Example how to use Capture2Go imu and ScienceMode4 python lib together

Introduction

Provides an example how to use SensorStim Capture2Go sensor (https://www.capture2go.com, https://github.com/sensorstim/capture2go_sdk) in combination with HASOMED´s P24 Science https://github.com/nextroundwinner/ScienceMode4Python.

This example uses data from a Capture2Go device to adjust stimulation parameters of P24.

For Capture2Go device:

• Connect to device
• Set measurement mode
• Start streaming
• Processing data
  • Calculate angle of cyclic movement
• Stop streaming
• Disconnect

For P24 device:

• Connect to device
• Initialize mid level mode
• Update stimulation parameters accoring current angle of cyclic movement
• Stop stimulation
• Disconnect

This examples expects a cyclic movement of the imu. The sensor must be attached to the bicycle crank to have enough rotation around the sensor itself.

Hints

• Adjust command line parameters name/port for both devices depending on your setup
• minimal_example.py
  • Minimal example how IMU and stimulator work together
• live_plot_example.py
  • Extended example with display of measurement data and crank angle