BranchesTags

Repository files navigation

boot-http

Fork notes

This is an experimental fork of boot-http. You probably want the real deal over at https://github.com/pandeiro/boot-http.

Description

A simple HTTP serve task for use with the boot build tool that can serve resources, directories or a typical ring handler.

[pandeiro/boot-http "0.8.0-SNAPSHOT"]

Usage

(The following examples assume you have boot installed and updated.)

Command line, no setup

This serves the current directory at port 3000:

boot -d pandeiro/boot-http serve -d .wait

To inspect the meanings of the flags and other tasks, use boot's built-in documentation mechanism:

boot -d pandeiro/boot-http -h # show all tasks on the classpath
boot -d pandeiro/boot-http serve -h # show serve's usage

Within a project

If you already have a build.boot, add pandeiro/boot-http to :dependencies and (require '[pandeiro.boot-http :refer :all]).

You can use boot-http for three different use cases:

1. Serve classpath resources

boot serve wait# or from REPL: (boot (serve) (wait))

2. Serve files on chosen directory

boot serve -d target wait# or at the REPL: (boot (serve :dir "target") (wait))

That would serve the target directory if it exists. Instead of specifying a directory, you can also specify a ring handler:

3. Start server with given Ring handler

boot serve -H myapp.server/app -R wait# (boot (serve :handler 'myapp.server/app :reload true) (wait))

Composability

You may have noticed the wait task being used after all the command-line invocations so far. This is because by itself, the serve task does not block and thus exits immediately.

What good is that? It means you can compose with other tasks.

In boot-cljs-example, for example, serve is invoked like so:

boot serve watch speak reload cljs-repl cljs -usO none

which is, again, the same as:

(comp (serve)
(watch)
(speak)
(reload)
(cljs-repl)
(cljs:optimizations:none))

In that case, since serve is given a directory, it serves the directory and whatever resources can be found on the classpath, and then gets out of the way.

Other options

-p / --port

Use a specific port.

boot -d pandeiro/boot-http serve -d . -p 8888 wait

-S / --server

Use a webserver other than Jetty. Supported values are :httpkit or :aleph

boot -d pandeiro/boot-http serve -d . -S :aleph wait# uses Aleph

-n / --nrepl (Added in 0.7.0-SNAPSHOT release)

Start an nREPL server for access to the http server. Accepts :port and :bind options for setting nREPL server IP and port.

boot -d pandeiro/boot-http serve -d . -n "{:port 3001}"

-i / --init and -c / --cleanup

Setup and teardown functions to run.

-s / --silent

Silences all output.

-R / --reload

Wrap provided ring handler with ring-reload.

API and Roadmap

Right now that is about it. It basically blends the functionality of python3 -m http.server and a subset of lein ring server.

Feel free to add issues or comment here if you have any ideas.

Acknowledgements

The boot guys basically wrote all of this or walked me through any parts I had to change. Thanks!

License

Copyright © 2015 Murphy McMahon

Distributed under the Eclipse Public License either version 1.0 or (at your option) any later version.

About

A simple HTTP serve task for the Boot build tool

Resources

Readme
Activity

Stars

0 stars

Watchers

0 watching

Forks

0 forks
Report repository

Releases

Packages

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { injectUserscript("// Add copy buttons to all 
 blocks\n(function() {\n function addCopyButtons() {\n document.querySelectorAll('pre code').forEach(function(codeBlock) {\n if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;\n codeBlock.parentElement.setAttribute('data-copy-added', 'true');\n \n var btn = document.createElement('button');\n btn.textContent = 'Copy';\n btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';\n btn.onmouseover = function() { this.style.opacity = '1'; };\n btn.onmouseout = function() { this.style.opacity = '0.7'; };\n btn.onclick = function() {\n navigator.clipboard.writeText(codeBlock.textContent).then(function() {\n btn.textContent = 'Copied!';\n setTimeout(function() { btn.textContent = 'Copy'; }, 1500);\n });\n };\n codeBlock.parentElement.style.position = 'relative';\n codeBlock.parentElement.appendChild(btn);\n });\n }\n \n addCopyButtons();\n \n // Re-run on dynamic content\n var observer = new MutationObserver(addCopyButtons);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Add Copy Buttons to Code Blocks");
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content
BranchesTags
Repository files navigation
boot-http
Fork notes
This is an experimental fork of boot-http. You probably want the real deal over at https://github.com/pandeiro/boot-http.
Description
A simple HTTP serve task for use with the boot build tool
that can serve resources, directories or a typical ring handler.
[pandeiro/boot-http "0.8.0-SNAPSHOT"]
Usage
(The following examples assume you have boot installed and updated.)
Command line, no setup
This serves the current directory at port 3000:
boot -d pandeiro/boot-http serve -d .wait
To inspect the meanings of the flags and other tasks, use boot's built-in
documentation mechanism:
boot -d pandeiro/boot-http -h # show all tasks on the classpath
boot -d pandeiro/boot-http serve -h # show serve's usage
Within a project
If you already have a build.boot, add
pandeiro/boot-http to :dependencies
and (require '[pandeiro.boot-http :refer :all]).
You can use boot-http for three different use cases:
1. Serve classpath resources
boot serve wait# or from REPL: (boot (serve) (wait))
2. Serve files on chosen directory
boot serve -d target wait# or at the REPL: (boot (serve :dir "target") (wait))
That would serve the target directory if it exists. Instead of specifying a directory,
you can also specify a ring handler:
3. Start server with given Ring handler
boot serve -H myapp.server/app -R wait# (boot (serve :handler 'myapp.server/app :reload true) (wait))
Composability
You may have noticed the wait task being used after all the
command-line invocations so far. This is because by itself, the
serve task does not block and thus exits immediately.
What good is that? It means you can compose with other tasks.
In boot-cljs-example, for example, serve is
invoked like so:
boot serve watch speak reload cljs-repl cljs -usO none
which is, again, the same as:
(comp (serve)
(watch)
(speak)
(reload)
(cljs-repl)
(cljs:optimizations:none))
In that case, since serve is given a directory, it serves the directory and whatever
resources can be found on the classpath, and then gets out of the way.
Other options
-p / --port
Use a specific port.
boot -d pandeiro/boot-http serve -d . -p 8888 wait
-S / --server
Use a webserver other than Jetty.
Supported values are :httpkit or :aleph
boot -d pandeiro/boot-http serve -d . -S :aleph wait# uses Aleph
-n / --nrepl (Added in 0.7.0-SNAPSHOT release)
Start an nREPL server for access to the http server. Accepts
:port and :bind options for setting nREPL server IP
and port.
boot -d pandeiro/boot-http serve -d . -n "{:port 3001}"
-i / --init and -c / --cleanup
Setup and teardown functions to run.
-s / --silent
Silences all output.
-R / --reload
Wrap provided ring handler with ring-reload.
API and Roadmap
Right now that is about it. It basically blends the functionality of
python3 -m http.server and a subset of lein ring server.
Feel free to add issues or comment here if
you have any ideas.
Acknowledgements
The boot guys basically wrote all of this or walked me through any
parts I had to change. Thanks!
License
Copyright © 2015 Murphy McMahon
Distributed under the Eclipse Public License either version 1.0 or (at
your option) any later version.
About
A simple HTTP serve task for the Boot build tool
Resources
Readme
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Force GitHub README to respect dark mode\n(function() {\n var style = document.createElement('style');\n style.textContent = '\n .markdown-body {\n color-scheme: dark light;\n }\n .markdown-body pre { background: #161b22 !important; }\n .markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }\n .markdown-body table th, .markdown-body table td { border-color: #30363d !important; }\n .markdown-body img { background: #0d1117; }\n .markdown-body blockquote { border-left-color: #8b949e; }\n .markdown-body hr { border-color: #30363d; }\n ';\n document.head.appendChild(style);\n})();", "GitHub Dark Mode README Fix");
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
boot-http
Fork notes
This is an experimental fork of boot-http. You probably want the real deal over at https://github.com/pandeiro/boot-http.
Description
A simple HTTP serve task for use with the boot build tool
that can serve resources, directories or a typical ring handler.
[pandeiro/boot-http "0.8.0-SNAPSHOT"]
Usage
(The following examples assume you have boot installed and updated.)
Command line, no setup
This serves the current directory at port 3000:
boot -d pandeiro/boot-http serve -d .wait
To inspect the meanings of the flags and other tasks, use boot's built-in
documentation mechanism:
boot -d pandeiro/boot-http -h # show all tasks on the classpath
boot -d pandeiro/boot-http serve -h # show serve's usage
Within a project
If you already have a build.boot, add
pandeiro/boot-http to :dependencies
and (require '[pandeiro.boot-http :refer :all]).
You can use boot-http for three different use cases:
1. Serve classpath resources
boot serve wait# or from REPL: (boot (serve) (wait))
2. Serve files on chosen directory
boot serve -d target wait# or at the REPL: (boot (serve :dir "target") (wait))
That would serve the target directory if it exists. Instead of specifying a directory,
you can also specify a ring handler:
3. Start server with given Ring handler
boot serve -H myapp.server/app -R wait# (boot (serve :handler 'myapp.server/app :reload true) (wait))
Composability
You may have noticed the wait task being used after all the
command-line invocations so far. This is because by itself, the
serve task does not block and thus exits immediately.
What good is that? It means you can compose with other tasks.
In boot-cljs-example, for example, serve is
invoked like so:
boot serve watch speak reload cljs-repl cljs -usO none
which is, again, the same as:
(comp (serve)
(watch)
(speak)
(reload)
(cljs-repl)
(cljs:optimizations:none))
In that case, since serve is given a directory, it serves the directory and whatever
resources can be found on the classpath, and then gets out of the way.
Other options
-p / --port
Use a specific port.
boot -d pandeiro/boot-http serve -d . -p 8888 wait
-S / --server
Use a webserver other than Jetty.
Supported values are :httpkit or :aleph
boot -d pandeiro/boot-http serve -d . -S :aleph wait# uses Aleph
-n / --nrepl (Added in 0.7.0-SNAPSHOT release)
Start an nREPL server for access to the http server. Accepts
:port and :bind options for setting nREPL server IP
and port.
boot -d pandeiro/boot-http serve -d . -n "{:port 3001}"
-i / --init and -c / --cleanup
Setup and teardown functions to run.
-s / --silent
Silences all output.
-R / --reload
Wrap provided ring handler with ring-reload.
API and Roadmap
Right now that is about it. It basically blends the functionality of
python3 -m http.server and a subset of lein ring server.
Feel free to add issues or comment here if
you have any ideas.
Acknowledgements
The boot guys basically wrote all of this or walked me through any
parts I had to change. Thanks!
License
Copyright © 2015 Murphy McMahon
Distributed under the Eclipse Public License either version 1.0 or (at
your option) any later version.
About
A simple HTTP serve task for the Boot build tool
Resources
Readme
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Highlight search terms from Google/DuckDuckGo/Bing referrer\n(function() {\n var ref = document.referrer;\n var terms = [];\n \n if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {\n var url = new URL(ref);\n var q = url.searchParams.get('q') || url.searchParams.get('p');\n if (q) {\n terms = q.split(/\\s+/).filter(function(t) { return t.length > 2; });\n }\n }\n \n if (terms.length === 0) return;\n \n var style = document.createElement('style');\n style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';\n document.head.appendChild(style);\n \n function highlight(node) {\n if (node.nodeType === 3) { // text node\n var text = node.textContent;\n var found = false;\n terms.forEach(function(term) {\n var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\\]\\\\]/g, '\\\\') + ')', 'gi');\n if (regex.test(text)) {\n found = true;\n var frag = document.createDocumentFragment();\n var parts = text.split(regex);\n parts.forEach(function(part, i) {\n if (i % 2 === 0) {\n frag.appendChild(document.createTextNode(part));\n } else {\n var span = document.createElement('span');\n span.className = 'userscript-highlight';\n span.textContent = part;\n frag.appendChild(span);\n }\n });\n node.parentNode.replaceChild(frag, node);\n }\n });\n } else if (node.nodeType === 1 && node.childNodes) { // element\n var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];\n if (!skipTags.includes(node.tagName)) {\n Array.from(node.childNodes).forEach(highlight);\n }\n }\n }\n \n highlight(document.body);\n \n // Re-highlight on dynamic content\n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1 || node.nodeType === 3) highlight(node);\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Highlight Search Terms");
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
boot-http
Fork notes
This is an experimental fork of boot-http. You probably want the real deal over at https://github.com/pandeiro/boot-http.
Description
A simple HTTP serve task for use with the boot build tool
that can serve resources, directories or a typical ring handler.
[pandeiro/boot-http "0.8.0-SNAPSHOT"]
Usage
(The following examples assume you have boot installed and updated.)
Command line, no setup
This serves the current directory at port 3000:
boot -d pandeiro/boot-http serve -d .wait
To inspect the meanings of the flags and other tasks, use boot's built-in
documentation mechanism:
boot -d pandeiro/boot-http -h # show all tasks on the classpath
boot -d pandeiro/boot-http serve -h # show serve's usage
Within a project
If you already have a build.boot, add
pandeiro/boot-http to :dependencies
and (require '[pandeiro.boot-http :refer :all]).
You can use boot-http for three different use cases:
1. Serve classpath resources
boot serve wait# or from REPL: (boot (serve) (wait))
2. Serve files on chosen directory
boot serve -d target wait# or at the REPL: (boot (serve :dir "target") (wait))
That would serve the target directory if it exists. Instead of specifying a directory,
you can also specify a ring handler:
3. Start server with given Ring handler
boot serve -H myapp.server/app -R wait# (boot (serve :handler 'myapp.server/app :reload true) (wait))
Composability
You may have noticed the wait task being used after all the
command-line invocations so far. This is because by itself, the
serve task does not block and thus exits immediately.
What good is that? It means you can compose with other tasks.
In boot-cljs-example, for example, serve is
invoked like so:
boot serve watch speak reload cljs-repl cljs -usO none
which is, again, the same as:
(comp (serve)
(watch)
(speak)
(reload)
(cljs-repl)
(cljs:optimizations:none))
In that case, since serve is given a directory, it serves the directory and whatever
resources can be found on the classpath, and then gets out of the way.
Other options
-p / --port
Use a specific port.
boot -d pandeiro/boot-http serve -d . -p 8888 wait
-S / --server
Use a webserver other than Jetty.
Supported values are :httpkit or :aleph
boot -d pandeiro/boot-http serve -d . -S :aleph wait# uses Aleph
-n / --nrepl (Added in 0.7.0-SNAPSHOT release)
Start an nREPL server for access to the http server. Accepts
:port and :bind options for setting nREPL server IP
and port.
boot -d pandeiro/boot-http serve -d . -n "{:port 3001}"
-i / --init and -c / --cleanup
Setup and teardown functions to run.
-s / --silent
Silences all output.
-R / --reload
Wrap provided ring handler with ring-reload.
API and Roadmap
Right now that is about it. It basically blends the functionality of
python3 -m http.server and a subset of lein ring server.
Feel free to add issues or comment here if
you have any ideas.
Acknowledgements
The boot guys basically wrote all of this or walked me through any
parts I had to change. Thanks!
License
Copyright © 2015 Murphy McMahon
Distributed under the Eclipse Public License either version 1.0 or (at
your option) any later version.
About
A simple HTTP serve task for the Boot build tool
Resources
Readme
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Strip utm_, fbclid, gclid, etc. from all links on page\n(function() {\n var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',\n 'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',\n 'ref', 'ref_src', 'source', 'medium', 'campaign'];\n \n function cleanUrl(url) {\n try {\n var u = new URL(url, window.location.origin);\n var changed = false;\n trackingParams.forEach(function(p) {\n if (u.searchParams.has(p)) {\n u.searchParams.delete(p);\n changed = true;\n }\n });\n return changed ? u.toString() : url;\n } catch (e) {\n return url;\n }\n }\n \n function cleanLinks() {\n document.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n \n cleanLinks();\n \n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1) {\n if (node.tagName === 'A') cleanLinks();\n node.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Remove Tracking Parameters from Links");
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content
BranchesTags
Repository files navigation
boot-http
Fork notes
This is an experimental fork of boot-http. You probably want the real deal over at https://github.com/pandeiro/boot-http.
Description
A simple HTTP serve task for use with the boot build tool
that can serve resources, directories or a typical ring handler.
[pandeiro/boot-http "0.8.0-SNAPSHOT"]
Usage
(The following examples assume you have boot installed and updated.)
Command line, no setup
This serves the current directory at port 3000:
boot -d pandeiro/boot-http serve -d .wait
To inspect the meanings of the flags and other tasks, use boot's built-in
documentation mechanism:
boot -d pandeiro/boot-http -h # show all tasks on the classpath
boot -d pandeiro/boot-http serve -h # show serve's usage
Within a project
If you already have a build.boot, add
pandeiro/boot-http to :dependencies
and (require '[pandeiro.boot-http :refer :all]).
You can use boot-http for three different use cases:
1. Serve classpath resources
boot serve wait# or from REPL: (boot (serve) (wait))
2. Serve files on chosen directory
boot serve -d target wait# or at the REPL: (boot (serve :dir "target") (wait))
That would serve the target directory if it exists. Instead of specifying a directory,
you can also specify a ring handler:
3. Start server with given Ring handler
boot serve -H myapp.server/app -R wait# (boot (serve :handler 'myapp.server/app :reload true) (wait))
Composability
You may have noticed the wait task being used after all the
command-line invocations so far. This is because by itself, the
serve task does not block and thus exits immediately.
What good is that? It means you can compose with other tasks.
In boot-cljs-example, for example, serve is
invoked like so:
boot serve watch speak reload cljs-repl cljs -usO none
which is, again, the same as:
(comp (serve)
(watch)
(speak)
(reload)
(cljs-repl)
(cljs:optimizations:none))
In that case, since serve is given a directory, it serves the directory and whatever
resources can be found on the classpath, and then gets out of the way.
Other options
-p / --port
Use a specific port.
boot -d pandeiro/boot-http serve -d . -p 8888 wait
-S / --server
Use a webserver other than Jetty.
Supported values are :httpkit or :aleph
boot -d pandeiro/boot-http serve -d . -S :aleph wait# uses Aleph
-n / --nrepl (Added in 0.7.0-SNAPSHOT release)
Start an nREPL server for access to the http server. Accepts
:port and :bind options for setting nREPL server IP
and port.
boot -d pandeiro/boot-http serve -d . -n "{:port 3001}"
-i / --init and -c / --cleanup
Setup and teardown functions to run.
-s / --silent
Silences all output.
-R / --reload
Wrap provided ring handler with ring-reload.
API and Roadmap
Right now that is about it. It basically blends the functionality of
python3 -m http.server and a subset of lein ring server.
Feel free to add issues or comment here if
you have any ideas.
Acknowledgements
The boot guys basically wrote all of this or walked me through any
parts I had to change. Thanks!
License
Copyright © 2015 Murphy McMahon
Distributed under the Eclipse Public License either version 1.0 or (at
your option) any later version.
About
A simple HTTP serve task for the Boot build tool
Resources
Readme
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Auto-enable theater mode on YouTube\n(function() {\n function tryTheater() {\n var btn = document.querySelector('button[aria-label=\"Theater mode\"], ytd-player #player button[title=\"Theater mode\"]');\n if (btn && !btn.classList.contains('activated')) {\n btn.click();\n }\n }\n \n // Try immediately\n tryTheater();\n \n // Try after navigation (SPA)\n var lastUrl = location.href;\n setInterval(function() {\n if (location.href !== lastUrl) {\n lastUrl = location.href;\n setTimeout(tryTheater, 500);\n }\n }, 1000);\n \n // Also try on player load\n var observer = new MutationObserver(tryTheater);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "YouTube Theater Mode Default");
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
boot-http
Fork notes
This is an experimental fork of boot-http. You probably want the real deal over at https://github.com/pandeiro/boot-http.
Description
A simple HTTP serve task for use with the boot build tool
that can serve resources, directories or a typical ring handler.
[pandeiro/boot-http "0.8.0-SNAPSHOT"]
Usage
(The following examples assume you have boot installed and updated.)
Command line, no setup
This serves the current directory at port 3000:
boot -d pandeiro/boot-http serve -d .wait
To inspect the meanings of the flags and other tasks, use boot's built-in
documentation mechanism:
boot -d pandeiro/boot-http -h # show all tasks on the classpath
boot -d pandeiro/boot-http serve -h # show serve's usage
Within a project
If you already have a build.boot, add
pandeiro/boot-http to :dependencies
and (require '[pandeiro.boot-http :refer :all]).
You can use boot-http for three different use cases:
1. Serve classpath resources
boot serve wait# or from REPL: (boot (serve) (wait))
2. Serve files on chosen directory
boot serve -d target wait# or at the REPL: (boot (serve :dir "target") (wait))
That would serve the target directory if it exists. Instead of specifying a directory,
you can also specify a ring handler:
3. Start server with given Ring handler
boot serve -H myapp.server/app -R wait# (boot (serve :handler 'myapp.server/app :reload true) (wait))
Composability
You may have noticed the wait task being used after all the
command-line invocations so far. This is because by itself, the
serve task does not block and thus exits immediately.
What good is that? It means you can compose with other tasks.
In boot-cljs-example, for example, serve is
invoked like so:
boot serve watch speak reload cljs-repl cljs -usO none
which is, again, the same as:
(comp (serve)
(watch)
(speak)
(reload)
(cljs-repl)
(cljs:optimizations:none))
In that case, since serve is given a directory, it serves the directory and whatever
resources can be found on the classpath, and then gets out of the way.
Other options
-p / --port
Use a specific port.
boot -d pandeiro/boot-http serve -d . -p 8888 wait
-S / --server
Use a webserver other than Jetty.
Supported values are :httpkit or :aleph
boot -d pandeiro/boot-http serve -d . -S :aleph wait# uses Aleph
-n / --nrepl (Added in 0.7.0-SNAPSHOT release)
Start an nREPL server for access to the http server. Accepts
:port and :bind options for setting nREPL server IP
and port.
boot -d pandeiro/boot-http serve -d . -n "{:port 3001}"
-i / --init and -c / --cleanup
Setup and teardown functions to run.
-s / --silent
Silences all output.
-R / --reload
Wrap provided ring handler with ring-reload.
API and Roadmap
Right now that is about it. It basically blends the functionality of
python3 -m http.server and a subset of lein ring server.
Feel free to add issues or comment here if
you have any ideas.
Acknowledgements
The boot guys basically wrote all of this or walked me through any
parts I had to change. Thanks!
License
Copyright © 2015 Murphy McMahon
Distributed under the Eclipse Public License either version 1.0 or (at
your option) any later version.
About
A simple HTTP serve task for the Boot build tool
Resources
Readme
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Remove or un-stick sticky/fixed headers that block content\n(function() {\n function unstick() {\n document.querySelectorAll('header, nav, [role=\"banner\"], .header, .navbar, .sticky, .fixed-top, [style*=\"position: fixed\"], [style*=\"position:sticky\"]').forEach(function(el) {\n if (el.style.position === 'fixed' || el.style.position === 'sticky' || \n getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {\n el.style.position = 'static';\n el.style.top = 'auto';\n el.style.zIndex = 'auto';\n }\n });\n }\n \n unstick();\n \n var observer = new MutationObserver(unstick);\n observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });\n})();", "Kill Sticky Headers");
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
boot-http
Fork notes
This is an experimental fork of boot-http. You probably want the real deal over at https://github.com/pandeiro/boot-http.
Description
A simple HTTP serve task for use with the boot build tool
that can serve resources, directories or a typical ring handler.
[pandeiro/boot-http "0.8.0-SNAPSHOT"]
Usage
(The following examples assume you have boot installed and updated.)
Command line, no setup
This serves the current directory at port 3000:
boot -d pandeiro/boot-http serve -d .wait
To inspect the meanings of the flags and other tasks, use boot's built-in
documentation mechanism:
boot -d pandeiro/boot-http -h # show all tasks on the classpath
boot -d pandeiro/boot-http serve -h # show serve's usage
Within a project
If you already have a build.boot, add
pandeiro/boot-http to :dependencies
and (require '[pandeiro.boot-http :refer :all]).
You can use boot-http for three different use cases:
1. Serve classpath resources
boot serve wait# or from REPL: (boot (serve) (wait))
2. Serve files on chosen directory
boot serve -d target wait# or at the REPL: (boot (serve :dir "target") (wait))
That would serve the target directory if it exists. Instead of specifying a directory,
you can also specify a ring handler:
3. Start server with given Ring handler
boot serve -H myapp.server/app -R wait# (boot (serve :handler 'myapp.server/app :reload true) (wait))
Composability
You may have noticed the wait task being used after all the
command-line invocations so far. This is because by itself, the
serve task does not block and thus exits immediately.
What good is that? It means you can compose with other tasks.
In boot-cljs-example, for example, serve is
invoked like so:
boot serve watch speak reload cljs-repl cljs -usO none
which is, again, the same as:
(comp (serve)
(watch)
(speak)
(reload)
(cljs-repl)
(cljs:optimizations:none))
In that case, since serve is given a directory, it serves the directory and whatever
resources can be found on the classpath, and then gets out of the way.
Other options
-p / --port
Use a specific port.
boot -d pandeiro/boot-http serve -d . -p 8888 wait
-S / --server
Use a webserver other than Jetty.
Supported values are :httpkit or :aleph
boot -d pandeiro/boot-http serve -d . -S :aleph wait# uses Aleph
-n / --nrepl (Added in 0.7.0-SNAPSHOT release)
Start an nREPL server for access to the http server. Accepts
:port and :bind options for setting nREPL server IP
and port.
boot -d pandeiro/boot-http serve -d . -n "{:port 3001}"
-i / --init and -c / --cleanup
Setup and teardown functions to run.
-s / --silent
Silences all output.
-R / --reload
Wrap provided ring handler with ring-reload.
API and Roadmap
Right now that is about it. It basically blends the functionality of
python3 -m http.server and a subset of lein ring server.
Feel free to add issues or comment here if
you have any ideas.
Acknowledgements
The boot guys basically wrote all of this or walked me through any
parts I had to change. Thanks!
License
Copyright © 2015 Murphy McMahon
Distributed under the Eclipse Public License either version 1.0 or (at
your option) any later version.
About
A simple HTTP serve task for the Boot build tool
Resources
Readme
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Universal Dark Mode - works on any site\n(function() {\n var enabled = true;\n \n function applyDarkMode() {\n if (!enabled) return;\n \n // Create style element if it doesn't exist\n var style = document.getElementById('universal-dark-mode-style');\n if (!style) {\n style = document.createElement('style');\n style.id = 'universal-dark-mode-style';\n document.head.appendChild(style);\n }\n \n // Dark mode CSS - inverts colors but preserves images/video\n style.textContent = '\n /* Invert everything except media */\n html {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #1a1a2e !important;\n }\n \n /* Restore images, videos, iframes, canvas */\n img, video, iframe, canvas, svg, picture, [style*=\"background-image\"] {\n filter: invert(1) hue-rotate(180deg) !important;\n }\n \n /* Preserve specific elements that should not be inverted */\n .no-dark-mode, .no-dark-mode *,\n [data-theme=\"light\"], [data-theme=\"light\"],\n .ace_editor, .ace_editor *,\n .CodeMirror, .CodeMirror *,\n .monaco-editor, .monaco-editor *,\n .markdown-body pre, .markdown-body pre *,\n .highlight, .highlight *,\n pre code, pre code * {\n filter: none !important;\n }\n \n /* Fix common UI elements */\n .modal, .popup, .dropdown-menu, .tooltip, .popover {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #2d2d44 !important;\n border-color: #444 !important;\n }\n \n /* Scrollbars */\n ::-webkit-scrollbar { background: #1a1a2e !important; }\n ::-webkit-scrollbar-thumb { background: #444 !important; }\n ::-webkit-scrollbar-thumb:hover { background: #555 !important; }\n \n /* Selection */\n ::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ';\n }\n \n function removeDarkMode() {\n var style = document.getElementById('universal-dark-mode-style');\n if (style) style.remove();\n }\n \n // Toggle with Alt+Shift+D\n document.addEventListener('keydown', function(e) {\n if (e.altKey && e.shiftKey && e.key === 'D') {\n e.preventDefault();\n enabled = !enabled;\n if (enabled) {\n applyDarkMode();\n console.log('[Universal Dark Mode] Enabled');\n } else {\n removeDarkMode();\n console.log('[Universal Dark Mode] Disabled');\n }\n }\n });\n \n // Apply on load\n applyDarkMode();\n \n // Re-apply on dynamic content\n var observer = new MutationObserver(function(mutations) {\n if (enabled && !document.getElementById('universal-dark-mode-style')) {\n applyDarkMode();\n }\n });\n observer.observe(document.head, { childList: true });\n \n console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');\n})();", "Universal Dark Mode");
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content
BranchesTags
Repository files navigation
boot-http
Fork notes
This is an experimental fork of boot-http. You probably want the real deal over at https://github.com/pandeiro/boot-http.
Description
A simple HTTP serve task for use with the boot build tool
that can serve resources, directories or a typical ring handler.
[pandeiro/boot-http "0.8.0-SNAPSHOT"]
Usage
(The following examples assume you have boot installed and updated.)
Command line, no setup
This serves the current directory at port 3000:
boot -d pandeiro/boot-http serve -d .wait
To inspect the meanings of the flags and other tasks, use boot's built-in
documentation mechanism:
boot -d pandeiro/boot-http -h # show all tasks on the classpath
boot -d pandeiro/boot-http serve -h # show serve's usage
Within a project
If you already have a build.boot, add
pandeiro/boot-http to :dependencies
and (require '[pandeiro.boot-http :refer :all]).
You can use boot-http for three different use cases:
1. Serve classpath resources
boot serve wait# or from REPL: (boot (serve) (wait))
2. Serve files on chosen directory
boot serve -d target wait# or at the REPL: (boot (serve :dir "target") (wait))
That would serve the target directory if it exists. Instead of specifying a directory,
you can also specify a ring handler:
3. Start server with given Ring handler
boot serve -H myapp.server/app -R wait# (boot (serve :handler 'myapp.server/app :reload true) (wait))
Composability
You may have noticed the wait task being used after all the
command-line invocations so far. This is because by itself, the
serve task does not block and thus exits immediately.
What good is that? It means you can compose with other tasks.
In boot-cljs-example, for example, serve is
invoked like so:
boot serve watch speak reload cljs-repl cljs -usO none
which is, again, the same as:
(comp (serve)
(watch)
(speak)
(reload)
(cljs-repl)
(cljs:optimizations:none))
In that case, since serve is given a directory, it serves the directory and whatever
resources can be found on the classpath, and then gets out of the way.
Other options
-p / --port
Use a specific port.
boot -d pandeiro/boot-http serve -d . -p 8888 wait
-S / --server
Use a webserver other than Jetty.
Supported values are :httpkit or :aleph
boot -d pandeiro/boot-http serve -d . -S :aleph wait# uses Aleph
-n / --nrepl (Added in 0.7.0-SNAPSHOT release)
Start an nREPL server for access to the http server. Accepts
:port and :bind options for setting nREPL server IP
and port.
boot -d pandeiro/boot-http serve -d . -n "{:port 3001}"
-i / --init and -c / --cleanup
Setup and teardown functions to run.
-s / --silent
Silences all output.
-R / --reload
Wrap provided ring handler with ring-reload.
API and Roadmap
Right now that is about it. It basically blends the functionality of
python3 -m http.server and a subset of lein ring server.
Feel free to add issues or comment here if
you have any ideas.
Acknowledgements
The boot guys basically wrote all of this or walked me through any
parts I had to change. Thanks!
License
Copyright © 2015 Murphy McMahon
Distributed under the Eclipse Public License either version 1.0 or (at
your option) any later version.
About
A simple HTTP serve task for the Boot build tool
Resources
Readme
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages