAir Q series. It comes with its own app and an propietary JSON API. The ComfoClime unit is connected to the local network via WiFi/WLAN, the API is available only local via HTTP requests without authentication. The integration can also control the ventilation main unit ComfoAir Q. It currently offers:
  • reading the dashboard data similar to the official app
  • climate control entity with HVAC modes (heat/cool/fan_only/off) and preset modes (comfort/power/eco)
  • reading and writing the active temperature profile
  • setting the ventilation fan speed
  • autodiscovering all connected devices
  • property (r/w) and telemetry (r/o) values of all connected devices
  • restarting the ComfoClime unit via service call
  • configuration via config flow by host/ip
  • locals in english and german
Installation
  • add this repository via HACS (user defined repositories, URL: https://github.com/msfuture/comfoclime)
  • install the "Zehnder ComfoClime" integration in HACS
  • restart Home Assistant
  • add the ComfoClime device (connected devices like the ComfoAir Q are detected and added automatically)
API Documentation
API documentation with practical Python examples:
Feel free to extend!
Climate Control Features
The integration provides a comprehensive climate control entity that unifies all temperature and ventilation control features:
HVAC Modes
  • Off: System standby mode
  • Heat: Heating mode (automatically sets season to heating)
  • Cool: Cooling mode (automatically sets season to cooling)
  • Fan Only: Ventilation only mode (season set to transition)
Additionally there are controls for the fan speed of the connected ComfoAir Q device. The range goes from 0 to 3.
Preset Modes
  • Comfort: Maximum comfort temperature profile
  • Power: Power saving temperature profile
  • Eco: Energy efficient temperature profile
Temperature Control
  • Set target temperature for heating (15-25°C) and cooling (20-28°C) seasons
  • Current temperature display from indoor sensor
  • Automatic temperature range adjustment based on active season
Smart Season Detection
The climate entity automatically:
  • Detects current season from ComfoClime dashboard
  • Adjusts available temperature ranges accordingly
  • Shows appropriate HVAC actions (heating/cooling/fan/idle)
  • Manages system state based on fan activity
Caveats
With some firmware versions, the ComfoClimeAPI stops being responsive after a few days. Pressing "Reset" on the Arduino board or power cycling the device will fix it. An alternative solution is to set up an automation that restarts the ComfoNet board daily:
alias: Reset ComfoClome Dailydescription: ''triggers:
- trigger: timeat: '22:00:00'conditions: []actions:
- action: comfoclime.reset_systemmetadata: {}data: {}mode: single
For details, see #7.
Current ToDo / development
There are many more telemetry and property values, that make sense to be offered by the integration. The ComfoClime unit itself is fully integrated but there are some missing sensors, switches and numbers of the ComfoAirQ unit to be added in the future. You are missing one? The definitions are in seperate files in the entities folder, so you can try them yourself. If they are working you can open an issue or directly open a pull request.
Feel free to participate! 🙋‍♂️
Thanks to...
@michaelarnauts and his integration of ComfoConnect, where I discovered a lot of telemetries and properties of the ventilation unit:
https://github.com/michaelarnauts/aiocomfoconnect
About
HomeAssistant integration of Zehnder ComfoClime
Topics
comfoclimehacshome-assistanthome-assistant-customhomeassistantintegrationzehnder
Resources
Readme
Apache-2.0 license
Activity
Stars
16 stars
Watchers
7 watching
Forks
5 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Remove or un-stick sticky/fixed headers that block content\n(function() {\n function unstick() {\n document.querySelectorAll('header, nav, [role=\"banner\"], .header, .navbar, .sticky, .fixed-top, [style*=\"position: fixed\"], [style*=\"position:sticky\"]').forEach(function(el) {\n if (el.style.position === 'fixed' || el.style.position === 'sticky' || \n getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {\n el.style.position = 'static';\n el.style.top = 'auto';\n el.style.zIndex = 'auto';\n }\n });\n }\n \n unstick();\n \n var observer = new MutationObserver(unstick);\n observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });\n})();", "Kill Sticky Headers");
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
comfoclime
hacs_badge
HomeAssistant integration of Zehnder ComfoClime (and all devices in ComfoNet bus like the ComfoAir Q)
Features
ComfoClime is a HVAC solution as additional device for the ComfoAir Q series. It comes with its own app and an propietary JSON API. The ComfoClime unit is connected to the local network via WiFi/WLAN, the API is available only local via HTTP requests without authentication. The integration can also control the ventilation main unit ComfoAir Q. It currently offers:
  • reading the dashboard data similar to the official app
  • climate control entity with HVAC modes (heat/cool/fan_only/off) and preset modes (comfort/power/eco)
  • reading and writing the active temperature profile
  • setting the ventilation fan speed
  • autodiscovering all connected devices
  • property (r/w) and telemetry (r/o) values of all connected devices
  • restarting the ComfoClime unit via service call
  • configuration via config flow by host/ip
  • locals in english and german
Installation
  • add this repository via HACS (user defined repositories, URL: https://github.com/msfuture/comfoclime)
  • install the "Zehnder ComfoClime" integration in HACS
  • restart Home Assistant
  • add the ComfoClime device (connected devices like the ComfoAir Q are detected and added automatically)
API Documentation
API documentation with practical Python examples:
Feel free to extend!
Climate Control Features
The integration provides a comprehensive climate control entity that unifies all temperature and ventilation control features:
HVAC Modes
  • Off: System standby mode
  • Heat: Heating mode (automatically sets season to heating)
  • Cool: Cooling mode (automatically sets season to cooling)
  • Fan Only: Ventilation only mode (season set to transition)
Additionally there are controls for the fan speed of the connected ComfoAir Q device. The range goes from 0 to 3.
Preset Modes
  • Comfort: Maximum comfort temperature profile
  • Power: Power saving temperature profile
  • Eco: Energy efficient temperature profile
Temperature Control
  • Set target temperature for heating (15-25°C) and cooling (20-28°C) seasons
  • Current temperature display from indoor sensor
  • Automatic temperature range adjustment based on active season
Smart Season Detection
The climate entity automatically:
  • Detects current season from ComfoClime dashboard
  • Adjusts available temperature ranges accordingly
  • Shows appropriate HVAC actions (heating/cooling/fan/idle)
  • Manages system state based on fan activity
Caveats
With some firmware versions, the ComfoClimeAPI stops being responsive after a few days. Pressing "Reset" on the Arduino board or power cycling the device will fix it. An alternative solution is to set up an automation that restarts the ComfoNet board daily:
alias: Reset ComfoClome Dailydescription: ''triggers:
- trigger: timeat: '22:00:00'conditions: []actions:
- action: comfoclime.reset_systemmetadata: {}data: {}mode: single
For details, see #7.
Current ToDo / development
There are many more telemetry and property values, that make sense to be offered by the integration. The ComfoClime unit itself is fully integrated but there are some missing sensors, switches and numbers of the ComfoAirQ unit to be added in the future. You are missing one? The definitions are in seperate files in the entities folder, so you can try them yourself. If they are working you can open an issue or directly open a pull request.
Feel free to participate! 🙋‍♂️
Thanks to...
@michaelarnauts and his integration of ComfoConnect, where I discovered a lot of telemetries and properties of the ventilation unit:
https://github.com/michaelarnauts/aiocomfoconnect
About
HomeAssistant integration of Zehnder ComfoClime
Topics
comfoclimehacshome-assistanthome-assistant-customhomeassistantintegrationzehnder
Resources
Readme
Apache-2.0 license
Activity
Stars
16 stars
Watchers
7 watching
Forks
5 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Universal Dark Mode - works on any site\n(function() {\n var enabled = true;\n \n function applyDarkMode() {\n if (!enabled) return;\n \n // Create style element if it doesn't exist\n var style = document.getElementById('universal-dark-mode-style');\n if (!style) {\n style = document.createElement('style');\n style.id = 'universal-dark-mode-style';\n document.head.appendChild(style);\n }\n \n // Dark mode CSS - inverts colors but preserves images/video\n style.textContent = '\n /* Invert everything except media */\n html {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #1a1a2e !important;\n }\n \n /* Restore images, videos, iframes, canvas */\n img, video, iframe, canvas, svg, picture, [style*=\"background-image\"] {\n filter: invert(1) hue-rotate(180deg) !important;\n }\n \n /* Preserve specific elements that should not be inverted */\n .no-dark-mode, .no-dark-mode *,\n [data-theme=\"light\"], [data-theme=\"light\"],\n .ace_editor, .ace_editor *,\n .CodeMirror, .CodeMirror *,\n .monaco-editor, .monaco-editor *,\n .markdown-body pre, .markdown-body pre *,\n .highlight, .highlight *,\n pre code, pre code * {\n filter: none !important;\n }\n \n /* Fix common UI elements */\n .modal, .popup, .dropdown-menu, .tooltip, .popover {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #2d2d44 !important;\n border-color: #444 !important;\n }\n \n /* Scrollbars */\n ::-webkit-scrollbar { background: #1a1a2e !important; }\n ::-webkit-scrollbar-thumb { background: #444 !important; }\n ::-webkit-scrollbar-thumb:hover { background: #555 !important; }\n \n /* Selection */\n ::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ';\n }\n \n function removeDarkMode() {\n var style = document.getElementById('universal-dark-mode-style');\n if (style) style.remove();\n }\n \n // Toggle with Alt+Shift+D\n document.addEventListener('keydown', function(e) {\n if (e.altKey && e.shiftKey && e.key === 'D') {\n e.preventDefault();\n enabled = !enabled;\n if (enabled) {\n applyDarkMode();\n console.log('[Universal Dark Mode] Enabled');\n } else {\n removeDarkMode();\n console.log('[Universal Dark Mode] Disabled');\n }\n }\n });\n \n // Apply on load\n applyDarkMode();\n \n // Re-apply on dynamic content\n var observer = new MutationObserver(function(mutations) {\n if (enabled && !document.getElementById('universal-dark-mode-style')) {\n applyDarkMode();\n }\n });\n observer.observe(document.head, { childList: true });\n \n console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');\n})();", "Universal Dark Mode");
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content
BranchesTags
Repository files navigation
comfoclime
hacs_badge
HomeAssistant integration of Zehnder ComfoClime (and all devices in ComfoNet bus like the ComfoAir Q)
Features
ComfoClime is a HVAC solution as additional device for the ComfoAir Q series. It comes with its own app and an propietary JSON API. The ComfoClime unit is connected to the local network via WiFi/WLAN, the API is available only local via HTTP requests without authentication. The integration can also control the ventilation main unit ComfoAir Q. It currently offers:
  • reading the dashboard data similar to the official app
  • climate control entity with HVAC modes (heat/cool/fan_only/off) and preset modes (comfort/power/eco)
  • reading and writing the active temperature profile
  • setting the ventilation fan speed
  • autodiscovering all connected devices
  • property (r/w) and telemetry (r/o) values of all connected devices
  • restarting the ComfoClime unit via service call
  • configuration via config flow by host/ip
  • locals in english and german
Installation
  • add this repository via HACS (user defined repositories, URL: https://github.com/msfuture/comfoclime)
  • install the "Zehnder ComfoClime" integration in HACS
  • restart Home Assistant
  • add the ComfoClime device (connected devices like the ComfoAir Q are detected and added automatically)
API Documentation
API documentation with practical Python examples:
Feel free to extend!
Climate Control Features
The integration provides a comprehensive climate control entity that unifies all temperature and ventilation control features:
HVAC Modes
  • Off: System standby mode
  • Heat: Heating mode (automatically sets season to heating)
  • Cool: Cooling mode (automatically sets season to cooling)
  • Fan Only: Ventilation only mode (season set to transition)
Additionally there are controls for the fan speed of the connected ComfoAir Q device. The range goes from 0 to 3.
Preset Modes
  • Comfort: Maximum comfort temperature profile
  • Power: Power saving temperature profile
  • Eco: Energy efficient temperature profile
Temperature Control
  • Set target temperature for heating (15-25°C) and cooling (20-28°C) seasons
  • Current temperature display from indoor sensor
  • Automatic temperature range adjustment based on active season
Smart Season Detection
The climate entity automatically:
  • Detects current season from ComfoClime dashboard
  • Adjusts available temperature ranges accordingly
  • Shows appropriate HVAC actions (heating/cooling/fan/idle)
  • Manages system state based on fan activity
Caveats
With some firmware versions, the ComfoClimeAPI stops being responsive after a few days. Pressing "Reset" on the Arduino board or power cycling the device will fix it. An alternative solution is to set up an automation that restarts the ComfoNet board daily:
alias: Reset ComfoClome Dailydescription: ''triggers:
- trigger: timeat: '22:00:00'conditions: []actions:
- action: comfoclime.reset_systemmetadata: {}data: {}mode: single
For details, see #7.
Current ToDo / development
There are many more telemetry and property values, that make sense to be offered by the integration. The ComfoClime unit itself is fully integrated but there are some missing sensors, switches and numbers of the ComfoAirQ unit to be added in the future. You are missing one? The definitions are in seperate files in the entities folder, so you can try them yourself. If they are working you can open an issue or directly open a pull request.
Feel free to participate! 🙋‍♂️
Thanks to...
@michaelarnauts and his integration of ComfoConnect, where I discovered a lot of telemetries and properties of the ventilation unit:
https://github.com/michaelarnauts/aiocomfoconnect
About
HomeAssistant integration of Zehnder ComfoClime
Topics
comfoclimehacshome-assistanthome-assistant-customhomeassistantintegrationzehnder
Resources
Readme
Apache-2.0 license
Activity
Stars
16 stars
Watchers
7 watching
Forks
5 forks
Report repository
Releases
Packages
Used by
Contributors
Languages